FCC ID: VPYLB1VY934 Communication module

Type1VY-934 User Manual for FCC FCC ID:VPYLB1VY934 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with below part 15 of FCC Rules. Part 15 Subpart C Part 15 Subpart E The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. This module designed for mounting inside of the end product by us professionally. Therefore, it complies with the antenna and transmission system requirements of 15.203. Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. This module needs to supply a regulated voltage from host device. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 1 Type1VY-934 User Manual for FCC This manual is based on KDB 996369, which is designed to ensure that module manufacturer correctly communication the necessary information to host manufacturers that incorporate their modules. INTEGRATION INSTRUCTIONS 1. General: Applicable Sections 2 through 10 describe the items that must be provided in the integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. This Modular transmitter applicant(muRata) should include information in their instructions for all these items indicating clearly when they are not applicable. 2. List of applicable FCC rules: Applicable This device complies with below part 15 of FCC Rules. Part 15 Subpart C Part 15 Subpart E Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 2 Type1VY-934 User Manual for FCC 3. Summarize the specific operational use conditions : Applicable This module designed for mounting inside of the end product by us professionally. Therefore, it complies with the antenna and transmission system requirements of 15.203. 4. Limited module procedures : Applicable This module needs to supply a regulated voltage from host device. Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 3 Type1VY-934 User Manual for FCC 5. Trace antenna designs : Applicable Please perform the Trace antenna design that followed the specifications of the antenna. The concrete contents of a check are the following three points. It is the same type as the antenna type of antenna specifications. Confirm the same size as the Gerber file. An antenna gain is lower than a gain given in antenna specifications. Measure the gain, and confirm the peak gain is less than the application value. The emission level is not getting worse. Measure the spurious, and confirm degradation of less than 3dB than spurious value of worst of report used for the application. However it is spurious defined below. Please send those reports to Murata. And please refer Antenna in Section 6 of the installation manual. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 4 Type1VY-934 User Manual for FCC 6. RF exposure considerations : Applicable This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. When the host is a portable device, it is necessary to take a SAR test with your set mounting this module.

(except to use only Bluetooth LE or 2.4GHz-WLAN) Class II permissive change application is necessary using the SAR report. Please contact Murata (www.murata.com). And an application for a Class II permissive change from a Mobile equipment to a Portable equipment is also required. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 5 Type1VY-934 User Manual for FCC 7. Antennas : Applicable Antenna Port Antenna model Name Antenna Type connector Antenna Gain Chain0 Antenna0 1VY DC1231

[2.4GHz] Monopole antenna

[5GHz] Monopole antenna N/A N/A

+2.0 dBi

+1.9 dBi Chain1 Antenna1 1VY DC1231

[2.4GHz] Monopole antenna

(RF cable: 30 ~ 315 mm) I-PEX: 20449-001E

*1

+2.0 ~ +1.4 dBi

[5GHz] Monopole antenna

(RF cable: 30 ~ 315 mm) I-PEX: 20449-001E

*1

+1.3 ~ -1.3 dBi

*1: The connector is present, but the feed point is the soldered land portion of the module's RFOUT terminal Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 6 Type1VY-934 User Manual for FCC 8. Label and compliance information : Applicable The following statements must be described on the user manual of the host device of this module;

Contains Transmitter Module FCC ID:VPYLB1VY934 or Contains FCC ID: VPYLB1VY934 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20 ppm This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 7 Type1VY-934 User Manual for FCC When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. When installing it in a portable equipment. Please describe the following warning to the manual. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. Type1VY-934 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. It is necessary to take a SAR test with your set mounting this module (except to use only Bluetooth V4.2(LE)). Class II permissive change application is necessary using the SAR report. Please contact Murata (www.murata.com). Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 8 Type1VY-934 User Manual for FCC 9. Information on test modes and additional testing requirements: Applicable Please check the installation manual first. Please contact Murata (www.murata.com) if you have any questions when conducting the RF certification test on the host. We (Murata) are ready to present the control manual and others for the RF certification test. 10. Additional testing, Part 15 Subpart B disclaimer : Applicable The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 9 Type1VY-934 User Manual for FCC 11. Note EMI Considerations : Applicable Note that a host manufacture is recommended to use KDB 996369 D04 Module Integration Guide recommending as

"best practice" RF design engineering testing and evaluation in case non-linear interactions generate additional non-compliant limits due to module placement to host components or properties. For standalone mode, reference the guidance in D04 Module Integration Guide and for simultaneous mode7; see D02 Module Q&A Question 12, which permits the host manufacturer to confirm compliance. 12. How to make changes: Applicable When changing from the conditions of approval, please present technical documentation that it is equivalent to a Class change. For example, when adding or changing an antenna, the following technical documents are required. 1)The document indicating the same type as the original antenna 2)Technical document showing that the gain is the same or lower than the gain at the time of the original approval 3)Technical document showing that the spurious is no more than 3 dB worse than when it was originally certified Copyright Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 10

Type1VY-934 Label design 1. Display on module Due to its small size, it is not possible to display the FCC ID or IC Number on the module. Therefore, they are indicated in manuals and packaging materials. 2. Display on package FCC ID: VPYLB1VY934 IC: 772C-LB1VY934 HVIN: Type1VY-934 R xxx-xxxxxx XXXXXXXXXXXXXXXXXXXXX

Date: December 23, 2022 Federal Communications Commission 45 L Street NE Washington, DC 20554 FCC ID Applicant

: VPYLB1VY934

: Murata Manufacturing Co., Ltd. To whom it may concern:

Since this module is so small to label with a font size that is four-points or larger and it does not utilize electronic labeling, the FCC ID is placed in the user manual and the packaging according to KDB784748. For the details, please refer to the other Label and Location document(s) and External Photo. Sincerely Yours, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Date: Feb. 8, 2023 FCC ID: VPYLB1VY934 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA FCC US Agent Murata Electronics North America, Inc. FRN: 24753089 2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. Jue Chang jue.chang@murata.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Murata Manufacturing Co., Ltd. (the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours,

CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Date: June 22, 2023 FCC ID: VPYLB1VY934 Grantee FRN: 0017033432 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA FCC US Agent Agent Company Name: Murata Electronics North America, Inc. FRN: 0024753089 Agent US Address: 2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. Agent Contact Person: Mark Tucker Agent Email Address: mtucker@murata.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Murata Manufacturing Co., Ltd. (the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Signature:

Mark Tucker Murata Electronics North America, Inc.

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: 02-07-2023 FCC ID: VPYLB1VY934 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA Murata Manufacturing Co., Ltd. (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

Jue Chang Murata Electronics North America, Inc. 2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. jue.chang@murata.com Sincerely yours, Name:

Kenji Hayashikoshi Job Title:

Senior Manager Company Name: Murata Manufacturing Co., Ltd.

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: June 22, 2023 FCC ID: VPYLB1VY934 Grantee FRN: 0017033432 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA Murata Manufacturing Co., Ltd. (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. US Agent Information:

Agent Company Name: Murata Electronics North America, Inc. FRN: 0024753089 Agent US Address: 2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. Agent Contact Person: Mark Tucker Agent Email Address: mtucker@murata.com Sincerely yours, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Letter of Authorization Date: March 1, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Murata Manufacturing Co., Ltd. FCC ID: VPYLB1VY934 To whom it may concern:

We, the undersigned, hereby authorize Shuichi Ohyama of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Class II Permissive Change March 1, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID : VPYLB1VY934 Applicant : Murata Manufacturing Co., Ltd. To Whom It May Concern:

This is to request a Class II permissive change for FCC ID: VPYLB1VY934 granted on 02/26/2023. We have obtained Limited Modular Approval in Mobile configuration for this module. This time, it is used in the portable host devices (Digital Camera, 6506), therefore SAR testing with the host device was performed, and the Class II permissive change application in Portable configuration is submitted. 5 GHz Wireless LAN W56 (5500-5720 MHz) is disabled by software of host devices. For details of this modification, please refer to the following documents. There is no change before and after change except for these documents. Test Report ( ) RF Exposure (SAR report) External Photo Internal Photo User Manual Label drawing/ location Block Diagram Theory of Operation Schematic Diagram Parts List This time, we confirmed that this product still meets the minimum requirements of the applicable rules of FCC. Thank you for your attention to this matter. Sincerely, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Confidentiality Date: March 1, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant : Murata Manufacturing Co., Ltd. FCC ID : VPYLB1VY934 To whom it may concern:

Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459:

Theory of Operation The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Short-Term Confidentiality Date: March 1, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID : VPYLB1VY934 Applicant : Murata Manufacturing Co., Ltd. To whom it may concern:

Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization based on the FCC rules 0.457 and 0.459:

External Photos Test Setup Photos The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ____________________________________ Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

CFR 47 2.911 (d)(5) Attestation Date: 02-07-2023 FCC ID: VPYLB1VY934 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA Murata Manufacturing Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Murata Manufacturing Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name:

Kenji Hayashikoshi Job Title:

Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Request for Limited Modular Transmitter Approval February 1, 2023 FCC ID : VPYLB1VY934 Applicant : Murata Manufacturing Co., Ltd. This transmitter, model: Type1VY-934 is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below:

Modular Approval Checklist:

Modular approval requirement

(1) Have its own RF shielding.

(2) Have buffered modulation/data inputs.

(3) Have its own power supply regulation. Yes No This module has the power supply regulator. However the one of input voltages to RF part dont go through the regulator. The stable voltage will be supplied by end product. Therefore end product will be required to have the power supply regulator.

(4) Comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c).

(5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available.

(6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Since this module is so small to label with a font size that is four-

points or larger and it does not utilize electronic labeling, the FCC ID is placed in the user manual and the packaging according to KDB784748.

(7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.

(8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Type1VY-934 Installation Manual FCC ID of this product is as follows. FCC ID: VPYLB1VY934 IC No. of this product is as follows. IC: 772C-LB1VY934 Contents 1.Land Pattern (Recommended) 2.PIN Layout 3.Supply Voltage 4.Power Levels 5.Theory of operation 6. Antenna Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 1 1.Land Pattern TOP View (Recommended) Unit : mm Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 2 2.PIN Layout Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 3 3.Supply Voltage Type1VY_PIN_Na me VDD_3P3 SWREG_IN VDD_FEM VDDIO_GPIO *

VDD_AO *

Min. 3.135 3.135 3.135 3.14 1.71 3.14 1.71 Typ. 3.3 3.3 3.3 3.3 1.8 3.3 1.8 Max. 3.465 3.465 3.465 3.46 1.89 3.46 1.89 unit V V V V V

*VDD_3P3, SWREG_IN and VDD_FEM needs to supply a regulated voltage from host device.

*VDDIO_GPIO and VDDIO_AO dont influence the RF characteristic. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 4 4. Power Levels

(Per Antenna port) mode Rate Channel MAXIMUM TUNE UP TOLERANCE [dBm]

IEEE 802.11b IEEE 802.11g IEEE 802.11n (HT20) All Rate 1~11 IEEE 802.11a IEEE 802.11n (HT20/40) IEEE 802.11ac (VHT20/40/80) All Rate

(W52/W53) 36~64

(W56) 100~144

(W58) 149~165 9.5 9.5 Mode LE MAXIMUM TUNE UP TOLERANCE [dBm]

7.9 Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 5 5. Theory of Operation Frequency of operation 2.4GHz 11b/g/n (HT20) 2412-2462MHz W52 11a/n/ac ((V)HT20) 5180-5240MHz 11n/ac ((V)HT40) 5190-5230MHz 11ac (VHT80) 5210MHz W53 11a/n/ac ((V)HT20) 5260-5320MHz 11n/ac ((V)HT40) 5270-5310MHz 11ac (VHT80) 5290MHz W56 11a/n/ac ((V)HT20) 5500-5720MHz

(*ISED:5600-5650MHz disable) Scan Active Active Active Active Passive Passive Passive Passive 11n/ac ((V)HT40) 11ac (VHT80) 5510-5710MHz

(*ISED:5600-5650MHz disable) Passive 5530-5690MHz

(*ISED:5600-5650MHz disable) Passive W58 11a/n/ac ((V)HT20) 5745-5825MHz 11n/ac ((V)HT40) 5755-5795MHz 11ac (VHT80) 5775MHz Active Active Active End users can not modify the software because F/W & driver are installed in device. Ad-hoc mode Yes Yes Yes Yes No No No No No No Yes Yes Yes Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 6 6.Antenna Please perform the antenna design that followed the specifications of the antenna. About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change"

which the authorities define then. The concrete contents of a check are the following three points. It is the same type as the antenna type of antenna specifications. An antenna gain is lower than a gain given in antenna specifications. The emission level is not getting worse. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 7 6.Antenna Use the antenna below.

< Chain0 > (Main Antenna) Pattern on Board Part number: Antenna0 1VY DC1231 Use the following design on your board to build your antenna. 7.1 1

. 1 1.1 0.5 7.15 6.65 0.6 5 3

. 4 1.4 2.25 5 0

. 6 0.5 6.3 1.5 0.5 RF line-GND layer thickness Sub antenna: 215um

* Design the RF line at 50 ohms. 1.825 0.3 2.2 3

. 0 6.475 4.375 Line width = 0.5mm 4.84 5 7

. 0 width 0.3 Pin name: ANT0 Pin name: ANT1 A sub-antenna is connected here.

(Connector P/N: 20449-001E [maker: I-PEX]) Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 8 6.Antenna Use the antenna below.

< Chain1> (Sub Antenna) Pattern on flexible substrate + RF cable (External antenna) Part number: Antenna1 1VY DC1231 (* including cable) Cables length : from 30 to 315mm are available.

(Connector P/N: 20449-001E [maker: I-PEX]) cable joint 7.395 6.7 1.36

. 4 9 5 0 6

. 5 2 1

. 5 4 4

. 6.3 10.3 2.55 10.1 1.5 2.275

. 0 0 1 Unit: mm Line width = 0.5mm RF line-GND layer thickness Sub antenna: 38.5um

* Design the RF line at 50 ohms. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 9 6.Antenna Recommended constant P/N Memo Tuning 1 Tuning 2 Tuning 3 Tuning 4 Matching circuit Shunt 1 Series 1 Shunt 2 Series 2 Shunt 3 Series 3 Shunt 4 Antenna0 1VY DC1231 Pattern Antenna 0ohm 0.3pF None None 820ohm 5.6ohm 820ohm 0ohm None 1.1nH 0.2pF Antenna1 1VY DC1231 Sub Antenna

(Cable length = 30mm) Sub Antenna

(Cable length = 315mm) 4.7nH 0.5pF 0.1pF 0.1pF 1kohm 4.7ohm 1kohm 0ohm None 1.0nH 0.3pF 4.7nH 0.5pF 0.1pF 0.1pF 680ohm 6.8ohm 680ohm 0ohm None 1.0nH 0.3pF Tuning 3 Tuning 4 Tuning 1 Series 1 Series 2 Shunt 4 Shunt 1 Shunt 3 Series 3 Tuning 2 Shunt 2 Tuning 2 Series 1 Shunt 2 Shunt 5 Series 4 Shunt 6 Tuning 1 Tuning 3 Shunt 1 Tuning 4 Series 2 Shunt 3 Series 3 Shunt 4 Copyright Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 10