(BASIC ASSET TRACKER, ATD500X) BAT-X USER GUIDE V5.0.2 BAT-X CONTENTS Introduction ....................................................................................................................................................................................... 3 Firmware ............................................................................................................................................................................................ 3 3.1 Firmware Versions .................................................................................................................................................................... 3 4 Quick Start ......................................................................................................................................................................................... 3 How to turn BAT-X on ............................................................................................................................................................... 3 LED Status Indicators ................................................................................................................................................................ 3 5 Operating Modes ............................................................................................................................................................................... 4 Normal Mode ........................................................................................................................................................................... 4 Discovery Mode ........................................................................................................................................................................ 5 Factory Mode ........................................................................................................................................................................... 5 6 Hardware ........................................................................................................................................................................................... 6 Sensors ..................................................................................................................................................................................... 6 Electrical ................................................................................................................................................................................... 6 Miscellaneous ........................................................................................................................................................................... 6 Radios ....................................................................................................................................................................................... 7 Contacts ............................................................................................................................................................................................. 8 Disclaimers ......................................................................................................................................................................................... 8 Version History ................................................................................................................................................................................... 9 1 2 3 7 8 9 4.1 4.2 5.1 5.2 5.3 6.1 6.2 6.3 6.4 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC. BAT-X 2 INTRODUCTION This document describes the Mobilogix BAT-X (Basic Asset Tracker, ATD500X). BAT-X is an asset tracker equipped with LTE CatM1/NB1, quad-band 2G, Bluetooth, GNSS, environmental, and IMU sensors. The BAT-X may be in one of three operating modes. Factory mode is set on BAT-X during production for initial delivery and long-term storage of BAT-X. In Factory mode no radios are on, BAT-X waits for 10 minutes of charging to switch to Normal Mode. While in Normal mode, BAT-X will collect the asset location and sensor data and report the data to a cloud platform via cellular air interface. During Normal mode BAT-X may also collect peripheral data via Bluetooth beacon scanning. After a report BAT-X will sleep until the next report (based on configured hold-off timers and thresholds). While not tracking any assets, or for short term storage, Discovery mode may be entered. Discovery mode shuts down all radios except Bluetooth until a wake-up command is received to push BAT-X into Normal mode. From the factory BAT-X must be connected to charger for 10 minutes to enter Normal Mode. Once BAT enters Discovery Mode it will send BT advertisements a unique name based on the cellular IMEI. To Switch BAT-X from Discovery Mode to Normal Mode write 1 to the Cycling Power Vector. 3 FIRMWARE 3.1 FIRMWARE VERSIONS BAT (Dam App): V5.0.2-official BG96 (Cellular): BG96MAR02A10M1G BGM13P (Bluetooth): V502A3 4 QUICK START 4.1 HOW TO TURN BAT-X ON 4.2 LED STATUS INDICATORS Data LED Slow, short blinks: Trying to register Slow, long blinks: Registered but idle Fast blinks: Data in transit Power LED GNSS LED Green: 100% - 40%
Yellow: 39% - 20%
Red: 19% - 0%
Blinking: Acquiring location Solid: Location acquired 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC. BAT-X Normal Mode will allow BAT-X to go between sleeping and active work states to report data to the cloud. Active work states are triggered by hold-off timers and threshold values according to the BAT-X configuration. Factory Mode to Normal Mode: Charge for 10 minutes Discovery Mode to Normal Mode: Write operation via Bluetooth Normal Mode to Discovery Mode: REST API Normal Mode to Factory Mode: FOTA 5 OPERATING MODES 5.1 NORMAL MODE Entry Triggers:
Exit Triggers:
Available Functions:
Normal Reporting:
Login Location Data Sensor Data o o o o Beacon Report Lux o o Movement o Impact/Drop Alarm Reporting:
Configuration FOTA Radio Modes:
Cellular (BG96): Follows configured settings for wake/sleep Bluetooth (BG13): Scanning for beacons 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC. Discovery Mode is an ultra-low-power mode where BAT-X acts as a Bluetooth beacon. Since no tracking is possible in Discovery Mode it can be used to conserve battery during periods of inactivity. BAT-X 5.2 DISCOVERY MODE Entry Triggers:
Exit Triggers:
Available Functions:
BT OTA BT Advertising Radio Modes:
5.3 FACTORY MODE Normal Mode to Discovery Mode: REST API Discovery Mode to Normal Mode: Write operation via Bluetooth Cellular (BG96): Off Bluetooth (BG13): Bluetooth advertising Entry Triggers:
Exit Triggers:
Available Functions:
Radio Modes:
Normal Mode to Factory Mode: FOTA Factory Mode to Normal Mode: Charge for 10 minutes No functions are available while in Factory Mode, all radios are off. Cellular (BG96): Off Bluetooth (BG13): Off 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com BAT-X shall be configured in Factory Mode from factory production line. Factory Mode can be used for extended storage and long (untracked) transport of BAT-X. The only exit trigger for Factory Mode requires physical access to BAT-X for charging. MOBILOGIX, INC. BAT-X 6 HARDWARE 6.1 SENSORS Shock Magnitude Type Temperature Pressure Humidity Light Shock X-axis Shock Y-axis Shock Z-axis Tilt X-axis Tilt Y-axis Tilt Z-axis 6.2 ELECTRICAL Capacity:
Operating Voltage:
Chemistry:
Runtime:
Charging:
Max Charge Rate:
6.3 MISCELLANEOUS Dimensions:
Processor:
SIM Card:
Units Celsius ( C) Hectopascals (hPa)
% Relative Humidity (%RH) Lux (lx) G Forces G Forces G Forces G Forces Degrees Degrees Degrees Minimum Maximum
-20 300 0 0 1 1 1 1 0 0 0 60 1100 100 64000 25.5 25.5 25.5 25.5 180 180 180 4000 mAh
>3.8 V Li-ion (rechargeable) Up to 1-year battery life on a single charge Micro USB 2.0 (type B receptacle) 1.2 A 23 x 122 x 60 (mm) ARM A7 3FF 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC. BAT-X Quectel BG96 (Qualcomm MDM9206) Silabs BG13P Embedded Cellular/GPS/Bluetooth/WiFi (rx) TX (MHz) RX (MHz) 1980 1910 1785 1755 849 915 716 787 830 845 862 748 2620 848.8 914.8 1784.8 1909.8 2483.5
2110 1930 1805 2110 869 925 729 746 860 875 791 758 2570 869.2 925.2 1805.2 1930.2 1575.4 2400 2400
2170 1990 1880 2155 894 960 746 756 875 890 821 803 2620 893.8 959.8 1879.8 1989.8 1.023 2483.5 2483.5 1920 1850 1710 1710 824 880 699 777 815 830 832 703 2570 824.2 880.2 1710.2 1850.2 2400
23 dBm 23 dBm 33 dBm 30 dBm 27 dBm 2 dB 2 dB 2 dB 2 dB 2 dB 6.4 RADIOS Cellular Module:
Bluetooth Module:
Antenna:
Radio Frequencies:
LTE-FDD B1 LTE-FDD B2 LTE-FDD B3 LTE-FDD B4 LTE-FDD B5 LTE-FDD B8 LTE-FDD B12 LTE-FDD B13 LTE-FDD B18 LTE-FDD B19 LTE-FDD B20 LTE-FDD B28 LTE-TDD B39 850 (B5) 900 (B8) 1800 (B3) 1900 (B2) GPS Bluetooth WiFi Max Output Power:
LTE-FDD LTE-TDD 850 (B5) / 900 (B8) 1800 (B3) / 1900 (B2) 1800 (B3) / 1900 (B2) 8-PSK 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC. BAT-X 7 CONTACTS support@mobilogix.com https://mobilogix.com/contact/
8 DISCLAIMERS 8.1 FCC INTERFERENCE STATEMENT (PART 15.105 (B)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 8.2 FCC PART 15 CLAUSE 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 8.3 FCC PART 15.19(A) [INTERFERENCE COMPLIANCE STATEMENT ], UNLESS THE FOLLOWING STATEMENT IS ALREADY PROVIDED ON THE DEVICE LABEL This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC. BAT-X 8.4 ISED RSS-GEN NOTICE
(1) This device may not cause interference; and This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage;
(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible dencompromettre le fonctionnement. 8.5 FCC RF EXPOSURE GUIDANCE STATEMENT In order to comply with FCC/ISED RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. 8.6 ISED RF EXPOSURE GUIDANCE STATEMENT In order to comply with FCC/ISED RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. Afin de se conformer aux exigences d'exposition RF FCC / ISED, cet appareil doit tre install pour fournir au moins 20 cm de sparation du corps humain en tout temps. 9 VERSION HISTORY Date Description 2020-06-16 Initial document version. 2020-06-19 Disclaimers included. 5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-8895 E: info@mobilogix.com MOBILOGIX, INC.