FCC ID: RA30009260233 Network Extender

puabe| siy} epnjoul jeys Pue UeAS|y Woy BUM ul UOISssiUUed salinbey eyep siyj} Jo UolLod Aue jo uolyeoldng N3A14 puke jwsidioss ay} ueemjeq yoejuoo Aq payloads se ydeoxe esodund Jayjo Aue 10} pasn Jo pasojosip aq jou |jeus pue Ajuo sesodind uolyen|eae Jo} soUaepyjUod Ul peysiuin}

S| }[ (U@Ae[q) OU] BuLeeulBug Uueae|y yo Apedoid eu; Ss! Bumeip Siu, SALON AUWLIIddOUd Cc pnyin. F fran FO. vay... OMAN Old3a9 3a39 qUaIO UOCLUNN yOolOdq AWN Jol r fe" Wesul jenuew root F oorg &

OLLIE | 9B0S UOISIAOY yequuNN Buyweiq rereocoo ! L/L ' pesul jenuew o1eq UOCLUNN JeeUS . E 5

& 9 a e

S rr WOdBULI@aUIBUQUSAS|F MMM 9002'S7(08Z) *4 1199S7r(08Z) Lb 9d0 [_Lepeues eaJeqjyuo}UoWIpy 006 23INs 382.35 001-05101 pezeiodiosu| Suy.i00uj3uq USAG/y igital device, mits are ainst harmful sted and Juipment cy energy ith the

> radio tee that lation. If this radio or by turning Jed to try to following yment and

| circuit connected. YTV ations not

, or compliance

>quipment.

) BU} ByB19dlO 0} AWOYINE $,J9SN BU} PIOA Pjnod 4} aIqisuodsey Aued au} Aq peacudde A\ssoudxe JIPOLU 4O SeBueYO Aue yeu} PSUOINeD aue NO, suled JOPUSHG JON SSISAA B1d]NW US9MJOq SPEIUDEYIP O} sesn Buluued JO} S| JOQUINU SIUL "HUN YOee JO WO}Oq djay 40} UeIOIUYyde} BU} UO PSTedo] JOQUINN Buyjey W6Ip--

IDI PeduaJadxe UB JO Ja/eap BU} WNSUODH- =| B SEY JONPOud JaPUdPG ION SSO[SIAA SUL S| JOAIGOOI OY} YOIUM O} YEU} WOd} JUSIOJIP 2 UO }8/}NO UB OjU! JUBLUCINDS aU} JOSULOD - 0 0 L L JOAIOOI sJaquny Bune Jinbe au} Udemjeq UOITeuedas 8u} aSessDU| -

BUUDIUL HUIASOa1 BU} B}EIOJAI JO JUSLOSY - yenuey] 48S Su} Ul PoUOHUsW Se saunsea | ssojdepe Ww OE Od A 0? OM} aU} JOU BY} JO GAOL JO BUO Aq sQUBIEPSIU! 84} 9909} WU OOF JO LUNWIUILU aU) UUM Suojdepe eINODUA SI JASN BU} UO PUB YO jUaWdINbs au; ) Jamod jem OG A 0'9 OMI YIM paddinbe PAUILUAIEP aq UBD YOIUM UO!dedeU UOISIAR|O} SI JONPOd JBPUSIXY ION SSSUIAA SUL O} SOUBISP9IU! [NYLUeY asneo seop juewdinbe

[EISUI JEINDIWed & Ul NDDO JOU JIM BoUaaLJaIU! VWwoor Od AQ UesenB OU S| dU} WAAQMOL SUONESIUNLULUOD | 0} OV AOGI 1} BOUAIOJJOIUI |NJUUeU asneo ABW sUOIONUISU! :

M QOURPJONIE UI PASN PUL Pa|[eIsu! JOU II pue uanbey Olpes ayeipes UeS pue sasn sereiaueb 9 SIUL UONE|/EISU! [eUEPISeU BU! <OUGELJEIUI VWOOP AY 9} VUODE Ar HE Ud!]N9}01d ajqeuoseal apiAoid 0} paubisap wou) papei6dn usaq I| SSOUL S9INY OOJ BY} JO GL Wed O} yUeNsund 0 G SSEID & JO} STIL] AYI YA A|LWUOD } PUNO}

9} uaaq sey juawudinbe siuL :AJOSIADY 994 JVILON

TE O M E R BASE Thank you for purchasing NYKO's Wireless Net Extender -- the "Invisible Ethernet Cable". This unique product provides a wireless replacement for long Ethernet cables, at a fraction of the cost of current wireless network equipment. The Base Unit and the Remote Unit are factory matched to one another. They will not connect or interfere with another Wireless Net Extender set, nor with any other wireless product. Though this product is designed for wireless online gaming with PlayStation2 and Xbox, this 10Base-T system can also be used with computers, printers, and any other Ethernet enabled devices. The Base and Remote Units have a range of up to 100 feet (30 m) and can transmit through most walls, roofs, and floors. Therefore, no costly network wiring installations are required. The Wireless Net Extender offers the ultimate in true Plug-n-Play -- just plug in the power and Ethernet cable and it's GAME ON -- no drivers, no software and no configuration. NYKO and WIRELESS NET EXTENDER are trademarks of NYKO Technologies, Inc. PlayStation2 is a registered trademark of Sony Computer Entertainment Inc. Xbox is a trademark of Microsoft Corporation. This is a NYKO product and is not endorsed, manufactured or distributed by the companies listed above. Contents B A S E x2 Power Supply 120V AC to 4V DC Transformer Base Unit R E M O T E x2 Ethernet Cable 6.5 ft (2 m) RJ45 1 - Base Unit (1 slider switch + 2 Remote Unit Ethernet ports) 1 - Remote Unit (1 Ethernet port) 2 - Wall Power Adaptors (120V AC 60Hz 7W to 4V DC 300mA) 2 - Ethernet Cables 6.5 feet (2m), RJ45 1 - Instruction Manual Features:

Connects to high-speed internet without cables

No programming or setup -- factory configured -- plug in and play

Secure encrypted communication with factory matched pairs

Use multiple sets within the same area

Can be used for connecting most any Ethernet product: printers, scanners, laptops, game consoles, PCs, etc. up to 100 feet 1.5 Mbps, low latency RF wireless link. Can also be used with hubs, switches or routers. Definitions:

Game Console: Any Ethernet enabled gaming device such as PlayStation2 or Xbox. Network Device: Any Ethernet enabled device. Examples include: Game Consoles, PCs, laptops, printers and scanners. System Requirements:

The user must have a DSL or Cable Modem with an active account.

This product is designed for Ethernet enabled PlayStation2 or Xbox game consoles; it can also be used with computers, network printers and other Network Devices.

The model numbers of Ethernet Adaptors for the current Game Consoles are as follows:

- PlayStation2: Network Adaptor - Model # SCPH-10281

- Xbox: Ethernet built in Quick Start Guide STEP 1. Pre-installation Network Device Personal Computer, Video Game Console, Etc. Test:

Test your wired Ethernet connection by using your computer to access the Internet via a DSL or Cable Modem. For example, go to www.nyko.com to confirm connection. (Note:

Dial-up connections using a 28K or 56K modem are not Ethernet connections.) Test your wired Ethernet connection by using your game console to access the Internet. Play one online game to confirm connection. or Note: You can use the Ethernet cables supplied with the Wireless Net Extender, or your current standard Ethernet cables. Test the current network configuration using standard Ethernet cables. Quick Start Guide Network Device Personal Computer, Video Game Console, Etc. STEP 1 DSL or Cable Modem or DSL or Cable Modem STEP 2 Network Device Personal Computer, Video Game Console, Etc. Network Device Game Console or PC or any other Ethernet enabled device COMPUTER GAME CONSOLE Remote Unit STEP 2: Setup for Wireless/Remote Switch Position Connection 1. Turn off the Network Device (Game Console, computer, printer, or any other device). 2. Turn off or unplug the DSL/Cable Modem. 3. Plug in all devices as shown in this illustration. All power adaptors MUST plug into a 120 VAC, 60 Hz source. 4. The Ethernet Cable from your DSL or Cable Modem MUST plug into the left Ethernet port on the Base Unit. 5. Ensure that the Slider Switch on the Base Unit is set to the GAME CONSOLE position. 1 6. Power up the DSL/Cable Modem -- then power up the Network Device. 7. GAME ON. Setup is complete. Base Unit DSL or Cable Modem 2

OPTIONAL R E M O T E Simple Wireless Setup OPTIONAL Multiple Net Extenders Power Adaptor TE O M E R Remote Unit OTHER CONFIGURATIONS:

The best way to understand NYKO's "Wireless Net Extender" is to view it as an "Invisible Ethernet Cable". Refer to the Simple Wireless Setup, "Multiple Netwrok Devices: Sharing a Net Extender" and

"Multiple Net Extenders" illustrations for additional ways the Wireless Net Extender can be used. Of course this product can be used in other ways not shown -- the Wireless Net Extender can replace the Ethernet cable in any 10Base-T application. Network Device Network Device TE O M E R Remote Unit (2) REM OTE Remote Unit (3) Network Device Personal Computer, Video Game Console, Etc. Base Unit B A S E Network Device B A S E B A S E Base Unit (3) Switch set to GAME CONSOLE position Base Unit (2) B A S E TE O M E R Power Adaptor DSL or Cable Modem OPTIONAL Network Devices Multiple Network Devices:

Sharing a Net Extender Remote Unit (1) Base Unit (1) NOTE: Power Adaptors and Base Unit Slide Switch close-ups removed for clarity. Slide switches set to Game Console Mode. Slide Switch Game Console Mode 10 Base-T Computer Mode 10/100 Base-T Hub/Router*

TE O M E R Remote Unit Base Unit B A S E Network Devices Personal Computer, Video Game Console, Etc. The Slide Switch on the Base Unit selects either of two modes GAME CONSOLE Mode or COMPUTER Mode. The GAME CONSOLE Mode is the default position for gaming on the net. This enables the wireless Ethernet link between the game console and the DSL/Cable Modem. The right Ethernet cable is disabled. The COMPUTER Mode turns off the wireless function and directly connects the left and right cables. This hardwires your computer, for example, to the DSL/Cable Modem (see Step 2 illustration) LED Indicator TE O M E R Hub/

Router DSL or Cable Modem Regulatory Compliance:

FCC Part 15, Industry Canada RSS-210, and cULus Troubleshooting Are you having connection problems -- what is the LED doing?

No Light: The Wireless Net Extender unit is not getting power. Check the units power connections. Blinking Light (1/2 second on; 1/2 second off) does not turn to solid or flickering:

The other Wireless Net Extender unit is not getting power. The Net Extender(s) are experiencing too much interference from another device or the two Net Extenders are too far apart in the current surroundings. Reorient each unit to face in the general direction of the other unit (through wall, floor, etc) or change the location of the two Net Extenders (avoid placing the Net Extenders close to large metal surfaces or objects, such as metal tables or metal support pillars). Solid Light but still no link: The Ethernet cable is not plugged into one (or both) of the Wireless Net Extender units or other Network Devices. Flickering Light, however the network connection is not working:

(Do the following until the problem is solved.) 1. Unplug the power to both Wireless Net Extenders for at least 5 seconds, then power up the two Net Extenders again. 2. Turn off or unplug the power to the ADSL/Cable Modem for at least 30 seconds, then power up the ADSL/Cable Modem -- the Network Device (game console, computer, etc) may need to be rebooted, too. This usually fixes most Internet related issues. 3. If you have a computer connected to the Base Unit, put the Slide Switch into Computer Mode. Try to access the Internet from the computer. If unsuccessful, you may need to reset your IP address. Refer to the instructions from your Internet Service Provider. Still no success?

Replace the Wireless Net Extender with an Ethernet Cable to isolate the problem. If the Ethernet Cable works but the "Wireless Net Extender" does not:

- go to: http://www.nyko.com/faqs.htm

- or write: support@nyko.com

*Wireless Data Rate will be lower in this case. Hub/Router DSL or Cable Modem 3 No Light: No power. Blinking Light (1/2 second on; 1/2 second off): Searching for the other Wireless Net Extender unit. Solid Light: Solid link established; no data flow. Flickering Light: The Ethernet connection is active (the faster the flicker, the faster the data flow). NYKO Product Limited Warranty This NYKO product is warranted to the original purchaser for the normal intended use for a period of ninety (90) days from the date of purchase. If a defect covered under this warranty occurs, NYKO will replace or repair the product or its defective parts, at its option, at no charge. Warranty does not apply to defects resulting from modification or misuse of this product. The product can be returned to the place of purchase accompanied with proof of purchase or shipped to: NYKO Technologies, Inc., P.O. Box 46697, Los Angeles, CA 90046 with freight charges prepaid. Please allow 3-4 weeks for processing. 4