2ANH7-393MET1426 FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
if not l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the dealer or an experienced radio/TV technician for help. FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. FCC WARNING:
To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 LOCATION OF CONTROL FRONT VIEW TOP VIEW 3 4 1 5 6 7 8 2 SOURCE LIGHT VOLUME LINE IN STANDBY / AUXIN 9 10 11 12 13 14 15 REAR VIEW DC IN LINE IN R L AUX IN 16 17 18 2 LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Loud Speakers with LED Decorative Lights Subwoofer with LED Decorative Lights Remote Sensor Cradle (To hold Remote Control/External Audio Player/Cell Phone) DJ Scratching Effect Knob SOURCE Button LIGHT On/Off Button Standby On/Off Button
(Skip Backward) Button
(Play/Pause) Button
(Skip Forward) Button
(Bluetooth) Indicator LINE IN Indicator STANDBY/AUX IN Indicator
+_ VOLUME +/- Buttons DC 12V Jack LINE IN (3.5mm Stereo) Jack AUX IN (RCA) Jacks 3 LOCATION OF CONTROL (REMOTE CONTROL) SOURCE MUTE LIGHT 2 3 6 9 1 5 4 7 8 1. 2. 3. 4. 5. 6. 7. 8. 9. Standby On/OFF Button SOURCE Button
(Volume Up) Button
(Skip Backward) Button
(Play/Pause) Button
(Skip Forward) Button MUTE Button
(Volume Down) Button LIGHT Button 4 POWER SOURCE Connect the small plug from the supplied AC/DC Adaptor to the DC 12V Jack on the rear of unit. Connect the AC/DC Adaptor into any convenient household outlet has AC 100-240V, 50/60Hz as illustrated below. The STANDBY/AUX IN Indicator on the top of unit will illuminate. DC IN LINE IN R L AUX IN REAR VIEW Notes:
1. 2. The AC Adaptor is intended to be correctly orientated in a vertical or floor mount position. To save energy, unplug the AC/DC Adaptor from wall outlet if not using the unit for extended periods. POWER SOURCE (Remote Control) In first time use, slide the insulation film from the battery tray and discard it as illustrated follows:
When the button cell is consumed, replace it as follows:
1. Push the tab on the battery tray and slide it out as illustrated below:
1. 2. 2. 3. Install a new CR 2025 button cell to the battery tray as the polarity makings on the rear of remote control cabinet. Close the battery tray. 5 BATTERY PRECAUTIONS:
Follow these Battery Precaution when using a battery in this device:
1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old 4. batteries with fresh ones. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturers instructions.) 6. Do not dispose of battery in fire. Battery may explode or leak. 7. Clean the battery contacts and also those of the device prior to battery installation. 8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burn in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. EFFECTIVE RANGE OF REMOTE TRANSMITTER The effective range of the remote transmitter is 16 Feet (5 Meter); +/- 30 as illustrated on right:
Notes:
1. When there is an obstacle between the unit and the transmitter, the transmitter may not operate. 2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the unit, the unit remote operation may be unstable. 6 Remote sensor 16 Feet (5 Meter) SOURCE MUTE LIGHT OPERATION General Operation:
1. Connect the unit to AC power as previously instructed. The unit will enter to standby mode and the STANDBY/AUX IN Indicator on the top of unit will illuminate. 2. Press the Button on the unit or Remote Control to power on the unit from standby mode. 3. Press the SOURCE Button on the unit or Remote Control repeatedly to switch to desired playback mode. The corresponding indicator will illuminate (or blink) with you selection
(see list below):
Playback Modes:
Indicator:
BT (Bluetooth) LINE IN AUX IN Indicator will illuminate (and blink) LINE IN Indicator will illuminate STANDBY/AUX IN Indicator will illuminate and blink 4. During playback:
Press the Volume +/- buttons on the unit or the +/- buttons on the Remote Control to adjust volume level.
Press the LIGHT Button on the unit or Remote Control to turn off the Decorative LED Lights on the speakers. Press again to turn it on. Turn the DJ scratching Effect Knob to create DJ scratching effects.
Press the MUTE Button on the Remote Control to mute the sound; press again to turn it back. 5. When finished listening, press the Button on the unit or Remote Control to turn the unit to standby mode. The STANDBY/AUX IN Indicator on the top of unit will illuminate. NOTE:
For energy saving, if long period of time not using the unit. Unplug the AC/DC Adaptor from wall outlet. 7 3. 4. During playback:
BT Mode:
BT (Bluetooth) pairing:
First time use or re-pairing the unit to a new BT Device, pair as follows:
1. Power on the unit and enter to BT mode as previously instructed, the Indicator on the top of unit will illuminate and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Indicator will stop blinking. If pairing is complete you may now play music with your external BT Device. Press the Button on the unit or Remote Control to pause; press again to resume to normal playback. Press and release the or buttons on the unit or Remote Control repeatedly to skip tracks. Press the Volume +/- buttons on the unit or the +/- buttons on the Remote Control to adjust volume level. Press the LIGHT Button on the unit or Remote Control to turn off the Decorative LED Lights on the speakers. Press again to turn it on. Turn the DJ Effect Knob to create DJ effects. Press the MUTE Button on the Remote Control to mute the sound; press again to turn it back. 5. When finished listening, press the Button on the unit or Remote Control to turn the unit to standby mode. The STANDBY/AUX IN Indicator on the top of unit will illuminate. Notes:
When the external BT Device searched the unit, our model number MHT983 will appear on the display of external BT Device. If while pairing you are asked for a code please try "0000" or "1234". Normal operation after pairing:
1. Power on the external BT Device and enter to BT playback mode. 2. Power on the unit and enter to BT mode as previously instructed. The Indicator will illuminate and blink. 3. Wait a few seconds until the unit is automatically paired to the external BT Device. The 4. After pairing is complete you may now play music with your external BT Device. Indicator will stop blinking. 8 LINE IN:
Listen from an external Audio Player such as MP3 Player, Discmanetc. 1. In power off mode, connect one end of supplied Audio Connection Cable to the AUX Out/Line Out/Phone Jack on the external Audio Player. 2. Connect the other end of the cable to the AUX IN Jack on the rear of unit as illustrated below:
REAR VIEW DC IN LINE IN R L AUX IN or U T P E IN N O H P R A O E T 3. Power on the unit and enter to AUX IN mode as previously instructed, the LINE IN Indicator on the top of unit will illuminate.
(Make sure the volume level of the connected Audio Player is turned to high level.) 4. Play the music on the connected Audio Player as usual. 5. When finished listening, press the Button on the unit or Remote Control to turn the unit to standby mode. The STANDBY/AUX IN Indicator on the top of unit will illuminate. AUX IN:
Listen from an external Audio/Video Player such as Television, DVD Playeretc. 1. In power off mode, connect one end of RCA Audio/Video Connection Cable (not includ-
ed) to the RCA Audio Out Jacks on the external Audio/Video Player. 2. Connect the other end of the cable to the AUX IN Jacks on the rear of unit as illustrated below:
REAR VIEW DC IN LINE IN R L AUX IN OUT OUTPUT OR 3. Power on the unit and enter to AUX IN mode as previously instructed, the STAND-
BY/AUX IN Indicator on the top of unit will illuminate and blink. 4. Play the music on the connected Audio/Video Player as usual.
(Make sure the volume level of the connected Audio Player is turned to high level.) 5. When finished listening, press the Button on the unit or Remote Control to turn the unit to standby mode. The STANDBY/AUX IN Indicator on the top of unit will illuminate. 9 TROUBLE SHOOTING GUIDE Check the following before requesting service:
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Cant power on The unit has not connected to AC power outlet No sound or weak sound Volume of the unit was set to minimum position Connect the supplied AC/DC Adaptor to the unit and AC wall outlet Increase the volume level press the Volume + Button on the unit or the + Buttons on the Remote Control Volume level of paired/con-
nected device is in low level Rise the volume level of the paired/connected device Sound distortion Volume level too high Bass level too high Reduce the volume level by press the Volume - Button on the unit or the - Button on the Remote Control Reduce the bass volume level of the paired/connected device BT not functioning The external BT device had NOT paired to the unit Pair the external BT device to the unit as page 8 indicates The external BT device is too far from the unit Place the external BT device close to the unit 10 GENERAL SPECIFICATIONS:
Power Source: .............................................................. Impedance of Speakers:
DC 12V, 2A, Loud Speaker: .......................................................................... Subwoofer: .................................................................................... 10W; 8 x 2 20W; 4 Audio Power:
Loud Speakers: ................................................... Subwoofer: ................................................................................ BT Version: ................................................................................................... BT Operation Distance: ................................................. 5W x 2 (Total 10W, RMS) 15W (RMS) 4.1 32 Feet in open area PACKAGE INCLUDES:
1 x Owners Manual 1 x Remote Control (Uses 1 x CR2025 Button Cell, included) 1 x AC/DC Adaptor (Input: AC 100-240V~, 50/60Hz, 0.75A;
1 x Audio Connection Cable with 3.5 mm plugs Output: DC 12V, 2A, ) SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 11 LIMITED WARRANTY