FCC ID: PY320200500 Meural Canvas

Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez accder ce document en franais canadien https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. For NETGEARs Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEARs Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period. See the regulatory compliance document before connecting the power supply. Package content wall mount wall anchor and screw (x2) power supply NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR INTERNATIONAL LTD Floor 1, Building 3 University Technology Centre Curraheen Road, Cork, T12EF21, Ireland Lets get started May 13, 2020 Meural makes it easy to seamlessly share from phone to frame. Youll have your frame connected to WiFi and ready to invite family and friends to share photos in a few simple steps!

1. Fold out the support leg. You can place it landscape or portrait. NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. 2. Connect the power supply 3. Download the Meural app 4. Create an account or log in. 5. Follow the instructions in the app.

(optional) Visit http://fkdfdkfk for directions to mount your canvas on the wall. Do more Scroll through your art Use the Meural app to:

Add photos Share from anywhere Discover art Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement:

This device complies with ISED's licence-exempt RSSs. Operation is subject to the This device complies with RSS-247 of the Industry Canada Rules. Operation is following two conditions: (1) This device may not cause harmful interference, and subject to the following two conditions: (1) This device may not cause

(2) this device must accept any interference received, including interference that harmful interference, and (2) this device must accept any interference may cause undesired operation. received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d' ISED applicables aux appareils radio Ce dispositif est conforme la norme CNR-247d'Industrie Canada applicable exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

aux appareils radio exempts de licence. Son fonctionnement est sujet aux

(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage doit accepter tout brouillage reu, y compris un brouillage susceptible de prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y provoquer un fonctionnement indsirable. compris un brouillage susceptible de provoquer un fonctionnement Caution :

indsirable.

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to Caution :

reduce the potential for harmful interference to co-channel mobile satellite

(i) the device for operation in the band 5150-5250 MHz is only for indoor use systems;

to reduce the potential for harmful interference to co-channel mobile

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 satellite systems;

MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

(ii) high-power radars are allocated as primary users (i.e. priority users) of

(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could shall be such that the equipment still complies with the e.i.r.p. limits specified for cause interference and/or damage to LE-LAN devices. point-to-point and non-point-to-point operation as appropriate; and Avertissement:

(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated. uniquement pour une utilisation lintrieur afin de rduire les risques de

(v) Users should also be advised that high-power radars are allocated as primary brouillage prjudiciable aux systmes de satellites mobiles utilisant les users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and mmes canaux;

that these radars could cause interference and/or damage to LE-LAN devices.

(ii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de Avertissement:

radars de haute puissance sont dsigns utilisateurs principaux (c.--d., Le guide d'utilisation des dispositifs pour rseaux locaux doit inclure des quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et instructions prcises sur les restrictions susmentionnes, notamment :

que ces radars pourraient causer du brouillage et/ou des dommages aux

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs dispositifs LAN-EL. uniquement pour une utilisation l'intrieur afin de rduire les risques de Radiation Exposure Statement:

brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

This equipment complies with IC radiation exposure limits set forth for an

(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de uncontrolled environment. This equipment should be installed and operated 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i. with minimum distance 20cm between the radiator & your body. r.e;

(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 Dclaration d'exposition aux radiations:

725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour Cet quipement est conforme aux limites d'exposition aux rayonnements IC l'exploitation point point et l'exploitation non point point, selon le cas;

tablies pour un environnement non contrl. Cet quipement doit tre

(iv) les pires angles d'inclinaison ncessaires pour rester conforme l'exigence de install et utilis avec un minimum de 20 cm de distance entre la source de la p.i.r.e. applicable au masque d'lvation, et nonce la section 6.2.2 3), rayonnement et votre corps. doivent tre clairement indiqus.

(v) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. RadiationExposureStatement:

ThisequipmentcomplieswithISEDradiationexposurelimitssetforthfor an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclarationd'expositionauxradiations:

Cetquipementestconformeauxlimitesd'expositionauxrayonnements ISEDtabliespourunenvironnementnoncontrl.Cetquipementdoit tre install et utilis avec un minimum de 20 cm de distance entre la sourcederayonnementetvotrecorps.

FCC / IC LABEL LOCATION FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. EUT Back EUT Lack Label

(Fig. 1) FCC ID: PY320200500 FCC ID: PY320200500 IC: 4054A-20200500

REV 01 DESCRIPTION OF REVISION DOCUMENT RELEASE ENG APPD DATE R HU 23MAR2020 NOTE:

1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. SN, MAC TO BE PRINTED AT ODM 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 7 Pantone Black Pantone Cool grey 11C Pantone Cool grey 8C AUTHOR:

SHEET:

R HU 1 of 1 TITLE:

AW,MC315, PA NA, PLBL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. P/N:

AW-14620-01 REV:

01

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 P O W E R O F A T T O R N E Y Date: 2020/05/19 FCC ID: PY320200500 To whom it may concern:

We, the undersigned, hereby authorize Debby Lin of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please dont hesitate to Contact us. Thank you!

Sincerely yours,

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Date: 2020/05/19 FCC ID: PY320200500 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Schematics Block Diagram Operational Description Software Operational Description application. Sincerely yours,

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: May 20, 2020 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: PY320200500 Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos Users manual Internal Photos Sincerely yours,

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2020/05/17 G E N E R A L D E C L A R A T I O N We, NETGEAR, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: PY320200500 If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com