Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 1 of 8 FunctionInstructionsofRF358D Productdescription MassageWave HeadMassage FANSYNC FanLeft UnderbedLightadjustment Headactuatoradjustment Antisnore MemoryTV LEDforMassageWave FootMassage FANStrength FANRight Footactuatoradjustment ZeroG MemoryFavorite Flat Madeby:Jarek Checkedby:
1/8 Confirmedby:
Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 2 of 8 FCC ID: WKZ-CU3582 IC:20840-CU3582 Function description 1. Paringcode Processofparingcode:
DoubleclickRESETbuttononcontrolboxpairingLEDturnsonThecontrolboxentersthemode ofcodeparing;
Pressandholdthecodeparingbuttonunderbatterycover,thebacklightofparingLEDflashes, andthebacklightofremoteflashes,theremoteentersintomodeofcodeparing;
ThebacklightofparingLEDstopsflashingandtheparingLEDofcontrolboxturnsoff,itindicates thatthecodeparingissuccessful;
Iffails,repeatallthestepsabove;
2. Headactuatormovesout Pressandholdthehead upbutton,headactuatormovesout,stopwhenreleased;
Madeby:Jarek Checkedby:
2/8 Confirmedby:
Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 3 of 8 3. Headactuatormovesin Pressandholdtheheaddownbutton,headactuatormovesin,stopwhenreleased;
4. Footactuatormovesout Pressandholdfoot up button,footactuatormovesout,stopwhenreleased;
5. Footactuatormovesin Pressandholdfoot downbutton,headactuatormovesin,stopwhenreleased;
6. Underbedlighting Click underbed lighting button, turn on (or turn off) the undered lighting, it switches its status oncewhenclickthebuttoneverytime;
7. FLATfunction ClickFLAT button,headandfootactuatorsmovetothelowestposition(whentheactuatorsare free,youcanstopthemassagemotor,turnoffthemassagemotorLED),runningcanbestopped byclickinganybutton;
8. ZEROGposition ClickZERO Gbutton,headandfootactuatorsmovetothememorypositionwhichispreset, runningcanbestoppedbyclickinganybutton;
9. ANTISNOREposition ClickANTISNOREbutton,headandfootactuatoractuatorsmovetothememorypositionwhichis preset,runningcanbestoppedbyclickinganybutton;
Madeby:Jarek Checkedby:
3/8 Confirmedby:
Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 4 of 8 10. MemoryFavoriteposition ClickMemory Favoritebutton, head and foot actuators move to the memory position which is preset,runningcanbestoppedbyclickinganybutton;
11. MemoryTVposition ClickMemory TVbutton, head and foot actuators move the memory position which is preset, runningcanbestoppedbyclickinganybutton;
12. CustomizedpositionbuttonANTISNORE MemoryFavoriteMemory TV The custom setting processesare as follows:
1. Click FLATbutton, flat the actuator;
2.Operate the head uporhead down or foot up or foot down button, adjust thehead actuator and foot actuator to an expected position;
3.Press and hold the button that needs customize position, hold for 5s, the LED on the top of the remote cycle flashes;
4.Release the button, LED stops flashing, it indicates that the customization is finished. The default position setting can be restored to the default setting. Press and hold the ZERO G + FLAT button for about 5 seconds. The LED on the top of the remote cycle flashes, whenthe LED stops flashing, it indicates that the setting to the default position is finished. 13. Headmassageadjustmentfunction Every time when click HEAD massage button, the intensity of head massage motor enhances by one level, there are three massage intensities totally. When in the third intensity, click HEAD massage button again, the intensity levelswitches to 0, the mode cycles;
Madeby:Jarek Checkedby:
4/8 Confirmedby:
Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D 14. Footmassageadjustmentfunction Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 5 of 8 Every time when click FOOTmassage button, the intensity of head massage motor enhances by one level, there are three massage intensities totally. When in the third intensity, click FOOT massage button again, the intensity level switches to 0, the mode cycles;
Madeby:Jarek Checkedby:
5/8 Confirmedby:
Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 6 of 8 16. Childlock PressandholdHeadUp&HeadDown.,aftermorethan6s,youcanseethebacklightflashes2 rounds, which indicates that the remote turns on the child lock; if you press any button, the controlboxhasnoaction;
PressandholdHeadUp&HeadDown,aftermorethan6s,youcanseethebacklightflashes2 rounds, which indicates that the remote turns off the child lock; if you press any button, the controlboxhascorrespondingaction;
17. AffiliatedFANfunction ThisfunctionisusedasanaccessoryfortheFANcontrolbox.Itisusedbythesynccableaccessto controlboxMFPport.Thefunctionsareasfollows:
1.17.1. Click the FAN L+ button to turn on the port B of fan control box which controls the lowmidhign output of fan, and there are third air volume which corresponds to the three indicators of FAN L led. The default fan is turned on for 10 hours. Click again to closetheportBoffancontrolbox. PressandholdtheFANL+buttonformorethan3stoturnonthestepdownmodeofthe left fan; click again to switch the fan gear and automatically turn off the stepdown mode;
1.17.2. Click the FAN R+ button to turn on theport A of fan control box which controls the lowmidhign output of fan, and there are third air volume which corresponds to the three indicators ofFAN R led. The default fan is turned on for 10 hours. Click again to closetheportAoffancontrolbox. PressandholdtheFANR+buttonformorethan3stoturnonthestepdownmodeof therightfan;clickagaintoswitchthefangearandautomaticallyturnoffthestepdown mode;
1.17.3. ClickFANSYNCbuttontoturnontheportA&Boffancontrolboxwhichcontrolsthelow wind>midwind>hignwind>offoffan,correspondsthethreeindicatorsonbothsides oftheFANLledandFANRled,andthedefaultfanisturnedonfor10hours,sothatthe cycleisrepeated;
PressandholdtheFANSYNCbuttonformorethan3s,andturnonthestepdownmode ofthe two fans at the same time; clickagain to switch the fan gear and automatically closethestepdownmode;
2.19.4.PressandholdtheFANL+andFANR+buttonsimultaneously.Ifitexceeds3S,youcansee thatthebacklightoftheremotecontrolflashestwice.Thefancontrolboxentersthedemomode. Thedefaulttimeis5min.PressanyFANrelatedbuttontoturnoffthefancontrol. Remark LED1 lights, itcorrespondslowwind,outputdutyratiois30%;
LED2 lights, itcorrespondsmidwind,outputdutyratiois40%;
Madeby:Jarek Checkedby: Confirmedby:
6/8 Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D LED3 lights, itcorrespondshighwind,outputdutyratiois50%;
AllthreeLEDsareofftoindicatethatthefanfunctionisturnedoff;
Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 7 of 8 Stepdownmodedescription Inthecurrentfanposition,oncethestepdownmodeisstarted,afterthefanrunsfor5hours,it automatically switches to the corresponding weakened gear position. The corresponding relationshipisasfollows:
Fangear in normal Gear duty cycle mode 30%
40%
50%
Stepdown mode, gear duty cycleafter5hours 0%
30%
40%
1 2 3 18. Descriptionofremotecontrolcurrentandbacklight After power on, observe the work current of remote(<40mA);
After the key operation, place still for 5s, the backlight of remote turns off and the remote enters into sleep mode. Observe the sleep current of remote control (< 10uA). If the remote control enters into sleep mode, the remote can be wakened up by pressing any button or shaking; Continues to wake it up for 6 times and do not press any button, then you can only wake up the remote control by key operation. Note: When the actuator is in flat postion, and you press the memory position button, the motor can move to the theoretical angle or theoretical stroke, the error range will no more than 3 or 5mm. Madeby:Jarek Checkedby:
7/8 Confirmedby:
Division Issuing DepartmentBedding Function Test Instructions Function Test Instructions of RF358D Date Author 2018-10-15 Aaron ModelRF358D Edition 1.0 Page 8 of 8 FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning:
this device must accept any interference, and interference, Innovation,Science and Economic Development Canada This device complies with licence exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this devicemay not cause
(2) undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi,mme si le brouillage est susceptible d'en compromettre le fonctionnement. includinginterference that may cause Madeby:Jarek Checkedby:
8/8 Confirmedby: