FCC ID: VPYLB1ZM Communication Module

LBEE5QD1ZM User Manual for FCC

FCC ID:VPYLB1ZM

Since this module is not sold to general end users directly, there is no user manual of

module.

For the details about this module, please refer to the specification sheet of module.

This module should be installed in the host device according to the interface specification

(installation procedure).

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 November 2020

1

LBEE5QD1ZM User Manual for FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

This device complies with below part 15 of FCC Rules.

Part 15 Subpart C

Part 15 Subpart E

The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules)

listed on the grant, and the host product manufacturer is responsible for compliance to any other

FCC rules that apply to the host not covered by the modular transmitter grant of certification.

The final host product still requires Part 15 Subpart B compliance testing with the modular

transmitter installed.

This module designed for mounting inside of the end product by us professionally.

Therefore, it complies with the antenna and transmission system requirements of §15.203.

Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual.

If the FCC ID is not visible when the module is installed inside another device,

then the module is installed must also display a label referring to the enclosed module.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 November 2020

2

LBEE5QD1ZM User Manual for FCC

Supported Antenna

No.

Maker

P/N

Form factor

Type

Size

Detail

Supported Antenna

Gain [dBi]

2.4GHz

5GHz

Molex

146153

u.FL/flexible

Dipole

3.2

4.25

35 x 9 x 0.1 mm

Molex

146187

u.FL/flexible

Dipole

3.4

4.75

40.95 x 9 x 0.7 mm

1

2

Flexible//

horizontal

Rigid //

horizontal

3

Murata

Trace(Pattern) monopole

3.6

4.6

LBEE5QD1ZM-Antenna

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 November 2020

3

LBEE5QD1ZM User Manual for FCC

●The following statements must be described on the user manual of the host device

of this module;

Contains Transmitter Module FCC ID:VPYLB1ZM

or

Contains FCC ID: VPYLB1ZM

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed down through the MAC, through the digital

and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the

only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the

packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In

other words, this device automatically discontinue transmission in case of either absence of information to transmit

or operational failure.

Frequency Tolerance: ±20 ppm

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 November 2020

4

LBEE5QD1ZM User Manual for FCC

●When installing it in a mobile equipment. Please describe the following warning to the manual.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio

frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more

away from person’s body.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 November 2020

5

LBEE5QD1ZM User Manual for FCC

●When installing it in a portable equipment. Please describe the following warning to the manual.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low

levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health

effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health

effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not been confirmed by additional research. Type1VY has been tested and

found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines.

It is necessary to take a SAR test with your set mounting this module (except to use only Bluetooth (BDR/EDR/LE)).

Class II permissive change application is necessary using the SAR report. Please contact Murata.

Note)

Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm.

Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.

Copyright © Murata Manufacturing Co., Ltd. All rights reserved.

30 November 2020

6

LBEE5QD1ZM User Manual for FCC FCC ID:VPYLB1ZM Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification

(installation procedure). Copyright Murata Manufacturing Co., Ltd. All rights reserved. 01 December 2022 1 LBEE5QD1ZM User Manual for FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with below part 15 of FCC Rules. Part 15 Subpart C Part 15 Subpart E The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. This module designed for mounting inside of the end product by us professionally. Therefore, it complies with the antenna and transmission system requirements of 15.203. Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 01 December 2022 2 LBEE5QD1ZM User Manual for FCC Supported Antenna Supported Antenna No. Maker Gain [dBi]

P/N Form factor Size 2.4GHz 5GHz 1 Molex 2119640001 Chip 2.7 2.2 3.2 x 1.6 x 1.2 mm Copyright Murata Manufacturing Co., Ltd. All rights reserved. 01 December 2022 3 LBEE5QD1ZM User Manual for FCC The following statements must be described on the user manual of the host device of this module;

Contains Transmitter Module FCC ID:VPYLB1ZM or Contains FCC ID: VPYLB1ZM This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20 ppm This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 01 December 2022 4 LBEE5QD1ZM User Manual for FCC When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 01 December 2022 5 LBEE5QD1ZM User Manual for FCC When installing it in a portable equipment. Please describe the following warning to the manual. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. Type1VY has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines. It is necessary to take a SAR test with your set mounting this module (except to use only Bluetooth (BDR/EDR/LE)). Class II permissive change application is necessary using the SAR report. Please contact Murata. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 01 December 2022 6

LBEE5QD1ZM Label Design and Location 10.2mm LBEEQDZM S S 1 2 3 4 5 6 7 BBBBBBBBB 0.8mm 0.8mm 0.8mm 1.2mm 0.6mm There is no space to describe the FCC ID /

ISED IC Number. Therefore it is described on the manual and package. m m 3 9

. m m 8 2

. 2.8mm Name of manufacture(Murata Logo mark) LBEE5QD1ZM Model Name abbreviation SSXXXXXXX BBBBBBBBB Inspection Number Serial Number Pin 1 Marking 2D Code Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 October 2020 1

RF_160, Issue 04 Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome, Nagaokakyo-shi Kyoto 617-8555 Japan Kyoto Japan Name Representative of agent:

Agent Company name:

Address:

City:

Country Kevin Tsai (1) Compliance Certification Services Inc. No. 11. Wugong 6th Road New Taipei City Taiwan is authorized to apply for Certification of the following product(s):

Product description: Communication Module Type designation:

Trademark:

Validity/ expiry date: February 28, 2023 LBEE5QD1ZM muRata on our behalf. Date: November 21, 2022 City: Kyoto Name: Kenji Hayashikoshi Function: Senior Manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Roads, Columbia, MD 21046 Dear Examiner, This is to request a Class II permissive change for FCC ID: VPYLB1ZM, original grant date:

01/21/2021 The reasons for this change are as below:

1. To add a chip antenna Based on above, radiated test has been retested. Sincerely, By:

_________________________________ Kenji Hayashikoshi

(Signature/Title)

(Print name) Dev. Sec. 6 Senior Manager, Connectivity Module Dev. Dept., Communication Module Div.

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name: Murata Manufacturing Co., Ltd. Address:

617-8555 Japan 10-1, Higashikotari 1-chome, Nagaokakyo-shi, Kyoto To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: VPYLB1ZM Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-

Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: Ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. Planned Release Date STC: 180 days (notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Date: 01 December 2022 Name and signature of applicant: Kenji Hayashikoshi Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: VPYLB1ZM Items to be covered by Single modular transmitters. 1. The modular transmitter must have its own RF shielding. Answer from applicant Yes. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the Yes. module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). 8. there are very strict operational and 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes. Yes. Yes. Yes. No. Since this module is small in size, there is no space to write the ID. We will list the ID in the manual. Yes. RF_734_02 04 April 16 Answer from applicant Items to be covered by Split modular transmitters. 1. The modular transmitter must comply with all requirements of a single modular transmitter except for items (1) & (5) of the above single modular approval requirements. 2. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signalling amplitude of 150 mV peak-to-peak. 3. Control information and other data may be exchanged between the transmitter control elements and radio front end. 4. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. 5. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Kenji Hayashikoshi Date: 24 November 2020 Signature: ___________________________

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name: Plantronics, Inc. Address:

City:

Country:

345 Encinal Street, Santa Cruz, CA 95060 USA Santa Cruz USA Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: VPYLB1ZM Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-

Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: Ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. Planned Release Date STC: 180 days (notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Name and signature of applicant: Kenji Hayashikoshi Date: 30 November 2020 Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period