Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A
/Product appearance chart Date:
Author:
2015.12.17 Willie Version 1 1 14 Page 1 of 14
/Product dimension chart 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A
/Product operation description 3.1 /Product function description 1 4.0 Bluetooth 4.0 technology of low power consumption;
2 Easy and convenient to install;
Date:
Author:
2015.12.17 Willie Version 1 2 14 Page 2 of 14 3 APP Can be controlled by APP after the Bluetooth control box connects with the control box. 3.2 /Product specification 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 3 14 Page 3 of 14 If you do not connect the Bluetooth, there will be Bluetooth selection box above when press the buttons; After selecting and choosing the Bluetooth, the massage box will disappear;
2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 4 14 Page 4 of 14 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 5 14 Page 5 of 14 1/head up2/foot up3/go up simultaneously4
/head down5/foot down 6/go down simultaneously7ZERO_G /ZERO_G position8FLAT
/FLAT position9ANTI SNORE /ANTI SNORE position A/memory position A B/under bed light C/memory position B 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 6 14 Page 6 of 14 1/turn on massage2/turn off massage 3/massage mode selection4/massage strength selection5/massage time selection 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 7 14 Page 7 of 14 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 8 14 Page 8 of 14 1/ alarm clock on and off2/time selection of alarm clock3
/ringtone selection of alarm clock;
4 A/Arrive to memory position A when reach to the time of alarm clock; 5 B/Arrive to memory position B when reach to the time of alarm clock6/Turn on massage when reach to the time of alarm clock 7/ When the alarm clock is turned on, check the time of the control box and set the alarm clock. When the alarm clock is turned off, only check the time of the alarm clock. 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 9 14 Page 9 of 14 Interface of Bluetooth selection, can switch the connected Bluetooth 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 10 14 Page 10 of 14
/Main requirements for product performance parameters Range of input voltage Input 29VDC 1.8A Output Environment Work temperature Storage temperature Others Input current RF RF frequency range RF RF modulation mode RF RF transmission power Protection level Flame retardant rating 2.379~2.496GHz GFSK 0dB Indoor use
-2055
-4085 IP20 94V-0
/Product connection diagram 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 11 14 Page 11 of 14
/Range of application 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A
/Warnings FCC:
Date:
Author:
2015.12.17 Willie Version 1 12 14 Page 12 of 14 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: / FCC 15
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC 15 B Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
- /
2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 13 14 Page 13 of 14 This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. / FCC This equipment should be installed and operated with a minimum distance of 5 mm between the device and the user or bystanders. / 5 mm This device must not be co-located or operating in conjunction with any other antenna or transmitter./
IC:
This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: / RSS
(1) This device may not cause interference; and
;
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
CNR
(1) l'appareil ne doit pas produire de brouillage;
;
(2)l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with radio frequency exposure limits set forth by the Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the device and the user or bystanders. 5 mm This device must not be co-located or operating in conjunction with any other antenna or transmitter. 2015-12-17 Date:
Author willie Review Approval Issue department: Innovation center Product specification BT40A Product specification of plug-in Bluetooth BT40A Date:
Author:
2015.12.17 Willie Version 1 14 14 Page 14 of 14 Cet quipement est conforme aux limites d'exposition aux radiofrquences dfinies par la Industrie Canada pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 5mm de distance entre le dispositif et l'utilisateur ou des tiers. 5mm Ce dispositif ne doit pas tre utilis proximit dune autre antenne ou dun autre metteur. CAN ICES-3 (B)/NMB-3(B)
/Installation considerations Fix with screw and nut, do not fold and bend when install, over force will cause the fracture of the screw.
/Maintenance 1 Non-waterproof products are not allowed to place in wet areas, and all the products cannot be washed by water but wiped by alcohol. 2 The appearance is adopt plastic material with many components which need to be handle with care and install correctly. 3;
Comply with safety operation procedures. Don not overload the products, and eliminate unsafe factors in time. 4 Operating environment and temperature: Under normal temperature;
5 80%
Relative humidity: 80%. 2015-12-17 Date:
Author willie Review Approval