Issue departmentBedding Division ProductFunction instruction RF.31.18.01 Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 1 of 8 RF.31.18.01 Functioninstruction 1. Electricalconfigurationdiagram CB.13.22.01 1 Issue departmentBedding Division ProductFunction instruction RF.31.18.01 Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 2 of 8 2. FunctionPicture 2 1. Process of test Issue departmentBedding Division ProductFunction instruction RF.31.18.01 Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 3 of 8 A. HEAD UP buttonPress and hold the button, the Head actuatorwill go up. Stop when released. B. HEAD DN buttonPress and hold the button, the Head actuator will go down. Stop when released. C. FOOT UP buttonPress and hold the button, the Foot actuator will go up. Stop when released. D. FOOT DN buttonPress and hold the button, the Foot actuator will go down. Stop when released. E. HEAD & FOOT UP buttonPress and hold the button, the Head and Foot actuator will simultaneously go up. Stop when released. F. HEAD & FOOT DN buttonPress and hold the button, the Head and Foot actuator will simultaneously go down. Stop when released. G. ZERO GRAVITY button: Click the button, the Head and Foot actuator will start up and keep running until arriving to the zero gravity position. Running can be stopped by clicking any button. H. ANTI SNORE button: Click the button, the Head and Foot actuator will start up and keep running until arriving to the ANTI SNORE position. Running can be stopped by clicking any button. 3 Issue departmentBedding Division ProductFunction instruction RF.31.18.01 Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 4 of 8 I. FLAT button: Click the button, the Head and Foot actuator will start up and keep running until arriving to the FLAT position. Running can be stopped by clicking any button. J. MEMORY A button: Click the button, the Head and Foot actuator will start up and keep running until arriving to the Memory A position preset by user. Running can be stopped by clicking any button. K. MEMORY B button: Click the button, the Head and Foot actuator will start up and keep running until arriving to the Memory B position preset by user. Running can be stopped by clicking any button. The blue LEDs for backlight are on as long as any button is pressed. IF all buttons are released the LEDs will automatically turn off three seconds later. The blue LED for power is always on as long as the power on. The below positions can be changed or set by the end user. The Zero gravity position;
The Memory A position;
The Memory B position;
The procedure to set these special positions is below:
Step 1: Click the button to flat the bed;
Step 2: Adjust the Head and Foot position to a desired position by pressing the button HEAD_ UP or HEAD_DOWN or FOOT_UP or FOOT_DOWN;
4 Issue departmentBedding Division ProductFunction instruction RF.31.18.01 Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 5 of 8 Step 3: Press and hold the button for 3sec, backlight LED start flashing;
Step 4: Release the button before LED stop flashing. Then the Flashing stops immediately to indicate the corresponding operating has completed successfully. button then click one of or or ALL of the Zero gravity position and the Memory A position and the Memory A position can be restored to default sets by pressing and holding the button for approximate six seconds until the backlight LEDs finally stop flashing from first flashing. L. FLASHLIGHT buttonClick the button, the Flashlight on the remote control will turn on if it is being off or turn off if it is being on. If the Flashlight is turning on as the button pressed, it will keep on as long as the button pressed. When the button is released, the Flashlight will still keep on for several seconds then turn off with the backlight turning off together. M. UNDERLIGHT buttonClick the button, the Under-light under the bed will turn on if it is being off or turn off if it is being on. If the Under-light is turning on as the button pressed, it will keep on for 5 minutes then turn off automatically if the button isnt pressed again. N. Vibration INTENSITY ICREASEMENT button Click the button the vibrating intensity will raise up one level, total 3levels. O. Vibration INTENSITY DECREASEMENT button 5 Issue departmentBedding Division ProductFunction instruction RF.31.18.01 Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 6 of 8 Click the button the vibrating intensity will lower down one level, total 3 levels. The number of level represents the vibrating intensity. More big number of the level, more strongly vibrating it is. The strongest vibrating is level 3, and the weakest is level 1. Implement adjustment of the vibrating intensity is the way known as PWM. Different vibration of PWM makes different intensity. The value of the vibration corresponding to the level is below:
v i b r a t i o n L e v e l 2 0 %
3 5 %
5 0 %
1 2 3 P. Vibration SPEED INCREASEMENT button If the vibrating has started up, click the button, the vibrating speed will raise up one level, total 4 levels. Q. Vibration SPEED DECREASEMENT button If the vibrating has started up, click the button, the vibrating speed will lower down one level, total 4 levels. The Speed essentially represents the vibrating mode. The mode in speed level 0~2 is that the motor vibrates at intervals and the mode in speed level 3 does continuously. The intervals and the corresponding level are below:
ON time OFF time Level 500mS 500mS 350mS 350mS 200mS 200mS Continuous 0 1 2 3 Note: ON time-----On vibrating 6 Issue departmentBedding Division ProductFunction instruction RF.31.18.01 OFF time-----Stop vibrating Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 7 of 8 PS: If the vibrator has stopped, press any one of the four buttons of
, the vibrator will start up in the intensity of level one and in the previous speed. R. Vibration time button Press the button and released to stop all movesincluding the actuators and vibrator and change circularly the vibrating time of the vibrator by one level once, total 3 levels The time means that vibrating keeps on for this period then automatically stops if no any button related to vibrating is pressed again. The time and the LED indication are below:
This LED flash a time, the vibrating time is 10minutes;
This LED flash a time, the vibrating time is 20minutes;
This LED flash a time, the vibrating time is 30minutes;
10min,20min,30min LED 7 Issue departmentBedding Division ProductFunction instruction RF.31.18.01 FCC Date Author 2017-09-21 Kyle NoRF.31.18.01 Version 1.1 Page 8 of 8 Any Changes or modifications not expressly approved by the party responsible for compliance could void the usersauthoritytooperatetheequipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This devicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation. ISEDRSSWarning:
ThisdevicecomplieswithInnovation,ScienceandEconomicDevelopmentCanadalicenceexemptRSSstandard(s). Operationissubjecttothefollowingtwoconditions:(1)thisdevice maynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmay causeundesiredoperationofthedevice. LeprsentappareilestconformeauxCNRd'ISEDapplicablesauxappareilsradio exemptsdelicence. L'exploitationestautoriseauxdeuxconditionssuivantes:
(1)l'appareilnedoitpasproduiredebrouillage,et
(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradiolectriquesubi, mmesilebrouillageestsusceptibled'encompromettrelefonctionnement. 8