FCC ID: VPYLB1VG LPS Module

LPS (Local Positioning System) Module User Manual Part Number: LBES0ZZ1VG LBES0ZZ1VG has been FCC/ISED certified as Single Modular Approval with the following IDs. FCC ID: VPYLB1VG IC: 772C-LB1VG The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. Therefore, the final host product must be submitted to Murata for confirmation that the installation for the module into the host is in compliance with regulations of FCC and IC Canada. Specially, if an antenna other than the model documented in the Filing is used, a Class 2 Permissive Change must be filed with the FCC. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. This module has been approved by FCC to operate with the antenna types with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. The following antennas have been certified in combination with the module. Refer to next pages for the antenna application guidance.

(a) Dipole whip antenna ANT-DB1-RAF-RPS for WLAN with peak gains of 4.1dBi (2.4GHz) and 5.1dBi (5GHz);

(b) Monopole PCB antenna for 5GHz WLAN with peak gain of 4.5dBi;

(c) Monopole PCB antenna for Sub-GHz with a peak gain of 1.5dBi;

Antenna Application Guidance There is no RF components on the RF path. RF path of Dipole whip antenna ANT-DB1-RAF-RPS for WLAN Antenna Application Guidance RF path of Monopole PCB antenna for 5GHz WLAN and sub-G FCC Statements Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. When the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can be use wording Contains transmitter module FCC ID: VPYLB1VG or Contains FCC ID: VPYLB1VG. FCC Statements (cont.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help IC Statements the device. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuvpour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensitncessaire l'tablissement d'une communication satisfaisante. IC Statements (cont.) This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matriel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 nonce dans un autre environnement.cette eqipment devrait tre installet exploit avec distance minimale de 20 entre le radiateur et votre corps. When the Industry Canada certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can be use wording Contains transmitter module IC: 772C-

LB1VG or Contains IC: 772C-LB1VG.

iM

$S624T013 z Model : LBESOZZ1VG FCC ID: VPYLB1VG IC:772C-LB1VG 1 (R001-P01560 Ps SF Indoor Use Only

LBES0ZZ1VG Label Marking & Position 30mm 28.5mm The labeling information is laser marked on the surface of shielding case of the module. 28.5mm 30mm

INNOVATOR IN ELECTRONICS Special Power of Attorney To whom it may concern:

I, MOTOO HAYASHI of Murata Manufacturing Co., Ltd. hereby appoint Kenji Hayashikoshi of Murata Manufacturing Co., Ltd. to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective for one year from April 15, 2021 unless specifically extended or terminated by either party. a Date: al st [Marck /202/

Place: Japan MOTOO HAYASHI Murata Manufacturing Co., Ltd.

1/7/2022 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: VPYLB1VG Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below:

PERMANENT LONG-TERM CONFIDENTIALITY:

Schematics Bill of Materials/Parts List Block Diagrams Operational_Description SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 45 DAYS :

Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed:

Printed name: Kenji Hayashikoshi Title: Dev. Sec. 6 Senior Manager, Connectivity Module Dev. Dept., Communication Module Div.

Date (6/1/2022) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: VPYLB1VG The following attestation addresses the requirements to support modular approval:

Modular approval requirement Yes (provide brief statement) No *

Yes The module has a full-wrap metal shielding on the top. Yes There are data buffers implemented in the STM32 MCU. Yes There are onboard power regulators in the module. Yes The antennas attach to the module via unique connectors. Yes Yes Yes

(a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly

(b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal

(c) The module must contain power supply regulation on the module

(d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)

(e) The module must demonstrate compliance in a stand-alone configuration

(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements)

(g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Modular approval requirement Yes (provide brief statement)

(h) The module must comply with RF exposure requirements

* Please provide a detailed explanation if the answer is No. Sincerely, Yes No *

Signed:

Printed name: Kenji Hayashikoshi Title: Dev. Sec. 6 Senior Manager, Connectivity Module Dev. Dept., Communication Module Div.