all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.20 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 3.20 MiB |
BioCon -900S OPERATORS MANUAL CUBEScanTM BioCon-900S Operators Manual This page left blank intentionally. Page 2 CUBEScanTM BioCon-900S Operators Manual BioCon-900S Bladder Volume Measurement System Operators Manual CAUTION : In the United States, federal Law restricts this device to sale by or on the order of a physician. This product is not made with natural rubber latex. The information in this document is subject to change at any time without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Mcube Technology. Examples or images in this document are fictitious and do not in any way represent real patient data. For up-to-date user local distributor or mcube@mcubetech.co.kr. information, contact your All other product or service names are the property of their respective owerner.. Mcube Technology Co., Ltd.
#803 123, Bonghwasan-ro, Jungnang-gu, Seoul, Korea Tel: +82-2-3421-7780 Fax: +82-2-3421-7076 E-mail: mcube@mcubetech.co.kr Web site: www.mcubetech.co.kr Copyright 2018 by Mcube Technology Co.,Ltd. All rights reserved. Page 3 CUBEScanTM BioCon-900S Operators Manual TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................ 6 1.1 1.2 1.3 1.4 1.5 PRODUCT DESCRIPTION ............................................................................................................. 6 INTENDED USE / INDICATIONS FOR USE ................................................................................... 6 PATIENT/USER CHARACTERISTICS .......................................................................................... 6 PRESCRIPTION STATEMENT....................................................................................................... 6 SERVICE ........................................................................................................................................ 6 2 SAFETY INFORMATION ........................................................................................... 8 2.1 2.2 2.3 2.4 2.5 2.6 NOTICE TO ALL USERS................................................................................................................ 8 CONTRAINDICATIONS ................................................................................................................. 8 BIOLOGICAL SAFETY .................................................................................................................. 8 ELECTRICAL SAFETY .................................................................................................................. 8 DEVICE SAFETY............................................................................................................................ 9 SAFE HANDLING PROCEDURES FOR TRANSPORTER ......................................................... 11 3 INTRODUCTION ...................................................................................................... 12 3.1 3.2 3.3 3.4 3.5 3.6 PRODUCT FEATURES ................................................................................................................ 12 SYSTEM COMPONENTS ............................................................................................................ 12 OUTER APPEARANCE PROBE ............................................................................................... 13 OUTER APPEARANCE - CHARGER .......................................................................................... 14 DISPLAY AND ICONS .................................................................................................................. 15 ICON DIRECTORY ....................................................................................................................... 15 4. SETUP ........................................................................................................................ 18 4.1 4.2 4.3 ACCURACY OF MEASUREMENT .............................................................................................. 18 CHARGE THE BATTERY ............................................................................................................. 18 SCAN TYPE .................................................................................................................................. 19 5 HOW TO USE .......................................................................................................... 20 CHECKUP BEFORE USE ............................................................................................................ 20 5.1 TURN SYSTEM ON/OFF .............................................................................................................. 20 5.2 SELECT PATIENT TYPE .............................................................................................................. 21 5.3 RECORD INFORMATION FOR A PATIENT ................................................................................. 22 5.4 MEASURE BLADDER VOLUME ................................................................................................. 24 5.5 DISPLAY A SCAN RESULTS ....................................................................................................... 26 5.6 RE-AIM BLADDER ....................................................................................................................... 28 5.7 SAVE A SCAN RESULT ............................................................................................................... 28 5.8 5.9 FETCH A MISSING DATA ............................................................................................................ 29 5.10 FINISH THE MEASUREMENT ..................................................................................................... 29 5.11 MANAGE SAVED SCAN RESULTS ............................................................................................ 29 6 SCREENS ................................................................................................................ 32 HOME SCREEN ........................................................................................................................... 32 6.1 INFORMATION SCREEN ............................................................................................................. 32 6.2 BARCODE SCREEN (OPTIONAL) .............................................................................................. 33 6.3 VIRTUAL KEYBOARD SCREEN ................................................................................................. 33 6.4 NORMAL SCAN SCREEN ........................................................................................................... 34 6.5 PRE-SCAN SCREEN ................................................................................................................... 34 6.6 SCAN RESULT SCREEN ............................................................................................................. 35 6.7 REVIEW SCREEN ........................................................................................................................ 35 6.8 6.9 SETUP SCREEN .......................................................................................................................... 36 6.10 BATTERY STATUS ....................................................................................................................... 37 6.11 DIALOG BOXES ........................................................................................................................... 38 7 SETTINGS ............................................................................................................... 39 7.1 7.2 DATE FORMAT SETTINGS .......................................................................................................... 39 DATE SETTINGS .......................................................................................................................... 39 Page 4 CUBEScanTM BioCon-900S Operators Manual TIME SETTINGS ........................................................................................................................... 39 SLEEP MODE SETTINGS ............................................................................................................ 40 DISPLAY BRIGHTNESS SETTINGS ........................................................................................... 40 PRE-SCAN SETTINGS ................................................................................................................ 41 DELETE ALL MEASUREMENTS ................................................................................................ 41 7.3 7.4 7.5 7.6 7.7 8 MAINTENANCE ....................................................................................................... 43 TROUBLESHOOTING ................................................................................................................. 43 8.1 DIALOG BOXES FOR MAINTENANCE....................................................................................... 43 8.2 CLEANING & DISINFECTION ..................................................................................................... 44 8.3 BATTERY MAINTENANCE .......................................................................................................... 46 8.4 8.5 WEEKLY INSPECTION ................................................................................................................ 46 DISPOSAL .................................................................................................................................... 46 8.6 DEVICE REPAIR .......................................................................................................................... 46 8.7 8.8 SELF TEST ................................................................................................................................... 47 CALIBRATION ............................................................................................................................. 48 8.9 9 SPECIFICATIONS ................................................................................................... 51 9.1 9.2 9.3 9.4 9.5 ACOUSTIC OUTPUT TABLE ....................................................................................................... 51 ELECTROMAGNETIC COMPATIBILITY ..................................................................................... 51 EXCESSIVE TEMPERATURE TEST RESULT ............................................................................ 54 SPECIFICATIONS OF COMPONENTS ....................................................................................... 54 ENVIRONMENTAL CONDITIONS ............................................................................................... 56 10 GLOSSARY ............................................................................................................. 58 11 SYMBOL DIRECTORY ............................................................................................ 59 12 REFERENCES ......................................................................................................... 61 Page 5 CUBEScanTM BioCon-900S Operators Manual PRODUCT DESCRIPTION GENERAL INFORMATION 1 1.1 CUBEScanTM BioCon-900S is a safe and easy, non-invasive system to measure the bladder volume. The device consists of a probe, CUBEScan Charger, and various components. The probe is a B-mode instrument, hand-held, wireless and battery-operated. A 3D-mechanical sector transducer provides cross sectional images of the bladder from up to 12 scan planes and bladder volume is calculated based upon those images and displays 12 scan planes on a screen. Furthermore, a live image of the bladder during Pre-scan makes it easier to detect the bladder before scanning. The CUBEScan Charger is used for recharge of the probes internal battery. 1.2 CUBEScanTM BioCon-900S is a B-mode pulsed-echo ultrasound device. The BioCon-900S projects ultrasonic energy through the lower abdomen of a patient to obtain images of the bladder to calculate the urine volume non-invasively. BioCon-900S is intended to be used by a qualified medical professional to non-invasively measure the urine volume in the bladder. Contraindications for the BioCon-900S are fetal use and use on pregnant patients. 1.3 1.3.1 1) Male (All other patients) 2) Female patient PATIENT/USER CHARACTERISTICS PATIENT POPULATION INTENDED USE / INDICATIONS FOR USE
- A female who has not had a hysterectomy
- A female who has had a hysterectomy 3) Pediatric patient; A child with height less than 47 inches (120cm) and weight less than 55 lbs (25kg) 1.3.2 1) Physicians 2) Medical Professionals USERS MEDICAL CONDITIONS INCLUDING TARGET GROUP AND DISEAS 1.3.3 Bladder volume measurement system measures bladder volume, and it provides the accurate data to aid in the diagnosis of common urological condition, to assess urinary retention, to help unnecessary catheterization and to reduce rates of catheter-associated urinary tract infection. The benefits are as below;
BioCon-900S assists to;
a. Assess urinary retention b. Evaluate post-operative urinary retention (POUR) c. Reduce unnecessary catheterization d. Reduce catheter-associated urinary tract infections(CAUTIs) e. Identify a blocked Foley catheter f. Evaluate the need to catheterize after Foley catheter removal g. Evaluate the need to catheterize during intermittent catheterization h. Support to train urination and self-cathererization i. Measure PVR (Post Void Residual) PRESCRIPTION STATEMENT 1.4 Federal (United States) law restricts this system to sale by or on the order of a physician. 1.5 SERVICE Page 6 CUBEScanTM BioCon-900S Operators Manual If you encounter difficulty with the system, please contact local distributers or Mcube Technology at mcube@mcubetech.co.kr Page 7 CUBEScanTM BioCon-900S Operators Manual NOTICE TO ALL USERS SAFETY INFORMATION 2 2.1 This guide covers components, function, maintenance, storage, and precautions needed to use this system. All users must read and thoroughly understand this entire guide prior to using the BioCon-900S. This section has information on safe use of the BioCon-900S (Biological Safety, Electrical Safety, Device Safety and Safe handling procedures for transporter). Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. 2.2 CONTRAINDICATIONS WARNING BIOLOGICAL SAFETY Do not use the BioCon-900S on following cases:
1) Fetal use or pregnant patients. 2) Patients with ascites. 3) Patients with open or damaged skin. Wounds in the suprapubic region. 2.3 To date, exposure to pulsed diagnostic ultrasound has not been shown to produce adverse effects. However, ultrasound should be used only by medical professionals when clinically indicated, using the lowest possible exposure times possible commensurate with clinical utility. The ultrasonic output power of BioCon-900S is limited to the minimum level necessary for performance effectively. Data on acoustic output levels is listed in section 9. Specifications. 2.4 This system meets IEC 60601-1, Class I, Type BF isolated patient-applied parts safety requirements. This system complies with the applicable medical device requirements published in the Canadian Standards Association (CSA), European Harmonized Standards, and Underwriters Laboratories (UL) safety standards. To avoid the risk of electrical shock or injury, observe the following warnings and cautions. ELECTRICAL SAFETY WARNING To avoid the risk of electric shock, this device must only be connected to an adapter with the protective earth. - Grounding reliability can only be achieved when device is connected to a receptacle marked Hospital Only or Hospital Grade or the equivalent. Do not operate the system in the presence of flammable gases or anesthetics. Do not use the device with any defibrillator at the same time. Do not use the device with any HF surgical equipment at the same time. Before using the system, inspect the enclosures, power cord and adapter.Do not use the system if these are damaged. Do not use the probe if the entire probe is accidentally immersed in solution. Connect only items that have been specified as part of the BioCon-900S or that have been specified as being compatible with the BioCon-900S. Charge the probe only with the provided Charger. Connect the Charger only to the provided adapter. Page 8 CUBEScanTM BioCon-900S Operators Manual Do not attempt to open the system components. This may cause serious injury to the operator or patients. All services must be made by a qualified technician only. Use of components and cables other than those specified or provided by the manufacturer of this device could result in increased electromagnetic emissions or decreased electromagnetic immunity of this device and result in improper operation. Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the BioCon-900S, including cables specified by the manufacturer. Otherwise, degradation of the performance of this device could result. CAUTION The BioCon-900S has been tested and found to comply with the electromagnetic compatibility (EMC) limits for medical systems to IEC 60601-1-2. These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. Medical systems must be installed and operated according to the instruction in this manual. For more information, see the section 9.2 ELECTROMAGNETIC COMPATIBILITY. This device is suitable for use in the professional health care environment Medical electric devices can be affected by portable or mobile RF communication devices. Turn off any portable or mobile RF device before operating your system. Electrostatic discharge (ESD), or static shock, is a naturally occurring phenomenon. ESD is common in conditions of low humidity, which can be caused by heating or air conditioning. Static shock is a discharge of electrical energy from a charged body to a lesser or non-charged body. The degree of discharge can be significant enough to cause damage to a transducer or an ultrasound system. The following precautions can help reduce ESD: anti-static spray on carpet, anti-static spray on linoleum, and anti-static mats. The EMISSIONS characteristics of this device make it suitable for use in industrial areas and hospitals
(CISPR 11 class A). If it is used in a residential environment (for which CISPR 11 class B is normally required) this device might not offer adequate protection to radio-frequency communication services. The user might need to take mitigation measures, such as relocating or re-orienting the device. Do not use the system if an error message appears on the display: note the error code; call Mcube technology or your local distributor, shut down the system 2.5 To protect your BioCon-900S, and components, follow these warnings and cautions. DEVICE SAFETY WARNING No modification of this device is allowed. Do not use the system if the head of probe is damaged. To avoid the risk of excessive heating or damage to the device, use the device in a well-ventilated environment. To avoid damage to cables, do not excessively twist or bend cables associated with the device. Turn off the device and unplug the charger if it will not be used for a long period of time. Do not use the system if there is evidence of leakage of internal liquids. Wash hands immediately in warm, soapy water. In the event that LCD is damaged, care should be taken to avoid contact with liquid crystal. Take the urgent action indicated should any of the following situations arise:
- If liquid crystal comes in contact with your skin, clean the area with a cloth and then wash thoroughly with soap and running water. Page 9 CUBEScanTM BioCon-900S Operators Manual
- If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15 minutes and then seek medical assistance.
- If liquid crystal is swallowed, rinse your mouth thoroughly with water. Drink large quantities of water and induce vomiting, then seek medical assistance. CAUTION Use the system indoors only. Do not use the system if it exhibits erratic or inconsistent behavior. Shut down the system and contact Mcube Technology or your local distributor. COMPLIANCE STATEMENTS Do not spill liquid on the system. 2.6 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IC Statement This Class A digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. Page 10 CUBEScanTM BioCon-900S Operators Manual SAFE HANDLING PROCEDURES FOR TRANSPORTER 2.7 Quarantine: Packages that are crushed, punctured or torn open to reveal contents should not be placed into deployment. Such packages should be isolated until the shipper has been contacted, provides disposition instructions and, if appropriate, arranges to have the product inspected and repacked. Spoiled Product: In the event that damage to packaging results in damage to the battery causing released electrolyte, the spill should be contained and the shipper should be contacted for instructions. Page 11 CUBEScanTM BioCon-900S Operators Manual INTRODUCTION 3 3.1 The main components of CUBEScanTM BioCon-900S are a Probe and the Charger. PRODUCT FEATURES BioCon-900S Probe & Charger Hand-held, portable and lightweight Touchscreen interface Measures bladder volume with ultrasound Provides a live image of bladder during Pre-scan Takes scans and provides scan results in a short time Easy to use: staff can easily learn how to scan patients in a short time Battery-operated, wireless charging Figure 1 CUBEScanTM BioCon-900S 3.2 SYSTEM COMPONENTS No. Picture Parts Qty Description 1 2 3 4 5 BioCon-900S
(Probe) 1 Hand-held, wireless, battery-operated, touchscreen, ultrasound probe Charger 1 the Charger Use 900Ss internal battery. to charge BioCon-
Mobile Cart
(MRC-900S) 1 Mobile cart
(Optional Component) AC/DC Adapter 1 Use only with the Charger. Power cord 1 The type of power cord depends on your country. Page 12 6 7
-
-
CUBEScanTM BioCon-900S Operators Manual Barcode Module 1 Reading a barcode with information for a patient. (Optional Component) Operators manual 1
-
Users can replace only gel The other parts are not allowed for the users to disassemble or replace except the gel. Please contact your local distributor or Mcube Technology. Only use the ultrasonic gel approved by FDA, CE. 3.3 OUTER APPEARANCE PROBE Figure 2 Probe Appearance No. Part Function 1 2 3 4 5 Touchscreen Display Displays bladder volume and other information. Power Button Press to turn the probe on or off and release Scan Button Press to take a scan Probe Head Power Indicator Generates, transmits and receives ultrasound waves, produces a 3D image of bladder. Type BF applied part Indicates power status. Orange solid System is being booted Yellow solid Power on status Off Power off Page 13 CUBEScanTM BioCon-900S Operators Manual Battery indicator Indicates charging status. Orange solid - Battery is being charged. Off Battery is fully charged. Barcode Module Reads printed a barcode Laser Safety Label Explanatory label Class 1 laser product Label Put on this label when there is no optional barcode module 6 7 8 9 10 Back Label NOTE : Labels are subject to change without prior notice NOTE: The appearance of these labels(No.8 - 9) depends on wheter the barcode option is selected or not. 3.4 OUTER APPEARANCE - CHARGER Figure 3 Charger Front-View Figure 4 Charger Bottom-View No. Item Function Battery indicator Indicates charging status. Green (Solid) Power cord is connected or Charging is completed. Green (Blink) Charging.in progress Yellow (Solid) Error Status Silicone pad Anti-skid pad Insert Nut Insert nut to secure the Charger to the mobile cart (MRC-900S). It prevents movement or damage of Charger from shock. Label NOTE : Labels are subject to change without prior notice AC/DC Adapter Inlet AC/DC adapter inlet Vents Ventilate the Charger. 1 2 3 4 5 6 Page 14 CUBEScanTM BioCon-900S Operators Manual DISPLAY AND ICONS 3.5 A touch-screen display allows you to perform scans, manage results and setup. The Home screen appears when the probe is turned on. It services as a starting point for all the main functions of the device. You can select the desired icons by tapping them directly on the touch-screen. No. 1 Description Status Current time, the number of saved data and battery status. 2 Main Display controls the user interface Figure 5 Home Screen ICON DIRECTORY 3.6 Patient Type Icon Male (All other patients) Description Home screen Icon Female Patient A female who has not had a hysterectomy Female Patient A female who has had a hysterectomy Pediatric Patient A child with height less than 47 inches (120cm) and weight less than 55 lbs(25kg). Review Go to the Review screen. Description Missing Data Go to review the missing (unsaved) scan result. Setup Go to the Setup screen. Battery status. Information screen & Pre-scan screen Page 15 CUBEScanTM BioCon-900S Operators Manual Icon Description Barcode - Record a barcode (Optional) Home Return to the Home screen. Scan Perform the Normal scan or Pre-scan. Exit Return to the Information screen. Scan Result screen Icon Description Aiming Information Rotate 15 clockwise, indicating the aiming point of the bladder. Urine Volume Measured urine volume. Plane No. The 1st plane of 12 planes of the result (PX The ordinal number of 12 planes) Scan Re-scan the bladder. Home Return to the Home screen. Save Save the scan result. P1 Review screen Icon Delete On the Review screen, delete what is currently being displayed. Description OK Select the option or perform the action. Cancel Cancel the current function. Previous On the Review screen, move to the previous patient scan result. Next On the Review screen, move to the next patient scan result. Exit Return to the Home screen. Setup screen Icon Date format (YY-MM-DD, DD-MM-YY,MM-DD-YY) Description Date Time (format : 24-hour) Page 16 CUBEScanTM BioCon-900S Operators Manual Sleep mode (2min, 3min, 5min) Display brightness (0 to 100%, default= 50%)) Pre-scan On (
) / Off (
) Delete all saved results. Calibration Reminder On (
) / Off (
) Self-test (YY/MM/DD) Phantom Calibration (YY/MM/DD) CalKit Calibration (YY/MM/DD) On the self-test or calibration screen, perform self-test or calibration Cease On the self-test or calibration screen, cease self-test or calibration Exit Return from the self-test or calibration screen to the Setting screen. Previous Move to previous page. Next Move to next page. Home Return to Home screen. OK Select the option or perform the action. Cancel Cancel the current function. Page 17 CUBEScanTM BioCon-900S Operators Manual 4. SETUP See the section 4.1 ACCURACY OF MEASUREMENT before use. Check the probes battery has sufficient power through battery icon. If the battery has not been sufficiently charged, recharge the battery before bladder measurement. Wipe the probe head gently with a soft cloth dampened in cleaning and disinfection agents to clean and disinfect the probe. See the section 8.3 CLEANING & DISINFECTION. ACCURACY OF MEASUREMENT 4.1 Following cases affect ultrasound transmission and accuracy of measurement. When a patient has had supra-pubic or pelvic surgery. A patient with catheter in his or her bladder. A patient with scar, sutures, staples or incisions in his or her abdomen. Use of unsuitable ultrasound gel . Air bubbles between probe head and the skin of the patient. An excessive obese patient. Use of the probe with an unclean probe head. Inappropriate patient position. 4.2 CHARGE THE BATTERY WARNING The battery must be replaced by the authorized service provider only. Use only the provided Charger and power cord to charge the battery for electric safety. Do not disassemble, heat or incinerate the battery. Keep battery out of reach of children and in original sealed package. Dispose of used batteries promptly according to local recycling or waste regulations. To reduce the risk of leakage, explosion, fire, or serious injury, note the following when handling the lithium-ion battery included in the system:
- Never short-circuit the battery by either accidentally or intentionally bringing the battery terminals into contact with any other conductive objects. This could cause serious injury or fire and could also damage the battery and BioCon-900S.
- Never expose the battery to abnormal shock, vibration or pressure. The batterys internal protective covering could fail, causing it to overheat or ignite, resulting in caustic liquid leakage, explosion or fire. Avoid charging near fire or in the sunlight. Do not use the Charger for other equipment. CAUTION The Charger, power cord, and adapter are not intended for patient contact. Ensure 6 ft (2 m) are maintained between the patient and these components. Immediately discontinue use of the battery, if the battery emits an unusual smell, feels hot, changes color or shape, or appears abnormal in any other way. Contact Mcube Technology or your local distributors. The probe is powered by a internal lithium ion battery. The battery is charged by Charger and the Battery Page 18 CUBEScanTM BioCon-900S Operators Manual Status icon (
) is always displayed in the Status at the top of the screen, indicating the current capacity. Before using the probe for the first time, you must fully charge the battery. When you dont use your probe, we recommend that you mount and store it on the Charger to ensure that the probe is sufficiently charged. The battery is protected by protection circuit module and have the functions of overcharge, overdischarge and overcurrent prevention to maintain safety and prevent significant deterioration of cell performances. To conserve battery life, the probe is configured to go into sleep mode. The probe goes into sleep mode when you press the Power Button(
) twice or if the probe has not been touched in the designated time with power on. You can adjust the time for sleep mode in the setup(2min/3min/5min), if necessary. See the section7.4 SLEEP MODE SETTING. Shortly press the Power Button(
) to wake up the system. Figure 6 Probe-mounting Figure 7 Probe Indicatior Figure 8 Charger Indicator 1) Connect the AC/DC adapter to the power cord. 2) Connect the AC/DC adapter to the Charger 3) Plug the AC/DC adapter into an electric outlet 4) The battery indicator (3) on the Charger lights on in steady green (Power on). 5) Mount the probe on the Charger. Make sure that the upper part of probe reaches the wall of Charger. See Figure 5. 6) As soon as the probe is mounted on the Charger, the beep and light indicators work as below;
a) A short beep: A connection for the probes battery charging is completed. b) The battery indicator (3) on the Charger lights on in blinking green(Charging in progress). c) The battery indicator (2) on the probe lights on in steady orange (Charging in progress). 7) The Power indicator (1) is turned on in steady yellow when the probe is ready to use. 8) It takes approximately 6 hours for the discharged battery to fully charge. When fully charged, the battery indicator(2) on the probe turns off. SCAN TYPE 4.3 You can adjust one of the following options to measure bladder volume:
Pre-scan: General 2D real-time ultrasound scanning. 2D ultrasound images are displayed continuously in live image basis. This helps an operator locate bladder position and predicting the range of residual urine to detect the bladder before normal scan. Normal Scan: Get 12-plane ultrasound images and calculate the residual urine in the bladder (3D scanning). Page 19 CUBEScanTM BioCon-900S Operators Manual CHECKUP BEFORE USE 5 HOW TO USE 5.1 Before using BioCon-900S, ensure you are familiar with the device and its parts. If you use it for the first time, we strongly recommend you to try your first bladder volume measurement on a patient with moderately full bladder using Pre-scan. Pre-scan helps you detect the bladder and moderately full bladder can be located more easily. WARNING If you use BioCon-900S in the presence of flammable anesthetics, explosion hazard exists. Do not use the BioCon-900S on following cases:
1) Fetal use or pregnant patients. 2) Patients with ascites. 3) Patients with open or damaged skin. 4) Wounds in the suprapubic region. CAUTION If the oil leaks from housing and fluid gets in contact with your eyes, skin or clothing, flush the affected area immediately with clean water and seek medical attention or see a doctor. 5.2 There are two power modes to system on/off the BioCon-900S. Loading screen depends on the power mode and it shows during start-up. TURN SYSTEM ON/OFF Figure 10 Loading Screen (2) Figure 9 Loading Screen (1) 5.2.1 To preserve battery power, the probe goes into sleep mode by shutting itself down automatically when not in use. You can set the time to go into sleep mode in the setup (2min/3min/5min). See the section 7.4 SLEEP MODE SETTING. Figure 11 Home Screen SLEEP MODE However, if a battery needs to be recharged immediately, Dialog box (
) appears shortly and then probe goes to sleep mode by shutting itself down. We strongly recommend that you should recharge the battery immediately. See the section 4.2 CHARGE THE BATTERY. Turn System on Page 20 CUBEScanTM BioCon-900S Operators Manual 1) Press the Power Button (
2) Only Loading screen (2) appears on the display. 3) Home screen appears when the system is fully loaded at start up. Turn System off
) shortly to wake the probe from sleep mode. 1) Press the Power Button (
) shortly twice to go into sleep mode. SHUTDOWN MODE 5.2.2 The probe draws little power when it is gone into sleep mode. To preserve battery power, the probe shuts down the system in approximately 24 hours after going into sleep mode, if there is no activity. However, if you do not plan to use the probe for more than a week, you should shut the system down completely to prevent it from discharging completely Turn System on
) shortly to wake the probe from shutdown mode. 1) Press the Power Button (
2) Loading screen (1) appears on the display and Loading screen (2) follows shortly. 3) Home screen appears when the system is fully loaded at start up Turn System off 1) Press the Power Button(
2) A Shutdown dialog box appears on the Home screen. 3) Ths system shut down shortly after Shutdown screen appears.
) for 3~4 seconds. Figure 12 Shutdown Dialog Box Figure 13 Shutdown Screen SELECT PATIENT TYPE 5.3 BioCon-900S has several patient types. Tap the Patient icon on the Home screen to select the patient type. 1) 2) Male (All other patients) Female patient Select if you are scanning a female patient. If you select the female patient type on the Home screen, the BioCon-900S allows you more granularity in chosing an female patient type on the Information screen. Select female patient by tapping the (1) of Figure 23.
- A female who has not had a hysterectomy (
)
- A female who has had a hysterectomy (
) 3) Pediatric patient Select if you are scanning a child with height less than 47 inches (120cm) and weight less than 55 lbs. (25kg). Page 21 CUBEScanTM BioCon-900S Operators Manual Figure 14 Patient Type Figure 15 Female Patient Type RECORD INFORMATION FOR A PATIENT INPUT INFORMATION VIRTUAL KEYBOARD 5.4 5.4.1 The Information screen appears when you tap one of the Patient icon on the Home screen. You can tap the text box and update information for a patient by typping the virtual keyboard. The virtual keyboard screen appears depend on the text box you select. See the section 6.4 VIRTUAL KEYBOARD SCREENon for information about the function of the virtual keyboard. You can scan a bladder volume without entering patient information. If you do not enter a patient information, the patinet tag content(2) is empty on the Scan Result screen. Scanned date and time(1) automatically display and it is based on your probes time settings. Once a scan result is saved, you cannot add or modify patient information. You can measure bladder volume by tapping the Scan icon(
) on the Information screen or pressing the Scan Button
. If you want to return to the Home screen, tap the Home icon(
) Figure 16 Information Screen Figure 17 Scan Result Screen Patient Tag Tap Patient Tag text box, and then enter the patients tag by typping the virtual keyboard Page 22 CUBEScanTM BioCon-900S Operators Manual First Name Tap First Name text box, and then enter the patients first name by typping the virtual keyboard Sur Name Tap Sur Name text box, and then enter the patients sur name by typping the virtual keyboard If you would like to the change the virtual keyboard type, tap Keyboard icon (
virtual keyboard. The icon allows you to select an numeric, uppercase or lowercase virtual keyboard.
) in the left corner of the Figure 19 Letter Key (Lowcase) Figure 18 Numeric Key Date of Birth Tap Date of Birth text box, and then enter the patients birthday by typping the virtual keyboard Figure 20 Letter Key (Uppercase) Figure 21 Date Key 5.4.2 The CUBEScanTM BioCon-900S can attach an optional barcode module. Installing the optional barcode module on the device allows you to record a patient tag as necessary. Skip Skip this section if you do not INPUT INFORMATION OPTIONAL BARCODE enter patient information through a barcode or if you do not have a barcode reader. Page 23 CUBEScanTM BioCon-900S Operators Manual WARNING LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM Do not capture human being with the barcode module. Hold the probe with both hands tightly, when you read barcodes with patient information. Recording barcodes is not available, after the scan result is saved. Figure 22 Information Screen Figure 23 Barcode Scan Screen How to read a barcode 1) Tap the Barcode icon(
) on the Information screen. 2) Move the aiming position to the center of the barcode and press the Scan Button 3) A red light guide is emitted. with thumb. 4) Keep pressing the Scan Button 5) The barcode reader decodes continuously for a good barcode scan. 6) You have a good barcode with a short beep. The barcode numbers is displayed on Patient Tag of the Information screen. and do not release until getting barcodes.
<good>
<bad>
5.5 5.5.1 NORMAL SCAN MEASURE BLADDER VOLUME The normal scan is executed only when Pre-scan setup is Off(
7.7 PRE-SCAN SETTING 1) The patient should be lying in a supine position and lift up the patient garment exposing the abdominal
) on the Setup screen. See the section region from the pubis to the navel. 2) Place an ample amount of gel without air bubbles to the probe head. In order to assure optimal transmission of energy between the patient and the probe, a conductive gel must be applied on the probe head. 3) Place the probe head on the patients abdomen with the screen facing upwards and aim it to the location where the bladder is expected to be above 3~4cm the pubic bone. 4) Ensure that the probe head is pointing toward the patients foot. Page 24 CUBEScanTM BioCon-900S Operators Manual Figure 24 Positioning Bladder Figure 25 Probe Direction 1) Tap the Scan icon(
) on the Information screen or press the probe Scan Button
. The scanning process begins. 2) The progress bar on the screen appears. It takes 3 seconds to complete the normal scan. Hold the probe steady while scanning. Movement of the probe during scanning reduces the accuracy of measurement. 3) When you hear the beeps, the scan is complete. Figure 26 Normal Scan Process 5.5.2 PRE-SCAN The Pre-scan is executed only when Pre-scan setup is ON(
) on the Setup screen. When Pre-scan is
), a normal scan is executed. See the section 7.7 PRE-SCAN SETTING Off(
1) The patient should be lying in a supine position and lift up the patient garment exposing the abdominal region from the pubis to the navel. 2) Place an ample amount of gel without air bubbles to the probe head. In order to assure optimal transmission of energy between the patient and the probe, a conductive gel must be applied on the probe head. 3) Place the probe head on the patients abdomen with the screen facing upwards and aim it to the location where the bladder is expected to be above 3~4cm the pubic bone. 4) Ensure that the probe head is pointing toward the patients foot. Page 25 CUBEScanTM BioCon-900S Operators Manual Figure 27 Positioning Bladder Figure 28 Probe Direction 5) Tap the Scan icon(
) on the Information screen or press the probe Scan Button to start Pre-
scan. A Pre-scan image such as 2D ultrasonic image appears on the probe screen. No. Description 1 Center Line 2 Bladder point:
to easily recognize the bladder. It helps NOTE:
It is not 100%
guaranteed that the pointer shows in all cases the bladder 3 Depth Line: Max detection depth to measure a padiatric patients bladder volume. Exit Icon 4 Figure 29 Pre-scan Screen 6) To locate the bladder, keep the probe contacted the abdomen. And tilt the probe slowly back and forth, side to side. The position where the bladder image is the largest and most centered is the optimal place to start the normal scan process. Locate the bladder along the centerline(1) on the Pre-scan screen. It helps detect the optimal position during Pre-scan. Figure 30 Normal Screen NOTE: Depth Line(3) is not displayed for male and female patient type. 7) If you want to stop the Pre-scan and return to the Information screen, tap the Exit icon(
). 8) Press the Scan Button again or tap the Pre-scan screen. The progress bar on the screen appears. It takes 3 seconds to complete the normal scan Hold the probe steady while scanning. Movement of the probe during scanning reduces the accuracy of measurement. DISPLAY A SCAN RESULTS 9) When you hear the beeps, the scan is complete. 5.6 After a scan has been completed, the Scan Result screen appears. The Scan Result screen includes the following information:
Current Urine Volume Maximum Urine Volume Patient Type & Tag Scan Date & Time Bladder Planes Aiming Information Page 26 CUBEScanTM BioCon-900S Operators Manual Figure 31 Scan Result Screen 5.6.1 BLADDER VOLUME View the bladder volume displayed in milliliters (ml). The Urine Volume icon(
shows the maximum volume from multiple results for one patient.
) shows the measured urine volume. (1) shows the most recent volume and (2) 5.6.2
(3) shows the date and time on the current scan.
(4) shows the patient tag entered on the Information screen. PATIENT INFORMATION AND SCAN DATE & TIME 5.6.3 BLADDER PLANES Tap the bladder plane repeatedly with your finger to check other 12 planes of bladder on the Scan Result screen, if necessary. At the same time, the Aiming information (crosshair) is rotated clockwise by 15 and displayed the 2nd&8th planes, 3rd&9th, 4th&10th, 5th&11th, 6th&12th planes of bladder in order. If these planes bladder is not centerd in the target or too small, we recommend that you scan the bladder again. See the section 5.7 RE-AIM BLADDER. Figure 32 Planes & Aimming Information Page 27 CUBEScanTM BioCon-900S Operators Manual RE-AIM BLADDER 5.7 If the bladder is not centerd in the target or too small, you can re-aim and re-scan the bladder before saving the scan result. We strongly recommend that you re-aim and re-scan more than one time for accuracy. Figure 33 Incorrectly Positioned The crosshair helps how to re-aim and the guiding arrows show that the user has to move or tilt the probe for a more accurate scan. If the bladder appears in the center of the crosshair, press the Scan Button or tap the Pre-scan part of the screen. Figure 34 How To Re-aim 5.8 SAVE A SCAN RESULT When you do not need to scan again, you can save the currently displayed scan result. And also missing scan result can be saved after fetching the missing scan result. See the section 5.9 FETCH A MISSING DATA. To save the scan results, tap the Save icon (
scan result is saved successfully.
) below the display. The Home screen appears after the Page 28 CUBEScanTM BioCon-900S Operators Manual 5.9 FETCH A MISSING DATA If you did not save a scan result and return to the Home screen, the Missing Data icon (
) appears on the Home screen. Tap the Missing Data icon (
) to fetch the unsaved scan result. The Scan Result screen on the missing data appears. The performances below make the Missing Data icon(
1) Fetch and save the missing scan result. 2) A new normal scan is performed.
) disappear. Figure 35 Home Screen FINISH THE MEASUREMENT 5.10 After finishing scanning, take the probe away from the patient and then wipe the ultrasound gel off the probe. See the section 8.3 CLEANING & DISINFECTION When the probe is not in use, press the Power Button(
then mount it for charging internal battery in the Charger. 5.11 MANAGE SAVED SCAN RESULTS
) twice to place the system in sleep mode and 1) The scan results are saved to the internal memory of BioCon-900S Probe. If you scan the patient several times using the probe, the lagest result is saved. Information can be entered and modified before the scan result is saved, but once the scan result is saved, patient information can not be modified 2) If you want to delete the saved scan result, see the section 5.11.2 DELET A SAVED SCAN RESULT 5.11.1 REVIEW A SCAN RESULT 1) The Review screen is displayed when you tap the Review icon (
2) The Review screen opens, it shows the urine volume, ultrasound images and other saved information.
) on the Home screen. 3) Previous & Next icon (
,
) allow you to review the scan results of the other patients. 4) Delete & Exit icons (
,
) allow you to delete the current reviewing results or return to the Home screen. 5) Tap the (1) area to review the information you entered for the patient. Page 29 CUBEScanTM BioCon-900S Operators Manual Figure 36 Home Screen 5.11.2 DELETE A SAVED SCAN RESULT Figure 37 Review Screen 1) The Review screen is displayed when you tap the Review icon (
) on the Home screen. 2) Select the scan result you want to delete by tapping Previous & Next icon (
,
). 3) Tap the Deletion icon (
) and a Delete Confirm dialog box (
) appears. 4) Tap the OK icon (
) to delete the scan result or Tap the Cancel icon (
) to cancel. Figure 38 Review Screen Figure 39 Delete Scan Result 6) If you delete the last scan result, Empty Foder dialog box (
) appears and BioCon-900S returns to the Home screen. 7) If you tap the Review icon when there is no scan result, Empty Folder dialog box (
) appears on the Home screen. 8) You can delete all results in probes internal memory at one time, if you want. See the section 7.8 DELETE ALL MEASUREMENTS for information on deleting all scan results NOTE: The scan results are saved to the internal memory, which can store 50 data. If you exceed this limit, the system deletes the oldest data to accommodate the new data. Page 30 CUBEScanTM BioCon-900S Operators Manual Figure 40 Delete Last Scan Result Figure 41 Empty Folder Dialog Box Page 31 CUBEScanTM BioCon-900S Operators Manual HOME SCREEN 6 SCREENS 6.1 Turn the probe on and the Home screen appears. It shows the main functions of the probe. The icons below on the screen allow you to select patient type, go to the Review screen or go to the Setup screen. No. Description 1 Time 2 Number of Saved Data / Internal Storage (50) 3 Battery Status 4 Model Name Patient Type Icons 5 6 Review Icon 7 Setup Icon Figure 42 Home Screen INFORMATION SCREEN 6.2 The Information screen is used to enter patient data. See the section 5.4.1 INPUT INFORMATION VIRTUAL KEYBOARD for information on completing on the text box if you want. Figure 43 Information Screen
(All) Figure 44 Information Screen
(Female) Figure 45 Information Screen
(Pediatric) Page 32 CUBEScanTM BioCon-900S Operators Manual BARCODE SCREEN (OPTIONAL) 6.3 The Barcode screen is used to record data by scanning barcode with patient information. See the section 5.4.2 INPUT INFORMATION OPTIONAL BARCODE for more information if you want. Figure 46 Information Screen
(Optional Barcode) Figure 47 Barcode Screen 6.4 BioCon-900S has three different virtual keyboard types; Numeric, Letter(Uppercase, Lowcase), and Date. VIRTUAL KEYBOARD SCREEN Figure 48 Numeric Keyboard Icon Description Figure 49 Letter Keyboard Figure 50 Date Keyboard Numeric and Letter Keyboard - Delete a character to the right of the cursor. Date Keyboard Move the cursor to the left Delete all characters. Convert a string on a virtual keyboard. Exit the Virtual Keyboard screen after updating edited characters. Page 33 CUBEScanTM BioCon-900S Operators Manual Add a space. Exit the screen after recovering previous characters. NORMAL SCAN SCREEN 6.5 Normal scan - Get 12-plane ultrasound images and calculate the residual urine in the bladder (3D scanning). It takes 3 sec to complete the Normal scan. As bladder volume is calculated, the progress bar increases until the scan is completed. Figure 51 Normal Scan Screen 6.6 Pre-scan- 2D ultrasound images are displayed continuously in live image basis. This helps an operator locate bladder position and predict the range of residual urine. And also the centerline is provided during Pre-scan. Locate the bladder along the centerline on the screen. It helps detect the optimal position during Pre-scan. PRE-SCAN SCREEN The Pre-scan is executed only when Pre-scan setup is ON (
Normal scan is executed.
). When Pre-scan is OFF (
), a No. Description 1 Centerline. 2 3 4 5 Bladder point Max detection depth to measure a pediatric urine volume. Cease the Pre-scan and return to the Information screen. Tap executed. the Pre-scan screen, the Pre-scan is Figure 52 Pre-scan Screen (Default) Page 34 CUBEScanTM BioCon-900S Operators Manual SCAN RESULT SCREEN 6.7 The Scan Result screen appears automatically when a normal 3D measurement is complete. The aiming information (crosshair) helps you verify the Scan result. The icons below on the display allow you to review other planes of the same measurement, return to the Home screen, and save the measurement. Also if you want to recan the bladder, tap the Re-Scan icon(
). Figure 53 Scan Result (All) Figure 54 Scan Result (Female) Figure 55 Scan Result (Pediatric) No. Description 1 Time 2 Number of Saved Data / Internal Storage (50) 3 Battery Status 4 Aiming Information(Crosshair) 5 Measured Date & Time 6 Patient Tag 7 The first plane of 12 planes 8 Save 9 Home 10 Re-Scan 11 Current Volume from Multiple Results 12 Maximum Volume from Multiple Results 13 Patient Types (
14 Bladder Outline
) 6.8 Figure 56 Scan Result Screen 15 Max detection depth to measure a urine volume (Only pediatric patient) REVIEW SCREEN
) on the Home screen, Review screen appears Tap the Review icon(
The Review screen shows the bladder volume, ultrasound images and other saved information with the saved scan results. While reviewing the result, the menu icons below on the display allow you to delete the current reviewing result or return to the Home screen. If you want to review the scan results of other patients, tap the (9) icons. of saved results. For example, 3/49 means the 3rd saved scan result of the 49 stored results.
(11) shows the chronological order of saved results and the total number Page 35 CUBEScanTM BioCon-900S Operators Manual Figure 57 Review Screen No. Description 1 Time 2 Number of Saved Data / Internal Storage (50) Battery Status Aiming /information(Crosshair) 3 4 5 Measured Date & Time 6 7 8 Delete Icon 9 10 Exit Icon Patient Tag The first plane of 12 planes Previous & Next Patient Icon 11 Chronological Order of Saved Results / Total Order of Saved Results 12 Bladder volume
) 13 Patient Types (
14 Bladder Outline 15 Centerline (helps detect the optimal position) 16 First Name & Sur Name 17 Date of Birth 18 Delete Dialog Box 19 OK Icon 20 Cancel Icon Figure 58 Review Screen - Delete 6.9 SETUP SCREEN Tap the Setup icon (
In the Setup screen the left column shows the Setup Items and the right column shows the Setup Values. For more information on the system setting, see the section 7. SETTINGS
) on the Home screen. Page 36 1) Tap a Setup Value of the desired setup item. 2) Tap repeatedly a setup value untile desired setup value. 3) You can move to other Setup screen (1, 2, 3) by tapping the Previous or Next icon (
,
) CUBEScanTM BioCon-900S Operators Manual 4) Tap the Home icon (
) to finish adjusting the setup. Figure 60 Setup Screen (2) Figure 61 Setup Screen (3) Figure 59 Setup Screen (1) 6.10 BATTERY STATUS A fully charged battery A battery about 80% charged. A battery about 60% charged A battery about 40% charged A battery nearly depleted Recharge the battery immediately When the battery is nearly depleted, following dialog box appears asking you to charge the battery. Figure 62 Dialog box - Needs to be recharged To conserve battery power, the probe goes into sleep mode by turning off the screen when not in use for a specified time. You can adjust the time to go into sleep mode in the setup. See the section 7.4 SLEEP MODE SETTINGS. The probe also goes into sleep mode if you press the Power Button(
briefly with power on.
) To preserve battery power, the probe goes into shut down mode in approximately 24 hours after going into sleep mode, if there is no activity. However, if you do not plan to use the probe for more than a week, you should shut the probe down completely to prevent it from discharging completely. It takes approximately 6 hours for the discharged battery to fully charge. Fully charged battery can provide approximately 1,000 normal scans. Contact your local distributor when the fully charged battery does not allow normal scan for 10min. Page 37 6.11 DIALOG BOXES Windows Description CUBEScanTM BioCon-900S Operators Manual Confirm Message: Are you sure you want to delete this saved scan result?
Confirm Message: Are you sure you want to delete all saved measurements?
Confirm Message: shutdown mode To prevent the probe from discharging. Are you sure you want to go into shutdown mode?
Alert Message: The message prompts you when calibration is needs. Alert Message: The battery is nearly depleted and needs to be recharged. Alert Message: The battery needs to be recharged immediately, so the probe goes to sleep mode soon by shutting itself down Alert Message: The temperature of oil inside the probe is below 10C. So the thermostat inside probe makes the oil warm and the temperature of oil rises above 10C. See the section 8.2 DIALOG BOXES FOR MAINTENANCE for more information Page 38 CUBEScanTM BioCon-900S Operators Manual 7 SETTINGS 7.1 DATE FORMAT SETTINGS 1) Tap the Setup icon (
) on the Home screen. Tap the Home icon (
) to return to the Home screen, if you want. 2) Locate the Date Format option(
), and then tap the Date Format Items (
/
/
) repeatedly to adjust the desired date format. 3) A format of date values immediately updates depending on the date format. Figure 63 Date Format (YY-MM-DD, MM-DD-YY, DD-MM-YY) 7.2 DATE SETTINGS 1) Tap the Setup icon (
) on the Home screen. Tap the Home icon (
) to return to the Home screen, if you want. 2) Locate Date option(
) and tap Date Value Item (eg.
), use the virtual keyboard to enter a date. 3) Tap the OK icon (
) to finish adjusting the date after entering. Figure 65 Enter Date Values (YY-MM-DD, MM-DD-YY, DD-MM-YY) Figure 64 Date Setup 7.3 TIME SETTINGS Page 39 A 24-hour clock provided only. 1) Tap the Setup icon (
) on the Home screen. Tap the Home icon (
) to return to the Home CUBEScanTM BioCon-900S Operators Manual screen, if you want. 2) Locate the Time option(
keyboard to enter a time.
) and tap Time Item (eg.
) to adjust the time, use the virtual 3) Tap the OK icon (
) to finish adjusting the time. Figure 66 Time Setup Figure 67 Enter Time Values (hour:minute) 7.4 A time setting to go into sleep mode: 2min, 3min, 5min SLEEP MODE SETTINGS 1) Tap the Setup icon (
) on the Home screen.Tap the Home icon (
) to return to the Home screen, if you want. 2) Locate the Sleep Mode option(
) and tap Sleep Mode Item ( 2min / 3min / 5min ) repeatedly to adjust the time to go to sleep mode. Figure 68 Time Setting of Sleep Mode (2min, 3min, 5min) 7.5 DISPLAY BRIGHTNESS SETTINGS Page 40 CUBEScanTM BioCon-900S Operators Manual 1) Tap the Setup icon (
) on the Home screen. Tap the Home icon (
) to return to the Home screen, if you want. 2) Use the Next icon (
3) Tap the Brightness Item (eg.50%, 60%, 70%) repeatedly to adjust display brightness (0%-100%).
) on the Setup screen, and look for Brightness option(
). NOTE: The display brightness setting affects battery life. To conserve battery life, adjust brightness to a lower setting Figure 69 Brightness Setup 7.6 PRE-SCAN SETTINGS 1) Tap the Setup icon (
) on the Home screen to open the Setup screen. Tap the Home icon (
) to return to the Home screen, if you want. 2) Use the Next icon (
) on the Setup screen, and look for Pre-scan option(
). 3) Turn the Pre-scan on (
) or off (
) by tapping the Light Item (
or
) Figure 70 Pre-scan On/Off Setting 7.7 DELETE ALL MEASUREMENTS Page 41 CUBEScanTM BioCon-900S Operators Manual 1) Tap the Setup icon (
) on the Home screen to open the Setup screen. Tap the Home icon (
) to return to the Home screen, if you want. 2) Use the Next icon (
) on the Setup screen, and look for the Delete option(
). 3) Tap the Ok Item(
) to delete all saved results. 4) And a dialog box (
) to confirm appears before deletion. 5) Tap the Ok icon (
) to delete or tap the Cancel icon (
) to cancel. 6) Tap the Home icon (
7) See the Home screen whether all saved results were deleted.
) to returen to the Home screen. Figure 71 Delete All Data Page 42 CUBEScanTM BioCon-900S Operators Manual 8 MAINTENANCE 8.1 TROUBLESHOOTING Error message Description Actions FPGA Configuration Error System Information Error Contact your local distributor or Mcube Technology. Contact your local distributor or Mcube Technology. Angle Motor Error Contact your local distributor or Mcube Technology. Plane Motor Error Contact your local distributor or Mcube Technology.. High Temperature Error Contact your local distributor or Mcube Technology. Low Temperature Error Contact your local distributor or Mcube Technology. Data Deletion Error Contact your local distributor or Mcube Technology. 8.2 DIALOG BOXES FOR MAINTENANCE popup Description Indicates that the temperature of oil inside the probe is below 10C. So the thermostat inside probe makes the oil warm and the temperature of oil rises above 10C. The following dialog boxes appear during the progress of warming oil. Warming oil lasts (about 3min or less) until the temperature of oil reaches 10C. When finished, it goes to the Home screen.
(During warming oil) (when finished) Page 43 CUBEScanTM BioCon-900S Operators Manual 8.3 CLEANING & DISINFECTION WARNING Cleaning is a necessary step to perform before disinfecting the device. If the device is not cleaned properly, even after the disinfection procedure is completed, there may be contamination of the device. Incorrect cleaning or disinfecting of any part of the system can cause permanent damage. Do not use solvents such as thinner or benzene, or abrasive cleaner on any part of the system. Do not subject the system to any method of sterilization. Do not immerse the probe except the probe head in cleaning or disinfectant solution. Do not immerse the Charger in cleaning or disinfectant solution. Do not use metal or abrasive brushes. These may scratch the instrument causing permanent device damage. Wear protective gloves when cleaning the device. Availability of cleaning and disinfection products varies by country, and Mcube Technology is not able to test the products in every market. Please contact your local service provider or Mcube technology if you need more information. Do not spray the disinfectant spray solution directly on the surface, recessed areas, crack, etc. of the probe and the Charger. CAUTION This product may only be cleaned and disinfected by using the approved processes provided in this manual. Cleaning and disinfection methods listed are recommended by Mcube Technology based on compatibility with component materials. Ensure that you follow the manufacturers instructions for handling and disposing of the cleaning and disinfection solutions provided in this manual. BioCon-900S probe is intended to contact the abdominal skin to measure the bladder volume. For this reason, cleaning and disinfecting the probe and Charger is an important procedure in using the system. The following table shows the risk assessment for the probe including the Spaulings/CDC classification for the minimum required disinfection level. Component Packaged Use Spauldings/CDC classification Clean Disinfection level Low High Probe Head Nonsterile Reusable Noncritical Probe Except head Nonsterile Reusable Noncritical Charger Nonsterile Reusable Noncritical 8.3.1 Compatibility The following solutions have demonstrated cleaning or disinfection efficiency and material compatibility with system components:
Metrex CaviWipes Metrex CaviCide Spray 8.3.2 Cleaning Ensure the power cord is not plugged into wall outlet. Using a dry paper towel or soft cloth, wipe any ultrasound gel, soils and dirt completely off the Charger or Page 44 CUBEScanTM BioCon-900S Operators Manual and probe. 1) Cleaning outer case (housing) of the Charger. a) Put on new gloves. b) Spray a soft-bristled brush(M16 recommended and validated) with Metrex CaviCide spray until thoroughly wet. Using the brush, scrub mated surfaces, recessed areas, cracks, crevices and other hard to reach areas until no visible contaminant is left on the Charger. c) Use a CaviWipe towelette to completely clean the surface on the Charger. d) Use a second CaviWipe towelette to thoroughly wet all surfaces of the Charger until all visible e) contaminants are removed. Allow the Charger to remain wet for 2 minutes. If using an additional Metrex CaviCide towelette, leave the solution on the wiped Charger surface for about 2 minutes. f) Visually inspect the Charger for visible contaminants. g) Allow the Charger to air dry. Figure 72 Charger Please ensure that the electric inlet of Charger is not exposed to any solution during the cleaning procedure. If the inlet is exposed to the solution (such as water, isopropyl alchol or ethyl), dry the Charger completely before use. 2) Cleaning the probe Since the surface of the probe affects the result of data, users should keep as follows:
a) Put on new gloves. b) Spray a soft-bristled brush(M16 recommended and validated) with Metrex CaviCide spray until thoroughly wet. Using the brush, scrub mated surfaces, recessed areas, cracks, crevices and other hard to reach areas until no visible contaminant is left on the probe. c) Use a CaviWipe towelette to completely clean the surface of the probe. d) Use a second CaviWipe towelette to thoroughly wet all surfaces of the probe. Allow the probe to e) remain wet for 2 minutes. If using an additional Metrex CaviWipe towelette, leave the solution on the wiped probe surface for about 2 minutes. f) Visually inspect the probe for visible contaminants. g) Allow the probe to air dry. Figure 73 Probe Front-View Figure 74 Probe Back-View Page 45 CUBEScanTM BioCon-900S Operators Manual 8.3.3 Disinfection Please note the that low-level disinfection of the probe head is required before a new measurement. a) Put on new gloves b) Spray the probe head until it is sufficiently wet with a Metrex CaviCide spray. Figure 75 Probe Head c) Leave the solution on the probe head surface for about 3 minutes. d) If you spray the Metrex CaviCide spray additionally, leave the solution on the surface for at least 3 minutes. e) Allow the probe head to air dry. f) Wipe the probe head thoroughly using the fresh CaviWipes. g) Keep the probe head wet for 3 minutes. h) Additional wipes may be used to ensure the probe remaining wet for the 3 minutes, if necessary. i) Allow the probe head to air dry. j) Using sterile, lint-free cloths wetted with RO/DI water thoroughly wipe the probe for at least a minute k) Allow the probe head to air dry. BATTERY MAINTENANCE 8.4 BioCon-900S battery cannot be removed by the user. If you do not plan to use BioCon-900S for a long period of time, you should switch the probe to shutdown mode to prevent its battery from fully discharging. The BioCon-900S should be charged every 6 months at a minimum, store it in accordance with the recommended conditions. See the section 9.5 ENVIRONMENTAL CONDITIONS. DISPOSAL WEEKLY INSPECTION 8.5 a) Inspect the probe and Charger thoroughly for cracks or leakages. b) Inspect the power cord for checking if there are any damaged parts. c) When scanning, check out any abnormal noise emanating from the probe head. 8.6 The device and components may contain environmentally hazardous materials (mineral oil, lead, battery pack, etc.). When they have reached the end of its useful service life, return them to the Mcube Technology, or follow your local regulations for hazardous waste disposal. 8.7 Faults not described in section 8.1 TROUBLESHOOTING are intended to be serviced by a certified technician. When any troubles unlisted in section 8.1 TROUBLESHOOTING occur, contact an authorized service provider or Mcube Technology. DEVICE REPAIR Page 46 CUBEScanTM BioCon-900S Operators Manual 8.8 SELF TEST 1) Put the probe on the Charger Self-test 2) Turn the probe on and tap the Setup icon (
) on the bottom right side of the Home screen. 3) Tap the Next icon (
) on the Setup screen and select the Self-test icon (
) 4) Tap the Scan icon (
) to start the calibration. You can cease the Self-test by tapping the Cease icon (
). Tap the Exit icon (
) to return to Setup screen, if you want. 5) Self-test progress bar appears, when the calibration is started. The progress bar indicates the progress of calibration. It takes about 3minutes to complete the calibration. When the calibration is completed, 100% sign is displayed. Tap the Ok icon (
the Setup screen.
) and the latest calibration date is updated. Tap the Exit icon (
) to return to Page 47 CUBEScanTM BioCon-900S Operators Manual CALIBRATION 8.9 BioCon-900S must be calibrated every 12 months to ensure accurate results. Calibration ensures accurate alignment of BioCon-900Ss internal system. You can take scan, even if calibration is not performed by the designated date. But result can be compromised. There are following methods for the calibration. CAUTION Calibrate BioCon-900S when the battery is charged over 60%. 8.9.1 PHANTOM CALIBRATION Phantom Calibration 1) Place the CubeScan phantom on a flat 2) Pour about 5ml of water or more on the center surface and open the cover of the phantom. surface of the phantom 3) Place the phantom cover on the top of the CubeScan phantom. Check if the cover is in a stable and flat position. 4) Put the probe head into the probe holder firmly. 5) Turn the probe on and Tap the Setup icon (
on the bottom right side of the Home screen.
) 6) Tap the Next icon (
) on the Setup screen and select Phantom Calibration icon (
) 7) Tap the Scan icon (
) to start the calibration. You can cease the phantom calibration by tapping the Cease icon (
). Tap the Exit icon
(
) to return to Setup screen, if you want. 8) The calibration progress bar appears, when the calibration is started. The progress bar indicates the progress of calibration. takes about 3minutes to complete the calibration. When the calibration is completed, 100% sign is displayed on the screen. It 9) Tap the Ok icon (
) and the latest calibration date is updated. Tap the Exit icon (
to the Setup screen.
) to return Page 48 8.9.2 CALKIT CALIBRATION Calkit Calibration CUBEScanTM BioCon-900S Operators Manual 1) Open the cover of the calibration kit and pour the saline solution. Ideal calibration condition You can pure water instead of the saline solution. Ensure that water does not contain any air bubbles before starting the calibration. 2) There is a mark on the inside of the Calkit showing the Water Level. The Water Level is about 1cm below the top edge. Pour water to the Water Level. 3) Close the cover of the calibration Kit. Make sure that the arrow of the Calkit cover is aligned with the nipple of the Calkit body. 4) Align the probes Scan Button with the arrow of the cover and put the probe head firmly into the cover. 5) Turn the probe on and tap the Setup icon (
) on the botton right side of the Home screen. 6) Tap the Next icon (
) on the Setup screen and select the CalKit Calibration icon (
) 7) Tap the Scan icon (
) to start the calibration. You can cease the calkit calibration by tapping
). Tap the Exit icon (
the Cease icon (
return to the Setup screen, if you want.
) to 8) The calibration progress bar appears, when the calibration is started. The progress bar indicates the progress of calibration. takes about 3minutes to complete the calibration. When the calibration is completed, 100% sign wil be displayed on the screen. It Tap the Ok icon (
) and the latest calibration date is updated. Tap the Exit icon (
to the Setup screen.
) to return 8.9.3 CALIBRATION REMINDER 1) Calibration Reminder Dialog box Calibration Reminder Dialog box appears on the top screen under the conditions as follows:
-
After 1 year since the last calibration Tap the Ok icon (
) to return to the Home screen. The Calibration Reminder Dialog box disappears. 2) Calibration Reminder icon The Calibration Reminder icon (
) is displayed on the Home screen after the Calibration Reminder Page 49 CUBEScanTM BioCon-900S Operators Manual Dialog box disappears. When you finish the calibration, the last calibration date is updated and the Calibration Reminder icon (
) disappears. Figure 76 Calibration Reminder Icon on Home Screen Page 50 CUBEScanTM BioCon-900S Operators Manual 9 SPECIFICATIONS 9.1 ACOUSTIC OUTPUT TABLE WARNING ALARA principle (As Low As Reasonably Achievable) should be employed for all medical ultrasound exposure. Users can not adjust the acoustic output energy of the BioCon-900S. The output level is below than the levels which were referred in AIUM remarks in 1992 and there were no reported biological effects under the level. However, to minimize exposure, measurements should be kept as short as possible. Refer to the acoustic output section for more information. Transducer Model: BioCon-900S Transducer Operating Mode: B-mode The values in this table are the maximum readings obtained from each frequency. Index Label Global Maximum Index Value Pr,a P Min of [P(zs), Ita,(zs)]]
Assoc Acoustic zs zbp Parameter zb z at max. Ipi deq(zb) fawf Dim of Aaprt td prr pr at max. Ipi Other deq at max. Ipi Information Focal Length MI scan 0.34 0.62
(MPa) 0.48
(mW)
(mW)
(cm)
(cm)
(cm)
(cm) 2.7
(cm)
(MHz) X (cm) Y (cm) 2.04 2.04 1.1 1.1
(microsec) 1.22
(Hz) 390
(MPa) 0.61
(cm) FLx (cm) FLy (cm) Operating Control Conditions Ipa.3 at MImax
(W/cm2) 7.8 TIS non-scan TIB non-
Aaprt<=1 Aaprt >1 scan 0.99 5.5 5.5 TIC 9.2 9.2.1 ELECTROMAGNETIC COMPATIBILITY Electromagnetic emissions Guidance Manufacturers declaration - electromagnetic emissions The BioCon-900S is intended for use in the electromagnetic environment specified below. The customer or the user of the BioCon-900S should assure that it is used in such an environment. Phenomenon Test level /
requirement Electromagnetic environment - guidance RF Emissions CISPR 11 Group 1 The BioCon-900S uses RF energy only for its Page 51 CUBEScanTM BioCon-900S Operators Manual internal function. Therefore, its RF emissions are very to cause any interference in nearby electronic equipment low and are not likely The BioCon-900S is suitable for use in all establishments, other than domestic and those directly connected low-voltage power supply network that supplies buildings used for domestic purposes the public to RF Emissions CISPR 11 Harmonic Current Emissions IEC 61000-3-2 Voltage fluctuations/Flicker emission IEC 61000-3-3 Class A Class A Complies 9.2.2 Electromagnetic Immunity Guidance Manufacturers declaration - electromagnetic immunity The BioCon-900S is intended for use in the electromagnetic environment specified below. The customer or the user of the BioCon-900S should assure that it is used in such an environment. Immunity test IEC 60601-1-2 Test level Compliance Electromagnetic environment -
Guidance 8kV Contact 2, 4, 8, 15kV Air 2 kV 100 kHz repetition frequency Line to Line 0.5 kV, 1 kV Line to Ground 0.5 kV, 1 kV, 2 kV 0 % UT: 0.5 cycle At 0, 45, 90, 135, 180, 225, 270 and 315 0 % UT; 1 cycle and 70 % UT; 25/30 cycles Single phase: at 0 0 % UT for 250/300 cycle 30 A/m 50 Hz & 60 Hz Electrostatic discharge (ESD) IEC 61000-4-2 fast Electrical transient/burst IEC 61000-4-4 Surge IEC 61000-4-5 Voltage dips IEC 61000-4-11 Voltage interruptions IEC 61000-4-11 Power frequency magnetic field Immunity IEC 61000-4-8 9.2.3 RF Immunity In compliance Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30%. In compliance Mains power quality should be that of a typical commercial or hospital environment. In compliance Mains power quality should be that of a typical commercial or hospital environment. If the user of In compliance In compliance Mains power quality should be that of a typical commercial or hospital environment. the requires continued BioCon-900S operation during power mains interruptions, it is recommended that the BioCon-900S ultrasound system be powered from an uninterruptible power supply or a battery. In compliance In compliance Power frequency magnetic fields should be at levels characteristic of a typical commercial or hospital environment. location typical in a Immunity test IEC 60601 test Compliance Electromagnetic environment level Page 52 Conducted RF IEC 61000-4-6 Radiated RF IEC 61000-4-3 3 V 0.15-80 MHz 6 V in ISM bands between 0.15 MHz and 80 MHz 80% AM at 1 kHz 3 V/m 80MHz-2.7GHz 80% AM at 1 lHz CUBEScanTM BioCon-900S Operators Manual Portable and mobile RF communications equipment should be used no closer to any part of the BioCon-900S, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance d =1.2 3 V 0.15-80 MHz 6 V in ISM bands between 0.15 MHz and 80 MHz 80% AM at 1 kHz 3 V/m 80MHz-2.7GHz 80% AM at 1 lHz and d = 1.2 80 MHz to 800 MHz d =2.3 800 MHz to 2.7 GHz where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer the recommended separation distance in meters (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, a should be less than the compliance level in each frequency range. b Interference may occur equipment marked with the following symbol :
the vicinity of in is d NOTE 1) At 80MHz and 800MHz, the higher frequency range applies. NOTE 2) These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. a. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the BioCon-900S is used exceeds the applicable RF compliance level above, the BioCon-900S should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the BioCon-900S. Over the frequency range 0.5MHz to 80MHz, field strengths should be less than 3 V/m. b. 9.2.4 Recommended separation distance Recommended Separation Distances between Portable and Mobile RF communications equipment and the BioCon-900S The BioCon-900S is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of BioCon-900S is can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and BioCon-900S as recommended below, according to the maximum output power of the communications equipment. RATED MAXIMUM OUTPUT POWER OF SEPARATION DISTANCE ACCORDING TO FREQUENCY OF TRANSMITTER (m) 150 kHz to 80 MH 80 MHz to 800 MHz 800 MHz to 2.5 GHz Page 53 TRANSMITTER d = 1.2 d = 1.2 d = 2.3 CUBEScanTM BioCon-900S Operators Manual
(W) 0.01 0.1 1 10 100 0.12 0.38 1.2 3.8 12 0.12 0.38 1.2 3.8 12 0.23 0.73 2.3 7.3 23 For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. NOTE: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. 9.2.5 Components conformance to standards To maintain electromagnetic interference (EMI) within certified limits, the device must be used with the cables, components specified or supplied by Mcube Technology. The use of cables or compoments other than those specified or supplied may result in increased emissions or decreased immunity of the system. EMC standards Compoment Power Cord Adapter Max length 1.83 m(6ft) 1 m (3.3ft) 9.3 EXCESSIVE TEMPERATURE TEST RESULT Transducer type Test to be applied Simulated use test Temperature rise Still air test
(no gel) Temperature rise External use The ambient temperature : 22.8 The temperature rise to: 24.6 The ambient temperature : 23.1 The temperature rise to: 25.5 SPECIFICATIONS OF COMPONENTS 9.4 9.4.1 WIRELESS CHARGING Main Chipset TI (BQ500210RGZ) Coil type 1 Coil (A10) Page 54 CUBEScanTM BioCon-900S Operators Manual Power Input Power Output 1A / 60-80VA
<5W (5V, 1A) Charging efficiency 70%(Power max.) Temperature sensor NTCG163JF103FT1 LED Battery indicator 2LED (Yellow:1 / Green:1) Operating frequency
(wireless charging function) 149-156 kHz NOTE: 1. The output power of a wireless charging is lower than 5 W. 2. The distance for wireless charging between Charger and a probe is less than 10mm. 3. The probe has to be properly mounted on the Charger for wireless charging. See the section 4.2 CHARGE THE BATTERY, if the battery is not charging. 9.4.2 SPECIFICATION OF COMPONENTS Item Features Bladder Volume Range 0 - 999ml Probe Accuracy 0-99ml10ml, 100-999ml10%
(According the scanning Technology tissue-equivalent bladder phantom.) to instruction, and scanning on a Mcube Scan time Less than 3 sec Power MC-BA-01 (Lithium-ion rechargeable battery)
- Nominal Voltage: 3.6v
- Nominal capacity:5200mAh Charging time: less than 6 hours
- Charged by the Charger Number of scanning : approximately 1000 scans.
- For a new battery module fully charged.
- Tested under Mcube Technologys test conditions. Expected Service Life 7 years Display Patient ID Input User Interface TFT-LCD 2.7 inch Format : 240 X RGB X 320 Stripe Virtual Keyboard 1D/2D Barcode (Optional)
- LCD Icons
- 2 buttons
- Touch screen Water Resistance Rated at IPX3 Probe Head
-Transducer : Diameter: 14mm
-Sector scan
-Dual frequency (2MHz, 3.4MHz)
-B-mode scan image
-Scan angle : 120
-Penetration depth(normal patient): 23cm
-Applied part: Probe Cap
-Type BF Mode of Operation
- Continuous operation Weight 540g with battery Page 55 CUBEScanTM BioCon-900S Operators Manual Charger Item Use Power Output Insulation Features Indoor AC/DC Adapter:
Manufacturer: MEAN WELL Model: GSM60A12 Input: 100- 240VAC, 50/60Hz, 1.4-0.7A Output: 12V 5.0 A, 60W MAX Wireless Power Transfer Charger Class I with protective earth Water Resistance IPX0 Mode of Operation Continuous operation. Weight 480g (without adapter and AC cord) 9.5 ENVIRONMENTAL CONDITIONS WARNING Do not leave this device in places subject to extremely high temperatures such as a sealed vehicle CAUTION or in direct sunlight. This can cause a fire. Do not place the heavy object on the device. The device can be damaged. Do not place the device on an unstable surface. This can cause the device to fall or tip over and Keep away from the humid or dusty place. cause injury. CAUTION Do not place the heavy object on the device. The davice can be damaged. Keep away from the humid or dusty place. Use the device indoors only under the environmental conditions. For additional protection of the device during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. The immediate use of the probe which has been stored under 10 without warming may damage the probe. So take it into a room where the temperature is over 10 and let BioCon-900S warm up for a while. And then when the temperature of probe is over 10 you may use it. If you are not using BioCon-900S more than 3 months, remove the battery to prevent it from discharging and store it in accordance with the recommended conditions, and charge the battery every 6 months. Contact your local distributor or Mcube Technology, when you need to remove or replace the battery. Enviromental Specifications Operating conditions Use Indoor Ambient temperature range
+10 - +40 (+50 - +104) Relative humidity
+30% - +75% non-condensing Atmospheric pressure range
+700hPa - +1060hPa Storage and transport conditions Use Indoor Ambient temperature range
-20 - +60 (+14 - +140) Page 56 CUBEScanTM BioCon-900S Operators Manual Relative humidity
+20% - +80% non-condensing Atmospheric pressure range
+600hPa - +1060hPa European Union Declaration of Conformity 9.6 This device complies with the essential requirements of the Radio Equipment directive: 2014 / 53 / EU. The following test methods have been applied to prove presumption of conformity with the essential requirements of the Radio Equipment directive: 2014/53/EU:
Manufacturer Products Mcube Technology Co.,Ltd. CUBEScan Charger / Charger-001 Bladder Volume Measurement System / BioCon-900S Product Description WPT System EU Directives 2014/53/EU Radio Equipment Directive (RED) Reference standards used for presumption of conformity:
Article Number Requirement External use 3.1a 3.1b 3.2 Medical electrical equipment RF Exposure IEC 60601-1 : 2005 + CORR. 1
(2006) + corr. 2 (2007) EN 60601-1 : 2006 + A1 : 2013 EN 62311:2008 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services EN 301 489-1 V2.1.1 EN 301 489-3 V2.1.1 Wireless power transmission systems, using technologies other than radio frequency beam, in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges EN 303 417 V1.1.1 Page 57 CUBEScanTM BioCon-900S Operators Manual 10 GLOSSARY Probe Charger Transducer B-mode Pre-scan Normal Scan The main device with the LCD display. CUBEScan Charger; Charge a lithium-ion battery with a probe. Device that transforms one form of energy into another form of energy. Ultrasound transducer transforms electric energy into acoustic energy and vice versa. Transducer in this guide means ultrasound transducer. A kind of ultrasound imaging mode. Displays the brightness information corresponding to the amplitude of the signal. General 2D real-time ultrasound scanning. 2D ultrasound images are displayed continuously in live image basis. This helps an operator locate bladder position and predicting the range of residual urine. Gets 12-plane ultrasound images and calculates the residual urine in the bladder (3D scanning). Self-Test Displays Self-test progress and results. Phantom-Calibration Displays phantom-calibration progress and results. Page 58 CUBEScanTM BioCon-900S Operators Manual 11 SYMBOL DIRECTORY Symbol Description Symbol Description Warning Caution NOTE Failure to observe the warning could result in personal injury or serious damage the system to to observe Failure recommendations precautions may system damage or failure result the and in Provide information to help you use device more efficiently your Operation instructions - Please refer to the operators manual. Serial number Catalog(Part) number Type BF applied part
(B= Body, F= Floating applied part) Degree of protection against harmful ingress of water as detailed in the IEC 60529:IPX3
- Protected against spraying water Manufactured date Manufacturer REP EC Authorized representative in the European community and to waste electronic WEEE Subject electrical equipment regulations Refer to local regulations for disposal. Stand-by Explanatory Sign CLASS 1 LASER PRODUCT EU's Restriction of Hazardous Substances CE marked in accordance with the Medical Device Directive to Tested Federal Communications Commission requirements Statement of prescription Underwriters UL Laboratories certification mark for electrical shock, fire, and mechanical hazards only MEDLINE Logo Fragile item, Handle carefully Temperature limitation This Way Up Humiditylimitation Page 59 CUBEScanTM BioCon-900S Operators Manual Atmospheric limitation pressure Do not use blades to open Use no hook Keep dry Page 60 CUBEScanTM BioCon-900S Operators Manual 12 REFERENCES AIUM: Medical Ultrasound Safety, American Institute of Ultrasound in Medicine, Laurel, MD, 1994. AIUM: Acoustic Output Labeling Standard for Diagnostic Ultrasound Equipment: A Standard for How Manufactures Should Specify Acoustic Output Data, Revision 1, American Institute of Ultrasound in Medicine, Laurel, MD, 2008. AIUM/NEMA: Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3. NEMA Standards Publication UD 2-2004; American Institute of Ultrasound in Medicine, Laurel, MD;
National Electrical Association, Rosslyn, VA; 2004b. Health Canada: Guidelines for the safe use of diagnostic ultrasound, Cat. H46-2/01-255E, Ministry of Public Works and Government Services Canada, 2001. Health Canada: Medical Devices Regulations SOR/98-282 MDD 93/42/EEC, Medical Device, Office for the Official Publications of the European Communities, 2003. IEC 60601-1, Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance, International Electrotechnical Commission, 2012. UL 60601-1, Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance, Underwriter Laboratories Inc, 2012. CSA C22.2 No. 601.1B-90, Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance, Canadian Standards Association, 2012. IEC 60601-2-37, Medical electrical equipment Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment, International Electrotechnical Commission, 2007. ISO 10993-1, Biological Evaluation of Medical Devices Part 1: Evaluation and Testing with in a risk management process, 2009. FDA Guidance: Information for Manufacturers Seeking Marketing Clearance of Diagnostic Ultrasound Systems and Transducers, 2008 FDA Guidance: General Principles of Software Validation; Final Guidance for Industry and FDA Staff, 2002. Woo Sung Hong, Sun Young Ham, Tong-Wook Kim, Jeong-Seok Seo, Sang-Kuk Yang. Usefulness of a Sonographic Bladder Scan for Uroflowmetry and the Evaluation of the Anxiety Level Associated with Uroflowmetry. The Korean Journal of Urology 2007:48(06):633-637 Chung B, Lee T, Yang J H. The Diagnostic Value of Portable Bladder Volume Measurement (BVMS) with Real Bladder Image in the Measurement of Bladder Volume According to the Different Angling of Transducer. The Korean Journal of Urology 2006:47(06):1320-1326 Bodker B, Lose G. Postoperative urinary retention in gynecologic patients. Int Urogenecol J Pelvic Floor Dsyfunct 2003;14:94-97 McNaughton-Collins M, Barry MJ. Managing patients with lower urinary tract symptoms suggestive of benign prostatic hyperplasia. Am J Med 2005;118:1331-9 Page 61 CUBEScanTM BioCon-900S Operators Manual Manufacturer Mcube Technology Co., Ltd.
#803, 123, Bonghwasan-ro, Jungnang-gu, Seoul, Korea Tel.: +82-2-3421-7780 Fax.: +82-2-3421-7076 E-mail: mcube@mcubetech.co.kr Web site: www.mcubetech.co.kr Revision Date : AUG.21.2018 MUM-BioCon-900S EN(Rev.1.0) U.S. Distributor Medline Industries, Inc. One Medline Place Mundelein, Illinois, 60060 USA Tel: 1-800-MEDLINE Website: www.medline.com DongBang Acuprime 1 Forrest Units, Hennock Road East, Marsh Barton, Exeter EX2 8RU, U.K Tel: +44 1392 829500 Fax: +44 1392 823232 Local Distributor
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-10-25 | 0.149 ~ 0.156 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-10-25
|
||||
1 | Applicant's complete, legal business name |
Mcube Technology Co.,Ltd
|
||||
1 | FCC Registration Number (FRN) |
0025009408
|
||||
1 | Physical Address |
#803, 123, Bonghwasan-ro, Jungnang-gu
|
||||
1 |
Seoul, N/A 02048
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AGCZ
|
||||
1 | Equipment Product Code |
BIOCON900S
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** K******
|
||||
1 | Title |
QA
|
||||
1 | Telephone Number |
+82-(********
|
||||
1 | Fax Number |
+82-(********
|
||||
1 |
m******@mcubetech.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CUBEScan Charger | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
KCTL INC
|
||||
1 | Name |
J****** B******
|
||||
1 | Telephone Number |
82-70********
|
||||
1 | Fax Number |
82-50********
|
||||
1 |
j******@kctl.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.14900000 | 0.15600000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC