92FT7118 Mobile 2-Way Radio with WiFi Quick Reference Guide Users Manual

m ASTRO APX O5 Control Head Mobile Radio Quick Reference Card RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios ATTENTION!

This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. Radio Controls Volume Knob Dim Button Home Button Power On/Off Button Indicators Mode Knob Orange Button LED Indicators Menu Entries Menu Select Button Navigation Button Accessory Port (Microphone) Radio On/Off Press the Power On/Off button to toggle the power on or off.*

* The duration that user must press and hold the Power On/Off button to turn off the radio is programmable by a qualified radio technician. Adjusting Volume Turn the Volume Knob clockwise to increase volume or counterclockwise to decrease the volume. Selecting a Zone 1 > or < to ZONE. 2 > or < button until the desired zone is displayed. 3 Press H or the PTT button to confirm the selected zone number. 4 Press the PTT button to begin transmitting on the displayed zone channel. Selecting a Channel 1 Press and hold > to scroll to CHAN and press the Menu Select button directly below CHAN. The display shows the current zone and channel. 2 Rotate the Mode knob to the desired channel. 3 Press H or the PTT button to confirm the channel. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 20092011, 2013, 2015 by Motorola Solutions, Inc. All Rights Reserved. 06/15 1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A. 4 Press the PTT button to transmit on the displayed zone channel. Receiving and Transmitting 1 Take the microphone off hook. 2 Select zone/channel. 3 Listen for a transmission. OR Turn the Volume Knob. OR

> or < to MON then press the Menu Select button directly below MON and listen for activity. 4 Adjust volume, if necessary. 5 Press the PTT button to transmit; release to receive. Sending an Emergency Alarm 1 Press the Emergency button. A tone sounds and the display alternates EMERGENCY and the home display. 2 A dispatcher acknowledgment ACK RECEIVED display follows. AND, Trunking Only:

A high-pitched tone indicates that the alarm has been received by the trunked systems central controller. 3 Press and hold the emergency button or the PTT button to return to normal operation. To exit emergency at any time, press and hold the Emergency button.

*PMLN5592G*

PMLN5592G English Sending an Emergency Call (Trunking Only) 1 Press Emergency button. 2 A tone sounds and the display alternates EMERGENCY and the home display. OR A talk prohibited tone sounds when the selected channel does not support emergency. 3 Press and hold the PTT button. Speak clearly into the microphone. 4 Release the PTT to end the transmission. To exit emergency at any time, press and hold the Emergency button. Sending a Silent Emergency Alarm 1 Press the preprogrammed Emergency button to activate the silent alarm feature. 2 The display does not change; the LED does not light up, and there is no tone. If silent emergency alarm is used with emergency call, pressing the PTT button exits the silent mode and initiates the emergency call. O Direct radio-to-radio communication or communication through a repeater. On = Direct Off = Repeater M K HOR. i j k This channel is being monitored. Voice muting the affiliated trunking talkgroup or selected conventional channel. On = Enabled Off = Disabled L = Radio is set at Low power. H = Radio is set at High power. Scanning a scan list. Blinking dot = Detects activity on the Priority-One Channel during scan. Steady dot = Detects activity on the Priority-

Two Channel during scan. The vote scan feature is enabled. m l G n o

{

On = Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = AES Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = Location feature enabled, and location signal available. Off = Location feature disabled. Blinking = Location feature enabled, but location signal unavailable. On = User is currently associated with the Off = User is currently not associated with radio. the radio. Blinking = Device registration or user registration with the server failed due to an invalid username or pin. Data activity is present. Indicates that the text entry is currently in hexadecimal mode. Receiving a call or data. Display Status Icons u t V Transmitting a call or data. The more stripes, the stronger the signal strength for the current site (trunking only). English Menu Navigation

< or > to Menu Entry. g directly below Menu Entry to select. H to exit.

< or > to scroll through sub-list. g directly below Menu Entry to select.