all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Exhibit 8 Users Manual | Users Manual | 2.64 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report |
1 2 3 | Exhibit 8 Users Manual | Users Manual | 2.64 MiB |
INSTRUCTION MANUAL A preliminary draft of the Users Manual follows this page. The text on the following three pages will be added to the user manual. APPLICANT: MOTOROLA,INC. FCC ID: IHDT56GR1 EXHIBIT 8 Specific Absorption Rate Data SAR Data This model wireless phone meets the governments requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR SAR Data level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 1.00 W/kg, and when worn on the body, as described in this user guide, is 0.64 W/kg.
(Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association
(CTIA) Web site:
http://www.phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site:
http://www.cwta.ca 1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. 2. SAR Data encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Notice To Users FCC NoticeMotorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3). If your mobile device or accessory has a USB connector, or is otherwise considered a computer peripheral device whereby it can be connected to a computer for purposes of transferring data, then it is considered a Class B device and the following statement applies:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is FCC Notice motorola W215 MOTOMANUAL www.motorola.com HELLOMOTO Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola W215 wireless phone. D Earpiece Listen to your voice calls & messages. R Left Soft Key Performs functions identified by left display prompt. Send/Answer Key Make and answer calls. Press when idle to see the list of recently dialed calls. A Power Connector Port Port to insert the charger. Menu Key Open a menu when you see M in the display. Right Soft Key Performs functions identified by right display prompt Navigation Key Press S up and down to scroll through lists, left and right to adjust volume of ringtone style. Note: Your phone may not appear exactly as the phone image in this picture; however, all key locations, sequences, and functions are the same. F Power/End Key Press and hold to turn the phone on/off. Press and release to end phone calls, exit menu system. Microphone T 1 Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third-party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in Motorola products may not be modified, reverse-
engineered, distributed, or reproduced in any manner to the extent allowed by law. Fishermen, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third-party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Part number: 68XXXXX167-O Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com Certain mobile phone features are dependent on the capabilities and settings of your service providers network. Additionally, certain features may not be activated by your service provider, and/or the providers network settings may limit the features functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this users guide, are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners. Motorola, Inc., 2006. Caution: Changes or modifications made in the radio phone, not expressly approved by Motorola, will void the user's authority to operate the equipment. 2 check it out!
D Power Jack VGA 4x ZOOM Lanyard Attachment Camera Lens Battery Compartment R Headset Jack Insert the headset accessory for handsfree use. A Speaker Note: Your phone may not appear exactly as the phone image in this picture; however, all key locations, sequences, and functions are the same. F T 3 contents R D check it out!. 3 Safety and General Information . 8 Use and Care . 13 European Union Directives Conformance Statement . 15 essentials . 16 about this guide. 16 SIM card . 17 battery . 17 Battery tips . 18 turn it on & off . 19 make a call. 20 answer a call . 20 your phone number. 20 A main attractions . 21 zoom number display . 21 multi-letter phonebook search . 21 lantern . 22 datebook . 23 camera. 27 pictures . 32 use the FM radio . 34 read Nokia smart messages with iMelody . 36 read Nokia smart message with vCard . 37 basics . 38 display . 38 menus . 41 text entry. 42 volume. 44 navigation key . 45 codes & passwords. 45 lock & unlock phone . 45 check battery meter. 46 customize. 47 ring style . 47 time & date . 50 wallpaper . 50 screen saver . 50 display appearance . 50 answer options . 51 calls. 52 recent calls . 52 redial . 53 return a call . 53 notepad . 54 hold or mute a call . 54 T F 4 contents Warranty for the United States and Canada . 80 index . 84 R D call waiting . 54 caller ID . 55 emergency calls . 55 international calls . 56 1-touch dial . 56 other features . 58 advanced calling . 58 phonebook . 60 messages. 63 personalizing. 65 call times & costs. 69 network . 70 more features. 70 security. 72 games. 73 troubleshooting . 74 check here first. 74 service & repairs. 77 Specific Absorption Rate Data . 78 Motorola Limited A F T contents 5 menu map main menu e Messages D R Office Tools
Calculator
MyMenu
Alarm Clock
Datebook
Stop Watch
Lantern
Quick Dial
Fixed Dial
Service Dial l Personalize
Home Screen
Main Menu
Color Style
Greeting
Wallpaper
Screen Saver
Quick Dial A t Ring Styles
Style
Loud Ring Detail
My Tones Note: Certain features may not be available in certain areas. Please contact your provider if you have questions. F w Settings
(see next page) Multimedia
Camera
Pictures
FM Radio T Create Message
Voicemail
Inbox
Info Services
Quick Notes
Outbox
Drafts n Phonebook s Recent Calls
Received Calls
Dialed Calls
Notepad
Call Times
Call Cost Q Games
Rebels
Crazy
Football 6 menu map Note: Certain features may not be available in certain areas. Please contact your provider if you have questions. settings menu Call Forward Initial Setup
Voice Calls
Cancel All
Forward Status D Phone Status
My Tel. Numbers
Active Line
Battery Meter In-Call Setup
In-Call Timer
Call Cost Setup
My Caller ID
Answer Options
Call Waiting Security
Phone Lock
Lock Keypad
Lock Keypad Timer
Fixed Dial
Call Barring
SIM PIN
New Passwords R
Time and Date
Power on/off
1-Touch Dial
Backlight
Scroll
Language
Display Timeout
Contrast
DTMF
TTY Setup
Lantern
Master Reset
Master Clear
New Network
Network Setup
Avail. Networks
My Network List
Service Tone
Call Drop Tone
Band Selection Network A F Headset
Auto Answer T menu map 7 Safety and General Information Safety Information This section contains important information on the safe and efficient operation of your mobile device. Read this information before using your mobile device.*
Exposure to Radio Frequency (RF) Energy Your mobile device contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your mobile device, the system handling your call controls the power level at which your mobile device transmits. Your Motorola mobile device is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy. Operational Precautions For optimal mobile device performance and to be sure that human exposure to RF energy does not exceed the guidelines set forth in
8 The information provided in this document supersedes the general safety information in users guides published prior to May 1, 2006. Safety Information the relevant standards, always follow these instructions and precautions. External Antenna Care If your mobile device has an external antenna, use only a Motorola-supplied or approved replacement antenna. Use of unauthorized antennas, modifications, or attachments could damage the mobile device and/or may result in your device not complying with local regulatory requirements in your country. DO NOT hold the external antenna when the mobile device is IN USE. Holding the external antenna affects call quality and may cause the mobile device to operate at a higher power level than needed. Product Operation When placing or receiving a phone call, hold your mobile device just like you would a landline phone. If you wear the mobile device on your body, always place the mobile device in a Motorola-supplied or approved clip, holder, holster, case, or body harness. If you do not use a body-worn accessory supplied or approved by Motorola, keep the mobile device and its antenna at least 2.5 centimeters (1 inch) from your body when transmitting. When using any data feature of the mobile device, with or without an accessory cable, position the mobile device and its antenna at least 2.5 centimeters (1 inch) from your body. Using accessories not supplied or approved by Motorola may cause your mobile device to exceed RF energy exposure guidelines. For a list of Motorola-supplied or approved accessories, visit our Web site at: www.motorola.com. RF Energy Interference/Compatibility Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices. Follow Instructions to Avoid Interference Problems Turn off your mobile device in any location where posted notices instruct you to do so. These locations include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy. In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight. Pacemakers If you have a pacemaker, consult your physician before using this device. Persons with pacemakers should observe the following precautions:
ALWAYS keep the mobile device more than 20 centimeters (8 inches) from your pacemaker when the mobile device is turned ON.
DO NOT carry the mobile device in the breast pocket.
Use the ear opposite the pacemaker to minimize the
potential for interference. Turn OFF the mobile device immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some mobile devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult your physician or the manufacturer of your device to determine if it is adequately shielded from RF energy. Safety Information 9 Driving Precautions Check the laws and regulations on the use of mobile devices in the area where you drive. Always obey them. When using your mobile device while driving, please:
Give full attention to driving and to the road. Using a mobile device may be distracting. Discontinue a call if you cant concentrate on driving.
Use handsfree operation, if available.
Pull off the road and park before making or answering a call if driving conditions so require. Responsible driving practices can be found in the Smart Practices While Driving section at the end of this guide and/or at the Motorola Web site: www.motorola.com/callsmart. Operational Warnings Obey all posted signs when using mobile devices in public areas, such as health care facilities or blasting areas. Automobile Air Bags Do not place a mobile device in the air bag deployment area. Potentially Explosive Atmospheres Areas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks 10 Safety Information on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust, or metal powders. When you are in such an area, turn off your mobile device, and do not remove, install, or charge batteries. In such areas, sparks can occur and cause an explosion or fire. Damaged Products If your mobile device or battery has been submerged in water, punctured, or subjected to a severe fall, do not use it until you take it to a Motorola Authorized Service Center. Do not attempt to dry it with an external heat source, such as a microwave oven. Batteries and Chargers If jewelry, keys, beaded chains, or other conductive materials touch exposed battery terminals, this could complete an electrical circuit (short circuit), become very hot, and could cause damage or injury. Be careful when handling a charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola Original batteries and chargers. Caution: To avoid risk of personal injury, do not dispose of your battery in a fire. Your battery, charger, or mobile device may contain symbols, defined as follows:
Symbol 032374o Definition Important safety information follows. 032376o 032375o Li Ion BATT 032378o Do not dispose of your battery or mobile device in a fire. Your battery or mobile device may require recycling in accordance with local laws. Contact your local regulatory authorities for more information. Do not throw your battery or mobile device in the trash. Your mobile device contains an internal lithium ion battery. Do not let your battery, charger, or mobile device get wet. Listening at full volume to music or voice through a headset may damage your hearing. Choking Hazards Your mobile device or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your mobile device and its accessories away from small children. Glass Parts Some parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center. Seizures/Blackouts Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your mobile device. Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the Safety Information 11 lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Caution About High Volume Usage Listening at full volume to music or voice through a headset may damage your hearing. Repetitive Motion When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician. 12 Safety Information Use and Care Use and Care To care for your Motorola phone, please keep it away from:
liquids of any kind Dont expose your phone to water, rain, extreme humidity, sweat, or other moisture. extreme heat or cold Avoid temperatures below
-10C/14F or above 45C/113F. microwaves Dont try to dry your phone in a microwave oven. dust and dirt Dont expose your phone to dust, dirt, sand, food, or other inappropriate materials. cleaning solutions To clean your phone, use only a dry soft cloth. Dont use alcohol or other cleaning solutions. the ground Dont drop your phone. Use and Care 13 Recycling Information Caring for the Environment by Recycling This symbol on a Motorola product means the product should not be disposed of with household waste. Disposal of your Mobile Telephone and Accessories Please do not dispose of mobile telephones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems have been set up to handle waste electrical and electronic items. Please contact your regional authorities for more details. If no suitable scheme exists, you may return unwanted mobile telephones and electrical accessories to any Motorola Approved Service Centre in your region. 14 Recycling Information European Union Directives Conformance Statement EU Conformance Hereby, Motorola declares that this product is in compliance with:
The essential requirements and other relevant provisions of Directive 1999/5/EC
All other relevant EU Directives 0168 Product Approval Number The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your products label in the Search bar on the Web site. EU Conformance 15 essentials D about this guide This guide shows how to locate a menu feature as follows:
Find it : Press M > Recent Calls > Dialed Calls This example shows that, from the home screen, you press M to open the menu, highlight and select Recent Calls, then highlight and select Dialed Calls. R A Press S to scroll to and highlight a menu feature. Press the SELECT key to select the highlighted menu feature. symbols F This means a feature depends on the network or subscription and may not be available in all areas. Contact your service provider for more information. This means a feature requires an optional accessory. T 16 essentials SIM card Your Subscriber Identity Module (SIM) card contains personal information like your phone number and phonebook entries. Caution: Do not bend or scratch your SIM card. Keep it away from static electricity, water, and dirt. D R 2 1 battery battery installation 2 1 A F Note: If you remove the battery for a long time, the phone will ask you to reset the time and date. If you choose to cancel or ignore, the time and date will be affected. You can input the correct time and date by:
Find it: Press M > Settings > Initial Setup > Time and Date T essentials 17 But, if you remove the battery just for a few seconds (e.g., quickly change SIM card), the system either wont ask you to reset the time and date or if prompted, you can choose BACK on the time and date screen, the clock will only be slightly affected. D R battery charging New batteries are shipped partially charged. Before you can use your phone, install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles. Plug the charger into your phone and an electrical outlet. Your phone displays Charge Complete when finished. Tip: You cannot overcharge your Power Connector Insert the charger. battery. It will perform best after you fully charge and discharge it a few times. battery tips Battery life depends on the network, signal strength, temperature, features, and accessories you use. Always use Motorola Original batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/
or chargers.
New batteries or batteries stored for a F long time may take more time to charge.
When charging your battery, keep it near room temperature. T A 18 essentials
When storing your battery, keep it uncharged in a cool, dark, dry place. the gray-edged pages at the back of this guide.
Never expose batteries to D temperatures below -10C (14F) or above 45C (113F). Always take your phone with you when you leave your vehicle. It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery. R
Contact your local recycling center for proper battery disposal. Warning: Never dispose of batteries in a fire because they may explode. Before using your phone, read the battery safety information in the Safety and General Information section included in turn it on & off To turn on your phone, press and hold P for 2 seconds. If prompted, enter your SIM card PIN code and/or unlock code. Caution: If you enter an incorrect PIN code 3 times in a row, your SIM card is disabled and your phone displays SIM Blocked. Contact your service provider. To turn off your phone, press and hold P for 2 seconds. F T essentials 19 A your phone number To see your number:
Press M > Settings > Phone Status > My Tel. Numbers To store or edit your name and number on your SIM card, press VIEW while displaying it. If you don't know your phone number, contact your service provider. make a call Enter a phone number and press N to make a call. To end the call, press P. D R answer a call When your phone rings and/or vibrates, press N to answer. To end the call, press P. You can also answer or end a call by pressing any key when the Multi-key answer option is activated. Find it: Press M > Settings > In-Call Setup
> Answer Options A F T 20 essentials main attractions D You can do much more with your phone than make and receive calls! This section describes some of your phones highlights. R zoom number display Zoom number display is a smart function that lets you see the screen numbers more easily. Your phone automatically alters the screen font size depending on how many digits are in the number. Because most people enter 7 digits most frequently, your font size is large most of the time and becomes smaller only when necessary. A multi-letter phonebook search There are two search methods, search by Find, and search by Jump, for phonebook entry searching. To define the search method:
Find it: Press M > Phonebook > M > Search By F search by jump Press a keypad key 1 or more times to jump to entries that begin with the keys letters. Press a second letter to jump to entries beginning with the two letters you entered. You can enter up to six letters. T main attractions 21 search by find When you enter the first letter of an entry in your phonebook, a pop-up screen will ask you to input the name you would like to search for. You can input the first several letters of the target entrys name, then press OK, and the phonebook will jump to the closest match entry. D R lantern The Lantern feature enables you to change your phones idle display into a flashlight. This can be useful in many situations, such as searching under a car seat or locating a door lock in the dark. Note: Certain features may not be available in certain areas. 22 main attractions To activate this feature:
Find it: Press M > Office Tools > Lantern You can specify how long the Lantern feature lights the display when you activate it:
Find it: Press M > Settings > Initial Setup
> Lantern When your phone alerts you to an incoming event (for example, an incoming message or phone call, an alarm, or a datebook event) while the Lantern feature is active, you can deactivate the Lantern feature immediately. When you receive notification:
1 Press any key. 2 Accept the incoming event. The Lantern feature can be set as a shortcut via My Menu. T F A To set up the Lantern feature in MyMenu, follow the steps below:
1 Press M > Office Tools. 2 Scroll to Lantern, then press and hold M. The phone will prompt you to assign a number key. D R datebook The datebook is a calendar that lets you schedule and organize events, such as appointments and meetings. You can review your schedule of events by month, week, or day, and have the datebook play a reminder alarm for specific events. Note: You must set the phones correct time and date in order to use the datebook. To schedule or review events in the datebook:
Find it: Press M > Office Tools > Datebook view by month or by week When you open the datebook, your phone displays a calendar for the month or week, depending on the default setting. To change the week view or month view:
Press M > Office Tools > Datebook > Week or Month. In week view, lines or filled boxes under each day indicate scheduled events. view by day Select a day in the week view or month view and press M to see the day's events. You can store, edit, view, copy, and delete any event from the day view. F view by event Select an event in the day view and press M to open the detailed event view. You can T main attractions 23 A edit, copy, and delete events from the event view. R D add a new event You can add a new event two different ways. Press M > Office Tools > Datebook > M > Day View > [New Entry]. or Press M > Office Tools > Datebook > New > M
> New > Event. To set up the Event detail, follow the steps below. A title is required for a datebook event. All other information is optional. 1 Press CHANGE to select Title. 2 Use the keypad keys to enter a title for the event. 3 Press OK to store the event title. 24 main attractions 4 Press S up and down to scroll to other fields and enter information as necessary. Other fields let you enter Start, Duration, Date, Repeat, and Alarm. 5 Press DONE to store the new event and return to the day view. add a new task You can add a new task:
Find it: Press M > Office Tools > Datebook > New
> M > New > Task To set up the Task detail, follow the steps below. A summary is required for a datebook task. All other information is optional. 1 Press CHANGE to select Summary. 2 Use the keypad keys to enter a summary F 3 Press OK to store the task summary. T for the task. A 4 Press S up or down to scroll to other fields and enter information as necessary. Other fields let you enter Start Date, Deadline, Priority, Completed, Category, and Status. D 5 Press DONE to store the new task and return to the day view. R change event/task information To change information about an existing event/task:
Find it: Press M > Office Tools > Datebook 1 Press S left or right to scroll to the A scheduled event/task day. 2 Press M > Day View to display the day view. 3 Press S up or down to scroll to the event/task you want to change. 4 Press VIEW to display the event/task. 5 Press EDIT to edit the event/task. 6 Press S up or down to scroll to the detail you want to change. 7 Press CHANGE to edit the information. 8 Use the keypad keys to enter the new information. 9 Press DONE to store the information. copy an event/task To copy information from a current event/task to a new event/task:
Find it: Press M > Office Tools > Datebook 1 Press S left or right to scroll to the F scheduled event/task day. 2 Press M > Day View to display the day view. 3 Press S up or down to scroll to the T main attractions event/task to copy. 25 4 Press M to open the Datebook Menu. 5 Press S up or down to scroll to Copy. 6 Press SELECT to copy the event/task. 7 Press YES to confirm the copy. D Your phone assumes that you want to change the date and displays the Date field. 8 Use the keypad keys to enter the date R information. 9 Press S left or right to scroll to the day, month, and year. 10 Press OK to save the copy of the event/
task. 11 Press S up or down to scroll to event/
task details and edit the information as necessary. 12 Press DONE to store the new event/task and return to the day view. 26 main attractions delete an event Find it: Press M > Office Tools > Datebook 1 Press S left or right to scroll to the scheduled event day. 2 Press M > Day View to display the day 3 Press S up or down to scroll to the event view. to delete. A 4 Press M to open the Datebook Menu. 5 Press S up or down to scroll to Delete. 6 Press SELECT to select Delete. F For non-repeating events, a confirmation message will pop up. Choose Yes or No to confirm or cancel the delete. For repeating events, the phone displays a delete event menu. T Press S up or down to scroll to This Event Only or Repeat Events. Press SELECT to select the event(s) to delete. D delete a task Find it: Press M > Office Tools > Datebook 1 Press S left or right to scroll to the scheduled task day. R 2 Press M > Day View to display the day set the alarm within the datebook You can set the Datebook to function as an alarm clock. Find it: Press M > Office Tools > Datebook > M
> New > Event 1 Scroll to Start and use the number keys to enter the desired time. view. to delete. 3 Press S up or down to scroll to the event A press OK. 2 Scroll to Alarm and select Custom. 3 Use the number keys to enter 0 hrs, then 4 Press M to open the Datebook Menu. 5 Press S up or down to scroll to Delete. 6 Press SELECT to select Delete. Your phone displays a confirmation message. Choose Yes or No to confirm or cancel the delete. Note: You will need to enter a Title in order for the Alarm to function. F camera To activate your phones camera using the menu system:
T main attractions 27 Find it: Press M > Multimedia > Camera The active viewfinder image appears on your display. Press S up or down to zoom in or out. D Press S left or right to decrease or increase image brightness. Image Area R Press CAPTURE to take a photo. CAPTURE BACK Press M to view Pictures Menu. 28 main attractions A Press BACK to return to previous screen. Point the camera lens at the photo subject, then:
1 Press CAPTURE to take a photo. 2 Press STORE to view the storage options. If you choose to keep the photo, continue to step 4. 3 Press DISCARD to delete the photo and return to the active viewfinder. 4 Scroll to Store Only, Apply as Wallpaper, Apply as Phonebook Entry and press SELECT to confirm. Note: If the screen flickers when taking a picture, try to adjust the frequency for the Flicker setting. For example, if the Flicker is currently set to 50Hz, switch to 60Hz, and try taking a photo again. Find it: Press M > Multimedia > Camera
> M > Picture Setup > Flicker F T From the active view finder, you can press M to view the Pictures Menu:
R D option Go To Pictures Go to the picture library. Auto-Timed Capture Set the camera to take a photo automatically after 5 or 10 seconds delay. Picture Setup Adjust the picture settings, including: Lighting Conditions, Exposure, Resolution, Shutter Tone, Image Quality, and Flicker. View Free Space Check used and available memory. use auto-timed capture You can set the camera to take a photo automatically after 5 or 10 seconds delay. Find it: Press M > Multimedia > Camera > M
> Auto-Timed Capture 1 Press S up or down to select 5 or 10 seconds, then press SELECT. The screen returns to the active view finder. Frame your subject, and the camera will automatically take the image after the specified time delay. 2 change lighting conditions Find it: Press M > Multimedia > Camera > M
> Picture Setup > Lighting Conditions 1 Press S up or down to choose a lighting condition and press SELECT. F You can choose from the following lighting options: Automatic, Sunny, Cloudy, Indoor (Home), Indoor
(Office), or Night. T main attractions 29 A set the image exposure Find it: Press M > Multimedia > Camera > M
> Picture Setup > Exposure 1 Press S up or down the scale and select D the desired exposure setting for your picture. R 2 Press SELECT to save your settings. The exposure is set to zero as the default. You may need to increase the exposure to lighten a dark subject, or decrease the exposure when the subject is very bright. set the image resolution Use the Resolution option to set the size of captured images. Find it: Press M > Multimedia > Camera > M
> Picture Setup > Resolution 1 Press S up or down to select from Low
(160x120), Medium (320x240), or High
(640x480) resolution and press SELECT. Note: Images with higher resolution use more memory space. A F T 30 main attractions select shutter tone You can change the shutter tone. Find it: Press M > Multimedia > Camera > M
> Picture Setup > Shutter Tone 1 Press S up or down to choose Chirp, Quack, D Flix, Boing, or None to turn the shutter tone off. R 2 Press SELECT to save your settings. set the image quality Use this function to set the image quality of captured images. Find it: Press M > Multimedia > Camera > M
> Picture Setup > Image Quality 1 Press S up or down to choose Good, Better, A 60Hz. or Best. 2 Press SELECT to save your settings. Note: Higher image quality uses more memory space. set the flicker If the screen flickers when taking a picture, try to adjust the frequency of the Flicker setting. For example, if the Flicker is currently set to 50Hz, switch to 60Hz, and try taking a photo again. Find it: Press M > Multimedia > Camera > M
> Picture Setup > Flicker 1 Press S up or down to choose 50Hz or 2 Press SELECT to save your settings. F view free memory space Use this function to see the used, available, and total memory space on your phone. T main attractions 31 Find it: Press M > Multimedia > Camera > M
> Picture Setup > View Free Space D pictures From the Picture Library, you can view images and file details, set the picture as wallpaper or caller ID, or delete unwanted images. R view pictures Find it: Press M > Multimedia > Pictures 1 Press S up or down to select a picture, then press View to display the selected image. 2 Press Details to view the file name, size, type, and the date and time the picture was taken. set an image as wallpaper You can set a captured image as wallpaper. 32 main attractions Find it: Press M > Multimedia > Pictures > M
> Set As 1 In the Pictures Viewer, first select the image you want to set as wallpaper. 2 Press M to open Pictures Menu. 3 Press S up or down to select Wallpaper. The selected image will be applied as the phone wallpaper. set an image as caller ID You can set an image to display as Caller ID for incoming calls. Find it: Press M > Multimedia > Pictures > M
> Set As 1 F In the Pictures Viewer, first select the image you want to set as caller ID. T 2 Press M to open Pictures Menu. A 3 Press S up or down to select Caller 4 Identification. The Phonebook screen appears. Choose the contact you want to add the picture to, and press Add. The selected image will be applied as Caller ID. D Note: This feature is available only for contacts saved to the phone. R play slideshow Use this function to start a slideshow of the images stored on your phone. Find it: Press M > Multimedia > Pictures > M
> Slideshow All images stored on the phone are displayed one after another. Press PAUSE to pause the slideshow and press RESUME to continue. rename a image Captured images are automatically saved with a unique file name. You can change the file name to suit your needs. Find it: Press M > Multimedia > Pictures
> M > Rename 1 In the Pictures Viewer, first select the image you want to rename. 2 Press M to open Pictures Menu. 3 Press S up or down to select Rename. 4 The name screen appears. Enter a new name for the image and press OK to save your settings. F delete an image Find it: Press M > Multimedia > Pictures
> M > Delete T main attractions 33 A turn on the FM radio Find it: Press M > Multimedia > FM Radio The FM radio will automatically tune in the lowest available frequency when you use it for the first time. After that, it will tune in the frequency last used. Press S up and down to increase or decrease the volume. 1 In the Pictures Viewer, first select the image you want to delete. 2 Press M to open Pictures Menu. 3 Press S up or down to select Delete. D R delete all images Use this function to delete all captured images saved to the phone. Find it: Press M > Multimedia > Pictures
> M > Delete All A confirmation message appears. Select YES to confirm. A 4SAtdz c Service Provider 89.30 FM (5) use the FM radio You can listen to and program up to nine of your favorite FM radio stations. 34 main attractions F SPEAKER G 6:35am FM RADIO Note: The earpiece must be inserted into the phone for the FM radio to function. If you try to turn it on without inserting the earpiece, your phone will display Please Insert The Earpiece. T Note: The headset also acts as an antenna, so the FM Radio receiver performance is dependent on the type of headset device connected. If a non-Motorola 3.5 mm headset is connected to the phone through the adapter (2.5 - 3.5 mm), or the headset is curled up or kinked, performance may be affected. D R tune the FM radio 1 Press M > Multimedia > FM Radio. 2 Press S left or right to increase or decrease the frequency. Each keypress will increase or decrease the frequency by 0.1 or 0.2 MHz, depending on your region. 3 Press and hold S left or right to activate the scanning feature. The FM radio will scan to the next usable frequency. You can continue scanning by pressing S again. use the radio presets You can store up to nine preset radio stations. set the radio presets 1 Tune in the desired frequency by pressing S left or right. 2 Press and hold number keys to save that number as the preset. select a radio preset Press number keys to select the corresponding radio preset. A F play FM radio through speaker or headset To play the FM Radio through the speaker, press SPEAKER. To change to the headset, press EARPIECE. T main attractions 35 R Note: The headset must be inserted into the phone for the FM radio to play through the speaker. D turn off FM radio To turn off the radio, press RADIO or remove the headset. read Nokia smart messages with iMelody Find it: Press M > Messages > Text Msgs To open a Nokia Smart Message:
1 Press S to scroll to the message. 2 Press READ to open the message. The phone asks Play Ring Tone?
3 Press YES to play the iMelody. Press NO to cancel playing. 36 main attractions Note: iMelody will play only if the format is correct. Your phone displays a confirmation message. 4 Press STORE. The file name appears. Note: You can download ringtone via SMS messages. store iMelody To store the iMelody:
1 Press STORE. The file name appears. 2 Press OK to save the iMelody into flash. Storing your iMelody may fail for two reasons: if the file name is duplicated, or if the memory is full. If the file name is duplicated, rename the file under My Tones. If the memory if full, replace old ring tones with the new one. F T A read Nokia smart message with vCard D Find it: Press M > Messages > Text Msgs To open the Nokia Smart Message:
1 Press S to scroll to the message. 2 Press READ to open the message. The phone asks Store vCard?
R 3 Press YES to store vCard in the phonebook. Press NO if you don't want to store vCard. A Note: vCard will be stored only if the format is correct. Your phone displays a message if the format is not supported. Note: If your phonebook already is full, vCard cant be stored. If necessary, delete one phone entry before storing vCard. F T main attractions 37 basics See page 1 for a basic phone diagram. D R display The home screen displays when you turn on the phone. To dial a number from the home screen, press the number keys and N. Note: Your home screen may look different depending on your service provider. Left Soft Key Label A 2At x Motorola 04/25/2006 Date t e n A SETTING G 6:35am PH.BOOK Menu Indicator Clock Right Soft Key Label F When M is displayed, you can press M to open the menu. Soft key labels show the current soft key functions. For soft key locations, see page 1. In the home screen, press S up, down, left, or right to scroll main functions. You can choose to show or hide the icons on the home screen. T 38 basics D Find it: Press M > Personalize > Home Screen
> Home Keys > Icons You can also change the functions of the soft keys, and which functions appear on your home screen. Find it: Press M > Personalize > Home Screen
> Home Keys > Up, Down, Left, Right, Left Soft Key, or Right Soft Key Note: The home key function can only be used when the FM radio is not activated. R A status indicators Status indicators display at the top of the home screen:
3 4 5 6 7 c 2 1 4 SAt Motorola 04/25/2006 n A t e SPEAKER G 6:35am FM RADIO 1 Signal Strength Indicator F 2 Headset Indicator displays shows the strength of your phone's connection with the network. when the headset is plugged into the phone. T 39 basics 3 Roam Indicator appears when your phone uses another network system outside your home network. 4 LINE Indicator indicates if your D phone is using Line 1 or Line 2. 5 Message Indicator appears when you have a new voice or text message:
r = text message t = voicemail message R 6 Ring Style Indicator shows the ring style setting. y = loud ring = vibe and z = soft ring
| = vibrate ring
= vibe then ring
= silent 7 Battery Level Indicator vertical bars show the amount of charge left in your battery. The more bars, the greater the charge. A Note: A flashing message indicator means that your inbox is full. You will not be able to receive new messages until you delete old ones. 40 basics F T menus From the home screen, press M to enter the main menu, then press S to scroll up and down through the main menu list. D R Exit the main menu. The following menu icons may be available, depending on your service provider and service subscription options. menu features e Messages n Phonebook s Recent Calls Q Games Office Tools t Ring Styles w Settings r Multimedia l Personalize A Exit menu without making changes &
return to the home screen. F Note: Certain features may not be available in certain areas. Select highlighted menu feature. Scroll up or down. T 41 basics select a feature option Some features require you to select an option from a list:
D Phonebook Highlighted Option. ANDREAS BERNARD e EC R Press BACK to go back to previous screen. Press VIEW to see details of highlighted option. VIEW BACK Press M to to open sub-menu. A Scroll up or down to highlight the option you want. 42 basics text entry Some features let you enter text. Msg 765 Character counter Flashing cursor indicates insertion point. Press INSERT to insert a quick note. INSERT CANCEL Press M to open sub-menu. Press CANCEL to exit without saving any changes. F choose a text entry method Multiple text entry methods make it easy for you to enter names, numbers, and messages. The method you select remains active until you select another method. Press # in any text entry screen to select one of the following modes:
T D entry mode Tap Includes iTAP English, Tap Extended, and Tap English. Numeric Enter numbers only. Symbol Enter symbols only. R set up text entry mode To set your text entry modes, press M in a text entry screen and select the desired entry mode. Tip: Pressing 0 will toggle between uppercase and lowercase in English alphabet text entry. iTAP mode Press # in a text entry screen to switch to iTAP mode. iTAP mode lets you enter words using one keypress per letter. The iTAP software combines your keypresses into common words and predicts each word as you enter it. For example, if you press 7764, your phone displays a list of suggestions for words such as Prog, Proh, and Spoi. F tap mode Press # in a text entry screen and select tap mode. To enter text in tap mode, press a keypad key repeatedly to cycle through the letters and number on the key. Repeat this step to enter each letter. T 43 basics A For example, if you press 8 once, the phone displays:
Character displays at insertion point. D After 2 seconds, the character is accepted and the cursor moves to next position. Msg 765 T OK Press OK to accept & store text. DELETE R Press DELETE to delete character to left of insertion point. numeric mode Press the number keys to enter the numbers you want. symbol mode Press a keypad key to show its symbols at the bottom of the display. Highlight the symbol you want, then press SELECT.
If you want a different word (such as Text), continue pressing keypad keys to enter the remaining characters.
Tap Extended mode cycles through additional special characters and symbols as you repeatedly press a keypad key. A volume When you are in a call, press S right to increase earpiece speaker volume, left to decrease it. When the phone display is idle, press and hold S right or left to adjust the ringer volume. Tip: During a call, you can set your phone to mute by pressing M > Mute. F T 44 basics navigation key Press the navigation key S left or right to scroll and highlight options. R D codes & passwords Your phone's 4-digit unlock code is originally set to 1234. If your service provider did not change these codes, you should change them:
Find it: Press M > Settings > Security > New Passwords You can also change your SIM PIN. If you forget your unlock code: Try entering 1234 or the last four digits of your phone number. If you forget other codes: If you forget your SIM PIN code or PIN2 code, contact your service provider. lock & unlock phone You can lock your phone to keep others from using it. To lock or unlock your phone, you need the 4-digit unlock code. To manually lock your phone:
Find it: Press M > Settings > Security > Phone Lock > Lock Now. To automatically lock your phone whenever you turn it on:
Find it: Press M > Settings > Security > Phone Lock > Automatic Lock > On. You can set up the time amount before the keypad automatically locks. T 45 F basics A The options are Off, 15 seconds, 30 seconds, and 1 minute. Find it: Press M > Settings > Security > Lock Keypad Timer. Note:
D need to unlock it (with your 4-digit code) to answer. check battery meter To check your battery meter:
Find it: Press M > Settings > Phone Status
> Battery Meter
You can make emergency calls with a locked keypad (see page 55). With a locked keypad, the phone still rings or vibrates for incoming calls and can be answered without unlocking the keypad. R A
When the keypad is locked, there is a 1 second wait time between each key press. If you press a key prematurely, the display does not update, and it could appear as if the phone has powered down.
You can make emergency calls on a locked phone. A locked phone still rings or vibrates for incoming calls, but you 46 basics F T customize R D ring style Your phone rings and/or vibrates to notify you of an incoming call, message, or other event. This ring and/or vibration are called an alert. You can select 1 of 6 different alert profiles: Loud Ring, Soft Ring, Vibrate, Vibe and Ring, Vibe then Ring, and Silent. The profile indicator for the ring style displays at the top of your home screen. To choose your profile:
Find it: Press M > Ring Styles > Style > alert type A change ring details You can change the ring or key volume and select vibrate/silent/ring details for incoming calls and other events. Your changes are saved in the current ring style profile. Find it: Press M > Ring Styles > Detail
> desired event > Change > alert for event F my tones This feature allows you to create custom alert tones for your phone. The tones you create appear automatically in the list of available alerts. T customize 47 create a tone Find it: Press M > Ring Styles > My Tones 1 Press S up or down to scroll to Empty D Ring. 2 Press SELECT to go to Tone Details. 3 Press CHANGE to select Notes:
4 Use the number keys to enter notes for R the tone. 5 Press OK to store the notes. 6 Press CHANGE to select Name:
7 Use the keypad keys to enter the name for the tone. A enter notes To enter a note, press S up and down to select the note name. You can also enter a note by pressing the key associated with the note name. To change octaves, press 0 twice to insert a *, then enter the octave number. Press 0 to insert a flat & or sharp * before the note. Change note length by inserting 0-5 after the note. Use the 7 to insert a reset r. Scroll left or right by pressing the S, or using the * and #. play a note Find it: Press M > Ring Styles > My Tones T F 8 Press OK to store the name. 9 Press DONE to store the tone. 48 customize 1 Press S up or down to scroll to the tone you want to play. 5 Use the keypad keys to enter new text or notes. 2 Press M to open Tone Menu. 3 Scroll to Play and press SELECT. D The phone displays the playback meter and plays the tone. R 4 Press Play to play the tone again or press CANCEL to return to the My Tones list. edit a tone Find it: Press M > Ring Styles > My Tones 1 Press S up or down to scroll to the tone you want to edit. 2 Press EDIT to open the tone details. 3 Press S up or down to scroll to the details you want to edit (Name or Notes). 4 Press CHANGE to select the details you want to edit. 6 Press OK to store the details. delete a tone You can delete a custom tone you created. Find it: Press M > Ring Styles > My Tones 1 Press S up or down to scroll to the tone you want to delete. 2 Press M to open My Tones. 3 Press S up or down to scroll to Delete. 4 Press SELECT to select Delete. 5 Press YES to confirm the deletion. F T customize 49 A browse my tones Find it: Press M > Ring Styles > My Tones 1 Press S up or down to scroll to a tone. 2 Press M to select functions such as D Edit, Delete, and Play. R time & date To set the time and date for your phone:
Find it: Press M > Settings > Initial Setup
> Time and Date A wallpaper You can set a picture as a wallpaper
(background) image on your home screen. Find it: Press M > Personalize > Wallpaper 50 customize Note: To choose an analog or digital clock for your home screen, Press M > Personalize
> Home Screen > Clock Set. screen saver You can set a picture or clock as a screen saver image. The screen saver displays when no activity on the home screen is detected for a specified time. Tip: This feature helps save your screen but not your battery. To extend battery life, turn off the screen saver. Find it: Press M > Personalize > Screen Saver F display appearance You can set the contrast of your phone display:
T R D Find it: Press M > Settings > Initial Setup
> Contrast To save battery life, the backlight turns off when you're not using your phone. The backlight turns back on when you press any key. To set how long your phone waits before the backlight turns off:
Find it: Press M > Settings > Initial Setup
> Backlight To choose the colors that your phone uses for indicators, highlights, and soft key labels:
Press M > Personalize > Color Style. To set your display Color Style:
Press M > Personalize > Color Style. To save battery life, the display can turn off in idle mode when you're not using your phone. The display turns back on when you press any key. To set how long your phone waits before the display turns off:
Find it: Press M > Settings > Initial Setup
> Display Timeout answer options You can use additional methods to answer an incoming call. To activate or deactivate an answer option:
Find it: Press M > Settings > In-Call Setup
> Answer Options A F option multi-key On multi-key Off Answer by pressing any key. Answer by pressing N. T customize 51 calls To make and answer calls, see page 20. D R recent calls Your phone keeps lists of incoming and outgoing calls, even for calls that didn't connect. The most recent calls are listed first. The oldest calls are deleted as new calls are added. Find it: Press M > Recent Calls 1 Highlight Received Calls or Dialed Calls, and A option Store SELECT. 2 Highlight a call.
To call the number, press N.
To see call details (such as time and date), press VIEW. From the Dialed Calls list, press M to see the following options:
Delete Delete All F Create a phonebook entry with the number in the No. field. Delete the entry. Delete all entries in the list. Show your caller ID for the next call. T Show ID 52 calls option Hide ID Send Message Add Digits Attach Number D Hide your caller ID for the next call. Deliver the message. Add digits after the number. Attach a number from the phonebook or recent calls lists. R redial 1 Press N from the home screen to see the Dialed Calls list, or press M
> Recent calls > Received Calls, Dialed Calls, or Notepad. 2 Highlight the entry you want to call and press N. If you hear a busy signal and you see Call Failed, Number Busy, press N to redial the number. return a call Your phone keeps a record of your unanswered calls and displays Missed Call(s): X, where X is the number of missed calls. 1 Press VIEW to see the Received Calls list. 2 Highlight the call you want to return and F Note: If there is a missed call, it will be displayed on the home screen. You can one-touch dial that number from the home screen. If you have more than one missed call, you will see a list of the missed numbers and may select one and dial it. T calls 53 A press N. R D notepad Your phone stores the most recent string of digits entered on the keypad in a temporary memory location called the notepad. These digits can be the last phone number that you called, or a phone number that you simply entered but did not call. These digits remain in the notepad even when you turn off the phone. To call the number, create a phonebook entry, or perform other operations with the number stored in the notepad:
Find it: Press M > Recent Calls > Notepad
To call the number, press N.
To create a phonebook entry with the number in the No. field, press STORE. 54 calls hold or mute a call When you are on a call:
Press M > Hold to put all active calls on hold. Press M > Mute to put all active calls on mute. A call waiting When you're on a call, you'll hear an alert if you receive a second call. Press N to answer the new call. F
To switch between calls, press SWITCH.
To connect the two calls, press LINK.
To end the call on hold, press T M > End Call On Hold. To turn the call waiting feature on or off:
Find it: Press M > Settings > In-Call Setup
> Call Waiting D R caller ID Calling Line Identification (caller ID) shows the phone number of an incoming call on your display. Your phone shows the caller's name when it is stored in your phonebook, or Incoming Call when caller ID Information isn't available. To show or hide your phone number for the next outgoing call or for all calls:
Find it: Press M > Settings > In-Call Setup > My Caller ID A emergency calls Your service provider programs one or more emergency phone numbers (such as 112 or 911) that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted. You can dial and call the emergency number when your phone is locked or when you are prompted to enter a code or password. Note: Emergency numbers vary by country. Your phone's preprogrammed emergency number(s) may not work in all locations. Sometimes an emergency call cannot be placed due to network, environmental, or interference issues. To call emergency numbers at any time:
1 Press the keypad keys to dial the T F emergency number. calls 55 2 Press N to call the emergency number. D international calls If your phone service includes international dialing, press and hold 0 to insert your local international access code
(indicated by +). Then press the keypad keys to dial the country code, such as
+44 for the U.K., +33 for France, and the phone number. R A 1-touch dial To call phonebook entries 2 through 9, press and hold the 1-Touch Dial number for one second. You can set 1-Touch Dial to call the entries in your Phonebook or Fixed Dial list:
56 calls Find it: Press M > Settings > Initial Setup
> 1-Touch Dial > SIM, Phone or Fixed Dial Note: To change 1-touch numbers, go to M > Phonebook > VIEW > EDIT. voicemail When you receive a voicemail message, your phone displays 1 New Voicemail Message and a new voicemail indicator. Some networks only indicate when you have messages, whether they are new or not. If you delete all voicemail messages, the voicemail indicator will disappear. To listen to your voicemail message:
Find it: Press M > Messages > Voicemail or Press and hold 1 (only supported in some regions). T F Your phone may prompt you to store your voicemail phone number. If you do not have a voicemail number stored, the phone guides you through storing the number. If you don't know your voicemail number, contact your service provider. D R insert special characters into dialing sequences You can insert special characters, as well as numbers, in a phone number. option p (pause) Your phone waits until the call w (wait) connects before it dials the next digit(s) in the series. Your phone waits until the call connects, then prompts you for confirmation before it dials the next digit(s). A You can add a pause or a wait while your call is dialing. To add a pause before the phone connects, press * twice. When p appears, press it to add a pause. Or, if you are adding a wait, press * three times. The w will eventually appear and, when it does, press it to add a wait. F T calls 57 other features D advanced calling feature conference call R During a call:
Dial next number, press N, and then press LINK. Press M > Phonebook and scroll to the desired entry. Press M
> Attach Number, and choose from Phonebook, Dialed Calls, or Received Calls. Set up or cancel call forwarding:
M > Settings > Call Forward attach a phone number call forwarding 58 other featuresadvanced calling A feature call barring Restrict outgoing or incoming calls:
M > Settings > Security > Call Barring F T feature change phone line feature fixed dial D If you have a SIM card for dual phones, you can change your line to make and receive calls from your other phone number. M > Settings > Phone Status
> Active Line The active line indicator shows the active phone line. R A When you turn on Fixed Dial you can call only numbers stored in the Fixed Dial, list. Turn Fixed Dial on or off:
M > Settings > Security > Fixed Dial Tip: To turn Fixed Dial on and off, first enter your SIM PIN2. Use the Fixed Dial list:
M > Office Tools > Fixed Dial To save Quick Dial numbers:
M > Personalize > Quick Dial To dial Quick Dial numbers:
M > Office Tools > Quick Dial T F quick dial other featuresadvanced calling 59 feature DTMF tones D Change DTMF tones:
M > Settings > Initial Setup
> DTMF phonebook feature add new entry R A M > Phonebook > M > New
> Name or No. Shortcut: Enter a phone number in the home screen, and press STORE to create an entry for that number. Note: Your phones memory limit is 500 entries. The SIM card's memory limit depends on your carriers SIM card type. T F 60 other featuresphonebook feature search entry by feature dial number D Call a number stored in the phonebook:
M > Phonebook, highlight the phonebook entry, press N. Shortcut: In the Phonebook, press keypad keys to enter the first letter of an entry name to jump to the entry. R A F Press a keypad key 1 or more times to jump to entries that begin with the keys letters. Press a second letter to jump to entries beginning with the two letters you entered. You can enter up to twelve letters. M > Phonebook > M
> Search By T other featuresphonebook 61 feature copy phonebook entry R D Copy a phonebook entry from the phone to the SIM card, or from the SIM card to the phone:
M > Phonebook, highlight the entry, press M
> Copy Entry Note: Phonebook entries must have speed dial numbers from 1-500, while SIM card entries numbers are from 501-540. Therefore, copying an entry from one to the other will change its speed dial number. A feature copy multiple entries Copy multiple phonebook entries between the phone and SIM card:
M > Phonebook, highlight one entry, press M
> Copy Entries, press CHANGE, enter the starting/ending speed no., press OK. To copy all phone entries to the SIM card:
M > Phonebook, highlight one entry, press M
> All to SIM. To copy all SIM entries to the phone:
M > Phonebook, highlight one entry, press M
> All to Phone. T F copy all phone entries to the SIM card copy all SIM entries to the phone 62 other featuresphonebook feature phone/SIM capacity D R To check the memory capacity of your phone or SIM card:
Note: Your phones memory limit is 750 entries. The SIM card's memory limit depends on your carriers SIM card type. M > Phonebook, highlight one entry, press M
> SIM Capacity/Phone Capacity. A messages feature send text messages send a quick note move to phone/SIM M > Messages
> Create Message M > Messages
> Quick Notes To move a message from the phone to the SIM card, or from the SIM card to the phone:
M > Messages > Inbox, highlight a message, press M > Move to Phone or Move to SIM Read a new text message:
Press READ when the New Message notification displays. T other featuresmessages 63 F read new message feature info services feature read old messages read sent messages edit old drafts D Reread your previously read messages. Press M to perform various operations on a message. M > Messages > Inbox > Delete, Call Back, Reply, Forward, Store or Delete All. Sent messages are saved in the Outbox. M > Messages > Outbox Save the message that you are editing to the Drafts folder for later editing. M > Messages > Drafts R message memory meter A text message setup F Read messages from subscription-
based information services:
M > Messages > Info Services Check the message memory meter:
M > Messages > M
> Memory Meter To set up text message information:
M > Messages > M
> Text Msg Setup > Srvce center No./ Reply Type / SMS Default Storage / SMS Alert T 64 other featuresmessages scroll personalizing feature language D R Set the menu language:
M > Settings > Initial Setup
> Language Set the highlight bar to stop or wrap around in the menu lists:
M > Settings > Initial Setup
> Scroll M > Ring Styles > style Detail
> Ring Volume M > Ring Styles > style Detail
> Key Volume ring volume keypad volume main menu Reorder the main menus on your phone:
M > Persnalize > Main Menu feature change soft keys and home screen icons Change the functions of the soft keys, and which functions appear on your home screen. M > Personalize > Home Screen
> Home Keys > Up, Down, Left, Right, Left Soft Key, or Right Soft Key Note: The home key function can only be used when the FM radio is not activated. A F T other featurespersonalizing 65 feature shortcuts feature power on/
off R D Create a shortcut to a menu item:
Highlight the menu item, then press and hold M. When you see Assign MyMenu for: desired menu item, select YES. (Make a note of the Key number.) Then press Done. Use a shortcut:
Press M, then press the shortcut number in the home screen. A To set the power on/off time and mode:
M > Settings > Initial Setup
> Power On/Off You can set the time you want the phone to power on/off. The time you set indicates when the phone will automatically power on or off. F T 66 other featurespersonalizing feature D R Note: If your phone automatically switches on or off at a specific time, please check if this feature is turned on. Note: Enabling this feature will enable the phone to automatically power off and on at the times shown in the menu. To set up TTY information:
M > Settings > Initial Setup
> TTY Setup Note: This feature is not available in all regions. TTY Setup A feature headset lantern To switch the phone to auto answer when the headset is inserted:
M > Settings > Headset M > Settings > Initial Setup
> Lantern or M > Office Tools > Lantern This feature makes your LCM screen function as a flashlight. To deactivate it, press any button. To reset all options except for user data to their factory settings:
M > Settings > Initial Setup
> Master Reset T other featurespersonalizing 67 F master reset feature master clear feature To clear all information, you need to enter the Unlock Code (1234). R D To reset all options to their factory settings and clear all user entries (such as phonebook entries and events in the phone memory and sounds):
M > Settings > Initial Setup
> Master Clear Warning: This option erases all information you have entered (including phonebook entries) and content you have downloaded. Once you erase the information, it cannot be recovered. All options are reset back to their factory settings, except for the unlock code, and lifetime timer. A F T 68 other featurespersonalizing feature in-call timer call cost call times & costs Network connection time is the elapsed D time from the moment you connect to your service provider's network to the moment you end the call by pressing O. This time includes busy signals and ringing. The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider. For billing information, contact your service provider. R call cost setup A Set the in-call timer:
M > Settings > In-Call Setup > In-Call Timer Display call cost trackers:
M > Recent calls > Call Cost To edit call cost details:
M > Settings > In-Call Setup
> Call Cost Setup feature call times Display call timers:
M > Recent Calls > Call Times F T other featurescall times & costs 69 network feature network settings D Display network information and adjust network settings:
M > Settings > Network R A more features feature calculator M > Office Tools > Calculator M > Office Tools > Calculator currency
> M > Exchange Rate converter Enter exchange rate, press OK. M > Office Tools > Calculator, enter amount, and select the dollar sign to convert the currency. Activate a connected external speakerphone during a call:
Press SPKR ON and SPKR OFF to turn the speakerphone on and off. T F speaker-
phone 70 other featuresnetwork feature stop watch M > Office Tools > Stop Watch feature datebook D R Press START to start counting the time and the STOP key to stop counting the time. Press RESET to reset the Stop Watch. Note: Once Stop Watch is activated, press SNAP to record the time elapsed. Press S right or left to navigate through the recorded SNAP times. A Keep track of your appointments and tasks using an alarm. M > Office Tools > Datebook Note: Certain features may not be available in certain areas. F T other featuresmore features 71 feature alarm clock Use the alarm clock security feature SIM PIN R D function. M > Office Tools > Alarm Clock Once an alarm is set, it may be disabled from the same menu. When the alarm goes off, the options of turning it off or pressing Snooze are on the home screen. The Snooze function will sound every 8 minutes until it is turned off. Note: Certain features may not be available in certain areas. A phone lock F Turn on/turn off the SIM PIN:
M > Settings > Security
> SIM PIN Caution: If you enter an incorrect PIN code 3 times in a row, your SIM card is disabled and your phone displays PIN1 Blocked. Lock the phone immediately, or turn on/off the Automatic Lock. M > Settings > Security
> Phone Lock Press M then press * to lock/unlock the keypad. T lock/unlock keypad 72 other featuressecurity feature lock keypad timer D Set the phone to lock automatically after a certain period of time:
M > Settings > Security
> Lock Keypad Timer You can set up the time amount before the phone automatically locks. Press M > Settings > Security
> Lock Keypad Timer R A games feature start games M > Games > game F T other featuresgames 73 troubleshooting D check here first If your phone does not seem to work properly, read this page first. If you still need help, see page 77. R automatic power on/off Question: My phone powers off automatically while in standby mode. What should I do when this happens?
Answer: This phone has an on/off feature that automatically turns the power on/off at specific times. To access this feature:
Find it: Press M > Settings > Initial Setup
> Power On/Off 74 troubleshooting Note: If your phone automatically switches on or off at a specific time, please check if this feature is turned on. F changing the time on the clock Question: The time on my phone is incorrect during normal use. How can I change it?
Answer: The time is reset whenever you remove the battery. This will cause the clock to display the incorrect time the next time you turn on the power. Whenever you replace the battery and turn on the power, be sure to enter the correct time and date:
T A Find it: Press M > Settings > Initial Setup
> Time and Date D storing phone numbers in phone memory Question: How should I store phone numbers in the phone memory?
Answer: You can save phone numbers either in the SIM card or the phone memory. To do this:
Find it: Press M > Phonebook > M > New R no incoming call ring tone Question: Why dont I hear a ring tone for incoming calls or messages?
Answer: Check the volume setting by pressing S right or left to adjust the volume. no service Question: Why does the phone display no service?
Answer: Each service provider operates at a certain frequency band. Call you service provider to find out their frequency band. Make sure the band selection setting on your phone matches that frequency band. Find it: Press M > Settings > Network > Band Selection Note: Because this feature depends on your service provider's setting, you might not see this feature in your phone. F T troubleshooting 75 A attaching the battery door To attach the battery door, place it as shown in the figure below, then slide it up to lock it into place. 2 1 D messages: enter special code, SIM locked - contact service provider, subsidy password Question: What do these messages mean?
Answer: You might see this message if you have the wrong SIM card or if you have incorrectly entered your code five times. If you have the wrong SIM card, you may need to replace it. If you incorrectly enter your code, you will need to enter it correctly. The number of times an incorrect code can be entered depends on your service provider. Contact your service provider, if necessary. R A F To prevent damage to the battery door, install only as described here. T 76 troubleshooting service & repairs D If you have questions or need assistance, were here to help. Go to www.motorola.com/consumer/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-866-395-3710 (United States), 1-888-390-6456 (TTY/TDD United States for hearing impaired), or 1-800-461-4575
(Canada). R A F T service & repairs 77 Specific Absorption Rate Data R SAR Data D This model meets international guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The ICNIRP SAR limit for mobiles devices used by the general public is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.69 W/kg.1 As 78 SAR Data mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this user guide.2 In this case, the highest tested SAR value is 0.36 W/kg.1 As SAR is measured utilizing the devices highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. T F A The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head and body. Additional Information can be found on the websites of the World Health Organization D R
(http://www.who.int/emf) or Motorola, Inc.
(http://www.motorola.com/rfhealth). 1. The tests are carried out in accordance with international guidelines for testing. The limit incorporates a substantial margin for safety to give additional protection for the public and to account for any variations in measurements. Additional related information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. 2. Please see the Safety and General Information section SAR Data A F T SAR Data 79 Motorola Limited Warranty for the United States and Canada Warranty What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, messaging devices, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (Accessories) and Motorola software contained on CD-ROMs or other tangible media and sold for use with these Products (Software) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:
80 Warranty Products and Accessories Products Covered Products and Accessories as defined above, unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap covers and cases. Monaural Headsets. Ear buds and boom headsets that transmit mono sound through a wired connection. Length of Coverage One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Products Covered Consumer and Professional Two-Way Radio Accessories. Products and Accessories that are Repaired or Replaced. Length of Coverage Ninety (90) days from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from:
(a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software Products Covered Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-ROM, or floppy disk). Length of Coverage Ninety (90) days from the date of purchase. Warranty 81 Exclusions Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided as is and without warranty. Who Is Covered?
This warranty extends only to the first consumer purchaser, and is not transferable. What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service. 82 Warranty How to Obtain Warranty Service or Other Information USA Canada Phones 1-800-331-6456 Pagers 1-800-548-9954 Two-Way Radios and Messaging Devices 1-800-353-2729 All Products 1-800-461-4575 1-888-390-6456 TTY For Accessories and Software, please call the telephone number designated above for the product with which they are used. You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted. Warranty 83 index A accessories 16 accessory 16 alarm clock 72 answer a call 20 answer options 51 automatic power on/off 66, 74 B battery charging 18 extending battery life 18 installation 17 84 index Numerics 1-touch dial 56 D tips 18 battery level indicator 40 battery meter 46 Bluetooth indicator 3 R caller ID 55 camera 3, 27 active viewfinder 28 auto-timed capture 29 capture image 28 delete a image 33 flicker 28, 31 image as caller ID 32 image as wallpaper 32 image exposure 30 image quality 31 image resolution 30 lighting conditions 29 memory space 31 pictures menu 29 pictures viewer 32 rename a image 33 shutter tone 31 T A C cables 18 calculator 70 call answer 20 end 20 make 20 call barring 58 call cost 69 setup 69 call forwarding 58 call times 69 call waiting 54 F display appearance 50 DTMF tones 60 slideshow 33 change phone line 59 conference call 58 currency converter 70 D D datebook 23, 71 E earpiece add a new event 24 add a new task 24 change event/task R tune 35 turn on/off 34, 36 frequently asked questions 77 G games 73 H headset 67 with FM radio 35 headset indicator 39 hold a call 54 home screen 16, 38, 41 store 36 in-call timer 69 indicator T battery level 40 index 85 with FM radio 34 emergency calls 55 emergency number 20 end a call 20 end key 20 external display 3 A F fixed dial 59 FM radio 34 headset 35 play through headset 35 play through speaker 35 presets 35 select 35 set 35 F I iMelody information 25 copy an event/task 25 delete a task 27 delete an event 26 set the alarm 27 view by day 23 view by event 23 view by month or by week 23 dial a phone number 20 dialing sequences 57 display 16 headset 39 LINE 40 message 40 ring style 40 roam 40 signal strength 39 info services 64 international calls 56 iTAP software 43 K keypad lock timer 73 lock/unlock 72 keypad volume 65 L language 65 lantern 22, 67 activate 22 LINE indicator 40 86 index lock/unlock phone 45 D M make a call 20 master reset 67 menu 16 R entering text 42 menu features 41 message text 63 delete a tone 49 edit a tone 49 enter notes 48 play a note 48 N navigation key 45 network dependent features 16 network settings 70 Nokia smart messages with Nokia smart messages with message indicator 40 messages A Nokia smart messages with iMelody 36 Nokia smart messages with vCard 37 multi-letter phonebook F vCard reading 37 notepad 54 iMelody reading 36 search 21 mute a call 54 my tones 47 browse my tones 50 create a tone 48 O optional 16 optional accessory 16 T optional feature 16 P phone lock/unlock 45, 72 D phone number 20 phonebook redial 53 return a call 53 ring style 47 ring style indicator 40 ring volume 65 roam indicator 40 R add new entry 60 copy entries to phone 62 copy entries to SIM 62 copy entry 62 copy multiple entries 62 phone/SIM capacity 63 power key 19 predictive text entry 43 S safety information 8 screen saver 50 scroll key 38 search by fin 61 search by find 22 search by jump 21, 61 send key 20 setup A time and date 17 shortcuts 66 signal strength indicator 39 SIM store/edit phone number or your name 20 Q quick dial 59 R recent calls 52 SIM (Subscriber Identity Module) card 17 SIM PIN 72 smart key 3 soft keys 38 change 65 speakerphone 70 status indicators 39 stop watch 71 store your number 20 T text F text entry entering 42 iTAP software predictive text entry 43 set up 43 choose a text entry method 42 T text message 63 time & date 50 index 87 setting 74 TTY Setup 67 turn on/off 19 Z zoom number display 21 U USB cables 18 D R A V voicemail 56 volume 44 keypad 65 ring 65 W wallpaper 50 warranty 80 Y your phone number 20 88 index F T
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-01-14 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Class II permissive change or modification of presently authorized equipment |
2 | 2007-01-29 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
3 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2008-01-14
|
||||
1 2 3 |
2007-01-29
|
|||||
1 2 3 | Applicant's complete, legal business name |
Motorola Mobility LLC
|
||||
1 2 3 | FCC Registration Number (FRN) |
0004321311
|
||||
1 2 3 | Physical Address |
Motorola Mobility LLC
|
||||
1 2 3 |
Chicago, Illinois 60654
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
IHD
|
||||
1 2 3 | Equipment Product Code |
T56GR1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J****** N********
|
||||
1 2 3 | Title |
Director Product Compliance
|
||||
1 2 3 | Telephone Number |
847-6********
|
||||
1 2 3 | Fax Number |
847-6********
|
||||
1 2 3 |
n******@motorola.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 | Name |
R****** O******
|
||||
1 2 3 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 |
Columbia, Maryland 21045
|
|||||
1 2 3 |
United States
|
|||||
1 2 3 | Telephone Number |
410-2********
|
||||
1 2 3 | Fax Number |
410-2********
|
||||
1 2 3 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Yes | |||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Cellular/ PCS GSM Transceiver | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 3 | Grant Comments | Class II Permissive Change. Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are: Part 22 - Head: 0.99 W/kg; Body-worn: 0.45 W/kg; Part 24 - Head: 1.0 W/kg; Body-worn: 0.64 W/kg. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | ||||
1 2 3 | Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are: Part 22 - Head: 0.99 W/kg; Body-worn: 0.45 W/kg; Part 24 - Head: 1.0 W/kg; Body-worn: 0.64 W/kg. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Motorola Inc.
|
||||
1 2 3 | Name |
A******** P****
|
||||
1 2 3 | Telephone Number |
847-5********
|
||||
1 2 3 | Fax Number |
847-5********
|
||||
1 2 3 |
a******@motorola.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.2 | 848.8 | 0.762 | 2.5 ppm | 242KGXW | ||||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1850.2 | 1909.8 | 1.69 | 2.5 ppm | 248KGXW | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 22H | 824.2 | 848.8 | 0.762 | 2.5 ppm | 242KGXW | ||||||||||||||||||||||||||||||||||
3 | 2 | 24E | 1850.2 | 1909.8 | 1.69 | 2.5 ppm | 248KGXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC