all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
15 iP3000 UserMan r1 | Users Manual | 1.33 MiB | ||||
1 2 | ID Label/Location Info | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Operational Description | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report |
1 2 | 15 iP3000 UserMan r1 | Users Manual | 1.33 MiB |
iNSPIRE iP3000 2,000 Watt Powered Column Loudspeaker with a 2 x 12" Subwoofer, 18 Neodymium Drivers, KLARK TEKNIK Spatial Sound Technology, Digital Mixer, Remote Control via iPhone/iPad and Bluetooth Audio Streaming A54-XXXXX-XXXXX 20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point. 21. Use this apparatus in tropical and/or moderate climates. LEGAL DISCLAIMER MUSIC Group accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding MUSIC Groups Limited Warranty, please see complete details online at music-group.com/warranty. 2 iNSPIRE iP3000 Important Safety Instructions Terminals marked with this symbol carry electrical current of suffi cient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with
" TS or twist-locking plugs pre-installed. Allother installation or modifi cation should be performed only by qualifi edpersonnel. This symbol, wherever it appears, alertsyou to the presence of uninsulated dangerous voltage inside the enclosure-voltage that may be suffi cient to constitute a risk ofshock. This symbol, wherever it appears, alertsyou to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, donot remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualifi ed personnel. Caution To reduce the risk of fi re or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects fi lled with liquids, suchas vases, shall be placed on the apparatus. Caution These service instructions are for use by qualifi ed service personnel only. Toreduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualifi ed servicepersonnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. Ifthe provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories specifi ed by themanufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, orsold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has beendropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive
(2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effi cient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city offi ce, or your household waste collection service. 18. Do not install in a confi ned space, such as a book case or similar unit. 19. Do not place naked fl ame sources, such as lighted candles, on the apparatus. Quick Start Guide 3 18. No instale esta unidad en un espacio muy reducido, tal como encastrada en una librera o similar. 19. No coloque objetos con llama, como una vela encendida, sobre este aparato. 20. Tenga presentes todas las advertencias relativas al reciclaje y correcta eliminacin de las pilas. Las pilas deben ser siempre eliminadas en un punto limpio y nunca con el resto de la basura orgnica. 21. Use este aparato en rangos de temperatura moderados y/o tropicales. NEGACIN LEGAL MUSIC Group no admite ningn tipo de responsabilidad por cualquier dao o prdida que pudiera sufrir cualquier persona por confi ar total o parcialmente en la descripciones, fotografas o afi rmaciones contenidas en este documento. Las especifi caciones tcnicas, imgenes y otras informaciones contenidas en este documento estn sujetas a modifi caciones sin previo aviso. Todas las marcas comerciales que aparecen aqu son propiedad de sus respectivos dueos. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA y DDA son marcas comerciales o marcas registradas de MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017 Reservados todos los derechos. GARANTA LIMITADA Si quiere conocer los detalles y condiciones aplicables de la garanta as como informacin adicional sobre la Garanta limitada de MUSIC Group, consulte online toda la informacin en la web music-group.com/warranty. Instrucciones de seguridad Las terminales marcadas con este smbolo transportan corriente elctrica de magnitud sufi ciente como para constituir un riesgo de descarga elctrica. Utilice solo cables de altavoz profesionales y de alta calidad con conectores TS de 6,3 mm o de bayoneta prefi jados. Cualquier otra instalacin o modifi cacin debe ser realizada nicamente por un tcnico cualifi cado. Este smbolo, siempre que aparece, leadvierte de la presencia de voltaje peligroso sin aislar dentro de la caja;
estevoltaje puede ser sufi ciente para constituir un riesgo dedescarga. Este smbolo, siempre que aparece, leadvierte sobre instrucciones operativas y de mantenimiento que aparecen en la documentacin adjunta. Por favor, lea el manual. Atencin Para reducir el riesgo de descarga elctrica, no quite la tapa (o la parte posterior). No hay piezas en el interior del equipo que puedan ser reparadas por el usuario. Si es necesario, pngase en contacto con personal cualifi cado. Atencin Para reducir el riesgo de incendio o descarga elctrica, no exponga este aparato a la lluvia, humedad o alguna otra fuente que pueda salpicar o derramar algn lquido sobre el aparato. Nocoloque ningn tipo de recipiente para lquidos sobre el aparato. Atencin Las instrucciones de servicio deben llevarlas a cabo exclusivamente personal cualifi cado. Para evitar el riesgo de una descarga elctrica, no realice reparaciones que no se encuentren descritas en el manual de operaciones. Lasreparaciones deben ser realizadas exclusivamente por personalcualifi cado. 1. Lea las instrucciones. 2. Conserve estas instrucciones. 3. Preste atencin a todas las advertencias. 4. Siga todas las instrucciones. 5. No use este aparato cerca del agua. 6. Limpie este aparato con un pao seco. 7. No bloquee las aberturas de ventilacin. Instale el equipo de acuerdo con las instrucciones del fabricante. 8. No instale este equipo cerca de fuentes de calor tales como radiadores, acumuladores de calor, estufas u otros aparatos (incluyendo amplifi cadores) que puedan producir calor. 9. No elimine o deshabilite nunca la conexin a tierra del aparato o del cable de alimentacin de corriente. Unenchufe polarizado tiene dos polos, uno de los cuales tiene un contacto ms ancho que el otro. Una clavija con puesta a tierra dispone de tres contactos: dos polos y la puesta a tierra. El contacto ancho y el tercer contacto, respectivamente, son los que garantizan una mayor seguridad. Si el enchufe suministrado con el equipo no concuerda con la toma de corriente, consulte con un electricista para cambiar la toma de corriente obsoleta. 10. Coloque el cable de suministro de energa de manera que no pueda ser pisado y que est protegido de objetos afi lados. Asegrese de que el cable de suministro de energa est protegido, especialmente en la zona de la clavija y en el punto donde sale del aparato. 11. Use nicamente los dispositivos o accesorios especifi cados por el fabricante. 12. Use nicamente la carretilla, plataforma, trpode, soporte o mesa especifi cados por el fabricante o suministrados junto con el equipo. Altransportar el equipo, tenga cuidado para evitar daos y cadas al tropezar con algn obstculo. 13. Desenchufe el equipo durante tormentas o si no va a utilizarlo durante un periodo largo. 14. Confe las reparaciones nicamente a servicios tcnicos cualifi cados. La unidad requiere mantenimiento siempre que haya sufrido algn dao, si el cable de suministro de energa o el enchufe presentaran daos, sehubiera derramado un lquido o hubieran cado objetos dentro del equipo, si el aparato hubiera estado expuesto a la humedad o la lluvia, si ha dejado de funcionar de manera normal o si ha sufrido algn golpe o cada. 15. Al conectar la unidad a la toma de corriente elctrica asegrese de que la conexin disponga de una unin atierra. 16. Si el enchufe o conector de red sirve como nico medio de desconexin, ste debe ser accesiblefcilmente. 17. Cmo debe deshacerse de este aparato: Este smbolo indica que este aparato no debe ser tratado como basura orgnica, segn lo indicado en la Directiva WEEE (2012/19/EU) y a las normativas aplicables en su pas. En lugar de ello deber llevarlo al punto limpio ms cercano para el reciclaje de sus elementos elctricos/
electrnicos (EEE). Al hacer esto estar ayudando a prevenir las posibles consecuencias negativas para el medio ambiente y la salud que podran ser provocadas por una gestin inadecuada de este tipo de aparatos. Adems, el reciclaje de materiales ayudar a conservar los recursos naturales. Para ms informacin acerca del reciclaje de este aparato, pngase en contacto con el Ayuntamiento de su ciudad o con el punto limpio local. Quick Start Guide 5 18. Installieren Sie das Gert nicht in einer beengten Umgebung, zum Beispiel Bcherregal oder hnliches. 19. Stellen Sie keine Gegenstnde mit off enen Flammen, etwa brennende Kerzen, auf das Gert. 20. Beachten Sie bei der Entsorgung von Batterien den Umweltschutz-Aspekt. Batterien mssen bei einer Batterie-Sammelstelle entsorgt werden. 21. Verwenden Sie das Gert in tropischen und/oder gemigten Klimazonen. HAFTUNGSAUSSCHLUSS MUSIC Group bernimmt keine Haftung fr Verluste, die Personen entstanden sind, die sich ganz oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen knnen ohne vorherige Ankndigung gendert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA und DDA sind Warenzeichen oder eingetragene Warenzeichen der MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017 Alle Rechte vorbehalten. BESCHRNKTE GARANTIE Die geltenden Garantiebedingungen und zustzliche Informationen bezglich der von MUSIC Group gewhrten beschrnkten Garantie fi nden Sie online unter music-group.com/warranty. dquipements pour le recyclage, veuillez contacter votre mairie ou votre centre local de collecte des dchets. 18. Ninstallez pas lappareil dans un espace confi n tel quune bibliothque ou meuble similaire. 19. Ne placez jamais dobjets enfl amms, tels que des bougies allumes, sur lappareil. 20. Gardez lesprit limpact environnemental lorsque vous mettez des piles au rebus. Les piles uses doivent tre dposes dans un point de collecte adapt. 21. Utilisez lappareil dans un climat tropical et/ou modr. DNI LGAL MUSIC Group ne peut tre tenu pour responsable pour toute perte pouvant tre subie par toute personne se fi ant en partie ou en totalit toute description, photographie ou affi rmation contenue dans ce document. Les caractristiques, lapparence et dautres informations peuvent faire lobjet de modifi cations sans notifi cation. Toutes les marques appartiennent leurs propritaires respectifs. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA et DDA sont des marques ou marques dposes de MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017 Tous droits rservs. GARANTIE LIMITE Pour connatre les termes et conditions de garantie applicables, ainsi que les informations supplmentaires et dtailles sur la Garantie Limite de MUSIC Group, consultez le site Internet music-group.com/warranty. 4 iNSPIRE iP3000 Consignes de scurit Les points reprs par ce symbole portent une tension lectrique suffi sante pour constituer un risque dlectrocution. Utilisez uniquement des cbles denceintes professionnels de haute qualit avec fi ches Jack mono 6,35 mm ou fi ches verrouillages dj installes. Touteautre installation ou modifi cation doit tre eff ectue uniquement par un personnel qualifi . Ce symbole avertit de la prsence dune tension dangereuse et non isole lintrieur de lappareil - elle peut provoquer des chocs lectriques. Attention Ce symbol signale les consignes dutilisation et dentre ! Tien importantes dans la documentation fournie. Lisez les consignes de scurit du manuel dutilisation de lappareil. Attention Pour viter tout risque de choc lectrique, ne pas ouvrir le capot de lappareil ni dmonter le panneau arrire. Lintrieur de lappareil ne possde aucun lment rparable par lutilisateur. Laissertoute rparation un professionnel qualifi . Attention Pour rduire les risques de feu et de choc lectrique, nexposez pas cet appareil la pluie, la moisissure, aux gouttes ou aux claboussures. Ne posez pas de rcipient contenant un liquide sur lappareil (un vase par exemple). Attention Ces consignes de scurit et dentretien sont destines un personnel qualifi . Pourviter tout risque de choc lectrique, neff ectuez aucune rparation sur lappareil qui ne soit dcrite par le manuel dutilisation. Les ventuelles rparations doivent tre eff ectues uniquement par un technicien spcialis. 1. Lisez ces consignes. 2. Conservez ces consignes. 3. Respectez tous les avertissements. 4. Respectez toutes les consignes dutilisation. 5. Nutilisez jamais lappareil proximit dun liquide. 6. Nettoyez lappareil avec un chiff on sec. 7. Veillez ne pas empcher la bonne ventilation de lappareil via ses oues de ventilation. Respectezles consignes du fabricant concernant linstallation delappareil. 8. Ne placez pas lappareil proximit dune source de chaleur telle quun chauff age, une cuisinire ou tout appareil dgageant de la chaleur (y compris un ampli depuissance). 9. Ne supprimez jamais la scurit des prises bipolaires ou des prises terre. Les prises bipolaires possdent deux contacts de largeur diff rente. Leplus large est le contact de scurit. Les prises terre possdent deux contacts plus une mise la terre servant de scurit. Si la prise du bloc dalimentation ou du cordon dali-mentation fourni ne correspond pas celles de votre installation lectrique, faites appel un lectricien pour eff ectuer le changement de prise. 10. Installez le cordon dalimentation de telle faon que personne ne puisse marcher dessus et quil soit protg dartes coupantes. Assurez-vous que le cordon dalimentation est sufsamment protg, notamment au niveau de sa prise lectrique et de lendroit o il est reli lappareil; cela est galement valable pour une ventuelle rallonge lectrique. 11. Utilisez exclusivement des accessoires et des appareils supplmentaires recommands par lefabricant. 12. Utilisez exclusivement des chariots, des diables, desprsentoirs, despieds et des surfaces de travail recommands par le fabricant ou livrs avec le produit. Dplacezprcautionneusement tout chariot ou diable charg pour viter dventuelles blessures en cas dechute. 13. Dbranchez lappareil de la tension secteur en cas dorage ou si lappareil reste inutilis pendant une longue priode de temps. 14. Les travaux dentretien de lappareil doivent tre eff ectus uniquement par du personnel quali. Aucunentretien nest ncessaire sauf si lappareil est endommag de quelque faon que ce soit (dommagessur le cordon dalimentation ou la prise par exemple), siun liquide ou un objet a pntr lintrieur du chssis, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas correctement ou la suite dune chute. 15. Lappareil doit tre connect une prise secteur dote dune protection par mise la terre. 16. La prise lectrique ou la prise IEC de tout appareil dnu de bouton marche/arrt doit rester accessible enpermanence. 17. Mise au rebut approprie de ce produit: Ce symbole indique quen accord avec la directive DEEE
(2012/19/EU) et les lois en vigueur dans votre pays, ce produit ne doit pas tre jet avec les dchets mnagers. Ce produit doit tre dpos dans un point de collecte agr pour le recyclage des dchets dquipements lectriques et lectroniques
(EEE). Une mauvaise manipulation de ce type de dchets pourrait avoir un impact ngatif sur lenvironnement et la sant cause des substances potentiellement dangereuses gnralement associes ces quipements. En mme temps, votre coopration dans la mise au rebut de ce produit contribuera lutilisation effi cace des ressources naturelles. Pour plus dinformations sur lendroit o vous pouvez dposer vos dchets Wichtige Sicherheitshinweise Vorsicht Die mit dem Symbol markierten Anschlsse fhren so viel Spannung, dassdie Gefahr eines Stromschlags besteht. Verwenden Sie nur hochwertige, professionelle Lautsprecherkabel mit vorinstallierten 6,35 mm MONO-Klinkensteckern oder Lautsprecherstecker mit Drehverriegelung. Alle anderen Installationen oder Modifi kationen sollten nur von qualifi ziertem Fachpersonal ausgefhrt werden. Achtung Um eine Gefhrdung durch Stromschlag auszuschlieen, darf die Gerteabdeckung bzw. Gerterckwand nicht abgenommen werden. ImInnern des Gerts befi nden sich keine vom Benutzer reparierbaren Teile. Reparaturarbeiten drfen nur von qualifi ziertem Personal ausgefhrt werden. Achtung Um eine Gefhrdung durch Feuer bzw. Stromschlag auszuschlieen, darf dieses Gert weder Regen oder Feuchtigkeit ausgesetzt werden noch sollten Spritzwasser oder tropfende Flssigkeiten in das Gert gelangen knnen. Stellen Sie keine mit Flssigkeit gefllten Gegenstnde, wie z. B. Vasen, aufdasGert. Achtung Die Service-Hinweise sind nur durch qualifi ziertes Personal zu befolgen. Umeine Gefhrdung durch Stromschlag zu vermeiden, fhren Sie bitte keinerlei Reparaturen an dem Gert durch, die nicht in der Bedienungsanleitung beschrieben sind. Reparaturen sind nur von qualifi ziertem Fachpersonaldurchzufhren. 1. Lesen Sie diese Hinweise. 2. Bewahren Sie diese Hinweise auf. 3. Beachten Sie alle Warnhinweise. 4. Befolgen Sie alle Bedienungshinweise. 5. Betreiben Sie das Gert nicht in der Nhe vonWasser. 6. Reinigen Sie das Gert mit einem trockenen Tuch. 7. Blockieren Sie nicht die Belftungsschlitze. Beachten Sie beim Einbau des Gertes die Herstellerhinweise. 8. Stellen Sie das Gert nicht in der Nhe von Wrmequellen auf. Solche Wrmequellen sind z. B. Heizkrper, Herde oder andere Wrme erzeugende Gerte
(auch Verstrker). 9. Entfernen Sie in keinem Fall die Sicherheitsvorrichtung von Zweipol- oder geerdeten Steckern. Ein Zweipolstecker hat zwei unterschiedlich breite Steckkontakte. Ein geerdeter Stecker hat zwei Steckkontakte und einen dritten Erdungskontakt. Derbreitere Steckkontakt oder der zustzliche Erdungskontakt dient Ihrer Sicherheit. Falls das mitgelieferte Steckerformat nicht zu Ihrer Steckdose passt, wenden Sie sich bitte an einen Elektriker, damit die Steckdose entsprechend ausgetauscht wird. 10. Verlegen Sie das Netzkabel so, dass es vor Tritten und scharfen Kanten geschtzt ist und nicht beschdigt werden kann. Achten Sie bitte insbesondere im Bereich der Stecker, Verlngerungskabel und an der Stelle, an der das Netzkabel das Gert verlsst, aufausreichendenSchutz. 11. Das Gert muss jederzeit mit intaktem Schutzleiter an das Stromnetz angeschlossen sein. 12. Sollte der Hauptnetzstecker oder eine Gertesteckdose die Funktionseinheit zum Abschalten sein, muss diese immer zugnglich sein. 13. Verwenden Sie nur Zusatzgerte/Zubehrteile, dielaut Hersteller geeignet sind. 14. Verwenden Sie nur Wagen, Standvorrichtungen, Stative, Halter oder Tische, die vom Hersteller benannt oder im Lieferumfang des Gerts enthalten sind. Falls Sie einen Wagen benutzen, seien Sie vorsichtig beim Bewegen der Wagen- Gertkombination, umVerletzungen durch Stolpern zuvermeiden. 15. Ziehen Sie den Netzstecker bei Gewitter oder wenn Sie das Gert lngere Zeit nicht benutzen. 16. Lassen Sie alle Wartungsarbeiten nur von qualifi ziertem Service-Personal ausfhren. EineWartung ist notwendig, wenn das Gert in irgendeiner Weise beschdigt wurde (z. B. Beschdigung des Netzkabels oder Steckers), Gegenstnde oder Flssigkeit in das Gerteinnere gelangt sind, das Gert Regen oder Feuchtigkeit ausgesetzt wurde, das Gert nicht ordnungsgem funktioniert oder auf den Boden gefallen ist. 17. Korrekte Entsorgung dieses Produkts: Dieses Symbol weist darauf hin, das Produkt entsprechend der WEEE Direktive
(2012/19/EU) und der jeweiligen nationalen Gesetze nicht zusammen mit Ihren Haushaltsabfllen zu entsorgen. DiesesProdukt sollte bei einer autorisierten Sammelstelle fr Recycling elektrischer und elektronischer Gerte (EEE) abgegeben werden. Wegen bedenklicher Substanzen, diegenerell mit elektrischen und elektronischen Gerten in Verbindung stehen, knnte eine unsachgeme Behandlung dieser Abfallart eine negative Auswirkung auf Umwelt und Gesundheit haben. Gleichzeitig gewhrleistet Ihr Beitrag zur richtigen Entsorgung dieses Produkts die eff ektive Nutzung natrlicher Ressourcen. Frweitere Informationen zur Entsorgung Ihrer Gerte bei einer Recycling-Stelle nehmen Sie bitte Kontakt zum zustndigen stdtischen Bro, Entsorgungsamt oder zu Ihrem Haushaltsabfallentsorgerauf. 18. No instale em lugares confi nados, tais como estantes ou unidades similares. 19. No coloque fontes de chama, tais como velas acesas, sobre o aparelho. 20. Favor, obedecer os aspectos ambientais de descarte de bateria. Baterias devem ser descartadas em um ponto de coletas de baterias. 21. Use este aparelho em climas tropicais e/ou moderados. LEGAL RENUNCIANTE O MUSIC Group no se responsabiliza por perda alguma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrio, fotografi a, ou declarao aqui contidas. Dados tcnicos, aparncias e outras informaes esto sujeitas a modifi caes sem aviso prvio. Todas as marcas so propriedade de seus respectivos donos. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA e DDA so marcas ou marcas registradas do MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017 Todos direitos reservados. GARANTIA LIMITADA Para obter os termos de garantia aplicveis e condies e informaes adicionais a respeito da garantia limitada do MUSIC Group, favor verifi car detalhes na ntegra atravs do website music-group.com/warranty. 6 iNSPIRE iP3000 Instrues de Segurana Importantes Aviso!
Terminais marcados com o smbolo carregam corrente eltrica de magnitude sufi ciente para constituir um risco de choque eltrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de " ou plugues com trava de toro pr-instalados. Todas as outras instalaes e modifi caes devem ser efetuadas por pessoasqualifi cadas. Este smbolo, onde quer que o encontre, alerta-o para a leitura das instrues de manuseamento que acompanham o equipamento. Por favor leia o manual de instrues. Ateno De forma a diminuir o risco de choque elctrico, no remover a cobertura
(ouaseco de trs). No existem peas substituveis por parte do utilizador no seu interior. Para esse efeito recorrer a um tcnico qualifi cado. Ateno Para reduzir o risco de incndios ou choques elctricos o aparelho no deve ser exposto chuva nem humidade. Alm disso, no deve ser sujeito a salpicos, nem devem ser colocados em cima do aparelho objectos contendo lquidos, tais como jarras. Ateno Estas instrues de operao devem ser utilizadas, em exclusivo, por tcnicos de assistncia qualifi cados. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao, salvo se possuir as qualifi -caes necessrias. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao. S o dever fazer se possuir as qualifi caes necessrias. 1. Leia estas instrues. 2. Guarde estas instrues. 3. Preste ateno a todos os avisos. 4. Siga todas as instrues. 5. No utilize este dispositivo perto de gua. 6. Limpe apenas com um pano seco. 7. No obstrua as entradas de ventilao. Instale de acordo com as instrues do fabricante. 8. No instale perto de quaisquer fontes de calor tais como radiadores, bocas de ar quente, foges de sala ou outros aparelhos (incluindo amplifi cadores) que produzam calor. 9. No anule o objectivo de segurana das fi chas polarizadas ou do tipo de ligao terra. Uma fi cha polarizada dispe de duas palhetas sendo uma mais larga do que a outra. Uma fi cha do tipo ligao terra dispe de duas palhetas e um terceiro dente de ligao terra. A palheta larga ou o terceiro dente so fornecidos para sua segurana. Se a fi cha fornecida no encaixar na sua tomada, consulte um electricista para a substituio da tomada obsoleta. 10. Proteja o cabo de alimentao de pisadelas ou apertos, especialmente nas fi chas, extenses, e no local de sada da unidade. Certifi que-se de que o cabo elctrico est protegido. Verifi que particularmente nas fi chas, nos receptculos e no ponto em que o cabo sai doaparelho. 11. O aparelho tem de estar sempre conectado rede elctrica com o condutor de proteco intacto. 12. Se utilizar uma fi cha de rede principal ou uma tomada de aparelhos para desligar a unidade de funcionamento, esta deve estar sempre acessvel. 13. Utilize apenas ligaes/acessrios especifi cados pelofabricante. 14. Utilize apenas com o carrinho, estrutura, trip, suporte, ou mesa especifi cados pelo fabricante ou vendidos com o dispositivo. Quandoutilizar um carrinho, tenha cuidado ao mover o conjunto carrinho/dispositivo para evitar danos provocados pela terpidao. 15. Desligue este dispositivo durante as trovoadas ou quando no for utilizado durante longos perodos detempo. 16. Qualquer tipo de reparao deve ser sempre efectuado por pessoal qualifi cado. necessria uma reparao sempre que a unidade tiver sido de alguma forma danifi cada, como por exemplo: no caso do cabo de alimentao ou fi cha se encontrarem danifi cados;
naeventualidade de lquido ter sido derramado ou objectos terem cado para dentro do dispositivo; no caso da unidade ter estado exposta chuva ou humidade;
seesta no funcionar normalmente, ou se tiver cado. 17. Correcta eliminao deste produto: este smbolo indica que o produto no deve ser eliminado juntamente com os resduos domsticos, segundo a Directiva REEE (2012/19/EU) e a legislao nacional. Este produto dever ser levado para um centro de recolha licenciado para a reciclagem de resduos de equipamentos elctricos e electrnicos (EEE). O tratamento incorrecto deste tipo de resduos pode ter um eventual impacto negativo no ambiente e na sade humana devido a substncias potencialmente perigosas que esto geralmente associadas aos EEE. Ao mesmo tempo, a sua colaborao para a eliminao correcta deste produto ir contribuir para a utilizao efi ciente dos recursos naturais. Paramais informao acerca dos locais onde poder deixar o seu equipamento usado para reciclagem, favor contactar os servios municipais locais, a entidade de gesto de resduos ou os servios de recolha de resduosdomsticos. Quick Start Guide 7 18. 19. 20. 21. /
MUSIC Group MIDASKLARK TEKNIKLAB GRUPPEN LAKETANNOYTURBOSOUNDTC ELECTRONIC TC HELICONBEHRINGERBUGERA DDA MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017 MUSIC Group music-group.com/warranty
.
" TS 1. 2. 3. 4. 5. 6. 7. 8. 9.
() 10. 11. () 12. 13. 14. 15. 16. 17. 8 iNSPIRE iP3000 11.
12.
13.
14.
15.
16.
17.
2000
'' TS
1. 2. 3. 4. 5. 6. 7.
8.
9.
10.
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information about this or any other TURBOSOUND product, please visit our website at turbosound.com. Unpacking the Loudspeaker After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of futurere-shipment. For iP3000, covers and shoulder bags are available separately. Quick Start Guide 9 Assembly
MUSIC Group
MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA DDA MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2017
music-group.com/warranty
iP3000 iP3000 speakers ship with separate base and column elements that will need to be assembled. To assemble the speakers, follow these steps:
1. Make sure the unit is switched off . 2. Place the base unit onto a fi rm, level surface, with the column connection inputs facing upward. 3. Align the speaker column over the base units connection inputs with the column connectors facingdownward. 4. Lower the speaker column into the connection input and gently press downward until the column connectors slot into place. Note: iP3000 features a 2-piece column assembly. Connect the lower column assembly to the base unit fi rst, and then connect the upper column segment directly on top of the lower segment. Once the column assembly is fi rmly slotted into place, the iP speakers will automatically make all powerand audio connections between the base unit and the speaker column. iNSPIRE iP3000 10 Controls
(2)
(3)
(4)
(1)
(6)
(5)
(7)
(8)
(1) ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated). LCD SCREEN displays the current DSP module and parameter settings.
(2)
(3) PROCESS button accesses the DSP signal processing menu.
(4) SETUP accesses the setup features menu.
(5) EXIT button saves changes and returns to the previous menu screen.
(6) ENTER button selects sub-menu or confi rms parameter changes.
(7)
(8) INPUT A/INPUT B combo jacks accept input signals using XLR, balanced " TRS or unbalanced "TSconnectors. LINK A/LINK B XLR connectors provide un-processed copies of the INPUT A or INPUT B signals. iP DSP Menu Structure Menu Sub-Menu Fullrange Function Quick Start Guide 11 Main Screen Displays level indicators and model name. Displays the following Bluetooth* statusinformation:
Bluetooth symbol indicates connection to audio and remote control device (iPhone*, etc.). M or S below the Bluetooth symbol indicate that the speaker is linked to another iP speaker as MASTER
(left channel, M) or SLAVE (right channel, S). Rotate the encoder knob to adjust the output volume. Press the encoder knob enter the last used sub-menu. Press the Process and Setup buttons to access sub-menus. Volume Rotate the encoder to change the outputvolume. MODE INPUT EQ
(Equalisation) POSIT.
(Position) BT
(Bluetooth) Selects from 4 preset equalisations, depending on function and music type. Sets input mixer gain for analogue input A and B, as well as Bluetooth. Allows adjustment of three band equaliser control, bass, midrange and treble. Selects DSP compensation depending on the speaker position:
corner, wall or fl oor. Lets you pair the speaker with mobile Bluetooth devices and link to another iPspeaker as master / slave. SUBWOOFER Allows control of subwoofer relative level. SETUP INFO Sets LCD back panel contrast, device lock and factory reset. Displays model and fi rmware information.
*iPhone is a trademark of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. iP Series Analogue Connection Despite their sophistication, iP speakers off er straightforward analogue connectivity, and you can easily arrange the iP system to allow simple control of levels from other devices, such as mixers. You can also daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall level from your mixers master fader. For example, you have four iP speakers and a mixer with simple left-right stereo outputs. For typical operation, set the DSP volume and input gain settings on all speakers to a fl at 0 dB setting. Connect the mixers left and right stereo outputs to the fi rst two speakers analogue INPUT A connections (the left and right mixer outputs will go to separate speakers). Then, run cables from the OUTPUT analogue connections to the remaining two speakers. In a similar way, subwoofers can also be linked to the analogueOUTPUT. 12 iNSPIRE iP3000 iP Series Bluetooth Instructions Bluetooth Connection To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad*/iPhone/Android*/Windows* device with basic Bluetooth connectivity. With a basic Bluetooth connection, allrelated iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder. For Apple* iOS devices, you can also download a dedicated TURBOSOUND iP Bluetooth app from the App Store. This iP Bluetooth app allows you to control a single or stereo pair of iP speakers, including all DSP functions, remotely from your iOS device (see Bluetooth Control below for moreinformation). Bluetooth Streaming To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.) Mono operation 1. 2. 3. Enable Bluetooth on your remote device. Switch on your iP speaker and minimize the volume. Select Pair device from the iP speakers Bluetooth menu. 4. Check that your remote device is searching for a connection. 5. Once your device detects the iP speaker, select the iP speaker from your remote devices menu (e.g.,TURBOSOUND iP2000). 6. Wait until the remote device shows an active connection, and then check the speakers Bluetooth menu, which should display the name of the remote device
(e.g., HUAWEI P7-L07). 7. 8. Bluetooth music can now be streamed to your iP speaker. The stereo signal will automatically mix downtomono. The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen. Stereo operation 1. 2. 3. 4. Complete the steps above to connect the fi rst speaker to Bluetooth audio. The fi rst connected speaker automatically becomes the MASTER speaker. Switch on the second speaker, which becomes the SLAVE speaker. Select Link speaker from the SLAVE speaker's Bluetooth menu. The SLAVE speaker will display Slave linking... Select Link speaker from the MASTER speakers Bluetooth menu. The MASTER speaker will display Master Linking... 5. 6. 7. 8. WAIT for the speakers to link. 9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel. 10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Quick Start Guide 13 Bluetooth Control A dedicated iOS control app for TURBOSOUND Bluetooth speakers can be downloaded from the AppStore. This iOS control app can be used with Bluetooth pairing, or without pairing if only analogue inputs are used. Operation with Bluetooth Pairing In both mono and stereo mode, fi rst pair the MASTER speaker, and then launch the iOS control app. The iOS control app will automatically detect and adapt for mono or stereo mode. To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app. Operation without Bluetooth Pairing (Analogue Input Only) Power on the fi rst (usually left-hand) speaker this speaker will become the MASTER speaker. Start the control app on the IOS device. Check that the app is connected and functioning with the single MASTER speaker. Power up the second speaker this speaker becomes the SLAVE speaker. Check that the apps Main Page shows both MASTER and SLAVE input and balance control. Main Page (1 speaker) Main Page (2 speakers linked) Settings Page IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualifi ed personnel with the required experience and certifi cation to perform the necessary tasks. Walls, fl oors or ceilings must be capable of safely and securely supporting the actual load. Themounting accessory used must be safely and securely fi xed both to the loudspeaker and to the wall, fl oor or ceiling. When mounting rigging components on walls, fl oors or ceilings, ensure that all fi xings and fasteners used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fi xing arrangement can be safely employed for a particular load. Cavity plugs or other specialist fi xings, if required, must be of an appropriate type, and must be fi tted and used in accordance with the makersinstructions. The operation of your speaker cabinet as part of a fl own system, if installed incorrectly and improperly, canpotentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualifi ed and certifi ed (by local state or national authorities) personnel prior to any installation or fl ying. Make sure that speaker cabinets are set up and fl own by qualifi ed and certifi ed personnel only, usingdedicated equipment and original parts and components delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system. Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed Service Information Sheet, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular checks must be conducted by qualifi ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is fl own, the area underneath the speaker is free of human traffi c. Do not fl y the speaker in areas that can be entered or used by members of the public. Speakers create a magnetic fi eld, even if not in operation. Therefore, please keep all materials that can be aff ected by such fi elds (discs, computers, monitors, etc) at a safe distance. A safe distance is usually between 1 and 2 metres. 14 iNSPIRE iP3000 Technical Specifi cations Quick Start Guide 15 Power Supply Power consumption Voltage (fuses) USA / Canada / Japan UK / Australia / Europe Korea / China Enclosure Dimensions (H x W x D) Base Tower Net weight Construction, base Construction, tower Finish Grille Accessories iP3000 110 W @ 18 max power 100-120 V~, 50/60 Hz (T 10A H 250 V) 220-240 V~, 50/60 Hz (T 5 A H 250 V) 220-240 V~, 50/60 Hz (T 5 A H 250 V) 2214 x 620x 620 mm (87.2 x 24.4 x 24.4") 415 x 620 x 620 mm (16.3 x 24.4 x 24.4") 1011 x119 x 137 mm (39.8 x 4.7 x 5.4") 51.8kg (114 lbs) 15 mm (58") birch plywood Aluminium alloy Semi matt black paint Powder coated perforated steel
*independent of limiters and driver protection circuits Only qualifi ed personnel are allowed to modify the AC-Main cord and to adhere to all applicable national standards. System Frequency response Nominal dispersion Maximum SPL Crossover type Transducers Limiter Amplifi er Maximum output power*
Type Protection Amplifi er channels Connectors Input A / B Sensitivity Input impedance Maximum input level Link output Mains supply Controls Hardware Software User DSP Functions Factory EQ presets Display Equalisation Bass Trebel Reverb Converter Sampling rate Protection Bluetooth Wireless Technology Frequency range Channel number Version Output Compatibility Maximum communication range Connectivity iP3000 45 Hz 20 kHz 3 dB 40Hz 20 kHz -10 dB 120 H @ -6 dB points 130 dB 55 way, active 2 x 12" (308mm) LF driver 16 x 3.5" (88.9 mm) MF drivers 2 x 1" (25.4 mm) HF drivers Independent high and low frequency limiters 2000 W Class-D Short circuit, open circuit, thermal 6 2 x combo jack / XLR 4 dBu, nominal 16 k unbalanced, 33 k balanced
+22 dBu XLR IEC mains connector with integrated powerswitch Rotary push-encoder iOS interface via Bluetooth Positioning, sound mode LCD 128 x 32, blue, backlit 10 dB @ 80 Hz, shelving 10 dB @ 12 kHz, shelving 24-bit Delta-Sigma 64/128-times oversampling 40Khz Lock-out function for all settings 2402 MHz ~ 2480 MHz 79 Bluetooth 4.0 dual mode 8 dBM Supports A2DP 1.2 profi le 30 m Master-slave: stereo pairing link 16 iNSPIRE iP3000 Other important information Important information 1. Register online. Please register your new MUSIC Group equipment right after you purchase it by visiting turbosound. com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and effi ciently. Also, read the terms and conditions of our warranty, ifapplicable. 2. Malfunction. Should your MUSICGroup Authorized Reseller not be located in your vicinity, youmay contact the MUSICGroup Authorized Fulfi ller for your country listed under Support at turbosound. com. Shouldyour country not be listed, please check if your problem can be dealt with by our OnlineSupport which may also be found under Support at turbosound. com. Alternatively, please submit an online warranty claim at turbosound. com BEFORE returning theproduct. 3. Power Connections. Beforeplugging the unit into a power socket, pleasemake sure you are using the correct mains voltage for your particular model. Faultyfuses must be replaced with fuses of the same typeand rating withoutexception. Quick Start Guide 17 FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION TURBOSOUND iNSPIRE iP3000 Responsible Party Name:
Address:
Phone Number:
MUSIC GROUP SERVICES NV INC. 5270 PROCYON STREET LAS VEGAS, NV 89118 USA
+1 702 800 8290 iNSPIRE iP3000 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Caution!
The manufacturer is not responsible for any radio or TVinterference caused by unauthorized modifi cations to this equipment. Such modifi cations could void the user authority tooperate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, includinginterference that may cause undesired operation. This product complies with the requirements of Directive of 2014/53/EU.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-05-24 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2017-05-24
|
||||
1 2 | Applicant's complete, legal business name |
MUSIC Tribe Manufacturing PH Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0022048235
|
||||
1 2 | Physical Address |
17A Brunswick Street Hamilton HM 10 Bermuda
|
||||
1 2 |
Hamilton, N/A
|
|||||
1 2 |
Bermuda
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
j******@eurofins.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
QWH
|
||||
1 2 | Equipment Product Code |
IP3000
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
K****** X******
|
||||
1 2 | Title |
Innovation Compliance EMC
|
||||
1 2 | Telephone Number |
0760-******** Extension:
|
||||
1 2 | Fax Number |
0760-********
|
||||
1 2 |
I******@music-group.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Speaker | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
D**** D****
|
||||
1 2 | Telephone Number |
00867******** Extension:
|
||||
1 2 | Fax Number |
0086 ********
|
||||
1 2 |
d******@btl.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0069300 | ppm | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0090000 | ppm |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC