FCC ID: VPYLBCA1KU1WA Communication Module

Internal Photo Report No.: 1910WSU012-UE

(1) EUT Photo

(2) EUT Photo 1 of 1

For Chip Antenna

(1) EUT Photo (Test Fixture and EUT) External Photo Report No.: 1910WSU012-UE

(2) EUT Photo (Test Fixture and EUT) 1 of 7

(3) EUT Photo (Test Fixture and EUT) Report No.: 1910WSU012-UE

(4) EUT Photo (Test Fixture and EUT) 2 of 7

(5) EUT Photo (Test Fixture and EUT) Report No.: 1910WSU012-UE 3 of 7 For Pattern Antenna

(6) EUT Photo (Test Fixture and EUT) Report No.: 1910WSU012-UE

(7) EUT Photo (Test Fixture and EUT) 4 of 7

(8) EUT Photo (Test Fixture and EUT) Report No.: 1910WSU012-UE

(9) EUT Photo (Test Fixture and EUT) 5 of 7

(10) EUT Photo (Test Fixture and EUT) Report No.: 1910WSU012-UE

(11) EUT Photo 6 of 7

(12) EUT Photo Report No.: 1910WSU012-UE 7 of 7

LBCA1KU1WA - Label Design 2019/11/21 muRata Confidential 0.8mm 0.5mm 1 W A 0.6mm 0

. 6 m m FCC ID: VPYLBCA1KU1WA IC: 772C-LBCA1KU1WA Model Name: LBCA1KU1WA m m 7

. 0 m m 3

. 0 m m 9 2

. 3 m m 5

. 0 5

. 9 m m 0.9mm 3.29mm 5.1mm Since the product is too small to put the FCC and IC IDs even with the font size 4 point, we have to put the related information on the user manual and packaging. 1WA Murata's model name for management Note) The model name to apply is "LBCA1LU1WA Direction display 2D code LBCA1KU1WA - Package Label Design FCC ID:VPYLBCA1KU1WA IC: 772C-LBCA1KU1WA HVIN:LBCA1KU1WA This device complies with part 15 of FCC Rules and Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme la partie 15 des rgles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The character size is 4 points or more. Notation requirement areas of other countries.

muRata INNOVATOR IN ELECTRONICS Special Power of Attorney To whom it may concern:

I, MOTOO HAYASHI of Murata Manufacturing Co., Ltd. hereby appoint Takahiro Watanabe of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from September 22, 2019 unless specifically extended or terminated by either party. Date: September 22, 2019 Place: Japan Kbsto Ab MOTOO HAYASHI Murata Manufacturing Co., Ltd.

muRata INNOVATOR IN ELECTRONICS Date: 12/12/2019 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Murata Manufacturing Co., Ltd. FCC ID: VPYLBCA1KU1WA FCC Part 15C Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Murata Manufacturing Co., Ltd. requesis that the following documents regarding this submission for FCC ID: VPYLBCA1KU1WA be kept confidential:

Exhibit Type Block Diagram Schematics Operational Description Part list Those docijimente contain detailed eveteam and equinment desccrintion and related information about the product which. Murata Manufacturing Co., Ltd. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Murata Manufacturing Co., Ltd. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, sy Poe - fy NW ytyoate Name : Takahiro Watanabe Title: Senior Manager

INNOVATOR IN ELECTRONICS Label Location Justification Letter This justification is applicable to the Communication Module identified as:

Model: LBCA1KU1WA FCC ID: VPYLBCA1KU1LWA IC: 772C-LBCA1KULWA olnce the proaguct IS t00 SMa to put tine FUL and lu Is even with the font size & point, we have to put the related information on the user manual and packaging. af WeDo oh Name: Takahiro Watanabe Title: Senior Manager Company: Murata Manufacturing Co., Ltd.

Applicant/Grantee _| Murata Manufacturing Co., Ltd. VPYLBCAIKUIWA Section 15.212 Modular Transmitters

/ NL) Ace a ae es: 40 oki A rl aa lowe Alea ek eset ay, Th TD Ara ane ~An th eaaen tn RA lla ast Atenas eee M RROD BNR AV RNR nee SAV PIV Ve PR Ee BNR Bee eR freee LAMPE VO Single Modular Approval Requirements The radio elements must have the radio The module has its own RF shielding. frequency circuitry shielded. Physical Shield Can is employed on the board components and tuning capacitor(s) may | structure, please see exhibition External e located external to the shield, but must | Photo, the emission measurement was e on the module assembly; conducted without further shielding added.

(The module must have buffered All modulation and data input(s) are modulation/data inputs to ensure that the | buffered. The EUT has buffered data device will comply with Part 15 inputs, it is integrated on chip. 2 requirements with any type of input signal; Y The module must contain power supply ave its own power supply regulation. Q foe dg Vv

= VSladuyil UI LIS TUUUIL,. The module must contain a permanently | The EUT meets the FCC antenna attached antenna, or contain a unique Requirements. antenna connector, and be marketed and Instructions in Installation Manual. operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);

The module transmitter has been The module must demonstrate compliance | performed the testing in s state of being in a stand-alone configuration; installed on a test jig board simulating the board of the installed end product. It has been performed the testing as a stand-

alone and then confirmed the compliance. The module and antenna will be mounted on a board similar to the one shown in the test set photo, and the board will be Installed in the end product. The module must be labeled with its There is no space to describe the FCC permanently affixed FCC ID label, or use ID .Please refer Label Location described on the manual and package. Instructions in User Manual The module must comply with all specific ules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee;

Please refer the Maximum Permissible The module must comply with RF Exposure Information. exposure requirements. A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for eauipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. J Wot wroly Signature Name/Title: Takahiro Watanabe/Senior Manager Company Name: Murata Manufacturing Co.,Ltd. Date: 12/12/2019