all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 815.74 KiB | June 08 2015 | |||
1 2 | Cover Letter(s) | June 08 2015 | ||||||
1 2 | Cover Letter(s) | June 08 2015 | ||||||
1 2 | External Photos | June 08 2015 | ||||||
1 2 | Internal Photos | June 08 2015 | ||||||
1 2 | ID Label/Location Info | June 08 2015 | ||||||
1 2 | RF Exposure Info | June 08 2015 | ||||||
1 2 | Test Report | June 08 2015 | ||||||
1 2 | Test Setup Photos | June 08 2015 | ||||||
1 2 | Test Report | June 08 2015 |
1 2 | User Manual | Users Manual | 815.74 KiB | June 08 2015 |
iPSERIES LEGAL DISCLAIMER MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical speci cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2015 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding MUSIC Groups Limited Warranty, please see complete details online at music-group.com/warranty. 2 iP series Important Safety Instructions Terminals marked with this symbol carry electrical current of suf cient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with plugs pre-installed. All other installation or modi cation should be performed only by quali ed personnel. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure -
voltage that may be suf cient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to quali ed personnel. Caution To reduce the risk of re or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects lled with liquids, such as vases, shall be placed on the apparatus. Caution These service instructions are for use by quali ed service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by quali ed service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Use only attachments/accessories speci ed by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the ef cient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city of ce, or your household waste collection service. Quick Start Guide 3 17. Cmo debe deshacerse de este aparato: Este smbolo indica que este aparato no debe ser tratado como basura orgnica, segn lo indicado en la Directiva WEEE (2012/19/EU) y a las normativas aplicables en su pas. En lugar de ello deber llevarlo al punto limpio ms cercano para el reciclaje de sus elementos elctricos / electrnicos (EEE). Al hacer esto estar ayudando a prevenir las posibles consecuencias negativas para el medio ambiente y la salud que podran ser provocadas por una gestin inadecuada de este tipo de aparatos. Adems, el reciclaje de materiales ayudar a conservar los recursos naturales. Para ms informacin acerca del reciclaje de este aparato, pngase en contacto con el Ayuntamiento de su ciudad o con el punto limpio local. NEGACIN LEGAL MUSIC Group no admite ningn tipo de responsabilidad por cualquier dao o prdida que pudiera sufrir cualquier persona por con ar total o parcialmente en la descripciones, fotografas o a rmaciones contenidas en este documento. Las especi caciones tcnicas, imgenes y otras informaciones contenidas en este documento estn sujetas a modi caciones sin previo aviso. Todas las marcas comerciales que aparecen aqu son propiedad de sus respectivos dueos. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA y DDA son marcas comerciales o marcas registradas de MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2015 Reservados todos los derechos. GARANTA LIMITADA Si quiere conocer los detalles y condiciones aplicables de la garanta as como informacin adicional sobre la Garanta limitada de MUSIC group, consulte online toda la informacin en la web music-group.com/warranty. Instrucciones de seguridad Las terminales marcadas con este smbolo transportan corriente elctrica de magnitud su ciente como para constituir un riesgo de descarga elctrica. Utilice solo cables de altavoz de alta calidad con clavijas TS de 6,3 mm pre-instaladas
(puede adquirirlos en comercios especializados en audio). Cualquier otra instalacin o modi cacin debe ser realizada nicamente por un tcnico cuali cado. Este smbolo, siempre que aparece, le advierte de la presencia de voltaje peligroso sin aislar dentro de la caja; este voltaje puede ser su ciente para constituir un riesgo de descarga. Este smbolo, siempre que aparece, le advierte sobre instrucciones operativas y de mantenimiento que aparecen en la documentacin adjunta. Por favor, lea el manual. Atencin Para reducir el riesgo de descarga elctrica, no quite la tapa (o la parte posterior). No hay piezas en el interior del equipo que puedan ser reparadas por el usuario. Si es necesario, pngase en contacto con personal cuali cado. Atencin Para reducir el riesgo de incendio o descarga elctrica, no exponga este aparato a la lluvia, humedad o alguna otra fuente que pueda salpicar o derramar algn lquido sobre el aparato. No coloque ningn tipo de recipiente para lquidos sobre el aparato. Atencin Las instrucciones de servicio deben llevarlas a cabo exclusivamente personal cuali cado. Para evitar el riesgo de una descarga elctrica, no realice reparaciones que no se encuentren descritas en el manual de operaciones. Las reparaciones deben ser realizadas exclusivamente por personal cuali cado. 1. Lea las instrucciones. 2. Conserve estas instrucciones. 3. Preste atencin a todas las advertencias. 4. Siga todas las instrucciones. 5. No use este aparato cerca del agua. 6. Limpie este aparato con un pao seco. 7. No bloquee las aberturas de ventilacin. Instale el equipo de acuerdo con las instrucciones del fabricante. 8. No instale este equipo cerca de fuentes de calor tales como radiadores, acumuladores de calor, estufas u otros aparatos (incluyendo ampli cadores) que puedan producir calor. 9. No elimine o deshabilite nunca la conexin a tierra del aparato o del cable de alimentacin de corriente. Un enchufe polarizado tiene dos polos, uno de los cuales tiene un contacto ms ancho que el otro. Una clavija con puesta a tierra dispone de tres contactos: dos polos y la puesta a tierra. El contacto ancho y el tercer contacto, respectivamente, son los que garantizan una mayor seguridad. Si el enchufe suministrado con el equipo no concuerda con la toma de corriente, consulte con un electricista para cambiar la toma de corriente obsoleta. 10. Coloque el cable de suministro de energa de manera que no pueda ser pisado y que est protegido de objetos a lados. Asegrese de que el cable de suministro de energa est protegido, especialmente en la zona de la clavija y en el punto donde sale del aparato. 11. Use nicamente los dispositivos o accesorios especi cados por el fabricante. 12. Use nicamente la carretilla, plataforma, trpode, soporte o mesa especi cados por el fabricante o suministrados junto con el equipo. Al transportar el equipo, tenga cuidado para evitar daos y cadas al tropezar con algn obstculo. 13. Desenchufe el equipo durante tormentas o si no va a utilizarlo durante un periodo largo. 14. Confe las reparaciones nicamente a servicios tcnicos cuali cados. La unidad requiere mantenimiento siempre que haya sufrido algn dao, si el cable de suministro de energa o el enchufe presentaran daos, se hubiera derramado un lquido o hubieran cado objetos dentro del equipo, si el aparato hubiera estado expuesto a la humedad o la lluvia, si ha dejado de funcionar de manera normal o si ha sufrido algn golpe o cada. 15. Al conectar la unidad a la toma de corriente elctrica asegrese de que la conexin disponga de una unin a tierra. 16. Si el enchufe o conector de red sirve como nico medio de desconexin, ste debe ser accesible fcilmente. Quick Start Guide 5 die generell mit elektrischen und elektronischen Gerten in Verbindung stehen, knnte eine unsachgeme Behandlung dieser Abfallart eine negative Auswirkung auf Umwelt und Gesundheit haben. Gleichzeitig gewhrleistet Ihr Beitrag zur richtigen Entsorgung dieses Produkts die effektive Nutzung natrlicher Ressourcen. Fr weitere Informationen zur Entsorgung Ihrer Gerte bei einer Recycling-Stelle nehmen Sie bitte Kontakt zum zustndigen stdtischen Bro, Entsorgungsamt oder zu Ihrem Haushaltsabfallentsorger auf. HAFTUNGSAUSSCHLUSS MUSIC Group bernimmt keine Haftung fr Verluste, die Personen entstanden sind, die sich ganz oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen knnen ohne vorherige Ankndigung gendert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA und DDA sind Warenzeichen oder eingetragene Warenzeichen der MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2015 Alle Rechte vorbehalten. BESCHRNKTE GARANTIE Die geltenden Garantiebedingungen und zustzliche Informationen bezglich der von MUSIC Group gewhrten beschrnkten Garantie nden Sie online unter music-group.com/warranty. 17. Mise au rebut approprie de ce produit:
Ce symbole indique quen accord avec la directive DEEE (2012/19/EU) et les lois en vigueur dans votre pays, ce produit ne doit pas tre jet avec les dchets mnagers. Ce produit doit tre dpos dans un point de collecte agr pour le recyclage des dchets dquipements lectriques et lectroniques
(EEE). Une mauvaise manipulation de ce type de dchets pourrait avoir un impact ngatif sur lenvironnement et la sant cause des substances potentiellement dangereuses gnralement associes ces quipements. En mme temps, votre coopration dans la mise au rebut de ce produit contribuera lutilisation ef cace des ressources naturelles. Pour plus dinformations sur lendroit o vous pouvez dposer vos dchets dquipements pour le recyclage, veuillez contacter votre mairie ou votre centre local de collecte des dchets. DNI LGAL MUSIC Group ne peut tre tenu pour responsable pour toute perte pouvant tre subie par toute personne se ant en partie ou en totalit toute description, photographie ou af rmation contenue dans ce document. Les caractristiques, lapparence et dautres informations peuvent faire lobjet de modi cations sans noti cation. Toutes les marques appartiennent leurs propritaires respectifs. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA et DDA sont des marques ou marques dposes de MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2015 Tous droits rservs. GARANTIE LIMITE Pour connatre les termes et conditions de garantie applicables, ainsi que les informations supplmentaires et dtailles sur la Garantie Limite de MUSIC Group, consultez le site Internet music-group.com/warranty. 4 iP series Consignes de scurit Les points reprs par ce symbole portent une tension lectrique suf sante pour constituer un risque dlectrocution. Utilisez uniquement des cbles denceintes de haute qualit disponibles dans les points de vente avec les connecteurs Jack mono 6,35 mm dj installs. Toute autre installation ou modi cation doit tre effectue uniquement par un personnel quali . Ce symbole avertit de la prsence dune tension dangereuse et non isole lintrieur de lappareil - elle peut provoquer des chocs lectriques. Attention Ce symbol signale les consignes dutilisation et dentre ! Tien importantes dans la documentation fournie. Lisez les consignes de scurit du manuel dutilisation de lappareil. Attention Pour viter tout risque de choc lectrique, ne pas ouvrir le capot de lappareil ni dmonter le panneau arrire. Lintrieur de lappareil ne possde aucun lment rparable par lutilisateur. Laisser toute rparation un professionnel quali . Attention Pour rduire les risques de feu et de choc lectrique, nexposez pas cet appareil la pluie, la moisissure, aux gouttes ou aux claboussures. Ne posez pas de rcipient contenant un liquide sur lappareil (un vase par exemple). Attention Ces consignes de scurit et dentretien sont destines un personnel quali . Pour viter tout risque de choc lectrique, neffectuez aucune rparation sur lappareil qui ne soit dcrite par le manuel dutilisation. Les ventuelles rparations doivent tre effectues uniquement par un technicien spcialis. 1. Lisez ces consignes. 2. Conservez ces consignes. 3. Respectez tous les avertissements. 4. Respectez toutes les consignes dutilisation. 5. Nutilisez jamais lappareil proximit dun liquide. 6. Nettoyez lappareil avec un chiffon sec. 7. Veillez ne pas empcher la bonne ventilation de lappareil via ses oues de ventilation. Respectez les consignes du fabricant concernant linstallation de lappareil. 8. Ne placez pas lappareil proximit dune source de chaleur telle quun chauffage, une cuisinire ou tout appareil dgageant de la chaleur (y compris un ampli de puissance). 9. Ne supprimez jamais la scurit des prises bipolaires ou des prises terre. Les prises bipolaires possdent deux contacts de largeur diffrente. Le plus large est le contact de scurit. Les prises terre possdent deux contacts plus une mise la terre servant de scurit. Si la prise du bloc dalimentation ou du cordon dali-mentation fourni ne correspond pas celles de votre installation lectrique, faites appel un lectricien pour effectuer le changement de prise. 10. Installez le cordon dalimentation de telle faon que personne ne puisse marcher dessus et quil soit protg dartes coupantes. Assurez-vous que le cordon dalimentation est sufsamment protg, notamment au niveau de sa prise lectrique et de lendroit o il est reli lappareil;
cela est galement valable pour une ventuelle rallonge lectrique. 11. Utilisez exclusivement des accessoires et des appareils supplmentaires recommands par le fabricant. 12. Utilisez exclusivement des chariots, des diables, des prsentoirs, des pieds et des surfaces de travail recommands par le fabricant ou livrs avec le produit. Dplacez prcautionneusement tout chariot ou diable charg pour viter dventuelles blessures en cas de chute. 13. Dbranchez lappareil de la tension secteur en cas dorage ou si lappareil reste inutilis pendant une longue priode de temps. 14. Les travaux dentretien de lappareil doivent tre effectus uniquement par du personnel quali. Aucun entretien nest ncessaire sauf si lappareil est endommag de quelque faon que ce soit
(dommages sur le cordon dalimentation ou la prise par exemple), si un liquide ou un objet a pntr lintrieur du chssis, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas correctement ou la suite dune chute. 15. Lappareil doit tre connect une prise secteur dote dune protection par mise la terre. 16. La prise lectrique ou la prise IEC de tout appareil dnu de bouton marche/arrt doit rester accessible en permanence. Wichtige Sicherheitshinweise Vorsicht Die mit dem Symbol markierten Anschl sse f hren so viel Spannung, dass die Gefahr eines Stromschlags besteht. Verwenden Sie nur hochwertige, im Handel erhltliche Lautsprecherkabel mit vorinstallierten 6,3 mm TSSteckern. Alle anderen Installationen oder Modi kationen sollten nur von quali ziertem Fachpersonal ausgef hrt werden. Achtung Um eine Gefhrdung durch Stromschlag auszuschlieen, darf die Gerteabdeckung bzw. Gerterckwand nicht abgenommen werden. Im Innern des Gerts be nden sich keine vom Benutzer reparierbaren Teile. Reparaturarbeiten drfen nur von quali ziertem Personal ausgefhrt werden. Achtung Um eine Gefhrdung durch Feuer bzw. Stromschlag auszuschlieen, darf dieses Gert weder Regen oder Feuchtigkeit ausgesetzt werden noch sollten Spritzwasser oder tropfende Flssigkeiten in das Gert gelangen knnen. Stellen Sie keine mit Flssigkeit gefllten Gegenstnde, wie z. B. Vasen, auf das Gert. Achtung Die Service-Hinweise sind nur durch quali ziertes Personal zu befolgen. Um eine Gefhrdung durch Stromschlag zu vermeiden, fhren Sie bitte keinerlei Reparaturen an dem Gert durch, die nicht in der Bedienungsanleitung beschrieben sind. Reparaturen sind nur von quali ziertem Fachpersonal durchzufhren. 1. Lesen Sie diese Hinweise. 2. Bewahren Sie diese Hinweise auf. 3. Beachten Sie alle Warnhinweise. 4. Befolgen Sie alle Bedienungshinweise. 5. Betreiben Sie das Gert nicht in der Nhe von Wasser. 6. Reinigen Sie das Gert mit einem trockenen Tuch. 7. Blockieren Sie nicht die Belftungsschlitze. Beachten Sie beim Einbau des Gertes die Herstellerhinweise. 8. Stellen Sie das Gert nicht in der Nhe von Wrmequellen auf. Solche Wrmequellen sind z. B. Heizkrper, Herde oder andere Wrme erzeugende Gerte (auch Verstrker). 9. Entfernen Sie in keinem Fall die Sicherheitsvorrichtung von Zweipol- oder geerdeten Steckern. Ein Zweipolstecker hat zwei unterschiedlich breite Steckkontakte. Ein geerdeter Stecker hat zwei Steckkontakte und einen dritten Erdungskontakt. Der breitere Steckkontakt oder der zustzliche Erdungskontakt dient Ihrer Sicherheit. Falls das mitgelieferte Steckerformat nicht zu Ihrer Steckdose passt, wenden Sie sich bitte an einen Elektriker, damit die Steckdose entsprechend ausgetauscht wird. 10. Verlegen Sie das Netzkabel so, dass es vor Tritten und scharfen Kanten geschtzt ist und nicht beschdigt werden kann. Achten Sie bitte insbesondere im Bereich der Stecker, Verlngerungskabel und an der Stelle, an der das Netzkabel das Gert verlsst, auf ausreichenden Schutz. 11. Das Gert muss jederzeit mit intaktem Schutzleiter an das Stromnetz angeschlossen sein. 12. Sollte der Hauptnetzstecker oder eine Gertesteckdose die Funktionseinheit zum Abschalten sein, muss diese immer zugnglich sein. 13. Verwenden Sie nur Zusatzgerte/
Zubehrteile, die laut Hersteller geeignet sind. 14. Verwenden Sie nur Wagen, Standvorrichtungen, Stative, Halter oder Tische, die vom Hersteller benannt oder im Lieferumfang des Gerts enthalten sind. Falls Sie einen Wagen benutzen, seien Sie vorsichtig beim Bewegen der Wagen- Gertkombination, um Verletzungen durch Stolpern zu vermeiden. 15. Ziehen Sie den Netzstecker bei Gewitter oder wenn Sie das Gert lngere Zeit nicht benutzen. 16. Lassen Sie alle Wartungsarbeiten nur von quali ziertem Service-Personal ausfhren. Eine Wartung ist notwendig, wenn das Gert in irgendeiner Weise beschdigt wurde (z. B. Beschdigung des Netzkabels oder Steckers), Gegenstnde oder Flssigkeit in das Gerteinnere gelangt sind, das Gert Regen oder Feuchtigkeit ausgesetzt wurde, das Gert nicht ordnungsgem funktioniert oder auf den Boden gefallen ist. 17. Korrekte Entsorgung dieses Produkts: Dieses Symbol weist darauf hin, das Produkt entsprechend der WEEE Direktive
(2012/19/EU) und der jeweiligen nationalen Gesetze nicht zusammen mit Ihren Haushaltsabfllen zu entsorgen. Dieses Produkt sollte bei einer autorisierten Sammelstelle fr Recycling elektrischer und elektronischer Gerte (EEE) abgegeben werden. Wegen bedenklicher Substanzen, Quick Start Guide 7 MUSIC Group MIDASKLARK TEKNIK TURBOSOUNDBEHRINGER BUGERA DDA MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2015 MUSIC Group music-group.com/warranty
(2012/19/EU) e a legislao nacional. Este produto dever ser levado para um centro de recolha licenciado para a reciclagem de resduos de equipamentos elctricos e electrnicos (EEE). O tratamento incorrecto deste tipo de resduos pode ter um eventual impacto negativo no ambiente e na sade humana devido a substncias potencialmente perigosas que esto geralmente associadas aos EEE. Ao mesmo tempo, a sua colaborao para a eliminao correcta deste produto ir contribuir para a utilizao e ciente dos recursos naturais. Para mais informao acerca dos locais onde poder deixar o seu equipamento usado para reciclagem, favor contactar os servios municipais locais, a entidade de gesto de resduos ou os servios de recolha de resduos domsticos. LEGAL RENUNCIANTE O MUSIC Group no se responsabiliza por perda alguma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrio, fotogra a, ou declarao aqui contidas. Dados tcnicos, aparncias e outras informaes esto sujeitas a modi caes sem aviso prvio. Todas as marcas so propriedade de seus respectivos donos. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA e DDA so marcas ou marcas registradas do MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2015 Todos direitos reservados. GARANTIA LIMITADA Para obter os termos de garantia aplicveis e condies e informaes adicionais a respeito da garantia limitada do MUSIC group, favor veri car detalhes na ntegra atravs do website music-group.com/warranty. 6 iP series Instrues de Segurana Importantes Aviso!
Terminais marcados com o smbolo carregam corrente eltrica de magnitude su ciente para constituir um risco de choque eltrico. Use apenas cabos de alto-falantes comercialmente disponveis de alta qualidade com plugues TS de "
pr-instalados. Todas as outras instalaes e modi caes devem ser efetuadas por pessoas quali cadas. Este smbolo, onde quer que o encontre, alerta-o para a leitura das instrues de manuseamento que acompanham o equipamento. Por favor leia o manual de instrues. Ateno De forma a diminuir o risco de choque elctrico, no remover a cobertura (ou a seco de trs). No existem peas substituveis por parte do utilizador no seu interior. Para esse efeito recorrer a um tcnico quali cado. Ateno Para reduzir o risco de incndios ou choques elctricos o aparelho no deve ser exposto chuva nem humidade. Alm disso, no deve ser sujeito a salpicos, nem devem ser colocados em cima do aparelho objectos contendo lquidos, tais como jarras. Ateno Estas instrues de operao devem ser utilizadas, em exclusivo, por tcnicos de assistncia quali cados. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao, salvo se possuir as quali -caes necessrias. Para evitar choques elctricos no proceda a reparaes ou intervenes, que no as indicadas nas instrues de operao. S o dever fazer se possuir as quali caes necessrias. 1. Leia estas instrues. 2. Guarde estas instrues. 3. Preste ateno a todos os avisos. 4. Siga todas as instrues. 5. No utilize este dispositivo perto de gua. 6. Limpe apenas com um pano seco. 7. No obstrua as entradas de ventilao. Instale de acordo com as instrues do fabricante. 8. No instale perto de quaisquer fontes de calor tais como radiadores, bocas de ar quente, foges de sala ou outros aparelhos (incluindo ampli cadores) que produzam calor. 9. No anule o objectivo de segurana das chas polarizadas ou do tipo de ligao terra. Uma cha polarizada dispe de duas palhetas sendo uma mais larga do que a outra. Uma cha do tipo ligao terra dispe de duas palhetas e um terceiro dente de ligao terra. A palheta larga ou o terceiro dente so fornecidos para sua segurana. Se a cha fornecida no encaixar na sua tomada, consulte um electricista para a substituio da tomada obsoleta. 10. Proteja o cabo de alimentao de pisadelas ou apertos, especialmente nas chas, extenses, e no local de sada da unidade. Certi que-se de que o cabo elctrico est protegido. Veri que particularmente nas chas, nos receptculos e no ponto em que o cabo sai do aparelho. 11. O aparelho tem de estar sempre conectado rede elctrica com o condutor de proteco intacto. 12. Se utilizar uma cha de rede principal ou uma tomada de aparelhos para desligar a unidade de funcionamento, esta deve estar sempre acessvel. 13. Utilize apenas ligaes/acessrios especi cados pelo fabricante. 14. Utilize apenas com o carrinho, estrutura, trip, suporte, ou mesa especi cados pelo fabricante ou vendidos com o dispositivo. Quando utilizar um carrinho, tenha cuidado ao mover o conjunto carrinho/dispositivo para evitar danos provocados pela terpidao. 15. Desligue este dispositivo durante as trovoadas ou quando no for utilizado durante longos perodos de tempo. 16. Qualquer tipo de reparao deve ser sempre efectuado por pessoal quali cado. necessria uma reparao sempre que a unidade tiver sido de alguma forma dani cada, como por exemplo: no caso do cabo de alimentao ou cha se encontrarem dani cados; na eventualidade de lquido ter sido derramado ou objectos terem cado para dentro do dispositivo;
no caso da unidade ter estado exposta chuva ou humidade; se esta no funcionar normalmente, ou se tiver cado. 17. Correcta eliminao deste produto: este smbolo indica que o produto no deve ser eliminado juntamente com os resduos domsticos, segundo a Directiva REEE
.
" TS 1. 2. 3. 4. 5. 6. 7. 8. 9.
() 10. 11. () 12. 13. 14. 15. 16. 17. 11. 12.
13.
14.
15.
MUSIC Group
MIDASKLARK TEKNIK TURBOSOUNDBEHRINGERBUGERA
DDAMUSIC Group IP Ltd.
MUSIC Group IP Ltd. 2015
music-group.com/warranty
16.
17. 2000
8 iP series
" TS
1. 2. 3. 4. 5. 6. 7.
8.
9.
10.
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information about this or any other TURBOSOUND product, please visit our website at turbosound.com. Quick Start Guide 9 Unpacking the Loudspeaker After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment. Controls
(2)
(3)
(4)
(7)
(1)
(6)
(5)
(8)
(9)
(1) ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
(2) LCD SCREEN displays the current DSP module and parameter settings.
(3) PROCESS button steps through the DSP processing modules.
(4) SETUP button steps through parameters within DSP processing modules.
(5) EXIT button returns to the top-level DSP screen when pressed.
(6) ENTER button saves changes and deactivates Edit mode when pressed.
(7) INPUT A/INPUT B combo jacks accept input signals using XLR, balanced " TRS or unbalanced
" TS connectors.
(8) LINK A/LINK B XLR connectors provide un-processed copies of the INPUT A or INPUT B signals.
(9) OUTPUT A/OUTPUT B offers Neutrik SpeakON compatible connections to drive additional passive speaker cabinets. 10 iP series iP DSP Menu Structure Menu Sub-Menu Fullrange Function Displays level indicators and model name. Rotate the encoder knob to adjust the output volume. Press the encoder knob to enter the main menu. Displays the following Bluetooth*
status information:
Bluetooth symbol indicates connection to audio and remote control device (iPhone, etc.) M or S below the Bluetooth symbol indicate that the speaker is linked to another iP speaker as MASTER (left channel, M) or SLAVE
(right channel, S). Rotate the encoder to change the output volume. Sets input mixer gain for analogue input A and B, as well as Bluetooth. Sets front logo illumination, LCD back panel contrast, device lock and master reset. Lets you pair the speaker with mobile Bluetooth devices and link to another iP speaker as MASTER/SLAVE. Selects from 4 preset equalisations, depending on function and music type. Main Screen Volume INPUT SETUP BT MODE POSIT.
(Position) Selects DSP compensation depending on the speaker position: stand, wall or oor. EQ INFO EXIT Allows adjustment of bass and treble control, high pass lter for use with a subwoofer, and applies phase inversion to the output, if required. Displays model and rmware information. Returns to main screen. MAIN MENU (Page 1) MAIN MENU (Page 2)
*iPhone and iPad are trademarks of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. iP Series Analogue Connection Despite their sophistication, iP speakers offer straightforward analogue connectivity, and you can easily arrange the iP system to allow simple control of levels from other devices, such as mixers. You can also daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall level from your mixers master fader. For example, you have four iP speakers and a mixer with simple left-right stereo outputs. For typical operation, set the DSP volume and input gain settings on all speakers to a at 0 dB setting. Connect the mixers left and right stereo outputs to the rst two speakers analogue INPUT A connections (the left and right mixer outputs will go to separate speakers). Then, run cables from the OUTPUT analogue connections to the remaining two speakers. In a similar way, subwoofers can also be linked to the analogue OUTPUT. Quick Start Guide 11 iP Series Bluetooth Instructions Bluetooth Connection To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad*/
iPhone*/Android*/Windows* device with basic Bluetooth connectivity. With a basic Bluetooth connection, all related iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder. For Apple iOS devices, you can also download a dedicated TURBOSOUND iP Bluetooth app from the Apple App Store. This iP Bluetooth app allows you to control a single or stereo pair of iP speakers, including all DSP functions, remotely from your iOS device (see Bluetooth Control below for more information). Bluetooth Streaming To Stream Bluetooth Audio with Any Bluetooth Device (iPad/iPhone/Android/Windows, etc.) Mono operation 1. Enable Bluetooth on your remote device. 2. Switch on your iP speaker and minimize the volume. 3. Select Pair device from the SLAVE speakers Bluetooth menu. 4. Check that your remote device is searching for a connection. 5. Once your device detects the iP speaker, select the iP speaker from your remote devices menu
(e.g., TURBOSOUND iP12). 6. Wait until the remote device shows an active connection, and then check the speakers Bluetooth menu, which should display the name of the remote device (e.g., Coolpad8150). 7. Bluetooth music can now be streamed to your iP speaker. The stereo signal will automatically mix down to mono. 8. The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen. Stereo operation 1. Complete the steps above to connect the rst speaker to Bluetooth audio. 2. The rst connected speaker automatically becomes the MASTER speaker. 3. Switch on the second speaker, which becomes the SLAVE speaker. 4. Select Link speaker from the SLAVE speakers Bluetooth menu. 12 iP series 5. The SLAVE speaker will display Slave linking... 6. Select Link speaker from the MASTER speakers Bluetooth menu. 7. The MASTER speaker will display Master Linking 8. WAIT for the speakers to link. 9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel. 10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens. NOTE: These Bluetooth speakers can only link with another speaker of the same model
(e.g., an iP 12 speaker can only be paired with another iP 12 speaker). Bluetooth Control A dedicated iOS control app for iP speakers can be downloaded from the Apple Store. In both mono and stereo mode, rst pair the MASTER speaker, and then launch the iOS control app. The iOS control app will automatically detect and adapt for mono or stereo mode. To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app. Main Page (1 speaker) Main Page (2 speakers linked) Settings/EQ Page Quick Start Guide 13 IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by quali ed personnel with the required experience and certi cation to perform the necessary tasks. Walls, oors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be safely and securely xed both to the loudspeaker and to the wall, oor or ceiling. When mounting rigging components on walls, oors or ceilings, ensure that all xings and fasteners used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular xing arrangement can be safely employed for a particular load. Cavity plugs or other specialist xings, if required, must be of an appropriate type, and must be tted and used in accordance with the makers instructions. The operation of your speaker cabinet as part of a own system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with quali ed and certi ed (by local state or national authorities) personnel prior to any installation or ying. Make sure that speaker cabinets are set up and own by quali ed and certi ed personnel only, using dedicated equipment and original parts and components delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system. Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed Service Information Sheet, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular checks must be conducted by quali ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is own, the area underneath the speaker is free of human traf c. Do not y the speaker in areas that can be entered or used by members of the public. Speakers create a magnetic eld, even if not in operation. Therefore, please keep all materials that can be affected by such elds (discs, computers, monitors, etc) at a safe distance. A safe distance is usually between 1 and 2 metres. 14 iP series Technical Speci cations Quick Start Guide 15 16 iP series Other important information Important information 1. Register online. Please register your new MUSIC Group equipment right after you purchase it by visiting turbosound. com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and ef ciently. Also, read the terms and conditions of our warranty, if applicable. 2. Malfunction. Should your MUSIC Group Authorized Reseller not be located in your vicinity, you may contact the MUSIC Group Authorized Ful ller for your country listed under Support at turbosound. com. Should your country not be listed, please check if your problem can be dealt with by our Online Support which may also be found under Support at turbosound. com. Alternatively, please submit an online warranty claim at turbosound. com BEFORE returning the product. 3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception. Quick Start Guide 17 FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION TURBOSOUND iP2000/iP1000/iP500/iP15B/iP12B Responsible Party Name: MUSIC Group Services NV Inc. Address:
5270 Procyon Street Las Vegas, NV 89118 USA
+1 702 800 8290 Phone Number:
iP2000/iP1000/iP500/iP15B/iP12B This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi cations to this equipment. Such modi cations could void the user authority to operate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This product complies with the requirements of Directive of 2014/53/EU. 18 iP series Quick Start Guide 19
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-08-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-08-06
|
||||
1 2 | Applicant's complete, legal business name |
MUSIC Tribe Manufacturing PH Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0022048235
|
||||
1 2 | Physical Address |
17A Brunswick Street Hamilton HM 10 Bermuda
|
||||
1 2 |
Hamilton, N/A 999158
|
|||||
1 2 |
Bermuda
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@cetecom.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
QWH
|
||||
1 2 | Equipment Product Code |
IP1000-2000
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
K******** X******
|
||||
1 2 | Title |
Innovation Compliance EMC
|
||||
1 2 | Telephone Number |
0760-******** Extension:
|
||||
1 2 | Fax Number |
0760-********
|
||||
1 2 |
I******@music-group.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Speakers | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output Power listed is peak conducted. The device must be installed to provide a separation distance of at least 20cm from all persons. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services (Shenzhen) Inc.
|
||||
1 2 | Name |
H****** L******
|
||||
1 2 | Telephone Number |
07552******** Extension:
|
||||
1 2 | Fax Number |
07552********
|
||||
1 2 |
s******@ccssz.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0050000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC