ULTRALINK ULM100USB High-Performance 2.4 GHz Digital Wireless Microphone with USB Receiver ULM100USB Hook-Up XENYX QX2442USB B115MP3 Laptop ULM100USB Controls Model: ULM100M Model: ULM100R
(1)
(2) (3)
(4)
(5) Type of product: Wireless Microphone POWER/STATUS LED ULM100USB Controls 1. 2. W VOLUME Button (Mute/volume down) 3. V VOLUME Button (Power on/volume up) 4. 5. Wireless Link Status LED USB connector ULM100USB Getting Started 1. 2. 3. 4. 5. 6. Press the V button to power on the ULM100M wirelessmicrophone. Connect the ULM100R wireless receiver to the wireless only USB connector on the wireless enabled device or to a USB port on a computer. The ULM100M will sync to the receiver automatically. Use the W and V buttons on the ULM100M wireless mic to adjust the volume. Press and hold the W button to mute the volume of theULM100M. Press the V button to un-mute the volume of theULM100M. Disconnect the ULM100R wireless receiver. The ULM100M wireless microphone will power off when no wireless signal is detected for more than 1 minute. Specification RF output Working range Dynamic range Frequency response
(Wireless Link) THD+N (%) (Wireless Link) Sampling rate Audio coding RF channel Latency Power supply current
(Microphone) Power supply current
(USB receiver) Dimensions (W x D x H) Weight
+17 dBm (50 mW) 120 m Maximum
(Lineof Sight)
> 67 dB 20 Hz 14.7 kHz
(+0 / -0.3 dB)
> 65 dB (0.03%) 31.25 kHz Pulse-coded modulation (PCM) 2.4 GHz ISM Band
(2417 - 2471 MHz), 19Channels 9 ms 160 mA @ +2.7 VDC, 140 mA @ +3.0 VDC 100 mA @ +5 VDC 1.8 x 1.8 x 9.6"
45 x 45 x 245 mm 0.4 lbs / 0.2 kg FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION ULTRALINK ULM100USB Responsible Party Name: MUSIC Group Services Address:
Phone/Fax No.:
US Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA98011, USA Phone: +1 425 672 0816 Fax: +1 425 673 7647 ULTRALINK ULM100USB complies with the FCC rules as mentioned in the followingparagraph:
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment andreceiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician forhelp This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesiredoperation. Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment. Operation in the 2.4 GHz ISM (Industrial, Scientific, Medical) frequency band may be subject to interference from other transmitting equipment operating in this band. Inthe event of such interference, please verify and reassign the transmitting channels of any potentially interfering transmittingequipment. LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARKTEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSICGROUP
(MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THISMANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. 2013 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding MUSIC Groups Limited Warranty, please see complete details online at www.music-group.com/warranty. For USB Receiver:
This equipment meets the government's requirements for exposure to radio waves. For body worn operation, this equipment has been tested and meets the FCC RF exposure guidelines. The highest SAR value for this USB Receiver as reported to the FCC when tested for use at the Body-worn is 0.071 W/kg. This equipment complies with the European Council Recommendation of 12 July 1999 on the Limitation of Exposure of the General Public to Electromagnetic Fields
[1999/519/EC]. For Microphone:
This equipment should be installed and operated with a minimum distance of 15mm between the radiator and your head.