app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2020-05-19
|
1 2 3 4 5 6
|
2019-06-21
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Murata Manufacturing Co., Ltd.
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0017033432
|
1 2 3 4 5 6
|
Physical Address |
10-1, Higashikotari 1-chome Nagaokakyo-shi
|
1 2 3 4 5 6
|
10-1, Higashikotari 1-chome
|
1 2 3 4 5 6
|
Kyoto, N/A
|
1 2 3 4 5 6
|
Kyoto, N/A 617-8555
|
1 2 3 4 5 6
|
Japan
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
D******@compliancetesting.com
|
1 2 3 4 5 6
|
c******@telefication.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
VPY
|
1 2 3 4 5 6
|
Equipment Product Code |
LB1VA
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
M******** H********
|
1 2 3 4 5 6
|
Title |
GENERAL MANAGER
|
1 2 3 4 5 6
|
Telephone Number |
81-75********
|
1 2 3 4 5 6
|
Fax Number |
81-75********
|
1 2 3 4 5 6
|
E-mail |
m******@murata.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6
|
Firm Name |
SGS Taiwan Ltd
|
1 2 3 4 5 6
|
Name |
J****** C****
|
1 2 3 4 5 6
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
1 2 3 4 5 6
|
Taiwan
|
1 2 3 4 5 6
|
Telephone Number |
886 2********
|
1 2 3 4 5 6
|
Fax Number |
886 2********
|
1 2 3 4 5 6
|
E-mail |
j******@sgs.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6
|
Firm Name |
SGS Taiwan Ltd
|
1 2 3 4 5 6
|
Name |
J******** C********
|
1 2 3 4 5 6
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
1 2 3 4 5 6
|
Taiwan
|
1 2 3 4 5 6
|
Telephone Number |
886 2********
|
1 2 3 4 5 6
|
Fax Number |
886 2********
|
1 2 3 4 5 6
|
E-mail |
j******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 | Yes |
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/11/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | DTS - Digital Transmission System |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Communication Module |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II permissive change. |
1 2 3 4 5 6 | Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz. DFS operation is slave without radar detection.
Class II permissive change. |
1 2 3 4 5 6 | Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes.
Class II permissive change. |
1 2 3 4 5 6 | Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz and 5775 MHz.
DFS operation is slave without radar detection. |
1 2 3 4 5 6 | Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz bandwidth modes. |
1 2 3 4 5 6 | Limited Single modular. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
EST Technology Co., Ltd.
|
1 2 3 4 5 6
|
Compliance Certification Services Inc. Wugu Lab.
|
1 2 3 4 5 6
|
Name |
I**** H****
|
1 2 3 4 5 6
|
H******** L******
|
1 2 3 4 5 6
|
Telephone Number |
+86 0******** Extension:
|
1 2 3 4 5 6
|
886-2******** Extension:
|
1 2 3 4 5 6
|
Fax Number |
+886-********
|
1 2 3 4 5 6
|
E-mail |
i******@gdest.cn
|
1 2 3 4 5 6
|
h******@sgs.com
|
|