all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 2.71 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Parts List/Tune Up Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Internal Photos | |||||||
1 2 | Parts List/Tune Up Info |
1 2 | User Manual | Users Manual | 2.71 MiB |
Model No. KX-UDT121Operating InstructionsDECT 6.0 Portable StationDocument Version: 2012-05Thank you for purchasing this Panasonic product.Please read this manual carefully before using this product and save this manual for future use.Please use only the battery provided and charge the battery for about 3 hours before using the handset for the first time. For details, see "Charging the Battery" in this manual.NoteIn this manual, the suffix of each model number is omitted unless necessary. Introduction Introduction Outline This manual describes information about the installation and operation of the PS (Portable Station) handset and the charger. Related Documentation Getting Started Briefly describes basic information about the installation of the handset and the charger. Administrator Guide Describes information about the programming and maintenance of the SIP Cell Station Unit (CS). Installation Guide Briefly describes basic information about the installation of the SIP Cell Station Unit (CS). Manuals and supporting information are provided on the Panasonic Web site at:
http://www.panasonic.com/sip (for users in the United States) http://panasonic.net/pcc/support/sipphone (for users in Canada) Note The contents and design of the software are subject to change without notice. 2 Operating Instructions Document Version 2012-05 Introduction Other Information When you ship the product (For users in the United States only) Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a postage-paid letter, detailing the symptom to the outside of the carton. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs. Product Service (For users in the United States only) Panasonic factory service centers for this product are listed in the service center directory. Consult your authorized Panasonic dealer for detailed instructions. For Future Reference Record the information in the space below for future reference. Note The serial number of this product may be found on the label affixed to the inside of the battery compartment on the back of the handset. You should note the serial number of this unit in the space provided and retain this manual as a permanent record of your purchase to aid in identification in the event of theft. Trademarks The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Jabra is a registered trademark of GN Netcom A/S. Plantronics is a registered trademark of Plantronics, Inc. All other trademarks identified herein are the property of their respective owners. vCard is a trademark of the Internet Mail Consortium. Document Version 2012-05 Operating Instructions 3 MODEL NO.SERIAL NO.DATE OF PURCHASENAME OF DEALERDEALER'S ADDRESSDEALER'S TEL. NO. Table of Contents Table of Contents Important Information ..............................................................................6 For Your Safety .................................................................................................................6 Data Security .....................................................................................................................8 Additional Information ......................................................................................................8 Important Safety Instructions ............................................................................................8 For Users in the United States Only .................................................................................8 For Users in Canada Only ..............................................................................................10 For Best Performance ....................................................................................................11 Battery Information .........................................................................................................11 Before Operating the Telephone ..........................................................13 Accessory Information ...................................................................................................13 Location of Controls .......................................................................................................14 Handset Functions ..........................................................................................................16 Setting the Password .....................................................................................................16 Key Lock .........................................................................................................................16 Silent Mode ....................................................................................................................16 Advanced Voice Clarity ..................................................................................................17 Power Save Mode ..........................................................................................................17 Display ............................................................................................................................18 Soft Keys ........................................................................................................................19 Other Icons .....................................................................................................................20 Flexible Keys ..................................................................................................................21 Basic Operations .............................................................................................................22 Operation Outline ...........................................................................................................22 Function Menus ...........................................................................................................23 Function Keys ..............................................................................................................23 Selecting the Display Language .....................................................................................24 Changing the Handset Phone Number Display ..............................................................24 Editing the Names of the Flexible Keys ..........................................................................24 Adjusting the Ringer Volume ..........................................................................................24 Changing the Vibrate Setting .........................................................................................24 Adjusting the Receiver/Speaker/Headset Volume .........................................................25 Feature Operations ................................................................................26 Making Calls ....................................................................................................................26 Calling ............................................................................................................................26 One-touch Dialing ...........................................................................................................26 Hot Key Dialing ...............................................................................................................26 Searching for an Item in the Phonebook ........................................................................27 Receiving Calls ................................................................................................................28 Receiving ........................................................................................................................28 Caller ID .........................................................................................................................28 During a Conversation ....................................................................................................29 Holding a Call .................................................................................................................29 Transferring a Call (Call Transfer) ..................................................................................29 Three-party Conference .................................................................................................29 Useful Features ...............................................................................................................30 Call Forwarding/Do Not Disturb ......................................................................................30 Call Waiting ....................................................................................................................30 Message Waiting ............................................................................................................31 Listening to Voice Mail Messages ..................................................................................31 4 Operating Instructions Document Version 2012-05 Table of Contents Bluetooth ........................................................................................................................31 Turning Bluetooth On or Off ........................................................................................31 Setting and Changing the Bluetooth PIN Number .......................................................31 Registering and Deregistering the Bluetooth Headset ................................................32 Connecting and Disconnecting a Bluetooth Headset ..................................................32 Call Handling with a Bluetooth Headset ......................................................................33 Registering and Deregistering a Cell Phone for Phonebook Transfer .........................33 Customizing the Telephone ..................................................................35 Using the Handset Phonebook ......................................................................................35 Private Ring ....................................................................................................................35 Storing an Item in the Handset Phonebook ....................................................................35 Phonebook and vCard Transfer by Bluetooth ................................................................37 Assigning Hot Keys ........................................................................................................38 Memo Alarm Setting .......................................................................................................39 Entering Characters .......................................................................................................40 Character Mode Table .................................................................................................41 Locking the Handset Phonebook ...................................................................................42 Deleting Stored Items .....................................................................................................42 Changing Handset Settings ...........................................................................................43 Handset Setting Menu Layout ........................................................................................43 Installation and Setup ............................................................................52 Battery Installation ..........................................................................................................52 Charger Connection ........................................................................................................52 Charging the Battery .......................................................................................................53 Charger Wall Mounting ...................................................................................................53 Attaching the Belt Clip ....................................................................................................54 Attaching the Phone Strap .............................................................................................54 Appendix .................................................................................................55 Specifications ..................................................................................................................55 RF Specifications (DECT 6.0) ........................................................................................55 RF Specifications (Bluetooth) .........................................................................................55 Troubleshooting ..............................................................................................................56 Error Messages ...............................................................................................................60 Index..............................................................................................................63 Document Version 2012-05 Operating Instructions 5 Important Information Important Information For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbols The following symbols are used to classify and describe the level of hazard and injury caused when the denotation is disregarded and improper use is performed. Denotes a potential hazard that could result in serious injury or death. Denotes a hazard that could result in minor injury or damage to the unit or other equipment. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely. General Safety For safety reasons, do not physically modify the product or any optional equipment. To prevent possible fire or electric shock, do not expose this product to rain or moisture. Follow all warnings and instructions marked on this product. To reduce the risk of electric shock, do not disassemble this product. Only qualified personnel should service this product. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock. Unplug the AC adaptor from the AC outlet and have the product serviced by qualified service personnel in the following cases:
A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into this product. C. If the product has been exposed to rain or water. E. D. If the product does not operate according to this manual. Adjust only the controls that are explained in this manual. Improper adjustment of other controls may result in damage and may require service by a qualified technician to restore the product to normal operation. If the product has been dropped or damaged. F. If product performance deteriorates. Do not insert objects of any kind into this product through openings, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on or in the product. The use of excessive sound volume through earphones, headphones, or headsets may cause hearing loss. Switch off the device when in the proximity of areas with potentially explosive atmospheres such as fuel/chemical storage facilities or blasting operations. 6 Operating Instructions Document Version 2012-05 WARNINGCAUTIONWARNING Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy.
(The product operates in the frequency range of 1920 MHz to 1930 MHz and the output peak power level is less than 0.12 W. When using Bluetooth devices, the product operates in the frequency range of 2.4000 GHz to 2.4835 GHz and the output peak power level is less than 2.5 mW.) Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using devices sensitive to external RF (radio frequency) energy. Unplug the charger from AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center. The battery poses a choking hazard. Keep the battery out of reach of children. This handset earpiece is magnetized and may retain small ferrous objects. Installation Do not install the product in any other way than described in relevant manuals. The product may only be installed and serviced by qualified service personnel. The AC adaptor should only be connected to the type of electric power supply specified on the charger label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate the charger where the power cord may be stepped on or tripped on. Important Information The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. The product should never be placed near or over a radiator or other heat source. Use only the AC adaptor, battery and charger indicated in this manual. Do not dispose of the battery in a fire. It may explode. Check with local authorities for special disposal instructions. Do not open, puncture, crush, or drop the battery. A damaged battery must not be used. This can result in the risk of fire, explosion, overheating, and leaking of the electrolyte. Do not touch released electrolyte if the battery leaks. It may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. If you touch it, immediately wash the affected areas with water and seek medical help. Exercise care in handling the battery in order not to short the battery to conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns. Charge the battery provided with, or identified for use with, this product only in accordance with the instructions and limitations specified in this manual. There is a danger of explosion if the battery is incorrectly replaced. When you leave the product unused for a long period of time, unplug the AC adaptor from the outlet. Do not use a microwave oven to dry this product. Do not use the AC adaptor if it has been submerged in water. Placement Do not place the product on an unstable surface, as a fall may cause serious internal damage. Notice This telephone communicates using digital signals that are difficult to intercept. However, it is possible that the signals could be intercepted by a third party. Document Version 2012-05 Operating Instructions 7 CAUTION Important Information Data Security To avoid unauthorized access to this product:
Keep the password (e.g., PIN for registration) secret. Change the default password. Set a password that is random and cannot be easily guessed. Change the password regularly. This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase the information such as the phonebook or call log from the memory before you dispose of, transfer or return the product, or have the product repaired. Set the password when you register the PS to the CS (Cell Station). For details, see "Setting the Password (Page 16)". It is recommended that you lock the phonebook to prevent stored information from being leaked when you carry the PS or if the PS is lost. Additional Information Important Safety Instructions When using your telephone equipment, basic safety precautions, including those below, should always be followed to reduce the risk of fire, electric shock and injury to persons. Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. Do not use the telephone in the vicinity of a gas leak to report the leak. For Users in the United States Only FCC and Other Information Privacy of communications may not be ensured when using this phone. FCC RF Exposure Warning:
This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm
(8 inches) or more between the product and all persons body (excluding extremities of hands, wrist and feet). This product may not be collocated or operated in conjunction with any other antenna or transmitter. The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. Notice FCC ID can be found inside the battery compartment or on the bottom of the units. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not 8 Operating Instructions Document Version 2012-05 SAVE THESE INSTRUCTIONS Important Information Suwanee, GA 30024-3186 If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This unit features a built-in Bluetooth module that can be used to wirelessly connect a Bluetooth headset to the unit. Hearing Aid Compatibility This telephone provides magnetic coupling for hearing aids as defined by the FCC in 47 CFR Section 68.316. Use only handsets or other acoustic devices with this equipment that are compliant with the hearing aid compatibility requirements of FCC Part 68. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. Compliance with TIA-1083 standard:
Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. For Product Service Call 1-800-211-PANA (7262) for the location of your nearest authorized service center. Panasonics e-mail address for customer inquiries:
consumerproducts@panasonic.com For customers in the USA and Puerto Rico ONLY. installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. 2. Perform such activities during off-peak hours, such as early morning or late evening. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this product. Customer Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the inside of the battery compartment of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ......... If requested, this number must be provided to the telephone company. If trouble is experienced with this equipment, for repair or warranty information, please contact:
Panasonic Service and Technology Company-BTS Center 415 Horizon Drive Bldg. 300 Ste. 350-B Document Version 2012-05 Operating Instructions 9 TCompatible withHearing Aid T-CoilTIA-1083 Important Information For Users in Canada Only Industry Canada Notices and Other Information This product meets the applicable Industry Canada technical specifications. Notice Operation is subject to the following two conditions:
(1) this product may not cause interference, and (2) this product must accept any interference, including interference that may cause undesired operation of the product. Privacy of communications may not be ensured when using this phone. Some wireless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimise or prevent such interference, the wireless telephone should not be placed near, or on top of, a TV or VCR. If interference is experienced, move the wireless telephone farther away from the TV or VCR. This will often reduce, or eliminate, interference. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This Class B digital apparatus complies with Canadian ICES-003. CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this product. RF Exposure Warning:
This product complies with IC radiation exposure limits set forth for an uncontrolled environment. This handset may not be collocated or operated in conjunction with any other antenna or transmitter. The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. 10 Operating Instructions Document Version 2012-05 For Best Performance Operating Range The range of operation depends on the topography of your office, weather, or usage conditions, because signals are transmitted between the CS and the handset by radio waves. Normally, you get greater range outdoors than indoors. If there are obstacles such as walls, noise may interfere with your telephone calls. In particular, high metal shelves or reinforced concrete walls will restrict your operating range. A handset may not work when it is too far from the CS depending on the structure of the building. We strongly suggest you hold the bottom half of the handset to ensure better call quality. Because, the antenna is located in the upper half of the handset. Noise Occasional noise or interference may occur due to electromagnetic radiation from objects such as refrigerators, microwave ovens, faxes, TVs, radios, or personal computers. If noise disturbs your telephone calls, keep the handset away from these electrical appliances. Environment Keep the product away from heating appliances and devices that generate electrical noise, such as fluorescent lamps and motors. These noise sources can interfere with performance of the product. Do not place the product in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). To avoid damage, charge the battery only in temperatures ranging from 5 C (41 F) to 40 C
(104 F). Allow 10 cm (3-15/16 in) clearance around the product for proper ventilation. Avoid environments with excessive smoke, dust, moisture, mechanical vibration, shock, or direct sunlight. The apparatus is designed to be installed and operated under controlled conditions of ambient temperature and a relative humidity. Routine Care Unplug the charger from the AC outlet before cleaning. Wipe the product with a soft cloth. Do not clean the product with abrasive powder or with chemical agents such as benzine or thinner. Do not use liquid cleaners or aerosol cleaners. Important Information Clean the terminal of the charger periodically. Placement Do not place heavy objects on top of the handset and charger. Care should be taken so that objects do not fall onto, and liquids are not spilled into, the product. Place the charger on a flat surface. If the charger is mounted on the wall, install it straight. Bluetooth A Bluetooth headset can communicate with the handset within a range of approximately 10 m
(32.8 ft). The connection may be subject to interference from obstructions such as walls or electronic devices. For best performance, we recommend using a Bluetooth headset within 1 m
(3.28 ft) of the handset. This unit complies with the Bluetooth wireless technology 2.0 specification. Battery Information After your Panasonic battery is fully charged (at 25 C
[77 F]):
Operation Operating Time While Talking
(Backlight off*1, Bluetooth off, Narrowband Mode) While Talking
(Backlight on*2, Bluetooth on, Wideband Mode) While not in use
(Standby) Up to about 13 h Up to about 7 h Up to about 200 h
*1 When the "Talking" setting of "Backlight" is set to "Off". For
*2 When the "Talking" setting of "Backlight" is set to "On". For details, see "Display Option (Page 48)". details, see "Display Option (Page 48)". Operating time may be shorter than listed above depending on usage conditions and ambient temperature. The battery will drain slowly even while the handset is turned off. The handset can receive calls while charging. Battery consumption increases when the handset is out of range (if "
" flashes, turn the handset off). Clean the handset and the charger contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high Document Version 2012-05 Operating Instructions 11 Important Information humidity. Otherwise the battery may not charge properly. Low Battery Warning The battery needs to be charged in the following situations:
The battery level indicator displays as empty ("
") and the alarm sounds*1.
"Charge Battery" is displayed. In this situation, the handset cannot be operated. If the low battery warning occurs during a conversation, the handset will turn off in one minute.
*1 Replacing the Battery
") after If the battery level indicator displays as empty ("
using the phone for a short time, even when the battery has been fully charged, the battery should be replaced. Before replacing the battery, make sure the low battery warning is displayed, then turn off the power to prevent memory loss. Replace the battery and charge the new battery for about 3 hours. If you replace the battery before the low battery warning appears, the battery strength icon may display an incorrect reading. In this case, use the handset as normal with the new battery installed. To install the battery, see "Battery Installation (Page 52)". When the low battery warning is displayed, charge the battery for about 3 hours. The battery strength icon will then display the correct reading. Please use only Panasonic batteries. For details, consult your administrator or dealer. There is a danger of explosion if the battery is incorrectly replaced. A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. 12 Operating Instructions Document Version 2012-05 Before Operating the Telephone Before Operating the Telephone Accessory Information Included Accessories AC adaptor: 1 Charger: 1 Battery*1: 1
[Part No.]
PNLV226 Belt Clip: 1
[Part No.]
PNWEUDT121M Belt Clip Holder: 1 Battery Cover*2: 1
[Part No.]
PNKE1142Z1
[Part No.]
PSKE1040Z4
*1
*2 For details, consult your administrator or dealer. The battery cover comes attached to the handset. To order accessories, call toll-free 1-800-332-5368. (For users in the United States only) Note The illustrations may differ from the appearance of the actual product. Document Version 2012-05 Operating Instructions 13 Before Operating the Telephone Location of Controls The headset is an optional accessory.
[Back View]
Open the cover. A Ringer/Charge Indicator B Headset Jack The following headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.) Wired headsets Panasonic KX-TCA400 and KX-TCA430 Bluetooth headsets Selected Plantronics-brand headsets Selected GN Netcom Jabra-brand headsets For up-to-date information about headsets that have been tested with this unit, refer to the following web sites:
http://www.panasonic.com/sip (for users in the United States) http://panasonic.net/pcc/support/sipphone (for users in Canada) C TALK/SP-PHONE (Speakerphone) Key Used to make or answer calls, or toggle between Receiver mode and Hands-free*1 mode during a conversation. D Navigator Key The Navigator Key includes four arrow keys and a center key. The arrow keys are used to adjust the ringer/receiver volume or move the cursor to select an item. The center key is used to confirm a selection. If in standby mode, pressing the keys perform the following functions:
A LEFT (
) Used to display the Incoming call log. 14 Operating Instructions Document Version 2012-05 Before Operating the Telephone
) Used to adjust the ringer volume.
) Used to open the phonebook.
) Used to display the Outgoing call log. B UP (
C RIGHT (
D DOWN (
E CENTER Used to display the Menu. In this manual, when a procedure instructs you to "press
[CENTER] key to confirm the selection.
", you can also press the E HOLD/Voice Message Key During talking, used to place a call on Hold. In standby mode, pressing this key plays your voice messages. F Silent Mode Key Used to turn Silent Mode on or off when pressed for more than 2 seconds in standby mode. For details, see "Silent Mode (Page 16)". G Flexible Key Pressing the
, and #). The functions can be selected from the menu, or accessed quickly by pressing key displays a menu with functions that have been assigned to each dial key (09,
, then the assigned key. H Receiver I Display For details, see "Display (Page 18)". J Soft Keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. For details about the soft keys displayed here, see "Soft Keys (Page 19)". K POWER/CANCEL Key Used to end calls, exit the phonebook or Function mode. Press and hold this key to turn the handset on or off. L TRANSFER/CLEAR Key Used to transfer a call to another party, or to clear digits or characters. M Function Key Pressing the functions quickly. For details, see "Function Keys (Page 23)". key followed by a keypad number (09) allows you to perform various common N Microphone O Charge Contacts P Strap Holes Used to attach phone straps and similar items. Q Speaker
*1 You can talk with the other party alternately through the speaker in a quiet room. During a conversation using a headset, Hands-free mode does not work. Document Version 2012-05 Operating Instructions 15 FLEXFLEXFUNC Before Operating the Telephone Handset Functions Setting the Password The handset password is not set by default. You must register a handset password (4 digits) before use. You cannot use the following features without setting a password:
Phonebook lock (See "Locking the Handset
"Manual&Password" or "Auto&Password" for Key Lock Type (See "Key Option (Page 47)".) Phonebook (Page 42)".) Reset Handset (See "Other Option (Page 50)".) To set 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
then press 4. Press [
] or [
] to select "Other Option", and
] to select "Change Password", and then press
. 5. Enter a new password (4 digits [09]). 6. Verify the password by entering it again as in step 5. Note To avoid unauthorized access to this product:
Set a password that is random and cannot be easily guessed. Change the password regularly. Make a note of the password so that you will not forget it. Key Lock You can lock all keys other than the Navigator Key while the handset is in standby mode. One of 4 key lock types can be selected. For details, see "Key Option
(Page 47)". To lock Press and hold for more than 2 seconds to lock the handset keys. The keys are locked. icon will be displayed to indicate that the or the [CENTER] navigation key icon will change to To unlock To unlock the handset keys, press and hold or the [CENTER] navigation key for more than 2 seconds. The to indicate the keys have been unlocked. Note If you select "Manual&Password" or
"Auto&Password" for Key lock type, you need to enter the password to unlock the handset. If no password has been set, you cannot select
"Manual&Password" or "Auto&Password"
for Key lock type. To set the password, see
"Setting the Password (Page 16)". Silent Mode Silent Mode turns off the ringer and sets the handset to vibrate when calls are received. This can be useful in situations where you do not want to be disturbed, such as during a meeting. When Silent Mode is active, the following features are turned off or set as specified automatically, regardless of their settings. Ringer Volume Ring On Charger Auto Answer Key Tone Vibrate (Vib.& Ring) To set or cancel To set or cancel Silent Mode, press and hold more than 2 seconds. Note If you set the handset on the charger during Silent Mode, the handset will not vibrate.*1 for When Silent Mode is set, the Low Battery Alarm will not be heard in standby mode. When Silent Mode is set, confirmation sounds for setting the ring pattern or ring volume will not play.
*1 Please note that if you set the handset on the charger while receiving an incoming call, vibration will stop. Once the vibration stops, the handset will not vibrate again for that call, even if the handset is lifted up again. (If Quick Answer is set, lifting up the handset will answer the call.) 16 Operating Instructions Document Version 2012-05 Before Operating the Telephone Advanced Voice Clarity When Advanced Voice Clarity is enabled, environmental noise is reduced to improve and maintain sound quality for the other party in the conversation. Receiver volume is also increased according to the level of environmental noise. It is useful in noisy environments such as warehouses, manufacturing plants, restaurants, and garages. Advanced Voice Clarity can be enabled by default for regular use, or toggled on/off during a call. Enabling or disabling Advanced Voice Clarity 1. Press 2. Press [
] or [
] to select "Voice Clarity", and
] to select "On" or "Off", and then then press 3. Press [
press
] or [
. Temporarily enabling or disabling Advanced Voice Clarity during a call You can enable or disable Advanced Voice Clarity during a call by doing either of the following:
a. Press
, then press [
] or [
] to select "Voice
. Clarity", and then press or b. Press
. To display the soft key, edit the displayed soft keys. See "Key Option (Page 47)". Note Advanced Voice Clarity can be used only in Receiver mode or with a headset. It cannot be used in Hands-free mode. If Hands-free mode is enabled during a call while Advanced Voice Clarity is enabled, Advanced Voice Clarity will be temporarily disabled. Power Save Mode Power Save Mode turns off the ringer, LCD backlight, and/or key backlight automatically after a set number of seconds have passed while receiving a call. For details about adjusting power save mode settings, see
"Incoming Option (Page 45)". Document Version 2012-05 Operating Instructions 17 FUNCFUNC Silent Mode (See page 16) Auto Answer Call on Hold Microphone Mute Voicemail Waiting New Incoming Call Record Call Forwarding (See page 30) Do Not Disturb (See page 30) Time Display Date/Incoming Call Log Status/New Messages or New Text Messages/Phonebook Error Handsets Phone Number and Name To change the display of the handsets phone number, see "Changing the Handset Phone Number Display (Page 24)". Soft Keys Note Example images of the display in this manual are samples only, and the actual screen on your phone may vary in color and/or appearance. Before Operating the Telephone Display Pictograph Within range of a Cell Station (CS)
(Blinking) Out of range Off-hook Status Phonebook Message Waiting Bluetooth on, no Bluetooth headset connection Bluetooth on, Bluetooth headset connected Incoming Call Log Outgoing Call Log Navigation Key Guidance Battery Indicator*1 Full Low Needs to be charged
*1 For details, see "Battery Information (Page 11)". Handset Status Information Vibration (See page 24) Ringer Off (See page 24) 18 Operating Instructions Document Version 2012-05 124 563 Soft Keys Icons and information shown on the display will vary depending on the context. To select an item shown on the display, press the corresponding soft key. Before Operating the Telephone Opens the phonebook. Pressing this key for more than 2 seconds locks the phonebook. Displayed when in Phonebook Lock. Pressing this key and then entering the password (default: not registered), unlocks the phonebook temporarily. Pressing for more than 2 seconds, then entering the password (default: not registered), unlocks the phonebook. If no password has been set, you cannot lock the phonebook. For details about setting the password, see "Setting the Password
(Page 16)". Stores a new item in the phonebook. Make a call. Activate/deactivate Advanced Voice Clarity. Used to set the Alarm. Reject an incoming call. Establishes a multiple-party conversation
(Conference). Searches for an item in the phonebook alphabetically. Displayed when in Alphabetic character entry mode. Pressing this key switches to Numeric character entry mode. Displayed when in Numeric character entry mode. Pressing this key switches to Special character (Extended 1) character entry mode. Used to save a setting. Clears digits or characters. Turns the microphone mute feature on or off during a conversation. Flashes when Mic Mute is on. Turns the ringer off. When in standby mode, opens the main menu. When changing/viewing settings, opens the list menu (edit/delete in the phonebook, etc.). When in standby mode, pressing this key for than 2 seconds locks all keys. Returns to the previous display. Used to select AM or PM when setting the Memo Alarm feature. Confirms the entry. Displayed when in Key Lock mode. Pressing this key for more than 2 seconds unlocks the keys. Advances to the next display. Used to delete the setting. Document Version 2012-05 Operating Instructions 19 Before Operating the Telephone Displayed when in Special character
(Extended 1) entry mode. Pressing this key switches to Alphabetic character entry mode. Used to set Call Forwarding and Do Not Disturb. Displays the Outgoing Call Log. Disconnects the current call and allows you to make another call without hanging up. Perform an unscreened (blind) transfer. Used to select an item when in setting mode. Displays the last dialed number. Used to set/clear the Auto Answer mode. Opens the Incoming Call Log. Note The display of the soft keys can be customized. The soft keys displayed in standby mode or during a call can be set. The names of the soft keys can also be edited. For details, see "Key Option
(Page 47)". Other Icons Icon Description Displayed next to an extension from which a voice mail message is waiting. For details, see "Listening to Voice Mail Messages (Page 31)". 20 Operating Instructions Document Version 2012-05 Before Operating the Telephone Flexible Keys A Flexible Key can be used either to seize a line in order to make or receive a call, or used as a function key. Press to display the Flexible Key list. Here you can access the 12 Flexible Keys. The color of each key number indicates the status of the line or the status of the function assigned to the key.
[Example]
To select a key, press [
desired key, and then press To edit the names of Flexible Keys, see page 24.
] to select the
] or [
. The following types of flexible keys are available:
DN (Directory Number) Seizes the line assigned to the DN key. When a call arrives at the DN key, pressing the key answers the call. LED Indication Off: Idle Green on: You are on a call using the DN key. Red on: A shared line is in use or on private hold at Flashing green rapidly: A call is being received. Flashing green slowly: A call is on hold. another unit. Flashing red slowly: A shared line is on hold at another unit. Note A shared line is a line that can be used by multiple units. This is an optional feature and may not be supported on your phone system. If a call is on private hold (red, steady on), the call cannot be retrieved except from the unit that put the call on hold. One-Touch Calls the party or accesses a feature assigned to the key. For details, see "One-touch Dialing (Page 26)". Document Version 2012-05 Operating Instructions 21 FLEXKey numbers Before Operating the Telephone Basic Operations Operation Outline Handset functions are accessed through the display menu and selected with the Navigator Key and soft keys.
*1 If soft key display settings are changed, the soft keys shown here may not be displayed. The selected item will be highlighted. For details about entering characters, see "Entering Characters (Page 40)". For details about searching for an item in the phonebook, see "Searching for an Item in the Phonebook (Page 27)". 22 Operating Instructions Document Version 2012-05 FUNCFLEX[Main Menu][Handset Phonebook][Incoming Call Log][Ringer Volume][Outgoing Call Log][Function Keys][In standby mode]*1[Flexible Keys]Press the Navigator KeyPress the Navigator Keyor press the Navigator Keyor press the Navigator Key Function Menus Press the main and sub menus. Main MenuWhile in Standby Mode or the [CENTER] navigation key to display Incoming Log Enters the Incoming Call Log. Ringer Volume Accesses the "Ringer Volume" setting. New Phonebook Stores a new item in the phonebook. Setting Handset Accesses the "Setting Handset" settings. Memo Alarm Accesses the "Memo Alarm" settings. Sub MenuWhile Off-hook/During a Conversation Phonebook Opens the phonebook. New Phonebook Stores a new item in the phonebook. Outgoing Log Enters the Outgoing Call Log. Incoming Log Enters the Incoming Call Log. Mute Turns the microphone mute feature on or off during a conversation. Before Operating the Telephone Function Keys Handset functions can be activated through the display key list. 1. Press 2. Press [
] to select the desired function, and to display the function key list.
] or [
. then press You can also press the number key corresponding to a function number to select it directly. 1: Mute/A.Ans Automatically answers incoming
" is calls in hands-free mode. "
displayed in standby mode. 2: Conference Establishes a multiple-party conversation. 3: Fwd/DND Displays and/or sets Call Forwarding and Do Not Disturb. 4: Voice Clarity Sets Advanced Voice Clarity. 5: Last No Redial Call the last number that was dialed. 6: Phonebook Makes a call using the phonebook. 7: Incoming Log Makes a call using the Incoming Call Log. 8: Redial List List numbers that were recently dialed. 9: Flash/Recall Disconnects the current call and allows you to make another call without hanging up. 0: Alarm Sets a memo alarm. Document Version 2012-05 Operating Instructions 23 FUNC Before Operating the Telephone Selecting the Display Language You can select the language displayed on your handset. 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
then press
] to select "Display Option", and
] to select "Language", and then
] or [
] or [
. 4. Press [
press 5. Press [
press You can select one of the following 3 languages: English, Espaol, FRANAIS.
] to select a language*1, and then
*1 Changing the Handset Phone Number Display You can change the display of the handsets phone number when the handset is in standby mode. 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
then press 4. Press [
] or [
] to select "Display Option", and
] to select "Standby Display", and then press
. 5. Press [
press
] to select the desired item, and then
] or [
. Note By default, "H/S No." is selected. For details about standby display settings, see
"Display Option (Page 48)". Editing the Names of the Flexible Keys Web user interface programming is required to change the names of the Flexible Keys used for the handset. For details, consult your administrator or dealer. Adjusting the Ringer Volume The volume of the ringer can be adjusted, or turned off. Adjusting the Ringer Volume or Turning the Ringer Off 1. Press 2. Select "
or the [CENTER] navigation key. Ringer Volume" by pressing the 3. Press [
arrow keys, and then press
] to select the desired setting (Step Up, Step Down, Level 16, Off), and then press
] or [
. Note You can press the [
] key instead of performing steps 1 and 2. For details about setting the ringer pattern, see
"Incoming Option (Page 45)". Adjusting the Ringer Volume or Turning the Ringer Off while Ringing While receiving a call, do the following to adjust the ringer volume or turn the ringer off:
To adjust the ringer volume Press [
To turn the ringer off Press
] to adjust the volume*1.
] or [
or
*1 The adjusted volume level will also be used for subsequent calls. Note If you attach a headset while receiving an incoming call, the ring from the handset does not switch to the headset. If you attach a headset before receiving an incoming call, and headset ringer is set to "On", ringing will be heard from the headset. Changing the Vibrate Setting 1. Press or the [CENTER] navigation key. Setting Handset" by pressing the 2. Select "
arrow keys, and then press
. 3. Press [
] or [
] to select "Incoming Option", and then press 4. Press [
press
] or [
] to select "Vibrate", and then 24 Operating Instructions Document Version 2012-05 Before Operating the Telephone 5. Press [
] or [
] to select the desired setting
(Vib.& Ring, Vib. Ring, Off), and then press
. Note To set Vibrate only, without ringing, select
"Vib.& Ring" and set the Ringer Volume to
"Off", or turn Silent Mode on. For details, see
"Location of Controls (Page 14)" and "Adjusting the Ringer Volume (Page 24)". Adjusting the Receiver/
Speaker/Headset Volume During a conversation, press [
volume (Level 16). Note
] or [
] to adjust the If you are using a Bluetooth headset, you can also adjust the receiver volume by using the volume key on the Bluetooth headset. For details about using a Bluetooth headset, see
"Bluetooth (Page 31)". Document Version 2012-05 Operating Instructions 25 Feature Operations Feature Operations Making Calls Calling Calling by Dialing 1. Press 2. Dial the outside partys number. 3. Press 4. To end the call, press
. Predialing In standby mode, you can start dialing while still on-hook. After dialing the number, press off-hook and begin the call. Note to go Alternatively, you can seize a specific line for and selecting for more than 1 second. making the call by pressing an idle DN key. To clear an entire number while predialing, press To cancel dialing, press If "
again. If you are using a Bluetooth headset, see "Call Handling with a Bluetooth Headset
(Page 33)".
" flashes, move closer to the CS and dial
. Using the Outgoing Call Log If a call is received from a phone number stored in the phonebook, the number and name of the caller will be displayed in the call log. 1. While in standby mode, press [
2. Press [
] to select an outgoing call record,
] or [
] or
. and then press
. 3. To end the call, press
. Using the Incoming Call Log 1. While in standby mode, press [
2. Press [
] or [
] to select an incoming call record, and then press
. 3. To end the call, press
. Using the Phonebook 1. Press [
2. Select an item stored in the phonebook, and then
] or
. press
. 3. To end the call, press
. Note For details about searching for an item in the phonebook, see "Searching for an Item in the Phonebook (Page 27)". For details about entering characters, see
"Entering Characters (Page 40)". For details about storing an item in the phonebook, see "Storing an Item in the Handset Phonebook (Page 35)". One-touch Dialing You can make a call with a One-touch operation if a One-touch Dialing key has been created for the desired party. One-touch Dialing keys can also be configured to access features of your phone system, if available. 1. Press
, and then press the One-touch Dialing key (flexible key). 2. To end the call, press
. Note For details about Flexible Keys, see "Flexible Keys (Page 21)". Hot Key Dialing You can assign a phone number to each number key and then access the desired phone number by simply pressing and holding the assigned number key. 1. Press and hold the dialing key (09) assigned as a Hot Key for more than 1 second. 2. Press
. Note
] or [
While the Hot Keys information is displayed, you can press [
] to select another Hot Key number. If Hot Key dialing is set to "Auto", a Hot Key number can also be dialed by pressing and holding the assigned dialing key for a specified 26 Operating Instructions Document Version 2012-05 FLEXFLEX Feature Operations While an item is displayed you can press to return to the "<Enter Name>" display, and then search for another item. number of seconds. For details, see "Selecting the Type of Hot Key Dialing (Page 38)". For details about assigning Hot Keys, see
"Assigning Hot Keys (Page 38)". Searching for an Item in the Phonebook You can search for an item in the phonebook, and then make a call. 1. While in standby mode, press [
2. Press [
3. Press
] to select the desired item.
] or [
] or
. Searching by Name You can also search for an item in the phonebook by entering a name:
1. While in standby mode, press [
2. Press 3. Enter the name or the first character(s) of the
] or
. desired name, and then press
. 4. Press [
5. Press
] or [
] to select the desired item. Searching by Category If items in the phonebook have been assigned categories, you can search by category. 1. While in standby mode, press [
] or 2. Press
, and then press #. 3. Press [
press
] or [
] to select a category, and then
. 4. Enter the name or the first character(s) of the desired name of the item in the category, and then press 5. Press [
6. Press
] to select the desired item.
] or [
. Note If one item has multiple phone numbers stored, you can press the [CENTER] navigation key, and then press [
] to select the desired phone number for that item. For details about entering characters, see
"Entering Characters (Page 40)".
] or [
Document Version 2012-05 Operating Instructions 27 Feature Operations Receiving Calls Receiving To answer an incoming call, press
. Note If you are using a Bluetooth headset, see "Call Handling with a Bluetooth Headset
(Page 33)". To answer an incoming call on a specific line 1. Press to display the flexible keys. 2. Press the flexible key number, or press [
to select the desired key, and then press
] or [
. You can also answer a call using the following features:
Any Key Answer Quick Answer Auto Answer For details about setting these features, see "Answer Option (Page 46)". Note Flexible keys with incoming calls will be flashing green rapidly. If "Quick Answer" is set to "On" and a brief power failure occurs while the handset is receiving a call on the charger, the following may occur:
If a brief power failure occurs when the handset is receiving a call on the charger, If "Talk On Charger" is set to
"Off" (default), the call may be disconnected after being answered. If "Talk On Charger" is set to "On", the call may be answered automatically. In this case, please note that privacy rights may be violated or sensitive information may be transmitted to unauthorized parties. You can select the ringer pattern and LED pattern for each type of incoming call. For details, see "Incoming Option (Page 45)". 2. The call will be rejected, and the handset will return to standby mode. Rejecting calls from specific numbers Calls from specific numbers can be automatically rejected. This feature can be enabled through Web user interface programming. For details, contact your administrator or dealer. Caller ID If an outside call that contains Caller ID information (a callers name and telephone number) is received, this information will be logged in the incoming call log and displayed on the handset. If a call from a number matching a number entered in the phonebook is received, the name registered in the phonebook for that number will be displayed along with the number.
[Example]
If caller information is sent by the phone system and there is also information stored in the phonebook for the same number, you can choose which information will be displayed on the handset. Caller information sent by the phone system is displayed by default. For details, see "Display Option (Page 48)". If you set the handset to display the caller information stored in the phonebook, caller information sent by the phone system will only be displayed if the number of the caller is not stored in the phonebook. Rejecting an incoming call You can reject an incoming call from your handset. 1. While an incoming call is ringing, press
. 28 Operating Instructions Document Version 2012-05 FLEX During a Conversation Holding a Call You can put a call on hold by holding the call at your extension. To hold the current call Press
, and then press
. Note If Automatic Call Hold is enabled on your handset, the call will also be put on hold if you select a DN key other than the one for the current call. For details, consult your administrator or dealer. To retrieve a call on hold at your extension 1. Press 2. Press the dial key corresponding to the slowly
. flashing green DN key, or press [
a slowly flashing green DN key, and then press
] or [
] to select
. Transferring a Call (Call Transfer) You can transfer a call to another destination (extension or outside party). To transfer 1. Press 2. Dial the party you want to transfer to, and then press during a conversation. 3. Wait until the other party answers to announce the
. transfer. 4. Press
. Note To return to the call before the transfer destination answers, press If unscreened transfers are supported on your phone system, step 3 can be omitted. For details, consult your administrator or dealer. To do a blind transfer 1. Press during a conversation. Feature Operations 2. Dial the party you want to transfer to, and then press
. 3. Press
. Three-party Conference During a conversation, you can add an additional party to your call and establish a conference call. Notice Your phone system may support advanced conference features, such as conference calls with four or more parties. In this case, the procedures for handling a conference call may be different from those explained in this section. For details about your phone system, consult your administrator or dealer. Making a Conference Call
, and then press 2 ("Conference"). 1. Press 2. Dial the party you want to add to the conversation, and then press
. 3. After the called party answers, press then press 2 ("Conference").
, and Note The soft key can also be used to access the Conference function directly. To display this key, edit the displayed soft keys. For details, see "Key Option (Page 47)". Removing a Party from the Conference During a conference, you can remove other parties from the conference. However, this operation is available only during conference calls you initiate. 1. During a conference call, press
. 2. Press 3. Press the dial key, or press [
], and then
] or [
. press corresponds to the party you want to disconnect. to select the DN key (flexible key) that
. 4. Press 5. Press 6. Press the dial key, or press [
. press corresponds to the remaining party. to select the DN key (flexible key) that
] or [
], and then Document Version 2012-05 Operating Instructions 29 FLEXFUNCFUNCFLEXFLEX Feature Operations Note To reestablish the conference without removing either party, press
("Conference") after step 3.
, and then 2 Ending a Conference Call To go on-hook and end the conference call, press
. Useful Features Call Forwarding/Do Not Disturb You can have incoming calls automatically forwarded to another destination. You can also have incoming calls rejected (Do Not Disturb). To access the FWD/DND settings 1.
, and then 3 ("Fwd/
In standby mode, press DND"). If the unit has multiple lines, press [
select the desired line, and then press
] to
] or [
2. 3. Press [
] or [
] to select the type of FWD or DND
. setting to apply, and then press The settings are as follows:
DND: Enable Do Not Disturb Fwd(All): Enable Forward All Calls
(All incoming calls are forwarded.) Fwd(Busy): Enable Forward Busy
(All incoming calls are automatically rejected.)
(Incoming calls are forwarded only when your extension is in use.) Fwd(NA): Enable Forward No answer
(An incoming call is forwarded if you do not answer the call within a certain amount of time.) If a Forward setting is selected, enter a new forward destination number, or confirm and modify a previously set forward destination number, and then press
. 4. Note When Call Forwarding and/or Do Not Disturb is appears on the display enabled, in standby mode. FWD settings cannot be used on a shared line. and/or Call Waiting During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the second call by disconnecting or holding the current call. To disconnect the current call and then talk to the new party 1. Press 2. Press while hearing the call waiting tone. 30 Operating Instructions Document Version 2012-05 FUNCFUNC To hold the current call and then talk to the new party 1. Press 2. Press 3. Press the dial key corresponding to the flashing while hearing the call waiting tone. green DN key, or press [
flashing green DN key, and then press
] or [
] to select a
. Message Waiting If another extension has left a message waiting indication for your extension, you can call back the other extension directly. When your extension has a message waiting indication set, "Message" is displayed, and will appear. To call back an extension that has left a message waiting indication 1. 2. Press [
] to select the line on which In standby mode, press
] or [
. displayed, and then press
. is Listening to Voice Mail Messages When you receive a voice message, "Voice Msg" is displayed, and You can check your new messages by accessing your mailbox. 1. 2. Press [
In standby mode, press and hold
] to select the line on which will appear.
] or [
is
. displayed, and then press
. Note Step 2 is not necessary if only one line is configured on the handset. Feature Operations Turning Bluetooth On or Off Before using Bluetooth to connect to a wireless Bluetooth headset or to a cell phone, Bluetooth must be set to "On" in the handset settings. 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
. 5. Press [
press
] or [
] or [
] to select "On/Off", and then press
] to select "On" or "Off", and then Setting and Changing the Bluetooth PIN Number Before using Bluetooth to connect to a cell phone, you must set the Bluetooth PIN number in the handset settings. 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
] or [
] or [
then press
] to select "Cell Phone", and then
] to select "Change BT PIN", and
. 6. Enter the old PIN number, and then press 7. Enter a PIN number (4 digits), and then press
.*1
. 8. Re-enter the same PIN number as in step 7, and
*1 then press If a PIN number has not been set previously, skip this step and continue to step 7. Bluetooth You can use Bluetooth to connect to a Bluetooth wireless headset and transfer phonebook data from a cell phone. Note The valid digits are 09. Document Version 2012-05 Operating Instructions 31 FLEX Feature Operations Registering and Deregistering the Bluetooth Headset You can use a wireless Bluetooth headset with a handset. Before using a Bluetooth headset, you must register it to a handset. Registering a Bluetooth Headset Notice Perform any procedures on the headset necessary for registering it before configuring the settings on the handset. Otherwise, the Bluetooth headset may not be registered. or the [CENTER] navigation key. Setting Handset" by pressing the 1. Press 2. Select "
arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
] or [
] or [
then press 6. Press [
press
] or [
] to select "BT Headset", and then
] to select "Registration", and
] to select "Register", and then 7. Enter the headsets Bluetooth PIN number, and then press
. Note After pressing in step 4, if no Bluetooth headset is registered, skip to step 7. Only one Bluetooth headset can be registered to the handset. If a different Bluetooth headset has already been registered, registering a new Bluetooth headset will overwrite the current registration. Up to 4 digits can be entered for the Bluetooth headsets PIN number. Deregistering the Bluetooth Headset 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
] or [
] or [
then press 6. Press [
press 7. Press [
] or [
] or [
] to select "BT Headset", and then
] to select "Registration", and
] to select "Deregister", and then
] to select "Yes", and then press Connecting and Disconnecting a Bluetooth Headset You can connect a registered Bluetooth headset with a handset. Connecting a Bluetooth Headset 1. Press or the [CENTER] navigation key. Setting Handset" by pressing the 2. Select "
arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
press 6. Press [
] or [
] or [
] or [
] to select "BT Headset", and then
] to select "Connection", and then
] to select "On", and then press Note The default setting is "On". Disconnecting the Bluetooth Headset 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
press
] or [
] or [
] to select "BT Headset", and then
] to select "Connection", and then 32 Operating Instructions Document Version 2012-05 6. Press [
] or [
] to select "Off", and then press Call Handling with a Bluetooth Headset You can make or answer a call using the Bluetooth headset. Note In this manual, the names of buttons and features described for Bluetooth headsets are examples only. Your Bluetooth headsets button names or features may differ. Consult the documentation for your Bluetooth headset for operation and feature information. Making a Call with the Bluetooth Headset 1. Dial the outside partys number. 2. Press the [TALK] button or [REDIAL] button on the 3. To end a call, press the [TALK] button on the Bluetooth headset. Bluetooth headset. Answering a Call Using a Bluetooth Headset 1. Press the [TALK] button on the Bluetooth headset. 2. To end a call, press the [TALK] button on the Bluetooth headset. Note When a call is received, if the headset ringer is on, the Bluetooth headset will ring even if the handset is set to Silent Mode, or if "Vibrate"
or "Ring On Charger" is enabled. Switching a Conversation between the Handset and a Bluetooth Headset To switch a conversation from the handset to the Bluetooth headset Press twice. Feature Operations To switch a conversation from the Bluetooth headset to the handset Press
. Adjusting the Microphone Volume of a Bluetooth Headset 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
] or [
] or [
and then press
] to select "BT Headset", and then
] to select "Headset Mic Vol",
. 6. Press [
] or [
] to adjust the volume (Level 16), and then press
. Note The microphone volume for the Bluetooth headset can only be adjusted when the handset is in standby mode. Registering and Deregistering a Cell Phone for Phonebook Transfer You can transfer the phonebook data of a cell phone to the handset. Before performing the transfer, you must register the cell phone to the handset. For details about transferring a phonebook, see "Phonebook and vCard Transfer by Bluetooth (Page 37)". Registering a Cell Phone 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
] or [
] or [
then press
] to select "Cell Phone", and then
] to select "Registration", and
. Document Version 2012-05 Operating Instructions 33 Feature Operations 6. If the "Register/Deregister" menu is displayed,
] to select "Register", and then press [
press
. Otherwise, proceed to step 7.
] or [
7. Complete the registration by operating the cell phone. Note Follow the procedure above before doing any operations on the cell phone. Otherwise, the cell phone may not be registered. When you operate the cell phone, the handsets Bluetooth PIN number is required. For details, see "Setting and Changing the Bluetooth PIN Number (Page 31)". Deregistering a Cell Phone 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. then press 4. Press [
press 5. Press [
6. Press [
press 7. Press [
] or [
] or [
] or [
] or [
] to select "Cell Phone", and then
] to select "Registration", and
] to select "Deregister", and then
] to select "Yes", and then press 34 Operating Instructions Document Version 2012-05 Customizing the Telephone Using the Handset Phonebook You can store up to 500 phone numbers in the handset along with names for easy access. You can also set unique ringer patterns and LED patterns for different categories to identify incoming calls. All phonebook items are stored in alphabetical order. For security purposes, you can lock the phonebook. For details about making calls from the phonebook, see
"Using the Phonebook (Page 26)". Note A single entry (i.e., name) can have multiple phone numbers. Since the phonebook capacity is limited by the number of stored phone numbers, storing multiple phone numbers in an entry decreases the maximum number of entries. We recommend that backups are made of the handsets phonebook data, in case the data becomes unrecoverable due to product malfunction. For details, consult your administrator or dealer. Private Ring You can organize entries in the phonebook into one of 9 Private Ring Categories. It is possible to set a different ringer pattern and LED pattern, vibration pattern, and color pattern*1 for each category. When the displayed Caller ID*2 matches a phone number or name stored in the phonebook, the handset rings according to the Private Ring Category settings.
*1
*2 For details about ringer patterns, LED patterns, vibration patterns, and color patterns, see "Incoming Option
(Page 45)". For details about Caller ID information, see "Caller ID
(Page 28)". Customizing the Telephone Storing an Item in the Handset Phonebook Storing a New Item 1. Press 2. Select "
or the [CENTER] navigation key. New Phonebook" by pressing the arrow keys, and then press
. 3. Enter a name (max. 24 characters), and then press
. 4. Press [
] or [
] to select a phone number type
(A to E), and then press
. 5. Enter the phone number (max. 32 digits), and then press
. 6. Repeat steps 4 and 5 to add additional phone number types.
] or [
7. Press [
then press
] to select "Category Off", and
. 8. Select a category, and then press 9. To select a default number for the entry, press [
] to select "Default Tel No", and then press
. 10. Press [
] to select the number to use as the
] or [
or [
. default number, and then press
. 11. Press
. Note Steps 7 and 8 can be omitted if you do not want to assign a category. Steps 9 and 10 can be omitted if you do not want to assign a default number. (The first number entered for an entry will automatically be assigned as the default number.) The valid digits are "0" through "9", "
"+". For details about entering characters, see
"Entering Characters (Page 40)". If an item with the same name and number exists, the new information added will be merged with the existing item.
", "#", and Editing a Stored Item You can edit the information stored in phonebook entries. 1. Press 2. Press [
press and search for the desired entry.
] to display the desired entry, or
] or [
Document Version 2012-05 Operating Instructions 35 Customizing the Telephone 3. Press 4. Press [
. to open the phonebook sub-menu.
] to select "Edit", and then press
] or [
5. Edit the name, phone number, category, and default number setting as necessary. 6. Press
. Note
] to highlight it, press
] or to delete it, and To change a character or digit, press [
then enter the new character or digit. To clear an entire line, press and hold more than 1 second. To move the cursor to the left or right, press
For details about searching for an item in the phonebook, see "Searching for an Item in the Phonebook (Page 27)". For details about entering characters, see
"Entering Characters (Page 40)".
], respectively.
] or [
for Storing an Item Using Predialing You can dial a number first and then add it as a phonebook entry. 1. 2. Press 3. Enter a name (max. 24 characters), and then press In standby mode, dial a number. 4. Press [
] or [
] to select a phone number type
(A to E), and then press
. 5. Enter the phone number (max. 32 digits), and then press
. 6. Repeat steps 4 and 5 to add additional phone number types.
] or [
7. Press [
then press
] to select "Category Off", and
. 8. Select a category, and then press 9. To select a default number for the entry, press [
] to select "Default Tel No", and then press
. 10. Press [
] to select the number to use as the
] or [
or [
. default number, and then press
. 11. Press
. Note Steps 7 and 8 can be omitted if you do not want to assign a category. Steps 9 and 10 can be omitted if you do not want to assign a default number. (The first number entered for an entry will automatically be assigned as the default number.) For details about entering characters, see
"Entering Characters (Page 40)". Storing an Item Using the Incoming or Outgoing Call Log You can add a number listed in the incoming or outgoing call log to the phonebook. 1. In standby mode, press [
Call Log or press [
] to open the Incoming
] to open the Outgoing Call Log. 2. Press [
3. Press 4. Press [
then press
] or [
] to select a record in the log.
] or [
to open the phonebook sub-menu.
] to select "Save Phonebook", and
. 5. Edit the name if desired, and then press 6. Press [
] to select a phone number type
] or [
(A to E), and then press
. 7. Edit the phone number if desired, and then press
. 8. Repeat steps 6 and 7 to add additional phone number types.
] or [
9. Press [
then press
] to select "Category Off", and
. 10. Select a category, and then press 11. To select a default number for the entry, press [
] to select "Default Tel No", and then press
. 12. Press [
] to select the number to use as the
] or [
or [
. default number, and then press
. 13. Press
. Note Steps 9 and 10 can be omitted if you do not want to assign a category. Steps 11 and 12 can be omitted if you do not want to assign a default number. (The first number entered for an entry will automatically be assigned as the default number.) For details about entering characters, see
"Entering Characters (Page 40)". 36 Operating Instructions Document Version 2012-05 Editing Category Names You can edit the names of the categories in the phonebook. 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
then press 4. Press [
] or [
then press
] to select "Display Option", and
] to select "Category Name", and
. 5. Press [
] or [
] to select the desired category number (19), and then press
. 6. Enter a name for the category (max. 13 characters), and then press
. 7. Repeat steps 5 and 6 for each category name to edit. Note For details about entering characters, see
"Entering Characters (Page 40)". Phonebook and vCard Transfer by Bluetooth Transferring Phonebook Data from a Cell Phone using Bluetooth You can transfer the phonebook data of a cell phone to the handset using Bluetooth wireless transmission. For details about Bluetooth, see "Bluetooth (Page 31)". Notice The cell phone must support PBAP (Phone Book Access Profile) to use this function. To transfer the phonebook data of a registered cell phone to the handset 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
. 4. Press [
press 5. Press [
press
] or [
] or [
] to select "Cell Phone", and then
] to select "Phonebook", and then Customizing the Telephone 6. Press 7. Press [
] or [
8. Press [
] or [
then press name)", and then press
] to select "1:(your cell phone
] to select "Auto" or "Manual", and
. If you select "Auto", the download will started automatically. If you select "Manual", operate the transfer from the cell phone to start the download. To transfer the phonebook data of an unregistered cell phone to the handset 1. Press 2. Select "
or the [CENTER] navigation key. Setting Handset" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select "Bluetooth Option", and then press
] to select "Cell Phone", and then
] to select "Phonebook", and then 4. Press [
press 5. Press [
press 6. Press 7. Press [
] or [
] or [
] or [
] to select "2:Other Cell", and
. 8. When "Transfer Phonebook From Cell then press Phone" is displayed, start the transfer by operating the cell phone. Note For details about registering a cell phone, see
"Registering and Deregistering a Cell Phone for Phonebook Transfer (Page 33)". Phonebook transfer and the Bluetooth headset functions cannot be operated at the same time. If a call is received during a transfer, only the phonebook data transferred before the call was received is saved to the handset phonebook. If the transfer was not fully completed,
"Completed" is displayed, and details of what was not transferred will be shown. If the phonebook is locked, the temporary unlocking screen will be displayed, and you will need to temporarily unlock to continue. For details, see "Unlocking the Phonebook Temporarily (Page 42)". While transferring phonebook data from a cell phone using Bluetooth, the Bluetooth pictograph will not be displayed on the screen of the handset (see "Display (Page 18)"). Document Version 2012-05 Operating Instructions 37 Selecting the Type of Hot Key Dialing You can select one of 2 types of Hot Key Dialing for each assigned Hot Key. If "Manual" is selected, pressing and holding an assigned Hot Key for the set number of seconds will display the Hot Keys information. Then, pressing dials the Hot Keys assigned number. If "Auto" is selected, pressing and holding an assigned Hot Key for the set number of seconds will dial that Hot Keys assigned number immediately. 1. In standby mode, press and hold a dial key (09) for more than 1 second. 2. Press 3. Press [
] or [
then press
] to select "Automatic Call", and
. 4. Select "Manual" or "Auto", and then press Note To select the number of seconds before the call is automatically made, see "Key Option
(Page 47)". Customizing the Telephone Transferring vCard Data using Bluetooth vCard is a standard file format for an electronic business card. A vCard can include a name and phone numbers. You can save this vCard data to the handset using Bluetooth wireless transmission. Note Only version 2.1 of vCard is supported. If both the name and phone number of a phonebook item being transferred corresponds with existing data in the handset, the phonebook item will not be transferred. Also, phonebook entries without any phone numbers entered will not be transferred to the handset. If multiple phone numbers exist for one name item, only the first 6 phone numbers received will be saved. Any numbers beyond the first 6 received will not be saved to the handset. Phone numbers that contain more than 32 digits will not be saved to the handset. Phonebook names can contain up to 24 characters. Names over 24 characters in length will be shortened to 24 characters when transferred. Note that if extended characters are used, the length of the name transferred may be further reduced. Assigning Hot Keys You can assign a phone number stored in the phonebook to a key to be used as a Hot Key. 1. In standby mode, press and hold a dial key (09) for more than 1 second. 2. Press 3. Press [
] or [
] to select "Copy from P.book", and then press
. 4. Press [
] or [
to search for an entry, and then press
] to select an entry, or press
. 5. Press [
. 6. Press
] or [
] to select a number, and then press
. Note For details about searching for an item in the phonebook, see "Searching for an Item in the Phonebook (Page 27)". 38 Operating Instructions Document Version 2012-05 Customizing the Telephone c. Enter a time of day using the Navigator Keys and/or dial keys, and then press 6. Enter a text message to be displayed when the
. Memo Alarm occurs, and then press
. 7. Press
. Note For details about entering characters, see
"Entering Characters (Page 40)". When entering a time of day, press toggle between AM or PM. displayed if 24-hour-time display is set. to will not be Deleting a Memo Alarm 1. Press 2. Select "
or the [CENTER] navigation key. Memo Alarm" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select an alarm number (13), and then press
] to select "Yes", and then press
] or [
4. Press [
. Stopping a Memo Alarm While the alarm is ringing, press or set the handset on the charger.
, Memo Alarm Setting An alarm will sound at the set time. A memo can also be displayed. Memo Alarm is available only when the handset is within range of a CS. Note You can select the ringer pattern and LED pattern for each Memo Alarm. For details, see
"Incoming Option (Page 45)". If you are on a call at the time that the alarm is set to sound, it will sound after you have ended the call. Setting a Memo Alarm 1. Press 2. Select "
or the [CENTER] navigation key. Memo Alarm" by pressing the arrow keys, and then press
. 3. Press [
] or [
] to select an alarm number (13), and then press
] or [
] to select an alarm mode, and then 4. Press [
press The alarm modes are as follows:
Off: Disables the selected Memo Alarm. Once: The selected Memo Alarm will occur only Daily: The selected Memo Alarm will occur at Weekly: The selected Memo Alarm will occur at the same time on selected days of the week. the same time every day. once. 5. Set the time and date for the Memo Alarm. The information to enter depends on the alarm mode. Once: Enter the date and time, using the Navigator Keys and/or dial keys, and then press
. Daily: Enter the daily time, using the Navigator
. Keys and/or dial keys, and then press Weekly:
a. Press [
] or [
] to select a day of the week,
. A and then press displayed next to each day of the week that has been selected. In this way, you can select multiple days of the week. mark will be b. After selecting 1 or more days of the week, press
. Document Version 2012-05 Operating Instructions 39 Customizing the Telephone Entering Characters You can enter characters and digits using the dial keys. You can select one of 3 character modes by pressing the Right Soft Key while entering a name. The function icon above the soft key displays the current character mode. For a list of available characters, see "Character Mode Table (Page 41)". To change the character mode while editing a name in the phonebook, press the right soft key. Alphabetic Numeric Extended 1 Example: To enter "Anne" in Alphabetic Mode. To switch between uppercase and lowercase, press To enter a character located on the same dialing key as the previous character, move the cursor by pressing the Navigator Key [
If you enter a different character by mistake, press the Navigator Key [
press To clear an entire line, press To move the cursor, press the Navigator Key [
to delete it, and then enter the correct character. for more than 1 second.
], then enter the desired character.
] to highlight the character,
] or [
] or [
]. 40 Operating Instructions Document Version 2012-05 A, aB, bC, c(RIGHT)(RIGHT)(RIGHT) Customizing the Telephone Character Mode Table Keys ABC (Alphabetic) Upper Lower 09
(Numeric)
+ (Extended 1) Upper Lower 1 2 3 4 5 6 7 8 9 0
Press Pressing a key repeatedly will cycle through the characters associated with that key. For example, to enter the before or after entering a character to change between uppercase and lowercase. letter "C" in Alphabet Mode, press The illustrations of the keys in the table may differ in appearance from the actual keys on the handset. 3 times. Document Version 2012-05 Operating Instructions 41 CEceOPER ! ? " : ; + = < > 0Space ! ? ,, : ; + = < > 0$ % & @ $ % & @ Customizing the Telephone Locking the Handset Phonebook You can lock/unlock the phonebook while the handset is in standby mode. If no password has been set, you cannot lock the phonebook. For details about setting the password, see "Setting the Password (Page 16)". Locking/Unlocking the Phonebook To lock Press and hold for more than 2 seconds. will be displayed. To unlock 1. Press and hold 2. Enter your password. 3. Press to return to standby mode. for more than 2 seconds. Unlocking the Phonebook Temporarily 1. Press
. 2. Enter your password. Deleting Stored Items Phonebook 1. Press [
] or 2. Press [
] or [
to display the phonebook.
] to select an item, or press to search for an item. 3. Press 4. Press [
. 5. Press [
] or [
] to select "Delete", and then press
] or [
] to select "Yes", and then press Hot Key Dial 1. Press and hold the dialing key assigned as a Hot Key for more than 1 second. 2. Press 3. Press [
. 4. Press [
] or [
] to select "Delete", and then press
] or [
] to select "Yes", and then press Note In step 1 while the Hot Keys information is displayed, you can press [
] to select another Hot Key number. In step 3, you can select "Delete All" instead to delete all items.
] or [
Incoming/Outgoing Call Log 1. In standby mode, press [
Call Log or press [
] to open the Incoming
] to open the Outgoing Call Log. 2. Select an item stored in the call log, and then press
. 3. Press [
. 4. Press [
] or [
] to select "Delete", and then press
] or [
] to select "Yes", and then press Note In step 3, you can select "Delete All" instead to delete all items. Note In step 4, you can select "Delete All" instead to delete all items. For details about searching for an item in the phonebook, see "Searching for an Item in the Phonebook (Page 27)". 42 Operating Instructions Document Version 2012-05 Customizing the Telephone Changing Handset Settings Handset Setting Menu Layout
[Main Item]
Setting Handset Incoming Option Talk Option Answer Option Key Option Display Option
[Sub Item]
Ringer Volume Ringer Type Vibrate Ring On Charger Memo Alarm Power Save Headset Ringer Speaker Volume Receiver Volume Headset Volume Headset Mic Vol Talk On Charger Any Key Answer Quick Answer Auto Ans Delay Soft Key Edit Soft Key Name Key Lock Type Auto Lock Time Hot Key Time Language Backlight LCD Brightness Standby Display Category Name Date Format Time Format Caller ID Disp Color Scheme Document Version 2012-05 Operating Instructions 43 Customizing the Telephone Tone Option System Option Bluetooth Option Other Option Key Tone Range Alarm Register H/S Cancel Base Select Base System Lock Change PIN H/S Information Firmware Update*1 Enable CS Web*1 On/Off Cell Phone BT Headset Change Password Reset Handset MasterCS Address
*1 These settings are made available through Web user interface programming. For details, consult your administrator or dealer. 44 Operating Instructions Document Version 2012-05 Customizing the Telephone Description Setting Default Incoming Option Sub Item Ringer Volume Adjusts the ringer volume. Ringer Type Default Private Ring
(Category 1-9) Ringer Pattern Selects the ringtone for each type of call.*1 LED Pattern Selects the LED pattern for each type of call. Vib. Pattern Selects the vibrate pattern for each type of call. Color Pattern*2 Selects the color pattern for each type of call. Selects whether the handset vibrates while receiving a call. Selects the ringing mode (On or Off) while a handset is set on the charger.*3 Ringer Pattern Selects the ringtone for each Memo Alarm. LED Pattern Selects the LED pattern for each Memo Alarm. Vibrate Ring On Charger Memo Alarm Step Up Step Down Level 16 Off Ringtone 119, 2532 Red Green Orange R G O Single Double Triple Continuous Normal Yellow Red Vib.& Ring Vib. Ring Off On Off Level 3 Ringtone 1 Default: Red Private Ring: Green Single Normal Off On Ringtone 119, 2532 Ringtone 1 Red Green Orange R G O Green Document Version 2012-05 Operating Instructions 45 Customizing the Telephone Sub Item Description Vib. Pattern Selects the vibrate pattern for each Memo Alarm. Power Save Headset Ringer Power Save Time Selects the number of seconds before automatically turning off the Power Save Items below when receiving a call. Power Save Item Selects the items to turn off. Selects whether a tone is heard from the attached headset while receiving a call. Setting Single Double Triple Continuous Default Single 060 s 30 s Ringer&Vibrate Backlight On Off Not selected Off
*2
*1 The preset melodies in this product are used with permission of 2010 Copyrights Vision Inc. Displayed only when "Private Ring" is selected.
*3 When "Ring On Charger" is set to "On" but "Ringer Volume" is set to "Off", the handset rings at level 1. Talk Option Sub Item Speaker Volume Receiver Volume Headset Volume Headset Mic Vol Talk On Charger Description Setting Adjusts the rear speaker volume. Level 16 Adjusts the receiver volume. Level 16 Adjusts the headset speaker volume. Level 16 Adjusts the headset microphone volume. Selects whether or not to continue the conversation when the handset is put on the charger during a conversation. Level 16 Default Level 3 Level 2 Level 2 Level 3 Off Answer Option Sub Item Description Any Key Answer Quick Answer Answers a call while the phone is Answers a call by pressing any dialing key. charging by just lifting up a handset from the charger. Setting Default Off Off On Off On Off On Off 46 Operating Instructions Document Version 2012-05 6 s Default Not stored Customizing the Telephone Description Setting Default Selects the number of seconds before a call is automatically answered when Auto Answer is turned on. 020 s Sub Item Auto Ans Delay Key Option Sub Item Soft Key Edit Softkey A Softkey B Softkey C Soft Key Name Softkey A Softkey B Softkey C Key Lock Type Setting Default Flexible Key Function Key Hot Key Dial*1 Description Edits the soft keys. Standby Talking Edits the names of the soft keys. Standby Talking Selects the type of key lock. Max. 5 characters Not stored Manual Manual&Password*2*3 Auto Auto&Password*2*3 060 s 120 s Manual 10 s 2 s Auto Lock Time Sets the number of seconds before the handset key lock is activated when
"Auto" is selected as the Key Lock Type. Hot Key Time Selects the number of seconds before a call is automatically made when a Hot Key assigned to "Auto" is pressed and held.
*1
*2
*3 Displayed only when "Standby" is selected. To avoid unauthorized access to this product:
Set a password that is random and cannot be easily guessed. Change the password regularly. If no password has been set, you cannot select "Manual&Password" or "Auto&Password" for "Key Lock Type". For details about setting the password, see "Setting the Password (Page 16)". Document Version 2012-05 Operating Instructions 47 Customizing the Telephone Display Option Sub Item Language Backlight LCD Brightness Standby Display Category Name Date Format Time Format Caller ID Disp Description Setting Default Selects the display language. Turns on the backlight of the LCD and keypad. Can be set for each of the following:
Receiving Talking Adjusts the brightness of the backlight of the LCD. Selects what is shown on the display while in standby mode.*1 Edits the name displayed on the LCD while in standby mode. Edits the names of the categories. Selects the format for the date shown on the display in standby mode. Selects the format for the time shown on the display in standby mode. Selects which caller information is displayed when a call is received. Either the information stored in the handsets phonebook or the phone system can be displayed. English Espaol FRANAIS On Off Level 16 H/S No. Base & H/S No. Edit Off Max. 16 characters Max. 13 characters per Category (19) DD-MM-YYYY MM-DD-YYYY YYYY-MM-DD 12H 24H H/S Phonebook PBX Setting Dark Light English Receiving: Off Talking: On Level 3 H/S No. Not stored Not stored MM-DD-YYYY 12H PBX Setting Dark Color Scheme Selects the color scheme of the LCD.
*1 If an extension name is assigned through Web user interface programming, the extension name is displayed when "H/S No." or "Base
& H/S No." is selected. Depending on the number of characters stored for the extension name, the end of the extension name may not be displayed. 48 Operating Instructions Document Version 2012-05 On On Default Not stored Not selected Auto Off 1234 Customizing the Telephone Description Setting Default Tone Option Sub Item Key Tone Range Alarm Turns the key tone on or off. Selects whether the range alarm tone rings or not. On Off On Off System Option Sub Item Description Register H/S Registers a handset to a base. Cancel Base*1 Cancels the registration of a handset. Select Base*1 Selects a base. System Lock Change PIN H/S Information Selects whether to lock the System Option setting or not. Before registering your handset with a phone system, enter the phone systems PIN here. Once you have registered the handset with a phone system, this PIN can be changed so that the handset can be registered to an additional phone system. Displays the firmware version and the IPEI (International Portable Equipment Identity) number of the handset. Setting Base 14 Base 14*2 Auto Base 14 On*3 Off Enter the PIN number.
(max. 8 digits)
*1 Only registered bases are shown.
*2 You can select multiple bases simultaneously. Password is required (4 digits). For details about setting the password, see "Setting the Password (Page 16)".
*3 Bluetooth Option Sub Item On/Off Description Setting Turns the Bluetooth function on or off. On Off Default Off Document Version 2012-05 Operating Instructions 49 Customizing the Telephone Sub Item Cell Phone BT Headset Description Setting Default Phonebook Receives the phonebook from a cell phone by Bluetooth. Registration Registers or deregisters a cell phone. Change BT PIN Sets or changes the Bluetooth PIN number. Connection*1 Connects or disconnects a Bluetooth headset. Registration Registers or deregisters a Bluetooth headset. Headset Mic Vol Adjusts the microphone volume of the Bluetooth headset. Register Deregister Not registered Enter the PIN Code. (4 digits) Not registered On Off Register Deregister Level 16 On Not registered Level 3
*1 If a Bluetooth headset has not been registered yet, the "Registration" screen of "BT Headset" is displayed when this option is selected. Other Option Sub Item Change Password*1*2 Description Setting Default Changes the handset password (4 digits) used for unlocking the phonebook, using the Reset Handset option, and unlocking the key lock. Enter Old Password.*3 Enter New Password. Not registered Reset Handset Returns the handset settings to its default settings. MasterCS Address Displays the IP address of the Master CS. If the handset is not yet registered,
"xxx.xxx.xxx.xxx" will be displayed.
*1 To avoid unauthorized access to this product:
Set a password that is random and cannot be easily guessed. Verify New Password. Enter Password.*4
(4 digits) Select the desired item(s). Press
. Not selected 50 Operating Instructions Document Version 2012-05 Change the password regularly.
*2 Make a note of the password so that you will not forget it.
*3 If a password has not already been set, you can skip the first step. For details about setting the password, see "Setting the Password (Page 16)".
*4 Customizing the Telephone Document Version 2012-05 Operating Instructions 51 Installation and Setup Installation and Setup Battery Installation Open the battery cover, insert the battery, and close the cover as indicated below. Charger Connection Connect the AC adaptor to the charger. The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Fasten the AC adaptor cord to the cord holder. Use only the included Panasonic AC adaptor. For details, see "Accessory Information (Page 13)". WARNING To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords. Do not bundle the chargers AC adaptor cord with the power cords of machines located nearby. Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. 52 Operating Instructions Document Version 2012-05 HooksTo AC Outlet Charging the Battery At the time of shipment, the battery is not charged. Please charge the battery for about 3 hours before using the handset for the first time. Installation and Setup The charge indicator will turn off when the battery is fully charged. For more information about charging the battery, see "Battery Information
(Page 11)". It is normal for the handset and charger to feel warm while the battery is charging. Keep devices sensitive to magnetic fields away from the charger. Use only the included charger. Charger Wall Mounting 1. Install the two screws in the wall, spacing them 25 mm (1 in) apart. 2. Mount the charger securely on the wall. Please copy this page and use as a reference for wall mounting. Make sure to set the print size to correspond with the size of this page. If the dimension of the paper output still deviates slightly from the measurement indicated here, use the measurement indicated here. When mounting the charger, ensure that the correct screws are used for the type of wall. Make sure that the wall that the charger will be attached to is strong enough to support the total weight of the handset and charger (approx. 135 g [0.30 lb]). If not, it is necessary for the wall to be reinforced. When this product is no longer in use, make sure to detach it from the wall. When inserting screws, avoid pipes and electrical cables, etc, that may be present/buried. Certain types of wall may require plugs to be anchored in the wall before the screws are inserted. The screw heads should not be flush to the wall. Document Version 2012-05 Operating Instructions 53 25 mm(1 in)for charger20 mm (3/4 in) or longerSpace2 mm (1/16 in) Recommended screw size is M4 x 20.25 mm(1 in)Screws(Not supplied) Installation and Setup Attaching the Belt Clip You can attach the handset to your belt by following the steps below.
[To attach]
1. 2. Slide the clip into the holder until it clicks. Insert the clip into the designated notches in the handset.
[To remove]
1. Make sure to turn the handset 180 when you take it off. 2. Remove the belt clip. Attaching the Phone Strap Open the battery cover, run the strap through the strap hole, and then loop it around the hook. 54 Operating Instructions Document Version 2012-05 Appendix Appendix Specifications Item Specifications Display Headset Jack Battery Maximum Power Consumption
(Charger) Battery Performance Charging Time Dimensions
(Width Depth Height) Weight Operating Environment 1.8-inch TFT Backlight LCD, 65,000 colors 1 ( 2.5 mm [3/32 in]) Li-Ion 3.7 V (700 mAh) Standby: 0.3 W Maximum: 4.0 W Talk: up to 13 hours Standby: up to 200 hours 3 hours Handset only:
48.5 mm 17.9 mm 127.5 mm
(1.91 in 0.70 in 5.02 in) Handset on charger:
63.0 mm 78.0 mm 140.0 mm
(2.48 in 3.07 in 5.51 in) Handset (including battery): 88 g (0.19 lb) Handset (including battery) and charger: 135 g (0.30 lb) 0 C to 40 C (32 F to 104 F) 5 C to 40 C (41 F to 104 F) (When charging) RF Specifications (DECT 6.0) Item Frequency Band Number of Carriers Transmission Output RF Specifications (Bluetooth) Item Frequency Band Class Specifications 1920 MHz to 1930 MHz 5 Peak 115 mW Specifications 2.4000 GHz to 2.4835 GHz Class 2 Document Version 2012-05 Operating Instructions 55 Appendix Troubleshooting Problem Possible Cause Solution The handset does not work. The battery is drained. The power is off. The handset does not ring. You cannot make/
receive a call. You cannot dial. icon is is displayed.) Ringer volume is set to "Off".
(If the ringer volume is set to
"Off", Silent Mode is on.
(If Silent Mode is on, the displayed.) The handset is out of range, or the CS is busy. The radio channel is busy, or a radio communication error occurred. The number that you dialed is restricted by your phone system. Key lock mode is on. The radio channel is busy or a radio communication error occurred. An unknown error has occurred. The handset stops working during operation. Charge the battery fully. For details, see "Charging the Battery
(Page 53)". Turn it on. For details, see "Location of Controls (Page 14)". Re-insert the battery, and then set the handset on the charger. For details, see "Battery Installation (Page 52)", and
"Charging the Battery (Page 53)". Adjust the ringer volume level. For details, see "Adjusting the Ringer Volume (Page 24)". Turn off Silent Mode. For details, see "Silent Mode
(Page 16)". Move closer to the CS or try again later. Try again later. Consult your administrator or dealer. To cancel the mode, press and hold for about 2 seconds. For details, see "Key Lock
(Page 16)". Try again later. Turn the handset off, and then turn it back on. For details, see "Location of Controls (Page 14)". Re-insert the battery and try again. For details, see "Battery Installation (Page 52)". You cannot use the handset during a power failure. The handset will not function during a power failure because the CS stops emitting radio waves. 56 Operating Instructions Document Version 2012-05 Problem Possible Cause Solution Appendix The headset does not work. The headset ringer cannot be heard when receiving an incoming call when the headset is attached. Make sure the headset ringer setting is set to "On". For details, see "Incoming Option
(Page 45)". Make sure the headset jack is connected properly. For details, see "Location of Controls (Page 14)". The tone from the Bluetooth headset cannot be changed. Noise is frequently heard. Two short beeps are heard during a conversation. You charged the battery for 3 hours, but the beep tones sound, and " " flashes
(needs to be charged) after a few telephone calls. While charging the battery, the handset and the AC adaptor feel warm.
"No Service" is displayed, and beep tones are heard. While charging the battery, the LED indicator blinks rapidly, but the handset does not beep. While charging the battery, the LED indicator blinks rapidly and the handset beeps rapidly. The Bluetooth headset tone is a specific tone and is not related to the Incoming Option settings
(Ringer Type). Nearby electrical appliances are causing interference, or you are too far from the CS. The radio signal is weak. Place the handset and CS away from other electrical appliances. Move closer to the CS. Move closer to the CS. The battery charge contacts may be dirty. It is time to change the battery. Clean the battery charge contacts without damaging them and charge once more. Replace with a new battery. These are normal conditions. The handset is out of range. The CS or phone service is out of service. The temperature of the battery being charged is outside of normal limits. Move closer to the CS or try again later. Consult your administrator or dealer. Confirm that the area where the handset is being charged is between 5 C (41 F) and 40 C (104 F), and wait for the batterys temperature to drop. The battery is not charging correctly due to an electrical failure. Unplug the AC adaptor from the AC outlet, remove the battery from the handset, and consult your dealer. Document Version 2012-05 Operating Instructions 57 Appendix Problem Possible Cause Solution I cannot copy the phonebook entries from my cell phone. The cell phone does not support the Bluetooth function. Confirm that the cell phone supports Bluetooth wireless technology. Confirm that the cell phone supports the Object Push Profile
(OPP) or Phone Book Access Profile (PBAP) specification. If the cell phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cell phone. Turn the cell phone off, and then turn it on and try again. A connection error has occurred. I cannot have a conversation using a Bluetooth headset. The Bluetooth headset is not registered to the handset. A connection error has occurred. A wired headset is also connected to the handset. The Bluetooth headset is out of range of the handset. Noise is heard during a call on the Bluetooth headset. The Bluetooth headset is too far away from the handset. Register the Bluetooth headset to the handset. For details, see "Registering a Bluetooth Headset (Page 32)". Turn the Bluetooth headset off, and then turn it on and try again. Disconnect the wired headset from the handset, and try again. The Bluetooth headset can communicate within a certain range of the handset. The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the handset, and try again. The Bluetooth headset can communicate within a certain range of the handset. The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the handset. 58 Operating Instructions Document Version 2012-05 Problem Possible Cause Solution Appendix I cannot connect a Bluetooth headset to the handset. The Bluetooth headset or the Bluetooth function of the handset is off. A connection or registration error has occurred. Confirm that the Bluetooth headset is turned on. Confirm that the Bluetooth setting of the handset is turned on. For details, see "Turning Bluetooth On or Off (Page 31)". If the Bluetooth headset is already registered to another Bluetooth device such as a cell phone, disconnect the Bluetooth headset from the cell phone, and then perform the connection procedure from the handset. The Bluetooth headset is not registered to the handset. Register the Bluetooth headset. For details, see "Registering a Bluetooth Headset (Page 32)". Some headset features are not functioning. An error tone is heard when I try to connect a Bluetooth device to the handset. The handset does not support enhanced features such as last number redial or call reject. The Bluetooth function is not ready. The Bluetooth function cannot be accessed immediately after turning on the handset. Wait a few seconds and try again. A connection could not be made between the handset and the Bluetooth device. Wait a few seconds and try again. I cannot remember the PIN number. The "Delete All"
operation to delete all phonebook entries is not functioning. Consult your administrator or dealer. The battery is drained, which prevents the operation from being completed. Charge the battery fully, then try again. For details, see "Charging the Battery (Page 53)". Document Version 2012-05 Operating Instructions 59 Appendix Error Messages Error Message Register Unit No Service CS Busy Charge Battery No Entries Memory Full Need Repair System Locked Password Not Stored Transfer Error Register Error Restricted Error Possible Cause Solution The handset has been cancelled or the handset has not been registered. The handset is out of range. The CS is turned off. The CS is busy. The handset battery has little charge remaining. When trying to view the phonebook: No items have been stored. For details, see "Storing an Item in the Handset Phonebook
(Page 35)". When trying to view the Incoming or Outgoing Call Log: No logs have been stored. The phonebook is full and cannot store the new item. There is an error with the fixed internal memory. The System Option menu has been locked and cannot be accessed. Displayed when you access a feature that requires a password, but a password has not been set. A connection with a cell phone has been interrupted. Handset registration has failed or a time-out has occurred. You have tried to make an outside call that is restricted by the phone system. An error message is received from the CS when trying to change FWD/DND status. Consult your dealer. Move closer to the CS. Make sure the power cord is connected. Try again later. Charge the battery fully. For details, see "Charging the Battery
(Page 53)". Remove unnecessary data in the phonebook and try again. Consult your dealer. Consult your administrator or dealer. Set a password. See "Setting the Password (Page 16)". Perform the connection procedure with the cell phone again. For details, see "Transferring Phonebook Data from a Cell Phone using Bluetooth
(Page 37)". Wait and try again, or consult your administrator or dealer. Consult your administrator or dealer. Try again, or consult your administrator or dealer. 60 Operating Instructions Document Version 2012-05 Error Message Possible Cause Solution Appendix Aborted Phonebook Error Download Failed
<ERROR1>/<ERROR2>
Downloading Aborted Connect Error Disconnect Error There was a wireless transmission error during a phonebook download or upload. There was a wireless transmission error, corrupted data, or the memory became full during a phonebook download. There was an error during a PS firmware update. There was a hardware error during a PS firmware update. A phonebook download operation was aborted. The number of items that were being downloaded will also be displayed. An error occurred when establishing a Bluetooth headset connection. An error occurred when deregistering a headset that has been registered to the handset. Link Error An error occurred during a phonebook download. BT Headset Link Error The Bluetooth headset is out of range of the handset. Use the PS closer to the CS. Remove unnecessary data in the phonebook, or consult your administrator regarding the number of items being downloaded. Use the PS closer to the CS. Consult your administrator or dealer. Consult your administrator or dealer. Ensure the handset and the other device are within range of each other, and then perform the download operation again. Do not move either unit until the download is completed. Ensure the headset is operating correctly, and then try to establish the connection with the handset again. Ensure the handset and the headset are within range of each other, and then perform the deregistration operation again. Ensure the handset and the other device are within range of each other, and then perform the download operation again. When you are using a Bluetooth headset, always keep the handset within range. We recommend keeping the handset and headset within 1 m (3.28 ft) of each other for best performance. Document Version 2012-05 Operating Instructions 61 Appendix Error Message Completed
(Information) Possible Cause Solution During a phonebook download, some data was not transferred. If an entry with the same name already exists in the handsets phonebook, only a total of 6 numbers can be registered to that entry. Once 6 phone numbers have been registered to a name, any additional numbers will not be downloaded. Phone numbers longer than 32 digits in length are not downloaded to the handsets phonebook. Before downloading, confirm that the source data does not contain more phone numbers than can be downloaded for each name, and does not have any phone numbers greater than 32 digits in length. Check the data downloaded to the handset after the error message is displayed, and edit the phonebook contents as necessary. 62 Operating Instructions Document Version 2012-05 Index A AC adaptor 13 Accessories 13 Advanced Voice Clarity 17 B Battery 13 Charging 53 Installation 52 Battery information 11 Belt clip 13 Attaching 54 Belt clip holder 13 Bluetooth 31 C Call Forwarding 30 Call Log Deleting 42 Making a call 26 Storing to phonebook 36 Call Waiting 30 Caller ID 28 Calls Holding 29 Making 26 Receiving 28 Transferring 29 Category names, editing 37 Characters Available characters 41 Entering 40 Charger 13 Connection 52 Wall mounting 53 Conference 29 Controls, locations of 14 D Display language 24 Do Not Disturb (DND) 30 E Error messages 60 F Flexible Keys 21 Editing names 24 Function keys 23 Function menus 23 H Headset volume 25 Hold 29 Index Hot Key Assigning 38 Deleting 42 Dialing 26 K Key Lock 16 L Lock Keys 16 Phonebook 42 M Memo Alarm 39 Message Waiting 31 O One-touch Dialing 26 Operation outline 22 P Phone strap, attaching 54 Phonebook 35 Category names, editing 37 Deleting 42 Editing 35 Locking 42 Searching 27 Storing from call log 36 Storing from predial 36 Storing new 35 Phonebook and vCard by Bluetooth 37 Power Save Mode 17 Private Ring 35 R Receiver volume 25 Ringer volume 24 S Settings 43 Answer Option 46 Bluetooth Option 49 Display Option 48 Incoming Option 45 Key Option 47 Other Option 50 System Option 49 Talk Option 46 Tone Option 49 Silent Mode 16 Soft Keys 19 Speaker volume 25 Specifications 55 Standby display number 24 Document Version 2012-05 Operating Instructions 63 Index T Text, entering 40 Three-party conference 29 Transferring a call 29 V Vibrate 24 Voice Mail 31 Volume Receiver/Speaker/Headset 25 Ringer 24 64 Operating Instructions Document Version 2012-05 Notes Document Version 2012-05 Operating Instructions 65 Copyright:Panasonic System Networks Co., Ltd. 2012This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.PNQX5288ZA DD0512MH0 (v0.004)One Panasonic Way, Secaucus, New Jersey 07094http://www.panasonic.com/sip5770 Ambler Drive, Mississauga, Ontario, L4W 2T3http://www.panasonic.ca
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-05-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 1921.536 ~ 1928.448 | PUE - Part 15 Unlicensed PCS portable Tx held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-05-29
|
||||
1 2 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 |
Newark, New Jersey 07102-5490
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
S******@nemko.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A3: Unlicensed Personal Communication System (PCS) devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ACJ
|
||||
1 2 | Equipment Product Code |
96NKX-UDT121
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B****** B******
|
||||
1 2 | Title |
Project Manager
|
||||
1 2 | Telephone Number |
201-3********
|
||||
1 2 | Fax Number |
201-3********
|
||||
1 2 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Panasonic Corporation of North America
|
||||
1 2 | Name |
R**** M****
|
||||
1 2 | Physical Address |
One Panasonic Way, 4B-8
|
||||
1 2 |
Secaucus, 07094
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
201-3********
|
||||
1 2 | Fax Number |
201-3********
|
||||
1 2 |
R******@us.panasonic.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/13/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | PUE - Part 15 Unlicensed PCS portable Tx held to ear | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DECT 6.0 Cordless Telephone Handset with Bluetooth Transceiver for SIP server or PBX | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is peak conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Highest reported SAR values: 0.02 W/kg | ||||
1 2 | Power listed is peak conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Highest reported SAR values: 0.02 W/kg. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Nemko AS
|
||||
1 2 | Name |
F****** S******
|
||||
1 2 | Telephone Number |
47-22********
|
||||
1 2 | Fax Number |
47-22********
|
||||
1 2 |
f******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 68 CC | 2402.00000000 | 2480.00000000 | 0.0009000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15D | 68 CC | 1921.53600000 | 1928.44800000 | 0.0720000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC