WARNING TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the back enclosure of the apparatus. The Rating plate is located at the back enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience instructions. receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for a long period of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 1 15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction. 20. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 22. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 23. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 24. Excessive sound pressure from earphones and headphone can cause hearing loss. 25. Minimum distances of 4 inches around the apparatus for sufficient ventilation. 26. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. 27. No naked flame sources, such as lighted candles, should be placed on the apparatus. 28. The use of apparatus in moderate climates. 29. Attention should be drawn to the environmental aspects of battery disposal. SAVE THESE INSTRUCTIONS 2 COMPLIANCE WITH FCC REGULATIONS FCC ID: 2ANH76961401 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-
- Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected.
- Consult the dealer or an experienced radio/TV technician for help. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to Stop operation immediately if any liquid or solid object should fall into the cabinet. Do not touch the lens or poke at it. If you do, you may damage the lens and the player may Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door disassemble the casing. not operate properly. is still open. 3 If the unit is not to be used for a long period of time, make sure that all power sources are disconnected from the unit. Remove all batteries from the battery compartment. This unit employs a laser. The use of controls or adjustment or performance of procedures other than those specified here may result in exposure to hazardous radiation. Caution:
- Any use of the controls or performing any of the procedures in a way other than those specified herein may result in hazardous radiation exposure.
- This unit should not be adjusted or repaired by anyone except qualified service personnel. ON PLACEMENT Do not use the unit in places which are extremely hot, cold, dusty or humid. Place the unit on a flat and even surface. Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by covering it with a cloth or by placing it on a carpet. ON CONDENSATION When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When there is condensation inside the unit, the unit may not function normally. Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use. Should any trouble occur, disconnect the AC Adapter and refer servicing to qualified personnel. PROTECT YOUR FURNITURE This system is equipped with non-skid rubber feet to prevent the product from moving when you operate the controls. These feet are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber feet to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture. 4 DEAR STUDEBAKER CUSTOMER distortion. Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level:
Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without Once you have established a comfortable sound level:
Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. We Want You Listening For a Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association's Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. Customer's Record:
The serial number of this product is found on its back cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SB2145 Serial Number:
CONTENTS OF YOUR PRODUCT Main Unit X 1 AC adaptor (DC 12V
) X 1 User Manual X 1 1.5A 5 LOCATION OF CONTROLS 1 MASTER VOLUME 2 TREBLE KNOB 3 BASS KNOB 4 BALANCE KNOB FM TELESCOPIC ANTENNA 5 6 POWER INDICATOR 7 CHARGE INDICATOR 8 BT INDICATOR 16 PROGRAM BUTTON 17 SKIP/FAST BACKWARD BUTTON 18 REPEAT BUTTON 19 PLAY/PAUSE
;
BLUETOOTH PAIR BUTTON BUTTON SKIP/FAST FORWARD 20 LIGHT SHOW /
21 BUTTON 22 DIAL POINTER 23 HEADPHONE JACK 6 9 FM ST. INDICATOR 10 FUNCTION SWITCH 11 BAND SWITCH 12 AUX IN JACK 13 TUNING KNOB 14 LED DISPLAY 15 POWER BUTTON 24 TWEETER 25 MULTI COLOR LIGHT SHOW LED 26 WOOFER 27 CD COMPARTMENT 28 CARRYING HANDLE 29 DC INPUT JACK 30 CD DOOR LATCH POWER SOURCE This unit can be operated using either AC power or the built-in Li-Polymer rechargeable battery AC POWER OPERATION An AC-DC Adaptor with the output of DC 12V, 1.5A (included) is required for operating the main unit when using AC power mode. To connect the AC-DC Adaptor to the unit and 120V~
60Hz AC Outlet:
1. Firmly and securely insert the DC plug of the adaptor into the DC Jack on the back of the unit. light. 2. Plug the AC Adaptor plug into the 120V AC outlet. CHARGE LED will be lighting Red during battery charging. Connecting this system to any other power source may cause damage to the system 3. Press the POWER button on the top panel to turn on the unit, the POWER INDICATOR will Note: When the unit is not operated for long periods of time, unplug the AC adapter from the unit and wall outlet. BUILT-IN RECHARGEABLE BATTERY OPERATION 1. This unit will also operate using the built-in Lithium rechargeable battery. Fully charge the built-in rechargeable battery before first use, the CHARGE INDICATOR will turn from Red to Green when the built-in battery is fully charged. 2. Unplug the DC INPUT jack of main unit. The unit will enter Battery Operating mode automatically. LOW BATTERY INDICATION 1. When the build-in battery power remains around 5%, the CHARGE INDICATOR will light 7 Red and flash, please connect the unit to AC adaptor for charging. 2. After prolonged use, the battery voltage may discharge and operation might become intermittent. When this happens, please recharge the internal battery. CHARGING INSTRUCTIONS CHARGING THE BATTERY WITH THE INCLUDED AC ADAPTOR 1. Charge the built-in Lithium battery a minimum of 5 hours prior to first use. Firmly and securely insert the DC plug of the adaptor into the DC Jack on the back of the unit. 2. Plug the AC Adaptor plug into the 120V AC outlet. Connecting this system to any other power source may cause damage to the system. 3. When the AC power is connected, the battery charging indicator will light solid Red showing that the internal battery is being charged. 4. After the battery is fully charged, the charging indicator will turn to solid Green. Notes:
1.) Charging time will vary if you are listening to music while charging the internal battery. We recommend you place the unit in Power off mode during the charging process or until SB2145 batteries are fully charged. 2.) To prolong the life of a rechargeable battery, it is recommended to completely discharge it before fully charging it again. 3.) Rechargeable batteries need to be cycled for maximum performance and longer battery life. If you dont use the player that often, be sure to recharge the battery at least once a month in order to keep the internal battery working properly. Battery Note and Care Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Recycle Lithium batteries. Do not dispose of in the trash. Use only chargers rated for Lithium cells. Be sure the chargers voltage and current settings are correct for the battery pack being charged. Charge batteries on a fireproof surface away from flammable items or liquids. Batteries should NEVER be left unattended while charging. Only adults should charge the batteries. Follow the manufacturers instructions for charging the product and do not charge longer than recommended. Unplug the charger when the battery is charged or not in use. NOTE: These speakers are not magnetically shielded and may cause color distortion on the screen of some TVs or video monitors. To avoid this, you may need to move the speakers further away from the TV or monitor if unnatural color shifts or image distortion occurs. 1. Press the POWER button to turn on the unit power, the unit will be "On" and power LED RADIO OPERATION indicator lights. 2. Slide the FUNCTION SWITCH to RADIO position. To get the desire FM mode by switch the FM/FM ST. BAND SELECTOR on unit top panel. 3. Tune to your desired station with the TUNING knob. If FM STEREO mode is selected and you tune to a FM Stereo station, the FM STEREO LED Indicator will light. 4. Adjust the MASTER VOLUME knob to obtain the desired sound level. 8 FM & FM-STEREO RECEPTION Set the BAND SELECTOR to FM position. Stations will now be received in MONO mode. When a FM station is weak or distorted, listening is usually improved by switching the band selector to the FM (mono) position. Set the band selector to FM-ST position to receive stereo broadcasts. The FM-Stereo LED indicator will light up to show a FM stereo station is detected. TIPS FOR BEST RADIO RECEPTION If a stereo broadcast program is being received, the FM STEREO INDICATOR will light. During FM or FM Stereo reception, always keep the FM TELESCOPIC ANTENNA fully extended for best performance. However, if FM reception is weak, try repositioning the unit near an open window until you get the best reception. CD OPERATION PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial CDs. They will also read self-compiled CD-R/CD-RW discs but it may take up to 10 seconds for playback to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the compatibility of the CD compilation software. Manufacturer is not responsible for the playback quality of CD-R/RW discs. Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction. 1. Slide the FUNCTION SWITCH to CD position. The display will show - - briefly, if no CD in the CD compartment will show no on the LED display. 2. Grip the OPEN mark on the CD Door and pull gently to open it. 3. Carefully load an audio CD with its label side upward in the CD compartment then gently close the CD door. 4. The player will start reading TOC of the disc, total number of tracks on the CD will appear on the LED DISPLAY after a few seconds. 5. Press the PLAY/PAUSE 6. Adjust the MASTER VOLUME knob to obtain the desired sound. 7. To temporarily stop playing, press the PLAY/PAUSE button to start playing. be flashing. To resume playing, press the PLAY/PAUSE indicator will be solid on. Button. The play/pause indicator will Button again. The play/pause 8. You can skip up or down to a specific track number by pressing the SKIP BACKWARD button. The LED Display will indicate the correct track button or SKIP FORWARD number selected. 9. To locate a particular section within a track, press and hold the
/
button until the section is found. button 10. To stop playing, press the STOP 11. Press the POWER button to turn off the unit after listening. REPEAT MODE Repeat 1 To repeat the current track, press the REPEAT BUTTON once, the REPEAT INDICATOR will flash in LED display. The track will continue to play until the repeat function is turned off. 9 Repeat All To repeat all the tracks, press the REPEAT BUTTON twice, the REPEAT INDICATOR will be solid on. All the tracks on the disc will be played repeatedly. To Cancel Repeat Function: Press the REPEAT BUTTON until REPEAT indicator goes off from LED display. PROGRAM OPERATION This function allows the tracks to be played in a programmed sequence. NOTE: Programs can only be set in STOP mode. 1. In CD stop mode, press PROGRAM button, the PROG indicator will flash. The LED display will briefly show Program Number 01 and then track number 00 will blink on the LED display. 2. Press the SKIP 3. Press the PROGRAM button to confirm the selection. Program Number advances to 02 button to select the desired track. or and show briefly and then track number 00 will blink on the LED display. 4. Repeat step 2 to 3 to program up to maximum of 20 tracks. 5. When maximum of 20 tracks have been programmed, the LED display will show FL to indicate program is full. 6. When you have completed programming, press the PLAY/PAUSE playing. Both PROG and Play/Pause indicators are lighting steadily. button to start 7. To cancel programmed play, press the STOP button twice. PROG indicator goes off. USING TREBLE/BASS/BALANCE CONTROL KNOBS TREBLE: Adjust TREBLE level of music playback. BASS: Adjust BASS level of music playback. BALANCE: Adjust BALANCE for balance left and right speaker. BLUETOOTH OPERATION PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE The Bluetooth feature enables you to stream and play the digital music on your Bluetooth enabled device to your unit. 1. In power on mode, slide the FUNCTION SWITCH to Bluetooth position, the Bluetooth indicator will flash. 2. The unit will start in auto connection mode and search for a previously paired device that is active and in range (30 feet/10 meters). If found, a brief welcome melody will be heard and Bluetooth indicator will change to solid on. If no active device is found, the unit will switch to interactive pairing mode and the Bluetooth indicator keeps flashing. 3. To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device and enable the search or scan feature to find SB2145 in the list of discoverable Bluetooth devices. Select the SB2145 from your available device list when it appears on its screen and a brief welcome melody will be heard if pairing and connection is successful. If you are asked for a password, enter 0000. If no successful pairing and connection is made within 5 minutes, the unit may enter manual pairing mode. You need to press and hold the PAIR button until Bluetooth indicator flashes to initiate a pairing/connecting request to a new or old Bluetooth enabled device. Follow step #3 to complete the process. 4. 10 6. 5. After successfully pairing and connecting your device with SB2145, the unit will emit a brief welcome melody and the Bluetooth indicator will change to solid on. You can now play music from your Bluetooth enabled device wirelessly to the SB2145. If you want to connect the SB2145 to another new external Bluetooth enabled device while button for few seconds to paired with another device, press and hold the PAIR disconnect the existing connection. The unit will emit two short beeps and Bluetooth indicator will change to flash. Repeat steps #3 to #4 above to make a new link. 7. Rotate the VOLUME CONTROL on the top panel to increase the listening volume gradually until a comfortable listening level is reached. BUTTON to control play/pause. 8. Press the PLAY/PAUSE 9. Press the SKIP FORWARD BUTTON to skip to previous song. BUTTON to skip to next song and SKIP BACKWARD Notes:
If you cannot pair the unit with your Bluetooth enabled device, try solving the problem by turning the unit power off, then power on, and then starting the pairing process again. The Bluetooth function of the unit will remain paired unless the paired device goes out of range of 30 feet (10 meters). If the broken link is re-established within 20 seconds, the SB2145 will reconnect to the current paired device automatically. Otherwise you will need to make a manual connection again later. You may need to turn off the Bluetooth function of the paired external device first before make a new link. Refer to manual of your smartphone or external Bluetooth enabled device for correct Bluetooth operation instructions since it may vary from model to model. If your Bluetooth enabled device does not support A2DP, it will not play the music through the SB2145 system even after it is paired and connected successfully. If you are pairing and connecting your personal computer to the SB2145 using Bluetooth, you may need to set the SB2145 as your computers default sound device. RE-LINKING TO A SMARTPHONE OR BLUETOOTH ENABLED DEVICE Even if your smartphone or Bluetooth device is already paired with the SB2145 and with both Bluetooth functions turned on, they can become unlinked at some point due to intentional manual disconnection or undesirable external signal interferences or over-range for more than 10 seconds. If this happens, the unit will emit two short beeps. You can re-link them and resume play by:
1. Select SB2145 from the device list on your smartphone or Bluetooth device. The SB2145 should re-link to your Bluetooth enabled device within 5 seconds. 2. Tap the play button of the music player on your Bluetooth enabled device to resume playback. AUX IN OPERATION You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of the unit by connecting the AUX IN JACK to your external players audio out jack or headphone jack. 1. Plug one end of a 3.5mm audio cable (not included) into the AUX IN JACK and the other end of the cable to the headphone jack of your digital audio player. 2. Slide the FUNCTION SWITCH to the AUX IN position. 3. Turn on and start playing the external device you plugged into the AUX IN JACK. 11 4. Slowly adjust both the volume controls of your unit and the external device until you reach a comfortable listening level. 5. Turn off both the external audio player and this unit after use. Unplug the audio cable from AUX IN jack Notes:
If you connect the unit to the Line-Out Jack of your external device, you only need to adjust the VOLUME CONTROL of your unit. If you connect to the Headphone Jack of your external device, you may need to adjust both the volume controls of your external device and the unit to obtain the desirable listening level. Remember to turn off the unit when you have finished listening. Don't forget to switch off the power of your external audio device as well. USE HEADPHONES (NOT INCLUDED) Inserting the plug of your stereo headphones (not included) into the headphone jack locates on the top panel will enable you to listen in private. When using headphones, the speakers will be disconnected. Read this Important Information before Using Your Headphones 1.) Avoid extended play at very high volume as it may impair your hearing. 2.) If you experience ringing in your ears, reduce the volume or shut off the unit. 3.) Keep the volume at a reasonable level even if your headset is an open-air type designed to allow you to hear outside sounds. Please note that excessively high volume may still block outside sounds. LED LIGHT SHOW
- To turn off the LED light show, press and hold the LIGHT SHOW button.
- To turn on the LED light show, press and hold LIGHT SHOW button again. Note: If the brightness is glaring, turn on room lights or turn off LED light show. RESETTING THE UNIT In case of malfunction due to electrostatic discharge, reset the unit by press and hold POWER button about 8 seconds to reset the unit. The unit will power down and power up once to normal. CARE AND MAINTENANCE 1. Do not subject the unit to excessive force, shock, dust or extreme temperature. 2. Do not tamper the internal components of the unit. 3. Clean your unit with a dry cloth. Solvent or detergent should never be used. 4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. 5. Keep your unit away from heating appliances and sources of electrical noise such as 6. fluorescent lamps or motors. If drop-outs or interruptions occur in the music during CD play, or if the CD fails to play at all, its bottom surface may require cleaning. Before playing, wipe the disc from the center outwards with a good soft cleaning cloth. CLEANING THE UNIT To prevent fire or shock hazard, disconnect your unit from the AC power source when The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, cleaning. 12 Use caution when cleaning and wiping the plastic parts. If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet. If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit. CAUTION: Never allow any water or other liquids to get inside the unit while cleaning. TROUBLE SHOOTING GUIDE Symptom The unit does not respond (no power) Possible Cause Solution The unit is disconnected from the AC outlet. Reconnect to the AC outlet. Unit is ON but there is low or no volume The AC outlet has not power. Volume set too low. FM no sound Bluetooth No Sound Unit not in Radio mode. Unit is not linked with your Bluetooth enabled device. Unit placement out of range. Your Bluetooth enabled device Volume set too low. Try the unit on another outlet. Slowly rotate the MASTER VOLUME knob to increase the volume level. Slide FUNCTION switch to select RADIO. Go through Bluetooth Operations process to link the speakers. Relocate the unit within Bluetooth operating range (30 feet) Increase Volume level of your Bluetooth enabled device. Noise or sound distorted on FM broadcast CD player will not play CD skips while playing Station not tuned properly. FM telescopic antenna is not fully extended. Unit not in CD function mode. CD is installed incorrectly. If the CD is self-compiled, the media used may not be compatible with the player. Disc is dirty or scratched. Fine tune the FM broadcast station. Fully extend the FM telescopic antenna. Slide Function switch to CD. Insert CD with label side up. Use better quality blank media and retest. Wipe CD with clean cloth or use another disc. 13 Intermittent sound from CD Player Sound is distorted Dirty or defective disc. Dirty pick up lens. Player is subject to excessive shock or vibration. Volume level is set too high. Sound source is distorted. Unit gets warm after extended play at high volume This is normal. Clean or replace the defective disc. Use a CD-lens cleaning disc to clean the lens. Relocate the player away from shock or vibration. Decrease the volume. Try a different sound source. If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself. Also try turning bass boost OFF or change the EQ setting. Turn the unit off for a period of time or lower volume SPECIFICATION Radio Frequency Range : FM: 87.5 108 MHz Audio Output Power : 2 X 5W (RMS) Tweeter Woofer Bluetooth Power Source :
AC Adapter : Input AC 120V~ 60Hz Output DC 12V 1.5A
: 2 x 1.5 inch / 6 ohms
: 2 x 4 inch / 6 ohms
: V4.2 + EDR Built-in Rechargeable Lithium Battery: DC 7.4V , 2200mAh Due to continuing improvement, the features and the design are subject to change without notice. 14