| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Motorola Exhibit 8 Users Manual | Users Manual | 2.57 MiB | July 12 1999 | |||
| 1 | External Photos | July 12 1999 | ||||||
| 1 | ID Label/Location Info | July 12 1999 | ||||||
| 1 | Parts List/Tune Up Info | July 12 1999 | ||||||
| 1 | RF Exposure Info | July 12 1999 | ||||||
| 1 | Cover Letter(s) | September 12 1999 | ||||||
| 1 | Attestation Statements | July 12 1999 | ||||||
| 1 | Test Report | September 12 1999 | ||||||
| 1 | Internal Photos | July 12 1999 | ||||||
| 1 | RF Exposure Info | |||||||
| 1 |
|
Users Manual RF Safety Page RESPONSE TO 12594 | RF Exposure Info | 42.72 KiB |
| 1 | Motorola Exhibit 8 Users Manual | Users Manual | 2.57 MiB | July 12 1999 |
APPLICANT: MOTOROLA, INC. FCC ID: IHDT6ZB1 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows:
The final version of the Users Manual will contain the following additional statement:
Note To ensure compliance with FCC exposure guidelines, only use the Motorola supplied carrying case, holster or other body-worn accessory for this product. EXHIBIT 8 m3gdr_en.bk : qkref.fm5 Page 1 Tuesday, October 26, 1999 12:46 PM Options Menu Quick Access e c n e r e f e R k c i u Q English m3gdr_en.bk : qkref.fm5 Page 2 Tuesday, October 26, 1999 12:46 PM Special Keys S Press to turn phone on and off. O Press to accept call, setting, option,... C Press to reject call, setting, option,... E Press to enter the Quick Access features.
$ Press to access the options or phone book menus.
<> Press both simultaneously to lock the keypad; also use to scroll left and right.
Press to scroll up and down. f Press to call Voicemail. Making a Call Enter CO. Receiving a Call Press O. Ending a Call Press O or C. Quick Access Features Press E followed by the appropriate key, or press E, scroll to the feature and press O to select. Adjust Ringer Volume Press E followed by the volume button to either increase or decrease the ringer volume. Redialling the Last Number Called 1 Press O to display the last number dialled. 2 Press O to call the number. One-Touch Dialling Press and hold the appropriate digit key 1 to 9. Storing Numbers in the Phone Book Press E2 to store a number on the SIM card. Recalling a Number from the Phone Book Use the volume button to scroll to the stored number, or press the appropriate digit key to skip to a particular letter. To make the call, press O. Making an Emergency Call Enter 112O. The call will be directed to a central emergency operator. Dialling Phone Book Numbers Enter G>O. Stopping a Call Alert Press the volume button when the phone is ringing. This will stop the alert but not answer the call. e c n e r e f e R k c i u Q English m3gdr_en.bk : intro.fm5 Page 1 Tuesday, October 26, 1999 12:46 PM Introduction Welcome Congratulations on your purchase of a mobile phone from Motorola, the world leader in cellular technology. The phones are packed with features that put you in control and give you unrivalled power, whilst remaining discrete. Control Customisable Quick Access Menu E - Place nine of your most frequently used features in your own personal menu so that they can be accessed with just two key presses. Icons make each feature easy to identify. Enjoyment and Entertainment FM Radio - Pre-set your favourite station or seek for your listening enjoyment. WAP - Easy keypad Internet access and fast delivery of information. Power Superb battery performance G - Each phone is capable of several hours conversation or several days standby, but is still small and light. Dual Band - versions of the phone include the powerful dual band feature which means that they can use 900 and 1800MHz bands for greater call success and allow wider roaming opportunities.
! Before you use your phone, please see the Your Battery section for important information on charging a new battery. Personality This cellular telephone incorporates Personality. Unique to Motorola, Personality removes the complexity of cellular communications by guiding you through the features and presenting you with simple choices every step of the way. Personality also allows you to personalise the way you use your phone - for example, different ringer tones, a phone book and network selection preferences - all presented with clarity and simplicity. In this manual, each of the Personality features is identified with an j symbol to indicate that it is customisable to meet your requirements. Introduction 1 English m3gdr_en.bk : intro.fm5 Page 2 Tuesday, October 26, 1999 12:46 PM Understanding this Manual Many of your phone options are accessed by a simple menu system. A full description of the menus and how to move around them is covered in the next section Menu Navigation. When the manual describes the use of each menu item, it will be assumed that you are familiar with the menu system. Key Presses Key presses are represented in this manual using symbols so that you may locate and use the required sequence quickly. A sequence of key presses may be shown as follows:
$OC This means that you should press the $ key followed by the O key and then the C key, in sequence, not simultaneously. Entering Information When you are requested to enter information, such as the number of the phone you wish to call, this is represented in bold type. For example:
C - enter the required telephone number. A - enter your Personal Identification Number. B - enter your unlock code. G - enter the Phone Book location number. Prompts and Messages Your phone responds to key presses by displaying either easy to understand prompts that guide you to the next action, or simple messages confirming that your action is complete. Prompts and messages are represented in this manual in LCD style, for example:
Enter PIN or Completed. Other Symbols You will find the following symbols used throughout this manual:
AA Note contains additional information which is relevant to the feature/item.
! A Caution contains important additional information which is relevant to the efficient and/or safe usage of your phone. j This symbol indicates that the feature is a Personality feature that can be customised to meet your requirements. i This symbol indicates a short key sequence for the feature. English 2 Introduction m3gdr_en.bk : intro.fm5 Page 3 Tuesday, October 26, 1999 12:46 PM Menu Navigation A large number of your phone's options are accessed by using menus which use a common approach for selection, change and cancellation. Please read this section carefully before attempting to access a menu option. When you understand the common approach to menu navigation and how the menus are shown on the page, you will be able to access and change options with ease. Entering the Menus Two different keys are used to access the menus:
$ enters the Options menu whilst in standby mode;
enters the In-call menu during a call. E enters the Quick Access menu. Once entered, the menus use the , , <, >, O and C keys in a common manner to access, select and change individual options. Leaving the Menus To leave any of the menus, you can either press and hold the C key or repeatedly press the C key. Both of these actions will return your phone to the standby mode. i Alternatively, a quicker way to leave the menus is to press EC. Menus and Sub-menus A menu is a simple list of options. Some of these options provide access to a further list of options called a sub-menu. When navigating through the menus you may find it is helpful to think in terms of menu levels - the parent menu being on one level and its sub-menus being on a lower level. Moving To and Selecting a Menu Option To move from one option to another on the same level, use the scroll keys: the key scrolls forwards and the key scrolls backwards. When you find the option you want, press the O key to select it. Depending on the option you select, one of three things will happen:
either a brief message will be displayed confirming an action, for example Completed. or a prompt will be displayed requesting you to enter information, for example Enter PIN or Enter Name. or the first option of a sub-menu will be displayed. You can select this option using the O key or browse through the other options using the scroll keys. To leave an option or sub-menu, press the C key. This will take you back to the parent menu item. Menu Options with Security Codes Some options are protected from misuse by requiring you to enter one of the security codes. To use these options, you must enter the requested code before proceeding. Introduction 3 English m3gdr_en.bk : intro.fm5 Page 4 Tuesday, October 26, 1999 12:46 PM Menu Navigation - A Working Example The following steps will take you through how to switch the Extended Menus option on:
1 When the phone is in the standby mode, press the $ key. This will access the Options menu and Access Internet will be displayed.#
2 Press the key repeatedly until the Phone Setup sub-
menu item is shown in the display. 3 Press the O key to select the sub-menu. 4 Press the key repeatedly until the Extended Menus sub-menu item is shown in the display. 5 Press the O key to select this item. You can now select between On or Off, the current setting will be shown with a z character. If the z character is next to Off, press and then O to switch on the Extended Menus. If the z character is next to On, press C to leave the setting as it is.
# If your service provider has added their own menu, Access Internet will not be the first item in the Options menu. Availability depends on the type and settings of the SIM card, and/or your subscription to these features. English 4 Introduction m3gdr_en.bk : intro.fm5 Page 5 Tuesday, October 26, 1999 12:46 PM j Short, Extended and Personalised Menus With Personality you can personalise the menus by choosing which features you want readily available. The features that are less frequently used can be stored out of sight. The menu diagrams in this manual show the condition of the menu settings when you first receive your phone. Some features are in the Short Menu and are shown in bold type. Other features are in the Extended Menu and appear in italics. You can change which features appear in the Short and Extended Menus, and therefore personalise the menus, to suit your requirements. If you want to move a feature from the Short Menu to the Extended Menu (or from the Extended Menu to the Short Menu), go to the feature and then hold down the O key until a prompt appears offering the following choices:
Add the current feature to the Short Menu/Extended Menu. Leave the current feature in the Short/Extended Menu. Select the option you want by pressing the O key. The settings for some menu features cannot be changed. Introduction 5 English m3gdr_en.bk : intro.fm5 Page 6 Tuesday, October 26, 1999 12:46 PM 418999 01 2303294 0800 11 48 49 902 100 077 08 445 1210 0800 553 109 0212 425 9090 0500 55 55 55 04 32 11 66 852 25063888 Qatar Saudi Arabia South Africa Spain Sweden Switzerland Turkey UK United Arab Emirates Hong Kong Peoples Republic of China 86 10 68466060 Singapore Taiwan United States of America Canada For e-mail queries contact:mcrc@ei.css.mot.com For Internet queries contact:http://www.mot.com 65 4855 333 886 2 87731746 1 800 331 6456 1 800 461 4575 Total Customer Satisfaction At Motorola, Total Customer Satisfaction is a top priority. If you have a question, a suggestion or a concern about your Motorola Cellular Phone, Motorola wants to hear from you. Please contact the Motorola Cellular Response Centre by fax on:
+44 (0) 131 458 6732, or use one of the local phone numbers in the following countries:
Austria Belgium Czech Republic Denmark Egypt Eire Finland France Germany Greece Italy Jordan Kuwait Lebanon Luxembourg Netherlands Norway Oman Portugal 0660 7246 0800 72 370 00420 2 21 85 21 01 4348 8005 02 3411800 01 402 6887 0800 117 036 0 803 303 302 0180 35050 00800 441 28150 02 696 333 16 06 863750 484 2000 Ext 1177 01 744156 0800 21 99 0800 022 27 43 22 55 10 04 790925 01 318 0051 English 6 Introduction m3gdr_en.bk : intro.fm5 Page 7 Tuesday, October 26, 1999 12:46 PM Motorolas Warranty Your Cellular Phone is warranted by Motorola to be of satisfactory quality, fit for its purpose and comply with applicable Motorola specifications for a period of twelve (12) months from the date you bought it (verified by reference to your proof of purchase). This warranty does not apply if the phone has:
1 been mishandled, misused, wilfully damaged, neglected, improperly tested, repaired, altered or defaced in any way. 2 a defect arising as a result of any failure to follow instructions either in the manual or product specification. 3 a defect which has arisen from the use of non-Motorola approved accessories or ancillary items attached to or in connection with the telephone. This warranty does not affect your statutory rights as a consumer. Warranty conditions may vary depending on the country in which you bought the phone. Introduction 7 English m3gdr_en.bk : intro.fm5 Page 8 Tuesday, October 26, 1999 12:46 PM English 8 Introduction m3gdr_en.bk : toc.fm5 Page 9 Tuesday, October 26, 1999 12:46 PM Contents Safety Important information for the efficient and safe operation of your phone ..............................................................................11 About Your Phone, Battery and SIM Card Introduces your phone, explains how to charge and maintain batteries, explains about your SIM Card...............................15 Making and Receiving Phone Calls Explains how to make single or conference calls, how to redial, how to transfer a call, and how to end a call....................23 Using The Options Menu Provides an explanation of the Options Menu and how to use it ..............................................................................................33 Using the Quick Access Menu Provides an explanation of the Quick Access Menu and how to use it......................................................................................73 Using the FM Radio Explains how to use the FM radio .................................................................................................................................................77 Accessories Details the accessories available for use with your phone..........................................................................................................79 What To Do If... Helps you to solve any problems that may occur.........................................................................................................................81 Index A comprehensive Index ..................................................................................................................................................................85 The Manufacturer reserves the right to make changes in technical and product specifications without prior notice. Contents 9 English m3gdr_en.bk : toc.fm5 Page 10 Tuesday, October 26, 1999 12:46 PM English 10 Contents m3gdr_en.bk : safety.fm5 Page 11 Tuesday, October 26, 1999 12:46 PM IMPORTANT For the efficient and safe operation of your wireless handheld portable telephone, observe these guidelines. Exposure To Radio Frequency Signals Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. European and International agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy. International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Verband Deutscher Elektringenieure (VDE) DIN-0848 Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy National Radiological Protection Board of the United Kingdom, GS 11, 1988 American National Standards Institute (ANSI) IEEE.C95.1-1992 National Council on Radiation Protection and Measurements
(NCRP). Report 86 Department of Health and Welfare Canada. Safety Code 6 Safety These standards are based on extensive scientific review. For example, over 120 scientists, engineers and physicians from universities, government health agencies and industry reviewed the available body of research to develop the updated ANSI Standard. The design of your phone complies with these standards when used normally. Antenna Care Use only the supplied or approved replacement antenna. Unauthorised antennas, modifications or attachments could damage the phone and may violate FCC regulations. Phone Operation Normal Position: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. Tips on Efficient Operation: For your phone to operate most efficiently:
Extend your antenna fully (if applicable). Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Safety 11 English m3gdr_en.bk : safety.fm5 Page 12 Tuesday, October 26, 1999 12:46 PM Batteries
! All batteries can cause property damage, injury or burns if a conductive material such as jewellery, keys or beaded chains touches exposed terminals. The material may complete an electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. When the battery is detached from the phone, your batteries are packed with a protective battery cover; please use this cover for storing your batteries when not in use. Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:
give full attention to driving - driving safely is your first responsibility use hands-free operation, if available pull off the road and park before making or answering a call if driving conditions so require. Electronic Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:
Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned on. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimise the potential for interference. If you have any reason to suspect that interference is taking place, turn your phone OFF immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. English 12 Safety m3gdr_en.bk : safety.fm5 Page 13 Tuesday, October 26, 1999 12:46 PM Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Turn your phone OFF in any facility where posted notices so require. Aircraft FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a blasting area or in areas posted: turn off two-
way radio. Obey all signs and instructions. Potentially Explosive Atmospheres Turn your phone OFF and do not remove the battery when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks, from your battery, in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; areas where fuel odors are present, i.e. if a gas/propane leak occurs in a car or home; areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. For Vehicles Equipped with an Air Bag An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Safety 13 English m3gdr_en.bk : safety.fm5 Page 14 Tuesday, October 26, 1999 12:46 PM European Union Directives Conformance Statement This product is in conformance with the requirements of the applicable EU Council Directives. Declarations of Conformance with the requirements are located at:
Motorola Ltd. European Cellular Subscriber Division Midpoint, Alenon Link Basingstoke, Hampshire RG21 7PL United Kingdom APPROVED for connection to telecommunications systems specified in the instructions for use subject to the conditions set out in them. S/1357/4/V/503894 English 14 Safety m3gdr_en.bk : abtphone.fm5 Page 15 Tuesday, October 26, 1999 12:46 PM About Your Phone, Battery and SIM Card Special Keys S Turns the phone on and off. O Accept call, setting, option. C Reject call, setting, option. E Enter the Quick Access menu.
$ Press to access the Options and Phone Book menus.
<> Press both simultaneously to lock the keypad; also use to scroll left and right.
Press to scroll up and down. f Press to call Voicemail. AThe shape of the keys that appear in the manual may vary slightly from those on the phone. Volume Buttons The Volume buttons (+-) are on the left-hand side of your phone. The buttons are used for adjusting the keypad, earpiece and ringer volume. A volume meter will display the current volume setting. The meter will disappear after a short time, or if you press O or C. To adjust the keypad and earpiece volume, press the buttons with no other features selected. To adjust the ringer volume, first select the Adjust Ring Volume option in the Phone Setup Menu and then use the buttons to set the required volume. AIf you receive a call and you do not want to answer it immediately, you can press the volume buttons to stop the phone from ringing. This will not answer the call. The Radio Button The FM Radio button is on the right-hand side of your phone. Press it to start and stop the radio. Refer to Using the FM Radio for more information. The Display The display on your phone can show alphanumeric characters as well as useful information symbols. The various elements of the display are as follows:
About Your Phone, Battery and SIM Card 15 English m3gdr_en.bk : abtphone.fm5 Page 16 Tuesday, October 26, 1999 12:46 PM ABC123 rx k n l h o Characters are used to display messages and telephone numbers. Signal Strength. The more segments displayed in the bar graph, the better the signal strength. In Use. Displayed when a call is in progress. Home Zone. Availability depends on your service provider. Roam. Displayed when you are registered on a system other than your home system. Ringer On. Displayed when the call ringer is selected. If you select the No Ring option, this symbol will not be displayed. Short Message Service. Displayed when the phone has received a message. The symbol will flash when your message storage area is full. Earpiece Connector The earpiece connector is on the left-hand side of your phone, above the volume buttons. Use this connector for the headset accessories available from your Motorola stockist. Looking After Your Phone Never leave your phone or battery in extreme temperatures
(over 60C), for example behind glass in very hot, direct sunlight. To clean your phone, use a moistened or antistatic cloth. Do not use a dry or electrostatically charged cloth. p Voicemail Waiting Indicator. Displayed when you have a voice message waiting. The availability of this feature depends on your service provider. Battery Charge Indicator. The more segments displayed, the greater the battery charge. Icons are displayed when you are in the Quick Access menu. Indicates that a menu item is currently selected. q B...K z In addition, when you are expected to press the O key, a prompt will appear in the display, for example Completed. Low Temperature Use The liquid crystal display used in your phone will behave differently at extremely low temperatures. You may notice that the display responds slowly to key presses; this is to be expected and does not affect the phone operation in any way. English 16 About Your Phone, Battery and SIM Card m3gdr_en.bk : abtphone.fm5 Page 17 Tuesday, October 26, 1999 12:46 PM Your Battery Installing the Batteries New batteries are supplied uncharged and fitted within a protective battery carrier. To remove the batteries, press the release catch on the battery carrier and open the cover. To install the batteries in your phone:
1 Press the release catch of the phone battery cover and slide the battery cover towards the bottom of the phone. 2 Align the positive and negative (+ and -) connections on the battery with the positive and negative (+ and -) connections within the phone. 3 Press the battery towards the connections and push it downwards until it clicks into place. 4 Replace the phone battery cover. Important Battery Information
! Always treat your batteries with care. See Batteries, at the beginning of this manual.
! Never leave your battery in extremely high temperatures (over 60C), for example behind glass in very hot, direct sunlight.
! Only Motorola Original Accessory batteries can be charged in the phone. This is to protect you and your phone from the risks of incorrect charging. Charging a New Battery New batteries are supplied in a totally uncharged state. To ensure maximum battery performance, a new battery (or battery that has not been used for several months) should be charged for at least 14 hours before use. AA new battery will require several full charge/discharge cycles in order to achieve its optimum performance. AA new battery, or a battery that has not been used for several months, may cause a premature fully charged indication. Ignore this indication and let the battery charge for several more hours, remove and re-insert the battery into the charger, and charge for an additional 14 hours.
! Your batteries will not charge if they are not matched properly to the phone connection markings (+ and -). Please ensure that you have installed the batteries properly before initiating a charge. To ensure that you enjoy maximum battery life and use your battery to its fullest capacity:
The battery should be at or near room temperature when charging. About Your Phone, Battery and SIM Card 17 English m3gdr_en.bk : abtphone.fm5 Page 18 Tuesday, October 26, 1999 12:46 PM Battery Performance and Maintenance Best battery performance will be achieved when you regularly charge and discharge batteries as instructed in this manual. Battery performance is greatly affected by network coverage. Set Battery Saving Mode to On (see Phone Setup Menu) and/or Frequency of Search to Slow or Medium
(see Network Selection Menu). If left unused, a fully charged battery will discharge itself in approximately one month. When not in use, store your battery uncharged in a cool, dark and dry place. Removing Your Batteries
! Switch off your phone before removing batteries. Failure to do so may damage your phone memory. 1 Press the release catch of the phone battery cover and slide the battery cover towards the bottom of the phone. 2 Remove the batteries. Charging Your Battery Using the Travel Charger The travel charger can power the phone and charge a fitted battery.
! Ensure that the local mains voltage at your location matches that of your travel charger. Install the batteries into your phone (see Installing the Batteries). To charge your battery:
1 Attach the correct adapter plug to the travel charger. 2 Connect the travel charger to the phone.. English 18 About Your Phone, Battery and SIM Card 3 Insert the travel charger plug into a suitable mains power socket. m3gdr_en.bk : abtphone.fm5 Page 19 Tuesday, October 26, 1999 12:46 PM A beep-tone is heard and the battery icon flashes when charging begins. AThe beep-tone on the phone will not occur if the batteries are installed improperly. The beep-tone may take two minutes to occur with new or fully drained batteries. Battery Meter Indicators The battery meter displays different messages depending on the batteries attached, and whether or not there is an external power source. The battery meter is found in the Call Related Features part of the Options Menu. The state of charging is monitored and displayed by your phone. See Battery Meter Indicators later in this section for details. Low Battery Warning When the battery level is low and only a few minutes of talk time remain, a warning signal (two double beeps) will sound, and Low Battery will be displayed. When the battery is completely discharged, your phone will turn off. Battery Indicators Your phone monitors and displays information about your battery. The following message will appear on the display, as the condition occurs:
Low Battery The battery charge is low. The battery should be recharged. Charging Battery Charging Complete The battery is being charged. Charging is complete. AWhen the battery is completely discharged, you must charge the battery for one minute before you can make or accept a phone call. About Your Phone, Battery and SIM Card 19 English m3gdr_en.bk : abtphone.fm5 Page 20 Tuesday, October 26, 1999 12:46 PM SIM Card Insertion/Removal 1 Switch off your phone by pressing and holding the S key, remove the battery cover and the batteries. 2 Slide the SIM cover towards the right and lift up the left side of the cover. Your SIM Card Your SIM (Subscriber Identity Module) card was supplied by your Cellular Service Provider when you bought your phone. You will not be able to make or receive calls if you do not have a SIM card inserted in your phone. ASome networks allow you to make emergency calls without a SIM card inserted. The SIM card is a Smart Card that contains your phone number, service details and memory for storing Phone Book numbers and messages. You can therefore use your SIM card in someone elses GSM phone and you will be charged for the call. Like a bank or credit card, you should keep your SIM card secure. Do not bend or scratch your card and avoid exposure to static electricity or water.
! Switch off your phone before inserting or removing the SIM card. Failure to do so may damage the memory on your SIM card. 3 If necessary, remove the SIM card from the recess in the base of the phone. English 20 About Your Phone, Battery and SIM Card m3gdr_en.bk : abtphone.fm5 Page 21 Tuesday, October 26, 1999 12:46 PM 4 Place the SIM card into the recess in the base of the phone so that the notch is in the top left-hand corner. 5 Replace the SIM cover, then press and slide it to the left to lock it into place. 6 Replace the batteries and battery cover. If the SIM card is inserted the wrong way round, or damaged, the Check Card message may be displayed. Remove the SIM card, check that it is the right way round and then re-insert it into the phone. If either of the Bad Card See Supplier or Blocked See Supplier messages are displayed, then you will need to contact your Cellular Service Provider. About Your Phone, Battery and SIM Card 21 English m3gdr_en.bk : abtphone.fm5 Page 22 Tuesday, October 26, 1999 12:46 PM English 22 About Your Phone, Battery and SIM Card m3gdr_en.bk : usephone.fm5 Page 23 Tuesday, October 26, 1999 12:46 PM Making and Receiving Phone Calls Switching the Phone On and Off To switch the phone on or off, press and hold the S key. If you switch the phone on and there is no SIM card inserted, you will be asked to insert one. Once inserted, the phone will check that the SIM card is valid. A number of messages will then be displayed:
Enter PIN - a request to enter the SIM card PIN code (if required). Enter Phone Unlock Code - a request to enter the phone unlock code (if required). Searching... followed by a network name - as the phone searches and then finds a suitable network to connect to. Entering Your SIM Card PIN Code To enter the PIN code, enter AO. As you type in each digit of the PIN code a * character will be displayed. If you make a mistake, press and release the C key to remove the last digit. Holding the C key down will remove the entire entry. When the PIN code is complete press the O key. If the PIN code entered is incorrect, the warning message Wrong PIN will be displayed, followed by Enter PIN.
! If the PIN number is entered incorrectly three times in a row, your phone will automatically lock-up and the Blocked message will be displayed. See Unblocking Your Phone for details on unblocking your phone. The PIN code can be changed, see Change SIM PIN Code in the Phone Setup Menu section for more details. j Entering Your Unlock Code If your phone displays the message Enter Phone Unlock Code you must enter your unlocking code by entering BO. The unlock code is a four digit number which is set at manufacture to 1234. The code can be changed, see Change Unlock Code in the Phone Setup Menu section for more details. If you forget your unlock code, press the $ key. This will display the Change Unlock Code option. Enter O D, enter a new unlock code, and press O. Locking the Keypad Press the < and > keys simultaneously to prevent accidental usage of the phone. To remove the lock, press <
and > simultaneously. All keys with the exception of the S key will be disabled. You can still answer an incoming call by pressing O when the keypad is locked. Making and Receiving Phone Calls 23 English m3gdr_en.bk : usephone.fm5 Page 24 Tuesday, October 26, 1999 12:46 PM Making a Phone Call To make a phone call, your phone must be switched on and unlocked. It will not be possible to make a phone call unless you are in an area where there is a GSM900 or 1800 service. When a service has been found, a series of rising bars, x, will show the signal strength. There are a number of different ways to make a phone call:
Using the digit keys. Using automatic redial. Redialling the last number called. One-touch dialling a Phone Book entry*. Dialling a Phone Book entry*. Calling an embedded number in a message. A*Your phone contains a 'phone book' that can be used to store names and telephone numbers. See What is the Phone Book? for further details. The simplest method of making a phone call is to enter the number using the digit keys then press O. AIf you make a mistake, press and release the C key to remove the last digit. Holding the C key down will remove the entire number. Your phone will then attempt to make the phone call. The display will show Calling to show the call attempt is being made. If the call is not answered, pressing O, at this point will end the attempt. English 24 Making and Receiving Phone Calls When the phone call is answered, the display will change to Connected for a few seconds, followed by End Call?. To end your call press O. Automatic Redial If your call attempt does not succeed, the message Redial? will be displayed for five seconds. Pressing O at this point will automatically redial the phone number. When the call is answered, you will hear a short ring tone. The maximum number of redial attempts is set by your Cellular Service Provider. If the phone call cannot be connected within this maximum, the message Redial Failed will be shown. Redialling the Last Number Called i When in standby mode, press OO. Alternatively, you can retrieve the last number dialled using the Last Ten Calls feature in the Phone Book menu. j One-Touch Dialling Phone Book Numbers To quickly retrieve and dial a number stored in the first nine locations of your Phone Book1, press and hold the appropriate digit key. For example, pressing and holding 2 will dial the phone number stored in location 2 of your Phone Book. AYou do not need to press O to call the number. 1. The Phone Book entries that you are able to access will depend on the One-Touch Dial Setting option in the Phone Book menu. m3gdr_en.bk : usephone.fm5 Page 25 Tuesday, October 26, 1999 12:46 PM j Dialling Phone Book Numbers Alternatively, enter the phone book G number followed by >O. Calling an Embedded Number in a Message Details on how to call a number embedded in a message are given in the Messages Menu section. International Phone Calls To make an international phone call press and hold the 0 key. After a couple of seconds the international dialling prefix + will appear in the display, this allows you to call from any country without knowing the local international access code. Now enter the country code, followed by the phone number. The country code follows the conventional format, 49 for Germany, 44 for the UK, 46 for Sweden, etc. Just like a conventional international call, remove the leading '0'
of the area code when you dial. Inserting Pauses Into Phone Numbers To obtain a three second 'pause' character in a phone number, press and hold the < key for a couple of seconds, the pause symbol will appear. The pause character produces a three second delay whenever it is used. However, the first pause character in a phone number is a special case, it will not begin its delay until the call is answered. Pause - A Working Example. If, for example, you have a tone-based voicemail system on 555-6911, with a mailbox number 1066 and password 2001. Then you may dial the following number:
555691110662001O. The first part of the number would be used to call the voicemail system. When the call is answered the first pause will produce a delay of three seconds before the tones for 1066 are sent to select the mailbox. There will be a second pause of three seconds before the tones for 2001 are sent as the password. GSM Emergency Calls The world-wide GSM standard provides a single, uniform number, 112, to dial in cases of emergency. Provided that your phone has found a network, you will be able to make an emergency call. The call can be made regardless of any security codes and, depending on the network, with or without a SIM card inserted. The emergency call will be directed to a central emergency operator. To dial the GSM emergency number, press 112O. While the emergency call is being made and connected, the display will show Emergency Calling. AEmergency calls can be made without a battery fitted if the phone is powered by the travel charger or vehicular power adapter. AAdditional emergency numbers may be supported based on your subscription. Please see your service provider for additional information on these services. Making and Receiving Phone Calls 25 English m3gdr_en.bk : usephone.fm5 Page 26 Tuesday, October 26, 1999 12:46 PM Receiving a Phone Call To receive a phone call:
Your phone must be switched on and unlocked. You must be in an area where there is GSM900/1800 service. Your Call Diversion and Call Barring settings should not be set to divert or bar incoming calls. When your phone receives a call, it will ring and the display will show the Call message (if you have Caller Line Identification, the callers number or name will be displayed instead). To answer the call, press O. If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the
'Detailed Diverting - If Busy' or Divert when unavailable options in the Options Menu, the caller will be diverted to the forwarding number, otherwise the caller will hear the busy tone. or Press and hold the C key. This will reject the incoming call. No call divert option will be offered. If your phone rings and you do not answer it, the message Unanswered Call will be displayed to show you that a call attempt was received. Ending a Phone Call To end a phone call, press O or C. English 26 Making and Receiving Phone Calls m3gdr_en.bk : usephone.fm5 Page 27 Tuesday, October 26, 1999 12:46 PM In-Call Menu The In-Call menu provides access to additional functionality during a call. Entering the In-Call Menu The In-Call menu is accessed by pressing the $ key during a call. Leaving the In-Call Menu To leave the In-Call menu press the C key. In-Call Menu Options The options listed in the In-Call menu will dynamically change depending on the current call state. The following list contains all of the possible options in the In-Call menu. AOnly some of the options will appear at any given time. The order of the options may vary. Hold Call This option will put the active call on hold. Make a New Call This option allows you to make another call. Restrict My Number This option allows you to make a call without the remote user getting advanced warning of the number. End Active Call This option terminates the active call, and makes the call that was previously on hold, the active call. End Held Call This option will terminate a held call. Making and Receiving Phone Calls 27 English m3gdr_en.bk : usephone.fm5 Page 28 Tuesday, October 26, 1999 12:46 PM End Current And Held Call This option will terminate all connected calls. Switch Calls This option allows you to switch between the active call and the call that is on hold. Conference Call This option connects you with up to five other telephones on one call (see Making a Conference Call). Transfer Call This option transfers a call to another telephone (see Transfer Call later in this section). Split Call This option allows you to separate an individual from the main Conference Call. Reject Waiting Call This option will reject a waiting call. Reconnect This option will make the call on hold the active call. Reconnect Held Call This option is similar to Reconnect but will appear if you have a call on hold, and a call waiting. Reconnect Held Call will make the call on hold the active call. Turn Mute On or Off Temporarily turns the microphone off during a phone call. Reselect this option to resume your conversation. j Call Holding and Call Waiting Your phone supports the GSM options of Call Holding and Call Waiting. Using these options you can place a current phone call on hold and accept an incoming call or start a second call (See Call Waiting in the Call Related Features menu for details of how to control this feature). Call Holding and Call Waiting Scenarios The display will automatically change according to the status of your current call (or calls) and will propose the option that you are most likely to want. Press O to accept this option or press
$ and then to scroll through the In-Call menu for the alternative options. By following this procedure you will find that even the triple combination of an active call, a held call, and a call waiting is easy to manage. The following points summarise the more common situations:
To put an active call on hold, press $, the display will show Hold Call Select? - press O to put the call on hold. To reconnect the call, press O. To put an active call on hold and make another call, first put the active call on hold, then press $ and select the Make New Call option1. To switch between an active call and a held call press O at the Two Calls Switch? prompt. 1. A quicker method of making another call is to enter the number to be called directly and press O. Your phone will place the current call on hold and attempt to call the number entered. English 28 Making and Receiving Phone Calls m3gdr_en.bk : usephone.fm5 Page 29 Tuesday, October 26, 1999 12:46 PM Anonymous The person who is calling you has blocked their number from appearing on your phone. Unavailable The network is unable to provide the callers number. Conference Unsuccessful The request for Conference Call has been unsuccessful. Transferring Call A request to transfer a call has been made. Transfer Unsuccessful The request to transfer a call has been unsuccessful. To accept a waiting call during an active call, press O at the Call Waiting Answer? prompt. The active call will be placed on hold. If you prefer to end the active call before accepting the waiting call, press $ and select the End Active Call option. To reject a waiting call, press $ and select the Reject Call Waiting option (or simply press the C key). AIf you have an active call, a call on hold and a call waiting, you cannot accept the waiting call until you end either the active call or the held call, or join the active and held calls. Call Holding and Call Waiting Messages During Call Holding and/or Call Waiting operations, your phone may display one or more of the following messages:
Trying A request to hold the active call, swap the active with a held call, or add a member to a Conference Call, has been made. or A request to reconnect the held call has been made. Hold Failed The request to hold a call has been unsuccessful. Cannot Hold Second Call A call is already on hold, you cannot place two calls on hold at the same time. Connection Failed The held call could not be made active again. Busy Try Later Your phone is still working on a previous command. Wait a short time before repeating the command. Making and Receiving Phone Calls 29 English m3gdr_en.bk : usephone.fm5 Page 30 Tuesday, October 26, 1999 12:46 PM Making a Conference Call This option joins the active call with a held call. With Conference Call, you can have a conference with up to five other telephones. At any time during your call, you can add, disconnect or separate individuals from the Conference Call using other In-Call menu options. AYou must subscribe to both Conference Call and Call Waiting Supplementary Services to be able to use this feature. Initiating a Conference Call To initiate a Conference Call, place the active call on hold, and dial another phone number. You will then have one active call and one call on hold. Press the $ key to enter the In-Call menu and select Conference Call. The currently active call and the call on hold will then join into one Conference Call. Managing a Conference Call While in a Conference Call, you will have the option to add new calls to the Conference Call or separate one of the members from the Conference Call. Adding a New Call There are a number of different ways to add new calls to the Conference Call:
Using the digit keys. Using the Make New Call option from the In-Call menu. Recalling a Phone Book Entry using Quick Access. Answer Call Waiting. English 30 Making and Receiving Phone Calls No matter which method is chosen to add a new call, the original Conference Call will be first placed on hold while the new call is being connected. You must then enter the In-Call menu and select Conference Call to join the New Call with the original Conference Call in progress. Separate One of the Members in the Conference During a Conference Call, you will also have the option to separate a selected member from the main Conference Call. AIn order to separate a member from the main Conference Call, there must not be any calls on hold. Press $ during a Conference Call and select Split Call. You will then be presented with the phone number or name of all members of the Conference Call. Use the scroll keys to find the selected member of the Conference Call. Once the desired member is selected, press the O key and select Split Call. At this point, the selected call will be separated from the main Conference Call and private conversation between you and the selected member is possible. To re-join all the parties again, select Conference Call from the In-Call menu. m3gdr_en.bk : usephone.fm5 Page 31 Tuesday, October 26, 1999 12:46 PM Transfer Call Transfer Call transfers a call to another telephone. There are two ways to transfer a call; before or after the third party is connected. AYou must subscribe to both Conference Call and Call Waiting Supplementary Services to be able to use this feature. Initiating Transfer Call Before the Third Party is Connected To transfer a call to another telephone, press the $ key and select Transfer Call from the In-Call menu. Enter the number where the call will be transferred and press O. Your phone will then attempt to transfer the call. The display will show Transferring Call followed by Call Transferred. When the call has been successfully transferred, you will be disconnected automatically. Initiating Transfer Call After the Third Party is Connected If you already have an active call and a call on hold, press the
$ key and select Transfer Call from the In-Call menu. Your phone will then attempt to transfer the active call to the call on hold. The display will show Transferring Call followed by Call Transferred. Once the call has been successfully transferred, you will be disconnected automatically. Making and Receiving Phone Calls 31 English m3gdr_en.bk : usephone.fm5 Page 32 Tuesday, October 26, 1999 12:46 PM English 32 Making and Receiving Phone Calls m3gdr_en.bk : opt_menu.fm5 Page 33 Tuesday, October 26, 1999 12:46 PM Using the Options Menu Using the Options Menu 33 English m3gdr_en.bk : opt_menu.fm5 Page 34 Tuesday, October 26, 1999 12:46 PM Access Internet AAccess Internet is a network and subscription-dependent Using the Main Menu feature. Contact your service provider for details about the mobile internet services based on the WAP (Wireless Application Protocol) technology that they provide. Your phone has mobile internet access. This allows you to use the mobile internet services available from your service provider, for example, financial, sport, travel and entertainment information services. This section explains:
some of the common display features how to set up your phone for mobile internet access how to start a mobile internet session how to use and end the mobile internet session. Common Display Features Your service provider determines the layout and information that appears on the display. This example display illustrates a typical mobile internet screen and the soft keys you use to select and navigate through options. English 34 Using the Options Menu To display the Main Menu, press and hold $ until the Main Menu appears. You can access the Main Menu only during a mobile internet session. Then scroll up or down to highlight the appropriate menu option and press O to select it. The Main Menu includes special commands, for example:
Help:
provides help, if available, for the previously-
highlighted option. returns you to your home page. allows you to add a site to your Bookmarks folder. contains the options to set up your mobile internet access. Home:
Mark site:
Setup:
Using Bookmarks Select Mark site from the Main Menu. When your phone prompts you for a Bookmark?, press any key from 1 to 9. A Stored XXX message confirm that the bookmark key is set. To return to the bookmark during a mobile internet session, press and hold the appropriate key. Using the Soft Keys To select a soft key from the display during a mobile internet session, press O or $. The soft keys change so that they are appropriate for the current display, for example, Quit, OK, Back or View. In the example display, O selects the softkey1 and
$ selects the softkey2. m3gdr_en.bk : opt_menu.fm5 Page 35 Tuesday, October 26, 1999 12:46 PM Mobile Internet Icons and Messages Icon or Message Description Sending )))))) Sending data to the internet. Receiving ((((((
Receiving data from the internet. Connecting ..... Connecting to the internet. Working ..... Performing an internet activity.
[struck out key symbol]
Non secure internet connection. AThe internet service you receive determines the icons and messages that appear on the display. Setting Up for Mobile Internet Access AYour service provider may set up your mobile internet access automatically. To set up your mobile internet access manually, you will need the following information:
Primary Data Gateway: this is the IP address of the gateway through which you will access the mobile internet. The IP address is in the format 123.456.789.123. Phone Number: this is the number that your phone will call to access the internet; your Internet Service Provider (ISP) issues this number. User Name: this is your user name, provided by your ISP. User Password: this is your password, provided by your ISP. Baud Rate: this is likely to be 9600, the standard data rate for GSM phones. Idle Time Out: this is the time the phone will wait before hanging up if it detects no internet activity; usually 600 seconds; maximum 1000 seconds. Line type: this is the type of call you make to your ISP, either modem or ISDN. Connection Type: this is either Non-Transparent or Transparent, depending on your service provider. Also ensure that your mobile phone number shows when you select the menu option My Phone Number(s), under the Phone Book Main Menu. This is used as your account number by the Primary Data Gateway. If your number is not shown, add it by following the instructions in My Phone Number(s). Select the menu option Access Internet and press the O key. Press and hold the $ key until the Main Menu appears. Scroll down through the options to 6> Setup and press O key. Enter the information listed above at the appropriate menu item by first selecting the item and choosing the softkey to edit it as necessary. When you have entered all the appropriate information, exit the Main Menu by pressing the C key. Turn your phone off and then on again to make sure you register all changes. You will then be ready to start a mobile internet session. Using the Options Menu 35 English m3gdr_en.bk : opt_menu.fm5 Page 36 Tuesday, October 26, 1999 12:46 PM Starting a Mobile Internet Session i Press E. Select the Quick Access feature ( Access Internet). The menu option Access Internet starts a mobile internet session. When you start a mobile internet session, you will see the messages Connecting ...., Sending )))) and Receiving (((( before your home page appears. Typically, an ISDN connection will take approximately 10 seconds and a modem connection will take 30 seconds. Using the Mobile Internet Session Selecting Options Within a Mobile Internet Session If the Internet page has a list of menu options, scroll up or down to highlight the appropriate menu option and then press O to select it. Press C to return to the previous screen. When the text for a menu option is too wide for the screen, the phone uses two screens and repeats each half of the menu list until you make a selection. Editing Text Within a Mobile Internet Session You edit text in a mobile internet session in a similar way to editting text in all other phone functions, but you can use softkeys to enter symbols and numbers easily. See How to Enter Alphabetic Characters. Making and Receiving Calls During a Mobile Internet Session To make a call, you must end the mobile internet session and make your call in the normal way. If you receive a call during a mobile internet session, your phone prompts you to Answer Call? Press O to accept the call or press C to reject it. If you answer the call, Session Paused - Resume? appears when you end the call. Press O to resume your mobile internet session or press C to return to the idle phone display. Internet Service Alerts You do not need to be using the mobile internet to receive an internet service alert. If you receive an alert, your phone:
emits an alert tone (depending on the Ringer On or Off setting) displays a pop up screen with appropriate alert details. Press O to display the contents of the alert or press C to reject it. Ending a Mobile Internet Session If you press and hold C, the Internet home page appears. Press C again to end the mobile internet session. English 36 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 37 Tuesday, October 26, 1999 12:46 PM Summary of Keys Within a Mobile Internet Session Key action Effect in mobile internet Effect in text editora Press O Selects the first soft key
(Softkey1 in the example). Press $ Selects the second soft key
(Softkey2 in the example). Press and hold
Displays the mobile internet menu. Press C Takes you back to the previous screen. Takes you back to the Internet home page. Ends the mobile internet session. Press and hold C Press C again Press 1...9 Deletes the character in front of the cursor. Deletes all the characters in the edit area. Selects a menu option in a list Inserts an alphanumeric character. Press and hold 1...9 Takes you to a bookmarked page. Press
or Takes you up or down through a list of menu options. Changes the case for the next alphanumeric character. Moves the cursor one position to the left or one position to the right. a. For full details, see see How to Enter Alphabetic Characters. Using the Options Menu 37 English m3gdr_en.bk : opt_menu.fm5 Page 38 Tuesday, October 26, 1999 12:46 PM The Phone Book Menu English 38 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 39 Tuesday, October 26, 1999 12:46 PM Using the Phone Book Menu You can store names and telephone numbers as entries in the Personal Numbers list and in the Fixed Dial list on your SIM card. The amount of Personal Numbers entries will vary depending upon the type of SIM card issued by your Cellular Service Provider. You can also store up to 40 entries in a Fixed Dialling list if you have this feature. Fixed Dialling allows you to limit use of your phone to particular numbers. Each Phone Book entry comprises:
A phone number - up to 20 digits*. A name - up to 50 characters* but typically 10 or less. A location label - from 1 to 155* in your Personal Numbers list, or 1 to 40* in your Fixed Dial list.
* Dependent on SIM card. How to Enter Alphabetic Characters The 0, 1,... ..,8 and 9 keys are used to enter alphabetic characters, for example when storing names in the Phone Book or when creating messages. For example, if you press the 5 key, the first displayed character will be J. If this is not the required character, then you can press the same key again to show K. Another press will display L, another... ...will display 5. Your phone will continue to scroll through the characters available on the selected key with each new key press. A long press of any of the keys will switch all the characters to lower case, a second long press will switch back to upper case. To enter the next character press the appropriate key. If, however, the next character is on the same key as the previous character you will first need to press the > key. Pressing the
> key a second time will produce a space. If a mistake has been made, you can go back to the incorrect character by pressing <. Characters can be removed from the display by pressing the C key. The character before the cursor () is the character which will be deleted. Press the O key to store the information. Using the Options Menu 39 English m3gdr_en.bk : opt_menu.fm5 Page 40 Tuesday, October 26, 1999 12:46 PM Available Characters Press the appropriate keys to get the following characters:
1 Space . 1 ? ! , & : " ( ) ' ` @ %
Space . 1 ? ! , & : " ( ) ' ` @ %
2 A B C 2 [
a b c 2 {
3 D E F 3 d e f 3 4 G H I 4 g h i 4 5 J K L 5 j k l 5 6 M N O 6 ] \
m n o 6 } |
7 P Q R S 7 p q r s 7 8 T U V 8 ^
t u v 8 ~
9 W X Y Z 9 w x y z 9 0 + - 0 x * / = > < #
+ - 0 x * / = > < #
Personal Numbers The Personal Numbers sub-menu is used for creating and managing your list of personal numbers. Find Entry By Name This option is used to select a telephone number from a list of alphabetically sorted Phone Book names. Once selected, this option will display the message Enter Name. You can enter a maximum of three characters from a name but you do not need to enter all three characters to begin a search. The Phone Book entries will be searched and the first alphabetically matching entry will be displayed. If there isnt a name matching your entry, the nearest alphabetically matching entry will be displayed. If you do not enter any name information, the first alphabetical entry will be displayed. If there are no names stored, No Names Stored will be displayed. To display adjacent Phone Book entries use the key. When the desired name is displayed press the O key to select it. The phone then enters the options sub-menu for Find Entry By Name. See The Options for Find Entry By .... The top line for each key shows the upper case characters, the lower line shows the lower case. English 40 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 41 Tuesday, October 26, 1999 12:46 PM Find Entry By Location i G>
This option is used to select a telephone number from a list of numerically sorted Phone Book locations. Once selected, this option will display the message Enter Location. You can now enter a location number. If the entered location is not valid, a timed message Range 1-XXX will be displayed and the phone will return to the Enter Location menu item. The Phone Book entries will be searched and an entry will be displayed. If you enter a location number for which there is no entry, Location Empty will be displayed and the nearest non-empty location will be selected instead. If you did not enter a location, the first numerical entry will be displayed. If there are no numbers stored, No Numbers Stored will be displayed. To display adjacent Phone Book entries use the key. When the desired name is displayed press the O key to select it. The phone then enters the options sub-menu for Find Entry By Location. See The Options for Find Entry By ... The Options for Find Entry By ... Once a Phone Book entry has been selected, it can be called, modified or deleted. Call Number This option is used to call the selected Phone Book telephone number. Modify Name or Number This option is used to change the selected Phone Book entry. The entrys current telephone number and name will be presented, in turn, for modification. You can accept the current settings or modify as required. Erase Name and Number This option is used to erase the selected Phone Book entry. Simply press the O key when the phone displays the message Erase Name And Number. The option will display the timed message Erased XXX and then return to the Find Entry menu item. Add Entry i Press E. Select the Quick Access feature (T Add to SIM?). This option is used to add (store) entries to the SIM Card. Using the Options Menu 41 English m3gdr_en.bk : opt_menu.fm5 Page 42 Tuesday, October 26, 1999 12:46 PM Check Capacity This option is used to check the number of free entries in the phone or SIM card memory areas. Check SIM Capacity Once selected, a timed message XX Unused Locations displays the requested information. Prevent Access This option enables you to prevent access to the Personal Numbers list. To SIM Card Memory, No Memory Restrictions You can prevent access to all entries in the SIM card memory. To cancel all access restrictions use the No Memory Restrictions option. When you change the restrictions, you will be requested to enter the Security Code before the change is made. Show Services i Press E. Select the Quick Access feature (e Show Services?). This option displays a list of phone numbers and services provided by your Cellular Service Provider. AAvailability depends on the type and settings of the SIM card, and/or your subscription to this feature. Last Ten Calls These options allow you to review your most recently used phone numbers. Depending on the option you choose, you can then redial a phone number, store a phone number in your phone book, or erase all of the phone numbers. After you select an option, use the key to scroll through the list of phone numbers. Press the O key to proceed. Last Calls Made Select this option to redial the phone number of any one of the last ten calls made. English 42 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 43 Tuesday, October 26, 1999 12:46 PM Last Calls Received i Press E. Select the Quick Access feature (W Received Calls?). Select this option to redial the phone number of any one of the last ten calls received. You can store any of the phone numbers in your phone book. AYou will only see numbers in the Last Calls Received list if you have Caller Line Identification. When you scroll through your last ten calls, each call appears with a call position number, for example:1+, 2-, 3+ ... 10+. A +
symbol indicates that you answered the call. A - symbol indicates that you did not answer the call. Press the O key to select a phone number. You can then scroll through and select one of the following options:
Call Number Select this option to call the phone number. Erase All Numbers This option erases all the numbers stored in your Last Ten Calls Made and Last Ten Calls Received lists. AThe Last Ten Calls lists will be erased when a new SIM is inserted in the phone. My Phone Number(s) This option allows you to access your cellular phone numbers so that you can retrieve or modify them when required. For example, if you have difficulty remembering your cellular phone number, store it with the name My Phone and then you will be able to retrieve the number as required. The My Phone Number(s) list is stored on your SIM card. When you select this item, the first location will be displayed. Use the key to scroll through the phone numbers stored. To enter or change a number, scroll to the location and press O. You will be prompted to enter a phone number and then a name. Press O to store the information. ADepending on your Cellular Service Provider, you may find that one or more of the entries in the My Phone Number(s) list will have been defined. You may not be able to change these predefined entries. Using the Options Menu 43 English m3gdr_en.bk : opt_menu.fm5 Page 44 Tuesday, October 26, 1999 12:46 PM Fixed Dialling AAvailability of the Fixed Dialling menu depends on the type of SIM card. This feature allows you to limit use (typically third-party use) of your phone to a predefined list of telephone numbers or, if you wish, to a list of country codes, area codes, or other prefixes of your choosing. When Fixed Dialling is switched on, the only numbers that can be dialled from your phone are those stored (or whose prefix is stored) in the Fixed Dial list. If you attempt to dial any other number (apart from an emergency number), the message Restricted will be displayed. To make a call when Fixed Dialling is switched on, either dial the number manually, or select it from the Fixed Dial list and press O. Up to 40 entries can be stored in the Fixed Dial list. The list is stored on your SIM card.
! This option may be affected by the Call Barring setting. View Fixed Dial List This option allows you to scroll through the numbers in the Fixed Dial list. When you find the number you want, press O to make the call. Setup Fixed Dialling This option allows you to switch Fixed Dialling on or off and to enter or change entries in the Fixed Dial list. You will be prompted to enter your PIN2 security code when you select this option. English 44 Using the Options Menu On Switches fixed dialling on. Off Switches fixed dialling off. Edit Entry Modifies or clears an entry in the Fixed Dial list. When you select this option, the first non-empty location in the list will be displayed. Scroll to the entry you want to change and press O. You will be prompted to edit the phone number and the name. To erase the entry, press C. Add Entry Adds a phone number and name to the Fixed Dial list. When you select this option you will be prompted to enter the phone number, name and a location number. If you do not specify a location number, it will be stored in the next available location. AWhen setting up your Fixed Dial list, you may want to reserve the first nine locations for phone numbers you wish to One-Touch Dial. See also One-Touch Dial Setting. Erase Entry Erases a phone number and name from the Fixed Dial list. The first entry in the Fixed Dial list will be displayed. Scroll to the entry you wish to delete and press O. m3gdr_en.bk : opt_menu.fm5 Page 45 Tuesday, October 26, 1999 12:46 PM One-Touch Dial Setting This option allows you to specify which Phone Book list can be One-Touch Dialled. To SIM Card Memory Switches One-Touch Dialling to your Personal Numbers list stored on your SIM card (locations 101 to 109). To Fixed Dial list AThis option is only available if you have Fixed Dialling. Switches One-Touch Dialling to your Fixed Dial list
(locations 1 to 9). Using the Options Menu 45 English m3gdr_en.bk : opt_menu.fm5 Page 46 Tuesday, October 26, 1999 12:46 PM Call Related Features Menu Show Battery Meter This option displays the approximate amount of battery capacity remaining, for example:
Number of Segments Approximate Charge Level 1 3 5 7 less than 5% (recharging needed) less than 20%
less than 60%
greater than 60%
i Press E. Select the Quick Access feature (G Battery Meter?). English 46 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 47 Tuesday, October 26, 1999 12:46 PM Restrict My Phone Number
'Restrict My Phone Number' is a network feature. You will need to subscribe to one of the two Caller Line Identification restriction features with your Cellular Service Provider. Show ID on Next Call Your phone number is sent with the next attempted call, after this your phone number will not be sent until you re-select this option. Restrict ID on Next Call i Press E. Select the Quick Access feature (c Restrict My ID?). Your phone number will not be sent with the next attempted call, after this your phone number will be sent with calls until you re-select this option. j Call Diverting Call diverting is a network feature. If your phone is unavailable, or you do not wish to receive calls, incoming calls can be diverted to other phone numbers. This option can be used to:
Divert all incoming Voice calls unconditionally. Divert incoming Voice calls whenever your phone is unavailable, busy, not reachable or not answered. Reset all diversion options to off. AYou cannot change the call divert settings when you are out of network coverage. After selecting any of the call divert options there will be a short delay while the phone asks the network for the current setting. Using the Options Menu 47 English m3gdr_en.bk : opt_menu.fm5 Page 48 Tuesday, October 26, 1999 12:46 PM Divert Voice Calls Detailed Diverting These options will enable you to divert Voice calls to different numbers, depending upon the current status of your phone. Each of the following detailed diverting options operate in the same way. Each option has two settings, On or Off. If you change the setting to On, you will be asked to enter a diversion phone number using the digit keys. ADetailed diversion settings are ignored while Divert All Voice Calls or Divert When Unavailable are On. If Busy This option will divert incoming calls if your phone is busy. If Not Reachable This option will divert incoming calls if your phone cannot be contacted by the network. If No Answer This option will divert incoming calls if you do not answer the call. This option will allow you to set your phone to Divert When Unavailable, Divert All Voice Calls or Detailed Diverting. Divert When Unavailable This option will enable you to divert all incoming Voice calls to a single number, whenever your phone is unavailable. The option has two settings, On or Off. If you change the setting to On, you will be asked to enter a diversion phone number using the digit keys. ASetting Divert When Unavailable to On will have the same effect as setting all Detailed Diverting options to On. AWhen On, Divert When Unavailable takes priority over detailed diversion settings. Divert All Voice Calls i Press E. Select the Quick Access feature (P Divert On/
Off?). This option will enable you to unconditionally divert all incoming Voice calls to a single number. The option has two settings, On or Off. If you change the setting to On, you will be asked to enter a diversion phone number using the digit keys. AWhen On, Divert All Voice Calls takes priority over all other Voice call diversion settings. English 48 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 49 Tuesday, October 26, 1999 12:46 PM j Call Waiting The Call Waiting menu item has two settings On or Off. If you select Off, you will be not be notified of waiting calls. The person trying to contact you will either receive the busy tone, or be diverted by the Detailed Diverting - If Busy option. If Call Waiting is On, you will be notified of a waiting call by an audible alert and by the message Call Waiting - Answer?. You can press the O key to accept the waiting call, or use the
$ and then the key to scroll to an alternative option and then press O. AIf you have Caller Line Identification, the callers number or name is displayed instead of the Call Waiting message. AAvailability of this feature depends on your service provider. j Call Barring Call barring is a network feature which can be used to selectively bar outgoing and incoming calls. If you change the barring setting, you may be asked to enter your barring password. There will be a short delay while the phone notifies the network of the new setting. When the change has been made by the network, the phone will display a confirmation message. The initial password will be supplied to you by your Cellular Service Provider when you subscribe to this service. AThis option may be affected by the Fixed Dialling setting. Bar Outgoing Calls After selecting this option, there will be a short delay while the phone asks the network for the current setting. Int'l Calls When selected, this option will bar outgoing international calls. Int'l Calls Except Home When selected, this option will bar outgoing international calls, except those to your home country. All Calls When selected, this option will bar all outgoing calls, except emergency calls. Off When selected, this option will disable all call barring for outgoing calls. Bar Incoming Calls After selecting this option, there will be a short delay while the phone asks the network for the current setting. When Roaming When selected, this option will bar incoming calls when you are roaming. You may wish to select this option, as some Cellular Service Providers charge an additional fee for receiving calls when you are roaming. All Calls When selected, this option will bar all incoming calls. Using the Options Menu 49 English m3gdr_en.bk : opt_menu.fm5 Page 50 Tuesday, October 26, 1999 12:46 PM Off When selected, this option will disable all call barring for incoming calls. Cancel All Barring This option can be used to set all Call Barring options to Off. Change Bar Password This option can be used to change the call barring password. After selecting this option, you will be asked to enter the current password. You will then be asked to enter, and then re-enter, your new, 4 digit, barring password. When the change has been made by the network, the phone will display a confirmation message. English 50 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 51 Tuesday, October 26, 1999 12:46 PM Messages Menu SMS Messages These are text messages that are sent specifically to and from your phone number. When an SMS message is received, your phone:
1 Makes three short alert tones. 2 Displays the o (messages) icon. 3 Stores the message for later viewing, if there is space. If there is not enough space, the o icon will flash. One or more messages must be removed before the message can be stored. Your Cellular Service Provider will transmit a message for a limited amount of time. If a memory location is not made available before the message is removed from the network, then you will not be able to receive or read it. 4 Message will then be displayed with the prompt; Read Now?
5 If O is pressed, the phone will enter the Received Messages browser and immediately display the new message. 6 If C is pressed the phone will return to the screen which was displayed prior to receipt of the message. 7 If any other key is pressed it will perform the function linked with that key. 8 If no key is pressed the display will time-out after 1 minute and return to the screen which was displayed prior to receipt of the message. Using the Options Menu 51 English Your phone supports the two GSM message features: Short Message Services (SMS) and Cell Broadcast. m3gdr_en.bk : opt_menu.fm5 Page 52 Tuesday, October 26, 1999 12:46 PM Cell Broadcast Messages These are general messages that your service provider broadcasts to all phones in a geographic area. Your phone can only receive a cell broadcast message when it is in idle mode. The messages are broadcast in numbered 'channels'. For example, channel 050 might be for local weather, traffic reports or stock market prices. Please contact your service provider for a list of available channels and the information they provide. While a broadcast message is scrolling across the display, you can stop and start it by pressing <. Press > to restart the message from the beginning. If you want to remove the message from the display, press C. AIf you need to use the < and > keys for their normal functions while you are receiving a cell broadcast message, you must first remove the message. When the message has scrolled across the display, the beginning of the message remains until one of the following occurs: you remove it; a new message arrives; or you leave the geographic area. For set up details, see Cell Broadcast. How to Read SMS Messages You can use the scroll key ( or ) to scroll through messages in either the Received Messages or Outgoing Messages lists. To display a specific message, enter the message number, for example press 5 to display the 5th message. If the message does not exist, Invalid Msg Number will be displayed. Alternatively, to display the next message, press O and select Go To Next Message. How to Create and Edit SMS Messages Use the Message Editor to create or modify text messages. When you enter the editor, the last message that was edited will be displayed. Press and hold C to clear the message and start a new one, or modify the message displayed. For an explanation of how to enter text, see How to Enter Alphabetic Characters. Press O once you have completed your message. You will then be presented with the following options:
Send Message - If you select this option you will be prompted for a phone number, enter the number and then press O to send the message. Store Message - Select this option to store your edited message in your Outgoing Messages list. AIf you dont store the message after it has been edited, you will lose all your changes as soon as you select another message to be edited. English 52 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 53 Tuesday, October 26, 1999 12:46 PM j Call Voicemail i Press E. Select the Quick Access feature (R Call Voicemail?). This option will make a call to the current voicemail number. You can also press f to call the Voicemail number. The voicemail number is entered using the Voicemail Number option in the Message Settings menu. j Received Messages Press the O key, when viewing any message, to enter the sub-menu. Delete Message This option will delete the currently viewed message. Reply to Message This option allows you to reply with a message. Return Call This option can be used to call the person who sent you the message, if their number has been included by the network, or a number that has been included in quotes in the message. i Press E. Select the Quick Access feature (K Read Edit Message Messages?). This option is used to view and manage any SMS messages that have been sent to your phone number. When selected, this option will display a message indicating the total number of messages and how many of these are new. If there are no messages No Messages will be displayed. If there are messages, the new messages will be displayed first, followed by the old. Repeated presses of the key will display the whole message, when it was sent and the phone number who sent it (if available). Once you have read a new message it will automatically become old. See How to Read SMS Messages for more information on navigating through the messages. This option allows you to use the Message Editor to edit the selected message and then to either send the modified message and/or store it in your Outgoing Messages list. See How to Create and Edit SMS Messages for more information on using the Message Editor. Go to Next Message This option will display the next received message. If you are currently reading the last message in your list then this option will take you back to the top of the list. Delete All Messages This option allows you to delete all received messages whether they have been read or not. AOnce deleted, messages are NOT retrievable. Using the Options Menu 53 English m3gdr_en.bk : opt_menu.fm5 Page 54 Tuesday, October 26, 1999 12:46 PM Outgoing Messages i Press E. Select the Quick Access feature (U Outgoing SMS?). This option is used to view and manage any outgoing messages. These messages will be stored on your SIM card. When you select this option, the total number of messages will be displayed followed by the first message in the list. AYou cannot send an outgoing message until the Message Service Centre number has been set. See Message Settings. Press the O key, when viewing any message, to enter the sub-menu. See How to Read SMS Messages for more information on navigating through the messages. Send Message This option allows you to add the destination phone number using a sub-menu. Using the scroll keys you can select:
Enter Number - this allows you to manually enter the phone number using the keypad and send the message. Find Entry by Name - this allows you to recall a phone number from the Phone Book by name and send the message (see Find Entry by Name in the Phone Book section). English 54 Using the Options Menu Find Entry by Location - this allows you to recall a phone number from the Phone Book by location and send the message
(see Find Entry by Location in the Phone Book section). Edit Message This option allows you to use the Message Editor to edit the selected message and then to either send the modified message or store it in your Outgoing Messages list. See How to Create and Edit SMS Messages for more information on using the Message Editor. Delete Message This option will delete the currently viewed message. Go to Next Message This option will display the next outgoing message. Message Editor i Press E. Select the Quick Access feature (a Message Editor?). The Message Editor is used to edit the currently selected message and then to either send the modified message or store it in your Outgoing Messages list. See How to Create and Edit SMS Messages for more information on using the Message Editor. m3gdr_en.bk : opt_menu.fm5 Page 55 Tuesday, October 26, 1999 12:46 PM Cell Broadcast This option determines the cell broadcast settings. See also Cell Broadcast Messages. On Select On to receive cell broadcast messages. You must then use Channel List to specify the appropriate channels. Off When you select Off, you do not receive any cell broadcast messages and you automatically delete all existing cell broadcast messages. Channel List Select either Channel Index or Delete All Channels. Channel Index This option allows you to select up to five different channels for receiving cell broadcast messages. If you modify a channel, you also remove any message associated with it. Use or to highlight the channel index you require (1-5) and then press O. The phone prompts you to Enter Channel. Type in the channel number and press O. The phone stores the channel details and returns you to the channel index list. Please contact your service provider for a list of available channels and the information they provide. Delete All Channels This option deletes all the channels and all the existing messages. Message Settings Voicemail Number This option is used to enter a phone number which will be used by the Call Voicemail option. If there is already a Voicemail Number, this will be shown in the display. This can be used, modified or deleted as desired. ARemember to add the + symbol and the appropriate country code prefix to the phone number. Service Centre Before you can send any messages you must use this option to enter your Message Service Centre number. This number is obtained from your Cellular Service Provider. If there is already a Message Service Centre number, this will be shown in the display. This can be used, modified or deleted as desired. ARemember to add the + symbol and the appropriate country code prefix to the phone number. Expiry Period You can use this option to specify the maximum time, in hours, that your unforwarded messages are to remain with the Message Service Centre before being deleted. When you select this option, the current expiry period will be displayed (the default is 24 hours). The maximum value you can enter is 10584, though the real limit will depend on your Message Service Centre. Using the Options Menu 55 English m3gdr_en.bk : opt_menu.fm5 Page 56 Tuesday, October 26, 1999 12:46 PM Outgoing Message Type This option is network dependent and can be used to specify the format of your outgoing messages. You can select from the following message types: Text (default), Fax, X400, Paging, E-Mail, ERMES or Voice. AYou do not need to select Voice to send messages to Voicemail boxes. English 56 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 57 Tuesday, October 26, 1999 12:46 PM Phone Setup Menu Using the Options Menu 57 English m3gdr_en.bk : opt_menu.fm5 Page 58 Tuesday, October 26, 1999 12:46 PM Select Phone Line i Press E. Select the Quick Access feature (d Switch Line 1/2?). This option allows you to switch between Line 1 and Line 2. AAvailability depends on the type and settings of the SIM card, and/or your subscription to this feature. AThis feature is not available when you are using the GSM 900 band. Adjust Ring Volume This option is used to set the incoming call ring toen volume. The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of your phone. i Press E followed by the volume button to either increase or decrease the ringer volume. Ringer On or Off Sets incoming call alert to either a ringer tone or a display message. English 58 Using the Options Menu j Set Ringer Tone This option sets the tone your phone will make when an incoming call is received on Line 1. Standard Tone Your phone makes a standard ringing tone. Single Ring Tone ... Music Tone When selected, your phone will produce one of these alternative ringer tones. AIf you select the Single Ring Tone option, the phone will only ring once when a call is received. j Set Ringer Tone 2 This option sets the tone your phone will make when an incoming call is received on Line 2. AThis option will not appear if you do not subscribe to Line 2. j Phone Lock i Press E. Select the Quick Access feature (H Lock Now?). This option is used to set, and change, the unlock code. The unlock code can be set to protect your phone from unauthorised use. It can be set to automatically lock your phone each time it is switched on. The unlock code is a four digit number which is set at manufacture to 1234. This can be changed at any time by using the 'change unlock code' option. m3gdr_en.bk : opt_menu.fm5 Page 59 Tuesday, October 26, 1999 12:46 PM Automatic Lock This option can be used to automatically lock your phone each time it is switched on. The option has two settings, On or Off. Lock Now This option can be used to immediately lock your phone. Once selected, your phone will be unusable until the unlock code is entered. Change Unlock Code This option is used to change the unlock code. After selecting this option, you will be asked to enter the current security code before you can proceed. You can now enter a four digit code to replace the old code. ABy pressing the $ key, you can access this option even when the phone is locked. Require SIM Card PIN This option is used to set, and change, the PIN code. The PIN code can be set to protect your SIM card from unauthorised use. If set to On, access to your SIM card will be restricted each time it is inserted or the phone is turned on. The option has two settings, On or Off. AIf the SIM card does not support PIN code disabling, these items will not appear. Change SIM PIN Code This option is used to change the SIM card PIN code. The 'Require SIM Card PIN' option must be set to On and you must enter the old PIN code before you can proceed. You will be asked to enter a new, four to eight digit code to replace the old PIN code. The new PIN code must be entered again as confirmation.
! If the PIN number is entered incorrectly three times in a row, your SIM card will automatically lock-up and the Blocked message will be displayed. Using the Options Menu 59 English m3gdr_en.bk : opt_menu.fm5 Page 60 Tuesday, October 26, 1999 12:46 PM Unblocking Your Phone If you receive the Blocked message you will need to enter an unblock code and key sequence before you can use the phone. AThe 8 digit PIN unblocking code will have been provided with your SIM card by your Cellular Service Provider. Enter the following key sequence to unblock your phone:
<<05<EO FOFO The new PIN code must contain four to eight digits.
! If this operation is performed incorrectly 10 times in a row, your SIM card will become permanently blocked. Change SIM PIN2 Code This option is used to change your PIN2 security code. When you select this option you must enter the old PIN2 security code before you can proceed. You will be asked to enter a new, four to eight digit code to replace the old PIN2 security code. The new PIN2 security code must be entered again as confirmation.
! If the PIN2 security code is entered incorrectly three times in a row, the Blocked message will be displayed. When the Blocked message is displayed, you are not allowed access to menu items that require you to enter the PIN2 code, for example Setup Fixed Dialling and Call Charge Settings. If you receive the Blocked message when you try to enter your PIN2 code, you will need to unblock and change the code using the following key sequence:
<<052<EO JOJO AThe 8-digit unblocking code will have been provided with your SIM card by your Cellular Service Provider.
! If the PIN2 unblocking operation is performed incorrectly 10 times in a row, your PIN2 code will become permanently blocked. j New Security Code The security code is used to control access to security and other options within the menus. This option is used to change the security code, which is set at manufacture to 000000. Once selected, you will be asked to enter the current security code before you can proceed. You will then be asked to enter a new, six digit code to replace the old security code. AIn order to safeguard your phone, you should change your security code from the factory setting as soon as possible. English 60 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 61 Tuesday, October 26, 1999 12:46 PM j Extended Menus i Press and hold $. Extended Menus will be temporarily activated until you exit the Options menu. This option is used to switch the extended menus on or off. If the extended menu option is switched off, you will not be able to access any of the extended features. The option has two settings, On or Off. j Language Selection This option is used to change the language for display messages. The option has multiple settings. When you select a language, all further display prompts and help messages will be in the selected language. Battery Saving Mode This option can help you to conserve battery power by activating DTX (Discontinuous Transmission), turning the status indicator off, and deactivating the backlight for incoming Cell Broadcast messages. The option has two settings, On or Off. j Select Keypad Tones This option allows you to change or disable tones you hear when you press a key. The option has three settings, Normal Tones, Single Tone or No Tones. Using the Options Menu 61 English m3gdr_en.bk : opt_menu.fm5 Page 62 Tuesday, October 26, 1999 12:46 PM Phone Status Status Review This option can be used to view the current setting of menu options. When selected, your phone will display a list of menu items which have been changed from the default setting. Press the
$ key to view the next item. Master Reset
! This option should be used with caution. This option is used to restore certain phone options to their original settings. When selected, you will be asked to enter the security code. Once entered, the master reset option will perform the following operations:
Cancel Automatic Answer, Audible Call Timers, In-Call Display Meter, Battery Save (DTX), Automatic Lock and Cell Broadcast. Return Language Selection to Original. Restore Keypad Tones to Normal, Ringer Tones to Standard, SMS Alert Tones to Standard, Volume Level to Medium and Network Search frequency to Medium. Restore Extended Menus to their default settings. Return the band selection to the default setting. Master Clear
! This option should be used with extreme caution, for example it will clear all the Phone Book entries. This option is used to restore certain phone options to their original settings. When selected, you will be asked to enter the security code. Once entered, the master clear option will perform the same operations as 'Master Reset', plus the following operations:
Clear the Last Calls Made and Last Calls received list Clear the Message Editor Reset the Resettable Call Timers. Master Clear does not clear the:
Fixed Dial list My Number(s) list Charge Meters Received and Outgoing Messages list Voicemail number SMS Service Centre number Lifetime timer. English 62 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 63 Tuesday, October 26, 1999 12:46 PM Network Selection Menu Network Selection In order for the phone to make and receive phone calls, it must register with one of the available networks. The phone can handle any of the following types of network: GSM 900, GSM 1800 and combined GSM 900/1800. Your phone automatically searches for the last network used. If, for any reason, this network is unavailable, your phone will attempt to register with a new network. When your phone needs to register with a new network, it will generate a sorted list of networks.The network list is sorted in the following order:
The Home network. Networks from a preferred list. A random list of other networks found above a certain signal strength. Any forbidden networks, stored in the SIM card, will not be included in the sorted list. Using the Options Menu 63 English m3gdr_en.bk : opt_menu.fm5 Page 64 Tuesday, October 26, 1999 12:46 PM Change Band i Press E. Select the Quick Access feature ( Change Band?). The country where you purchased your phone determines the default band that it uses. When you travel abroad, you must remember to change to an appropriate band. Use this option to change the band of operation for your phone. The country where you purchased your phone also determines which of the following options are available:
GSM 900/1800 (referred to as 900/1800) GSM 900 (referred to as 900) GSM 1800 (referred to as 1800) When you select Change Band, your phone prompts you to View Options?. Press O and then use the key to scroll through the options. Press O to select the band you require. When you select a new band, your phone displays the confirmation message Changed to XXX. and then automatically searches all the available networks. Your phone then attempts to register with a preferred network within the selected band. If you re-select the currently selected band, the confirmation message still appears but the band is not changed and the phone does not attempt to register with any other network. AYou cannot change bands during a call. If you attempt to change bands during a call, your phone displays Cant Access Network and then returns to the in-call display. Available Networks When selected, this option will scan to see which networks are operating in your current location. When the scan is complete, press the key to scroll through the list. When you see a network you wish to register with or store in your preferred list, press the O key. You will now enter the 'Register Now' and
'Make Preferred' sub-menu. Register Now Once selected, your phone will try to register with the selected network. If the registration fails, your phone will try to register in the normal way. Make Preferred Once selected, you will be asked where the selected network is to be located in the preferred list. Network Search These options determine how often your phone tries to register with a network and how the attempt is made. Registration Preferences This option determines how the phone tries to register with a network. The option has two settings, Automatic Search or Manual Search. English 64 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 65 Tuesday, October 26, 1999 12:46 PM Automatic Search Mode In the automatic mode, the phone will try to register with the first network in the sorted list. If this is successful, your phone will display the network name and then enter the standby mode. If registration is unsuccessful with one network in the list, your phone will try the next listed network. If your phone fails to register with any of the listed networks, it will start at the beginning of the list after a preset period. The preset period is determined by the 'Frequency Of Search' option. Manual Search Mode In the manual mode, the phone will present you with the sorted list of networks. Use the and O keys to select one network from the list. Your phone will try to register with the selected network. If this is successful, the phone will display the network name and then enter the standby mode. If registration is unsuccessful, your phone will present the list again after a preset period. The preset period is determined by the 'Frequency Of Search' option. Frequency of Search This option is used to determine how long your phone waits before attempting to re-register after a registration attempt has failed. The option has the following settings: Slow Search, Medium Search, Fast Search or Continuous Search.
! Fast and Continuous Search may use up a significant amount of battery power. j Preferred Networks Add Network to List This option enables you to add networks to your preferred list. When selected, the 'Choose From Available' option will scan to see which networks are operating in your current location. When the scan is complete, press the key to scroll through the list. When you see a network you wish to store in your preferred list, press the O key. You will be asked where the selected network is to be located in the preferred list. The 'Choose From Known' option will, when selected, present you with a preset list of networks. Press the key to scroll through the list. When you see a network you wish to store in your preferred list, press the O key. You will be asked where the selected network is to be located in the preferred list. Select the 'Add New Network Code' option to enter network codes directly. Once entered, you will be asked where the network is to be located in the preferred list. Show List of Networks This option is used to display the networks you have stored in your preferred list. In addition, pressing the O key will select the currently displayed entry and enter a move/delete sub-menu. When 'Move to New Location' is selected you will be asked to enter a new location for the selected network. When selected, 'Delete Selection' will remove the selected network from the preferred list. Using the Options Menu 65 English m3gdr_en.bk : opt_menu.fm5 Page 66 Tuesday, October 26, 1999 12:46 PM Find New Network i Press E. Select the Quick Access feature ( Find New Network?). When selected, the phone will try to register with a network in the normal manner, with one exception. When the registration attempt is made, your current network will be excluded from the list of those available. If the attempt fails, your phone will then try to re-register with the previous network. English 66 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 67 Tuesday, October 26, 1999 12:46 PM Call Meters Menu Call Metering Your phone has an internal metering system which can be used to provide you with individual and total call times or costs. ACall cost information is only available if you receive the Advice of Charge service. If you do not receive this service, then only time meters are available. The meter can be displayed during a phone call and audible tones can be generated to indicate the passage of call time. Your phone can handle values up to 21 digits long, although during calls it can only display the last 12 digits. If the value exceeds 21 digits, then Too Large is displayed. In addition, you can set a maximum charge limit so that your phone will monitor either the number of units used or the call cost, and then not allow the limit to be exceeded. Show Call Charges This feature allows you to display the cost of your calls or the amount of credit remaining. The figures are in phone units or currency depending on the setting of the Set Charge Type option. AShow Call Charges is only available if you receive the Advice of Charge service. Using the Options Menu 67 English m3gdr_en.bk : opt_menu.fm5 Page 68 Tuesday, October 26, 1999 12:46 PM Show Last Call Show Last Call i Press E. Select the Quick Access feature (X Call i Press E. Select the Quick Access feature (Y Call Charge?). Timer?). Displays the cost of your last chargeable call. Displays the duration of your last call. Total For All Calls Total For All Calls Displays the cost of all your chargeable calls since the charge meters were reset to zero using the Reset Call Charges option. Displays the duration of all your calls since the time meter was reset to zero using the Reset All Timers option. Credit Remaining Reset All Timers i Press E. Select the Quick Access feature ( Show Credit?). Displays the difference between your total call costs and the limit specified by the Set Total Charge Limit option. If there is no limit, No Charge Limit Set will be displayed. Show Call Timers This feature allows you to display the duration of your calls and to reset your time meters to zero. If you receive the Advice of Charge service then all calls are timed. If you do not receive the Advice of Charge service then, depending on the model, either all calls or only outgoing calls are timed. Sets the resettable time meters to zero. The Lifetime Meter is not resettable. j Set Audible Call Timers Your phone provides two programmable audible call timers:
The 'Single Alert Timer' will sound a beep just once during a call, after a preset time has elapsed. The 'Repetitive Timer' will sound regular beeps during a call, at preset intervals. In both cases, the timers will sound their beeps ten seconds before the end of the programmed time. Set In-Call Display This feature allows you to specify whether the time or charge meters are displayed during a call. If you do not have the Advice of Charge service, then only the time meter is available. AIf a total charge limit has been set, then the in-call display always shows your remaining credit. English 68 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 69 Tuesday, October 26, 1999 12:46 PM Show Time Per Call Set Total Charge Limit This option is used to display the time meter during calls. If you receive the Advice of Charge service, only the chargeable calls will be displayed. Show Charge Per Call, Show Total Call Charges AThese menu items are only available if you receive the Advice of Charge service. These options are used to display the call charges meter during and after chargeable calls. The meter shows phone units or currency depending on the setting of the Set Charge Type option. No In-Call Display This option switches off in-call display of the charge/time meter. Call Charge Settings This feature allows you to customise your Advice of Charge settings. You will be prompted to enter your PIN2 security code before you can access the options. AThis menu item is only available if you receive the Advice of Charge service. Reset Call Charges This option resets your charge meters to zero. This option sets the maximum limit for call charges; once this limit has been reached, the network will refuse any further chargeable calls. If you switch the charge limit On, you will be prompted to enter a new limit. Enter the amount as either units or currency depending on the setting of the Set Charge Type option. Units must be entered as whole numbers. Once a limit is set, the in-call display will show the remaining credit. When you reach your last two minutes, the warning message Approaching Charge Limit will be displayed and a warning alert will sound. The sound will be repeated when one minute remains. When the limit is reached the message Charge Limit Reached will be displayed and you will not be able to make any more chargeable calls. Once the limit is reached the Total Charge Limit will need to be reset or switched off before any chargeable calls can be made. Select Off to switch off the charge limit. Using the Options Menu 69 English m3gdr_en.bk : opt_menu.fm5 Page 70 Tuesday, October 26, 1999 12:46 PM Set Charge Type This option defines whether charge information is displayed as either phone units or currency. Units Sets the charge type to phone units. Currency Sets the charge type to currency. You will be prompted to enter the Currency Name. Enter a 3-character notation, for example GBP for the UK, DEM for Germany or FFR for France. You will then be prompted for the Charge Per Unit. Enter the amount and press O. Lifetime Timer This option is used to display the total time of all calls made on your phone. This meter can not be reset, the Reset All Timers, Master Reset or Master Clear options have no effect. English 70 Using the Options Menu m3gdr_en.bk : opt_menu.fm5 Page 71 Tuesday, October 26, 1999 12:46 PM Accessory Setup Menu Your phone can also be linked to external microphones and speakers for handsfree operation. j Automatic Answer This option allows your phone to automatically answer an incoming call after two rings. This option has two settings, On or Off. Availability depends on the type of car kit installed. Using the Options Menu 71 English m3gdr_en.bk : opt_menu.fm5 Page 72 Tuesday, October 26, 1999 12:46 PM English 72 Using the Options Menu m3gdr_en.bk : qkaccess.fm5 Page 73 Tuesday, October 26, 1999 12:46 PM Using the Quick Access Menu Although the features in your phone are available through easy access menus, some of the most commonly used features are also available in the Quick Access menu. Each feature in the menu is allocated a number from 1 to 9. To use a Quick Access feature, press the quick access key (E) followed by the number of the feature, or press [ or ] to scroll through the menu and then press O. You can change the features, and the positions of the features, available in the Quick Access menu - see Customising the Quick Access Menu. Each Quick Access feature is represented by an icon as well as the feature name. The currently selected icon is shown with a dark background. B Find Name?
You will be prompted to Enter Name. Enter the first three characters of the name and press O. The first matching entry in the Phone Book will be displayed. Press O to call the number. D Find Location?
You will be prompted to Enter Location. Enter the location number and press O. The first matching entry in the Phone Book will be displayed. Press O to call the number. AThe menu shown above represents the default setting supplied with your phone. Using the Quick Access Menu 73 English m3gdr_en.bk : qkaccess.fm5 Page 74 Tuesday, October 26, 1999 12:46 PM T Add to SIM?
You will be prompted to enter a phone number and then a name. AIf you already had a number displayed, it will automatically be re-displayed when you select this feature. The number will be stored in the next available SIM card location. See Add Entry for more information. R Call Voicemail?
Your phone will make a call to your voicemail number. AYou must have defined a Voicemail number in order to use this feature. See Call Voicemail for more information. G Battery Meter?
A bar graph indicating the approximate battery charge level will be displayed. The more bars displayed, the greater the charge level. See Show Battery Meter for more information. H Lock Now?
Immediately locks your phone, you will not be able to use your phone until the unlock code is entered. See Phone Lock for more information. J Mute Phone?
Temporarily turns the microphone off during a phone call. Reselect this option to resume your conversation. N Adjust Ring?
This option is used to display and to set the incoming call ring tone volume. g Ringer On/Off?
This option allows you to turn off your phones ringer. K Read Messages?
Your newest message will be displayed; you can then read, delete and edit messages as normal. See Received Messages for more information. U Outgoing SMS?
Your newest message will be displayed; you can then read, send, delete and edit messages as normal. See Outgoing Messages for more information. a Message Editor?
The last message that was edited will be displayed. Press and hold C to clear the message and start a new one, or modify the message displayed. See How to Create and Edit SMS Messages for more information. W Received Calls?
Displays the first entry in the Last Calls Received list. You can scroll through the list and call the numbers as normal. See Last Calls Received for more information. X Call Charge?
Displays the cost of your last chargeable call. See Show Call Charges for more information. English 74 Using the Quick Access Menu m3gdr_en.bk : qkaccess.fm5 Page 75 Tuesday, October 26, 1999 12:46 PM Access Internet?
AThis is a network and subscription dependent feature. Contact your service provider for details about the mobile internet services based on the WAP (Wireless Application Protocol) technology that they provide. Use this option to start your mobile internet session. See Access Internet for more information. Y Call Timer?
Displays the duration of your last chargeable call. See Show Call Timers for more information. Show Credit?
Allows you to quickly display the Credit Remaining. AThis will only show the credit remaining if you receive the Advice of Charge service. c Restrict My ID?
Your phone number will not be sent with the next attempted call; after this your phone number will be sent until you reselect this option. Find New Network?
Allows you to quickly search for a new network. P Divert On/Off?
Unconditional voice call diversion will be switched either on or off depending on the current setting. AYou must have defined a diversion number using the Divert All Voice Calls option in the Call Diverting menu in order to use this feature. AYou cannot switch call diverting on or off if you are outside network coverage. Change Band?
Use this option to change the band of operation for your phone. See Network Selection Menu for more information. Using the Quick Access Menu 75 English m3gdr_en.bk : qkaccess.fm5 Page 76 Tuesday, October 26, 1999 12:46 PM Customising the Quick Access Menu You can change the features in the Quick Access menu to suit your personal preferences. To customise the menu:
1 Press E and scroll to the menu item you wish to change. 2 Press and hold O to access the list of features available. The currently selected feature will be displayed. 3 Scroll through the list until you find the feature you wish to store in the Quick Access menu; press O. 4 Completed will be displayed to confirm that the feature has been stored. Last Calls Received Last Call Charge Last Call Timer Credit Remaining Restrict My ID Find New Network Divert Voice Call Change Band Access Internet The items in the Quick Access list will appear in the following order:
Find by Name Find by Location Add Entry to SIM Call Voicemail Battery Meter Phone Lock Now Phone Mute On or Off Ring Volume Ringer On or Off Read Messages Outgoing Messages Message Editor English 76 Using the Quick Access Menu m3gdr_en.bk : radio.fm5 Page 77 Tuesday, October 26, 1999 12:46 PM Starting and Stopping the Radio Press the radio button on the right-hand side of your phone to start and stop the radio. The display will now show the current channel. Adjusting the Volume To adjust the radio volume, press the volume button on the left-
hand side of your phone. Once the volume button is pressed, a volume meter will appear on the display for a few seconds. The display will then revert back to its idle mode showing the station frequency followed by FM. Changing Channels Once the radio is on, channels can be selected by pressing either
or to the next available station. Your current channel will be shown at the bottom of the display. While the radio is seeking a new channel the message Seeking will be displayed. Fine Tuning To fine tune a radio channel, press either < or > to adjust the frequency by 1MHz. Using the FM Radio Storing and Recalling Preset Channels To store preferred channels as presets, select the required frequency as described above and hold the desired storage location (1-9) by pressing the appropriate key (1 - 9). Once stored, you will see the message Stored followed by the number (1-9) of the preset. After three seconds, the display will revert back to the idle screen. You can change radio stations to one of the presets by pressing the associated key (1 - 9). Receiving a Call If a call comes in while you are playing the radio, an alert tone is sent to the right (marked red) earpiece. To accept the call, press O or radio button. This will turn the radio off. To reactivate the radio, press the radio button. If you do not want to take the call, press the volume button to stop the alert press C. AThe only alert notification will be heard in the right (marked red) earpiece on the stereo headset. Receiving an SMS Message If an SMS message comes in while you are playing the radio, an alert tone is sent to the ear piece. To accept the message, press O or radio button. This will turn the radio off. To reactivate the radio, you must press the radio button. If you do not wish to receive the incoming message, press the volume button to stop the alert tone or press C. Using the FM Radio 77 English m3gdr_en.bk : radio.fm5 Page 78 Tuesday, October 26, 1999 12:46 PM English 78 Using the FM Radio m3gdr_en.bk : access.fm5 Page 79 Tuesday, October 26, 1999 12:46 PM The following accessories have been designed to work with your phone. Additional accessories may be available and are packaged separately. Please refer to your local service provider or retail outlet for more information. AThe use of wireless devices and their accessories (devices) may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these devices. APlease ensure that when using any external connector with your phone that you are certain that it is fully inserted. Power Adapter The Power Adapter (charger) connects to the phone. When connected directly to the phone, it charges the battery and also provides dead battery operation. The Power Adapter requires an appropriate Adapter Plug. Vehicular Power Adapter The Vehicular Power Adapter connects to your phone and allows you to charge your phone's battery while driving. When the phone is in use, the adapter overrides the battery therefore preserving battery life. The adapter also provides dead battery operation. Personal Handsfree System The Personal Handsfree System allows you to use your phone handsfree. Accessories Belt Clip The Belt Clip holds the phone while being worn on your belt. AThe holster has been designed for your convenience and is not meant to secure your phone under all circumstances. Headset The convenient headset provides both an earphone and microphone in one small accessory for simple handsfree and private telephone conversations. The headset plugs directly into the jack on the top left side of your phone, so that you can wear your phone and move freely. Stereo Headset The dual earpiece stereo headset and microphone allows for simple handsfree and private conversations, or your choice of FM Stereo sounds. The earpieces are individually marked with an "R"
on the right earpiece (marked red) and an "L" on the left earpiece (marked blue). The headset plugs directly into the jack on the top left side of your phone, so that you can wear your phone and move freely. For more information on the use of the FM Stereo feature and the Stereo headset please reference Using the FM Radio. AIf you receive a call while using the FM Stereo feature an alert will only be heard in the Right (marked red) earpiece on the Stereo headset Accessories 79 English m3gdr_en.bk : access.fm5 Page 80 Tuesday, October 26, 1999 12:46 PM English 80 Accessories m3gdr_en.bk : notes.fm5 Page 81 Tuesday, October 26, 1999 12:46 PM What to do if... You cant switch your phone on You cant make calls You cant receive calls You cant receive calls through your stereo headset Your phone wont unlock Your PIN is blocked Your PIN2 is blocked Your SIM card wont work Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See Important Battery Information. Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in a building, move closer to a window. Check the Network Selection settings. Try Manual Selection, or try another network. See Network Search. Check your Operator coverage map. Is Restricted displayed? Check the Call Barring and Fixed Dialling settings. Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your Service Provider. See Set Total Charge Limit. Has a new SIM card been inserted? Check that no new restrictions have been imposed. Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in a building, move closer to a window. Check the Call Diversion and Call Barring settings. Check the Ringer settings. If it is off, there is no audible alert. See Ringer On or Off. Check your connections and ensure that they are inserted fully. The incoming call alert will only be sent to the red or right earpiece on the stereo headset accessory. Have you inserted a new SIM card? Enter the new PIN code. See Entering Your SIM Card PIN Code. Do you have a replacement phone? Enter the default phone unlock code - 1234. Have you forgotten the unlock code? Press $ to change the unlock code (you will need your security code). Enter the PIN unblocking code supplied with your SIM card (see Unblocking Your Phone). Enter the PIN2 unblocking code supplied with your SIM card (see Change SIM PIN2 Code). Is the card inserted the right way round? See SIM Card Insertion/Removal. Is the gold chip visibly damaged or scratched? Return the card to your Service Provider. Check the SIM contacts. If they are dirty, clean them with an antistatic cloth. What to do if... 81 English m3gdr_en.bk : notes.fm5 Page 82 Tuesday, October 26, 1999 12:46 PM The battery wont charge The battery icon and meter are missing The battery drains faster than normal You cant cancel Call Diverting or Call Barring The o symbol is flashing You cant make international calls English 82 What to do if... Check the alignment of the batteries to ensure that they are installed properly. Make sure that the positive
(+) and negative (-) marks on the batteries match the markings on the phone. Check the charger. Is it properly connected? Are its contacts clean and dry? The phone should provide a beep-tone and the display should read Charging Battery within two minutes from the transformer being installed. See Your Battery. Check the battery contacts. Are they clean and dry?
Check the battery temperature. If it is warm, let it cool before recharging. Is it an old battery? Battery performance will decline after several years use. Replace the battery. Are you using a Motorola original battery? See Your Battery. Are you using a Motorola original battery? Your charging system may not be able to communicate with your battery. See Your Battery. Are you in an area of variable coverage? This uses extra battery power. Is it a new battery? A new battery will need two to three charge/discharge cycles to attain normal performance. See Charging a New Battery Is it an old battery? Battery performance will decline after several years use. Replace the battery. Is it a battery that hasnt been completely discharged? Allow the battery to fully discharge (until the phone turns itself off) and then charge the battery overnight. Check that the Frequency Of Search feature in the Network Selection menu has not been set to Fast or Continuous. See Network Search. Check that the Battery Saving Mode feature has not been set to Off. Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery performance is significantly reduced. Wait until you are in an area with good network coverage and try again. There is not enough memory available to store another SMS message. Use the Messages menu to delete one or more existing messages. Some Service Providers automatically bar the ability to make international calls. Contact your Service Provider. Have you included the relevant codes? Press and hold the 0 key to display the international dialling prefix (+) and then enter the appropriate country code followed by the phone number. m3gdr_en.bk : notes.fm5 Page 83 Tuesday, October 26, 1999 12:46 PM Your Personal Handsfree System is not operating properly Check all of the connections and make sure that they are inserted correctly. Check the connections to make sure that they are fully inserted. What to do if... 83 English m3gdr_en.bk : notes.fm5 Page 84 Tuesday, October 26, 1999 12:46 PM English 84 What to do if... m3gdr_en.bk : m3gdr_en.IX Page 85 Tuesday, October 26, 1999 12:46 PM A Access Internet .....................................34 Accessories ..........................................79 Accessory setup menu ..........................71 Add entry To SIM card memory ................. 41, 74 Adjust ring volume ...............................58 Automatic answer ................................71 Automatic lock .....................................59 Automatic redial ..................................24 Available networks ...............................64 B Bar incoming calls ................................49 Bar outgoing calls ................................49 Batteries Charging .........................................17 Installing the Batteries ......................17 Low battery warning ........................19 Maintaining .....................................18 Removing ........................................18 Battery charge indicator .......................16 Battery meter ................................ 46, 74 Battery saving mode .............................61 Blocked message ........................... 23, 60 Buttons Volume ...........................................15 Index Conference Call ...................................28 Call Waiting ....................................31 End Active And Held ........................28 Hold Call .........................................27 Make a New Call .............................27 Reconnect .......................................28 Reconnect Held Call ........................28 Restrict My Number .........................27 Split Call ..........................................28 Switch Calls .....................................28 D Delete Last ten calls ....................................43 Message ................................... 53, 54 Phone book entries ..........................41 Detailed diverting .................................48 Dialling phone book numbers ..............25 Display .................................................15 Display characters ................................40 Displaying your own phone number ..............................43 DTX .....................................................61 C Call charge settings ..............................69 Call diverting ................................. 47, 75 Call holding .........................................28 Call metering .......................................67 Call meters menu .................................67 Call related features menu ...................46 Call timers ............................................68 Call Transfer .........................................31 Call Voicemail ......................................53 Call waiting ..........................................28 Calling a number .................................24 Cancel all diverting ...............................75 Capacity ...............................................42 Checking battery capacity ................46 Cell broadcast ......................................55 Battery saving mode ........................61 Messages ........................................52 Change band ................................ 64, 75 From the default
(900/1800) ............................. 64, 75 Change bar password ..........................50 Change SIM PIN2 code .........................60 Change unlock code ............................59 Changing radio channels ......................77 Characters ...........................................40 Charge meters Resetting .........................................69 Check capacity .....................................42 Index 85 English m3gdr_en.bk : m3gdr_en.IX Page 86 Tuesday, October 26, 1999 12:46 PM E Earpiece connector .............................. 16 Editing messages ................................. 52 Emergency calls ................................... 25 Ending a phone call ............................. 26 Entering characters .............................. 39 Erase name and number ...................... 41 Extended menus ..............................5, 61 F Fault finding ........................................ 81 Find entry by location ....................41, 73 Find entry by name ........................40, 73 Find new network ............................... 66 Fixed dialling ....................................... 44 Calling numbers ............................. 44 Setting ............................................ 44 FM Radio button ................................. 15 H Hold Call ............................................. 27 I In use symbol ...................................... 16 Initiating Transfer Call ......................... 31 Installing the Batteries ......................... 17 International phone calls ..................... 25 Internet Accessing ....................................... 34 Internet service alerts ........................... 36 English 86 Index L Language selection ...............................61 Last Calls Received ...............................43 Last ten calls ..................................42, 74 Lifetime timer .......................................70 Lock now ......................................59, 74 Locking the keypad ..............................23 Low battery warning ............................19 M Making a phone call .............................24 Master clear .........................................62 Master reset .........................................62 Menu Access Internet ................................34 Menus Accessory setup menu .....................71 Call Diverting menu .........................47 Call meters menu ............................67 Call related features menu ...............46 Extended menu .................................5 Messages menu ...............................51 Network selection menu ..................63 Options menu ..................................33 Personalised menus ...........................5 Phone Book menu ...........................38 Phone setup menu ...........................57 Quick Access menu ..........................73 Send Messages menu ......................54 Short menu .......................................5 Message editor ..............................54, 74 Message settings ..................................55 Messages Call holding/call waiting messages ..........................29 Cell broadcast messages ..................52 Creating and editing ........................52 Reading SMS messages ...................52 Sending SMS messages ...................54 Messages menu ...................................51 Mobile Internet Display features ...............................34 Editing Text .....................................36 Ending the session ...........................36 Internet service alerts .......................36 Making and Receiving Calls .............36 Starting the session .........................36 Summary of keys .............................37 My phone number(s) ............................43 N Names Entering ..........................................39 Network search ....................................64 Network selection menu ......................63 Networks Automatic search .............................65 Change band ........................... 64, 75 Finding new networks .....................66 Manual search .................................65 New security code ................................60 m3gdr_en.bk : m3gdr_en.IX Page 87 Tuesday, October 26, 1999 12:46 PM O One-touch dial setting ..........................45 One-touch dialling ...............................24 Options menu ......................................33 Outgoing messages ....................... 54, 74 P Pauses Inserting into phone numbers ..........25 Personal numbers .................................40 Personalised menu .................................5 Phone book Call number ....................................41 Deleting/erasing entries ...................41 Dialling phone book numbers ..........25 Modify name or number ..................41 Preventing access to ........................42 Storing numbers - see Add Entry ......41 Phone calls Automatic redial ..............................24 Dialling phone book numbers ..........25 Emergency calls ...............................25 Ending .............................................26 International ....................................25 Making ............................................24 One-touch dialling ...........................24 Receiving .........................................26 Phone setup menu ...............................57 Phone status ........................................62 PIN code Entering ..........................................23 Setting and changing ......................59 PIN2 code ............................................60 preset channels ....................................77 Prevent access (to Phone Book) ............42 Q Quick access menu ...............................73 Customising ....................................76 R Radio adjusting the volume .......................77 changing channels ...........................77 Fine tuning ......................................77 preset channels ...............................77 receiving a call .................................77 Receiving an SMS message ..............77 starting and stopping ......................77 Radio button ........................................15 Radio volume .......................................77 Reading SMS messages ........................52 Received messages ...............................53 Receiving a call in Radio mode .............77 Receiving a phone call ..........................26 Receiving an SMS message in Radio mode ...................................77 Redialling the last number called ..........24 Removing your batteries .......................18 Require SIM card PIN ............................59 Restrict My Number .............................27 Restrict my phone number ............ 47, 75 Return call ............................................53 Ring tones ............................................58 S Security code Changing ........................................60 Select Phone Line .................................58 Sending SMS messages ........................54 Service centre ......................................55 Set in-call display .................................68 Set Ringer Tone ...................................58 Set Ringer Tone 2 ................................58 Setup fixed dialling ..............................44 Short menu ............................................5 Short message service symbol ..............16 Show battery meter ...................... 46, 74 Show call charges ......................... 67, 74 Show call timers ............................ 68, 75 Show Services ......................................42 Signal strength symbol .........................16 SIM card Insertion/removal .............................20 PIN code ................................... 23, 59 PIN2 code ........................................60 SMS messages .....................................51 Special keys .........................................15 Split Call ..............................................28 Starting and stopping the radio ............77 Status indicator Battery saving mode ........................61 Status review .......................................62 Switch Calls .........................................28 Symbols ...............................................15 Index 87 English m3gdr_en.bk : m3gdr_en.IX Page 88 Tuesday, October 26, 1999 12:46 PM T Timers ................................................. 68 Tones Setting ringer tones ........................ 58 Transfer Call ........................................ 31 Troubleshooting .................................. 81 Tuning the radio .................................. 77 Turn Mute On or Off ........................... 28 U Unblocking your phone ....................... 60 Unconditional call diversion ................. 75 Unlock code Setting and changing ...................... 58 V Voicemail Volume Number .......................................... 55 Adjusting the earpiece and keypad volume ............................. 15 Adjusting the ringer volume ............ 58 Buttons ........................................... 15 radio ............................................... 77 W What to do if... ................................... 81 English 88 Index TBA
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2000-03-24 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2000-03-24
|
||||
| 1 | Applicant's complete, legal business name |
Motorola Mobility LLC
|
||||
| 1 | FCC Registration Number (FRN) |
0004321311
|
||||
| 1 | Physical Address |
Motorola Mobility LLC
|
||||
| 1 |
Chicago, Illinois 60654
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| n/a | ||||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
IHD
|
||||
| 1 | Equipment Product Code |
T6ZB1
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J******** N********
|
||||
| 1 | Title |
Director Product Compliance
|
||||
| 1 | Telephone Number |
847-6********
|
||||
| 1 | Fax Number |
847-6********
|
||||
| 1 |
n******@motorola.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCS portable phone | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power listed is EIRP. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| n/a | ||||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 1.1000000 | 0.1000000000 ppm | 250KGXW | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC