FCC ID: 2APJ4-SLT719 CPE with WiFi, WCDMA and LTE

4G LTE CPE Quick Start Model Name: SLT719 Legal Information Copyright @2021. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of and its affiliates. Reserves the right to change or modify any information or specification contained in this manual without prior notice and without any liability. Limitation of Liability Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. 1. Introduction of Router Your router is for indoor use only and multiple devices like computer, smart phone or landline phone can be connected to the router to access the Internet, make telephone calls and more. Application Scenarios:

Scenario 1: mobile network service using a SIM card. Scenario 2: Data service from Ethernet Internet connection

(RJ45 Port). Scenario 3: Data service from Ethernet and VoLTE voice using a SIM card. Appearance 1 LAN port 2 WAN port 8 9 External antenna ports SYS indicator 3 Telephone port 10 ETH indicator 4 Micro-USB port 11 WiFi/WPS indicator 5 WPS/Reset button 12 4G indicator 6 7 Power Input SIM card slot 13 NET indicator WPS/Reset button: Press once for WPS, press and hold for about 3 seconds for Reset. Important: Router does not support any non-standard SIM cards. 2. Setup your Router Insert a SIM card first and then connect power adapter to the power input of the router. The router will power on and search for available mobile networks automatically. Do not insert or remove SIM card when the router is running, as this may affect performance or damage the SIM card. The intuitive indicators display the routers status Indicator Status On: Device is powered on Off: Device is powered off On: LAN or WAN port is connected Off: LAN or WAN port is disconnected Blinking: Ethernet data transfer in process On: WiFi is on Off: WiFi is off Blinking: WPS connection in process On: Connected to the 4G network Off: Connected to the non-4G network. On: Register to network Off: Not register to network Blinking: Mobile data transfer in process WiFi/WPS SYS ETH 4G NET 3. Configuring You can configure the router via the WebUI Settings page. 1) Launch the Internet Explorer browser, and enter http://192.168.10.1 in the address bar. 2) Enter the username and password to log in the WebUI. The default username is ClaroAdministrador. You can refer to the label of the router for the default password. Its strongly suggested to change the default login password of the WebUI to prevent unauthorized users from changing the routers settings. 4. Connect to Wi-Fi Network You can connect your computer or mobile phone to the routers Wi-Fi network. SSID and the password. Please refer to the label of the router for the default Wi-Fi Its strongly suggested to change the default SSID and password by accessing to the WebUI Wi-Fi management page to prevent unauthorized access to your Wi-Fi network. You need to reconnect to the routers Wi-Fi network after changing the Wi-Fi password. 5. Access the internet via the WAN port You can connect the routers WAN port to the wall-mounted Ethernet port by Ethernet cable, and configure PPPoE/Static/DHCP parameters to access to internet. the 6. VoLTE, VoIP & CS Domain Voice Call The router supports VoLTE, VoIP and CS domain voice call services. You can change the call mode via WebUI. Please contact your service provider for more information. 7. FAQs & Troubleshooting If you are expecting any issues with the router, in most cases please try to restart the router or restore the router to the factory settings. The illustrations in this guide are for reference purpose only and may not reflect the exact appearance of your product. Please contact your service provider for more information. Questions Solutions How to factory settings?

restore How to connect the router by the Wi-Fi Protected Setup

(WPS) ?

How to deal with the content display issue of the WebUI?

When the router is powered on, press and hold the reset button for about 3 seconds until the indicator starts to blink. Restoring factory settings will clear all user settings. 1. Ensure that Wi-Fi is enabled on the client. 2. Press the WPS button on the router to set up a WPS connection Manually clear browsers cache, for example, open Internet Explorer browser and choose Internet Options >General >

Browsing history >Delete, and re-launch the WebUI page. 1. Ensure that you have a working SIM card inserted properly. Why the router does not work after I have finished configuring?

2. Move the router to an open space free from obstructions and make sure there are available mobile networks. 3. If the problem persists, please contact your service provider. 1. Ensure that your computer is connected to router through Wi-Fi or Ethernet cable. 2. Ensure that your computer is set to obtain an IP address and DNS server address automatically. 3. Restart your browser or try using another browser. 4. If the problem persists, restore the router to factory settings and try to access WebUI again. Why cant I access the WebUI of the router?

8. Warning and Notice Safety Precautions This section contains the important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Some electronic devices may to electromagnetic interference. Locate the router away from any TV set, radio and other electronic equipment to avoid electromagnetic interference. susceptible be The router may interfere with medical devices, such as hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using the router. Please keep yourself at least 20 centimeters away from router. Do not use your router in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed. Please use original accessories or accessories that are authorized by . Unauthorized accessories may affect the router performance, damage the router or cause danger to you. Do not attempt to dismantle the router. There are no user serviceable parts. Do not allow the router or accessories to come into contact with liquid or moisture at any time. Do not immerse the router in any liquid. Do not place objects on top of the router. This may lead to overheating of the device. The device must be placed in ventilation environment for use. Do not expose the router to direct sunlight or store it in hot areas. High temperature can shorten the life of electronic devices. Do not allow children to play with the router or charger. Keep the length of the cable between the router and the phone less than 10 meters. The router is for indoor use only. Do not use the router outside. Do not connect telephone extensions which run outside of the building. These can result in lightning damage to your unit. Cleaning and Maintaining Use an antistatic cloth to clean the router. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your router before you clean it. Use the router within the temperature range of 0 +45, and the storage temperature range is -20+70. The humidity range is 5%~95%. Do not remove your SIM card unnecessarily. The SIM card may be easily lost or it can be damaged by static electricity. FCC statements:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

receiver. Reorient or relocate the receiving antenna. Increase the separation between the equipment and Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for Federal Communication Commission (FCC) Radiation Exposure When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. help. Statement

Model: SLT719 SSID: CLARO_WIFIXXX Wi-Fi KEY: CLAROIXXX IP Address: 192.168.10.1 Usemame: ClaroAdministrador Password: soporteXXXXXX Input: 12V 521A Made in china MEIGLink CNMI IMEI: 86066205XXXXXXX SONI S/N: XX) XXXXXXXAXXXXXAXXK FCC ID: 2APJ4-SLT719 MeiG Smart Technology Co., Lid ESWC 4 6 9629 6%o9 Oh G69 38eeh oLeolo2o2%oso2o%o eee Sos ososoSeSoh 9%g%GO O 05962 e@re 6202 2

@59

{lose fo) ego 62 S08 6 ogoge 6956 % oll o 69e 020%0%6 269 O%6 2090%0%6 26% O_O 62 6

MeiG Smart Technology Co., Ltd Date: 2022/1/11 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The MeiG Smart Technology Co., Ltd, the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the MeiG Smart Technology Co., Ltd solely in matters relating to the application for an FCC equipment authorization for FCC ID:

2APJ4-SLT719 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the MeiG Smart Technology Co., Ltd in connection with the Application shall have the same effect as acts of the MeiG Smart Technology Co., Ltd. MeiG Smart Technology Co., Ltd also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name:Xinwei Lou Title: HW test Leader Tel: 021-54278676 Email:louxinwei@meigsmart.com Company name: MeiG Smart Technology Co., Ltd

MeiG Smart Technology Co., Ltd Date: 2022/01/10 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2APJ4-SLT719 To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, MeiG Smart Technology Co., Ltd hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give MeiG Smart Technology Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Description Block Diagram Operational Description Schematics BOM External Photos Internal Photos Test-Setup Photos User Manual Exhibit 1 2 3 4 5 6 7 8 PERMANENT SHORT-TERM The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory Contact name: Xinwei Lou Title: HW test Leader Tel: 021-54278676 Email: louxinwei@meigsmart.com MeiG Smart Technology Co., Ltd