|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-06-11
|
|
1 2 3
|
Applicant's complete, legal business name |
Murata Manufacturing Co., Ltd.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0017033432
|
|
1 2 3
|
Physical Address |
10-1, Higashikotari 1-chome Nagaokakyo-shi
|
|
1 2 3
|
10-1, Higashikotari 1-chome
|
|
1 2 3
|
Kyoto, N/A
|
|
1 2 3
|
Japan
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
t******@timcoengr.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
VPY
|
|
1 2 3
|
Equipment Product Code |
LBEE6XX1UR2
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
K**** H********
|
|
1 2 3
|
Title |
SENIOR MANAGER
|
|
1 2 3
|
Telephone Number |
81-75********
|
|
1 2 3
|
Fax Number |
81-75********
|
|
1 2 3
|
E-mail |
k******@murata.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/08/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Communication module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Original Equipment |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes.
This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| 1 2 3 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.
This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| 1 2 3 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes.
This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Compliance Certification Services Inc. Wugu Lab.
|
|
1 2 3
|
Name |
H******** L********
|
|
1 2 3
|
Telephone Number |
886-2******** Extension:
|
|
1 2 3
|
Fax Number |
+886-********
|
|
1 2 3
|
E-mail |
h******@sgs.com
|
|