FCC ID: 2APJ4-SNM500 Wireless communication module

A Global Leading IoT Terminals And Wireless Data Solutions Provider MeiG-SNM500 Support Wi-Fi & BT SNM500 adopts Qualcomm QCM2150 platform, 4-core A53(4* 1.3GHz) with 28nm FinFET process, 64bit ARM. It supports decode/encode up to 1080P@30fps, H.264, HD+ screen resolution, and dual ISP cameras. SNM500 is equipped with Android 10 operating system and a board memory of 1GB+8GB (2GB+16GB, and 3GB+32GB). SNM500 can provide functions such as voice, SMS, address book, 2.4G/5G WiFi, BT. It supports dual 800W 3D camera or the depth-of-field camera, which can be widely used in intelligent POS cash registers, logistics terminals, VR Camera, intelligent robots, video recorder, security, automotive equipment, intelligent information collection equipment, intelligent handheld terminals, UAV and other products. Main Advantage Support main screen display HD+ (1440x720)@60pfs Support Dual ISP, Dual Camera (8M+8M) 13MP camera Integrate multi-constellation GNSS receivers, fast and accurate positioning in different environments Support 1080P @30fps video en/decoding Qualcomm 4*A53@1.3G Hz Adreno Adreno 308 Android 10 BT 4.2

(BR/DDR+BLE) IEEE 802 11 a/b/g/n/ac H.264, HEVC,VP8 LGA+LCC EMAIL US:

VISIT US: www.meigsmart.com MeiG-SNM500 Support WIFI & BT Audio & Video Support VoLTE Ultra HD voice calls SRVCC/

CSFB voice fallback technology 24-bit/192kHz High fidelity music playback Video codec: 1080P @30fps WiFi video codec: 1080P @30fps Display Interface 4-lane MIPI_DSI HD+(1440 x 720)@60fps Camera Interface Main camera: 4-lane MIPI_CSI Auxiliary camera: 2-lane MIPI_CSI Max rate: 2.1Gbps/lane, support 13M pixels Touch Screen Interface Capacitive touch screen Audio Interface Analog output: speaker, earpieces, earphone Analog input: 3xmicrophone, 1 x noise reduction microphone 002881 MeiG Smart Technology Co., LtdStock Code002881.SZ Other Interface USB: USB 2.0*1, support USB OTG I2C: x5

(U)SIM: x2 (1.8V/2.95V) UART: x3 (support HW flow control, MAX 4Mbps SD card: x1 (SD 3.0, 4-bit SDIO) PWRKEY: 1.8VInternal pull-up SPI: x5 ADC: x2 GPIO*24 Motor drivex1 LED: x1 Antenna: WiFi & BT antenna Outstanding Interface WLAN: 2.4G/5G, 802.11 a/b/g/n/ac BT: BT2.1+EDR/3.0/4.1 LE/4.2 BLE Built-in charge IC and gauge meter Support DSDS Firmware update via USB General Feature OS: Android 10 Storage 8GB eMMC+1GB LPDDR3 default 16GB eMMC+2GB LPDDR3 optional Operating Temperature: -30C ~ +75C Storage Temperature: -40C ~ +85C Size: 40.5mm 40.5mm 2.8mm Package: LCC+LGA Weight: 13.0g Certification CCC

*: means under development Regulatory Compliance Statement FCC Statement:

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matriel est conforme aux limites de dose d'exposition aux rayonnements, CNR-102 nonce dans un autre environnement.cette eqipment devrait tre install et exploit avec distance minimale de 20 entre le radiateur et votre corps. The user manual for local area network devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and

(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.

(i)Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux.

(ii) le gain d'antenne maximal autoris pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 MHz doivent respecter le pire limiter; et

(iii) le gain d'antenne maximal autoris pour les appareils dans la bande 5725-5825 MHz doivent respecter le pire limites spcifies pour le point--point et l'exploitation non point point, le cas chant. Operational use conditions Module has professional users use condition limitations, Host product manufacturer please ensure giving such warning like Product is limited to professional users use in your products instruction. Antenna used Antenna Type: Dipole Antenna Antenna Gain: 1dBi Labelling Instruction for Host Product Integrator Please notice that if the FCC and IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. For FCC, this exterior label should follow Contains FCC ID: 2APJ4-SNM500. In accordance with FCC KDB guidance 784748 Labeling Guidelines. For IC, this exterior label can use wording Contains IC: 23860-SNM500. 15.19 and RSS-Gen Labelling requirements shall be complied on end user device. Labelling rules for special device, please refer to 2.925, 15.19 (a)(5) and relevant KDB publications. For E-label, please refer to 2.935. Installation Notice to Host Product Manufacturer

required for all other operating configurations, including portable configurations with respect to 2.1093 and difference antenna configurations. Antenna Change Notice to Host manufacturer If you desire to increase antenna gain and either change antenna type or use same antenna type certified, a Class II permissive change application is required to be filed by us, or you (host manufacturer) can take responsibility through the change in FCC ID and IC ID (new application) procedure followed by a Class II permissive change application. FCC other Parts, Part 15B Compliance Requirements for Host product manufacturer This modular transmitter is only FCC authorized for the specific rule parts listed on our grant, host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. Host manufacturer in any case shall ensure host product which is installed and operating with the module is in compliant with Part 15B requirements. Please note that For a Class B or Class A digital device or peripheral, the instructions furnished the user manual of the end-user product shall include statement set out in 15.105 Information to the user or such similar statement and place it in a prominent location in the text of host product manual. Original texts as following:

For Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

mA ARRAS RA A AE EN MEIGLink SNM500 SNM500XX-XXXX WIFI+BT SN: XXXXXXXXXXXXXXAXXXKX BT: XX:XX:XX:XX:XX:XX MAC: XX:XX:XX:XX:XX:XX FCC ID: 2APJ4-SNM500 IC: 23860-SNM500

[m] ey Oy CAN ICES-3 (B)NMB-3(B) This device complies with Part 15 of the FCC

= a Rules. Operation is subject to the following two conditions: (1) this device may not cause F harmful interference, and (2) this device must

[=] i 1 accept any interference received, including interference that may cause undesiredoperation MeiG Smart Technology Co., Ltd Made in China

MeiG Smart Technology Co., Ltd Date: 2024-03-21 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC 1D: 2APJ4-SNM500 To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that ail responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with MeiG Smart Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xinwei Lou Title: HW test Leader Signature: rane, Com On behalf of Company: MeiG Smart Technology Co., Ltd Telephone: 021-54278676

MeiG Smart Technology Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: MeiG Smart Technology Co., Ltd 2nd Floor, Office Building, No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District, shenzhen, China Regarding: Confidentiality Request regarding application for FCC ID: 2APJ4-SNM500 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Nil Software Security Info The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Kea wer On Printed Name (on file with the FCC associated with the Grantee Code): Xinwei Lou Title: HW test Leader Company Name: MeiG Smart Technology Co., Ltd

United Consulting Technology Services Co., Ltd. U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: David@uc-ts.com This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: 2023-03-21 Signed by (Printed Name/Title): David Wu / CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: MeiG Smart Technology Co., Ltd Grantee Code: 2APJ4 FRN: 0027430412 FCC ID: 2APJ4-SNM500 Contact Name: Xinwei Lou Address: 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao 'an District, shenzhen, China Telephone No: 021-54278676 Email: louxinwei@meigsmart.com Applicant Signature:

Date: 2024-03-21 Signed by (Printed Name/Title): Xinwei Lou, HW test Leader

MeiG Smart Technology Co., Ltd FCC ID: 2APJ4-SNM500 Gentlemen:

Cover Letter-Modular Approval Date: 2024-03-21 Theres a WIFI/BT module that would like to have your authorization as a modular approval. The specific product as below, WIFI/BT Module with its designed features and specified description, meets special requirements for single modular approval on FCC KDB996369 by cross-reference list below. Company Product Name Model Number FCC ID MeiG Smart Technology Co., Ltd Wireless communication module SNM500 2APJ4-SNM500 ComplyY/N Y The EUT has RF shielding. Please refer to EUT Photos. Y The EUT uses the chip: QCM2150 as an embedded processor to buffer the data. Please refer to Schematics. Y The EUT has its own power supply regulation, The power supply of this module is DC 3.8V. Please refer to Schematics. Y The EUT meets the FCC antenna requirements; The photo of antenna is shown in the external photos. Y It has been performed the testing as a stand-alone and then confirmed the compliance. Please refer to setup photo. Y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions to the OEM on how to label the end product. Requirement of FCC KDB996369 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2APJ4-SNM500 or Contains FCC ID: 2APJ4-SNM500 Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module Y The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are given in the User Manual. Y The EUT complies with RF exposure requirement. MeiG Smart Technology Co., Ltd which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Thank you. Sincerely, Print Name: Xinwei Lou Title: HW test Leader Signature:

On behalf of Company: MeiG Smart Technology Co., Ltd Telephone: 021-54278676

SGS North America Inc. i i 620 Old Peachtree Road Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States Applicant Legai Business Name MeiG Smart Technology Co., Ltd _ Address 2nd Floor, Office Building,No.5 Lingxia Road, Fenghuang,Fuyong Street, Bao an District, shenzhen, China FRN 0027430412 Grantee Code 2APJ4 FCC ID 2APJ4-SNMS500 Authorized Contact Name Xinwei Lou Contact Email : louxinwei@meigsmart.com, Contact Phone 021-54278676 ;

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(t) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c} _ if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Appiicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or [SED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f} neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 53014 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: httos://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-requlations-title-47 Link to KDBs: https://apps fec.gov/oetcf/kdb/index.cfm Link to RSP-100: httos:/Avww.ic.ge.ca/eic/site/smt-gst.nsffeng/sf01130.html Link to the Covered List: Covered List

& fMeiG Smart Technology Co., Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

&S (MeiG Smart Technology Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature: Oa we; Cow Date: 2024-03-21 Print Name: Xinwei Lou Title: HW test Leader NOTE: This declaration cannot be signed by an Agent, it shail be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2024