all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 1.68 MiB | / February 12 2013 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | / February 12 2013 | ||||||
1 2 | Internal Photos | / February 12 2013 | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Setup Photos | / February 12 2013 | ||||||
1 2 | Test Report | |||||||
1 2 | Attestation Statements | |||||||
1 2 | RF Exposure Info |
1 2 | Users Manual | Users Manual | 1.68 MiB | / February 12 2013 |
Operating Instructions Premium Design Phone with Smartphone Connect Model No. KX-PRW120 Before initial use, see Getting Started on page 9. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 55. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Please register your product: http://www.panasonic.com/prodreg PRW120(en)_1009_ver031.pdf 1 2013/10/09 17:39:00 Remote operation .......................................39 Answering system settings .........................40 Smartphone Integration Smartphone integration ..............................42 Network settings .........................................42 Smartphone Connect app ..........................43 Other network features ...............................43 Useful Information Voice mail service ......................................45 Error messages ..........................................46 Troubleshooting .........................................47 Network connection troubleshooting ..........51 FCC and other information .........................53 Gua Rpida Espaola Gua Rpida Espaola ...............................55 Appendix Customer services .....................................59 Warranty (For United States and Puerto Rico) ...........................................................60 Index Index...........................................................62 Table of Contents Introduction Accessory information ..................................3 Important Information For your safety .............................................5 Important safety instructions ........................6 For best performance ...................................6 Other information .........................................7 Specifications ...............................................7 Getting Started Setting up .....................................................9 Intelligent eco mode ...................................10 Controls ......................................................11 Display icons ..............................................11 Language setting ........................................12 Date and time .............................................12 Other settings .............................................12 Making/Answering Calls Making calls ...............................................14 Answering calls ..........................................14 Useful features during a call .......................14 Intercom .....................................................16 Phonebook Phonebook .................................................17 Speed dial ..................................................19 Programming Menu list .....................................................21 Alarm ..........................................................27 Silent mode ................................................28 Call block ....................................................28 Baby monitor ..............................................29 Other programming ....................................31 Registering a unit .......................................32 Caller ID Service Using Caller ID service ...............................34 Caller list ....................................................34 Answering System Answering system ......................................36 Turning the answering system on/off .........36 Greeting message ......................................36 Listening to messages ...............................37 Advanced new message alerting features ......................................................38 2 PRW120(en)_1009_ver031.pdf 2 2013/10/09 17:39:00 Introduction Quantity 1 1 2 1 Accessory information Supplied accessories No. A AC adaptor/PNLV236Z B Telephone line cord/PQJA10075Z C Rechargeable batteries/HHR-4DPA D Handset cover*1/PNYNPRWA10WR Accessory item/Order number
*1 The handset cover comes attached to the handset. A B C D Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 59). Accessory item Rechargeable batteries Order number HHR-4DPA*1 R To order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery type:
Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-J66 KX-TGA405*2 KX-TGA20*3 T-adaptor Range extender Key detector
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:
http://panasonic.net/pcc/products/telephone/p/tga20/
Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. For assistance, please visit http://www.panasonic.com/help 3 PRW120(en)_1009_ver031.pdf 3 2013/10/09 17:39:00 Introduction Expanding your phone system Handset (optional): KX-PRWA10 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. Smartphone Your smartphone: 4 max. You can expand your phone system by installing the Smartphone Connect app on your smartphone and registering your smartphone to the base unit. R You must configure the base unit and download the app before you can use these features. See the Smartphone Integration chapter beginning on page 42 for more information. 4 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 4 2013/10/09 17:39:00 For your safety To prevent severe injury and loss of life/
property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262). R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. Wi-Fi features operate between 2.412 GHz and 2.462 GHz with a peak transmission power of 100 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC For assistance, please visit http://www.panasonic.com/help 5 PRW120(en)_1009_ver031.pdf 5 2013/10/09 17:39:00 Important Information outlet is installed near the product and is easily accessible. R This product is unable to make calls when:
the handset batteries need recharging or have failed. there is a power failure. R Do not place magnetic cards or similar objects near the phone. Magnetic data on the cards, etc. may be deleted. R Do not place metallic objects such as paperclips near the product. Metallic objects could cause a short circuit if they touch the charge contacts. Battery R We recommend using the batteries noted on page 3. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:
at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. 6 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 6 2013/10/09 17:39:00 Important Information Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Notice for product disposal, transfer, or return R This product can store your private/
confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Specifications R Communication standards DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Wi-Fi (IEEE 802.11 b/g/n) R Frequency range DECT:
For assistance, please visit http://www.panasonic.com/help 7 PRW120(en)_1009_ver031.pdf 7 2013/10/09 17:39:00 Important Information 1.92 GHz to 1.93 GHz Wi-Fi:
2.412 GHz to 2.462 GHz (channels 1 to 11) R RF transmission power DECT:
115 mW (max.) Wi-Fi:
100 mW (peak transmission power) R Encryption WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/
AES), WEP (128/64 bit) R Simplified configuration WPS (PBC) R Power source 120 V AC, 60 Hz R Power consumption Base unit:
Standby: Approx. 2.0 W Maximum: Approx. 3.9 W R Operating conditions 0 C 40 C (32 F 104 F), 20 % 80 %
relative air humidity (dry) 8 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 8 2013/10/09 17:39:00 Getting Started Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
). R Do NOT use Alkaline/Manganese/Ni-Cd batteries. R Confirm correct polarities (
). Setting up Connections n Base unit Press the AC adaptor plug firmly to the unit. Keep the plug in the horizontal position and fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit and single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note:
R Use only the supplied Panasonic AC adaptor PNLV236. R Follow the directions on the display to set up the unit. For assistance, please visit http://www.panasonic.com/help 9 PRW120(en)_1009_ver031.pdf 9 2013/10/09 17:39:00 24531411 Getting Started Battery charging Charge for about 7 hours. R Confirm Charging is displayed (
R When the batteries are fully charged, Fully charged is displayed.
). Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. During a power failure The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 3). Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 3, 6. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 10 hours max.*1 6 days max.*1
*1 If eco mode is on. Note:
R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. R Eco mode is turned off when the clarity booster is activated (page 15). 10 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 10 2013/10/09 17:39:01 11 Controls Handset Getting Started Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items.
(Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MCN CID (Caller ID): View the caller list. MFN W : View the phonebook entry. MEN REDIAL: View the redial list. Base unit N (Locator) M R You can locate a misplaced handset by pressing M Charge contacts N. Display icons Handset display items Item Meaning Within base unit range Out of base unit range The line is in use. R When flashing slowly: The call is put on hold. R When flashing rapidly: An incoming call is now being received. N (TALK) Charge contacts MZN (SP-PHONE: Speakerphone) M Dial keypad (*: TONE) Speaker Receiver Display MFLASHNMCALL WAITN MOFFN Microphone n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Eco mode is on. (page 10) Noise reduction is set.
(page 15) Speakerphone is on.
(page 14) For assistance, please visit http://www.panasonic.com/help Z 11 PRW120(en)_1009_ver031.pdf 11 2013/10/09 17:39:01 ABCDFGHIJEBA Getting Started Item Booster on Line in use In use Meaning Answering system is on.
(page 36) Ringer volume is off.
(page 23) Silent mode is on. (page 28) Call sharing mode is off.
(page 25) Alarm is on. (page 27) Equalizer is set. (page 15) The key backlight is off.
(page 24) Handset number Battery level Blocked call (page 29) Baby monitor is activated. The name/number displayed next to the icon indicates the monitoring unit. (page 29) Clarity booster is on.
(page 15) Someone is using the line. Answering system is being used by another handset. Handset soft key icons Icon W Action Temporarily turns off the ringer for incoming calls. (page 14) Opens the phonebook. 2 MbN: Select the desired setting. a MSaveN 3 MOFFN Voice guidance language You can select either English or Espaol as the voice guidance language of the answering system. The default setting is English. 1 MMenuN (right soft key) #112 2 MbN: Select the desired setting. 3 MSaveN a MOFFN Date and time 1 MMenuN (right soft key) #101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2013 07 15 13 3 MOKN 4 Enter the current hour and minute
(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSaveN a MOFFN Note:
R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Language setting Display language You can select either English or Espaol as the display language. The default setting is English. 1 MMenuN (right soft key) #110 Other settings Screen saver mode The backlight goes dark when on a call or turns off completely after 1 minute of inactivity if the handset is not on the base unit or charger. Activate the handset display again by:
12 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 12 2013/10/09 17:39:01 Getting Started pressing M pressing MOFFN at all other times. N when on a call. Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. 1 MMenuN (right soft key) #120 2 MbN: Select the desired setting. 3 MSaveN a MOFFN For assistance, please visit http://www.panasonic.com/help 13 PRW120(en)_1009_ver031.pdf 13 2013/10/09 17:39:01 Making/Answering Calls Making calls 1 Lift the handset and dial the phone number. R To correct a digit, press MClearN. 2 Press M 3 When you finish talking, press MOFFN or N. place the handset on the base unit or charger. Using the speakerphone 1 Dial the phone number and press MZN. 2 When you finish talking, press MOFFN. Note:
R To switch back to the receiver, press MZN/
M N. Adjusting the receiver or speaker volume Press MDN or MCN repeatedly while talking. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.). 1 MEN REDIAL 2 MbN: Select the desired phone number. 3 M N Erasing a number in the redial list 1 MEN REDIAL 2 MbN: Select the desired phone number. 3 MbN: Yes a MSelectN a MOFFN a MEraseN Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 19). Example: If you need to dial the line access number 9 when making outside calls with a PBX:
1 9 a MDN (Pause) 2 Dial the phone number. a M Note:
R A 3.5 second pause is inserted each time N MDN (Pause) is pressed. Answering calls 1 Lift the handset and press M when the unit rings. N or MZN 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 24). Temporary ringer off: You can turn the ringer off temporarily by pressing M N. Adjusting the handset ringer volume Press MDN or MCN repeatedly to select the desired volume while ringing. Useful features during a call Hold 1 Press MMenuN during an outside call. 2 MbN: Hold a MSelectN 3 To release hold, press M Note:
R After holding for 10 minutes, the call is N. disconnected. Mute 1 Press MMuteN during a call. 14 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 14 2013/10/09 17:39:01 2 To return to the call, press MMuteN. Flash MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:
R To change the flash time, see page 25. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your service provider/telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed after you hear the call waiting tone on the handset. 1 Press MCALL WAITN to answer the 2nd 2 To switch between calls, press MCALL call. WAITN. Note:
R Please contact your service provider/
telephone company for details and availability of this service in your area. Temporary tone dialing (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. Making/Answering Calls R When this feature is turned on, Booster on is displayed. Handset noise reduction This feature allows you to hear the voice of the person you are talking to clearly, by reducing the surrounding noise coming from the other partys telephone. 1 Press MMenuN while talking. 2 MbN: Noise reduction on or Noise reduction off a MSelectN Note:
R Depending on the environment where this handset is being used, this feature may not be effective. R This feature is not available using the speakerphone. Handset equalizer This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. 1 Press MMenuN while talking. 2 MbN: Equalizer a MSelectN 3 MbN: Select the desired setting. 4 Press MOKN to exit. Note:
R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the speakerphone. Call share You can join an existing outside call. To join the conversation, press M the other handset is on an outside call. Note:
R A maximum of 3 parties (including 1 outside N when party) can join a conversation using 2 extensions. (3-way conference) For assistance, please visit http://www.panasonic.com/help 15 PRW120(en)_1009_ver031.pdf 15 2013/10/09 17:39:01 Note:
R When paging the handset, the paged handset beeps for 1 minute. R If you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call, press MOFFN, then press M N. R You can also select your smartphone in this feature using a handset, if your smartphone is registered to the base unit (page 42). Making an intercom call 1 MMenuN (right soft key) a MIntercomN 2 MbN: Select the desired unit. a MSelectN 3 When you finish talking, press MOFFN. Answering an intercom call 1 Press M N to answer the page. 2 When you finish talking, press MOFFN. Turning auto intercom on/off This feature allows the handset to answer intercom calls automatically when it is called. You do not need to press M feature is set to On, the monitoring handset for the baby monitor feature (page 31) will also answer baby monitor calls automatically. The default setting is Off. 1 MMenuN (right soft key) #273 2 MbN: Select the desired setting. a N. When this MSaveN a MOFFN Making/Answering Calls R To prevent other users from joining your conversations with outside callers, turn the call sharing mode off (page 25). Transferring calls, conference calls Outside calls can be transferred between 2 handsets in the same radio cell. 2 handsets in the same radio cell can have a conference call with an outside party. 1 During an outside call, press MMenuN. 2 MbN: Intercom a MSelectN 3 MbN: Select the desired unit. a MSelectN 4 Wait for the paged party to answer. R If the paged party does not answer, press MBackN to return to the outside call. 5 To complete the transfer:
Press MOFFN. To establish a conference call:
MMenuN a MbN: Conference a MSelectN R To leave the conference, press MOFFN. R To put the outside call on hold:
The other 2 parties can continue the conversation. MMenuN a MbN: Hold a MSelectN To resume the conference: MMenuN a MbN: Conference a MSelectN R To cancel the conference: MMenuN a MbN: Stop conference a MSelectN You can continue the conversation with the outside caller. Note:
R You can also select your smartphone in this feature using a handset, if your smartphone is registered to the base unit (page 42). Intercom Intercom calls can be made between handsets. 16 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 16 2013/10/09 17:39:01 Phonebook You can add 500 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group. The total number of entries that can be stored varies depending on how many phone numbers you have stored for each entry. Total number of entries is shown below*1:
1 name + 1 phone number: 500 entries 1 name + 2 phone numbers: 250 entries 1 name + 3 phone numbers: 166 entries
*1 Up to 3 phone numbers for each entry can be stored. Important:
R All entries can be shared by any registered handset. R You can copy contacts from your smartphone to the units phonebook if your smartphone is registered to the base unit. For more information, refer to the Smartphone Connect App Guide, which is available for download from our web site. Adding phonebook entries 1 MWN or MFN W a MMenuN 2 MbN: Add new entry a MSelectN 3 MbN: (Name) a MSelectN 4 Enter the partys name. a MOKN 5 MbN: (Phone no. 1) a MSelectN R You can store up to 3 phone numbers for each entry. 6 Enter the partys phone number. a MOKN 7 MbN: Group 1 a MSelectN 8 MbN: Select the desired group. a MSelectN 9 MSaveN a MOFFN Character table for entering names While entering characters, you can switch between uppercase and lowercase by pressing * (Aa). Phonebook Key 1 2 3 4 5 6 7 8 9 0
Character
. B A b a E D d e G H g h K J j k M N m n Q P q p U T t u W X x w 0
) H ,
1
2 C 2 c 3 F 3 f 4 I 4 i 5 L l 5 O 6 o 6 S R s r 8 V 8 v Y Z z y 9 9 7 7 R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 5 seconds after entering a character, the character is fixed and the cursor moves to the next space. R in the above table represents a single space. Erasing the character or number Press MFN or MEN. a MClearN R Press and hold MClearN to erase all characters or numbers. Storing a redial list number to the phonebook 1 MEN REDIAL For assistance, please visit http://www.panasonic.com/help 17 PRW120(en)_1009_ver031.pdf 17 2013/10/09 17:39:01 Phonebook 2 MbN: Select the desired phone number. a MDetailN a MSaveN 3 To store the name, continue from step 3, Editing entries, page 18. Storing caller information to the phonebook 1 MCN CID 2 MbN: Select the desired entry. a MDetailN R To edit the number: MMenuN a MbN:
Edit a MSelectN Press MEditN repeatedly until the phone number is shown in the desired format. And then, press MSaveN. Go to step 5. 3 MMenuN 4 MbN: Save CID a MSelectN 5 MbN: Phonebook a MSelectN 6 Continue from step 3, Editing entries, page 18. Groups Groups can help you find entries in the phonebook quickly and easily. You can change the names of groups (Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Changing group names/setting ringer ID 1 MWN or MFN W a MMenuN 2 MbN: Group a MSelectN 3 MbN: Select the desired group. a MSelectN 4 To change group names MbN: Group name a MSelectN a Edit the name (10 characters max.; page 17). a MSaveN To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSelectN a MbN:
Select the desired ringer tone. a MSaveN 5 MOFFN Finding and calling from a phonebook entry 1 MWN or MFN W 2 To scroll through all entries N MbN: Select the desired entry. a M To search by first character Press the dial key (0 to 9, or #) which contains the character you are searching for (page 17). MbN: Scroll through the phonebook if necessary. a M To search by query
* a To search for the name, enter the first characters (up to 4) in uppercase (page 17). a MOKN MbN: Scroll through the phonebook if necessary. a M To search by group N N MGroupN MbN: Select the desired group. a MSelectN MbN: Scroll through the phonebook if necessary. a M N 3 MbN: Select the desired phone number. a M N Editing entries 1 Find the desired entry (page 18). a 2 MbN: Edit a MSelectN 3 MbN: Select the desired item you want to MMenuN change. a MSelectN 4 To change the name and phone number:
Edit the name or phone number. a MOKN To change the group:
MbN: Select the desired group. a MSelectN To delete the picture:
MEraseN a MbN: Yes a MSelectN 5 MSaveN a MOFFN 18 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 18 2013/10/09 17:39:01 Erasing entries Erasing an entry 1 Find the desired entry (page 18). a 2 MbN: Erase a MSelectN 3 MbN: Yes a MSelectN a MOFFN MMenuN Erasing all entries 1 MWN or MFN W a MMenuN 2 MbN: Erase all a MSelectN 3 MbN: Yes a MSelectN 4 MbN: Yes a MSelectN a MOFFN Note:
R You can copy contacts from your smartphone to the units phonebook if your smartphone is registered to the base unit. Later, if you delete those phonebook entries from the unit, pictures that were attached to the entries will remain in the handset. You can erase these pictures manually using the Memory manager feature (page 25). Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MMenuN. 2 MbN: Phonebook a MSelectN 3 MbN: Select the desired entry. a MSelectN 4 MbN: Select the desired phone number. 5 Press MCallN to dial the number. Note:
R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 14). Phonebook R If you have rotary/pulse service, you need to press * (TONE) before pressing MMenuN in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * (TONE) to the beginning of phone numbers you wish to chain dial
(page 17). Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers:
key (1 to 9). a MAddN 1 Press and hold the desired speed dial 2 MbN: Manual a MSelectN 3 Enter the partys name (16 characters max.; page 17). a MOKN 4 Enter the partys phone number (24 digits max.). a MOKN a MSelectN a MOFFN n From the phonebook:
key (1 to 9). a MAddN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSelectN 3 MbN: Select the desired entry. a MSelectN 4 MbN: Select the desired phone number. 5 MSaveN a MOFFN Note:
R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. Editing an entry 1 Press and hold the desired speed dial key 2 MbN: Edit a MSelectN
(1 to 9). a MMenuN For assistance, please visit http://www.panasonic.com/help 19 PRW120(en)_1009_ver031.pdf 19 2013/10/09 17:39:01 Phonebook 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN a MSelectN a MOFFN Erasing an entry 1 Press and hold the desired speed dial key 2 MbN: Erase a MSelectN 3 MbN: Yes a MSelectN a MOFFN
(1 to 9). a MMenuN Viewing an entry/Making a call 1 Press and hold the desired speed dial key
(1 to 9). 2 To make a call, press M N. 20 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 20 2013/10/09 17:39:01 Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMenuN (right soft key) 2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a MSelectN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSelectN 4 Press MCN or MDN to select the desired setting. a MSaveN n Using the direct command code 1 MMenuN (right soft key) a Enter the desired code. Example: Press MMenuN (right soft key) #101. 2 Select the desired setting. a MSaveN Note:
R To exit the operation, press MOFFN. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display the menu tree and direct command code table Main menu:
Operation Viewing the caller list. Caller list Main menu:
Sub-menu 1 Message list Play new message Play all message Erase all message*1 Greeting Answering device Sub-menu 2 Record greeting*1 Check greeting Pre-recorded*1
(Reset to pre-recorded greeting) Settings Code
#213 Code
#329
#323
#324
#325
#302
#303
#304 34 37 37 37 38 36 36 36 For assistance, please visit http://www.panasonic.com/help 21 PRW120(en)_1009_ver031.pdf 21 2013/10/09 17:39:01 Programming Sub-menu 1 New message alert Settings Sub-menu 2 Outgoing call*1 On/Off Outgoing call*1 Notification to Outgoing call*1 Remote code Handset beep Ring count*1 Recording time*1 Remote code*1 Screen call Voice Mail access Answer on*1 Answer off*1 Main menu:
Operation Listening to voice mail messages. Intercom Main menu:
Operation Paging the desired unit. Set date & time Main menu:
Sub-menu 1 Date and time*1 Memo alarm Sub-menu 2 1-5: Alarm1-5 38 38 41 41 39 40 36 36 45 16 12 27 Settings 1: On 0: <Off>
Code
#338 1: Activate 0: <Inactivate>
1: On 0: <Off>
2-7: 2-7 rings 4: <4 rings>
0: Toll saver 1: 1 min 3: <3 min>
0: Greeting only*2
<111>
1: <On> 0: Off Settings 1: Once 2: Daily 3: Weekly 0: <Off>
1: <Caller ID auto>
0: Manual
#339
#211
#305
#306
#310
#327
#328 Code
#330 Code
#274 Code
#101
#720 Time adjustment*1, *3
#226 22 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 22 2013/10/09 17:39:01 Programming Settings Main menu:
Sub-menu 1 Ring adjustments Set date & time Talking Caller ID Handset name Key detector setting*6 1:Add new device 2:Add new device 3:Add new device 4:Add new device
(for Detector1)*7
(for Detector2)
(for Detector3)
(for Detector4) Call block*1 Speed dial Sub-menu 2 Ringer volume Ringer tone*4, *5 Silent mode On/Off Silent mode Start/End Silent mode Select group Date and time*1 Memo alarm 1-5: Alarm1-5 Time adjustment*1, *3 Change name*1 Registration Deregistration Settings 0-6: Off-6 <6>
<Tone 1>
1: On 0: <Off>
<11:00 PM/06:00 AM>
1-9: Group 1-9 1: Once 2: Daily 3: Weekly 0: <Off>
1: <Caller ID auto>
0: Manual 1: <On> 0: Off Detector1 Detector2*8 Detector3*8 Detector4*8 First ring*1 Block w/o num*1, *2
(Block calls without phone number) 1: <On> 0: Off 1: On 0: <Off>
Code
#160
#161
#238
#237
#241
#101
#720
#226
#162
#104
#6561
#6562*9
#6563*9
#6564*9
#6571
#6572*9
#6573*9
#6574*9
#6581
#6582*9
#6583*9
#6584*9
#217
#173
#240
#261 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 23 2013/10/09 17:39:01 28 28 28 12 27 34 31 28 29 29 19 23 Programming Sub-menu 1 Voice mail Display Sub-menu 2 Save VM access#*1
(VM: Voice mail) VM tone detect*1 Wallpaper Clock*10 Display color Display mode*11 Key backlight LCD backlight*12 LCD contrast
(Display contrast) Auto intercom Key tone Caller ID edit
(Caller ID number auto edit) Auto talk*13 Settings 1: <On> 0: Off
<Wallpaper1>
1: Analog(Small) 2: Analog(Large) 3: <Digital
(Large)>
4: Digital
(Small) 0: Off 1: <Color1>
2: Color2 1: <Multi items>
0: Single item 1: <On> 0: Off 1: <On> 0: Off 1-6: Contrast 1-6
<Contrast 3>
1: On 0: <Off>
1: <On> 0: Off 1: <On> 0: Off 1: On 0: <Off>
Code
#331
#332
#181
#198
#182
#192
#276
#191
#145
#273
#165
#214
#200 45 45 16 35 14 24 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 24 2013/10/09 17:39:01 Programming Sub-menu 1 Set tel line Call sharing*1, *16 Memory manager*17 Phone number setting*1, *18 Network settings Settings Sub-menu 2 1: Pulse Set dial mode*1 2: <Tone>
Set flash time*1, *14 0: 900 ms 1: <700 ms>
2: 600 ms 3: 400 ms 4: 300 ms 5: 250 ms G: 200 ms
#: 160 ms 6: 110 ms 7: 100 ms 8: 90 ms 9: 80 ms 1: A 2: <B>
1: <On> 0: Off Set line mode*1, *15 International code Country code Trunk prefix Current status Wi-Fi settings Code
#120
#121
#122
#194
#670
#117
#118
#119
#526
#523 Connect Search for networks WPS (Easy setting) Signal strength #537 Wi-Fi repeater
#538 1: On 0: <Off>
Auto (DHCP) Manual (Static) #500
#730
#130
#131
#680
#110 1: <English>
2: Espaol 1: <English>
2: Espaol
#112 Registration Customer support Change language IP settings Reset network Register handset Deregistration*2 Display Voice prompt*1 13 15 15 44 42 44 43 43 44 32 33 12 12 For assistance, please visit http://www.panasonic.com/help 25 PRW120(en)_1009_ver031.pdf 25 2013/10/09 17:39:01 Baby monitor Programming Main menu:
Sub-menu 1 On/Off Sensitivity level Sub-menu 2 Settings 1: On 0: <Off>
1: Low 2: <Middle>
3: High Calendar Main menu:
Operation Viewing the calendar and setting the schedule alarm. Sub-menu 2 Settings Key detector*6 Main menu:
Sub-menu 1 Search Battery check Main menu:
Sub-menu 1 Ringer volume Ringer tone*4, *5 Silent mode Ring adjustments*19 Sub-menu 2 On/Off Start/End Select group Settings 0-6: Off-6 <6>
<Tone 1>
1: On 0: <Off>
<11:00 PM/06:00 AM>
1-9: Group 1-9 Code
#268
#269 Code
#727 Code
#655 Code
#160
#161
#238
#237
#241 30 31 31 28 28 28
*1 If you program these settings using one of the handsets, you do not need to program the
*2 This menu is not displayed when scrolling through the display menus. It is only available in same item using another handset. direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 12). 2012 Copyrights Vision Inc. 2). If you select a melody, you cannot distinguish lines by their ringers.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
*5 The preset melodies in this product (Tone 3 - Melody 30) are used with permission of
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation
*7 For models with supplied key detectors, the display shows 1:Detector1.
*8 If you register 2 or more key detectors.
*9 If you have 2 or more key detectors. manual for more information on the key detector. 26 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 26 2013/10/09 17:39:02 Programming
*10 Wallpaper is displayed in the standby mode only when you select Digital(Small) or
*11 You can select to display either a single item or multiple items on one screen at a time for Off for this setting. the handset main menu icons in function menu, recorded message list, phonebook list, caller list, and redial list.
*12 You can set the handset display backlight while on charge. On: Backlight is on (dimmed). Off: Backlight turns off after 10 seconds of charging. the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.
*15 Generally, the line mode setting should not be changed. This setting automatically maintains
*13 If you subscribe to a Caller ID service and want to view the callers information after lifting up
*14 The flash time depends on your telephone exchange or host PBX. Contact your PBX receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. on.
*16 To prevent other users from joining your conversations with outside callers, turn this feature
*17 If you use your smartphone to copy images (used by your handsets as wallpaper patterns), pictures (attached to your smartphones contacts), or ringtones, you can confirm handset memory usage and erase unnecessary items to make more memory available. For more information, refer to the Smartphone Connect App Guide, which is available for download from our web site.
*18 If you store phone numbers in your smartphones contacts using the international dialing symbol + and the country code, we recommend that you store phone number conversion codes in the base unit. For more information, refer to the Smartphone Connect App Guide, which is available for download from our web site.
*19 This menu icon is displayed when the key detector is not registered. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be displayed for the alarm. A total of 5 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:
R Make sure the units date and time setting is correct (page 12). 1 MMenuN (right soft key) #720 2 Select an alarm by pressing 1 to 5. a MSelectN 3 MbN: Select the desired alarm option. a MSelectN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:
Enter the desired month and date. a MOKN For assistance, please visit http://www.panasonic.com/help 27 PRW120(en)_1009_ver031.pdf 27 2013/10/09 17:39:02 Programming n Weekly:
MbN: Select the desired day of the week and press MSelectN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN 7 Enter a text memo (30 characters max.). a MOKN 8 MbN: Select the desired alarm tone. a MSelectN R We recommend selecting a different ringer tone from the one used for outside calls. 9 MbN: Select the desired snooze setting. a MSelectN 10 MSelectN a MOFFN Note:
R Press MStopN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSnoozeN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each handset. Using the phonebooks group feature
(page 18), you can also select groups of callers whose calls override silent mode and ring the handset (Caller ID subscribers only). Important:
R Make sure the units date and time setting is correct (page 12). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMenuN (right soft key) #238 2 MbN: Select the desired setting. a MSaveN exit. wish to start this feature. R If you select Off, press MOFFN to 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSaveN a MOFFN Changing the start and end time 1 MMenuN (right soft key) #237 2 Continue from step 3, Turning silent mode on/off, page 28. Selecting groups to bypass silent mode 1 MMenuN (right soft key) #241 2 Select your desired groups by pressing 1 to 9. R group numbers. is displayed next to the selected R To cancel a selected group, press the disappears. same dial key again. 3 MSaveN a MOFFN Call block This feature allows the unit to reject calls when:
the unit receives a call from a phone number stored in the call block list as unwanted (Storing unwanted callers, page 29). the unit receives a call without phone number (Blocking incoming calls without phone number, page 29). When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the 28 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 28 2013/10/09 17:39:02 caller, and disconnects the call. (Caller ID subscribers only)
*1 This is called first ring. If you do not want the first ring to sound, turn this setting to Off (page 29). Important:
R When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list
(page 34) with after the call is disconnected. Storing unwanted callers You can store up to 100 phone numbers in the call block list. Important:
R You must store the phone number with an area code in the call block list. n From the caller list:
1 MCN CID 2 MbN: Select the entry to be blocked. a MDetailN R To edit the number: MMenuN a MbN: Edit a MSelectN Press MEditN repeatedly until the phone number is shown in the 10-digit format. And then, press MSaveN. Go to step 5. 3 MMenuN 4 MbN: Save CID a MSelectN 5 MbN: Call block a MSelectN 6 MbN: Yes a MSelectN 7 Edit the phone number if necessary
(24 digits max.). 8 MSaveN a MOFFN n By entering phone numbers:
1 MMenuN (right soft key) #217 2 MMenuN a MbN: Add a MSelectN 3 Enter the phone number (24 digits max.). 4 MSaveN a MOFFN Programming Blocking incoming calls without phone number You can reject a call when no phone number is provided, such as a call just showing Out of area. 1 MMenuN (right soft key) #240 2 MbN: Select the desired setting. a MSaveN 3 MOFFN Setting the first ring for the call block list If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to Off. The default setting is On. 1 MMenuN (right soft key) #173 2 MbN: Select the desired setting. a MSaveN 3 MOFFN Viewing/editing/erasing call block numbers 1 MMenuN (right soft key) #217 2 MbN: Select the desired entry. R To exit, press MOFFN. 3 To edit a number:
MEditN a Edit the phone number. a MSaveN a MOFFN To erase a number:
MEraseN a MbN: Yes a MSelectN a MOFFN Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset
(placed in a babys room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound. Important:
R You should perform a test run of the baby monitor procedure to ensure that the baby 29 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 29 2013/10/09 17:39:02 Programming monitor feature is set correctly. For example, test its sensitivity. Check the connection if you are diverting the baby monitor to an outside line. Note:
R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings during the monitoring mode. Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a babys room). To monitor with a handset The internal baby monitor feature is only available between handsets in the same radio cell. 1 MMenuN (right soft key) #268 2 MbN: On a MSelectN 3 MbN: Select the desired handset number to monitor with. a MSaveN R Baby monitor will be displayed. R The registered handset name/number is displayed. Note:
R You can also select your smartphone in this feature using a handset, if your smartphone is registered to the base unit (page 42). R When this feature is on, another handset can hear the monitored handset by making an intercom call. To monitor from an outside line n From the phonebook:
1 MMenuN (right soft key) #268 2 MbN: On a MSelectN 3 MbN: Select External to monitor from an outside line. a MEditN a MAddN 4 MbN: Phonebook a MSelectN 5 MbN: Select the phonebook entry. a MSelectN 6 MbN: Select the desired phone number. a MSaveN R Baby monitor will be displayed. Note:
R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers:
1 MMenuN (right soft key) #268 2 MbN: On a MSelectN 3 MbN: Select External to monitor from an outside line. a MEditN a MAddN 4 MbN: Manual a MSelectN 5 Enter the desired name. a MOKN 6 Enter the desired number. a MOKN a MSelectN R Baby monitor will be displayed. Note:
R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to On. 1 Press MMenuN on the handset being 2 MbN: On/Off a MSelectN 3 MbN: Off a MSelectN a MOFFN monitored. monitored. Editing an outside monitoring number 1 Press MMenuN on the handset being 2 MbN: On/Off a MSelectN 3 MbN: On a MSelectN 4 MbN: Select the outside line. a MEditN 5 MMenuN a MbN: Edit a MSelectN 6 Edit the name if necessary. a MOKN 30 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 30 2013/10/09 17:39:02 7 Edit the phone number if necessary. a MOKN a MSelectN monitored. Erasing an outside monitoring number 1 Press MMenuN on the handset being 2 MbN: On/Off a MSelectN 3 MbN: On a MSelectN 4 MbN: Select the outside line. a MEditN 5 MMenuN a MbN: Erase a MSelectN 6 MbN: Yes a MSelectN a MOFFN Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. monitored. 1 Press MMenuN on the handset being 2 MbN: Sensitivity level a 3 MbN: Select the desired setting. a MSelectN MSaveN a MOFFN Answering the baby monitor n When monitoring with a handset:
N to answer calls. Press M If you want to respond from the monitoring handset, press MMuteN. R The monitoring handset will answer calls automatically when the auto intercom feature is set to On (page 16). Note:
R If you receive an outside call when communicating with the monitored handset, you hear 2 tones. To answer the call, press MOFFN, then press M N. n When monitoring from an outside line:
To answer a call, follow the operation for your phone. Programming If you want to respond from the monitoring handset, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note:
R 2 minutes after the monitored handset starts a call, communication between the monitored handset and monitoring phone line is turned off automatically. Other programming Changing the handset name Each handset can be given a customized name (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is No. If you select Yes without entering any handset name, Handset 1 to Handset 6 is displayed. 1 MMenuN (right soft key) #104 2 Enter the desired name (max. 10 characters). 3 MSaveN 4 MbN: Select the desired setting. a MSelectN 2 times a MOFFN Calendar/Schedule You can program 20 schedule alarms for each handset using the calendar. A schedule alarm sounds at the set time for 1 minute. A text memo can also be displayed for the schedule alarm. Important:
R Make sure the units date and time setting is correct (page 12). Adding a new entry 1 MMenuN (right soft key) a a MSelectN 2 MbN: Select the desired date. a MSelectN For assistance, please visit http://www.panasonic.com/help 31 PRW120(en)_1009_ver031.pdf 31 2013/10/09 17:39:02 MSelectN Programming 3 MMenuN a MbN: Add new entry a 4 Edit the date if necessary. a MOKN 5 Set the desired time. a MOKN 6 Enter a text memo (30 characters max.;
page 17). a MOKN 7 MbN: Select the desired alarm tone. a MSelectN 2 times R You can select Off if you prefer not R We recommend selecting a different to hear an alarm tone. ringer tone from the one used for outside calls. 8 MOFFN Note:
R To stop the alarm, press MStopN or place the handset on the base unit or charger. R When the handset is in use, the alarm will not sound until the handset is in standby mode. Viewing entries 1 MMenuN (right soft key) a a MSelectN 2 To see the entries on the selected date, press MSelectN. To see the schedule list, press MListN. R You can see detailed information about the schedule by pressing MMenuN. a MbN: Detail a MSelectN Editing an entry 1 MMenuN (right soft key) a a MSelectN 2 MListN a MbN: Select the desired entry. 3 MMenuN a MbN: Edit a MSelectN 4 Edit the date if necessary. a MOKN 5 Edit the time if necessary. a MOKN 6 Edit the text memo if necessary (30 characters max.). a MOKN 7 MbN: Select the desired alarm tone. a MSelectN 2 times a MOFFN Erasing an entry Schedule alarm entries are not erased automatically after the schedule alarm sounds. Erase unwanted entries. 1 MMenuN (right soft key) a a MSelectN 2 MListN a MbN: Select the desired entry. 3 MMenuN a MbN: Erase a MSelectN 4 MbN: Yes a MSelectN a MOFFN Erasing all entries 1 MMenuN (right soft key) a a MSelectN 2 MListN a MMenuN 3 MbN: Erase all a MSelectN 4 MbN: Yes a MSelectN 5 MbN: Yes a MSelectN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:
R The additional handset model recommended for use with this unit is noted on page 4. If another handset model is used, certain operations may not be available. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit (for example, is displayed even when the handset is near the base unit), re-register the handset. 1 Handset:
MMenuN (right soft key) #130 32 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 32 2013/10/09 17:39:02 Programming Press and hold M N for about 5 seconds. R If all registered handsets start ringing, N again to stop, then repeat 2 Base unit:
press M this step. 3 Handset:
Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. 1 MMenuN (right soft key) #131 R All handsets registered to the base unit are displayed. cancel. a MSelectN 2 MbN: Select the handset you want to 3 MbN: Yes a MSelectN 4 MOFFN For assistance, please visit http://www.panasonic.com/help 33 PRW120(en)_1009_ver031.pdf 33 2013/10/09 17:39:02 Caller ID Service Using Caller ID service Important:
R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/telephone company for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:
Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Missed calls If a call is not answered, the unit treats it as a missed call and Missed call is displayed. This lets you know if you should view the caller list to see who called while you were away. Even if only one missed call in the caller list is viewed (page 34), Missed call disappears from the display. When you receive another new call, Missed call is displayed again. Note:
R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the registered handsets:
Being replaced on the base unit or charger. Pressing MOFFN. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Talking Caller ID This feature lets you know who is calling without looking at the display. To use this feature, you must:
subscribe to a Caller ID service of your service provider/telephone company. turn this feature on (page 23). When caller information is received, the handsets announce the callers name or phone number received from your service provider/telephone company following every ring. The unit announces in English only. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:
R Make sure the units date and time setting is correct (page 12). Viewing the caller list and calling back 1 MCN CID 34 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 34 2013/10/09 17:39:02 2 Press MCN to search from the most recent call, or press MDN to search from the oldest call. R You can see the detailed information about the caller by pressing MDetailN when in multiple display mode. 3 To call back, press M To exit, press MOFFN. N. Note:
R If the entry has already been viewed or answered, is displayed. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. 1 MCN CID 2 MbN: Select the desired entry. a MDetailN 3 MMenuN a MbN: Edit a MSelectN 4 Press MEditN repeatedly until the phone number is shown in the desired format. N 5 M Note:
R The number edited in step 4 will not be saved in the caller list. Caller ID Service To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit
(page 24). The default setting is On. Note:
R Phone numbers from the 4 most recently edited area codes are automatically edited. Erasing selected caller information 1 MCN CID 2 MbN: Select the desired entry. 3 MEraseN a MbN: Yes a MSelectN a MOFFN Erasing all caller information 1 MCN CID 2 MEraseN a MbN: Yes a MSelectN a MOFFN Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:
When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. For assistance, please visit http://www.panasonic.com/help 35 PRW120(en)_1009_ver031.pdf 35 2013/10/09 17:39:02 Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 41). Important:
R Make sure the units date and time setting is correct (page 12). Memory capacity (including your greeting message) The total recording capacity is about 40 minutes. A maximum of 64 messages can be recorded. Note:
R When message memory becomes full:
Messages full is shown on the If you use the pre-recorded greeting handset display. message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off The answering system is preset to on. 1 To turn on:
MMenuN (right soft key) #327 To turn off:
MMenuN (right soft key) #328 2 MOFFN Note:
R When the answering system is turned on, is displayed. Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:
your own greeting message a pre-recorded greeting message Recording your greeting message 1 MMenuN (right soft key) #302 2 MbN: Yes a MSelectN 3 After a beep sounds, hold the handset about 20 cm away and speak clearly into the microphone (2 minutes max.). 4 Press MStopN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:
If you erase or do not record your own If the message recording time (page 41) greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. Resetting to a pre-recorded greeting message If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. 1 MMenuN (right soft key) #304 2 MYesN a MOFFN Playing back the greeting message 1 MMenuN (right soft key) #303 36 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 36 2013/10/09 17:39:02 2 To exit, press MOFFN. Listening to messages When new messages have been recorded, New message is displayed on the handset. 1 To listen to new messages:
MPlayN*1 or MMenuN (right soft key) #323 To listen to all messages:
MMenuN (right soft key) #324 2 When finished, press MOFFN
*1 If there are no new messages in the answering system, MPlayN is not displayed. Note:
R To switch to the receiver, press M N. Listening to messages from the message list You can select the item to play back. 1 MMenuN (right soft key) #329 2 MbN: Select the desired item from the message list. a MPlayN R You can erase the selected message as follows:
MMenuN a MbN: Erase a MSelectN a MbN: Yes a MSelectN 3 When finished, press MOFFN Note:
R If the item has already been heard, displayed, even if it was heard using another handset. R Message is displayed in the message list if the unit cannot receive caller information. is Operating the answering system a MSelectN MMenuN (right soft key) a Key MDN or MCN Operation Adjust the receiver or speaker volume (during playback) Key 1 or MFN 2 or MEN 3 4 5 6 76 8 MPauseN 9 or MStopN 0
*4*4
*5
*6 Answering System Operation Repeat message
(during playback)*1 Skip message
(during playback)*2 Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Pause message*3 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages Reset to a pre-recorded greeting message
*1 If pressed within the first 5 seconds of a message, the previous message is played except when playing back from the message list.
*3 To resume playback:
*2 When you play a message from the message list, the unit stops message playback and the display goes back to the message list. MbN: Playback a MSelectN
*4 You can also erase as follows:
MPauseN a MbN: Erase a MSelectN a MbN: Yes a MSelectN Rewinding the message Press and hold MFN until the unit plays the desired part of the message. R During rewinding, the handset makes a continuous beeping sound. Rewinding speed may vary depending on the recorded message. R At the beginning of the message, the unit plays the message at normal speed. For assistance, please visit http://www.panasonic.com/help 37 PRW120(en)_1009_ver031.pdf 37 2013/10/09 17:39:03 Answering System Fast-forwarding the message Press and hold MEN until the unit plays the desired part of the message. R During fast-forwarding, the handset makes a continuous beeping sound. Fast-forwarding speed may vary depending on the recorded message. R Even if you press and hold MEN when the end of this message is played, the next message is played at normal speed. Calling back (Caller ID subscribers only) 1 Press MPauseN during playback. 2 MbN: Call back a MSelectN Editing the number before calling back 1 Press MPauseN during playback. 2 MbN: Edit & Call a MSelectN 3 Press MEditN repeatedly until the phone number is shown in the desired format
(page 35). a M N Erasing all messages 1 MMenuN (right soft key) #325 2 MbN: Yes a MSelectN a MOFFN Advanced new message alerting features Audible message alert This feature allows the handset to beep to inform you of a new message arrival when new messages are recorded. The handset beeps 2 times every minute until you listen to the messages, if the Handset beep setting is turned on. The default setting is Off. 1 MMenuN (right soft key) #339 2 MbN: Select the desired setting. a MSaveN a MOFFN New message alert by a call This feature allows you to receive a notification by phone when new messages are recorded. The base unit calls a phone number you specify. You can then operate the answering system remotely to listen to the new message. To use this feature, you must:
store a phone number to which the unit makes the call to. turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call
(page 39). Important:
R A new message alert is stopped 1 minute after the unit starts to call. The unit will not retry the call even if the call is not answered. Storing a phone number to which the unit makes an alert call n From the phonebook:
1 MMenuN (right soft key) #338 2 MbN: Notification to a 3 MbN: Phonebook a MSelectN 4 MbN: Select the desired phonebook MSelectN a MAddN entry. a MSelectN 5 MbN: Select the desired phone number. a MSaveN a MOFFN n By entering a phone number:
1 MMenuN (right soft key) #338 2 MbN: Notification to a 3 MbN: Manual a MSelectN 4 Enter the desired name (16 characters MSelectN a MAddN max.). a MOKN 5 Enter the desired number (24 digits max.). a MOKN a MSelectN a MOFFN 38 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 38 2013/10/09 17:39:03 Turning on/off the new message alert setting 1 MMenuN (right soft key) #338 2 MbN: On/Off a MSelectN 3 MbN: Select the desired setting. a MSaveN a MOFFN Editing the set phone number 1 MMenuN (right soft key) #338 2 MbN: Notification to a MSelectN 3 MMenuN a MbN: Edit a MSelectN 4 Edit the name if necessary (16 characters max.). a MOKN 5 Edit the phone number if necessary (24 digits max.). a MOKN a MSelectN a MOFFN Erasing the set phone number 1 MMenuN (right soft key) #338 2 MbN: Notification to a MSelectN 3 MMenuN a MbN: Erase a MSelectN 4 MbN: Yes a MSelectN a MOFFN R The new message alert setting is turned off. Activating/inactivating the remote access code to play messages If you activate this feature, you must enter the remote access code (page 39) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is Inactivate. Inactivate: You can listen to the message by pressing 4 to play new messages (without entering the remote access code). Activate: You must enter your remote access code (page 39) and then press 4 to play new message. 1 MMenuN (right soft key) #338 2 MbN: Remote code a MSelectN Answering System 3 MbN: Activate or Inactivate a MSaveN a MOFFN Listening to messages After you answer the new message alert, you can listen to the messages as follows. n When the remote access code is set to Inactivate:
Press 4 to play the new message during the announcement. Activate:
1 Enter the remote access code n When the remote access code is set to
(page 39) during the announcement. 2 Press 4 to play the new message. Note:
R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show the record. Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:
R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMenuN (right soft key) #306 For assistance, please visit http://www.panasonic.com/help 39 PRW120(en)_1009_ver031.pdf 39 2013/10/09 17:39:03 Answering System 2 Enter the desired 3-digit remote access code. 3 MSaveN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 39. R The entered remote access code is deleted. Key 1 2 4 5 9 Using the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 After the greeting message starts, enter your remote access code. 3 Follow the voice guidance prompts as necessary or control the unit using remote commands (page 40). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 40). Note:
R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Operation Repeat message
(during playback)*1 Skip message
(during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0
*4 Erase currently playing message
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only Turning on the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 39). Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the handsets speaker. To adjust the speaker volume, press MDN or MCN repeatedly. You can answer the call by pressing M N on the handset. Call 40 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 40 2013/10/09 17:39:03 Answering System telephone company does. It is necessary to check the number of rings required to activate the voice mail service provided by your service provider/telephone company before changing this setting. Change the number of rings of the voice mail service so that the answering system can answer the call first. To do so, contact your service provider/
telephone company. Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. 1 MMenuN (right soft key) #305 2 MbN: Select the desired setting. a MSaveN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 41. Note:
R When you select Greeting only:
the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 36). screening can be set for each handset. The default setting is On. 1 MMenuN (right soft key) #310 2 MbN: Select the desired setting. a MSaveN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 40), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 MMenuN (right soft key) #211 2 MbN: Select the desired setting. a MSaveN a MOFFN For voice mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, call waiting, voice mail, and unlimited local/regional/long distance calls, please note the following:
R To use the voice mail service provided by your service provider/telephone company rather than the units answering system, turn off the answering system (page 36). R To use this units answering system rather than the voice mail service provided by your service provider/telephone company, please contact your service provider/
telephone company to deactivate your voice mail service. If your service provider/telephone company cannot do this:
Set this units Ring count setting so that this units answering system answers calls before the voice mail service of your service provider/
For assistance, please visit http://www.panasonic.com/help 41 PRW120(en)_1009_ver031.pdf 41 2013/10/09 17:39:03 Smartphone Integration Smartphone integration You can install the free Smartphone Connect app on your smartphone and use your smartphone as an extension of your phone system. The following features are available when using the app. Making and receiving calls using your landline Making and receiving intercom calls Playing answering system messages Checking your call log Copying phonebook entries from your smartphone to your phone system Transferring landline calls between your smartphone and your handsets Copying images from your smartphone to your handsets to be used as wallpaper patterns
(Android version only) Copying the ringtone from your smartphone to your handsets (Android version only) Requirements R iPhone 4, iPhone 4S, iPhone 5, iPad, or iPad mini (iOS 5.0 or later) or An Android device (Android 4.0 or later) R The Smartphone Connect app (see page 43) R A wireless router (IEEE 802.11g or IEEE 802.11n recommended) R You must configure both your base unit and your smartphone to connect wirelessly to your home network via your wireless router. R In order to use most of the apps features, your smartphone needs to be connected to the same wireless router as your base unit.
(You cannot use these features while away from home.) Functionality information R The app may not function properly depending on system environment, such as your smartphone model, peripherals connected to your smartphone, and the apps installed on your smartphone. Trademarks R Android is a trademark of Google Inc. R iPhone and iPad are registered trademarks of Apple Inc. Alliance. R Wi-Fi is a registered mark of the Wi-Fi R All other trademarks identified herein are the property of their respective owners. Network settings Before you begin Confirm the following before you configure the base unit to connect wirelessly to your home network. R Make sure your wireless router is turned on and functioning. R Make sure that you know your wireless routers Wi-Fi settings, including its SSID
(wireless network name), security password, etc. In some situations, you may also need to know the IP-related settings required in order for the base unit to connect to your wireless router, including your wireless routers IP address, subnet mask, etc. R Make sure you have the operating instructions included with your wireless router handy. Typical configuration (DHCP) 1 MMenuN (right soft key) #523 2 MbN: Search for networks a MSelectN R The base unit searches for available R When searching is complete, a list of wireless networks and Searching... is displayed. available wireless networks is displayed, including the SSID, security setting, and signal strength. R The base unit cannot find your wireless router if the wireless router does not broadcast its SSID. If there is a stealth mode setting, turn it off; if there is a SSID broadcast setting, turn it on. Change the appropriate setting before 42 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 42 2013/10/09 17:39:03 performing this procedure, and then change it back when finished. 3 MbN: Select your wireless routers SSID. a MSelectN 4 Confirm the SSID and then press MOKN. 5 Enter the password required to access the wireless network. a MOKN R After the base unit connects to the wireless router, Connected to and your wireless routers SSID is displayed. 6 MOFFN Simplified configuration (WPS, DHCP) This procedure requires a wireless router that supports WPS. If your wireless router supports WPS, make sure the feature is turned on, and locate its WPS button before beginning this procedure. The WPS button is typically labeled WPS or has two curved arrows on it. 1 MMenuN (right soft key) #523 2 MbN: WPS (Easy setting) a 3 Press the WPS button on your wireless MSelectN router and then press MOKN on the handset. R The base unit searches for your wireless router and Searching... is displayed. R After the wireless router is found, the base units Wi-Fi settings will be completed automatically. When the setup is complete, Connected to and your wireless routers SSID is displayed. 4 MOFFN Advanced configuration (static IP settings) After using the procedure explained in Typical configuration (DHCP), page 42 or Simplified configuration (WPS, DHCP), page 43, use the procedure below to set the base units IP settings manually if necessary. Smartphone Integration This procedure is not necessary for most users. 1 MMenuN (right soft key) #500 2 MbN: Manual (Static) a MSelectN 3 MbN: Select the desired item. a MSelectN 4 Enter the desired setting. a MOKN R Press MFEN to move the cursor if necessary. 5 Set the other items as necessary. 6 MbN: <Save> a MSelectN a MOFFN Smartphone Connect app Once you have configured the base units Wi-Fi and network settings, you are ready to download the Smartphone Connect app. Download information is available at the web page listed below. www.panasonic.net/pcc/support/tel/air For information about using the app, refer to the Smartphone Connect App Guide, which is available for download at the web page listed above. Other network features Wi-Fi repeater mode You can increase the signal range of your wireless network by turning on the base units Wi-Fi repeater mode feature. 1 MMenuN (right soft key) #538 2 MbN: Select the desired setting. a MSaveN Important:
R If using Wi-Fi repeater mode, do not place the base unit and your wireless router too close to each other. If they are too close, For assistance, please visit http://www.panasonic.com/help 43 PRW120(en)_1009_ver031.pdf 43 2013/10/09 17:39:03 Smartphone Integration using Wi-Fi repeater mode can cause the sound to cut out briefly during landline calls. R Do not use Wi-Fi repeater mode if you already have a Wi-Fi range extender. If you already have a Wi-Fi range extender, using Wi-Fi repeater mode can cause network problems such as not being able to access the Internet, and the sound may cut out briefly during landline calls. Confirming network status 1 MMenuN (right soft key) #526 2 MbN and MFEN: Display the desired information. a MOFFN Confirming your wireless routers Wi-Fi signal strength 1 MMenuN (right soft key) #537 2 Confirm the signal strength. a MOFFN Resetting the base units network settings All network-related settings will be reset to the default settings. No other information will be deleted. 1 MMenuN (right soft key) #730 2 MbN: Select the desired setting a MSelectN. 44 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 44 2013/10/09 17:39:03 Voice mail service Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone companys voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please contact your service provider/telephone company for details of this service. Important:
R To use the voice mail service provided by your service provider/telephone company rather than the units answering system, turn off the answering system (page 36). For details, see page 41. Storing the voice mail (VM) access number In order to listen to your voice mail messages, you must dial your service provider/telephone companys voice mail access number. Once you have stored your voice mail access number, you can dial it automatically
(page 45). 1 MMenuN (right soft key) #331 2 Enter your access number (24 digits max.). a MSaveN a MOFFN Note:
R When storing your voice mail access number and your mailbox password, press MDN (Pause) to add pauses (page 14) between the access number and the password as necessary. Contact your service provider/telephone company for the required pause time. Example:
Useful Information To erase the voice mail access number 1 MMenuN (right soft key) #331 2 Press and hold MClearN until all digits are erased. a MSaveN a MOFFN Voice mail (VM) tone detection Your service provider/telephone company sends special signals (sometimes called voice mail tones or stutter tones) to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded. Turn this feature off when:
You do not subscribe to voice mail service. Your service provider/telephone company N, you have new voice mail does not send voice mail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your service provider/telephone company. Turning VM tone detection on/off The default setting is On. 1 MMenuN (right soft key) #332 2 MbN: Select the desired setting. a MSaveN a MOFFN Listening to voice mail messages The unit lets you know that you have new voice mail messages in the following way:
New Voice Mail is displayed if 1 MVMN*1 message indication service is available. or MMenuN (right soft key) #330 R The speakerphone turns on. 2 Follow the pre-recorded instructions. 3 When finished, press MOFFN. For assistance, please visit http://www.panasonic.com/help 45 PRW120(en)_1009_ver031.pdf 45 2013/10/09 17:39:03 1-222-333-4444VM access numberPausesPasswordPPPP8888 Useful Information
*1 If there are no new messages in the voice mail, MVMN is not displayed. Note:
R If the handset still indicate there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Error messages Display message Ask phone company for VM access #
Base no power orNo link to base. Reconnect main base AC adaptor. Busy Check tel line Error!!
Invalid Memory full Requires subscription to Caller ID. Use rechargeable battery. Cause/solution R You have not stored the voice mail access number. Store the number (page 45). R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handsets registration may have been canceled. Re-register the handset (page 32). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 9). R Recording was too short. Try again. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 32). R The phonebook memory is full. Erase unwanted entries
(page 19).
(page 37).
(page 29).
(page 32). R Message memory is full. Erase unwanted messages R The call block list memory is full. Erase unwanted entries R The schedule alarm memory is full. Erase unwanted entries R Handset memory is full. Erase unwanted wallpaper images, photos, or ringtones (page 25). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 3, 6. 46 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 46 2013/10/09 17:39:03 Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. The handset display is blank or dark. I cannot hear a dial tone. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 9). R Fully charge the batteries (page 10). R Check the connections (page 9). R Unplug the base units AC adaptor to reset the unit. Reconnect R The handset has not been registered to the base unit. Register the adaptor and try again. the handset (page 32). R The handset is in screen saver mode (page 12). Activate the handset display again by:
pressing M pressing MOFFN at all other times. N when on a call. R LCD backlight is set to Off while on charge. Change the setting (page 24). R Make sure that you are using the supplied telephone line cord. Your old telephone line cord may have a different wiring configuration. R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company. The handset beeps. The handset display begins operating automatically. R New messages have been recorded. Listen to the new messages (page 37). R Demonstration mode is activated. Remove the batteries from the handset, and then insert the batteries into the handset again. Menu list Problem The display is in a language I cannot read. Cause/solution R Change the display language (page 12). For assistance, please visit http://www.panasonic.com/help 47 PRW120(en)_1009_ver031.pdf 47 2013/10/09 17:39:04 Useful Information Problem I cannot display the wallpaper. I cannot register a handset to a base unit. Battery recharge Problem The handset beeps and/or flashes. I fully charged the batteries, but still flashes, is displayed, or the operating time seems to be shorter. Cause/solution R Wallpaper is displayed in the standby mode only when you select Digital(Small) or Off for the clock setting. Change the clock setting (page 24). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 33). Cause/solution R Battery charge is low. Fully charge the batteries (page 10). R Clean the battery ends (
, a dry cloth and charge again. R It is time to replace the batteries (page 9).
) and the charge contacts with Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it
(page 32). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The wireless network is congested. When using a smartphone to talk on landline calls (page 42), sound may cut out if large amounts of data are transmitted over the wireless network, such as when streaming video, downloading or uploading large files, etc. R The base units Wi-Fi repeater mode feature is turned on and the base unit is too close to your wireless router. Turn Wi-Fi repeater mode off (page 43), or place the base unit and your wireless router further from each other. R The base units Wi-Fi repeater mode feature is turned on and you are also using a Wi-Fi range extender. Do not use Wi-Fi repeater mode if you already have a Wi-Fi range extender. 48 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 48 2013/10/09 17:39:04 Useful Information Problem The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 14, Cause/solution I cannot make a call. I cannot make long distance calls. R Silent mode is turned on. Turn it off (page 28). R The dialing mode may be set incorrectly. Change the setting 23).
(page 13). R Make sure that you have long distance service. Caller ID/Talking Caller ID Problem Caller information is not displayed. Caller information is displayed or announced late. Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. Cause/solution R You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. R If your unit is connected to any additional telephone equipment, remove and plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service may not be available in some areas. Contact your service provider/telephone company for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. R Depending on your service provider/telephone company, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. R The handset ringer volume is turned off. Adjust it (page 14, 23). R The Talking Caller ID feature is turned off. Turn it on (page 23). R The number of rings for the answering system is set to 2 rings or Toll saver. Select a different setting (page 41). R The Caller ID number auto edit feature is turned off. Turn it on R You need to call back the edited number to activate Caller ID and try again (page 24). number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern
(page 35). time. Set the time adjustment to Manual (off) (page 23). R Incorrect time information from incoming Caller ID changes the For assistance, please visit http://www.panasonic.com/help 49 PRW120(en)_1009_ver031.pdf 49 2013/10/09 17:39:04 Useful Information Problem The 2nd callers information is not displayed during an outside call. Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. The unit does not emit the specified number of rings. Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R In order to use Caller ID, call waiting, or Call Waiting Caller ID
(CWID), you must first contact your service provider/telephone company and subscribe to the desired service. After subscribing, you may need to contact your service provider/telephone company again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). Cause/solution R The answering system is turned off. Turn it on (page 36). R The message memory is full. Erase unwanted messages R The recording time is set to Greeting only. Change the R If you subscribe to a voice mail service, messages are setting (page 41).
(page 38). recorded by your service provider/telephone company, not your telephone. Change the units number of rings setting or contact your service provider/telephone company (page 41). R The remote access code is not set. Set the remote access code (page 39). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 39). R The answering system is turned off. Turn it on (page 40). R If the first ring is turned off, the number of rings decreases by 1 from the specified number of rings. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process. 50 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 50 2013/10/09 17:39:04 Useful Information Network connection troubleshooting Problem I am having trouble connecting. Cause/solution R Your wireless router is not turned or is not functioning. Refer to the operating instructions included with your wireless router. R Your smartphone is not connected to your wireless router. Check your smartphones Wi-Fi settings. Refer to the operating instructions included with your smartphone. R The SSID (wireless network name), security type, or password assigned to the wireless router has been changed. Configure the base unit again using the procedure described in Typical configuration (DHCP), page 42 or Simplified configuration
(WPS, DHCP), page 43. R Confirm the base units Wi-Fi and IP settings using the procedure described in Confirming network status, page 44. R If your wireless routers client isolation feature (a feature that prevents wireless devices connected to the same wireless router from communicating with each other) is turned on, your base unit and your smartphone will not be able to communicate with each other. Refer to the operating instructions included with your wireless router and make sure that this feature is turned off. R The base units network settings are incorrect. Reset the base units network settings (page 44) and configure the network settings again. My smartphone and other devices cannot access the Internet since I turned on Wi-Fi repeater mode. R Do not use Wi-Fi repeater mode (page 43) if you already have a Wi-Fi range extender. For assistance, please visit http://www.panasonic.com/help 51 PRW120(en)_1009_ver031.pdf 51 2013/10/09 17:39:04 Useful Information Problem Failed to connect is displayed. Wrong password is displayed. IP address conflicts is displayed. Cannot obtain IP address is displayed. Cause/solution If you selected Search for networks when configuring the base unit R You entered the wrong password when configuring the base unit to connect to your wireless router. Confirm the password and try again. If your wireless router is configured to use a hexadecimal password, enter the correct password using numbers 0-9 and letters a-f. If you selected WPS (Easy setting) when configuring the base unit R Your wireless router uses WEP encryption. Configure the wireless router to use another type of encryption, such as WPA2-PSK (AES) encryption, and try again. R Your wireless routers stealth mode feature is turned on, or its SSID broadcast feature is turned off. Change this setting before configuring the base unit to connect to your wireless router, and then change it back when finished. If you have configured your wireless router to use MAC address filtering R Make sure you add the base units MAC address to the list of authorized MAC addresses. If the base units Wi-Fi repeater mode feature is turned on, the base unit has two MAC addresses (<MAC addr.(Client)> and <MAC addr.
(AP)>). Add them both to the list. R You entered the wrong password when configuring the base unit to connect to your wireless router. Confirm the password and try again. R The IP address assigned to the base unit is also assigned to another device on your network. Check the IP address settings of the base unit and other devices on the network. R Your wireless router does not support DHCP, or the DHCP feature of your wireless router is turned off. If your wireless router supports DHCP, make sure that its DHCP feature is turned on. If DHCP is not available, set the base units IP settings manually. See Advanced configuration (static IP settings), page 43. 52 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 52 2013/10/09 17:39:04 FCC and other information Useful Information For assistance, please visit http://www.panasonic.com/help 53 PRW120(en)_1009_ver031.pdf 53 2013/10/09 17:39:04 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information 54 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 54 2013/10/09 17:39:04 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearbyTVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Gua Rpida Espaola Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 55 PRW120(en)_1009_ver031.pdf 55 2013/10/09 17:39:04 ConexionesInstalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tLNO utilice bateras Alcalinas, de Manganeso o de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla (pgina56).LConfirme que aparezca Unidad base1 Presione el enchufe del adaptador de corriente alterna firmemente en la unidad.2 Mantenga el enchufe en posicin horizontal y ganche el cable para sujetarlo.3 Conecte el adaptador de corriente alterna a la toma de corriente.4 Conecte el cable de la lnea telefnica a la unidad y a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.Nota:LUse solo el adaptador de corriente alterna Panasonic PNLV236 que se suministra.23144512amao AAA (R03) ().1 (2).Cargando Gua Rpida Espaola 56 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) PRW120(en)_1009_ver031.pdf 56 2013/10/09 17:39:04 Sugerencias de operacinTeclas de funcinTecla navegadora{^}, {V}, {<} o {>}: Navegue por diversas listas y elementos.? (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.{V} CID (identificador de llamadas): Vea la lista de personas que llamaron.{<} k: Vea la entrada del directorio telefnico.{>} REDIAL (Remarcacin): Vea la lista de remarcacin.Cambio de idiomas (Auricular) (predeterminado: English)Idioma de la pantalla{Men} (tecla de funcin de la derecha) (11) s {r}: Espaol sIdioma de la gua de voz{Men} (tecla de funcin de la derecha) (112 s {r}: Espaol sFecha y hora (Auricular)1{} (tecla de funcin de la derecha) (1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales.4{V}{^}{<}{>}Men {Guardar} s {OFF} {Guardar} s {OFF} {Guardar} s {OFF} Cuando instale las bateras por primera vez, es posible que aparezca Date and time Press [Select]. Oprima {OFF} para salir.Al oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin. Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 57 PRW120(en)_1009_ver031.pdf 57 2013/10/09 17:39:04 Operaciones bsicasCmo hacer y contestar llamadas (Auricular)Para hacer llamadasMarque el nmero telefnico. s {C}/{s}Para contestar llamadas{C}/{s}Para colgar{OFF}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin{>} REDIAL s {r}: Seleccione el nmero telefnico deseado. s {C}Volumen del timbre del auricularOprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra.Directorio telefnico (Auricular)Cmo agregar entradas al directorio telefnico1{k} o {<} k s {Men}2{r}: Agregar Ent. Nueva s {Selec.}3{r}: (Nombre) s {Selec.}4Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}5{r}: LPuede almacenar hasta 3 nmeros telefnicos por cada entrada.6Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK}7{r}: Grupo 1 s {Selec.}8{r}: Seleccione el grupo deseado. s {Selec.}9{Guardar} s {OFF}Para hacer llamadas1{k} o {<} k2{r}: Seleccione la entrada deseada. s {C}3{r}: Seleccione el nmero telefnico deseado. s {C}Sistema contestador de llamadas (Auricular)Para escuchar mensajesPara escuchar mensajes nuevos:{Reproducir} o {Men} (tecla de funcin de la derecha) (323Para escuchar todos los mensajes:{Men} (tecla de funcin de la derecha) (324(Nm Telfono 1) s {Selec.}Gua Rpida Espaola 58 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) PRW120(en)_1009_ver031.pdf 58 2013/10/09 17:39:04 Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {Men} (tecla de funcin de la derecha) (13)2Unidad base: Oprima y mantenga oprimido {x} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de navegacin {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base, llame a soporte al cliente de Panasonic al 1-800-211-PANA (1-800-211-7262).Es posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-PRWA10), visite: http://www.pstc.panasonic.com o llame al 1-800-332-5368. Los usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-866-605-1277.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (segunda llamada)?LOprima {CALL WAIT} cuando escuche el tono de llamada en espera. Customer services Appendix For assistance, please visit http://www.panasonic.com/help 59 PRW120(en)_1009_ver031.pdf 59 2013/10/09 17:39:04 Customer Services Directory (United States and Puerto Rico)Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:http://www.panasonic.com/helpor, contact us via the web at: http://www.panasonic.com/contactinfoYou may also contact us directly at: 1-800-211-PANA (1-800-211-7262),Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.For hearing or speech impaired TTY users, TTY: 1-877-833-8855For hearing or speech impaired TTY users, TTY: 1-866-605-1277Purchase Parts, Accessories and Owners Manual online for all Panasonic Products by visiting our Web Site at:http://www.pstc.panasonic.comor, send your request by E-mail to:npcparts@us.panasonic.comYou may also contact us directly at:1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)Panasonic National Parts Center20421 84th Avenue S., Kent, WA 98032(We accept Visa, MasterCard, Discover Card, American Express.)Accessory Purchases (United States and Puerto Rico) Appendix Warranty (For United States and Puerto Rico) 60 For assistance, please visit http://www.panasonic.com/help PRW120(en)_1009_ver031.pdf 60 2013/10/09 17:39:04 Limited Warranty CoverageIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (Limited Warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.PartsLaborOne (1) YearOne (1) YearDuring the Labor Limited Warranty period there will be no charge for labor. During the Parts Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new.Online Repair RequestTo submit a new repair request and for quick repair status visit our Web Site athttp://www.panasonic.com/repairTelephone Repair RequestYou may contact us at: 1-800-211-PANA (7262)When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty.For Limited Warranty service for headsets if a headset is included with this product please follow instructions above.IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAIDAND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Panasonic Telephone ProductsLimited WarrantyMail-In Service--Online or Telephone Repair Request Appendix For assistance, please visit http://www.panasonic.com/help 61 PRW120(en)_1009_ver031.pdf 61 2013/10/09 17:39:04 Limited Warranty Limits And ExclusionsThis Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.L Carefully pack your unit, preferably in the original carton.L Attach a letter, detailing the symptom.L Send the unit to Panasonic Exchange Center, prepaid and adequately insured.L Do not send your unit to Panasonic Corporation of North America listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products.When you ship the product Index Index
A Additional handsets: 32 3-way conference: 15 Alarm: 27 Answering calls: 14 Answering system: 36 Call screening: 40 Erasing messages: 37, 38, 40 Greeting message: 36 Greeting only: 41 Listening to messages: 37, 40 Message list: 37 New message alerting: 38 Number of rings: 41 Recording time: 41 Remote access code: 39 Remote operation: 39 Ring count: 41 Toll saver: 41 Turning on/off: 36 Auto intercom: 16 Auto talk: 14, 24 B Baby monitor: 29 Battery: 9, 10 Booster (Clarity booster): 15 C Calendar: 31 Call block: 28 First ring: 29 Call share: 15, 25 Call waiting: 15 Call Waiting Caller ID: 15 Caller ID number auto edit: 24, 35 Caller ID service: 34 Caller list: 34 Caller list edit: 35 Chain dial: 19 CID (Caller ID): 34 Conference calls: 16 Control type: 11 D Date and time: 12 Dialing mode: 13 Direct command code: 21 Display Clock: 24 Color: 24 Contrast: 24 Display mode: 24 Language: 12 LCD backlight: 24 E Wallpaper: 24 Eco mode: 10 Equalizer: 15 Error messages: 46 Flash: 15, 25 F G Groups: 18 H Handset Deregistration: 33 Name: 31 Registration: 32 Hold: 14 Intercom: 16 I K Key detector: 23, 26 Key tone: 24 Line mode: 25 L M Making calls: 14 Missed calls: 34 Mute: 14 N Noise reduction: 15 P Pause: 14 Phonebook: 17 Power failure: 10 R Redialing: 14 S T V Ringer tone: 23 Rotary/pulse service: 15 Schedule: 31 Silent mode: 28 Smartphone integration Network connection troubleshooting: 51 Network settings: 42 Network status: 44 Smartphone Connect app: 43 Wi-Fi repeater mode: 43 Speed dial: 19 SP-PHONE (Speakerphone): 14 Talking Caller ID: 23, 34 Temporary tone dialing: 15 Time adjustment: 23 Transferring calls: 16 Troubleshooting: 47 TTY: 59 VM (Voice mail): 45 Voice guidance language: 12 Voice mail: 41, 45 Volume Receiver: 14 Ringer (Handset): 14, 23 Speaker: 14 62 PRW120(en)_1009_ver031.pdf 62 2013/10/09 17:39:04 Notes 63 PRW120(en)_1009_ver031.pdf 63 2013/10/09 17:39:05 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.
(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2013 Printed in China
*PNQX6115ZA*
*PNQX6115ZA*
PNQX6115ZA TT0913MG0 (E) PRW120(en)_1009_ver031.pdf 64 2013/10/09 17:39:05 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions. If your product is not working properly. IMPORTANT!Visit our Web site: http://www.panasonic.com/help LFAQ and troubleshooting hints are available.Two Riverfront Plaza, Newark, NJ 07102-5490
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-10-18 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2013-10-18
|
||||
1 2 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 |
Newark, New Jersey 07102-5490
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
S******@nemko.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A3: Unlicensed Personal Communication System (PCS) devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ACJ
|
||||
1 2 | Equipment Product Code |
96NKX-PRW120
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** B********
|
||||
1 2 | Title |
Project Manager
|
||||
1 2 | Telephone Number |
201-3********
|
||||
1 2 | Fax Number |
201-3********
|
||||
1 2 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/02/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | PUB - Part 15 Unlicensed PCS Base Station | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DECT 6.0 Base with Wi-Fi | ||||
1 2 | DECT 6.0 Base | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is peak conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Power listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Nemko AS
|
||||
1 2 | Name |
F******** S******
|
||||
1 2 | Telephone Number |
47-22********
|
||||
1 2 | Fax Number |
47-22********
|
||||
1 2 |
f******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 68 CC | 2412.00000000 | 2462.00000000 | 0.0780000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15D | 68 CC | 1921.53600000 | 1928.44800000 | 0.0600000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC