MN006039A01.fm Page 1 Wednesday, October 30, 2019 5:14 PM m WM500 Remote Speaker Microphone PMMN4127_ User Leaflet
*MN006039A01*
MN006039A01-AC MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2019 Motorola Solutions, Inc. All rights reserved. Printed in If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equip-
ment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. provoquer un brouillage nuisible aux communications radio. Cependant, il est impossible de garantir qu'il n'y aura aucune interfrence dans une installation particulire. Si cet appareil cause une interfrence nuisible la rception de la radio ou de la tlvision, ce qui peut tre dtermin en teignant et en allumant l'appareil, vous tes encourag remdier la situation en prenant une ou plusieurs des mesures suivantes :
Rorienter ou dplacer l'antenne rceptrice. Augmenter la distance entre l'quipement et le rcepteur. Brancher l'appareil dans une autre prise sur un circuit diffrent de celui du rcepteur. Consulter un revendeur ou un technicien de radio ou de tlvision chevronn pour obtenir de l'aide. Notice to Users (FCC and Industry Canada) This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following conditions:
This device may not cause harmful interfer-
ence. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. Suppliers Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:
Model Name: WM500 conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) Avis aux utilisateurs (FCC et Industrie Canada) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence et la partie 15 des rglements de la FCC :
Cet appareil ne doit pas causer d'inter-
frence nuisible. Cet appareil doit accepter toute inter-
frence reue, y compris les interfrences pouvant entraner un fonctionnement indsir-
able. Toute modification effectue cet appareil sans l'autorisation explicite de Motorola Solu-
tions peut annuler l'autorisation d'utiliser cet appareil. Dclaration de conformit du fourmisseur Rglement CFR 47 partie 2 section 2.1077(a) de la FCC Partie responsable Nom : Motorola Solutions, Inc. Adresse : 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Numro de tlphone : 1-800-927-2744 Dclare par les prsentes que le produit :
Nom de modle : WM500 sont conformes aux rglementations suivantes :
Partie 15, sous-partie B, section 15.107(a), 15.107(d) et section 15.109(a) des rglements de la FCC Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following conditions:
1. This device may not cause harmful inter-
ference. 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Appareil numrique de Classe B En tant que priphrique d'ordinateur personnel, cet appareil est conforme aux stipulations de la partie 15 des rglements de la FCC. Cet appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Son utilisation est assujettie aux deux conditions suivantes :
1. Cet appareil ne doit pas causer d'interfrence nuisible. 2. Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. AVIS:Cet quipement a fait l'objet de tests et a t dclar conforme aux limites tablies pour un appareil numrique de classe B, conformment la section 15 des rglements de la FCC. Ces limites sont fixes afin d'offrir une protection suffisante contre des interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de l'nergie de radiofrquence et, s'il n'est pas install ou utilis conformment aux instructions, il peut RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios Before using this product, read the RF Energy Exposure and Product Safety Guide that ships with the radio which contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation. Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radios volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. To protect your hearing:
Use the lowest volume necessary to do Turn up the volume only if you are in noisy your job. surroundings. Turn down the volume before connecting headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radios speaker directly against your ear. If you experience hearing discomfort, ringing in your ears, or speeches that are muffled, you should stop listening to your radio through your headset or earpiece, and have your hearing checked by your doctor.
!
Important Information Do not charge your accessory in temperature below 0 C (32 F) or above 45 C (113 F). Do not store your accessory in direct sunlight or where expected temperatures can exceed this range such as inside a parked car. C a u t i o n Storing your fully charged accessory in high temperature conditions may permanently reduce the life of the internal battery. Battery life may temporarily shorten in low-
temperature conditions. The Remote Speaker Microphone (RSM) should be stored between -10 C (14 F) and 30 C (86 F) to minimize battery permanent capacity loss. To prevent injury, do not disassemble, puncture, or crush the RSM because this action can cause the battery to short-
circuit. Do not expose or throw the RSM into heat Do not dispose the RSM into household or fire. waste. Do not fill the audio jack and USB charging port with water. If water enters the audio jack and/or USB charging port, remove water by shaking the RSM. Always cover the audio jack and USB charging port with a dust cap when not in use. RSM Overview 1 2 3 4 5 12 13 11 10 6 8 7 9 16 15 14 call) P1 Programmable button Push-To-Talk (PTT) button (for group Description Volume toggle Power Indicator Power button Table 1: RSM Overview and Description No. 1 2 3 4 5 Answer/End-Call button (for private call) 6 7 8 9 10 11 12 13 14 15 16 P4 Programmable button Audio/Bluetooth Indicator Channel Down button Channel Up button Charging port NFC Location Emergency button Microphone Audio jack Speaker Radio/Device Compatibility LEX Series SLN 1000 TLK 100 Other compatible non-Motorola Solutions devices Table 2: Compatible Parts and Accessories Part Number PMLN7560_ 42009312001 4205823V01 CB000756A01 Description Receive-only earpiece with translucent tube Belt Clip USB-C Cable (1 m) These accessories can be paired with a Kodiak Broadband PTT enabled device. Currently, the supported Kodiak feature is Operational Status Messaging (the additional features will be added in the future), please refer to your Kodiak User Guide for setup instructions. The MAC Address is located behind the belt clip and on top of individual box. Additional MAC Address labels are provided in the individual box. DRAFT MN006039A01.fm Page 2 Wednesday, October 30, 2019 5:14 PM Getting Started Before you start, fully charge the RSM. To charge, connect the USB charging cable to the RSM and plug it to an appropriate power outlet. Table 3: Charging Indicator Behavior Power Indicator Blinking reda Description Battery is low Battery is charging Solid red Solid green Battery is fully charged Blinking green More than 90% charged Rapid blinking Charging error red When RSM is not charging, read the following table to understand the indication. Table 4: Battery Indication Power Indication Rapid blinking red Description Battery level is critically low Blinking red Battery level is low Offa Battery is medium or high a. Press the Power button to get the status. Read the following table to understand the audio and Bluetooth status indication. Short press the Power button to determine the details status of the RSM. Table 5: Audio and Bluetooth Status Table 6: Status Indication Audio/
Bluetooth Indication Blinking in blue Solid blue Double blinking blue (Once) Solid red Description Enter pairing Disconnected Connected Mic muted Blinking in red Voice prompt/Tone mute Blinking in green Receiving incoming call Indicator Audio/
Bluetooth Power Status Description Double-blinking blue Double blinking green Double-blinking amber Connected Battery level is high Battery level is medium a. Charge the RSM immediately to prevent flat-
battery condition. Table 7: WM500 RSM Button Operations Button Power PTT State Off On Connected Not connected Power+PTT Power+Call button Call Button Volume+
Off On On call Connected Voice prompt/
Tone muted Short Press Long Press (>1.5 s) Very Long Press (>3s) N/A RSM turns on Kodiak pairing N/A N/A Power On N/A Enter pairing Power off PTT for Kodiak Group Call N/A N/A N/A N/A Reject call End call N/A Power on and clear PDL Enter/Exit Dark Mode N/A N/A N/A Volume increase by one step Volume ramp up Unmute voice prompt/Tone Not connected Switches language Incoming call Answer call Mic Mute Unpairing the RSM 1. While RSM is power off, press and hold the Power button and PTT buttons. 2. The blue LED blinks and a voice prompt from the RSM indicates that the paired device is Cleared. Pairing the RSM through Bluetooth 1. While RSM is power off, press and hold the Power button until you hear Power On followed by Searching for Host, and the blue LED blinks. 2. From the compatible device, search and select WM500 from the Bluetooth list. 3. Once the devices are paired successfully, a tone is played. 4. A voice prompt from the RSM indicates that the device is Connected. 5. For iPhone, choose RSM from the Bluetooth list and pair again for second time. Pairing the RSM through NFC 1. While RSM is power off, press and hold the Power button until you hear Power On followed by Searching for Host, and the blue LED blinks. 2. Align the NFC locations on both the RSM and the compatibles devices. 3. Check the compatible device for indication of successful pairing. Table 7: WM500 RSM Button Operations (Continued) Button State Short Press Long Press (>1.5 s) Very Long Press (>3s) Volume-
Connected Voice Prompt/
Tone unmuted at minimum volume Decrease volume by one step Volume ramp down Mute voice prompt/Tone Service and Warranty Other than the clip, the RSM is not repairable. The RSM is covered under the standard Motorola Solutions one-year limited warranty. Warranty Exclusion Motorola Solutions does not warrant the installation, maintenance or service of the Product, accessories, batteries or parts. Motorola Solutions will not be responsible in any way for problems or damage caused by any ancillary equipment or peripherals (specific examples include, but are not limited to: batteries, chargers, adapters, and power supplies) not furnished or manufactured by Motorola Solutions which is attached to or used in connection with the Product. When the Product is used in conjunction with ancillary or peripheral equipment not supplied by Motorola Solutions, Motorola Solutions does not warrant the operation of the Product/peripheral combination and Motorola Solutions will not honor any warranty claim where the Product is used in such a combination and it is determined by Motorola Solutions that there is no fault with the Product. Upon open or dismantle the Product, warranty is immediately voided. Motorola Solutions specifically disclaim any responsibility for any damage in any way caused by improper installation by un-authorized personnel. Open Source Software Legal Notices This product contains Open Source Software. For information regarding licenses, acknowledgments, required copyright notices, and other usage terms, visit http://
businessonline.motorolasolutions.com. Go to Resource Center > Product Information >
Manual > Accessories > Remote Speaker Microphones Recommended Wearing Position Refer to the Best Practices for Motorola Solutions Law Enforcement RSM at:
https://www.youtube.com/watch?v=82OvxqI0Vco NOTES FCC ID: AZ489FT6023 IC: 109U-89FT6023 Note: For better performance, wear the RSM and the device on the same side. DRAFT