User Manual This device is the bluetooth low energy module. Model Name: 2DV FCC ID: VPYLBCA1ZZ2DV This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with below part 15 of the FCC Rules. Part 15 Subpart C Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 1 User Manual Antenna list. Part number Internal Trace Antenna Vendor Murata Peak Gain(dBi) Type Connector
+1.0
/4 Monopole
The following information must be indicated on the host device of this module. Contains Transmitter Module FCC ID VPYLBCA1ZZ2DV or Contains FCC ID VPYLBCA1ZZ2DV FCC Compliance Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device. The following statements must be described on the user manual of the host device of this module;
FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy. But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 2 Installation Manual Dimensions, Marking A 5.6 mm C marking A B C D Mark L T B 1.3mm 0.8mm 0.8mm D m m 7
. 2 2.7mm 9.4 mm Meaning Murata Logo Module Type Pin 1 Marking 2D Code dimensions Mark dimensions Mark dimensions 5.60.25 W 9.40.25 T 2.2max Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 3 Installation Manual Terminal Configurations (Top vew) No A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8 A-9 A-10 B-1 B-2 B-9 B-10 C-1 C-2 Terminal Name GND No C-9 LED_6_P0_28 C-10 LED_4_P0_19 LED_2_P0_21 LED_1_P0_24 D-1 D-2 D-9 LED_5_P0_29 D-10 LED_3_P0_20 LED_0_P0_13 GND GND USBP_P0_14 LED_7_P0_27 GND VBAT USBM_P0_15 P1_21 E-1 E-2 E-9 E-10 F-1 F-2 F-9 F-10 G-1 G-2 Terminal Name P1_15 GND P1_13_GPADC_4 P1_20 P1_14 LX P1_19_GPADC_7 P1_22 P1_16 LY P1_09_GPADC_7 P1_10 P0_30 P1_17 P1_18_GPADC_6 P1_07 No G-9 G-10 H-1 H-2 H-9 H-10 J-1 J-2 J-9 J-10 K-1 K-2 K-9 K-10 L-1 L-2 Terminal Name P1_04 P1_11 P1_12_GPADC_5 P1_02 P1_04 P0_02 GND P1_06 P0_01 P0_00 P0_08_UART_BOOT_RX P1_00 P1_03 P1_05 P0_25_GPADC_1 P1_01 No L-9 L-10 M-1 M-2 M-9 Terminal Name P0_31 P0_11_M33_SWCLK P0_09_UART_BOOT_TX P0_26 P0_12_CMAC_SWDIO M-10 P0_10_M33_SWDIO N-1 N-2 N-9 N-10 P-1 P-2 P-9 P-10 Q-1 Q-2 P0_16 P0_07 GND GND P0_06 P0_17 GND ANT_IN n P0_18 No Q-9 Q-10 R-1 R-2 R-3 R-4 R-5 R-6 R-7 R-8 R-9 R-10 Terminal Name GND ANT_OUT GND GND GND GND GND GND GND GND GND GND Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 4 Installation Manual Land Pattern TOP View (Recommended) Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 5 Installation Manual Operating condition
*The output level can be varied by changing the value of the power index within the scope of the application.
(power setting: -18, -12, -8, -6, -3, -2, -1, 0, 1.5, 2, 3, 4, 4.5, 5dBm) Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 6 Installation Manual Recommended pattern for antenna part Recommended pattern (green) between these terminals as follow. 0.25mm 0.25mm IC301:
Flash memory ANT_IN ANT_OUT 0.25mm 0.5mm 1.2mm 0.2mm 0.3mm ANT_IN ANT_OUT 0.2mm 0.2mm 0.3mm 0.3mm The distance (thickness) between the green pattern and the lower ground is 200 microns.
*Consideration should be given to change applications for traces other than the design specified in the manual. 0.2mm Copyright Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2023 7