Issued by R&D dept. Creation date 2017.04.13 Founder Peter Product specification APP (JLDK.) APP Blue Tooth system Specification (JLDK.) ProductAppearance APP - JLDK. APP blue tooth JLDK. version 1 Page 1 for 4 DimensionDrawings
/ NONE Issued by R&D dept. Creation date 2017.04.13 Founder Peter Product specification APP (JLDK.) APP Blue Tooth system Specification (JLDK.) version 1 Page 2 for 4 ProductFeatures 1 APP Through APP control, can choose sofa independently. 2Can achieve three motor control, reading lamp control, seven colors cup lighting control and lamp belt control by single sofa. 3The color of the cup is synchronized with the lamp belt. 4 USB 2A USB charging port, support 2A charging . 5The motor can be controlled with spare switch. 5For leisure sofas and cinema armchairs. PerformanceData 1APP APP control 2 For Direct circuit 3 Other data is shown in the following table.
Output USB USB output voltage USB USB output current Input Input voltage range Environment Other Cable 5V 2A 29V Indoor use ConnectionDiagram
Bluetooth control box
Cup holder
Emergency switch
Cup holder
Emergency switch
USB socket Main motor-Backrest/recline Single motor-Head tilt Single motor-Lumbar SMPS/
SMPS/
Main motor-Backrest/recline
Connecting line
Connecting line Single motor-Head tilt Single motor-Lumbar Issued by R&D dept. Creation date 2017.04.13 Founder Peter Product specification APP (JLDK.) APP Blue Tooth system Specification (JLDK.) version 1 Page 3 for 4 Environment FAQ A: My sofa doesnt work. Q: Please take the following steps to check your sofa. 1. Check the SMPS light 1.1 1.2 1.1 If the SMPS light is on, the system works. 1.2 If the SMPS light is off, please check whether there is a disconnection. If all items are connected properly but the light is still off, please replace the SMPS and retry. 2. Press a switch key and check the LED light 2.1 2.2 2.1 If the LED light is on, the system works. If the light is on but the sofa still doesnt work, please replace the switch or the actuator, for the circuit of the product might be the major cause of the fault. 2.2. If the LED light is off, please check whether there is a disconnection or any cuts or crimps in cables. If the connection and the cables are in good condition but the light is still off, please replace the switch.
MaintenanceInstructions 1 Please do not use the non-water proof products in damp environment. No products can be washed with water. Cleaning with alcohol is allowed. Issued by R&D dept. Creation date 2017.04.13 Founder Peter Product specification APP (JLDK.) APP Blue Tooth system Specification (JLDK.) 2 Please handle the product with care and install it properly to avoid any breaks in plastic material or in small components. 3;
Please follow the specification and eliminate insecurities in time. Overload is not allowed. 4 Ambient temperature: room temperature. 580%
Relative humidity: no more than 80%. Page 4 for 4 version 1 Issued by R&D dept. Creation date 2017.04.13 Founder Peter Product specification APP (JLDK.) APP Blue Tooth system Specification (JLDK.) version 1 Page 4 for 4 FCC Any Changes or modifications not expressly approved by the party responsible for compliance could void the usersauthoritytooperatetheequipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This devicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation. ISEDRSSWarning:
ThisdevicecomplieswithInnovation,ScienceandEconomicDevelopmentCanadalicenceexemptRSSstandard(s). Operationissubjecttothefollowingtwoconditions:(1)thisdevice maynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmay causeundesiredoperationofthedevice. LeprsentappareilestconformeauxCNRd'ISEDapplicablesauxappareilsradio exemptsdelicence. L'exploitationestautoriseauxdeuxconditionssuivantes:
(1)l'appareilnedoitpasproduiredebrouillage,et
(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradiolectriquesubi, mmesilebrouillageestsusceptibled'encompromettrelefonctionnement. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. ISED Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte IC fixaient un environnement non contrls.Installation et mise en uvre de ce matriel devrait avec changeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres.