FCC ID: VPYLB2AG Gateway

[Gateway]

User Manual for NF Model name: LBAE0ZZ2AG CONFIDENTIAL 1 / 24 Revision History Date Revision Change point 1.0 Original CONFIDENTIAL 2 / 24 Table of contents 1 Description ........................................................................................................................................ 4 2 Product specification ........................................................................................................................ 5 2.1 Hardware specification .............................................................................................................. 5 2.2 Body shape and dimensions ...................................................................................................... 6 2.3 Block diagram ............................................................................................................................ 8 2.4 Operation Mode ....................................................................................................................... 10 2.5 Label .......................................................................................................................................... 11 2.6 Package .................................................................................................................................... 12 2.7 Safety-related security ............................................................................................................ 13 3 Appendix ......................................................................................................................................... 14 3.1 Antenna Specification ............................................................................................................. 14 3.2 Antenna Setup ......................................................................................................................... 16 3.3 Antenna directivity .................................................................................................................. 16 3.4 Tx timing chart for IEEE802.15.4.. ....................................................................................... 16 4 Information of importer, manufacturer and factory ...................................................................... 17 5 Applicable standards and certification .......................................................................................... 18 6 NOTICE .......................................................................................................................................... 20 6.1 Storage and operation conditions ........................................................................................... 20 6.2 Caution for use ........................................................................................................................ 20 6.3 Limitation of applications ....................................................................................................... 21 7 Note on safety ................................................................................................................................. 22 8 Warranty for product ...................................................................................................................... 23 8.1 Warranty period and its scope ................................................................................................ 23 8.2 Warranty exception ................................................................................................................. 24 CONFIDENTIAL 3 / 24 1 Description

LBAE0ZZ2AG is the multiple RF protocol gateway for wireless sensor network. This product can receive the sensor data from wireless sensor tag (LBAE0ZZ2AM) through IEEE802.15.4 and can measure own sensor data and upload the data to the cloud through 4G.

IEEE802.15.4 frequency band is 2405MHz~2480MHz.

- Waterproof performance equivalent to IP54.

- Operates on internal lithium ion battery or external lithium ion battery.

It is mainly used in the transportation of pharmaceutical products and medical equipment and is not intended to be used in environments that require high reliability such as automobiles, and power plants.

- No accessories. CONFIDENTIAL 4 / 24 2 Product specification 2.1 Hardware specification Model Name Wireless communication IEEE802.15.4 Interface Frequency LBAE0ZZ2AG IEEE802.15.4 2405MHz - 2480MHz+/-9ppm

(+/-30ppm@-30~+85) Channel BW Modulation 5MHz OQPSK Antenna Monopole pattern antenna (less than +1.2dBi) RF output power Less than 9dBm (e.i.r.p.) Duty cycle Less than 0.5%. 4G module LE910C1-NF

(LTE FDD Cat.1. 3GPP release 9 compliant) bands B2, B4, B5, B12, B13, B14, B66, B71 RF output power Class 3 (0.2 W, 23 dBm) @ LTE GNSS GPS / GLONASS Use GNSS module (MAX-M8C) Power supply Battery Lithium ion battery*1pc Rx only

(min 3.0V / typ. 3.85V / max 4.36V) External CHEERO CHE-104 (Connect with USB cable) Hardware Human interface Push switch*3pcs Reset switch*1pc OLED*1pc 3 color 1pcBlue & 3ColorLED(Red & Green &

Blue)*1 Buzzer*1pc SIM Slot (Micro SIM Card)*1 Operating environment IP grade Accessory

IP54 Temperature

-10degC ~ +60degC Humidity Material 0%RH ~ 90%RH (non-condensing) Polycarbonate Case Flame retardancy UL94 V-2 Minimum Thickness 0.6mm CONFIDENTIAL 5 / 24 2.2 Body shape and dimensions External Label CONFIDENTIAL 6 / 24 Internal IC901 Main module IC1001 4G module IC604 IC701 GNSS module GNSS antenna 4G antenna IEEE802.15.4 module IEEE802.15.4 antenna CONFIDENTIAL 7 / 24 2.3 Block diagram Block Diagram of product MicroUSB

(ForCommunication) Switch IC MicroUSB

(For Charging) Battery Management 3.8V Battery

(Lithium ion)

(Typical Voltage 3.8V) Battery Check UART SincetheWLAN,BT, 2G and 3Gfunctionsof theHE922aredisabled,theyareoutsidethe scopeofthisapplication. IC901 TelitMainmodule

(HE922) DCDC 3.0V Yellowline :3.8Vdc Redline:3.0Vdc Reset Botton Power/OK Botton Forward Botton Back Botton LDO 1.8V LDO 1.8V IC604 Telink Zigbee module

(TLSR8269F512ET48) Zigbee ANT Pattern Antenna EEPROM

(64kbit) 4GANT Pattern Antenna IC1001 Telit4Gmodule

(LE910C1NA) Module approved FCCID:RI7LE910CXNF IC:5131ALE910CXNF UART GNSS ANT ExternalAntenna MicroSim DCDC converter(12V) OLED Buzzer LED 3color IC71 GNSS IC Crypto Authentication Device X602 X601 Temperature

&Humidity Pressure 3Axis Accelerometer Illuminance Block Diagram of RF device(IEEE802.15.4) CONFIDENTIAL 8 / 24 Block Diagram of RF device(4G) CONFIDENTIAL 9 / 24 Block Diagram of RF device(GNSS) 2.4 Operation Mode Mode Sleep Measuring 802.15.4 Tx 802.15.4 Rx GNSS Rx 4G Tx 4G Rx Sensor IEEE802.15.4 GNSS OFF ON OFF OFF OFF ON ON OFF OFF Tx Rx OFF OFF OFF OFF Rx OFF OFF Rx OFF OFF 4G OFF OFF OFF OFF OFF Tx Rx 802.15 and 4G never transmit at the same time CONFIDENTIAL 10 / 24 2.5 Label Top Label Bottom Label CONFIDENTIAL 11 / 24 2.6 Package The product is wrapped with an ESD compatible sheet. 5pcs/box CONFIDENTIAL 12 / 24 2.7 Safety-related security Requirement Specification/conditions Compliance verified by a) Protection against casual or The transmitted data is coincidental violation;

encrypted and exchanged. b) Protection against intentional Uses proprietary violation using simple means communication protocols. with low resources, generic skills and low motivation;

c) Protection against intentional N/A violation using sophisticated means with moderate resources, specific skills related to the considered equipment and moderate motivation;

d) Protection against intentional N/A violation using sophisticated means with extended resources, specific skills related to the considered equipment and high motivation. CONFIDENTIAL 13 / 24 3 Appendix 3.1 Antenna Specification Model name IEEE802.15.4 antenna Frequency 2405MHz2480MHz Antenna Type Monopole pattern antenna Connector type

Peak gain

+1.2dBi Photo CONFIDENTIAL 14 / 24 Model name GNSS antenna Frequency 1559MHz1610MHz Antenna Type Active patch antenna module Connector type U.FL Peak gain 3.0dBi (Rx only) Photo Model name 4G antenna Frequency 617MHz2170MHz Antenna Type Monopole pattern antenna Connector type

Peak gain 1.6dBi Photo CONFIDENTIAL 15 / 24 3.2 Antenna Setup The antennas of this product are built-in pattern antennas for IEEE802.15.4 and 4G, and an antenna module for GNSS. 3.3 Antenna directivity pattern antennas for IEEE802.15.4 and 4G Omnidirectional antenna GNSS The null point of the antenna is the direction of the bottom side. The main lobe is in the top side. 3.4 Tx timing chart for IEEE802.15.4..

*The Conducted power test was modified to allow measurements under 100% continuous radiation conditions as a conservative condition. The maximum duty ratio in actual use is less than 8.361msec/1.79sec = 0.5%. CONFIDENTIAL 16 / 24 4 Information of importer, manufacturer and factory

Information of the importer Company name:

Address:

Information of the manufacturer Company name: Murata manufacturing Co., Ltd. Address:

1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan

Information of the factory Company name: Komatsu Murata manufacturing Co., Ltd. Address:

Hikari-machi, Komatsu-shi, Ishikawa 923-8626 Japan CONFIDENTIAL 17 / 24 5 Applicable standards and certification This product complies with the radio regulations described in the specification. Be sure to comply with following points upon usage.

- When using this product, use an application that is compatible with the country / region of use.

- DO NOT use applications from different regions.

- DO NOT disassemble or modify the product.

- DO NOT peel off the product label. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. manufacturing contact information Company name: Murata Electronics North America, Inc. Address:

2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. Phone:

+1 770 436 1300 FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operated in conjunction with any other antenna or CONFIDENTIAL 18 / 24 transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. IC CAUTION This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lISDE. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. CONFIDENTIAL 19 / 24 6 NOTICE 6.1 Storage and operation conditions The product shall not be stored in an atmosphere with high temperature and high humidity. Any excess mechanical shock shall not be applied to the product. Do not store or use in the following circumstances.

In an atmosphere containing corrosive gas (Cl2, NH3, SOx, NOx etc.) In an atmosphere containing combustible and volatile gases In an atmosphere containing organic solvents In an atmosphere with strong electromagnetic field and static electricity In an atmosphere containing hot air or close to fire

- Humid place where water condenses

Freezing place

- Dusty environment This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. 6.2 Caution for use Do not disassemble, modify or repair this product. If water or a foreign object gets inside the case, unplug the DC power supply or battery and stop using it. If there is smoke, a strange smell or noise, unplug the DC power supply or battery and stop using it. If the product is dropped or gets a strong physical impact, power it off and stop using it. Do not touch the product during and after being used in a low or high temperature environment. Corrosive gas may generate harmful substances. Do not use the product in an atmosphere containing corrosive gas. CONFIDENTIAL 20 / 24 6.3 Limitation of applications This product is designed to work under the environmental conditions described in the specification. Do not use the product in the following applications that require extremely high reliability to prevent defects which might directly cause damage to third partys life, body or property.

- Aircraft equipment

- Aerospace equipment

- Undersea equipment

Power plant control equipment

- Medical equipment

Transportation equipment (vehicles, trains, ships, etc.). Traffic single equipment

- Disaster prevention /crime prevention equipment.

- Applications that require similar complexity and/or reliability to the applications listed above CONFIDENTIAL 21 / 24 7 Note on safety Do not cover the product with flammable materials. If smoke or strange smell out of the product, turn off the product and stop use. Do not disassemble, modify or repair this product. Stop use if the product is dropped. Do not place the product in an atmosphere containing flammable gases Do not exposed to excessive heat such as sunshine, fire or the like, that can result in an explosion or the leakage of flammable liquid or gas during use, storage or transportation or disposal. Do not dispose of a battery into fire or a hot oven, or give mechanically crushing or cutting of a battery, that can result in an explosion. Do not subjected to extremely low air pressure at high altitude that may result in an explosion or the leakage of flammable liquid or gas. Risk of explosion if the battery is replaced by an incorrect type. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. CONFIDENTIAL 22 / 24 8 Warranty for product 8.1 Warranty period and its scope Please note that the only warranty that we provide regarding Product is its conformance to the Product Specification provided herein for 12 months from the delivery date (Warranty Period). During the Warranty Period, in the event of defective Product, even if Product is used for the purpose, under the condition and in the environment specified in this Product Specification, we will at our option (a) promptly replace with the Product without defective or (b) accept the return of the defective Product. The above shall constitute our entire liability with respect to defective of our Product. EXCEPT AS PROVIDED IN THE ABOVE, WE HEREBY DISCLAIM ALL OTHER WARRANTIES REGARDING THE PRODUCT AND ITS RELATED SOFTWRE, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MARCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. CONFIDENTIAL 23 / 24 8.2 Warranty exception You understand and agree that we have no liability for any defect or trouble of Products which caused by your mistake or fault in handling. Please note that you shall use the Product according to guide line for the safety described in this Product Specification and/or user manual which is provided to you separately (Guide Line). We are not liable for safety of the Product when it is used other than any way described in the Guide Line. We have no liability to the Product even in the Warranty Period, if it falls under one of the following items.

- Defective Product and/or damage caused by use of the Product other than any way described in the Guide Line.

- Defective Product and/or damage caused by repair, modification by you or any third party other than us without our prior consent.

- Defective Product and/or damage caused by accidental fall and careless handling after delivery.

- Defective Product and/or damage caused by natural disaster such as fire disaster, earthquake, pollution, wind, flood, lightning strike, and salt pollution, and physical or electric load over the normal condition.

- Defective Product caused by degradation and expendable part.

- Defective Product caused by product or device other than the Product. You agree and understand that we are not liable to you or to any of your customers for any damages of system, life, body injury, and property of third party caused by defective Product, and for any damages caused by measurement data of our Product. WE SHALL NOT BE LIABLE TO YOU OR TO ANY OF YOUR CUSTOMERS FOR ANY LOSS OF PROFIT, INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATING TO THE USE OF THE PRODUCT OR FOR ANY ERROR OR DEFECT IN THE PRODUCT. OUR ENTIRE LIABILITY AND OUR SOLE AND EXLUSIVE REMEDY FROM ANY CAUSE OF THE PRODUCT INCLUDING, WITHOUT LIMITAION, NONPERFORMANCE OR MIS-

REPRESENTAION AND REGARDRLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT, OR ANY OTHER LEGAL THOROY, IS LIMITED TO THE PRICE OF APPLICABLE PRODUCT. CONFIDENTIAL 24 / 24

enanr UUID:

AAAAAAAABBBBBBBBCCCCCCCCDDDDDDDD-

Serial:

Gisel MGPB12A000001 ae

Gateway Model : LBAEOZZ2AG Type : 757 FCC ID : VPYLB2AG IC : 772C-LB2AG Contains FCC ID : RI7LE910CXNF Contains IC : 5131A-LE910CXNF Made in Japan

Letter of Authorization Document No.: I1-2021-101 Date:

UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Murata Manufacturing Co., Ltd. FCC ID: VPYLB2AG To whom it may concern:

We, the undersigned, hereby authorize Shuichi Ohyama of UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Takeshi Sato Murata Manufacturing Co., Ltd.

Request for Confidentiality Document No.: I1-2021-102 Date:

UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Murata Manufacturing Co., Ltd. FCC ID : VPYLB2AG To whom it may concern:

Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459:

Theory of Operation Schematics The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Takeshi Sato Murata Manufacturing Co., Ltd.

Document No.: I1-2021-108 Special Power of Attorney To whom it may concern:

I, Motoo Hayashi of Murata Manufacturing Co., Ltd. hereby appoint Takeshi Sato of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products Letter of agency and anti-drug Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective from October 6, 2021 unless specifically extended or terminated by either party. Date: October 6, 2021 Place: Japan Motoo Hayashi Murata Manufacturing Co., Ltd.