Contactless IC Card Reader Model No. JT-R210CR-50 Introduction This document is instruction of precautions and maintenance for Contactless IC Card Reader. Please read this document carefully to operate the device properly. Please refer the manual, Operating Instructions of Payment Terminal(Model No. ZEC-14LG)before you operate the device. FeliCa and the FeliCa logo are registered trademarks of Sony Corporation. Precautions Safety 1. Avoid Radio Frequency Interference Do not place the reader near a television or radio receiver. 2. Avoid Stacking Do not place heavy objects on the reader. 3. Keep Small Objects Away Do not insert paper clips or other small objects into reader. There is the risk of heat, fire or explosion. 4. Keep Dry There is the risk of heat, fire or explosion. 5. Do Not Disassemble the Reader Do not attempt to disassemble the reader. There is the risk of explosion. Maintenance Clean the device with a dry soft cloth Stubborn stains may be removed with a cloth slightly dampened with a solution of mild soap and finish with a dry cloth. Notice:
Never use solvents such as alcohol, benzene or thinner for cleaning. Also do not apply insecticide, glass cleaner or hair spray for cleaning. (this may cause color fading or feel changing.) Specifications Items Display Dimensions Weight Power requirements Environment Description Type Resolution Specifications Monochrome LCD 64128 pixels Approx.W90 mmH47 mmD150 mm Approx.255 g(not include cables) 24 V DC Max.150 mA Operating Temperature Operating Humidity IC Card Radio Freq. Communication Card Type Communication Wired 0 to 40 30 % to 80 %RH (no condensation) 13.56 MHz FeliCa Serial communication This manual is copyrighted by Matsushita Electric Industrial Co.,Ltd. with all right reserved. Product may be subject to export control regulations. Specifications and manuals are subject to change without notice. Federal Communications Commission Requirements Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Panasonic system solutions company Matsushita Electric Industrial Co., Ltd. Phone:045-544-3447 Fax:045-544-3448 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan 3TR005618BAA P0608-1068