FCC ID: VPYLB1WL Geolocation Module

Geolocation Module User Manual Part Number: LBEU5ZZ1WL LBEU5ZZ1WL has been FCC/ISED certified as Single Modular Approval with the following IDs. FCC ID: VPYLB1WL IC: 772C-LB1WL The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. Therefore, the final host product must be submitted to Murata for confirmation that the installation for the module into the host is in compliance with regulations of FCC and IC Canada. Specially, if an antenna other than the model documented in the Filing is used, a Class 2 Permissive Change must be filed with the FCC. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. This module has been approved by FCC to operate with the antenna types with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. The following antennas have been certified in combination with the module. Refer to the next pages for the antenna application guidance.

(a) Whip antenna ANT-SS900 for LoRa with a peak gain of 0.0dBi;

(b) Whip antenna W1010 for 2.4GHz WLAN and Bluetooth LE with a peak gain of 1.7dBi;

(c) Passive antenna for GNSS with a peak gain of 0.4dBi;

Antenna Application Guidance Bluetooth/WLAN GNSS LoRa Unit: mm Antenna Application Guidance Antenna feeding traces on PCB Ant trace LoRa BLE/WiFi GNSS Length (mm) Width (mm) 56.29 21.18 26.92 0.27 0.27 0.27 FCC Statements Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. When the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording Contains transmitter module FCC ID: VPYLB1WL or Contains FCC ID:

VPYLB1WL. FCC Statements (cont.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help IC Statements This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. IC Statements (cont.) This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matriel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 nonce dans un autre environnement.cette eqipment devrait tre install et exploit avec distance minimale de 20 entre le radiateur et votre corps. When the Industry Canada certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can be use wording Contains transmitter module IC: 772C-

LB1WL or Contains IC: 772C-LB1WL.

LBEU5ZZ1WL Label Marking & Position 17.0mm 17.5mm The labeling information is laser marked on the surface of shielding case of the module.

INNOVATOR IN ELECTRONICS To whom it may concern:

Special Power of Attorney I, MOTOO HAYASHI of Murata Manufacturing Co., Ltd. hereby appoint Kenji Hayashikoshi of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from May 11, 2022 unless specifically extended or terminated by either party. Date: May 11, 2022 Place: Japan MOTOO HAYAS Murata Manufacturing/Co., Ltd. Cateecfeg act!

Covered Equipment Certification Attestation Letter DATE 2/7/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: VPYLB1WL Murata Manufacturing Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Murata Manufacturing Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Kenji Hayashikoshi Title: Dev. Sec. 6 Senior Manager, Connectivity Module Dev. Dept., Communication Module Div. Company Name: Murata Manufacturing Co., Ltd. Date: 2/7/2023

U.S. Agent Designation for Service of Process -

Certification Attestation Letter DATE 2/7/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer Per section 2.911(d)(7) of the FCC rules, Murata Manufacturing Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process:

Company Name: Murata Electronics North America, Inc. Physical U.S. Company Address: 2200 Lake Park Drive, Smyrna, GA 30080-7604 Agent name: Jue Chang Agent Email Address: jue.chang@murata.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Designated Agent Signed:

(Required, if different to Applicant):

Signed:

Printed name: Kenji Hayashikoshi Title: Dev. Sec. 6 Senior Manager, Connectivity Module Dev. Dept., Communication Module Div. Company Name: Murata Manufacturing Co., Ltd. Date: 2/7/2023 Signed:

Printed name: Jue Chang Title: Sr. Manager Company Name: Murata Electronics North America, Inc. Date: 2/7/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.