FCC ID: VPYLBWA0ZZ2DS Communication Module

LBWA0ZZ2DS User Manual for FCC Model Name: LBWA0ZZ2DS FCC ID:VPYLBWA0ZZ2DS Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure) The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the end users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in User manual. This modular is a limited single modular as without its own power supply regulation, it can only be installed in the host device according to the interface specification (installation procedure). The following information must be indicated on the host device of this module. Contains Transmitter Module FCC ID:VPYLBWA0ZZ2DS or Contains FCC ID: VPYLBWA0ZZ2DS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 21 January 2021 1 LBWA0ZZ2DS User Manual for FCC The following statements must be described on the user manual of the host device of this module;

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When installing it in a mobile equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. When installing it in a portable equipment. It is necessary to take a SAR test with your set mounting this module. Class II permissive change application is necessary using the SAR report. Please contact Murata. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 21 January 2021 2

LBWA0ZZ2DS Label 12.65 2.8 x 2.8 0.60 0.60 0.60 0.80 1.00 0.60 0.60 LBA0ZZ2DS SS0Y06001 XXXXXXXXX R 001-P01579 0.60 FCC IDVPYLBWA0ZZ2DS IC772C-LBWA0ZZ2DS 1 2

. 6 5 0.6 muRata logo 2d Matrix code LBEE5XV1XA Model No SSXXXXXXX Inspection 999999999 No Serial No Direction Mark Copyright Murata Manufacturing Co., Ltd. All rights reserved. 21 December 2020 1 LBWA0ZZ2DS Label LBA0ZZ2DS SS0Y06001 XXXXXXXXX R 001-P01579 FCC IDVPYLBWA0ZZ2DS IC772C-LBWA0ZZ2DS The photo on the left is a test sample and differ from the actual printed content. The figure on the right shows the actual print contents. Print on the top of the metal case of the module as shown in the photo on the left. Copyright Murata Manufacturing Co., Ltd. All rights reserved. 21 December 2020 2

FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name: Murata Manufacturing Co., Ltd. Address:

City:

Country:

10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555, Japan Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: VPYLBWA0ZZ2DS Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC: (notes 2, 3, 4, 5) Date: 02/03/2021 Name and signature of applicant: KENJI HAYASHIKOSHI Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160, Issue 04 Declaration of Authorization We Name:

Address:

City:

Country:

Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555 Japan Name Representative of agent: Jim Chang Agent Company name:

SGS Taiwan Ltd. Declare that:

Address:

City:

Country:

134, Wu Kung Road, Wu ku Industrial Zone TW- New Taipei City 24803 New Taipei City Taiwan is authorized to apply for Certification of the following product(s):

Product description: Communication Module Type designation:

LBWA0ZZ2DS Trademark:

muRata Validity/ expiry date: 03/31/2021 on our behalf, Date:

City: Kyoto Signature:

Name: KENJI HAYASHIKOSHI Function: Senior Manager

muRata INNOVATOR IN ELECTRONICS Special Power of Attorney To whom it may concern:

I, MOTOO HAYASHI of Murata Manufacturing Co., Ltd. hereby appoint Kenji Hayashikoshi of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from April 15, 2020 unless specifically extended or terminated by either party. Date: April 15, 2020 Place: Japan MOTOO HAYASHI Murata Manufacturing/Co., Ltd.

RF_734_02 04 April 16 Answer from applicant Yes Yes No The voltage for RF portion inside IC is supplied from outside directly. Yes The modular transmitter has been performed the testing in a state of being installed on a test jig board simulating the board of the installed end product. It has been performed the testing as a stand-alone and then confirmed the compliance. The module will be mounted on a board similar to the one shown in the test set photo, and the board will be installed in the end product. Yes Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: VPYLBWA0ZZ2DS Items to be covered by Single modular transmitters. 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). 8. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes Yes RF_734_02 04 April 16 Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): KENJI HAYASHIKOSHI Date: 02/03/2021 Signature: ___________________________

LETTER HEAD WIFI Channel 12 & 13 Declaration Letter Date: 01/21/2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: VPYLBWA0ZZ2DS To who it may concern, we have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability. Please check Product hardware does not have the capability to operate on channel 12

& 13. Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Compliance is demonstrated in test report as the maximum transmit power is properly adjusted to comply with the out-of-

band emission requirements in Part 15.247. The device is a WiFi client device that is not able to operate at different power levels as the default setting, which is not accessible to third-party. Others Pls explain detail here. Signature:

Name (Printed): KENJI HAYASHIKOSHI Title: Senior Manager On behalf of Company: Murata Manufacturing Co., Ltd. Telephone: +81-75-955-6736 Address: 10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555, Japan