FCC ID: VPYLBEE59B1LV Communication Module

User Manual Murata Manufacturing Co.,Ltd. 1 murata.com Copyright Murata Manufacturing Co., Ltd. All rights reserved. 1 Copyright Murata Manufacturing Co., Ltd. All rights reserved. 04 March 2019 04 March 2019 Type1LV User Manual for FCC Regarding FCC modular approval of Type1LV Model Name: Type1LV FCC ID:VPYLBEE59B1LV This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 04 March 2019 2 Type1LV User Manual for FCC Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification

(installation procedure). The following information must be indicated on the host device of this module. Contains Transmitter Module FCC ID:VPYLBEE59B1LV or Contains FCC ID: VPYLBEE59B1LV This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it can not be described on the host product, it must be listed on both the host product manual and on the host product package or removable label. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 04 March 2019 3 Type1LV User Manual for FCC The following statements must be described on the user manual of the host device of this module;

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20 ppm This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 04 March 2019 4 Type1LV User Manual for FCC When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. When installing it in a portable equipment. Please describe the following warning to the manual. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. LBEE5HY1MW has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. It is necessary to take a SAR test with your set mounting this module . Class II permissive change application is necessary using the SAR report. Please contact Murata. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Antenna Please refer to the Antenna Specification document supplied by Murata or please contact Murata for the detail designation of how to design the Antenna trace. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 04 March 2019 5

Authority to Act as Agent Date: Mar.25.2024 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint Mr. Weidong Wang of TV Rheinland Shanghai Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Murata Manufacturing Co., Ltd. / 10-1, Higashikotari 1-chome, Nagaokakyo-shi, Kyoto, 617-8555 Japan. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:

Mar.25.2024 Agreement is valid for 12 months from the above date. By:

(Signature) _________ _ Kenji Hayashikoshi __

(Print name) _senior manager_____________

(Title) _ +81-50-1737-2801 ____

(Telephone) On behalf of:

Murata Manufacturing Co., Ltd.

(Company Name) Page 1 of 1

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 27, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: VPYLBEE59B1LV

[Murata Manufacturing Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, [Murata Electronics North America, Inc.] is our designated U.S. agent for service of process.[Murata Manufacturing Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

[Murata Electronics North America, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process. Sincerely, Designated U.S. Agent Information:

Name: Murata Electronics North America, Inc. FRN: 0024753089 Contact Person: Mark E Tucker Address: 2200 Lake Park Drive Smyma, GA 30080-7604 United States Tel.: (678)684-2009 Email: mtucker@murata.com Mark E. Tucker U.S. Agent Signature:

Applicant:

Company Name: Murata Manufacturing Co., Ltd. FRN: 0017033432 Contact Person: Kenji Hayashikoshi Address: 1-10-1, Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Tel.: +81-50-1737-2801 Email: koshi@murata.com Applicant Signature:

Data: Mar.25.2024 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Roads, Columbia, MD 21046 Dear Examiner, This is to request a Class II permissive change for FCC ID: VPYLBEE59B1LV (original grant date: Apr.16.2019). Applicant: Murata Manufacturing Co., Ltd. The product hardware will not be changed.The Bluetooth conducted power of the product will not be changed. Only the Wi-Fi conducted power of the product will be reduced. this change is performed by software and do not require any hardware changes. Therefore, it will not affect DFS performance. Software change is changed by the grantee and cannot be changed by third parties. Sincerely, _____

/senior manager___ Kenji Hayashikoshi

(Signature/Title)

(Print name) By:

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: Mar.25.2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: VPYLBEE59B1LV Murata Manufacturing Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely yours, Applicant Signature Printed Name: Kenji Hayashikoshi Title: senior manager Address: 1-10-1, Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Tel.: +81-50-1737-2801 Email: koshi@murata.com

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: Mar.25.2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: VPYLBEE59B1LV Murata Manufacturing Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Kenji Hayashikoshi Title: senior manager Address: 1-10-1, Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Tel.: +81-50-1737-2801 Email: koshi@murata.com

Data: Mar.25.2024 To:

Innovation, Science and Economic Development Canada Certification and Engineering Bureau P.O. Box 11490, Station H 3701 Carling Avenue (Building 94) Ottawa, Ontario K2H 8S2 Dear Examiner, These are to request the Class III permissive change for IC: 772C-LBEE59B1LV

(original grant date: J uly.09.2019). Applicant: Murata Manufacturing Co., Ltd. The product hardware will not be changed.The Bluetooth conducted power of the product will not be changed. Only the Wi-Fi conducted power of the product will be reduced. this change is performed by software and do not require any hardware changes. Therefore, it will not affect DFS performance. Software change is changed by the grantee and cannot be changed by third parties. _/ senior manager_ Kenji Hayashikoshi

(Signature/Title)

(Print name) Sincerely, _ By: