FCC ID: VPYLB1XK Communication Module

LBEE5CJ1XK User Manual for FCC Model Name: LBEE5CJ1XK FCC ID: VPYLB1XK Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure) The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the end users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in User manual. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with below part 15 of the FCC Rules. Part 15 Subpart C Part 15 Subpart E Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 29 July 2021 1 LBEE5CJ1XK User Manual for FCC Antenna list. Part number Vendor Type Connector Peak Gain(dBi) 2.4GHz 5GHz 146153 146187 Molex Molex LBEE5CJ1XK-Antenna Murata 3.2 3.4 3.6 4.25 4.75 4.6 Dipole Dipole Monopole U.FL U.FL

Copyright Murata Manufacturing Co., Ltd. All rights reserved. 29 July 2021 2 LBEE5CJ1XK User Manual for FCC The following information must be indicated on the host device of this module. Contains Transmitter Module FCC ID: VPYLB1XK or Contains FCC ID: VPYLB1X This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 29 July 2021 3 LBEE5CJ1XK User Manual for FCC The following statements must be described on the user manual of the host device of this module;

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When installing it in a mobile equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. When installing it in a portable equipment. It is necessary to take a SAR test with your set mounting this module. Class II permissive change application is necessary using the SAR report. Please contact Murata. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 29 July 2021 4 LBEE5CJ1XK User Manual for FCC Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20 ppm Copyright Murata Manufacturing Co., Ltd. All rights reserved. 29 July 2021 5

LBEE5CJ1XK Label Design to FCC 9.1mm LBEE S S 1 2 3 4 5 6 7 BBBBBBBBB 0.8mm 0.8mm 0.8mm 1.1mm 0.6mm m m 3 8

. m m 8 2

. FCC ID : VPYLB1XK Since there is no space which indicates FCC ID, FCC ID is indicated in a manual.

: Prohibition labeling area (0.5mm) 2.8mm Name of manufacture(Murata Logo mark) LBEE5CJ1XK SSXXXXXXX BBBBBBBBB Model Name abbreviation Inspection Number Serial Number Pin 1 Marking 2D Code Copyright Murata Manufacturing Co., Ltd. All rights reserved. 12 July 2021 1

LBEE5CJ1XK Package Label Design The character size is 4 points or more. FCC ID:VPYLB1XK IC: 772C-LB1XK HVIN:LBEE5CJ1XK This device complies with part 15 of FCC Rules and Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme la partie 15 des rgles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, mme si le brouillage es t susceptible d'en compromettre le fonctionnement. The HVIN notation should be as follows. When module LBEE5CJ1XK is used HVIN: LBEE5CJ1XK When module LBEE5CJ2XK is used HVIN: LBEE5CJ2XK Notation requirement areas of other countries. CONFIDENTIAL Copyright Murata Manufacturing Co., Ltd. All rights reserved. 29 July 2021 1

FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name: Murata Manufacturing Co., Ltd. Address:

City:

Country:

10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555, Japan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: VPYLB1XK Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: Ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. Planned Release Date STC: 180 days (notes 2, 3, 4, 5) Date: July 28, 2021 Name and signature of applicant: Kenji Hayashikoshi Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160, Issue 04 Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

MURATA MANUFACTURING CO., LTD. 10-1, Higashikotari 1-chome, Nagaokakyo-shi Kyoto Japan 617-8555 Name Representative of agent: Jim Chang Agent Company name: SGS Taiwan Ltd. Address: 134, Wu Kung Road, Wu ku Industrial Zone TW- New Taipei City 24803 City: New Taipei City Country: Taiwan is authorized to apply for Certification of the following product(s):

Product description: Communication Module Type designation:

Trademark:

LBEE5CJ1XK, LBEE5CJ2XK muRata Validity/ expiry date : November 1, 2021 on our behalf. Date: 2021/7/30 City: Kyoto Name: Kenji Hayashikoshi Function: Senior Manager Signature:

Declaration Date: May 26, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We declare that this equipment (Product Name: Communication Module, FCC ID:

VPYLB1XK) complies with e-CFR Title 47 Part 2.925 (f), as it is too small to be labeled with FCC ID (smaller than 4 points). Hence the FCC ID is placed in user manual instead of being affixed on the equipment. Thank you, Name: Kenji Hayashikoshi Title: Senior Manager Telephone: +81-75-955-6736 Signature: ________________

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: VPYLB1XK Items to be covered by Single modular transmitters. 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-

modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). 8. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Answer from applicant Yes, the EUT provides the RF shielding The module and data input(s) are buffered. The EUT has buffered data inputs, it is integrated in IC chip. Yes, a stable voltage is supplied the power supply due to the RF of IW416 in the module. The EUT meets the FCC antenna Requirements. Instructions are described in Operational Description. The modular transmitter has been performed the testing in a state of being installed on a test jig board simulating the board of the installed end product. It has been performed the testing as a stand-alone and then confirmed the compliance. The module and antenna will be mounted on a board similar to the one shown in the test set photo, and the board will be installed in the end product. No Due to the small size of this module, the FCC ID cannot be printed on the module body. Post the FCC ID in the User manual. The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are given in the User Manual. The EUT is comply with RF exposure re requirement. RF exposure is addressed in the User Manual Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Kenji Hayashikoshi, Senior Manager Date:July 28, 2021 Signature: _ ___________

muRata INNOVATOR IN ELECTRONICS Special Power of Attorney To whom it may concern:

I, MOTOO HAYASHI of Murata Manufacturing Co., Ltd. hereby appoint Kenji Hayashikoshi of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from April 15, 2020 unless specifically extended or terminated by either party. Date: April 15, 2020 Place: Japan MOTOO HAYASHI Murata Manufacturing/Co., Ltd.

The difference between LBEE5CJ1XK and LBEE5CJ2XK FCC/EU MODEL NAME ISED HVIN LABEL of module Model name in the user manual Antenna configuration Main model LBEE5CJ1XK Family model LBEE5CJ2XK LBEE5CJ1XK: main operation is Shared BT Antenna, sub operation is Dedicated BT Antenna. LBEE5CJ2XK: main operation is Dedicated BT Antenna, sub operation is Shared BT Antenna. Shared BT Antenna setting Dedicated BT Antenna setting The hardware of the modules is the same, the antenna connection is different. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 20 July 2021 1

WIFI Channel 12 & 13 Declaration Letter Date: 2021/7/28 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: VPYLB1XK To who it may concern, we have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability. Please check Product hardware does not have the capability to operate on channel 12 &

13. Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Compliance is demonstrated in test report as the maximum transmit power is properly adjusted to comply with the out-of-band emission requirements in Part 15.247. The device is a WiFi client device that is not able to operate at different power levels as the default setting, which is not accessible to third-party. Others Pls explain detail here. Signature:

Name (Printed): Kenji Hayashikoshi Title: Senior Manager On behalf of Company: Murata Manufacturing Co., Ltd. Telephone: +81-75-955-6173 Address: 10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555, Japan

To whom it may concern, we declare below featured for equipment authorization regarding DTS-UNII Device Declaration Letter Date July 28, 2021:

FCC ID: VPYLB1XK

(1) DFS Device --

Master, Client with Radar detection capability, Client without radar detection capability, N/A

(2) Active / Passive Scanning Frequency Band(MHz) 2412 - 2462 5150 - 5250 5250 - 5350 5470 - 5725 5725 - 5850 Active Scanning

(able to select a channel and initiate a network by sending enabling signals to other devices) Passive scanning

(not able to initiate a network) Non Applicable Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Country code selection ability - Yes , No

(3) If yes, pls explain how it was implemented : Country code is factory set and cannot be changed by end users. Signature:

Title / Name (Printed): Senior Manager, Kenji Hayashikoshi