FCC ID: VPYLB2FJ Communication Module

Type2FJ User Manual for FCC FCC ID:VPYLB2FJ Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). The following information must be indicated on the host device of this module. Contains Transmitter Module FCC ID:VPYLB2FJ or Contains FCC ID: VPYLB2FJ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018 1 Type2FJ User Manual for FCC The following statements must be described on the user manual of the host device of this module;

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When installing it in the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018 2

Type2FJ Label <Surface>

J F 2 e p y T 9.4mm 6.8mm Metal case(6.8mm*9.4mm) i a n h C n i e d a M X X X X X X X S S 10mm 21mm Copyright Murata Manufacturing Co., Ltd. All rights reserved. 26 August 2022 1 Surface Meaning of each symbol Symbol Meaning Type2FJ SSXXXXXXX Made in China YYY Applicant and Manufacturer Logo Application Model Name Inspection number Country of origin Manufacturer management number 2D code

(Manufacturer PL information) Copyright Murata Manufacturing Co., Ltd. All rights reserved. 26 August 2022 2 Type2FJ Label <Back>

Font size 2.5point Font size 2.5point FCC ID:VPYXXXXX IC:772C-XXXXX IC FCC 2mm CMIIT ID: XXXXXXXXXX(M) XXXXXXXXXXXXXXXXXX XXXXXX XXXXXXXXXX Font size 2.5point Argentine 3.0mm Korea Font size 2.5point Brazil China Font size 2.5point Japan 2.3mm Copyright Murata Manufacturing Co., Ltd. All rights reserved. 26 August 2022 3 Back Meaning of each symbol Symbol FCC ID:VPYXXXXX IC:772C-XXXXX XXXXXXXXXXXXXXXXXX CMIIT ID: XXXXXXXXXX(M) XXXXXX Meaning FCC ID IC number Brazil certification number China certification number Argentine certification number South Korea certification number XXXXXXXXXX Japan certification number Copyright Murata Manufacturing Co., Ltd. All rights reserved. 26 August 2022 4

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name: Murata Manufacturing Co., Ltd. Address:

City:

Country:

10-1, Higashikotari 1-chome, Nagaokakyo-shi, 617-8555 Kyoto Japan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: VPYLB2FJ Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-

Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: Ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. Planned Release Date STC: 180 days Date: 29 September 2022 Name and signature of applicant: Kenji Hayashikoshi Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160, Issue 04 Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome, Nagaokakyo-shi 617-8555 Kyoto Japan Name Representative of agent:

Agent Company name:

Address:

City:

Country Kevin Tsai (1) Compliance Certification Services Inc. No. 11. Wugong 6th Road New Taipei City Taiwan is authorized to apply for Certification of the following product(s):

Product description: Communication Module Type designation: Type2FJ Trademark:

muRata Validity/ expiry date: 2022/12/31 on our behalf. Date:

City:

Name:

July 11, 2022 Kyoto Kenji Hayashikoshi Function:

Senior Manager Signature:

. Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

RF_734_03 26 March 2020 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: _VPYLB2FJ_ Items to be covered by Single modular transmitters. 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Answer from applicant Yes, the EUT provides the RF shielding

. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. 3. The module must contain power supply regulation on the module 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). 5.The module must demonstrate compliance in a stand-alone configuration. 6.The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). 7.The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. 8.The module must comply with RF exposure requirements. Yes, the module and data input(s) are buffered. The EUT has buffered data inputs, it is integrated in IC chip. Yes, this module has its own internal power supply regulation function. Yes, the antenna is a non-removable structure formed on the board of this module. Yes, this modular transmitter has been performed the testing as a stand-alone and then confirmed the compliance. Yes, FCC ID is formed and marked on the board of the module. Yes, the EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are given in the User Manual. Yes, the EUT is comply with RF exposure re requirement. RF exposure is addressed in the User Manual. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Kenji Hayashikoshi Date: _2022/9/26_ Signature: