all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Exhibit 8 Users Manual | Users Manual | 2.33 MiB | ||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Setup Photos |
1 2 3 4 | Exhibit 8 Users Manual | Users Manual | 2.33 MiB |
FCC ID: IHDP56JX1 APPLICANT: MOTOROLA, INC. INSTRUCTION MANUAL A preliminary draft of the Users Manual follows this page. The text on the following 5 pages will be added to the user manual if not already included. EXHIBIT 8 Specific Absorption Rate Data SAR Data This model wireless phone meets the governments requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR SAR Data level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 1.08 W/kg, and when worn on the body, as described in this user guide, is 0.81 W/kg. The SAR value for this product in its data transmission mode (body-worn use) is not measured. (Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. DRAFT Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association
(CTIA) Web site:
http://www.phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site:
http://www.cwta.ca 1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. 2. SAR Data DRAFT encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Notice To Users FCC NoticeMotorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). If your mobile device or accessory has a USB connector, or is otherwise considered a computer peripheral device whereby it can be connected to a computer for purposes of transferring data, then it is considered a Class B device and the following statement applies:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is FCC Notice DRAFT Hearing Aid Compatibility with Mobile Phones Some Motorola phones are measured for compatibility with hearing aids. If the box for your particular model has Rated for Hearing Aids printed on it, the following explanation applies. When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing Exhibit 8 DRAFT device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices telecoil (T Switch or Telephone Switch) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones. Exhibit 8 DRAFT Motorola Hint TM QA30 Users Guide DRAFT DRAFT HELLOMOTO Thanks for purchasing the Motorola HintTM QA30 CDMA wireless phone! Its an affordable phone with a sleek design thats sure to get attention. Features at Your Fingertips More ways to keep in touch, all available directly from the home screen: IM; E-mail;
and Conversations, an outstanding new feature that provides a chatroom-like experience (see your Quick Start Guide). Multimedia on the Move Enjoy rich imaging and music wherever you go. Take pictures and video in a snap with the 2 megapixel camera. Play your favorite tunes with the digital music player. My Phone, My Way Its your phonemake it that way. Customize your home screen with personal pictures, change wallpapers, and use your favorite song as your ringtone. 1 DRAFT Heres a quick anatomy lesson. Navigation Key Left Soft Key Send Key Music Key Function Key Camera/
Camcorder Key 2 Center Key Right Soft Key Power/End Key Back Key back Messaging Key Voice Record/
Speakerphone Key Browser Key DRAFT Here are more of your phones features:
Camera Lens Micro USB Port Insert battery charger
& other accessories. Voice Key Headset Port Keypad Lock Press & hold to lock keypad. Volume Keys 3 DRAFT Home Screen Main Menu 1 Press & hold the power/end key until the display lights up. L Contacts Conversations Alltel Web IM E-mail Fri 08/08/08 8:59 AM Celltop Alltel Nav Main Menu 3 Press the navigation key K up/down/left/right to scroll to a menu feature. E L Alltel Web Phonebook
Music Player u Celltop Messages Alltel Apps q j Recent Calls Multimedia E m Bluetooth Tools Settings Phone Info back back 2 Press the left soft key to open the Main Menu. 4 Press the center key D to select it. 4 DRAFT Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement, or warranty service, please contact the Motorola Customer Support Center at:
1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Certain mobile phone features are dependent on the capabilities and settings of your service providers network. Additionally, certain features may not be activated by your service provider, and/or the providers network settings may limit the features functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this users guide, are based upon the latest available information and believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation. MOTOROLA and the Stylized M Logo are registered in the US Patent &
Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. Yahoo! and the Yahoo! logo are trademarks and/or registered trademarks of Yahoo!
Inc.Gmail and Google SMSTM mobile messaging service are trademarks of Google Inc. The XM name is a registered trademark of XM Satellite Radio Inc. MySpace and MySpace Mobile are trademarks of MySpace, Inc. All other product or service names are the property of their respective owners. 2008 Motorola, Inc. All rights reserved. Caution: Changes or modifications made in the radio phone, not expressly approved by Motorola, will void the users authority to operate the equipment. Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third-party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third-party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Manual Number: -A 5 DRAFT contents menu map . 8 Use and Care . 10 get started . 11 about this guide . 11 battery . 12 battery charging . 14 basics . 16 home screen. 16 adjust volume . 19 handsfree . 19 lock & unlock phone . 20 keypad lock . 21 lock application . 21 codes . 21 if you forget a code. 22 manage memory . 22 6 contents TTY operation. 24 airplane mode . 26 tips & tricks. 27 personalize . 28 home screen shortcuts . 28 voice readout . 28 key volumes. 29 alert reminders. 29 ring & vibrate . 29 answer options . 29 banner . 30 backlight. 30 brightness . 30 dial fonts . 30 clock format . 30 menu language . 30 slider close. 31 restore phone . 31 AGPS & your location . 31 AGPS limitations & tips . 32 calls. 33 redial a number . 33 automatic retry . 33 turn off a call alert . 33 recent calls . 34 return a missed call . 34 speed dial . 35 one-touch dial . 35 emergency calls . 35 AGPS during an emergency call . 36 attach number . 37 insert special characters . 37 international calls. 37 DRAFT hearing aid. 38 in-call options . 38 call times. 38 more calling features. 40 text entry . 41 entry modes . 42 messages . 45 send a multimedia message . 45 receive a message . 48 conversations . 49 Google SMS mobile messaging service . 50 email . 51 voicemail . 52 more messaging features . 53 entertainment . 56 XM Radio Mobile. 56 Google Mobile. 56 myspace mobile . 57 camera/camcorder . 57 view pictures . 62 play videos . 63 manage sounds . 66 browser . 67 tools . 68 voice recognition . 68 phonebook . 73 network . 75 personal organizer . 76 connections. 78 cable connections. 78 Bluetooth connections . 79 service & repairs . 85 SAR Data . 86 Safety Information . 90 Industry Canada Notice . 93 FCC Notice. 93 Warranty . 94 Hearing Aids . 97 WHO Information. 98 Registration . 98 Export Law . 99 Recycling Information . 99 Perchlorate Label . 99 Privacy and Data Security . 100 Driving Safety. 100 index . 102 contents 7 DRAFT menu map j Multimedia
Music & Sounds
Camera
Pictures
Camcorder
Videos
Storage Device Music Player
^ Celltop E Bluetooth m Tools
Voice Commands
Calendar
Alarm Clock
World Clock
Calculator
Notepad u Settings
(see next page) Phone Info
My Number
SW/HW Version
Icon Glossary This is the standard main menu layout. Your phones menu may be different. main menu Messaging
Create Message
Conversations
Inbox
Outbox
Drafts
Voicemail
Google SMS Alltel Apps E Alltel Web
Browser
MySpace
Google L Phonebook
New
Contact List
Groups
Speed Dial q Recent Calls
Received Calls
Missed Calls
Dialed Calls
All Calls
Timers 8 menu map DRAFT settings menu Sounds
Call Ringtone
Message Ringtone
Voicemail Ringtone
Ring & Vibrate
Alert Reminders
Service Alerts
Power On/Off
Voice Readout
Keypad Volume
Volume Sidekeys
Display
Banner
Backlight
Brightness
Wallpaper
Dial Fonts
Clock Format
Phone
Airplane Mode
Shortcuts
Language
Location
Security
Network Selection
Active Line
Text Learning
Airtime Warning
Slider Close
Call
Answer Options
Auto Retry
TTY Setup
One Touch Dial
Intl Dialing
DTMF Tones
Hearing Aid
Bluetooth
Add New Device
USB
Mass Storage
Modem/COM
Storage Device
Save Options *
Phone Memory
Memory Card *
Phone Info
My Number
SW/HW Version
Icon Glossary
Software Update
* available only when optional memory card installed menu map 9 DRAFT Use and Care Use and CareTo care for your Motorola phone, please keep it away from:
liquids of any kind dust and dirt Dont expose your phone to water, rain, extreme humidity, sweat, or other moisture. If it does get wet, dont try to accelerate drying with the use of an oven or dryer, as this may damage the phone. extreme heat or cold Avoid temperatures below -10C/14F or above 45C/113F. Dont expose your phone to dust, dirt, sand, food, or other inappropriate materials. cleaning solutions To clean your phone, use only a dry soft cloth. Dont use alcohol or other cleaning solutions. microwaves Dont try to dry your phone in a microwave oven. the ground Dont drop your phone. 10 Use and Care DRAFT get started CAUTION: Before using the phone for the first time, read the Important Safety and Legal Information included in the gray-
edged pages at the back of this guide. about this guide This guide shows how to locate a menu feature as follows:
Find it: Main Menu > q Recent Calls > Dialed Calls This means that, from the home screen:
1 2 3 Press the left soft key - (Main Menu) to open the menu. Press the navigation key K to scroll to q Recent Calls, and press the center key D to select it. Press K to scroll to Dialed Calls, and press D to select it. symbols This means a feature is network/subscription dependent and may not be available in all areas. Contact your service provider for more information. This means a feature requires an optional accessory. get started 11 DRAFT battery install & charge battery See your Quick Start Guide for instructions on installing and charging the battery. conserve battery charge Using certain features can quickly deplete your batterys charge. These features can include downloading music, replaying video clips, and using Bluetooth wireless connections. You can conserve your batterys charge by doing the following:
Turn Bluetooth power off when not in use (see page 79).
Turn off wallpaper (see your Quick Start Guide).
Reduce backlight display time (see page 30). 12 get started battery use & safety IMPORTANT: HANDLE AND STORE BATTERIES PROPERLY TO AVOID INJURY OR DAMAGE. Most battery issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries. DONTs
Dont disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.
Dont let the phone or battery come in contact with water. Water can get into the phones circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola even if they appear to be working properly.
Dont allow the battery to touch metal objects. If metal objects, such as jewelry, stay DRAFT in prolonged contact with the battery contact points, the battery could become very hot. damaged from dropping or high temperatures.
Dont place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore:
Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.
Avoid leaving your phone in your car in high temperatures. DOs
Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.
Do contact your service provider or Motorola if your phone or battery has been IMPORTANT: USE MOTOROLA ORIGINAL PRODUCTS FOR QUALITY ASSURANCE AND SAFEGUARDS. To aid consumers in identifying authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. Consumers should confirm that any battery they purchase has a Motorola Original hologram. Motorola recommends you always use Motorola-branded batteries and chargers. Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:
Remove the battery and inspect it to confirm that it has a Motorola Original hologram;
If there is no hologram, the battery is not a Motorola battery;
get started 13 DRAFT
If there is a hologram, replace the battery and retry charging it;
If the message remains, contact a Motorola Authorized Service Center. Important: Motorolas warranty does not cover damage to the phone caused by non-Motorola batteries and/or chargers. Warning: Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage, or other hazard. PROPER AND SAFE BATTERY DISPOSAL AND RECYCLING Proper battery disposal is not only important for safety, it benefits the environment. Consumers may recycle their used batteries in many retail or service provider locations. Additional information on proper disposal and recycling may be found on the Web:
www.motorola.com/recycling 14 get started
www.rbrc.org/call2recycle/ (in English only) Disposal: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries. Warning: Never dispose of batteries in a fire because they may explode. battery charging Notes for charging your phones battery:
When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0C (32F) or above 45C
(113F) when charging.
New batteries are not fully charged. DRAFT New batteries or batteries stored for a long time may take more time to charge.
Motorola batteries and charging systems have circuitry that protects the battery from damage from overcharging. get started 15 DRAFT basics home screen Your phone shows the home screen when you are not on a call or using the menu. Status Indicators Left Soft Key Label Left Soft Key L Contacts Conversations E-mail Fri 08/08/08 8:59 AM Alltel Web IM Alltel Nav Celltop Main Menu back Soft key labels in the home screen show the current soft key functions. Status indicators at the top of your phones display provide important information about your phone, such as incoming calls, missed messages, and other conditions. Here are the indicators you may see:
Right Soft Key Label Right Soft Key indicator 8 C Signal StrengthVertical bars show the strength of the network connection. DigitalPhone is in a CDMA digital coverage area. Note: Your home screen might look different from the one shown. EVDO CoveragePhone is in an EVDO (fast broadband internet service) coverage area. 16 basics DRAFT indicator J W 5 1xRTTPhone is in a 1xRTT coverage area.
(1xRTT offers higher voice and data transmission than CDMA.) EVDO/ 1xRTT CoveragePhone is an area with both EVDO coverage and 1xRTT coverage. Airplane ModePhones features that require voice or data transmission are turned off (see page 26). RoamingPhone is in a digital coverage area and is roaming off network. SSLIndicates phone is using Secure Sockets Layer (SSL) secure data transmission. Data CallShows during an active data call. indicator DormantIndicates phone is dormant and PPP session is active. 9 G 8 0 A No ServicePhone is in area with no service coverage. VR ActiveIndicates the phones Voice Recognition feature is active (see page 68). VR ListeningIndicates the phones Voice Recognition feature is waiting for a voice command (see page 68). TTYPhone is in TTY mode (see page 24). 911 OnlyLocation is set to Off (E911 Only). Location OnLocation is set to On (Do Not Ask) or On (Always Ask). Keypad LockedThe keypad is locked. Battery LevelShows battery charge level. The more bars, the greater the charge. basics 17 DRAFT indicator Bluetooth ActiveYour phone is paired to another Bluetooth device. Bluetooth OnYour phones Bluetooth power is On. Bluetooth ConnectedYour phone is connected to another Bluetooth device. In CallShows during an active voice call. New Message Phone received a new text message. New Voicemail Message Phone received a new voicemail message. New Text & Voicemail Message Phone received a new text and a new voicemail message. t
w
indicator All Sounds OffMaster Volume is set to All sounds off (see the Quick Start Guide). H
i h Vibrate OnlyMaster Volume is set to Vibrate Only (see the Quick Start Guide). Alarm OnlyMaster Volume is set to Alarm Only
(see the Quick Start Guide). Missed CallPhone received an unanswered call. Speakerphone OnSpeakerphone is on. Alarm OnAn alarm has been set. Calendar EventA calendar event has been created. 18 basics DRAFT adjust volume Press the volume keys up or down to:
Volume Keys turn off an incoming call alert
adjust the earpiece volume during calls change sound settings (see the Quick Start Guide) handsfree Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you cant concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. handsfree speaker To activate the handsfree speaker during a call, press the voice record/speakerphone key u. You will hear an audible alert and see the speakerphone indicator i and SPEAKER PHONE ON. Voice Record/-
Speakerphone Key The handsfree speaker stays on until you press and hold the voice record/speakerphone key again or turn off the phone. To turn off the handsfree speaker, press and hold the voice record/speakerphone key. Your phone will show SPEAKER PHONE OFF. To end the call, press the power/end key I. You will hear an audible alert. Note: The handsfree speaker wont work when your phone is connected to a handsfree car kit or headset. basics 19 DRAFT accessory volume settings (car kit or headset) To adjust volume of headsets or car kit accessories that are enabled for Bluetooth wireless connections, press your phones volume keys up or down during an active call. lock & unlock phone You can lock your phone manually or set it to lock automatically whenever you turn it off. To lock or unlock your phone, you need the four-digit unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you have to unlock it to answer. You can make emergency calls on your phone even when it is locked (see page 35). manual lock Find it: Main Menu > u Settings > Phone > Security 1 When prompted, enter the four-digit unlock code and press Done. 2 Scroll to Lock Phone Now and press D. 3 When prompted, enter the four-digit unlock code and press Done. To unlock your phone, press Unlock (the right soft key). When you see Enter Unlock Code, enter your four-digit unlock code and press Done. automatic lock To lock the phone whenever you turn it on:
Find it: Main Menu > u Settings > Phone > Security 1 When prompted, enter the four-digit unlock code and press Done. 20 basics DRAFT 2 3 Scroll to Phone Lock Setting and press D. Scroll to On Power Up and press D. The phone will be locked whenever it is turned on. To unlock the phone when you turn it on, enter the four-digit lock code in the Enter Lock Code entry area and press Done. keypad lock You can lock the phones keypad to prevent accidental key presses. To lock the keypad, from the home screen, press and hold the keypad lock key at the top of the phone (see page 3). To unlock the keypad, press and hold the keypad lock key again. lock application Find it: Main Menu > u Settings > Phone > Security 1 When prompted, enter the four-digit unlock code and press Done. Scroll to Restrictions and press D Scroll to the desired application and press D: Calls, Messages, Location, Data Modem, Alltel Apps, Browser. 2 3 codes Your phones four-digit unlock code is originally set to 1234 or to the last four digits of your phone number. The six-digit security code is originally set to 000000. Your service provider may reset these codes before you get your phone. If your service provider didnt change the unlock code, you should change it to prevent unauthorized use of your phone. The unlock code must contain four digits. basics 21 DRAFT To change the unlock code:
Find it: Main Menu > u Settings > Phone > Security 1 When prompted, enter the four-digit unlock code and press Done. 2 With Edit Lock Code highlighted, press D. 3 Enter the new code in both entry fields and press Done. if you forget a code Your phones four-digit unlock code is set at the factory to 1234 or to the last four digits of your phone number. The six-digit security code is set to 000000. If you forget your security code, contact your service provider. manage memory Note: The microSD memory card is an optional accessory, available separately. You can store multimedia content such as songs and photos on your phones internal memory or on a removable microSD memory card. Your phone automatically creates folders on the memory card named My_Images (for photos), My_Videos (for video clips), and My_Sounds (for sound files). You can also create your own folders on the memory card. Note: If you download a copyrighted file to your phone and store it on your memory card, you can use the file only when your memory card is inserted in your phone. You cannot send, copy, or change copyrighted files. See your Quick Start Guide for instructions on installing a memory card. 22 basics DRAFT set memory for multimedia content You can specify where multimedia content is savedin phone memory or in folders on the memory card. Find it: Main Menu > u Settings > Storage Device 1 With Save Options highlighted, press D. 2 3 Scroll to Pictures, Videos, or Sounds, and press D. To save to phone memory, select Phone Memory and press D. To save to an existing folder on the memory card, select the name of the folder and press D. To save to a new folder that you create on the memory card, select (New Folder) and press D, then enter a name for the folder and press Save. view memory information Find it: Main Menu > u Settings > Storage Device 1 2 Select Phone Memory or Memory Card and press D. If you selected Phone Memory in step 1, select Phone Memory Usage, My Pictures, My Videos, or My Sounds, and press D. If you selected Memory Card in step 1, select Memory Card Usage, My Pictures, My Videos, My Sounds, or Format Memory Card, and press D. move files You can move files (such as photos, videos, sound, and music files) to the memory card to free up phone memory. Note: Moving a file to the memory card deletes it from phone memory. You can also move files from one folder to another on your memory card. basics 23 DRAFT Find it: Main Menu > u Settings > Storage Device 1 2 3 4 5 Select Phone Memory or Memory Card and press D. Scroll to My Pictures, My Videos, or My Sounds, and press D. If necessary, scroll to the folder you want and press D. Press Options, then scroll to Move and press D. Scroll to each file you want to move and press D. Press Mark All if you want to move all files. Note: Files that were preloaded on your phone cant be moved. 6 When you have selected all files that you want to move, press Done. 7 If moving the file(s) from a folder on the memory card, select Phone, the name of a folder, or 24 basics
(New Folder), and press D. If you selected (New Folder), enter the folder name and press Save. If moving the file(s) from phone memory, select the name of a folder or (New Folder) and press D. If you selected (New Folder), enter the folder name and press Save. 8 When your phone asks if you want to move the file(s), select Yes and press D to confirm that you want to move the file(s). TTY operation You can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phones headset jack and set the phone to operate in one of three TTY modes. Use a TSB-121 compliant cable (provided by the TTY device manufacturer) to connect the TTY device to the phone. DRAFT Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as needed to minimize errors. For optimal performance, your phone should be at least 12 inches (30 centimeters) from the TTY device. Placing the phone too close to the device may cause high error rates. set TTY mode When you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected. Find it: Main Menu > u Settings > Call > TTY Setup Select one of the following TTY Setup options:
option Voice TTY VCO HCO Set to standard voice mode. Transmit and receive TTY characters. Receive TTY characters but transmit by speaking into phone microphone. Transmit TTY characters but receive by listening to phone earpiece. When your phone is in TTY mode, during an active call your phone displays the international TTY mode, the international TTY symbol, and the mode setting. basics 25 DRAFT airplane mode Note: Consult airline staff about the use of Airplane Mode in flight. Turn off your phone whenever instructed to do so by airline staff. Use airplane mode to turn off your phones calling features in locations where wireless phone use is prohibited. You cannot make or receive calls or use Bluetooth wireless connections in airplane mode, but you can use your phones other non-calling features. Find it: Main Menu > u Settings > Phone > Airplane Mode
> On or Off 26 basics DRAFT tips & tricks From the home screen, you can use shortcuts:
To... Do this... To... play music Do this... Press [. See your Quick Start Guide for more information on using your phones music player. Press , then #. see your number redial a number lock/unlock keypad Press J, then scroll to the number you want to call and press J again. To lock the keypad, press and hold the keypad lock key at the top of the phone (see page 3). To unlock the keypad, press and hold the keypad lock key again. take photos Press w. tips & tricks 27 DRAFT personalize home screen shortcuts From the home screen, you can push the navigation key up, down, left, or right to select shortcuts to your favorite features. Your phone includes these shortcuts on the home screen:
home screen shortcuts L Contacts g Conversations P E-mail x Alltel Web x IM x Alltel Nav See your Quick Start Guide for information on these options. 28 personalize To change the shortcuts:
Find it: Main Menu > u Settings > Phone > Shortcuts Select a navigation key direction, then choose the feature you want to open when you press the key in that direction. Select Reset All to reset the shortcuts to the factory defaults shown above. voice readout You can set your phone to speak aloud when you press keys, receive a call with caller ID available, or scroll through the Phonebook or recent calls lists. Find it: Main Menu > u Settings > Sounds > Voice Readout DRAFT key volumes To set the volume of the tones played when you press keypad keys:
Find it: Main Menu > u Settings > Sounds > Keypad Volume To se whether your phone plays tones when you press side keys:
Find it: Main Menu > u Settings > Sounds > Volume Sidekeys alert reminders Set how many times your phone plays a message alert:
Find it: Main Menu > u Settings > Sounds > Alert Reminders Select Once, Every 2 Minutes, Every 15 Minutes, or Off. ring & vibrate Set your phone to ring and vibrate when you receive an incoming call or message. Note: Master Volume must be set to High, Med High, Medium, Low Med, or Low (see the Quick Start Guide). Find it: Main Menu > u Settings > Sounds > Ring & Vibrate answer options You can use different methods to answer an incoming call. Find it: Main Menu > u Settings > Call > Answer Options options Slider Open Any Key Send Only Auto Answer with Handsfree Answer by opening the slider. Answer by pressing any key. Answer only by pressing J. Automatically answer incoming calls when the phone is connected to a handsfree device, such as a car kit or headset. personalize 29 DRAFT Find it: Main Menu > u Settings > Display > Dial Fonts clock format Set how your phone shows the current time:
Find it: Main Menu > u Settings > Display > Clock Format 1 2 Scroll to Inside Clock (main screen) or Outside Clock
(external display) and press D. Select Digital 12 for a 12-hour clock, Digital 24 for a 24-hour clock, Analog for a dial clock, or Off for no clock, and press D. menu language Find it: Main Menu > u Settings > Phone > Language banner Set a heading to display near the top of the home screen:
Find it: Main Menu > u Settings > Display > Banner backlight Set the amount of time that the display and keypad backlights stay on. Find it: Main Menu > u Settings > Display > Backlight brightness Find it: Main Menu > u Settings > Display > Brightness dial fonts Set the phone to display numbers that you enter in large type:
30 personalize DRAFT slider close Set whether your phone ends a current task and returns to the home screen when you close the slider:
Find it: Main Menu > u Settings > Personalize > Slide Tone 4 When prompted, enter the four-digit unlock code
(see page 21) and press Done. The screen does not change while the phone resets all options. After a few seconds, the phone turns off and then back on. restore phone Reset all options except unlock code, security code, and lifetime timer:
Find it: Main Menu > u Settings > Phone > Security 1 When prompted, enter the four-digit unlock code
(see page 21) and press Done. Scroll to Restore Phone and press D. Confirm that you want to reset the phone by scrolling to Yes and pressing D. 2 3 AGPS & your location Your phone uses the Automatic Location Information
(ALI) feature, along with AGPS satellite signals, to tell the network where you are physically located. When ALI is set to Location > On (Do Not Ask) or On (Always Ask) your phone shows the O (ALI on) indicator. Services may use your known location to provide useful information (for example, driving directions, or the location of the nearest bank). Your phone prompts you when the network or a service asks for your location. You can refuse at this point. personalize 31 DRAFT When ALI is set to Location > Off (E911 Only), your phone displays the P (ALI off) indicator, and the phone does not send location information unless you call the emergency phone number (such as 911). Find it: Main Menu > u Settings > Phone > Location AGPS limitations & tips Your phone uses Assisted Global Positioning System (AGPS) satellite signals to estimate your location. If your phone cannot find strong satellite signals, your AGPS might be slower, less accurate, or it might not work at all. AGPS provides only an approximate location, often within 150 feet (45 meters) but sometimes much farther from your actual location. To improve AGPS accuracy:
Go outside and away from underground locations, covered vehicles, structures with metal or concrete roofs, tall buildings, and 32 personalize foliage. Indoor performance might improve if you move closer to windows, but some window sun shielding films can block satellite signals.
Move away from radios, entertainment equipment, and other electronic devices that might interfere with or block AGPS satellite signals.
If your phone has a retractable antenna, extend the antenna.
Hold your phone away from your body, and point the phone antenna toward the sky. Do not cover the antenna area with your fingers. AGPS uses satellites controlled by the U.S. government and subject to changes implemented in accordance with the Department of Defense AGPS user policy and the Federal Radio Navigation Plan. These changes might affect AGPS performance. DRAFT calls To make and answer calls, see your Quick Start Guide. redial a number Press J to see the All Calls list. 1 2 3 Scroll to the entry you want to call. Press J to redial the number. Note: The All Calls list includes numbers that were busy when you dialed. automatic retry When you receive a busy signal, your phone displays Call Failed, Number Busy. When you turn on automatic retry, your phone automatically redials a busy number for four minutes. When the call connects, your phone rings or vibrates once, displays Redial Successful, and completes the call. Find it: Main Menu > u Settings > Call > Auto Retry When automatic retry is turned off, you can manually activate the feature to redial a phone number. When you hear a fast busy signal and see Call Failed, press or RETRY. turn off a call alert When you hear a call alert for an incoming call, you can press the volume keys to turn off the alert before answering the call. calls 33 DRAFT recent calls Your phone keeps lists of the calls you recently received and dialed, even if the calls didnt connect. The lists are sorted from newest to oldest calls. The oldest calls are deleted as new calls are added. Find it: Main Menu > q Recent Calls 1 2 3 Scroll to Received Calls, Missed Calls, Dialed Calls, or All Calls, and press D. Scroll to an entry. Press J to to call the number. To see call details (like time and date), press D. Press Options to open the Options menu, which can include Save, Lock, Delete, Delete All, and Timers. To send a message to the entry, press Send Msg. 34 calls return a missed call Your phone keeps a record of your unanswered calls. When you miss a call, your phone shows the =
(missed call) indicator and [Number] Missed Calls. To view missed calls immediately:
1 When you see the missed call indicator, select View Now to see the missed calls list. 2 3 Scroll to an entry on the list. Press J to call the entry. To see call details (like time and date), press D. Press Options to open the missed calls Options menu
(see page 34. Press Send Msg to send a message to the entry. To return a missed call later, select View Later when you see the missed calls indicator. For more information on viewing and returning missed calls, see page 34. DRAFT speed dial Note: Speed dial number 1 is already assigned to your voicemail number. To assign a speed dial number to an entry:
Find it: Main Menu > L Phonebook > Speed Dial 1 2 Scroll to an unassigned speed dial location entry and press Set. Scroll through the Select Contact list to the entry to be assigned the number and press D. 3 When prompted, select Yes to confirm your selection. To see an entrys speed dial number:
Find it: Main Menu > L Phonebook > Contact List As you scroll through entries, speed dial numbers are identified by the speed dial indicator >. To activate speed dialing, set One Touch Dial to On:
Find it: Main Menu > u Settings > Call > One Touch Dial To speed dial a number, enter the speed dial number for the entry you want to call and press J. one-touch dial To one-touch dial a speed dial number 1 through 9, press and hold the single-digit speed dial number (keys 1 through 9) for that entry. emergency calls Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Note: Emergency numbers vary by country. Your phones preprogrammed number(s) may not work in all calls 35 DRAFT locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues. 1 2 Enter the emergency number. Press J to call the emergency number. AGPS during an emergency call When you make an emergency call, your phone can use Assisted Global Positioning System
(AGPS) satellite signals to tell the emergency response center your approximate location. The AGPS feature has limitations, so always tell the emergency response center your best knowledge of your location. Remain on the phone for as long as the emergency response center instructs you. AGPS might not work for emergency calls:
36 calls
Your phones AGPS feature must be turned on
(see page 31).
Your local emergency response center might not process AGPS location information. For details, contact your local authorities. For best results:
Go outside and away from underground locations, covered vehicles, structures with metal or concrete roofs, tall buildings, and foliage. Indoor performance might improve if you move closer to windows, but some window sun shielding films can block satellite signals.
Move away from radios, entertainment equipment, and other electronic devices that might interfere with or block AGPS satellite signals. DRAFT If your phone cannot find strong AGPS satellite signals, the location of the nearest cell tower in contact with your phone is automatically provided to the emergency response center. attach number While dialing (with digits visible on the display), press Options, then scroll to and select Attach Number to attach a number from your Contact List or Recent Calls list. insert special characters While entering a number, press Options and select one of these options:
Insert Pause (p)Your phone pauses for two seconds before it dials the next digit.
Insert Wait (w)Your phone waits until the call connects, then prompts you for confirmation before it dials the next digit(s). international calls If your phone service includes international dialing, you can set your phone to automatically insert your local international access code:
Find it: Main Menu > u Settings > Call > Intl Dialing > Automatic When Intl Dialing is set to Automatic, insert your local international access code (indicated by +) by pressing and holding 0. Then, use the keypad to dial the country code and phone number. calls 37 DRAFT hearing aid You can set your phone for hearing aid compatibility:
Find it: Main Menu > u Settings > Call > Hearing Aid Note: For more information about hearing aid compatibility, see Hearing Aid Compatibility with Mobile Phones on page 97. in-call options During an active call, press Options to access these options:
Contacts Phone Info Bluetooth Menu BREW Recent Calls Message Center Datebook TTY Setup Note: When you have a Bluetooth device connected during a call, you may also see Audio to Phone and Disconnect Bluetooth options. When you have TTY Mode on, you may also see a TTY Setup option. call times Network connection time is the elapsed time from the moment you connect to your service providers network to the moment you end the call by pressing I. This time includes busy signals and ringing. The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider. For billing information, please contact your service provider directly. 38 calls DRAFT features minute beep Set your phone to beep every minute during a call:
Main Menu > u Settings > Sounds > Service Alerts
> Minute Beep view call times Main Menu > q Recent Calls > Timers Scroll to and view the times for Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls, Transmitted Data, Received Data, Total Data, Last Reset, Lifetime Calls, or Lifetime Data Counter. features reset call times or data volumes Main Menu > q Recent Calls > Timers To reset individual timers: Scroll to the timer you want to reset and press Reset. When prompted, select Yes to confirm that you want to reset the timer. To reset all timers: Press Reset All. When prompted, select Yes to confirm that you want to reset all timers. calls 39 DRAFT more calling features features DTMF Tones Your phone can send Dual Tone Multi Frequency
(DTMF) tones for calling card calls or other automated touch-tone calls. Set up DTMF tones:
Main Menu > u Settings > Call > DTMF Tones Select Short or Long. conference call During a call, dial the next number and press J, then press Jagain. 40 calls DRAFT text entry Some features require you to enter names, numbers, and other text, such as when you add a contact to your Contact List or when you write and send a message. Your phones full qwerty keypad makes text entry quick and easy:
While you enter text, an indicator at the top right of the screen shows the current entry mode. Flashing cursor shows where you are typing. Entry Mode Indicator 0/10 To:
Msg FN Options Add 0/160 Send See the next section for instructions on selecting an entry mode. text entry 41 DRAFT entry modes Multiple entry modes make it easy for you to enter information on text entry screens. iTAP & QWERTY modes To select an iTAP or QWERTY entry mode:
1 2 3 Press Options (the left soft key). Select Entry Mode. Select one of the following:
entry modes iTAP English Let the phone predict each English word as you press keys (see page 42). Note: Your phone may not contain all of the languages listed. iTAP software provides a predictive text entry method that combines your key presses into common words. When you enter three or more characters in a row, your phone may guess the rest of the word. For example, if you enter prog, you might see:
Press K right to accept program. Enter a space after prog to keep only prog. Msg iTAPEn To:
Alvin Miller This is a program Options Insert 29/160 Send iTAP Spanish QWERTY Let the phone predict each Spanish word as you press keys. If you want a different word (such as progress), continue pressing keys to enter the remaining letters. Enter letters and number, first character of a sentence in uppercase. If you enter a word your phone does not recognize, your phone stores the word to use as a future word 42 text entry DRAFT option. When you run out of phone memory for unrecognized words, your phone deletes the oldest word to add new words.
Press N twice to enter the upper symbols and numbers on the keys until you press N again or move the cursor to a different field. Press K up or down to view other possible combinations, and select the one you want. Press K right to enter the highlighted combination when it spells a word. A space is automatically inserted after the word. Press 1 to enter punctuation or other characters. function key mode Press the function key N to switch to FN mode:
Press N once to enter the upper symbol or number on the next key pressed (such as !), then return to the previous entry mode. Press to enter upper character on key. special keys Several special keys let you modify text or change entry options:
Press to delete last character. Press to enter a line break. Press with function key to select symbol mode. Press to change capitalization text entry 43 DRAFT entry mode indicator description QWERTY Abc first character of a sentence in uppercase abc ABC all lowercase letters all uppercase letters Note: When you enter a phone number from the home screen, your phone automatically uses FN mode for keys with numbers and for the * and # keys. capitalization options Press s in any text entry screen to toggle between these capitalization options:
entry mode iTAP English iTAP Spanish indicator description iTAPEn iTAPEN iTAPen iTAPEs iTAPES iTAPes first letter of sentence in uppercase (English) all uppercase letters (English) all lowercase letters (English) first letter of sentence in uppercase (Spanish) all uppercase letters (Spanish) all lowercase letters (Spanish) 44 text entry DRAFT messages send a multimedia message A multimedia message (MMS) contains embedded media objects, such as photos, pictures, animations, sounds, and voice records. You can also insert a Vcard for a contact or a calendar event. You can send a multimedia message to other wireless phones with multimedia messaging capabilities and to email addresses. create & send message 1 From the home screen, press v, then scroll to Create Message and press D. Tip: You can also go to Create Message by pressing Main Menu > Messaging > Create Message. Press the function key to switch the entry mode. Highlighted Entry Area Press Options to view Options menu. 0/10 To:
Msg FN Options Add 0/160 Send Press Add to select recipient from the Phonebook or recent calls lists. messages 45 DRAFT 2 Enter a phone number or email address. Press D to select Add. On the Add Recipients screen, select Contacts, Recent Calls, or Groups. Press to mark each entry you want to include as a message recipient, and press Done when finished. 3 Scroll down to the text entry area and enter message text. To insert a prewritten message, press D to select Insert, then scroll to Quick Text and press D. Scroll to the quick text you want to insert and press D. 4 5 To insert a Vcard for a contact in your Phonebook, press D to select Insert, then scroll to Contact Info and press D. Scroll to the desired entry and press D. To insert an event from your phones Calendar, press D to select Insert, then scroll to Calendar Event and press D. Scroll to the desired event and press D. To insert a message subject, set message priority, or set delivery options, press Options (see page 47). Press Send to send the message. To insert a sound, press D to select Insert, then scroll to Audio and press D. Scroll to the desired sound and press D. When you press Options from the Msg message entry screen, you see the messaging Options menu, which can include the following:
To insert a stored picture or video clip, press D to select Insert, then scroll to Pictures or Video and press D. Scroll to the desired object and press D. 46 messages DRAFT Note: The options you see depend on the type of message you are sending and the type of object you insert into the message. options Delivery options Entry Mode Save to Draft Insert Subject Insert Object Add Recipients Specify the entry mode to use
(see page 42). Save the message, without sending it, in the Drafts folder. Enter the message subject. Insert quick text, picture, video, sound, vcard, or calendar event. Enter message recipients from the Phonebook or recent calls lists. Priority Set to Normal or High. Delete Object Cancel Message Select Deferred Delivery to schedule the message to be sent at a later time. Select Delivery report if you want to receive a report on whether or not the message was sent successfully. Delete an object you inserted into the message. Cancel delivery of the message and exit with or without saving the message to the Drafts folder. messages 47 DRAFT receive a message When you receive a message, your phone plays an alert and displays the < (new message) indicator and a New Message notification. Select View Now to read the message immediately, or select View Later to save it in your Inbox for viewing later. To read messages in your Inbox:
Press Options to view and select from these options:
Reply with Copy, Forward, Lock/Unlock, Save To Contact, Start Slide Show, Save Object, Message Details, Delete Message, Delete Multiple, Delete All, Sort By, Save Quick Text, Create Message. Note: The options you see depend on the type of message you receive and whether the message contains multimedia objects. Press to return to the message Inbox. 1 2 3 4 From the home screen, press v, then scroll to Inbox and press D. Multimedia messages can contain different media objects:
Tip: You can also go to Inbox by pressing Main Menu > Messaging > Inbox. Scroll to the message you want to read. Press D to open the message. Your phone displays the media object, then the message. Press Reply if you want to respond to the message.
Photos, pictures, and animations are displayed when you read the message.
A sound file begins playing when the message text is displayed. Use the volume keys to adjust the volume.
If the message includes an attached file, select the file indicator or filename and press VIEW (for an image file), PLAY (for a sound file), or OPEN (for 48 messages DRAFT an object such as a Phonebook or calendar entry or an unknown file type). conversations If you get a lot of messages from many different senders, you need a way to keep track of all of these messages and your responses. Conversations organizes your messages into conversation strings that you can follow quickly and easily. 1 From the home screen, scroll to g Conversations and press D. Tip: You can also go to Conversations by pressing v and selecting Conversations, or by pressing Main Menu > Messaging > Conversations. Your phone shows a list of contacts and/or numbers who have sent you messages. The list is ordered by how recently you received messages from the senders. The most recent message sender appears at the top of the list. 2 Scroll to the message sender you want. Conversations Nick 10/15/08 What Time Is the Meeting? 8:15 AM Liz 10/14/08 Martin Jameson Jason Ken Options When a message sender is highlighted, you see the date, time, and subject of the last message you received from the sender. Press Options to view these options: Reply, Delete Conversation, Delete All Conversations, Save to Contacts, Go to Messaging. 3 Press Dto select the highlighted sender. messages 49 DRAFT You see a partial view of the last message you received from the sender. Above that is a partial view of the previous message. Scroll up to see earlier messages. Press the center key D to open a highlighted message. Previous Message Most Recent Message in Conversation
Nick (5) Me 4:33 PM 10/14/08 Are you coming to the mtg? We will discuss Nick 8:15 AM 10/15/08 What time is the meeting? I have to finish this design and then run it down to the shop first, then stop by ... Options Press Options to open the Options menu. Scroll down to this area to enter a message reply. 4 Press K to scroll back to earlier messages. Press D to open and view a highlighted message. 50 messages Scroll down to the entry area at the bottom of the screen to enter a reply. Press Send to send the reply. Press Options to view and select: Reply, Lock/Unlock, Save to Contacts, Message Details, Delete Message, Call, Go to Messaging. 5 Press I to return to the home screen. mobile Google SMSTM messaging service With Google SMS mobile messaging service, you can send a text message with your search query to Google. Google will then send a text message to your phone with the results of your query. You can inquire about local movie listings, driving directions, weather, stock quotes, translations, currency conversion, sports scores, and more. 1 From the home screen, press v, then scroll to Google SMS and press D. DRAFT Tip: You can also go to Google SMS by pressing Main Menu > Messaging > Google SMS. 3 Enter your email user name and password, and press D. 2 Enter your search term and send it to Google. email You can send and receive email messages with (such as GmailTM or AOL or with another account that you set up. set up personal email with automatic settings Most of the settings for Gmail and AOL email accounts are already configured for you on your phone. After you know your email user names and passwords for these accounts:
1 2 From the home screen, select P E-mail. Scroll to and select G-mail or AOL Mail. Your phone connects to the appropriate email server. 4 Press I to return to the home screen. set up personal email manually If you want to use an email provider other than the ones already set up on your phone, you must manually enter the following:
account type (POP3 or IMAP4) the incoming server address, and whether the server requires an SSL connection the outgoing server address, and whether the outgoing server requires authentication for a small number of POP3 and IMAP4 email providers, a domain name messages 51 DRAFT 1 2 3 4 5 From the home screen, select P E-mail. Scroll to and select Other. send email 1 From the home screen, select P E-mail. Complete the Username, Password, Email Address, and the incoming server information, and press Next. Enter the outgoing server information, and press Done to complete the setup and check your email. Press I to return to the home screen. 2 3 4 Scroll to and select an email account. Log into your email account by entering your user name and password. Select and New, then type and send an email message just like on your PC. read email When you receive a new email message, your phone plays an alert and shows V. 1 2 3 4 From the home screen, select P E-mail. Scroll to and select an email account. Log into your email account by entering your user name and password. Select and read the email messages you want. 52 messages voicemail Your network stores the voicemail messages you receive. To listen to your messages, call your voicemail number. Note: Your service provider may give you additional information about using voicemail. When you receive a voicemail message, your phone shows the voicemail message indicator w and New Voicemail. Press Call to listen to the message. DRAFT To check voicemail messages later:
1 From the home screen, scroll to Voicemail and press D. Tip: You can also press v and select Voicemail, or press Main Menu > Messaging > Voicemail. 2 Press J to call your voicemail number. Your phone may prompt you to store your voicemail phone number. If you dont know your voicemail number, contact your service provider. more messaging features features send text message Main Menu > Messaging > Create Message Press Options to perform other actions on the message. create quick text Enter and store Quick Text (prewritten) messages that you can select and send later. Main Menu > Messaging Press Options. then scroll to Quick Text and press D. Press Options, then select New. messages 53 DRAFT features send quick text Main Menu > Messaging Press Options. then scroll to Quick Text and press D. Scroll to the quick text message you want to send and press Send. set up messaging Main Menu > Messaging Press Options. Select Auto Cleanup to erase messages automatically. Select Voicemail # to enter the number to call for your voicemail messages. Select Callback #
to insert a callback number automatically into messages that you send. Select Signature to create a signature line that is inserted automatically at the end of messages that you send. Select Auto Receive to set whether received messages are automatically downloaded to your phone. 54 messages features view sent message Main Menu > Messaging > Outbox Scroll to the message you want to view and press D. Press Options to access the following options: Resend, Forward, Lock, Save to Contact, Message Details, Delete Message, Delete Multiple, Delete All, Sort By, or Create Message. delete messages Delete all messages or only messages from the Outbox or Drafts folder:
Main Menu > Messaging Press Options, then scroll to and select Delete. Select Inbox, Drafts, Outbox, or All. To delete Inbox or Outbox messages automatically, press Options, then select Auto Cleanup. DRAFT features drafts Main Menu > Messaging > Drafts To complete and send a saved draft message, scroll to the message and press D. or To view and select other options, press Options to access the following: Send, Edit, Lock, Save to Contact, Delete, or Create Message. Note: The options you see depend on your service provider. store message objects Go to a multimedia message slide, or highlight an object in a letter, then press Options and select Save Object. messages 55 DRAFT entertainment XM Radio Mobile XM Radio Mobile gives you access to twenty-five of XM Radios top satellite channels right from your mobile phone. Find it: Main Menu > Multimedia > Music & Sounds > XM Radio When XM Radio Mobile is activated, scroll left or right to the station you want, and press D to select it. Note: Your service provider may give you additional information about using XM Radio Mobile on your phone. Mobile GoogleTM Stay connected on the go with Google Search, Maps, YouTubeTM, News, Blogger, and many other popular Google products. To use Google Mobile:
Find it: Main Menu > E Alltel Web > Google When you connect to Google, select the Google product you want to use. Note: Normal airtime connection charges apply. 56 entertainment DRAFT myspace mobileTM MySpace Mobile allows you to:
view and send messages read and send bulletins add friend comments read and post blogs approve friend requests view friend profiles view photos and more Youll need a MySpace account to use MySpace Mobile. If you already have an existing account, you can log in right away. If not, sign up by going to http://www.myspace.com and clicking on the Sign Up tab. To use MySpace Mobile:
Find it: Main Menu > E Alltel Web > Google When you connect to Google, select the Google product you want to use. Note: Normal airtime connection charges apply. camera/camcorder take photos The camera lens is on the back of the phone. To get the sharpest photos, wipe the lens clean with a dry cloth before you take a photo. With the phone powered on:
1 Press the camera/camcorder key w. 2 With Camera highlighted, press D. Tip: You can also activate your phones camera by pressing Main Menu > j Multimedia > Camera. entertainment 57 DRAFT Your phone shows the active camera viewfinder screen:
4 5 Remaining Shots Resolution 455 1600x1200 Press K right
& left to zoom in & out. Options Capture Pictures Press left soft key to view Options menu. Press D to take photo. Press D to take the photo. Press Send to send the photo in a message, to an online album (if Online Album Reminder is Onsee page 59), or to another device via a Bluetooth connection (see page 82). Press D (Save) to save the photo and return to the active viewfinder. Press Delete to delete the photo and return to the active photo viewfinder. 6 Press O to return to the main screen. When the camera is active, press Options to view and select these options:
Tip: Press the camera/camcorder key w to toggle between the camera and camcorder. option Resolution 3 Point the camera lens at the subject. Press K right and left to zoom in and out. To view other options, press Options (see page 58). 58 entertainment Set resolution to 1600x1200, 1280x960, 640x480, 320x240, or Picture ID. DRAFT option Self Timer Add Picture Frame Brightness White Balance Color Effects Set the camera to take a photo after a specific interval: 3 seconds, 5 seconds, or 10 seconds. Or turn it off. Select a custom frame for your photo. Adjust image brightness by scrolling left or right from -2 to 2. Adjust for different lighting conditions by scrolling left or right to choose from Auto, Sunny, Cloudy, Tungsten, Fluorescent, or Darkness. Scroll left or right to select Normal, Antique, Black & White, or Negative. option Online Album Reminder Shutter Tone Storage Location Set whether your phone to asks if you want to send photos to an online photo album (availability is network/subscription dependent). Activate a sound that plays when you take a photo: Shutter, Silent, Quack, Boing, or Apple Bite. Specify where you want to save photos (Phone or Memory Card). This option is available only if you have a memory card inserted. Tip: You can skip the Options menu and quickly adjust camera settings. Just press K up and down to scroll to Color Effects, White Balance, or Brightness, then press K left and right to scroll through the settings for that option. entertainment 59 DRAFT record videos 1 Press and hold the camera/camcorder key w to activate the camera. Tip: You can also activate your phones camcorder by pressing Main Menu j Multimedia > Camcorder. Your phone shows the active camcorder viewfinder screen:
Camera Mode
(Photo or Video) Recording Time REC 00:00:00 176x144 Options Rec Videos Press left soft key to view Options menu. Press D to take photo. 60 entertainment Tip: Press the camera/camcorder key w to toggle between the camera and camcorder. 2 Point the camera lens at the subject. Press K right and left to zoom in and out. To view other options, press Options (see the table following these steps). 3 4 5 Press D to begin video recording. Press Stop to stop video recording. Press Send to send the video clip in a message, to an online album (if Online Album Reminder is Onsee page 59), or to another device via a Bluetooth connection (see page 82). Press D (Save) to save the video clip and return to the active viewfinder. Press Delete to delete the video clip and return to the active viewfinder. 6 Press I to return to the main screen. DRAFT When the camcorder viewfinder is active, press Options to set video recording options:
option Resolution Video Length Self Timer Brightness Set resolution to Large (320 x 240) or Small (176 x 144). Set the maximum length of video clips to 2 Minutes, 5 Minutes, Fit to Memory, or Fit to MMS. Tip: To send your video clip in a multimedia message, the video length must be set to Fit to MMS. Set the camcorder to begin recording after a specific interval: 3 seconds, 5 seconds, or 10 seconds. Or turn it off. Adjust image brightness by scrolling left or right from -2 to 2. option White Balance Color Effects Adjust for different lighting conditions by scrolling left or right to choose from Auto, Sunny, Cloudy, Tungsten, Fluorescent, or Darkness. Scroll left or right to select Normal, Antique, Black & White, or Negative. Online Album Reminder Set whether your phone Storage Location to asks if you want to send photos to an online photo album. Specify where you want to save video clips (Phone or Memory Card). This option is available only if you have a memory card inserted. entertainment 61 DRAFT view pictures Find it: Main Menu > j Multimedia > Pictures 1 Scroll left and right to view pictures. While viewing pictures, press Options from the playback screen to access these options:
Note: You may not see all of the options listed below, depending on your service provider. Press Options to open the Options menu (see the table following these steps). Press Edit to access editing tools that you can use to modify the selected picture. If you see Slideshow at the bottom middle of the screen, press D to see a slideshow presentation of all pictures, shown in sequence. Press D to pause the slideshow. Press Settings to modify slideshow settings. Press to end the slideshow and return to the picture viewer screen. If you see Ok at the bottom middle of the screen and the message Buy Wallpaper, press D to purchase and download pictures. options Send To OnLine Album Capture Rename Send the selected picture in a multimedia message (see page 45) or to another device via a Bluetooth connection (see page 82). Send the picture to an online picture album (availability is network/subscription dependent). Open the active camera viewfinder screen. Change the name of the selected picture. 2 Press to return to the Multimedia menu. 62 entertainment DRAFT options Move Print Delete Delete All Mark Move the selected picture from phone memory to an installed memory card, or from memory card to phone memory (see page 23). options Mark All Mark all pictures. After you mark all pictures, press Options to see these options: Unmark, Mark All, Unmark All, Move Marked, Delete Marked, Lock Marked, Unlock Marked. Use a Bluetooth connection with a printer to print the selected picture. File Info See detailed information about the selected picture. Delete the selected picture (if it is not locked (see Mark and Mark All below). Delete all unlocked pictures (see Mark and Mark All below). Mark the selected picture. After you mark one or more pictures, press Options to see these options: Unmark, Mark All, Unmark All, Move Marked, Delete Marked, Lock Marked, Unlock Marked. play videos To play video clips that you have recorded or received in multimedia messages:
Find it: Main Menu > j Multimedia > Videos entertainment 63 DRAFT Your phone shows the video clip playback screen:
2 Press D to play a highlighted video clip. 0811081219a.3g2 5/5 0811081219a 5/5 Options Play Record Press left soft key to view Options menu. Press D to play selected video clip. 1 Scroll left or right to highlight a video clip. Press Options to open the Options menu (see the table following these steps). 00:01 Options 00:05 Mute Press left soft key to freeze video clip at current frame
& open the Options menu. Press right soft key to mute &
unmute video clip sound. Use these keys to control video playback:
video playback controls pause/play Press D. fast forward Press & hold K right. 64 entertainment DRAFT video playback controls next video clip rewind previous video clip Press K right. Press & hold K left). Within first two seconds of video clip playback, press K left. restart video clip After first two seconds of video clip playback, press K left. Press K down. switch portrait &
landscape orientation During video clip playback, press Options to view these options: Extract Current Frame, Videos, File Info. 3 When the video clip is finished playing, press to return to the playback screen. When a video clip is not playing, press Options from the playback screen to access these options:
options Send To OnLine Album Rename Move Send the selected clip in a multimedia message (see page 45) or to another device via a Bluetooth connection (see page 82). Send the video clip to an online album (availability is network/subscription dependent). Change the name of the selected video clip. Move the selected video clip from phone memory to memory card, or from memory card to phone memory (see page 23). Delete Delete the selected video clip. entertainment 65 DRAFT options Delete All Delete all unlocked video clips. manage sounds You can record sounds for later playback. Trim Mark Mark All Edit the length of the video clip. Mark the selected clip. After you mark one or more clips, press Options to see these options: Unmark, Mark All, Unmark All, Move Marked, Delete Marked, Lock Marked, Unlock Marked. Mark all video clips. After you mark all clips, press Options to see these options:
Unmark, Mark All, Unmark All, Move Marked, Delete Marked, Lock Marked, Unlock Marked File Info See detailed information about the selected video clip. Note: Your phones options may vary. Most options apply only to user-recorded videos, and are not available for pre-installed videos. 66 entertainment create a sound 1 Press and hold the voice record/speakerphone key u (see page 2). Tip: You can also press Main Menu > j Multimedia
> Music & Sounds > Sounds > Record New. 2 3 Press D (Start) to begin recording. Press D again to stop recording. play a sound Find it: Main Menu > j Multimedia > Music & Sounds > Sounds Scroll to the sound title and press D. Press Options to open a menu that can include these options: Send, Rename, Move, Lock, Delete, Delete All, Mark, Mark All, File Info. DRAFT browser Use your phones browser to surf to your favorite Web sites, upload videos to a video blog, and download files and applications to your phone. Log onto your Internet-based email account to check your email on the go. To launch the browser, from the home screen, press t. entertainment 67 DRAFT tools voice recognition Your phones voice recognition feature lets you make calls and complete other actions by speaking commands to your phone. voice recognition tips
Say the names of Contact List entries exactly as listed. For example, to call the mobile number for an entry named Bill Smith, say Call Bill Smith mobile. (If the entry includes only one number for Bill Smith, say Call Bill Smith.)
Speak numbers at a normal speed and volume, and pronounce each digit distinctly. Avoid pausing between digits. 68 toolsvoice recognition
You can set your phone to play voice command instructions through the speakerphone by pressing the voice key, which opens the Voice Commands menu. If you use the Call command to place a call, the audio plays through the phones earpiece when the call connects. You can turn this feature off (see page 72). voice commands 1 Press and release the voice key on the right side of the phone. Your phone says Please say a command and shows a list of voice commands. DRAFT 2 Say one of the following commands:
feature Call <Name or #>
Place a call to:
a Contact List entry whose name you speak a phone number you speak your voicemail number the last number you called For example, you could say Call Bill Smith mobile, Call 8475551212, Call voicemail, or Call last number. feature Send Msg <Name or #>
Send a message to:
a Contact List entry whose name you speak a phone number you speak all the members of a Group whose name you speak For example, when prompted to say a command, you could say Send message to Bill Smith mobile, Send message to 8475551212, or Send message to Family. Your phone would open the Msg entry screen, with Bill Smiths mobile number, the number 8475551212, or the group named Family in the To field. For instructions on sending a message, see pages 45. toolsvoice recognition 69 DRAFT feature Go To <Shortcut>
feature Contact <Name>
Go to the menu or perform the action you specify:
Contacts, Recent Calls, Messaging, Settings, Music Player, or Redial. Note: If you dont have any content (music, recent calls, and so on), the phone returns to the home screen. Check <Item>
View the item on the screen that you say aloud:
Status, Voicemail, Messages, Missed Calls, Time, Signal Strength, Battery, or Volume. Look up an entry from the Contact List by saying the contacts name. Play <Playlist>
Play a playlist with the music player by saying the name of one of your playlists. Note: If you dont have any music, the phone returns to the home screen. Help See help information for the voice recognition feature. 70 toolsvoice recognition DRAFT voice recognition settings To modify voice recognition settings:
1 2 3 Press and release the voice key on the right side of the phone. Press Settings. Scroll to the desired option and press D. voice recognition settings Digit Dial Readout voice recognition settings Confirmation If your phone is not sure that it has correctly identified a name or number that you speak, it can display up to three choices and prompt you to confirm the correct one. You can control when choice lists appear:
AutomaticDisplay a list of choices from multiple alternatives. Set your phone to say numbers aloud as you press them on the keypad. Always ConfirmAlways display a list of choices when there are multiple alternatives. Never ConfirmNever display a choice list. The phone chooses from the best alternatives. toolsvoice recognition 71 DRAFT voice recognition settings voice recognition settings Sensitivity Prompts ModeSet whether your phone says Prompts, Readout (to read every word on the screen), or Tones Only. Audio PlaybackSet how you want to hear prompts:
Automatic detection, Speakerphone, or through your Earpiece. Call Alert For an incoming call, set whether you hear a Ring Only, Caller ID + Ring, or Name Repeat (repeat the name until you answer or the call goes to voicemail). To access in-device help for a setting you speak, press Info. You can fine tune your phones ability to recognize voice commands. Select Most Sensitive, Recommended, or Least Sensitive. If sensitivity is too strict, your phone often rejects voice commands and displays Please repeat ... or No match found. Select Most Sensitive. If sensitivity is too forgiving, you experience false activations (indicating that the phone detects a wrong match). Select Least Sensitive. Adaptation Follow the prompts on your screen to improve recognition of spoken words. Adaptation takes about sixty seconds and requires you to be in a quiet place (no background noise). 72 toolsvoice recognition DRAFT phonebook create entry For information on creating a new entry, see your Quick Start Guide. view entry Find it: Main Menu > L Phonebook > Contact List To view details for an entry, scroll to the entry and press D. For other options, scroll to the entry and press Options. call entry Find it: Main Menu > L Phonebook > Contact List Scroll to the entry you want to call and press J. edit entry To modify or delete an entry:
Find it: Main Menu > L Phonebook > Contact List Scroll to the entry and press Options, then scroll to the option you want and press D. ringer IDs When you assign a ringtone to an entry, your phone plays that ringtone when you receive a call from that entry. Find it: Main Menu > L Phonebook 1 2 Scroll to the entry and press Options, then select Edit Contact. Scroll to Ringer ID and press D. toolsphonebook 73 DRAFT 3 Scroll to the desired ringtone. Note: As you scroll through settings, your phone plays a sample of each setting you highlight. 4 Press D to select the highlighted ringtone. picture IDs Assign a photo or picture to show when you receive a call from an entry:
Find it: Main Menu > L Phonebook > Contact List 1 2 3 Scroll to the entry and press Options, then select Edit Contact. Scroll to Picture and press D. Scroll left or right to the desired picture and press D. set default number Set the primary number for an entry with multiple numbers. This will be the number your phone shows when listing Contact List entries. Find it: Main Menu > L Phonebook > Contact List 1 2 Scroll to the entry and press Options, then select Edit Contact. Scroll to the number to be set as the default number and press Options, then select Set as Default. sort entries Set whether Contact List entries are listed in alphabetical order by first or last name:
Find it: Main Menu > L Phonebook > Contact List Press Options and select Capture to take a new photo
(see your Quick Start Guide) to use as a picture ID. 1 2 Press Options, then select Sort Name. Scroll to First Name or Last Name and press D. 74 toolsphonebook DRAFT groups To send a text message to many people at once, you can add Contact List entries to Groups. Then, when you enter a groups name as a message recipient, the message is sent to all members of that group. Your Phonebook comes with several groups already, and you can create your own additional groups. 3 When you finish selecting entries, press Done to save your selections. To create a new group:
Find it: Main Menu > L Phonebook > Groups 1 2 Press New. Enter the new group name and press Save. To add entries to a group:
Find it: Main Menu > L Phonebook > Groups 1 2 Scroll to the group name and press Options, then select Add Contacts. Scroll to each entry you want to add to the group and press D. A check mark appears in the box beside an entry when you select it. To deselect an entry, scroll to the entry and press D to remove the check mark. network features network settings View network information and adjust network settings:
Main Menu > u Settings > Phone > Network Selection Scroll to the desired network setting and press D. toolsnetwork 75 DRAFT features call connect tones Set phone to play a tone when a call connects:
Main Menu > u Settings > Sounds > Service Alerts > Call Connect call drop tone Set phone to play an alert tone whenever the network drops a call. (Because digital networks are so quiet, a call drop alert may be your only indication that a call was dropped.) Main Menu > u Settings > Sounds > Service Alerts
> Voice Call Drop personal organizer features add datebook event Main Menu > Tools > Datebook Scroll to the desired day and press Add, then enter event information and press Done. view datebook event View or edit event details:
Main Menu > Tools > Datebook Scroll to the desired day and press D, then scroll to the event and press D. To edit the event, press Edit. 76 toolspersonal organizer DRAFT features event reminder features view world clock Press View to view an event reminder. To view the current time in cities around the world:
Press Exit to dismiss an event reminder. Main Menu > Tools > World Clock set alarm Main Menu > Tools > Alarm Clock Select Alarm 1, Alarm 2, or Alarm 3, then turn on the alarm, specify the alarm time, recurrence, and alert type. turn off alarm To turn off an alarm, press Off or I. calculator Main Menu > Tools > Calculator Scroll left or right to see the time in a desired city. Or, press Cities, then scroll to a city and press D. Press Set DST to set Daylight Savings Time for a city. notepad Your phone stores the most recent digits you entered in the Notepad. These digits can be a number that you called or a number that you entered and want to save for later. You can also create notes with information that you want to save for later. Main Menu > Tools > Notepad Your phone shows a list of notes. To view the contents of a note, scroll to the note and press D. To create a new note, press New. toolspersonal organizer 77 DRAFT connections cable connections Your phone has a micro USB port that allows you to connect it to a computer. Note: Motorola OriginalTM data cables and supporting software are sold separately. Check your computer to determine the type of cable you need. If you use a USB cable connection:
Make sure both your phone and the computer are turned on. 78 connectionscable connections
Make sure to connect the phone to a high-power USB port on your computer (not a low-power one such as the USB port on your keyboard or bus-powered USB hub). Typically, USB high-power ports are located directly on your computer. Note: If you connect your phone to a low-power USB port, the computer may not recognize your phone. Specify the correct USB setting on your phone:
Find it: Main Menu > u Settings > USB Scroll to Modem/COM and press D. DRAFT Bluetooth connections Your phone supports Bluetooth wireless connections. You can connect your phone to a Bluetooth headset or car kit, or connect to another device to transfer files. To view a list of Bluetooth profiles supported by your phone:
Find it: Main Menu > u Settings > Bluetooth 1 2 Press Options, then scroll to Supported Profiles and press D. To see more information about a profile, scroll to the profile name and press D. For more Bluetooth wireless connections support information, go to www.motorola.com/Bluetoothsupport. Note: All multimedia (video player, audio player, shutter tones) will play from the speakerphone when your phone is connected to another Bluetooth device. For maximum Bluetooth security, always connect Bluetooth devices in a safe, private environment, away from other devices with Bluetooth connection capabilities. turn Bluetooth power on/off Set Bluetooth power to be on whenever your phone is on. Find it: Main Menu > u Settings > Bluetooth Press Turn On (the right soft key). Note: To extend battery life when you are not actively using a Bluetooth connection, turn Bluetooth power off by using this procedure and pressing Turn Off. If you turn off Bluetooth power, your phone will not connect to other Bluetooth devices until you turn on Bluetooth power and then reconnect. connectionsBluetooth connections 79 DRAFT place phone in discovery mode Allow an unknown Bluetooth device to discover your phone:
Find it: Main Menu > u Settings > Bluetooth 1 2 3 Press Options. Scroll to Discovery Mode and press D. Scroll to On and press D. The following message appears: Discovery on: For one minute other devices can find you. If the device requests permission to bond with your phone, press YES and enter the device PIN code to create a secure connection with the device. (The PIN code is typically set to 0000.) Note: See the instructions that came with your device for the devices PIN code and other information about the device. 80 connectionsBluetooth connections pair with headset, handsfree device, or computer Note: If you want to use your Motorola Bluetooth headset with both an audio device and your phone, use your phones Bluetooth menus to connect the phone with the headset. If you establish the connection by pressing a button on the headset, or if you allow the headset to connect automatically by turning it on, you may experience unexpected results. Before you try to connect to another Bluetooth device, make sure your phones Bluetooth power is On and the device is in pairing or bonding mode (see the user guide for the device you are attempting to pair with). You can connect your phone with only one device at a time. Find it: Main Menu > u Settings > Bluetooth DRAFT 1 Press D to select Add New Device. Note: If your Bluetooth power is not turned on, your phone will prompt you to turn it on. 2 When you see Place the device you are connecting to in discoverable mode, press D. Your phone lists the devices it finds within its range. If your phone is already connected to a device, your phone lists that device and identifies it with a % (in-use indicator). 3 4 Scroll to a device in the list and press Pair to connect to the device. If the device requests permission to bond with your phone, press YES and enter the device PIN code to create a secure connection with the device. (The PIN code is typically set to 0000.) Note: See the instructions that came with your device for the devices PIN code and other information about the device. When the connection is made, the (Bluetooth) indicator or a Bluetooth message displays in the home screen. connect to handsfree device during a call 1 During a call, press Options, then select Connect Bluetooth. 2 3 Scroll to Add New Device, or select the name of a device if you have paired with it previously, and press D. If connecting to a new device, place the new device in discoverable mode and press D on your phone. 4 When your phone finds the device, press Pair. 5 If prompted, enter the default PIN code 0000. Note: You cant switch to a headset or car kit if you are already connected to a Bluetooth device. connectionsBluetooth connections 81 DRAFT copy files to another device You can use a Bluetooth connection to transfer a contact or file to another Bluetooth device. To transfer a contact:
Note: Make sure the device receiving the entry has Bluetooth power on and is in discoverable mode. Find it: Main Menu > L Phonebook > Contact List 6 7 Scroll to Add New Device, or scroll to the device that you want, and press v. Note: If your phone does not already have Bluetooth power turned on, it prompts you to turn it on. If connecting to a new device, place the new device in discoverable mode and press D on your phone. 1 2 3 4 5 Scroll to the entry you want to transfer and press Options. 8 When the phone shows the list of devices, scroll to the device you want and press OK. Scroll to Send Contact Info and press D. Press D to select via Bluetooth. To add more entries, scroll to each entry and press D. Press Done, then press Send. 9 If prompted, enter the default PIN code 0000. When the connection is made, the receiving device is prompted to accept the transfer. When the receiving device accepts, the your phone transfers the entry to the device. To transfer a file to another device:
Note: Make sure the device receiving the file has Bluetooth power on and is in discoverable mode. The 82 connectionsBluetooth connections DRAFT receiving phone must be capable of receiving the file type. 1 On your phone, select the file (such as a picture, video, or sound) you want to transfer and press Options. 2 3 4 5 Press D to select Send. Scroll to via Bluetooth and press D. Scroll to Add New Device, or scroll to the device that you want, and press D. Note: If your phone does not already have Bluetooth power turned on, it prompts you to turn it on. If connecting to a new device, place the new device in discoverable mode and press D on your phone. 6 When the phone shows the list of devices, scroll to the device you want and press OK. 7 If prompted, enter the default PIN code 0000. 8 When your phone prompts you to confirm that you want to send the file, press Yes. When the connection is made, the receiving device is prompted to accept the transfer. When the receiving device accepts, the your phone transfers the entry to the device. receive files from another device Note: If you do not see the Bluetooth indicator O at the top of your phones display, turn on your phones Bluetooth power (see page 79). 1 2 Pair your phone with the other device (see page 80). Send the file from the other device. (If necessary, refer to the users manual for the device for instructions.) connectionsBluetooth connections 83 DRAFT 3 When prompted to accept the sent object, scroll to Yes and press D. Your phone notifies you when the transfer is complete. If necessary, press Save to save the file. disconnect from a device To disconnect from a device while the phone is idle:
Find it: Main Menu > u Settings > Bluetooth 1 Scroll to the name of the device from which you want to disconnect and press Options. 2 When your phone prompts Disconnect from devicename?, scroll to Yes and press D. To disconnect from a device during an active call:
1 2 Press Options. Scroll to Disconnect Bluetooth and press D. 84 connectionsBluetooth connections DRAFT service & repairs If you have questions or need assistance, we're here to help. Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-331-6456 (United States), 1-888-390-6456
(TTY/TDD United States for hearing impaired), or 1-800-461-4575 (Canada). service & repairs 85 DRAFT Specific Absorption Rate Data SAR DataThis model wireless phone meets the governments requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. 86 SAR Data Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is xxx W/kg, and when worn on the body, as described in this user guide, is xxx W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:
http://www.phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site:
http://www.cwta.ca 1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard DRAFT incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. 2. SAR Data 87 DRAFT 88 SAR Data DRAFT Important Safety and Legal Information 89 DRAFT Safety Information Safety and General Information This section contains important information on the safe and efficient operation of your mobile device. Read this information before using your mobile device. Exposure to Radio Frequency (RF) Energy Your mobile device contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your mobile device, the system handling your call controls the power level at which your mobile device transmits. Your Motorola mobile device is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy. Operational Precautions For optimal mobile device performance, and to be sure that human exposure to RF energy does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions. Product Operation When placing or receiving a phone call, hold your mobile device just like you would a landline phone. If you wear the mobile device on your body, always place the mobile device in a Motorola-supplied or approved clip, holder, holster, case, or body harness. If you do not use a body-worn accessory supplied or 90 Safety Information approved by Motorola, keep the mobile device and its antenna at least 2.5 centimeters (1 inch) from your body when transmitting. Using accessories not supplied or approved by Motorola may cause your mobile device to exceed RF energy exposure guidelines. For a list of Motorola-supplied or approved accessories, visit our Web site at:
www.motorola.com. RF Energy Interference/Compatibility Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices. Follow Instructions to Avoid Interference Problems Turn off your mobile device in any location where posted notices instruct you to do so. In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight. Implantable Medical Devices If you have an implantable medical device, such as a pacemaker or defibrillator, consult your physician before using this mobile device. Persons with implantable medical devices should observe the following precautions:
DRAFT ALWAYS keep the mobile device more than 20 centimeters
(8 inches) from the implantable medical device when the mobile device is turned ON.
DO NOT carry the mobile device in the breast pocket.
Use the ear opposite the implantable medical device to
minimize the potential for interference. Turn OFF the mobile device immediately if you have any reason to suspect that interference is taking place. Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your mobile device with your implantable medical device, consult your healthcare provider. Driving Precautions The use of wireless phones while driving may cause distraction. Discontinue a call if you cant concentrate on driving. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. Responsible driving practices can be found in the Smart Practices While Driving section in this guide (or separate guide). Operational Warnings Obey all posted signs when using mobile devices in public areas. Potentially Explosive Atmospheres Areas with potentially explosive atmospheres are often, but not always, posted and can include fueling areas, such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain dust, or metal powders. When you are in such an area, turn off your mobile device, and do not remove, install, or charge batteries. In such areas, sparks can occur and cause an explosion or fire. Symbol Key Your battery, charger, or mobile device may contain symbols, defined as follows:
Symbol 032374o Definition Important safety information follows. 032376o 032375o Do not dispose of your battery or mobile device in a fire. Your battery or mobile device may require recycling in accordance with local laws. Contact your local regulatory authorities for more information. Do not throw your battery or mobile device in the trash. Safety Information 91 DRAFT Symbol Definition Do not let your battery, charger, or mobile device get wet. Listening at full volume to music or voice through a headset may damage your hearing. Batteries & Chargers Caution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the battery use & safety section in the users guide. Keep Your Mobile Device and Its Accessories Away From Small Children These products are not toys and may be hazardous to children. For example:
A choking hazard may exist for small, detachable parts.
Improper use could result in loud sounds, possibly causing hearing injury. Improperly handled batteries could overheat and cause a burn.
Glass Parts Some parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a 92 Safety Information hearing:
substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center. Seizures/Blackouts Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your mobile device. Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are tired. Caution About High Volume Usage Warning: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected. To protect your Limit the amount of time you use headsets or headphones at high volume. DRAFT Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you cant hear people speaking near you. Industry Canada Notice If you experience hearing discomfort, including the sensation of pressure or fullness in your ears, ringing in your ears, or muffled speech, you should stop listening to the device through your headset or headphones and have your hearing checked. For more information about hearing, see our Web site at www.motorola.com/hearingsafety (in English only). Industry Canada Notice to Users Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, FCC Notice to Users FCC NoticeThe following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID:xxxxxx on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful Repetitive Motion When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.
[Mar0108]
including interference that may cause undesired operation of the device. See RSS-GEN 7.1.5. interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Industry Canada Notice 93 DRAFT interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Motorola Limited Warranty for the United States and Canada Warranty What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, messaging devices, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (Accessories) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products
(Software) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:
Products and Accessories Length of Coverage One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Products Covered Products and Accessories as defined above, unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap covers and cases. 94 Warranty DRAFT Products Covered Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection. Consumer and Professional Two-Way Radio Accessories. Products and Accessories that are Repaired or Replaced. Length of Coverage Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Ninety (90) days from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80%
of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or
(d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Warranty 95 DRAFT Software Products Covered Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk). Length of Coverage Ninety (90) days from the date of purchase. Exclusions Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided as is and without warranty. Who Is Covered?
This warranty extends only to the first consumer purchaser, and is not transferable. What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or 96 Warranty parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service. How to Obtain Warranty Service or Other Information USA Phones: 1-800-331-6456 Pagers: 1-800-548-9954 Two-Way Radios and Messaging Devices:
1-800-353-2729 All Products: 1-800-461-4575 1-888-390-6456 Canada TTY For Accessories and Software, please call the telephone number designated above for the product with which they are used. You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. DRAFT What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE Hearing Aid Compatibility with Mobile Phones Hearing AidsSome Motorola phones are measured for compatibility with hearing aids. If the box for your particular model has Rated for Hearing Aids printed on it, the following explanation applies. When some mobile phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone Hearing Aids 97 DRAFT successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices telecoil (T Switch or Information from the World Health Organization Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your childrens RF exposure by limiting the WHO Information Telephone Switch) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones. length of calls or by using handsfree devices to keep mobile phones away from your head and body. Source: WHO Fact Sheet 193 Further information: http://www.who.int./peh-emf Product Registration RegistrationOnline Product Registration:
www.motorola.com/us/productregistration Product registration is an important step toward enjoying your new Motorola product. Registering permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is not required for warranty coverage. 98 WHO Information Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status. Thank you for choosing a Motorola product. DRAFT Export Law Assurances Export LawThis product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of Caring for the Environment by Recycling this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. Recycling Information This symbol on a Motorola product means the product should not be disposed of with household waste. Disposal of your Mobile Device and Accessories Please do not dispose of mobile devices or electrical accessories (such as chargers, headsets, or batteries) with your household waste. These items should be disposed of in accordance with the national collection and recycling schemes operated by your local or regional authority. Alternatively, you may return unwanted mobile devices and electrical California Perchlorate Label Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:
Perchlorate Label accessories to any Motorola Approved Service Center in your region. Details of Motorola approved national recycling schemes, and further information on Motorola recycling activities can be found at:
www.motorola.com/recycling Disposal of your Mobile Device Packaging and Users Guide Product packaging and users guides should only be disposed of in accordance with national collection and recycling requirements. Please contact your regional authorities for more details. Perchlorate Material special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no special handling required by consumers. Export Law 99 DRAFT Privacy and Data Security Privacy and Data Security Motorola understands that privacy and data security are important to everyone. Because some features of your mobile device may affect your privacy or data security, please follow these recommendations to enhance protection of your information:
Monitor accessKeep your mobile device with you and do not leave it where others may have unmonitored access. Lock your devices keypad where this feature is available.
Keep software up to dateIf Motorola or a
software/application vendor releases a patch or software fix for your mobile device that updates the devices security, install it as soon as possible. Erase before recyclingDelete personal information or data from your mobile device prior to disposing of it or turning it in for recycling. For step-by-step instructions on how to delete all personal information from your device, see the section entitled master clear or delete data in the users guide. Note: For information on backing up your mobile device data before erasing it, go to www.motorola.com and then navigate to the downloads section of the consumer Web page for Motorola Backup or Motorola Phone Tools.
Understanding AGPSTo provide location information for emergency calls, certain Motorola mobile devices incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a users locationfor example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications. If you have further questions regarding how the use of your mobile device may impact your privacy or data security, please contact Motorola at privacy@motorola.com, or contact your service provider. Smart Practices While Driving Driving Safety Drive Safe, Call Smart Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas -- for example, handsfree use only. Go to www.motorola.com/callsmart (in English only) for more information. Your mobile device lets you communicate by voice and dataalmost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. 100 Privacy and Data Security DRAFT If you choose to use your mobile device while driving, remember the following tips:
Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
When available, use a handsfree device. If possible, add an additional layer of convenience to your mobile device with one of the many Motorola Original handsfree accessories available today.
Position your mobile device within easy reach. Be able to access your mobile device without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voicemail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while driving. Jotting down a to do list or going through your address book takes attention away from your primary responsibilitydriving safely.
Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.
Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.
Use your mobile device to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies.*
Use your mobile device to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.*
Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.*
* Wherever wireless phone service is available. Driving Safety 101 DRAFT index 1X indicator 16, 17 911 indicator 17 A accessories 11, 19 airplane mode indicator 17 alarm clock 77 alarm indicator 18 alarm only indicator 18 alert,turn off 33 answer options 29 attach a number 37 automatic e-mail setup 51 B back key 2 backlight 30 banner 30 102 index battery level indicator 17 battery life, extend 12 battery,conserving 12 Bluetooth active indicator 18 Bluetooth connected indicator 18 Bluetooth connections connect during call 81 Bluetooth on indicator 18 brightness 30 browser 67 browser key 2 C cables 78 calculator 77 calendar event indicator 18 call answer 29 conference 40 DTMF tones 40 call times 39 minute beep 39 reset 39 camera 60 camera lens 3 camera/camcorder key 2 capitalization 44 car kit 19 center key 2 clock 30 world 77 codes 20, 21 conference call 40 conserve battery 12 contacts 73 add entries to group 75 DRAFT call entry 73 create group 75 edit entry 73 picture ID 74 primary number 74 ringer ID 73 sort entries 74 view entry 73 D data call indicator 17 data volumes reset 39 dialed calls 34 digital indicator 16 display brightness 30 dormant indicator 17 drafts folder 55 DTMF tones 40 E e-mail automatic setup 51 read 52 send 52 set up manually 51 emergency number 35 end key 2 entry mode capitalization 44 function key 43 iTAP 42 QWERTY 42 EVDO indicator 17 export regulations 99 F function key 2 function key entry mode 43 G group add entries 75 create 75 H handsfree speaker 19 headset 19 headset port 3 hearing aid 38 hearing aids 97 home screen banner 30 I indicators 16 speakerphone 18 international access code 37 iTAP text entry mode 42 index 103 DRAFT K key function key 43 special 43 key volume 29 keypad lock 3, 21 keypad locked indicator 17 L language 30 location on indicator 17 lock keypad 21 phone 20 M menu language 30 message alerts 29 delete 54 104 index drafts 55 quick text 53, 54 send text message 53 set up 54 store message objects 55 text message 53 view sent message 54 message indicator 18 messaging key 2 micro USB port 3 minute beep 39 missed call indicator 18 Missed Calls message 34 N navigation key 2, 11 network adjust settings 75 call connect tones 76 call drop tone 76 no service indicator 17 notepad 77 O operator hosted e-mail 51 optional accessory 11 optional feature 11 P phone network settings, adjust 75 network, call connect tones 76 network, call drop tone 76 talking phone 28 phonebook 37 add entries to group 75 call entry 73 create group 75 edit entry 73 picture ID 74 primary number 74 DRAFT ringer ID 73 view entry 73 picture ID 74 power key 2 Q quick text 53, 54 QWERTY text entry mode 42 R received calls 34 recent calls 34 redial 27, 33 return a call 34 ringer ID 73 roaming indicator 17 S security code 21 send key 2 set up e-mail 51 signal strength indicator 16 sounds off (silent) indicator 18 speakerphone 19 speakerphone indicator 18 special keys 43 SSL indicator 17 status indicators 16 T text entry 41 TTY indicator 17 U unanswered call indicator 18 unlock code 20, 21 unlock, phone 20 USB cables 78 V vibrate on indicator 18 video 60 voice call indicator 18 voice key 3 voice note 66 play 66 voice recognition 68 voice recognition active indicator 17 voice recogntion listening indicator 17 voicemail 52 voicemail message indicator 18, 52 volume keys 3 W world clock 77 U.S. patent Re. 34,976 index 105 DRAFT 106 index DRAFT
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-05-27 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear | Class II permissive change or modification of presently authorized equipment |
2 | 2008-09-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
3 | JBP - Part 15 Class B Computing Device Peripheral | |||
4 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2009-05-27
|
||||
1 2 3 4 |
2008-09-26
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
Motorola Mobility LLC
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0004321311
|
||||
1 2 3 4 | Physical Address |
Motorola Mobility LLC
|
||||
1 2 3 4 |
Chicago, Illinois 60654
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 3 4 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 4 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
IHD
|
||||
1 2 3 4 | Equipment Product Code |
P56JX1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
J******** N********
|
||||
1 2 3 4 | Title |
Director Product Compliance
|
||||
1 2 3 4 | Telephone Number |
847-6********
|
||||
1 2 3 4 | Fax Number |
847-6********
|
||||
1 2 3 4 |
n******@motorola.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 | Name |
R**** O********
|
||||
1 2 3 4 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 4 |
Columbia, Maryland 21045
|
|||||
1 2 3 4 |
United States
|
|||||
1 2 3 4 | Telephone Number |
410-2********
|
||||
1 2 3 4 | Fax Number |
410-2********
|
||||
1 2 3 4 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/25/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Cellular/ PCS CDMA Transceiver with Bluetooth | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Class II Permissive Change. Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values are: Part 22 - Head: 1.08 W/kg; Body-worn: 1.07 W/kg; Part 24 - Head: 0.80 W/kg; Body-worn: 0.83 W/kg. HAC Rating: M4 T3 - 2007 | ||||
1 2 3 4 | Output power is conducted. This device is approved for use in the handset described in this filing. | |||||
1 2 3 4 | Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values are: Part 22 - Head: 1.08 W/kg; Body-worn: 0.81 W/kg; Part 24 - Head: 0.79 W/kg; Body-worn: 0.62 W/kg. HAC Rating: M4 T3 - 2007 | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Motorola Inc.
|
||||
1 2 3 4 | Name |
A**** P********
|
||||
1 2 3 4 | Telephone Number |
847-5********
|
||||
1 2 3 4 | Fax Number |
847-5********
|
||||
1 2 3 4 |
a******@motorola.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | HC | 824.7 | 848.31 | 0.491 | 0.359 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
1 | 2 | 24E | HC | 1851.25 | 1908.75 | 0.543 | 0.08 ppm | 1M27F9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0059000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | 16 CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 22H | HC | 824.7 | 848.31 | 0.491 | 0.359 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
4 | 2 | 24E | HC | 1851.25 | 1908.75 | 0.543 | 0.08 ppm | 1M27F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC