Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF3011 Edition 1.1 Page 1 of 5 Instruction of RF3011 Figure1buttonofremote 1/5
Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF3011 Edition 1.1 Page 2 of 5 1. Item 1.1 ZG buttonbutton 1 in figure 1 Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move;
1.2 AntiSnore buttonbutton 3 in figure 1 Click AntiSnore button, actuators move to AntiSnore position, stop when click any button during movement Press and hold AntiSnore button for 5s, timer LED of remote flashes, the control box records current position as AntiSnore position;
When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move;
1.3 TV/PC buttonbutton 4 in figure 1 Click TV/PC button, actuators move to TV/PC position, stop when click any button during movement Press and hold TV/PC button for 5s, timer LED of remote flashes, the control box records current position as TV/PC position;
When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move;
1.4 Childlock buttonbutton 5 in figure 1 In unlocked state, press and hold the childlock button, the red backlight of children lock button begins to flash, after 5s, the red backlight stops flashing, remote entersl into locked state;
Under locked state, press any button except childlock button, the red backlight of childlock turns on, the button you pressed is invalid;
2/5 Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF3011 Edition 1.1 Page 3 of 5 Under locked state, press and hold childlock button, red backlight of childrenlock begins to flash,after 5s, the red backlight stops flashing, remote enters into the normal working condition;
1.5 LOUNGE buttonbutton 6 in figure 1 Click LOUNGE button, actuators move to LOUNGE position, stop when click any button during movement Press and hold LOUNGE button for 5s, timer LED of remote flashes, the control box records current position as LOUNGE position;
When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move;
1.6 Reset all memory positions to default settingsbutton 1 and 11 in figure 1 Pressa and hold ZG+FLAT buttonsbutton 1 and 16 in figure 2for 5s, timer LED of remote flashes, the control box reset all memory positions to default settings 1.7 Head upbutton 7 in figure 1 Press and hold HEAD UP button of remote, head actuator moves out, stop when released 1.8 Head downbutton 10 in figure 1 Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released 1.9 Foot upbutton 8 in figure 1 Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.10 foot downbutton 9 in figure 1 Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released 3/5 Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF3011 Edition 1.1 Page 4 of 5 When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and foot actuators start moving;
1.11 Flatbutton 11 in figure 1 Click FLAT button, the bed goes flat, stop when click any button during the process of going flat FCC Waring Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 4/5 Power Cord AC Pair&Power Cord DC Power Supply
(JLDP.10.023.000) Remote model
(RF3011) 1 2 3 4 5 6 7 R5.504.01.250 JLDP.10.023.000 Power Cord AC Power Supply R5.217.01.013 Pair&Power Cord DC Synchronization Cable CB.11.20.01 Control Box RF3011 Motor/(Head&Foot) Remote model 1 1 1 1 2 1 Control Box CB.11.20.01 SYNC. Head Foot Motor Page 5 of 5