Monster Cable Products Inc. Universal FM Transmitter User guide Preliminary Draft Setup Instructions:
This product is fitted with a stereo headphone plug. It is designed to connect to the "Headphones" output of audio playback devices such as portable MP3 players, CD players, and stereo tape recorders. 1. Plug the Monster Universal FM transmitter to the headphones jack of your portable audio device. 2. Plug the Monster Universal FM transmitter to your automobile 12v cigarette lighter outlet. 3. Set the Monster Universal FM transmitter to desired FM channel by pressing the push-button switch and noting the channel indication. 4. Tune your automobile FM stereo to same channel as indicated by Monster Universal FM transmitter. 5. Set audio device to playback and adjust its volume control to same setting you normally use when listening with your headphones. 6. Adjust automobile FM stereo volume control to desired level. For best results, preset the Monster Universal FM transmitter to FM channels that are not occupied by strong local FM broadcast stations. Additional information is available at www.monstercable.com. Warranty does not include malfunction caused by accident, misuse, contact with solvent chemicals or malfunction caused by tampering or modification. This warranty excludes all incidental or consequential damages. Some states do not allow the exclusion or limitation of consequential damages so the above limitation may not apply to you. For Warranty Service, the product must be returned at your expense to place of purchase. Return policies may vary. If you cannot reasonably do this, please contact us stating the nature of the defect and date of purchase. Include a copy of your sales slip or proof of purchase. Your repaired or replacement equipment will be returned to you at our expense. This warranty gives you specific rights: you may also have other legal rights which vary from state to state. FCC Notice: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by Monster Cable Products Inc. may void the users authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help. Monster Cable Products, Inc. 455 Valley Drive Brisbane, CA 94005 Phone 415-840-2000 FCC ID : RJE160836-00