WL18DBMOD Wifi Module STC User manual Black Transceiver Product Notice v10.0 ver01

Physical Characteristics Approximate dimensions: L= 200mm. W= 95mm. D=190mm Approximate weight: approximately 3.1kg Available connections: Ethernet, USB , serial Environment RoHS compliant DISPOSAL The MEMS EVOLUTION 4 TRANSCEIVER must not be disposed of in landfill. At the end of its life, the MEMS EVOLUTION 4 TRANSCEIVER must be removed from the vehicle and deposited in a container dedicated to the recycling of electronic equipment that contains batteries. If users do not have access to the appropriate recycling facility, your local Michelin MEMS representative is able to provide a container dedicated to the purpose of collecting MEMS equipment. CONTACT DETAILS For more information or assistance, please contact the Michelin MEMS representative for your country. Brasil, Chile & Per USA, Canada & Mxico Australia South Africa Russia China Europe

: +55 (21) 36 21 4646

: +1 864 458 5000

: +61 3 86 71 1003

: +27 115 790 300

: +7 495 258 09 26

: +86 21 22855000

: +33 4 73 32 20 00 Features, specifications are subject to change without notification. Document version 10.1 MFP MICHELIN 2022 All rights reserved. Exclusive property of Manufacture Franaise des Pneumatiques Michelin. Any reproduction or utilization prohibited without the consent of Michelin. PRODUCT NAME MEMS TRANSCEIVER A ALLUMINIUM Part Number CAI 068685 PRODUCT DESCRIPTION The MEMS EVOLUTION 4 TRANSCEIVER receives, via externally mounted antennas, pressure and temperature data transmitted by the MEMS SENSORS. This information is to be forwarded to the MEMS EVOLUTION 4 SERVER, together with any messages that may require corrective action to be taken in order to maximise the service life of the tire. PRODUCT COMPLIANCE Model FCC ID

: RV5-01

: FI5-RV501 Contains FCC ID: FI5-WL18DBMOD Contains IC: 5056A-WL18DBMOD This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body Le Prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est authorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution: Exposure to Radio Frequency Radiation 1. 2. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Attention: exposition au rayonnement radiofrquence 1. 2. Pour se conformer aux exigences de conformit RF canadienne l'exposition, cet appareil et son antenne ne doivent pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Pour portable utilisation, cet appareil a t test et respecte les directives sur l'exposition aux RF lorsqu'il est utilis avec un accessoire sans mtal. L'utilisation d'autres accessoires peut ne pas garantir la conformit aux directives d'exposition aux RF. Product complies with EU requirements Product complies with ACMA requirements Changes or modifications not expressly approved by Michelin may void the user's authority to operate the equipment. PRODUCT INFORMATION For correct operation, the coupling torque of all SMA connectors is 0.34 - 0.57Nm. Failure to tighten to this range can result in loss of performance and/or damage to the connector during use. PRODUCT SPECIFICATION Performance Characteristics Transmission rate to MEMS server: Normally once each minute but can be configured to suit certain needs. Barometer measurement precision: 4kPa Wi-Fi 802.11 a/b/g/n Electrical Performance Supply voltage: From 20 to 30VDC Over voltage: Up to 80VDC continuous Supply current: 100mA battery charged, 500mA battery in charge Batteries:

o o 1 x Li-metal coin cell (BR2032) Ni-metal hydride rechargeable 7.2V, 4200mAh Typical battery charging time: 6 hours Typical rechargeable battery performance: 6 hours in normal operation Operating Conditions Operating temperature: -20C to +60C, -4F to +140F Sealing: IP65 Humidity: 95% non condensing Drop specifications: 0.5m drop to concrete surface Storage Conditions Long term storage temperature: 5 to +20C, +41F to +68F Recharge internal battery to at least 80% of capacity every 12 months