all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 1.05 MiB | April 02 2021 / September 30 2021 | delayed release | ||
1 2 |
|
Internal Photos-1 | Internal Photos | 4.52 MiB | April 02 2021 / September 30 2021 | delayed release | ||
1 2 |
|
Internal Photos-2 | Internal Photos | 4.89 MiB | April 02 2021 / September 30 2021 | delayed release | ||
1 2 |
|
Internal Photos-3 | Internal Photos | 3.53 MiB | April 02 2021 / September 30 2021 | delayed release | ||
1 2 |
|
External Photos | External Photos | 5.27 MiB | April 02 2021 / September 30 2021 | delayed release | ||
1 2 |
|
ID Label/Location Info | ID Label/Location Info | 112.43 KiB | April 02 2021 / April 06 2021 | |||
1 2 | Block Diagram | Block Diagram | April 02 2021 | confidential | ||||
1 2 |
|
Declaration of authorization | Cover Letter(s) | 57.05 KiB | April 02 2021 / April 06 2021 | |||
1 2 |
|
FCC RF Exposure Info | RF Exposure Info | 160.12 KiB | April 02 2021 / April 06 2021 | |||
1 2 | Operational Description | Operational Description | April 02 2021 | confidential | ||||
1 2 |
|
Request for non-disclosure | Cover Letter(s) | 54.81 KiB | April 02 2021 / April 06 2021 | |||
1 2 | Schematics L | Schematics | April 02 2021 | confidential | ||||
1 2 | Schematics R | Schematics | April 02 2021 | confidential | ||||
1 2 |
|
Test Report DTS | Test Report | 4.16 MiB | April 02 2021 / April 06 2021 | |||
1 2 |
|
Test Setup Photos DTS | Test Setup Photos | 1.23 MiB | April 02 2021 / September 30 2021 | delayed release | ||
1 2 |
|
Test Report DSS | Test Report | 4.94 MiB | April 02 2021 / April 06 2021 |
1 2 | Users Manual | Users Manual | 1.05 MiB | April 02 2021 / September 30 2021 | delayed release |
English This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone. Franais IMPORTANT SAFETY INSTRUCTIONS Use only the supplied USB charging cord when connecting to a computer. IMPORTANTES MISES EN GARDE EAH-AZ60 EAH-AZ40 INSTRUCCIONES DE SEGURIDAD IMPORTANTES Cuando conecte a un ordenador, utilice nicamente el cable de carga USB suministrado. Espaol Este aparato podra recibir interferencias de radio durante el uso causadas por telfonos mviles. Si se producen dichas interferencias, aumente la separacin entre este aparato y el telfono mvil. Limited Warranty (ONLY FOR U.S.A.) Technics Products Limited Warranty English Franais (Canada) Espaol Franais (Europe) Deutsch Portugus Italiano Polski esky Slovensky Magyar Romn Lietuvi Eesti keel Hrvatski Slovenina Svenska Dansk Suomi Norsk EAH-AZ60 EAH-AZ40 Digital Wireless Stereo Earphones Basic Owners Manual couteurs stro sans fil numriques Manuel dutilisation Fonctions de base Auriculares estreo inalmbricos digitales Instrucciones bsicas de funcionamiento Technics Audio Connect Android: Google Play English Expressions used in this document The product illustrations may differ from the actual product. Unless otherwise indicated, illustrations in these operating instructions are of EAH-AZ60. Marks denoting model names Functionality differences between models are indicated with the model marks below. EAH-AZ60: [EAH-AZ60]
EAH-AZ40: [EAH-AZ40]
Franais Expressions utilises dans ce document Les illustrations du produit peuvent diffrer du produit rel. Sauf indication contraire, les illustrations prsentes dans ce manuel dutilisation reprsentent le EAH-AZ60. Symboles diffrenciant les noms de modle Les diffrences de fonctionnalit entre les modles sont indiques par les symboles ci-dessous. EAH-AZ60 : [EAH-AZ60]
EAH-AZ40 : [EAH-AZ40]
Espaol Expresiones utilizadas en este documento Las ilustraciones del producto pueden diferir del producto real. Salvo indicacin contraria, las ilustraciones en estas instrucciones de funcionamiento corresponden al modelo EAH-AZ60. Marcas que denotan nombres de modelos Las diferencias de funcionalidad entre los modelos se indican con las siguientes marcas de modelo. EAH-AZ60 : [EAH-AZ60]
EAH-AZ40 : [EAH-AZ40]
English A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Franais Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. Espaol Una batera de litio reciclable alimenta el producto que ha comprado. Llame al nmero 1-800-8-BATTERY para ms informacin sobre cmo reciclar esta batera. iOS: App Store For US and Canada only Pour les .-U. et le Canada seulement English Using the app Technics Audio Connect By creating a Bluetooth connection with a smartphone on which the Technics Audio Connect app (free of charge) is installed, you can enjoy a wide variety of functions, such as different customized settings and software updates for this unit. For information, refer to Owners Manual (PDF format). Franais Utilisation de lappli Technics Audio Connect En tablissant une connexion Bluetooth avec un tlphone intelligent sur lequel lapplication Technics Audio Connect (gratuite) est installe, il est possible de bnficier dune grande varit de fonctions, comme divers rglages personnaliss et des mises jour logicielles pour cet appareil. Pour plus de dtails, consulter le Manuel dutilisation (format PDF). Espaol Uso de la aplicacin Technics Audio Connect Si crea una conexin Bluetooth con un telfono inteligente en el que est instalada la aplicacin Technics Audio Connect (gratuita), podr disfrutar de una amplia variedad de funciones, tales como diferentes ajustes personalizados y actualizaciones de software para este aparato. Para obtener ms informacin, consulte Instrucciones de funcionamiento (formato PDF). English Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Accessories Please check and identify the supplied accessories. To order accessories, contact the dealer from whom you have made your purchase. 1 x USB charging cord
[EAH-AZ60]
1 x Earpieces set (2 each of sizes XS, S, M, L, and XL) (L size fitted to the earphones)
[EAH-AZ40]
1 x Earpieces set (2 each of sizes XS, S, M, and L) (M size fitted to the earphones) Only for U.S.A.: To order accessories, refer to Limited Warranty. Franais Nous vous remercions davoir arrt votre choix sur cet appareil. Avant dutiliser lappareil, il est recommand de lire attentivement ce manuel dutilisation et de le conserver pour consultation ultrieure. Register online at http://shop.panasonic.com/support (U.S. customers only/Pour les .-U. seulement) Accessoires Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Do not use this apparatus near water. 2 Clean only with dry cloth. 3 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 4 Unplug this apparatus during lightning storms or when unused for long periods of time. Safety precautions THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA. This device complies with Part 15 of FCC Rules and Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation.
[EAH-AZ60]
FCC ID: ACJ-EAH-AZ60 Model: EAH-AZ60 IC: 216A-EAHAZ60 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
(For the U.S.A. only) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.
(For Canada only) EAH-AZxxxW has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
[EAH-AZ40]
FCC ID: ACJ-EAH-AZ40 Model: EAH-AZ40 IC: 216A-EAHAZ40 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suppliers Declaration of Conformity
[EAH-AZ60]
Trade Name: Panasonic Model No.: EAH-AZ60 Responsible Party:
[EAH-AZ40]
Trade Name: Panasonic Model No.: EAH-AZ40 Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support THE FOLLOWING APPLIES ONLY IN CANADA. CAN ICES-3(B)/NMB-3(B) The serial number of this product can be found on the bottom of the charging cradle. Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER User memo:
DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER If you have any questions, visit:
In the U.S.A.:
http://shop.panasonic.com/support In Canada:
www.panasonic.ca/english/support Pour toute assistance supplmentaire, visitez :
www.panasonic.ca/french/support Sales and Support Information Customer Communications Centre For customers within the UK: 0333 222 8777 For customers within Ireland: 01 447 5229 MondayFriday 9:00 am5:00 pm (Excluding public holidays). For further support on your product, please visit our website:
www.technics.com/uk/
[EAH-AZ60]
Manufactured by:
Authorized Representative in Europe:
Panasonic Corporation Kadoma, Osaka, Japan Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://shop.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.com Panasonic Corporation http://www.panasonic.com EU E Panasonic Corporation 2021 Printed in Malaysia/Imprim en Malaisie/Impreso en Malasia PNQW5932ZA F0221MH0 until 2021/05/07 Vrifier et identifier les accessoires fournis. Pour commander des accessoires, contacter le revendeur. Unit 1 x cordon de charge USB
[EAH-AZ60]
1 x ensemble doreillettes (2 de chaque taille TP, P, M, G et TG) (la taille G est place sur les couteurs)
[EAH-AZ40]
1 x ensemble doreillettes (2 de chaque taille XS, S, M et L) (la taille M est place sur les couteurs) Espaol Le agradecemos haber adquirido este producto. Lea cuidadosamente estas instrucciones antes de usar este producto, y guarde este manual para usarlo en el futuro. Accesorios Verifique e identifique los accesorios suministrados. 1 x Cable de carga USB
[EAH-AZ60]
1 x Set de auriculares (2 de cada uno de los tamaos XS, S, M, L y XL) (tamao L montado en los auriculares)
[EAH-AZ40]
1 x Set de auriculares (2 de cada tamao XS, S, M y L) (tamao M montado en los auriculares) English Only for European Union and countries with recycling systems These symbols indicate separate collection of waste electrical and electronic equipment or waste batteries. More detailed information is contained in Operating Instructions (PDF format). Espaol Solamente para la Unin Europea y pases con sistemas de reciclado. Estos smbolos indican que los equipos elctricos y electrnicos y las bateras gastadas no deben desecharse junto con otro tipo de residuos. Puede encontrar informacin ms detallada en las Instrucciones de funcionamiento (formato PDF). WARNING:
To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Use only manufacturers recommended accessories. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid the use in the following conditions High or low extreme temperatures during use, storage or transportation. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Extremely high temperature and/or extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. Do not place this unit near a heat source. Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. Keep this unit away from something susceptible to the magnetism. Such devices as a clock may not operate correctly. Be aware that this unit (earphones) may get warm while charging or immediately after charging. Depending on your constitution and health status, putting the earphones on may trigger adverse reactions such as skin redness, itching, and rash if the earphones have just been taken out of the charging cradle and are still warm. Built-in battery Do not heat or expose to flame. Do not leave the unit in a car exposed to direct sunlight for a long period of time with doors and windows closed. Earphones/Earpieces Keep the earphones and the earpieces out of reach of children and pets to prevent swallowing. After use, put them in the charging cradle and close the lid for storage. Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused. Allergies Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions. Precautions for listening with the Earphones Excessive sound pressure from earphones and headphones can cause hearing loss. Do not use your earphones at a high volume. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. The symbols on this product (including the accessories) represent the following:
DC Declaration of Conformity (DoC) Hereby, Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server:
http://www.ptc.panasonic.eu Contact to Authorized Representative: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany Type of wireless Frequency band Maximum power
(dBm e.i.r.p) Bluetooth 2,402 - 2,480 MHz 14 dBm This telecommunication equipment conforms to NTC/NBTC technical requirement. Complies with IMDA Standards DB01017 Specifications General Power supply
(Charging cradle) Internal Battery Operating time*1
(Earphones) Operating time*1
(Earphones i Charging cradle) EAH-AZ60 EAH-AZ40 DC 5 V, 500 mA Earphones: 3.7 V, Lithium polymer 85 mAh Charging cradle: 3.7 V, Lithium polymer 650 mAh Approx. XXX hours (Noise cancelling: ON, AAC) Approx. XXX hours (Noise cancelling: ON, SBC) Approx. XXX hours (Noise cancelling: ON, LDAC) Approx. XXX hours (Noise cancelling: ON, AAC) Approx. XXX hours (Noise cancelling: ON, SBC) Approx. XXX hours (Noise cancelling: ON, LDAC) Earphones: 3.7 V, Lithium polymer 55 mAh Charging cradle: 3.7 V, Lithium polymer 450 mAh Approx. XXX hours (AAC) Approx. XXX hours (SBC) Approx. XXX hours (AAC) Approx. XXX hours (SBC) Charging time*2
(25 oC (77 oF)) Earphones: Approx. XXX hours Charging cradle: Approx. XXX hours Earphones with Charging cradle: Approx. XXX hours Charging temperature range 10 oC to 35 oC (50 oF to 95 oF) Operating temperature range 0 oC to 40 oC (32 oF to 104 oF) Operating humidity range 35 %RH to 80 %RH (no condensation) Mass (Weight) Earphone: Approx. XXX g
(XXX oz) (one side only: L and R are the same) Charging cradle:
Approx. XXX g (XXX oz) Earphone: Approx. XXX g
(XXX oz) (one side only: L and R are the same) Charging cradle:
Approx. XXX g (XXX oz) Bluetooth section Supported profiles A2DP, AVRCP, HSP, HFP Charging cradle section Charging terminal USB Type-C Shape Water resistant Water resistant IPX4 equivalent (earphones only)
*1 It may be shorter depending on the operating conditions.
*2 The time required to charge the batteries from empty to full. Specifications are subject to change without notice. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Avant dutiliser lappareil, lire attentivement les instructions qui suivent. Se conformer tout particulirement aux avertissements inscrits sur lappareil et aux consignes de scurit indiques ci-dessous. Conserver le prsent manuel pour consultation ultrieure. 1 Ne pas utiliser cet appareil prs dune source deau. 2 Clean only with dry cloth. 3 Sassurer que le cordon est plac dans un endroit o il ne risque pas dtre cras, pitin ou coinc. Faire particulirement attention ses extrmits de branchement, y compris sa fiche. 4 Dbrancher cet appareil lors dun orage ou en cas de non-utilisation prolonge. Prcautions de scurit CE QUI SUIT NE SAPPLIQUE QUAUX TATS-UNIS ET AU CANADA. Le prsent appareil est conforme la partie 15 des rgles de la FCC et aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.
[EAH-AZ60]
FCC ID: ACJ-EAH-AZ60 Modle: EAH-AZ60 IC: 216A-EAHAZ60
(Pour le Canada uniquement) Le EAH-xxxxx a t test et jug conforme aux limites dexposition aux rayonnements ISDE nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lISDE.
[EAH-AZ40]
FCC ID: ACJ-EAH-AZ40 Modle: EAH-AZ40 IC: 216A-EAHAZ40 CE QUI SUIT NE SAPPLIQUE QUAU CANADA. CAN ICES-3(B)/NMB-3(B) Le numro de srie de ce produit peut tre trouv sous le boitier de charge. Veuillez le noter dans lespace fourni ci-dessous, et conserver le tout pour rfrence future. NUMRO DE MODLE NUMRO DE SRIE Homologation :
DATE DACHAT DTAILLANT ADRESSE DU DTAILLANT N DE TLPHONE Appareil ATTENTION :
Pour rduire les risques dincendie, de choc lectrique ou de dommages lappareil, Ne pas exposer cet appareil la pluie, lhumidit, aux gouttes ou aux claboussures. Use only manufacturers recommended accessories. Ne pas rparer cet appareil par soi-mme. Rfrer la rparation un personnel de service qualifi. viter les conditions suivantes :
Tempratures extrmement basses ou leves durant lutilisation, le stockage ou le transport. Mise au rebut dune batterie dans le feu ou dans un four chaud, ou crasement ou coupure mcanique dune batterie, pouvant entraner une explosion. Temprature extrmement leve et/ou pression de lair extrmement basse pouvant entraner une explosion ou une fuite de liquide ou de gaz inflammable. Do not place this unit near a heat source. Ne pas couter avec cet appareil un volume lev dans les endroits o vous devez entendre des sons provenant du milieu environnant pour la scurit, comme les passages niveau et les chantiers de construction. Tenir cet appareil loign de tout objet susceptible dtre magntis. Certains dispositifs, comme les horloges, peuvent ne pas fonctionner correctement. Noter que cet appareil (couteurs) pourrait chauffer pendant la charge ou immdiatement aprs celle-ci. En fonction de la constitution et de l'tat de sant de la personne qui dsire porter ces couteurs encore chauds et peine retirs du botier, il existe un risque d'effets indsirables comme une rougeur de la peau, des dmangeaisons ou une ruption cutane. Batterie incorpore Ne pas chauffer ni exposer la flamme. Ne pas laisser lappareil pendant un long moment dans une voiture expose directement aux rayons du soleil, avec les portires et les fentres fermes. couteurs/Oreillettes Conserver les couteurs et les oreillettes hors de porte des enfants et des animaux domestiques pour viter quils ne les avalent. Aprs les avoir utiliss, les mettre dans le botier de charge et fermer le couvercle pour les ranger. Fixer solidement les oreillettes. Si elles sont laisses dans les oreilles une fois dtaches, des blessures ou des maladies peuvent survenir. Allergies Arrter lutilisation de lappareil en cas de gne provoque par les couteurs ou toute pice entrant en contact direct avec votre peau. Une utilisation continue peut provoquer des ruptions cutanes ou dautres ractions allergiques. Prcautions dcoute avec les couteurs Une pression sonore excessive provenant dcouteurs ou dun casque audio peut provoquer une perte auditive. Ne pas utiliser vos couteurs un volume lev. Les experts en audition dconseillent lutilisation prolonge sans interruption. Si un bourdonnement se fait entendre, rduire le volume ou arrter dutiliser lappareil. Ne pas utiliser durant la conduite dun vhicule motoris. Cela peut crer un risque daccidents et est illgal dans plusieurs rgions. Il faut faire preuve dune extrme prudence ou cesser temporairement de lutiliser dans des situations Google, Android, Google Play, and other related marks and logos are trademarks of Google LLC. potentiellement dangereuses. Spcifications Gnral Alimentation
(Boitier de charge) Batterie interne Dure de fonctionnement*1
(couteurs) Dure de fonctionnement*1
(couteurs i Boitier de charge) Dure de charge*2
(25 oC (77 oF)) Variation de temprature de charge Variation de temprature dutilisation Variation dhumidit relative dutilisation Masse 5 V c.c., 500 mA couteurs : 3,7 V, Lithium polymre 85 mAh Boitier de charge : 3,7 V, Lithium polymre 650 mAh Environ XXX heures (Rduction de bruit active, AAC) Environ XXX heures (Rduction de bruit active, SBC) Environ XXX heures (Rduction de bruit active, LDAC) Environ XXX heures (Rduction de bruit active, AAC) Environ XXX heures (Rduction de bruit active, SBC) Environ XXX heures (Rduction de bruit active, LDAC) couteurs : 3,7 V, Lithium polymre 55 mAh Boitier de charge : 3,7 V, Lithium polymre 450 mAh Environ XXX heures (AAC) Environ XXX heures (SBC) Environ XXX heures (AAC) Environ XXX heures (SBC) couteurs : Environ XXX heures Boitier de charge : Environ XXX heures couteurs avec boitier de charge : Environ XXX heures 10 oC 35 oC (50 oF 95 oF) 0 oC 40 oC (32 oF 104 oF) 35 % 80 % (pas de condensation) couteur : Environ XXX g
(XXX onces) (un ct seulement :
L et R sont identiques) Boitier de charge :
Environ XXX g (XXX onces) couteur : Environ XXX g
(XXX onces) (un ct seulement :
L et R sont identiques) Boitier de charge :
Environ XXX g (XXX onces) Section Bluetooth Profils compatibles A2DP, AVRCP, HSP, HFP Section botier de charge Bornes de charge Format USB Type-C Rsistance leau Rsistant leau Conforme la norme IPX4 (couteurs uniquement)
*1 EIle peut tre plus courte en fonction des conditions dopration.
*2 Le temps requis pour recharger entirement la batterie. Les caractristiques techniques peuvent tre sujettes des changements sans pravis. La marque et les logos Bluetooth sont des marques dposes appartenant Bluetooth SIG, Inc. et toute utilisation de telles marques par Panasonic Corporation est sous licence. Les autres marques de commerce et dnominations commerciales appartiennent leurs propritaires respectifs. Apple et le logo Apple sont des marques de commerce dApple Inc., enregistres aux tats-Unis et dans dautres pays. App Store est une marque de service dApple Inc. Google, Android, Google Play et les autres marques et logos connexes sont des marques de commerce de Google LLC.
[EAH-AZ60] LDAC et le logo LDAC sont des marques de commerce de Sony Corporation. QR Code est une marque dpose de DENSO WAVE INCORPORATED. Les autres noms de systme et de produits figurant dans ce document sont en gnral les marques dposes ou les marques de commerce des entreprises de dveloppement respectives. Noter que les marques TM et napparaissent pas dans ce document. Ce produit comprend un logiciel libre autre que le logiciel sous licence GPL V2.0 et/ou LGPL V2.1. Les logiciels classs comme ci-dessus sont distribus dans lespoir quils seront utiles, mais SANS AUCUNE GARANTIE, sans mme la garantie implicite de VALEUR MARCHANDE ou DADAPTATION UN USAGE PARTICULIER. Consulter les termes et conditions dtaills de ceux-ci sur la page Web suivante. https://panasonic.jp/support/global/cs/audio/download/index.html Pour mettre le produit au rebut Les batteries intgres sont de prcieuses ressources recyclables. Lors de la mise au rebut de cet appareil, plutt que de le jeter dans les ordures mnagres (dchet non combustible), suivre la rglementation nationale locale et l'apporter dans un point de collecte appropri. En cas de doute, contacter les services gouvernementaux locaux pour connatre le point de collecte le plus proche. Consulter ce document pour avoir des informations sur les caractristiques des batteries.
[EAH-AZ60] LDAC and LDAC logo are trademarks of Sony Corporation. QR Code is a registered trademark of DENSO WAVE INCORPORATED. Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the TM mark and mark do not appear in this document. This product incorporates the open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1. The software categorized as above are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown at the following web page. https://panasonic.jp/support/global/cs/audio/download/index.html When disposing of the product The built-in batteries are a valuable recyclable resource. When disposing of this unit, rather than disposing of in general waste (non-combustible garbage), follow the local national laws and take to the appropriate collection point. Contact your local government organization if you are unsure of your local collection point. Refer to the specifications in this document for information about the batteries. Durant lutilisation, lappareil pourrait recevoir des interfrences provenant de tlphones mobiles. Si des interfrences se produisent, augmenter la distance entre cet appareil et le tlphone mobile. Utiliser uniquement le cordon de charge USB fourni lors de la connexion un ordinateur. Les symboles prsents sur ce produit (y compris sur les accessoires) reprsentent les choses suivantes :
c.c. Conforms to UL STD 62368-1. Certified to CAN/CSA STD C22.2 No.62368-1. Conforme la norme CAN/CSA C22.2 No.62368-1. 4004466 Lea atentamente estas instrucciones de funcionamiento antes de usar la unidad. Siga las instrucciones de seguridad en la unidad y las instrucciones de seguridad aplicables que se mencionan abajo. Guarde a mano estas instrucciones de funcionamiento para consultarlas en el futuro. 1 Limpie solamente con un pao seco. 2 Clean only with dry cloth. 3 Proteja el cable para que no lo pisen o lo doblen particularmente en los enchufes, tomas de corriente y el punto donde sale del aparato. 4 Desenchufe este aparato durante tormentas elctricas o cuando no se usa durante largos perodos de tiempo. Precauciones de seguridad LO QUE SIGUE SE APLICA SOLAMENTE EN LOS ESTADOS UNIDOS Y EL CANAD. Este dispositivo cumple con la seccin 15 de las normas de la FCC y con los estndares de RSS de exencin de licencia del Departamento de Innovacin, Ciencia y Desarrollo Econmico de Canad. Su funcionamiento est sujeto a las dos condiciones siguientes:
(1) este dispositivo no puede producir interferencias y
(2) este dispositivo debe aceptar cualquier interferencia, incluidas las interferencias que puedan dar lugar a un funcionamiento no deseado.
[EAH-AZ60]
FCC ID: ACJ-EAH-AZ60 Modelo: EAH-AZ60 IC: 216A-EAHAZ60 Este transmisor no debe colocarse o hacerse funcionar junto con otra antena o transmisor.
(Solo para los EE. UU.) Este equipo cumple con los lmites establecidos por la FCC de exposicin a radiacin para un entorno no controlado y cumple con las Directrices de exposicin a radiofrecuencia (RF) de la FCC, ya que este equipo emite niveles muy bajos de energa de RF.
[EAH-AZ40]
FCC ID: ACJ-EAH-AZ40 Modelo: EAH-AZ40 IC: 216A-EAHAZ40 LOS SIGUIENTES PUNTOS SOLO SON APLICABLES A LOS EE.UU. Nota FCC:
Los ensayos realizados con este equipo han demostrado que cumple con los lmites para dispositivos digitales de Clase B, conforme a la Parte 15 de las reglas FCC. Estos lmites estn diseados para proporcionar una proteccin razonable contra las interferencias dainas en una instalacin domstica. Este equipo genera, utiliza y puede radiar energa de radiofrecuencia y, si no se instala y utiliza conforme a las instrucciones, puede ocasionar interferencias dainas a las comunicaciones de radio. Sin embargo, no existe garanta alguna de que la interferencia no se produzca en una instalacin determinada. Si este equipo ocasiona interferencias dainas en la recepcin de radio o televisin, lo que puede determinarse apagando y encendiendo el equipo, el usuario deber intentar corregir la interferencia siguiendo alguno de los procedimientos que figuran a continuacin:
Reorientar cambiar de lugar la antena receptora. Incrementar la separacin entre el equipo y el receptor. Conectar el equipo a una toma de un circuito distinto al circuito en el que est conectado el receptor. Consultar con el proveedor o con un tcnico de radio/TV experimentado para obtener ayuda. Advertencia de FCC: Para garantizar el cumplimiento continuado, siga las instrucciones de instalacin adjuntas y use solamente cables de interfaz blindados cuando conecte dispositivos perifricos. Cualquier cambio o modificacin no aprobado expresamente por la parte responsable del cumplimiento puede anular la autoridad del usuario de operar este equipo. Este dispositivo cumple la Parte 15 de las reglas FCC. El funcionamiento est sujeto a las dos siguientes condiciones: (1) este dispositivo no puede producir interferencias y (2) este dispositivo debe aceptar cualquier interferencia, incluyendo aquellas que puedan ocasionar un funcionamiento no deseado del mismo. Declaracin de conformidad del proveedor
[EAH-AZ60]
Nombre comercial: Technics Nmero de modelo: EAH-AZ60 Parte responsable: Panasonic Corporation of North America
[EAH-AZ40]
Nombre comercial: Technics Nmero de modelo: EAH-AZ40 Contacto de asistencia: http://shop.panasonic.com/support Two Riverfront Plaza, Newark, NJ 07102-5490 AVISO:
Para reducir el riesgo de incendio, descarga elctrica o dao del producto, No exponga esta unidad a la lluvia, humedad, goteo ni salpicaduras. Use only manufacturers recommended accessories. No repare este aparato usted mismo. Solicite cualquier reparacin a personal tcnico cualificado. Evite el uso en las siguientes condiciones Temperaturas extremadamente altas o bajas durante el uso, almacenamiento o transporte. Eliminacin de una batera en el fuego o en un horno caliente, o aplastndola o cortndola mecnicamente, lo que podra provocar una explosin. Temperatura extremadamente alta o presin del aire extremadamente baja que pueda provocar una explosin o la fuga de lquido o gas inflamable. Do not place this unit near a heat source. No use este aparato a un volumen alto en lugares en los que necesite escuchar los sonidos del entorno circundante por razones de seguridad, como en cruces de ferrocarril u obras. Mantenga este aparato alejado de cualquier objeto susceptible al magnetismo. Algunos dispositivos, como los relojes, puede que no funcionen correctamente. Batera incorporada No caliente ni exponga las pilas a las llamas. No deje este aparato en un automvil expuesto a la luz solar directa por un perodo prolongado de tiempo con las puertas y ventanas cerradas. Auriculares/Almohadillas Mantenga los auriculares y las almohadillas fuera del alcance de los nios y las mascotas para evitar que los ingieran. Despus de usarlos, pngalos en el soporte cargador y cierre la tapa para guardarlos. Coloque los auriculares firmemente. Si se dejan en las orejas despus de caerse, podran provocar lesiones o nuseas. Alergias Interrumpa el uso si experimenta molestias con los auriculares o cualquier otra parte que est en contacto directo con su piel. El uso continuado podra provocar sarpullidos y otras reacciones alrgicas. Precauciones para la escucha con los audfonos La presin excesiva del sonido de audfonos o auriculares puede causar prdida auditiva. No use los audfonos a un volumen alto. Los expertos en audicin desaconsejan una reproduccin extendida continua. Si experimenta un pitido en los odos, reduzca el volumen o interrumpa el uso. No use los auriculares mientras conduce un vehculo motorizado. Podra suponer un peligro para el trfico y es ilegal en muchos lugares. Debe tener cuidado extremo o interrumpir temporalmente el uso en situaciones potencialmente peligrosas. Los smbolos en este producto (incluidos los accesorios) representan lo siguiente:
CC Declaracin de Conformidad (DoC) Por la presente, Panasonic Corporation declara que este producto es de conformidad con los requisitos sustanciales y con las disposiciones pertinentes de la Directiva 2014/53/UE. Los usuarios pueden descargar una copia de la declaracin de conformidad original (DoC) de los productos RE del servidor DoC:
http://www.ptc.panasonic.eu Contacto con el representante autorizado:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Alemania Tipo de red inalmbrica Banda de frecuencia Potencia mxima
(dBm p.i.r.e) Bluetooth 2402 - 2480 MHz 14 dBm Especificaciones General Fuente de alimentacin
(Soporte cargador) CC 5 V, 500 mA EAH-AZ60 EAH-AZ40 Batera interna Tiempo de funcionamiento*1
(Auriculares) Tiempo de funcionamiento*1
(Auriculares i Soporte cargador) Tiempo de carga*2
(25 oC (77 oF)) Intervalo de temperatura de carga Rango de temperatura de operacin Rango de humedad de operacin Masa (Peso) Auriculares: 3,7 V, Polmero de litio 85 mAh Soporte cargador: 3,7 V, Polmero de litio 650 mAh Auriculares: 3,7 V, Polmero de litio 55 mAh Soporte cargador: 3,7 V, Polmero de litio 450 mAh Aprox. XXX horas (Cancelacin de ruido: ON, AAC) Aprox. XXX horas (Cancelacin de ruido: ON, SBC) Aprox. XXX horas (Cancelacin de ruido: ON, LDAC) Aprox. XXX horas (Cancelacin de ruido: ON, AAC) Aprox. XXX horas (Cancelacin de ruido: ON, SBC) Aprox. XXX horas (Cancelacin de ruido: ON, LDAC) Aprox. XXX horas (AAC) Aprox. XXX horas (SBC) Aprox. XXX horas (AAC) Aprox. XXX horas (SBC) Auriculares: Aprox. XXX horas Soporte cargador: Aprox. XXX horas Auriculares con soporte cargador: Aprox. XXX horas 10 oC hasta 35 oC (50 oF hasta 95 oF) 0 oC hasta 40 oC (32 oF hasta 104 oF) 35 %RH a 80 %RH (sin condensacin) Auricular: Aprox. XXX g (XXX oz)
(solo un lado: L y R son iguales) Soporte cargador:
Aprox. XXX g (XXX oz) Auricular: Aprox. XXX g (XXX oz)
(solo un lado: L y R son iguales) Soporte cargador:
Aprox. XXX g (XXX oz) Archivos admitidos A2DP, AVRCP, HSP, HFP Seccin del soporte cargador Terminal de carga Forma USB tipo C Resistente al agua Resistente al agua Equivalente a IPX4 (solo auriculares)
*1 Puede que sea menor dependiendo de las condiciones de funcionamiento.
*2 El tiempo requerido para cargar las bateras de descargadas a totalmente cargadas. Las especificaciones se encuentran sujetas a cambios sin previo aviso. La marca denominativa Bluetooth y sus logos son marcas comerciales registradas de Bluetooth SIG, Inc. y cualquier uso de dichas marcas por parte de Panasonic Corporation se realiza bajo licencia. Otros nombres de marcas y marcas comerciales son propiedad de sus respectivos propietarios. Apple y el logo de Apple son marcas comerciales de Apple Inc., registradas en los EE. UU. y otros pases. App Store es una marca de servicio de Apple Inc. Google, Android, Google Play otras marcas y logos asociados son marcas comerciales de Google LLC.
[EAH-AZ60] LDAC y el logo LDAC son marcas comerciales de Sony Corporation. QR Code es una marca registrada de DENSO WAVE INCORPORATED. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to:
Panasonic Corporation of North America Consumer Affairs Department 8th Fl. Two Riverfront Plaza Newark NJ 07102-5490 PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Headphones/
Earphones/Headset All included Accessories Parts 1 year Labor Not Applicable 90 days Not Applicable During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product which was not sold as is. Mail-In Service--Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at http://shop.panasonic.com/support When shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. As of December 2019 Limited Warranty
(ONLY FOR CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Certificat de garantie limite
(Pour le Canada seulement) Panasonic Canada Inc. 5770, Ambler Drive, Mississauga (Ontario) L4W 2T3 Technics PRODUCT LIMITED WARRANTY EXCHANGE PROGRAM Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc. Accessories One (1) year This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Technics brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold as is, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.) In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory. CONTACT INFORMATION For product operation and information assistance, please visit our Support page:
www.panasonic.ca/english/support For defective product exchange within the warranty period, please contact the original dealer. PRODUIT Technics GARANTIE LIMITE PROGRAMME DE REMPLACEMENT Panasonic Canada Inc. garantit que ce produit est exempt de dfauts de matriaux et de main-duvre dans un contexte dutilisation normale pendant la priode indique ci-aprs compter de la date dachat original et, dans lventualit dune dfectuosit, accepte, sa discrtion, de (a) rparer le produit avec des pices neuves ou remises neuf, (b) remplacer le produit par un produit neuf ou remis neuf dune valeur quivalente ou
(c) rembourser le prix dachat. La dcision de rparer, remplacer ou rembourser appartient Panasonic Canada Inc. Accessoires Un (1) an La prsente garantie nest fournie qu lacheteur original dun des produits de marque Technics indiqus plus haut, ou la personne layant reu en cadeau, vendu par un dtaillant Panasonic agr au Canada et utilis au Canada. Le produit ne doit pas avoir t vendu tel quel et doit avoir t livr ltat neuf dans son emballage dorigine. POUR TRE ADMISSIBLE AUX SERVICES AU TITRE DE LA PRSENTE GARANTIE, LA PRSENTATION DUN REU DACHAT OU DE TOUTE AUTRE PICE JUSTIFICATIVE DE LA DATE DACHAT ORIGINAL, INDIQUANT LE MONTANT PAY ET LE LIEU DE LACHAT, EST REQUISE. RESTRICTIONS ET EXCLUSIONS La prsente garantie COUVRE SEULEMENT les dfaillances attribuables un dfaut des matriaux ou un vice de fabrication et NE COUVRE PAS lusure normale ni les dommages esthtiques. La prsente garantie NE COUVRE PAS NON PLUS les dommages subis pendant le transport, les dfaillances causes par des produits non fournis par Panasonic Canada Inc., ni celles rsultant dun accident, dun usage abusif ou impropre, de ngligence, dune manutention inadquate, dune mauvaise application, dune altration, dune installation ou de rglages impropres, dun mauvais rglage des contrles de lutilisateur, dun mauvais entretien, dune surtension temporaire, de la foudre, dune modification, de la pntration de sable, de liquides ou dhumidit, dune utilisation commerciale (dans un htel, un bureau, un restaurant ou tout autre usage par affaires ou en location), dune rparation effectue par une entit autre quun centre de service Panasonic agr ou encore dune catastrophe naturelle. Les piles sches sont galement exclues de la prsente garantie. CETTE GARANTIE LIMITE ET EXPRESSE REMPLACE TOUTE AUTRE GARANTIE, EXPRESSE OU IMPLICITE, INCLUANT LES GARANTIES IMPLICITES DU CARACTRE ADQUAT POUR LA COMMERCIALISATION ET UN USAGE PARTICULIER. PANASONIC CANADA INC. NAURA DOBLIGATION EN AUCUNE CIRCONSTANCE POUR TOUT DOMMAGE DIRECT, INDIRECT OU CONSCUTIF RSULTANT DE LUTILISATION DE CE PRODUIT OU DCOULANT DE TOUTE DROGATION UNE GARANTIE EXPRESSE OU IMPLICITE. (
titre dexemples, cette garantie exclut les dommages relatifs une perte de temps, le transport jusqu et depuis un centre de service agr, la perte ou la dtrioration de supports ou dimages, de donnes ou de tout autre contenu en mmoire ou enregistr. Cette liste nest pas exhaustive et nest fournie qu des fins explicatives.) Certaines juridictions ne reconnaissent pas les exclusions ou limitations de dommages indirects ou conscutifs, ou les exclusions de garanties implicites. Dans de tels cas, les limitations stipules ci-dessus peuvent ne pas tre applicables. La prsente garantie vous confre des droits prcis;
vous pourriez aussi avoir dautres droits pouvant varier selon votre province ou territoire de rsidence. DEMANDE DE RENSEIGNEMENTS Pour tout renseignement sur les produits et de lassistance technique, veuillez visiter notre page Soutien :
www.panasonic.ca/french/support Pour le remplacement dun produit dfectueux couvert par la garantie, veuillez communiquer avec le revendeur dorigine. Este producto incorpora software de cdigo abierto distinto del software con licencia GPL V2.0 y/o LGPL V2.1. Dicho software se distribuye esperando que sea til, pero SIN NINGUNA GARANTA, incluso sin la garanta implcita de COMERCIABILIDAD o IDONEIDAD PARA UN FIN DETERMINADO. Consulte los trminos y condiciones detallados del mismo que se muestran en la siguiente pgina web. https://panasonic.jp/support/global/cs/audio/download/index.html Al desprenderse del producto For Australia Las bateras incorporadas son un valioso recurso reciclable. Al desprenderse de este aparato, en lugar de desecharlo en la basura general (basura no combustible), siga la legislacin nacional loca y llvelo al punto de recogida apropiado. Pngase en contacto con su gobierno local si no est seguro de su punto de recogida local. Consulte las especificaciones de este documento para obtener informacin sobre las bateras. Panasonic Australia Pty. Ltd. 1 Innovat ion Road, Macquarie Park NSW 2113 Provides a 12 month parts & labour warranty on this product for manufacturing defects from date of purchase. In addit ion to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also ent itled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. For full details or to claim warranty please contact Panasonic Customer Care on 132 600 or visit www.panasonic.com.au . PRO-031-F10 Issue 2.0 August 2016 Se puede encontrar el nmero de serie de este producto en la parte inferior del soporte cargador. Antelo en el espacio suministrado abajo y gurdelo para futuras referencias. MODELO NMERO DE SERIE Unidad Anotaciones del usuario:
FECHA DE ADQUISICIN NOMBRE DEL CONCESIONARIO Seccin Bluetooth DIRECCIN DEL CONCESIONARIO NMERO DE TELFONO Tenga en cuenta que este aparato (auriculares) podra calentarse durante la carga o inmediatamente despus de la misma. Dependiendo de su constitucin y estado de salud, ponerse los auriculares podra desencadenar reacciones adversas como enrojecimiento de la piel, picor y sarpullido si los auriculares acaban de ser retirados del soporte cargador y todava estn calientes. Otros nombres de sistemas y nombres de productos que aparecen en este documento son en general las marcas comerciales registradas y marcas comerciales de las respectivas compaas desarrolladoras. Tenga en cuenta que la marca TM y la marca no aparecen en este documento.
[EAH-AZ60]
[EAH-AZ40]
1 3 5 4 L R 6 7 8 2 3 4 1 3 5 4 L R 2 3 4 9 7 L R
[EAH-AZ60]
Bluetooth Bluetooth ON EAH-AZ60 English More detailed operating instructions are available in Owners Manual (PDF format). To read it, download it from the website. (l below) Click the desired language. Franais Un mode demploi plus dtaill est disponible dans Manuel dutilisation (format PDF). Pour le lire, le tlcharger depuis le site web. (l ci-dessous) Cliquer sur la langue souhaite. Espaol Puede encontrar instrucciones de funcionamiento ms detalladas en las Instrucciones de funcionamiento (formato PDF). Para leerlas, descrguelas del sitio web. (l debajo) Haga clic en el idioma deseado. https://www.technics.com/support/downloads/oi/EAH-AZ60_AZ40.html Part names Main unit (earphones) 1 Touch sensor (L) (left) 2 Touch sensor (R) (right) 3 Earpieces 4 Earphone LEDs Flashing red:
The charge in the battery is running low. You should charge the unit. 5 Raised dot indicating the L side 1 Charging 2 Pairing 3 Fit the earphones 4 Operating with the Touch sensors To remove/attach the earpieces Restoring to the factory settings Troubleshooting Main unit (charging cradle) 6 Certification information label 7 Terminal section 8 Charging cradle LEDs Lighting green:
The battery is charged fully. Lighting yellow:
The charge in the battery is high. Lighting red:
The charge in the battery is running low. You should charge the unit. Lighting blue:
During charging. 9 Charging terminal The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connecting by pairing (registering) your earphones with a Bluetooth device Using the Technics Audio Connect app (free of charge) makes connecting with 1 Use the USB charging cord (supplied) (b) to connect the charging cradle to a 5.0 V power source (500 mA or higher) (a). The charging cradle LED lights (green, yellow or red) while the charging cradle is charging. 2 Put the earphones into the charging cradle. Inserting the earphones, the charging cradle LED (blue) flashes twice. When no flashing, the earphones are not inserting correctly. 3 Confirm that the charging cradle LED has illuminated (charging starts). Charging time Earphones Charging cradle Earphones with Charging cradle Approx. XXX hours Approx. XXX hours Approx. XXX hours Bluetooth simple. 1 Take both earphones out of the charging cradle. The earphone LEDs will light alternately in blue and red. When pairing with the another device:
Touch and hold the sensor (L or R) for 7 seconds until the LED starts flashing Red/
Blue, indicating that you have entered the pairing mode. 2 Turn on the Bluetooth device and enable the Bluetooth function. 3 From the Bluetooth menu of the Bluetooth device, select device name EAH-AZ60 or EAH-AZ40. 4 Confirm that the earphones and the Bluetooth device are connected. When the earphone LEDs blink twice at approximately 5 second intervals, pairing has been completed and connection has been established. Fit the earphones correctly in order to get adequate noise cancelling effect and acoustics. 1 Check the orientation and L (left) and R (right) of the earphones. 2 Fit firmly the earphones as the illustration. Confirm that the earphones will not fall from your ears after you have fitted them. The left earphone has a raised dot indicating the L side. If the earphones fall out easily, replace with earpieces (supplied) of a different size. Operation Touch once Touch rapidly 2 times Touch rapidly 3 times Touch and hold for about 2 seconds Operation Touch once Touch rapidly 2 times Touch and hold for about 2 seconds Touch sensor (L) Touch sensor (R) 1/;
Volume j Volume i Start the voice assistant 9
Change control of external sounds Touch sensor (L) Touch sensor (R) Receive phone call Mute the voice of the call Reject a phone call End a phone call You can customize the touch sensor operation in the app. If the earphones fall out easily, replace with earpieces (supplied) of a different size. Charge the earphones before restoring the earphones to their factory settings. Remove the earpieces Hold the earpiece with your fingertips and twist slightly to pull it out. Attach the earpieces Make sure the earpieces are fitted firmly into your ears and confirm that they are not at an angle. 1 Take the R side earphone out of the charging cradle. 2 Touch and hold the touch sensor (R) for about 7 seconds. The earphone LED will light alternately in blue and red. 3 Touch and hold the touch sensor (R) for about 10 seconds. The earphone LED (blue) blinks rapidly, and when the power turns off, the earphone returns to the factory settings. 4 Do the same Steps 1 to 3 above for the L side earphone. To re-pair the earphones with a Bluetooth device, delete the registered information
(device name: EAH-AZ60 or EAH-AZ40) on the device, then pair the earphones with the Bluetooth device again. Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. Does not connect with the Bluetooth device. Delete the registration information for this unit from the Bluetooth menu, etc., of the Bluetooth device, then pair again. Cannot charge the unit. Make sure to charge in a room temperature between 10 oC and 35 oC. Is the unit already fully charged? The charging cradle LEDs will turn off immediately if the unit is fully charged. Have the earphones been put into the charging cradle correctly?
If the earphone LEDs do not light even after putting the earphones into the charging cradle, then there is no charge remaining in the charging cradle battery. First charge the charging cradle. Is the USB charging cord connected firmly to the USB terminal of the computer?
h s i l g n E
) a d a n a C
s i a n a r F Part names Main unit (earphones) 1 Touch sensor (L) (left) 2 Touch sensor (R) (right) 3 Earpieces 4 Earphone LEDs Flashing red:
The charge in the battery is running low. You should charge the unit. 5 Raised dot indicating the L side l o a p s E Part names Main unit (earphones) 1 Touch sensor (L) (left) 2 Touch sensor (R) (right) 3 Earpieces 4 Earphone LEDs Flashing red:
The charge in the battery is running low. You should charge the unit. 5 Raised dot indicating the L side 1 Charging 2 Pairing 3 Fit the earphones 4 Operating with the Touch sensors To remove/attach the earpieces Restoring to the factory settings Troubleshooting Main unit (charging cradle) 6 Certification information label 7 Terminal section 8 Charging cradle LED Lighting green:
The battery is charged fully. Lighting yellow:
The charge in the battery is high. Lighting red:
The charge in the battery is running low. You should charge the unit. Lighting blue:
During charging. 9 Charging terminal The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connecting by pairing (registering) your earphones with a Bluetooth device Using the Technics Audio Connect app (free of charge) makes connecting with 1 Use the USB charging cord (supplied) (b) to connect the charging cradle to a 5.0 V power source (500 mA or higher) (a). The charging cradle LED lights (green, yellow or red) while the charging cradle is charging. 2 Put the earphones into the charging cradle. Inserting the earphones, the charging cradle LED (blue) flashes twice. When no flashing, the earphones are not inserting correctly. 3 Confirm that the charging cradle LED has illuminated (charging starts). Charging time Earphones Charging cradle Earphones with Charging cradle Approx. XXX hours Approx. XXX hours Approx. XXX hours Bluetooth simple. 1 Take both earphones out of the charging cradle. The earphone LEDs will light alternately in blue and red. When pairing with the another device:
Touch and hold the sensor (L or R) for 7 seconds until the LED starts flashing Red/
Blue, indicating that you have entered the pairing mode. 2 Turn on the Bluetooth device and enable the Bluetooth function. 3 From the Bluetooth menu of the Bluetooth device, select device name EAH-AZ60 or EAH-AZ40. 4 Confirm that the earphones and the Bluetooth device are connected. When the earphone LEDs blink twice at approximately 5 second intervals, pairing has been completed and connection has been established. Fit the earphones correctly in order to get adequate noise cancelling effect and acoustics. 1 Check the orientation and L (left) and R (right) of the earphones. 2 Fit firmly the earphones as the illustration. Confirm that the earphones will not fall from your ears after you have fitted them. The left earphone has a raised dot indicating the L side. If the earphones fall out easily, replace with earpieces (supplied) of a different size. Operation Touch once Touch rapidly 2 times Touch rapidly 3 times Touch and hold for about 2 seconds Operation Touch oncel Touch rapidly 2 times Touch and hold for about 2 seconds Touch sensor (L) Touch sensor (R) 1/;
Volume j Volume i Start the voice assistant 9
Change control of external sounds Touch sensor (L) Touch sensor (R) Receive phone call Mute the voice of the call Reject a phone call End a phone call You can customize the touch sensor operation in the app. If the earphones fall out easily, replace with earpieces (supplied) of a different size. Charge the earphones before restoring the earphones to their factory settings. Remove the earpieces Hold the earpiece with your fingertips and twist slightly to pull it out. Attach the earpieces Make sure the earpieces are fitted firmly into your ears and confirm that they are not at an angle. 1 Take the R side earphone out of the charging cradle. 2 Touch and hold the touch sensor (R) for about 7 seconds. The earphone LED will light alternately in blue and red. 3 Touch and hold the touch sensor (R) for about 10 seconds. The earphone LED (blue) blinks rapidly, and when the power turns off, the earphone returns to the factory settings. 4 Do the same Steps 1 to 3 above for the L side earphone. To re-pair the earphones with a Bluetooth device, delete the registered information
(device name: EAH-AZ60 or EAH-AZ40) on the device, then pair the earphones with the Bluetooth device again. Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. Does not connect with the Bluetooth device. Delete the registration information for this unit from the Bluetooth menu, etc., of the Bluetooth device, then pair again. Cannot charge the unit. Make sure to charge in a room temperature between 10 oC and 35 oC. Is the unit already fully charged? The charging cradle LEDs will turn off immediately if the unit is fully charged. Have the earphones been put into the charging cradle correctly?
If the earphone LEDs do not light even after putting the earphones into the charging cradle, then there is no charge remaining in the charging cradle battery. First charge the charging cradle. Is the USB charging cord connected firmly to the USB terminal of the computer?
1 Charging 2 Pairing 3 Fit the earphones 4 Operating with the Touch sensors To remove/attach the earpieces Restoring to the factory settings Troubleshooting Main unit (charging cradle) 6 Certification information label 7 Terminal section 8 Charging cradle LEDs Lighting green:
The battery is charged fully. Lighting yellow:
The charge in the battery is high. Lighting red:
The charge in the battery is running low. You should charge the unit. Lighting blue:
During charging. 9 Charging terminal The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connecting by pairing (registering) your earphones with a Bluetooth device Using the Technics Audio Connect app (free of charge) makes connecting with 1 Use the USB charging cord (supplied) (b) to connect the charging cradle to a 5.0 V power source (500 mA or higher) (a). The charging cradle LED lights (green, yellow or red) while the charging cradle is charging. 2 Put the earphones into the charging cradle. Inserting the earphones, the charging cradle LED (blue) flashes twice. When no flashing, the earphones are not inserting correctly. 3 Confirm that the charging cradle LED has illuminated (charging starts). Charging time Earphones Charging cradle Earphones with Charging cradle Approx. XXX hours Approx. XXX hours Approx. XXX hours Bluetooth simple. 1 Take both earphones out of the charging cradle. The earphone LEDs will light alternately in blue and red. When pairing with the another device:
Touch and hold the sensor (L or R) for 7 seconds until the LED starts flashing Red/
Blue, indicating that you have entered the pairing mode. 2 Turn on the Bluetooth device and enable the Bluetooth function. 3 From the Bluetooth menu of the Bluetooth device, select device name EAH-AZ60 or EAH-AZ40. 4 Confirm that the earphones and the Bluetooth device are connected. When the earphone LEDs blink twice at approximately 5 second intervals, pairing has been completed and connection has been established. Fit the earphones correctly in order to get adequate noise cancelling effect and acoustics. 1 Check the orientation and L (left) and R (right) of the earphones. 2 Fit firmly the earphones as the illustration. Confirm that the earphones will not fall from your ears after you have fitted them. The left earphone has a raised dot indicating the L side. If the earphones fall out easily, replace with earpieces (supplied) of a different size. Operation Touch once Touch rapidly 2 times Touch rapidly 3 times Touch and hold for about 2 seconds Operation Touch oncel Touch rapidly 2 times Touch and hold for about 2 seconds Touch sensor (L) Touch sensor (R) 1/;
Volume j Volume i Start the voice assistant 9
Change control of external sounds Touch sensor (L) Touch sensor (R) Receive phone call Mute the voice of the call Reject a phone call End a phone call You can customize the touch sensor operation in the app. If the earphones fall out easily, replace with earpieces (supplied) of a different size. Charge the earphones before restoring the earphones to their factory settings. Remove the earpieces Hold the earpiece with your fingertips and twist slightly to pull it out. Attach the earpieces Make sure the earpieces are fitted firmly into your ears and confirm that they are not at an angle. 1 Take the R side earphone out of the charging cradle. 2 Touch and hold the touch sensor (R) for about 7 seconds. The earphone LED will light alternately in blue and red. 3 Touch and hold the touch sensor (R) for about 10 seconds. The earphone LED (blue) blinks rapidly, and when the power turns off, the earphone returns to the factory settings. 4 Do the same Steps 1 to 3 above for the L side earphone. To re-pair the earphones with a Bluetooth device, delete the registered information
(device name: EAH-AZ60 or EAH-AZ40) on the device, then pair the earphones with the Bluetooth device again. Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. Does not connect with the Bluetooth device. Delete the registration information for this unit from the Bluetooth menu, etc., of the Bluetooth device, then pair again. Cannot charge the unit. Make sure to charge in a room temperature between 10 oC and 35 oC. Is the unit already fully charged? The charging cradle LEDs will turn off immediately if the unit is fully charged. Have the earphones been put into the charging cradle correctly?
If the earphone LEDs do not light even after putting the earphones into the charging cradle, then there is no charge remaining in the charging cradle battery. First charge the charging cradle. Is the USB charging cord connected firmly to the USB terminal of the computer?
English Useful information (Only for Latin American countries) Customer Service Customer Service Directory Obtain products information and operative assistant; localize the closer distributor or Service Center; buy spare parts and accessories by our Web Site to Latin America or calling our Contact Center:
COUNTRY WEB SITE CONTACT CENTER Panama www.panasonic.com/pa/soporte/
800-7262 Colombia www.panasonic.com/co/soporte/
01-8000-947262 Ecuador www.panasonic.com/pa/soporte/
1-800-726276 Costa Rica www.panasonic.com/pa/soporte/
800-7262737 El Salvador www.panasonic.com/pa/soporte/
800-7262 Guatemala www.panasonic.com/pa/soporte/
1-801-811-7262 Uruguay www.panasonic.com/pa/soporte/
0-800-7262 Paraguay www.panasonic.com/pa/soporte/
0-800-11-7262 Chile www.panasonic.com/cl/soporte/
800-390-602 022-797-5000 Peru www.panasonic.com/pe/soporte/
0800-00726 Venezuela www.panasonic.com/pa/soporte/
800-7262-800 Mexico www.panasonic.com/mx/soporte/
Argentina www.panasonic.com/ar/soporte/
01800-847-7262 55-5000-1200 0800-333-7262 0810-321-7262 Dominican Rep. www.panasonic.com/pa/soporte/
809-200-8000 For Caribbean countries that speak English please enter this web site in order to find information of our products and operative assistant:
www.panasonic.com/caribbean Espaol Informacin til (Solo para los pases de Amrica Latina) Atencin al Cliente Directorio de Atencin al cliente Obtenga informacin de productos y asistencia operativa, localice el Centro de Servicio ms cercano y compre repuestos y accesorios a travs de nuestro Sitio Web o llamando a nuestro Contact Center:
PAIS SITIO WEB CONTACT CENTER Panam www.panasonic.com/pa/soporte/
800-7262 Colombia www.panasonic.com/co/soporte/
01-8000-947262 Ecuador www.panasonic.com/pa/soporte/
1-800-726276 Costa Rica www.panasonic.com/pa/soporte/
800-7262737 El Salvador www.panasonic.com/pa/soporte/
800-7262 Guatemala www.panasonic.com/pa/soporte/
1-801-811-7262 Uruguay www.panasonic.com/pa/soporte/
0-800-7262 Paraguay www.panasonic.com/pa/soporte/
0-800-11-7262 Chile www.panasonic.com/cl/soporte/
800-390-602 022-797-5000 Per www.panasonic.com/pe/soporte/
0800-00726 Venezuela www.panasonic.com/pa/soporte/
800-7262-800 Mxico www.panasonic.com/mx/soporte/
Argentina www.panasonic.com/ar/soporte/
01800-847-7262 55-5000-1200 0800-333-7262 0810-321-7262 R. Dominicana www.panasonic.com/pa/soporte/
809-200-8000 Para pases del CARIBE anglosajn, por favor dirigirse a nuestro sitio web para informacin de productos y asistencia operativa:
www.panasonic.com/caribbean Solo para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada.
1 2 | Internal Photos-1 | Internal Photos | 4.52 MiB | April 02 2021 / September 30 2021 | delayed release |
1 2 | Internal Photos-2 | Internal Photos | 4.89 MiB | April 02 2021 / September 30 2021 | delayed release |
1 2 | Internal Photos-3 | Internal Photos | 3.53 MiB | April 02 2021 / September 30 2021 | delayed release |
1 2 | External Photos | External Photos | 5.27 MiB | April 02 2021 / September 30 2021 | delayed release |
1 2 | ID Label/Location Info | ID Label/Location Info | 112.43 KiB | April 02 2021 / April 06 2021 |
AZ40 Model/Modle:EAH-AZ40 FCC ID:ACJ-EAH-AZ40 IC:216A-EAHAZ40 CAN ICES-3(B)/NMB-3(B) European REP:Panasonic Marketing Europe GmbH PTC, Winsbergring 15,22525 Hamburg,Germany Made in Malaysia EAH-AZ40 CCAH20LP2890T1 CMIIT ID:2020DJ4481 Panasonic Corporation Made in Malaysia DC IN 5 V 2.5 W AZ60 FCC ID:ACJ-EAH-AZ60 IC:216A-EAHAZ60 CAN ICES-3(B)/NMB-3(B) Model/Modle:EAH-AZ60 European REP:Panasonic Marketing Europe GmbH PTC, Winsbergring 15,22525 Hamburg,Germany Made in Malaysia EAH-AZ60 CCAH20LP2890T1 CMIIT ID:2020DJ4481 DC IN 5 V Panasonic Corporation 2.5 W Made in Malaysia
1 2 | Declaration of authorization | Cover Letter(s) | 57.05 KiB | April 02 2021 / April 06 2021 |
Ben Botros, Project Manager Safety, Compliance and Quality Assurance Authorization Letter February 24, 2021 PCHP-21-U003 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Original Application for Digital Wireless Stereo Headphones EAH-AZ40 ACJ-EAH-AZ40 Spread Spectrum Transmitter (DSS) FCC Part 15, Subpart C, Section 15.247 2402~ 2480 MHz Type Filing:
Model Numbers:
FCC ID:
FCC Classification:
FCC Rule Part:
Frequency Range:
Responsible Applicant & Grantee:
To whom it may concern;
Please be advised we authorize: Ms. Rose Liu of BTL Inc., No .3 Jinshagang 1st Road, Shixia, Dalang, Dong Guan, China to act on our behalf, for a period of 90 days from the date of this letter and for this single application, submitted to the Federal Communication Commission for equipment authorization in connection with the FCC ID listed above, including Form 731. Any and all acts carried out by Ms. Rose Liu on behalf of Panasonic Corporation of North America, within the scope of the powers granted herein, shall have the same effect as acts of our own. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance Two Riverfront Plaza | Newark, NJ 07102-5490
1 2 | Request for non-disclosure | Cover Letter(s) | 54.81 KiB | April 02 2021 / April 06 2021 |
Ben Botros, Project Manager Safety, Compliance and Quality Assurance Request for Confidentiality February 24, 2021 PCHP-21-U003 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 Type Filing:
Model Numbers:
FCC ID:
Original Application for Digital Wireless Stereo Headphones EAH-AZ40 ACJ-EAH-AZ40 Request For Permanent Confidentiality In accordance with provisions of Sections 0.457(d) and 0.459 of the Commissions Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain:
(1) Operational Description;
(2) Schematic Diagrams; and
(3) Block Diagram. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Request For Short-Term Confidentiality In accordance with FCC Public DA 04-1705, we request 180 days short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain:
(1) External Photographs
(2) Internal Photographs
(3) Test Setup Photographs; and
(4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is introduced into the common marketplace. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance Two Riverfront Plaza | Newark, NJ 07102-5490
1 2 | Test Setup Photos DTS | Test Setup Photos | 1.23 MiB | April 02 2021 / September 30 2021 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-04-06 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2021-04-06
|
||||
1 2 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 |
Newark, NJ
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ACJ
|
||||
1 2 | Equipment Product Code |
EAH-AZ40
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** B********
|
||||
1 2 | Title |
Project Manager
|
||||
1 2 | Telephone Number |
201-3********
|
||||
1 2 | Fax Number |
201-3********
|
||||
1 2 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
S******** L****
|
||||
1 2 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
s******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
R****** L******
|
||||
1 2 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
R******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/30/2021 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Wireless Stereo Earphones | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. This is a portable device. The device must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
S**** H********
|
||||
1 2 | Telephone Number |
+86-7******** Extension:
|
||||
1 2 |
S******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0084000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0083000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC