FCC ID: VPYLB1MW Communication Module

1MW User Manual for FCC FCC ID:VPYLB1MW Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification

(installation procedure). The following information must be indicated on the host device of this module. Contains Transmitter Module FCC ID:VPYLB1MW or Contains FCC ID: VPYLB1MW This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 12 September 2017 1 1MW User Manual for FCC The following statements must be described on the user manual of the host device of this module;

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20 ppm This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 12 September 2017 2 1MW User Manual for FCC When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 12 September 2017 3 1MW User Manual for FCC When installing it in a portable equipment. Please describe the following warning to the manual. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. 1MW has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. It is necessary to take a SAR test with your set mounting this module (except to use only Bluetooth V4.2(BDR/EDR/LE)). Class II permissive change application is necessary using the SAR report. Please contact Murata. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 12 September 2017 4

Date: July 27, 2020 Letter of Authorization UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID : VPYLB1MW Applicant : Murata Manufacturing Co., Ltd. To whom it may concern:

Please be advised we authorize Shuichi Ohyama of Consumer Technology Division, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

July 27, 2020 Request for Class II Permissive Change Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID : VPYLB1MW Applicant : Murata Manufacturing Co., Ltd. To Whom It May Concern:

This is to request a Class II permissive change for FCC ID: VPYLB1MW, originally granted on 10/04/2017 and all its permissive changes. We have obtained Limited Modular Approval in Mobile configuration for this module. This time, it is used in the portable host devices (Digital Camera, N1932), therefore SAR testing with the host device was performed, and the Class II permissive change application in Portable configuration is submitted. When this module is installed, the following points are changed by the software of the host device.

- Output powers of WLAN 2.4GHz and 5GHz are partially reduced and it is tuned to operate at a lower power setting than the original output power.

- The frequency bands 5600-5640MHz(11a,11n-20,11ac-20), 5590-5630MHz(11n-40,11ac-40), 5610MHz(11ac-80), 5720MHz(11a,11n-20,11ac-20), 5710MHz(11n-40,11ac-40) and 5690MHz(11ac-80) are disabled. For details of this modification, please refer to the following documents. There is no change before and after change except for these documents. Test Report RF Exposure (SAR report) External Photo Internal Photo User Manual Label drawing/ location Block Diagram Theory of Operation Schematic Diagram Parts List This time, we confirmed that this product still meets the minimum requirements of the applicable rules of FCC. Thank you for your attention to this matter. Sincerely, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Confidentiality Date: July 27, 2020 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID : VPYLB1MW Applicant : Murata Manufacturing Co., Ltd. To whom it may concern:

Please be advised that the following information is to be held confidential based on the FCC rules 0.457 and 0.459:

Theory of Operation The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Short-Term Confidentiality Date: July 27, 2020 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID : VPYLB1MW Applicant : Murata Manufacturing Co., Ltd. To whom it may concern:

Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization based on the FCC rules 0.457 and 0.459:

Test Setup Photos The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ____________________________________ Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

muRata INNOVATOR IN ELECTRONICS Special Power of Attorney To whom it may concern:

I, MOTOO HAYASHI of Murata Manufacturing Co., Ltd. hereby appoint Kenji Hayashikoshi of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from April 15, 2020 unless specifically extended or terminated by either party. Date: April 15, 2020 Place: Japan MOTOO HAYASHI Murata Manufacturing/Co., Ltd.