ULM200USB/ULM202USB Controls Model: ULM200M Model: ULM200D
(1)
(4)
(5)
(2) (3) Type of product: Wireless Microphone POWER/STATUS LED ULM200USB/ULM202USB Controls 1. 2. VOLUME Button (Mute/volume down) 3. VOLUME Button (Power on/unmute/volume up) 4. 5. Wireless Link Status LED USB connector ULM200USB/ULM202USB Getting Started 1. 2. 3. 4. 5. 6. 7. 8. Connect the ULM200D wireless receiver to the WIRELESS ONLY! USB connector on wireless-enabled BEHRIINGER mixers, powered speakers or other compatible products, or to a USB port on a computer. Press and hold the button on the ULM200M wireless microphone to connect wirelessly to the ULM200D receiver. The LED on the microphone will fl ash slowly during the connecting sequence and will light solid once connected. If the ULM200M wireless microphone cannot connect to a receiver, the microphone will automatically power down after 10 seconds. Once connected, the ULM200M microphone will be set at a medium volume. Use the and buttons to adjust the volume A long press of the button will put the ULM200M microphone into mute. The mute condition is indicated by rapid fl ashing of the LED. If the user does not unmute within 60 seconds, the ULM200M microphone will power down to save battery life. A short press of the button will unmute the ULM200M microphone. If the ULM200M microphone is unmuted more than 10 seconds after muting, it will return to the previous volume level, if unmuted after less than 10 seconds it will be set to the minimum volume level. Unplug the ULM200D wireless receiver to power down. The ULM200M wireless microphone will power down 10 seconds after the ULM200D wireless receiver is unplugged. The LED in the ULM200M wireless microphone will indicate when the battery is low by regular brief fl ashes. Should the ULM200M wireless microphone become unpaired with the ULM200D wireless receiver, the microphone can be re-paired from the powered down state by simultaneously pressing the and buttons and moving the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver. The LED on the microphone will fl ash slowly during the pairing sequence and will light solid once connected. If the ULM200M wireless microphone cannot pair to the receiver it will automatically power down after 10 seconds. Specifi cation RF output Operating range Dynamic range Equivalent input noise Frequency Response
(Wireless Link) Sampling rate Resolution Encoding Latency RF frequency Power Supply current Battery type Battery life Dimensions (W x D x H) Weight
<100 mW / +20 dBm 120 m (Line of Sight)*
92 dB, A-weighted**
-112 dBu 20 Hz - 20 kHz, 1 dB 48 kHz 24-bit 232 kbps SLAC (Slightly Lossy Audio Codec) 14.5 ms 2.4 GHz ISM band
(2406 MHz - 2474 MHz), 18 channels 70 mA @ +5 VDC 2 x AA (LR6) Alkaline cells
>30 hours 45.7 x 45.7 x 243.8 mm
(1.8 x 1.8 x 9.6") 0.4 kg (0.9 lbs)
*Achievable range will be dependent on nearby sources of RF interference and/
or line of sight obstacles.
**Measured from analog input to analog output, unity gain operation without wireless compression. ULM200USB/ULM202USB Controles Model: ULM200M Model: ULM200D
(1)
(4)
(5)
(2) (3) Tipo de producto: Micrfono inalmbrico ULM200USB/ULM202USB Controles Piloto de encendido/estado POWER/STATUS 1. Botn VOLUME (anulacin/reduccin de volumen) 2. Botn VOLUME (Encendido/aumento de volumen) 3. Conector USB 4. 5. Piloto de estado de enlace inalmbrico 3. 4. 2. ULM200USB/ULM202USB Puesta en marcha Connect the ULM200D wireless receiver to the WIRELESS 1. ONLY! USB connector on wireless-enabled BEHRIINGER mixers, powered speakers or other compatible products, or to a USB port on a computer. Press and hold the button on the ULM200M wireless microphone to connect wirelessly to the ULM200D receiver. The LED on the microphone will fl ash slowly during the connecting sequence and will light solid once connected. If the ULM200M wireless microphone cannot connect to a receiver, the microphone will automatically power down after 10 seconds. Once connected, the ULM200M microphone will be set at a medium volume. Use the and buttons to adjust the volume A long press of the button will put the ULM200M microphone into mute. The mute condition is indicated by rapid fl ashing of the LED. If the user does not unmute within 60 seconds, the ULM200M microphone will power down to save battery life. A short press of the button will unmute the ULM200M microphone. If the ULM200M microphone is unmuted more than 10 seconds after muting, it will return to the previous volume level, if unmuted after less than 10 seconds it will be set to the minimum volume level. Unplug the ULM200D wireless receiver to power down. The ULM200M wireless microphone will power down 10 seconds after the ULM200D wireless receiver is unplugged. The LED in the ULM200M wireless microphone will indicate when the battery is low by regular brief fl ashes. Should the ULM200M wireless microphone become unpaired with the ULM200D wireless receiver, the microphone can be re-paired from the powered down state by simultaneously pressing the and buttons and moving the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver. The LED on the microphone will fl ash slowly during the pairing sequence and will light solid once connected. If the ULM200M wireless microphone cannot pair to the receiver it will automatically power down after 10 seconds. 8. 6. 5. 7. ULM200USB/ULM202USB Rglages Model: ULM200M Model: ULM200D
(1)
(4)
(5)
(2) (3) Type de produit : micro sans fil ULM200USB/ULM202USB Rglages 1. 2. 3. Tmoin Led dTAT/ALIMENTATION Bouton VOLUME (couper/diminuer le volume) Bouton VOLUME (mise sous tension/augmenter levolume) Connecteur USB Tmoin Led dtat de la liaison sans fi l 4. 5. ULM200USB/ULM202USB Mise en uvre 1. 2. 3. 4. 5. 6. 7. 8. Connect the ULM200D wireless receiver to the WIRELESS ONLY! USB connector on wireless-enabled BEHRIINGER mixers, powered speakers or other compatible products, or to a USB port on a computer. Press and hold the button on the ULM200M wireless microphone to connect wirelessly to the ULM200D receiver. The LED on the microphone will fl ash slowly during the connecting sequence and will light solid once connected. If the ULM200M wireless microphone cannot connect to a receiver, the microphone will automatically power down after 10 seconds. Once connected, the ULM200M microphone will be set at a medium volume. Use the and buttons to adjust the volume A long press of the button will put the ULM200M microphone into mute. The mute condition is indicated by rapid fl ashing of the LED. If the user does not unmute within 60 seconds, the ULM200M microphone will power down to save battery life. A short press of the button will unmute the ULM200M microphone. If the ULM200M microphone is unmuted more than 10 seconds after muting, it will return to the previous volume level, if unmuted after less than 10 seconds it will be set to the minimum volume level. Unplug the ULM200D wireless receiver to power down. The ULM200M wireless microphone will power down 10 seconds after the ULM200D wireless receiver is unplugged. The LED in the ULM200M wireless microphone will indicate when the battery is low by regular brief fl ashes. Should the ULM200M wireless microphone become unpaired with the ULM200D wireless receiver, the microphone can be re-paired from the powered down state by simultaneously pressing the and buttons and moving the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver. The LED on the microphone will fl ash slowly during the pairing sequence and will light solid once connected. If the ULM200M wireless microphone cannot pair to the receiver it will automatically power down after 10 seconds. ULM200USB/ULM202USB Regler Model: ULM200M Model: ULM200D
(1)
(4)
(5)
(2) (3) Produkttyp: Drahtlosmikrofon BETRIEB/STATUS-LED ULM200USB/ULM202USB Regler 1. 2. VOLUME-Taste (stummschalten/leiser) 3. VOLUME-Taste (einschalten/lauter) 4. 5. Wireless Link Status-LED USB-Anschluss ULM200USB/ULM202USB Erste Schritte 1. 2. 3. 4. 5. 6. 7. 8. Connect the ULM200D wireless receiver to the WIRELESS ONLY! USB connector on wireless-enabled BEHRIINGER mixers, powered speakers or other compatible products, or to a USB port on a computer. Press and hold the button on the ULM200M wireless microphone to connect wirelessly to the ULM200D receiver. The LED on the microphone will fl ash slowly during the connecting sequence and will light solid once connected. If the ULM200M wireless microphone cannot connect to a receiver, the microphone will automatically power down after 10 seconds. Once connected, the ULM200M microphone will be set at a medium volume. Use the and buttons to adjust the volume A long press of the button will put the ULM200M microphone into mute. The mute condition is indicated by rapid fl ashing of the LED. If the user does not unmute within 60 seconds, the ULM200M microphone will power down to save battery life. A short press of the button will unmute the ULM200M microphone. If the ULM200M microphone is unmuted more than 10 seconds after muting, it will return to the previous volume level, if unmuted after less than 10 seconds it will be set to the minimum volume level. Unplug the ULM200D wireless receiver to power down. The ULM200M wireless microphone will power down 10 seconds after the ULM200D wireless receiver is unplugged. The LED in the ULM200M wireless microphone will indicate when the battery is low by regular brief fl ashes. Should the ULM200M wireless microphone become unpaired with the ULM200D wireless receiver, the microphone can be re-paired from the powered down state by simultaneously pressing the and buttons and moving the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver. The LED on the microphone will fl ash slowly during the pairing sequence and will light solid once connected. If the ULM200M wireless microphone cannot pair to the receiver it will automatically power down after 10 seconds. ULM200USB/ULM202USB Controles Model: ULM200M Model: ULM200D
(1)
(4)
(5)
(2) (3) Tipo do produto: Microfone sem fio ULM200USB/ULM202USB Controles 1. 2. 3. 4. 5. LED POWER/STATUS Boto de VOLUME (Mute/abaixa o volume) Boto de VOLUME (Power on/aumenta o volume) Conector USB LED Status de Link Wireless (sem fi o) 3. 4. 2. Primeiros Passos ULM200USB/ULM202USB Connect the ULM200D wireless receiver to the WIRELESS 1. ONLY! USB connector on wireless-enabled BEHRIINGER mixers, powered speakers or other compatible products, or to a USB port on a computer. Press and hold the button on the ULM200M wireless microphone to connect wirelessly to the ULM200D receiver. The LED on the microphone will fl ash slowly during the connecting sequence and will light solid once connected. If the ULM200M wireless microphone cannot connect to a receiver, the microphone will automatically power down after 10 seconds. Once connected, the ULM200M microphone will be set at a medium volume. Use the and buttons to adjust the volume A long press of the button will put the ULM200M microphone into mute. The mute condition is indicated by rapid fl ashing of the LED. If the user does not unmute within 60 seconds, the ULM200M microphone will power down to save battery life. A short press of the button will unmute the ULM200M microphone. If the ULM200M microphone is unmuted more than 10 seconds after muting, it will return to the previous volume level, if unmuted after less than 10 seconds it will be set to the minimum volume level. Unplug the ULM200D wireless receiver to power down. The ULM200M wireless microphone will power down 10 seconds after the ULM200D wireless receiver is unplugged. The LED in the ULM200M wireless microphone will indicate when the battery is low by regular brief fl ashes. Should the ULM200M wireless microphone become unpaired with the ULM200D wireless receiver, the microphone can be re-paired from the powered down state by simultaneously pressing the and buttons and moving the microphone to within 10 cm (4 inches) of the ULM200D wireless receiver. The LED on the microphone will fl ash slowly during the pairing sequence and will light solid once connected. If the ULM200M wireless microphone cannot pair to the receiver it will automatically power down after 10 seconds. 8. 6. 5. 7. LEGAL DISCLAIMER MUSIC Group accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2014 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding MUSIC Groups Limited Warranty, please see complete details online at music-group.com/warranty. NEGACIN LEGAL MUSIC Group no admite ningn tipo de responsabilidad por cualquier dao o prdida que pudiera sufrir cualquier persona por confi ar total o parcialmente en la descripciones, fotografas o afi rmaciones contenidas en este documento. Las especifi caciones tcnicas, imgenes y otras informaciones contenidas en este documento estn sujetas a modifi caciones sin previo aviso. Todas las marcas comerciales que aparecen aqu son propiedad de sus respectivos dueos. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA y DDA son marcas comerciales o marcas registradas de MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2014 Reservados todos los derechos. GARANTA LIMITADA Si quiere conocer los detalles y condiciones aplicables de la garanta as como informacin adicional sobre la Garanta limitada de MUSIC group, consulte online toda la informacin en la web music-group.com/warranty. DNI LGAL MUSIC Group ne peut tre tenu pour responsable pour toute perte pouvant tre subie par toute personne se fi ant en partie ou en totalit toute description, photographie ou affi rmation contenue dans ce document. Les caractristiques, lapparence et dautres informations peuvent faire lobjet de modifi cations sans notifi cation. Toutes les marques appartiennent leurs propritaires respectifs. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA et DDA sont des marques ou marques dposes de MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2014 Tous droits rservs. GARANTIE LIMITE Pour connatre les termes et conditions de garantie applicables, ainsi que les informations supplmentaires et dtailles sur la Garantie Limite de MUSIC Group, consultez le site Internet music-group.com/warranty. HAFTUNGSAUSSCHLUSS MUSIC Group bernimmt keine Haftung fr Verluste, die Personen entstanden sind, die sich ganz oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen knnen ohne vorherige Ankndigung gendert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA und DDA sind Warenzeichen oder eingetragene Warenzeichen der MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2014 Alle Rechte vorbehalten. BESCHRNKTE GARANTIE Die geltenden Garantiebedingungen und zustzliche Informationen bezglich der von MUSIC Group gewhrten beschrnkten Garantie fi nden Sie online unter music-group.com/warranty. LEGAL RENUNCIANTE O MUSIC Group no se responsabiliza por perda alguma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrio, fotografi a, ou declarao aqui contidas. Dados tcnicos, aparncias e outras informaes esto sujeitas a modifi caes sem aviso prvio. Todas as marcas so propriedade de seus respectivos donos. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA e DDA so marcas ou marcas registradas do MUSIC Group IP Ltd. MUSIC Group IP Ltd. 2014 Todos direitos reservados. GARANTIA LIMITADA Para obter os termos de garantia aplicveis e condies e informaes adicionais a respeito da garantia limitada do MUSIC group, favor verifi car detalhes na ntegra atravs do website music-group.com/warranty. FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION ULTRALINK ULM200USB/ULM202USB Responsible Party Name: MUSIC Group Services Address:
Phone Number:
NV Inc. 5270 Procyon Street Las Vegas, NV 89118 USA
+1 702 800 8290 ULTRALINK ULM200USB/ULM202USB complies with the FCC rules as mentioned in the followingparagraph:
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician forhelp This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Important information:
Changes or modifi cations to the equipment not expressly approved by MUSIC Group can void the users authority to use the equipment. Operation in the 2.4 GHz ISM (Industrial, Scientifi c, Medical) frequency band may be subject to interference from other transmitting equipment operating in this band. In the event of such interference, please verify and reassign the transmitting channels of any potentially interfering transmitting equipment. We Hear You