MET MODEL NO. MET1339 2.1 BLUETOOTH SPEAKER SYSTEM INSTRUCTION MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT Important Safety Instructions Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves,or other apparatus
(including amplifiers) that produce heat. Do not defeat the safely purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other, A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus, When a cart is used, use caution when moving the cart/apparatus combination to avoid injury form tip-over. 13. 14. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2 LOCATION OF CONTROLS Treble Up/Down Pairing Indicator Bass Up/Down Volume Up/Down TREBLE BASS VOLUME POWER SOURCE Power ON/OFF Pair Bluetooth Press to begin pairing. Source Press to switch between Bluetooth and Line In modes. RCA Audio Input DC 6V DC 6V R L AUX INPUT R L SPEAKER OUTPUT DC Jack Stereo Speaker Outputs 3 Power POWER SOURCE R L AUX INPUT DC JACK R L SPEAKER OUTPUT Plug the included AC/DC Switching adapter (Input:100-240V~ 50/60Hz) into the POWER JACK on the dock and an AC power outlet to power the dock. Bluetooth Wireless Audio Pairing to a Device & Playing Audio After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become 1. Power ON the unit and press the Source button to switch to Bluetooth wireless mode. 2. Press the Pair button to begin pairing. The pairing indicator will begin When pairing, remain within 3 feet of the unit. 3. Using the controls on your Bluetooth device, search for and select SHTIB1060-BT in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . for instructions on pairing and connecting Bluetooth devices. 4. When successfully paired, the pairing indicator will turn solid blue. Use the controls on the connected device to select and play audio. Audio Source & Speaker Connections 1. Using a 3.5mm to RCA cable (included), connect the RCA audio inputs to the audio output of an external audio source or system. 2. Connect the left and right speaker cables to the left and right speaker outputs on the subwoofer. 3. To play audio from the connected external source, press the Source button to switch to Line In mode. Audio from the connected source will now be heard through the speakers. R L AUX INPUT DC JACK R L SPEAKER OUTPUT 4