CoolPlay TAKH402 User manual Register your product and get support at www.philips.com/support Contents 1 Important safety instructions 2 2 Hearing Safety General information 2 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Reconnect the headphones to a Bluetooth device Manage your calls and music Wear your headset 5 Technical data 6 Notice Declaration of conformity Disposal of your old product and battery Compliance with EMF Trademarks 3 3 3 3 4 4 5 5 5 5 6 7 8 8 8 8 9 7 Frequently asked questions 10 EN 1 Operate in a place where temperature is between 0C
(32F) and 45C(113F) (up to 90% relative humidity). store in a place where temperature is between -25C
(-13F) and 55C(131F) (up to 50% relative humidity). 2 EN 2 Your Bluetooth wireless headset Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers, register your product at www.philips.com/welcome. With this Philips wireless headset, you can:
enjoy convenient wireless handsfree calls;
enjoy and control wireless music;
switch between calls and music. What's in the box Quick start guide Other devices A mobile phone or device (e.g. notebook, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headset (see 'Technical data' on page 8). Overview of your Bluetooth wireless headphones Philips Wireless kids headphones
(TAKH402) USB charging cable (for charging only)
+ Volume control button Light mode control button
- Volume control button Micro USB charging slot On/o button LED indicator Microphone EN 3 earliest paired device is replaced by the new one. 1 Make sure that the heaphones are fully charged. 2 Press and hold for 2 seconds to turn the headphones on. 3 Make sure that the mobile phone is turned on and its Bluetooth feature is activated. 4 Pair the headphones with the mobile phone. For detailed information. refer to the user manual of your mobile phone. The following example shows you how to pair the headphones with your mobile phone. 1 Activate the Bluetooth feature of your mobile phone, select Philips TAKH402. 2 Enter the headset password0000
(4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password. Philips TAKH402 3 Get started Charge the battery Note Before you use your headset for the rst time, charge the battery for 5 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphones, as connecting the headphones o. You can operate the headphones normally during charging. Connect the supplied USB charging cable to:
the charger/USB port of a the micro USB charging slot on the headphones and;
computer. LED turns white during charging and turns o when the headphones is fully charged Tip Normally,a full charge takes 2 hours. Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the rst time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. if you try to pair more than 8 devices,the 4 EN 4 Use your headphones Connect the headphones to a Bluetooth device Turn on your mobile phone/Bluetooth device. Press and hold for 3 seconds to turn the headphones on. The blue light on. The headphones are recon-
nected to the last connected mobile phone/Bluetooth device automatically. If the headphone can not connect to last device within 13s, enter pairing mode. Tip If you turn on the mobile phone/Bluetooth device or activate the Bluetooth feature after turning on the headphones, you have to reconnect the headphones and mobile phone/Bluetooth device manually. Note If the headphones fails to connect to any Bluetooth device within range in 5 minutes, it will switch o automatically to save the battery life. Manage your calls and music On/o Task Turn the headpnones on. Turn the headpnones o. Button Operation Press and hold for 3 seconds. Press and hold for 3 seconds. Music control Task Play or pause music Adjust volume. Skip forward. Skip backward. Call control Task Pick up/hang up a call. Reject an incoming call. Redial the last call Button The white light on and fades out. Operation Press once. Press once. Press and hold for 1 second. Press and hold for 1 second. Button Operation Press once. Press and hold for 1 second. Double click EN 5 Mute/unmute the microphone in a call. RGB light mode indicator Double click Wear your headset Adjust the headband to t your head. Task Red light mode Green light mode Blue light mode Rainbow light mode Light o Button Operation Press once. Press once. Press once. Press once. Press once. Other headphones indicator status Indicator The blue LED
ashes for every 5 seconds. The LED ashes blue and white alternately. The LED ashes blue and white alternately, the headphones will turn o within 5 minutes. The red LED blinking 3 times for every 1 minute until it power o automatically. Light o. Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. 6 EN 5 Technical data Music time: 20 hours Talk time: 20 hours Standby time: 800 hours Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (200 mAh) Bluetooth 5.0, support (Hands-Free Prole - HFP), Bluetooth stereo supported
(Advanced Audio Distribution Prole - A2DP; Audio Video Remote Control Prole - AVRCP) Frequency range: 2.402-2.480GHz Transmitter power: < 4dBm Operating range: Up to 10 meters
(33 feet) Digital echo & noise reduction Auto power o Note Specications are subject to change without notice. EN 7 8 EN FCC Compliance Statement:
changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. EN 9 If this equipment does cause harmful RF Exposure Compliance Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This trans-
mitter must not be co-located or operating in conjunction with any other antenna or transmitter. ce matriel est conforme aux limites de dose d'exposi-
tion aux rayonnements FCC/IC non-
ces pour un autre environnement.cet metteur ne doit pas tre situes ou oprant conjointement avec toute autre antenne ou l'metteur. interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. ISED Compliance Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interfer-
ence, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouil-
lage est susceptible den compromettre le fonctionnement. 10 EN Make sure your mobile phone not only supports (mono) HFP but also supports A2DP (see Technical data on page 7 ). page 4 Make sure that the LED light ashes blue and white alternately page 7 page 4 11 EN UM_TAKH402_00_EN_V1.0 WK1921