FCC ID: SV4-OMWF01 Omitec Wi-Fi Module

All Omitec products incorporating the WiFi module will have the following text clearly printed into the manual with the actual product name replacing the

<OMITEC PRODUCT NAME> text below. FCC STATEMENT The <OMITEC PRODUCT NAME> has been tested and found to comply with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receiver's Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any change or modification to the product not expressly approved by Omitec could void the user's authority to operate the device. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an occupational/controlled environment. This equipment should be operated with a minimum distance of 20cm between the radiator and your body.

WiPort Data Sheet General Description The WiPort is the most compact, integrated solution available to add 802.11b wireless networking to any edge device with a serial interface. Using our highly integrated hardware and software platform, you will add to your bottom line by significantly reducing product development time, risk, and cost. The WiPort offers the highest level of integration available in a device server. Within a compact package is a DSTni x86 controller, memory, 802.11b transceiver, a 10/100 Ethernet transceiver, and dual high-speed serial ports. All of this combines to give you a complete networking solution. The WiPort is the first product in a line of embedded wireless device servers, designed with flexibility to support additional wireless standards without requiring redesign. To enable access to a local network or the Internet, the WiPort integrates a fully developed TCP/IP network stack and OS. The WiPort also includes an embedded web server that can be used to remotely configure, monitor, or troubleshoot the attached device. WiPort serves web pages to a web browser when there is a need to gather information or communicate with networked devices. The WiPort becomes a conduit between you and your device over the network or Internet. The Windows-based configuration software, Device Installer, simplifies installation and setup. The WiPort can also be configured locally through its serial port, or remotely over a network using Telnet (password-

protected) or a web browser. Flash memory provides for maintenance-free, nonvolatile storage of web pages, and allows future system software upgrades. Hardware & Software Description The WiPort functions independently of a PC, providing a complete hardware and software solution for adding wireless connectivity to your edge devices. Within a single package this powerful device server comes with an 802.11b wireless connection, a 10/100 Ethernet transceiver, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/IP protocol stack, and WEP security. The WiPort software runs on a Lantronix DSTni controller which has 256 KB of internal SRAM, and 16 KB of boot ROM. The WiPort communicates to the edge device through a 3.3V logic level interface. 2 MB of flash memory is included for storing firmware and web pages. Key Features Complete integrated solution Supports WLAN or Ethernet connectivity Serial to 802.11b conversion Stable, field proven TCP/IP protocol suite and web-

based application framework Easy configuration through a web interface Easy installation of customized web pages Embedded web server 11 General Purpose Input/Output (GPIO) pins 802.11b wireless interface E-mail alerts Password protection Upgradeable firmware via the network or serial port Dual serial ports 128 bit WEP encryption WPA security upgradeable High performance data throughput A larger memory option is available that includes 4 MB of flash memory, and an additional 1 MB of SRAM. The WiPort runs on a single 3.3V supply, and has a built-in voltage supervisory circuit. The WiPort will connect through a coaxial cable pigtail to a panel-mounted external antenna, which makes the electro-mechanical integration very simple. WiPort Data Sheet Copyright 2004, Lantronix. All rights reserved. Protocol Support The WiPort uses the widely accepted 802.11b protocol to connect to a wireless access point or ad-hoc network. It uses the Transmission Control Protocol

(TCP) to assure that no data is lost or duplicated and that everything sent to the connection arrives correctly at the target. Other supported protocols are listed below:

ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for network communications. TCP, UDP, and Telnet for connections to the serial port. IP for addressing, routing, and data block handling over the network. a User Datagram Protocol (UDP) for typical datagram applications in which devices interact with other devices without maintaining point-to-point connection. Dimensions The WiPort dimensions are shown in the following drawing:

TFTP for firmware updates. WiPort Embedded Web Server WiPort Data Sheet WiPort Data Sheet WiPort Pin Functionality Pin Number WiPort Pin Function Pin Number WiPort Pin Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3.3V Power 3.3V Power RTS0 TXD0 RXD0 Configurable Pin 2 Configurable Pin 3 CTS0 Configurable Pin 10 Configurable Pin 8 Signal Ground Signal Ground Reset In Configurable Pin 0 RTS1 TXD1 RXD1 Configurable Pin 9 Configurable Pin 4 CTS1 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Reserved Reserved Signal Ground Signal Ground Reserved Reserved Ethernet Status LED2 Ethernet Status LED1 Ethernet TX-

Ethernet TX+

Ethernet RX Center Tap Ethernet TX Center Tap Ethernet RX-

Ethernet RX+

Configurable Pin 1 WLAN Power LED Configurable Pin 6 Configurable Pin 5 WLAN Activity LED Configurable Pin 7 Mating Connector Recommended: Samtec FTMH-120-03-F-DV-ES

(shrouded header) Alternative: Samtec FTMH-120-03-F-DV

(not shrouded) Alternative: Oupiin 2411-2X20GDN/017 (not shrouded) Description The mating connector is a 1mm micro header, 40 pins, 2 x 20. WiPort Wireless Specifications Category Network Standard Frequency Range Antenna Connector Data Rates Radio Number of Selectable Subchannels Modulation Antenna Connector Security Maximum Receive Level Receiver Sensitivity WLAN Power and Link LED Current Description IEEE 802.11b 2.412 2.484 GHz 1, no diversity supported. 1,2,5.5,11Mbps(802.11b HR) 14 channels DSSS, DBPSK, DQPSK, CCK 1 WEP 64/128, TKIP

-10 dBm (with PER < 8%)

-82 dBm for 11Mbps

-87 dBm for 5.5Mbps

-89 dBm for 2.0Mbps

-93 dBm for 1.0Mbps Max: 4 mA WiPort Data Sheet WiPort Technical Data Category CPU, Memory Firmware Reset Circuit Serial Interface Serial Line Formats Modem Control Flow Control Network Interface Protocols Supported Data Rates With Automatic Fallback Media Access Control Frequency Range Range Modulation Techniques Average Power Consumption Peak Supply Current Management Security Internal Web Server Weight Material Temperature Warranty Included Software Description Lantronix DSTni-EX 186 CPU, 256 KB zero wait state SRAM 2048 KB Flash or 4096 KB Flash, 16 KB Boot ROM, 1024 KB SRAM Upgradeable via TFTP and serial port Reset In is low active. Minimum reset pulse width is 2 ms at IIL = -500A CMOS (Asynchronous) 3.3V-level signals Rate is software selectable (300 bps to 921600 bps) 7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none DTR, DCD XON/XOFF (software), CTS/RTS (hardware), none Wireless 802.11b and 10/100 Ethernet 802.11b, ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP, TFTP

11 Mbps

5.5 Mbps

2 Mbps

1 Mbps CSMA/CA with ACK 2.412 2.484 GHz Up to 328 feet indoors

CCK (11 Mbps)

CCK (5.5 Mbps)

DQPSK (2 Mbps)

DBPSK (1 Mbps)

-82 dBm for 11 Mbps

-87 dBm for 5.5 Mbps

-89 dBm for 2.0 Mbps

-93 dBm for 1.0 Mbps

1280 mW, 388 mA (WLAN mode; maximum data rate)

820 mW, 248 mA (WLAN mode; idle)

710 mW, 215 mA (Ethernet mode) 460 mA Internal web server, SNMP (read only) Serial login, Telnet login DeviceInstaller software Password protection, locking features, 64/128 bit WEP Serves web pages and Java applets Storage capacity: 1.8 MB or 3.8 MB (depending on Flash size) 29 grams Metal shell Operating range, WLAN: -40C to +70C Operating range, Ethernet: -10C to +75C Storage range: -40C to +85C (-40F to 185F) 2-year limited warranty Windows 98/NT/2000/XP based DeviceInstaller configuration software and Windows based Comm Port Redirector, DeviceInstaller, Web-Manager. Transmit Output Power 14 dBm 1 dBm Receiver Sensitivity WiPort Data Sheet Certifications Description Product Safety Country Certifications USA/Canada Europe U.S. and Canadian (Bi-National) Standard for Safety of Information Technology Equipment, CSA-22.2 No. 60950-1-03 * UL 60950-1 Standard for Safety of Information Technology Equipment, EN 60950-1 International IEC 60950-1 Agency Compliance Description Country Compliance USA CFR Title 47 FCC Part 15 Electromagnetic Compatibility Europe Canada Australia /New Zealand Japan EN 300 328; Data Transmission Equipment Operating in the 2.4GHz ISM Band and Using Spread Spectrum Techniques EN 301 489-17 & EN 301 489-1; EMC Standard for Radio Equipment and Services Industry Canada RSS-210 Low Power License-Exempt Radiocommunication Devices AS/NZS CISPR 22 (EMC) AS/NZS 4771 (Radio) VCCI (EMC) DC Characteristics for Serial and Power Interface Symbol Vcc VIL VIH VOL VOH IL Parameter Supply voltage (typical 3.3) (+/-5%) Low Level Input Voltage High Level Input Voltage Low Level Output Voltage High Level Output Voltage Input Leakage Current Min 3.14

-0.3 2.0 2.4 3.3 Nominal Max 3.46 0.8 5.5 0.4

+/-1

+/-0.01 Units V V V V V A WiPort Data Sheet Development Kit Introduction A WiPort development kit is available to provide a simple, quick and cost-effective way to evaluate the WiPort. Use the development kit to connect the WiPort to your product design, and give your newly networked product a test drive. Features of the Development Kit Complete, ready-to-use WiPort and supporting Evaluation Board 3.3V power supply RS-232 cable, DB9F/F, null modem CAT5e UTP RJ45M/M Ethernet cable WiPort CD containing complete user documentation, DeviceInstaller, and the Comm Port Redirector Antenna Features of the Evaluation Board The WiPort evaluation board includes a WiPort integrated with the following features:

Ready to use just plug in the WiPort and connect to your system Dual high-speed RS-232 transceivers & DB9 connectors for easy connection to a PC Complete Ethernet interface, including magnetics, RJ-45 jack, and status LEDs Test header for easy access to all 40 of the WiPort power & I/O pins Ordering Information Model WiPort Part Number WP2001000-01 WiPort SMPL WP200100S-01 WiPort Dev. Kit WiPort Antenna WP200100K-01 930-029 Description Standard WiPort Min. order: 25 units WiPort Sample Case 1 WiPort enclosed WiPort Development Kit Accessory Antenna For details contact your local Lantronix representative or Lantronix directly:

Asia Pacific Region (E-mail): AsiaPacific_sales@lantronix.com Europe (E-mail): eu_sales@lantronix.com Japan (E-mail): japan_sales@lantronix.com United States (E-mail): sales@lantronix.com Latin America & Caribbean (E-mail): la_sales@lantronix.com or call OEM sales support at 800-526-8764. 2004 Lantronix, Inc. All rights reserved. Lantronix, WiPort and DSTni are trademarks of Lantronix. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-440B 08/2004 WiPort Data Sheet

SPECIFICATION FOR APPROVAL Tri Band Swivel Type Antenna RP-SMA (M) VNW0768A1 CUSTOMER DATE

~ W DESCRIPTION CUSTOMER P/N

~ s Part No. Uq~q WANSHIH ELECTRONIC CO., LTD. x_mu 72 3 3F 72 WU KONG 6TH RD., WU KU INDUSTRIAL DISTRICT TAIPEI HSIEN, TAIWAN,R.O.C. TELG (02) 22988066 (5 LINE) FAXG (02)22981102 Table of Contents Table of Contents Specification Antenna Drawing Connector Drawing Electrical Properties Return Loss V.S.W.R 1 2 3 4 5 6 Radiation Pattern 7-8 Material Data Sheet Coaxial Cable 9-11 Housing Hinge 12 13 1 SPECIFICATION 1. Description 2. Customer 3. Model No. 4. Part No. 5. Standard 6. Antenna Profile 7. Color : black 8. Electrical Characteristics Operating Frequency G Tri Band Swivel Type Antenna GAlpha Micro Components Ltd G WSS015 G VNW0768A1 G IEEE 802.11a/b/g Wireless LAN G 83.3 mm length (see Drawing) G 2.4~2.5 & 4.9~5.35 &

5.7~5.85GHz Antenna Type G PCB Polarization Type G Linear Type of Radiation G Toroidal Peak Gain G 2.0 dBi Max@2.4~2.5GHz 5.0 dBi Max@4.9~5.8GHz Impedance V.S.W.R. G 50 Ohm nominal G 2.0:1 Max. 9. Mechanical Characteristics Action Connector Core 10. Raw Material Coaxial Cable Housing Hinge G Swivel Type G RP-SMA (M) G N/A G MIL-C-17 RG-178 B/U G TPU G Polycarbonate 2 TOLERANCES:

X 0.5 X.X 0.3 X.XX 0.1 ANGULAR 5.0 Blac k s ilver Black Black Black Black Orange Color 1 1 1 or Equi or Equivalent valent or Equivalent or Equivalent or Equivalent or Equivalent or Equivalent or Equivalent 1 1 2 1 1 48 Dim 1 Qt'y or Equivalent Remark Tri Band Swivel Type Antenna RP-SMA (Black) 9 8 7 6 5 4 3 2 1 NO Reverse SMA r10 Body Reverse SMA p 10 PIN Reverse SMA p 10 Shaft 0202B-A Body Reverse SMAr10 Connector 0062B-B PIN+TEFLON Reverse SMAp10 0202B-C1 Shaft Reverse SMAp10 Connector Housing PCB Rivet Hinge-Base Hinge-Holder RG-178 Coaxial Cable Material GM 9.3p*50.5L Housing PCB 23-15-1 Rivet 1.90 p,3.8L IY113BK000 9.3p Hinge-Base 9.5p*20.0L Hinge-Holder RG-178 CABLE 105SV Descriptiom Revised PageG 1/1 Approval Checked Data: 93/09/07 Customer Part No. Part Name Drawed UNITG mm ScaleG FREE Jim Ju Arthur Mandy Part No. VNW0768 WANSHIH ELECTRONIC CO,. LTD. 3 G 4 Electrical Properties Return Loss 5 Electrical Properties V.S.W.R 6 Electrical Properties Radiation Pattern H Plane 7 Electrical Properties Radiation Pattern E Plane 8 Coaxial Cable Data Sheet RG-178 SPECIFICATION FOR APPROVAL DOCUMENT:

A30178B001 STYLEG 200J 30V RG-178B/U SIZE:

7/0.102 SCCS RECOGNIZED:

@ WONDERFUL HI-TECH CO.,LTD OFFICEG 72WU KONG 6TH ROAD, WU KU IND. DISTRICT TAIPEI HSIEN,TAIWAN TELG (02)22988033 FAXG (02)22988031-2 FACTORYG 17 PEI YUAN ROAD, CHUNG-LI IND. PARK TAIWAN, R.O.C. TELG (03)4527777 FAXG (03)4517214 9

@ WONDERFUL HI-TECH CO., LTD SPECIFICATION DOCUMENT NO :

A30178B001 ESTABLISHED DATE:

2003/02/13 Silver-Coated Copper Clad Steel AWG

mm mm mm mm

mm

mm mm

30 7 0.102 0.30 0.28 0.86 FEP Clear Silver-Coated Copper 16 / 3 / 0.10 95 0.25 1.80 0.05 FEP Brown STYLE 200J 30V COAXIAL SIZE RG-178B/U STANDARD : MIL-C-17 Conductor Insulation Braid Jacket Marking Drawing Size Material Conductors No. Conductors Size O.D. Average Thickness Diameter Material Color Material Construction Coverage Average Thickness Diameter Material Color AK001/210X297/1.0 PAGE : 1 EDITION : 1.1 REVISED DATE :

MAKER : C.Y.CHEN CONFIRM : S.N.WONG APPROVAL : W.J.WANG 10

@ WONDERFUL HI-TECH CO., LTD SPECIFICATION Electrical & Physical Properties Item Rating Temp Voltage Conductor Resistance Insulation Resistance Dielectric Strength Spark Test RG-178B/U 200J 30V 838 OHM/KM/20J MAX. 3000 MEGA OHM/KM MIN. AC 1.0 KV/Minute 2.0 KV Insulation Jacket Unaged Aged Unaged Aged

) 200% MIN. Tensile Strength 2500 PSI MIN.( 1.76 Kg / T Elongation Tensile Strength UNAGED MIN 75%(168HRS232J) Elongation UNAGED MIN 75%(168HRS232J)

) Tensile Strength 2500 PSI MIN.( 1.76 Kg / T Elongation Tensile Strength UNAGED MIN.75%(168HRS232J) Elongation UNAGED MIN.75%(168HRS232J) 50 Ohms 95.8 pF/m 69.5%

200% MIN. Nom. Impedance Nom. Capacitance Nom. Vel. of Prop. VSWR (0 6 GHZ) UNDER 1.3 100MHz 1GHz 1.8GHz 2.4GHz 5.2GHz 6GHz Attenuation

(dB/100m) 550 AK001/210X297/1.0 PAGE : 2 EDITION : 1.1 REVISED DATE :

MAKER : C.Y.CHEN CONFIRM : S.N.WONG APPROVAL : W.J.WANG 155 295 340 505 46 11 Housing - TPU Housing Material Data Sheet 12

Hinge(Base/Holder)- Polycarbonate(PC) 13