FCC ID: ACJ-RP-BTS35 Digital Wireless Stereo Earphones

TQBM0175-RP-BTS35_PP_eng.fm 5 Basic Owners Manual Manuel dutilisation Fonctions de base Instrucciones bsicas de funcionamiento Digital Wireless Stereo Earphones couteurs numriques stro sans fil Auriculares estreo inalmbricos digitales Model No. N de modle RP-BTS35 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Nous vous remercions davoir arrt votre choix sur cet appareil. Il est recommand de lire attentivement ce manuel avant dutiliser lappareil et de le conserver pour consultation ultrieure. Le agradecemos haber adquirido este producto. Lea cuidadosamente estas instrucciones antes de usar este producto, y guarde este manual para usarlo en el futuro. PP Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://shop.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.com Panasonic Corporation 2017 Printed in China/Imprim en Chine/Impreso en China Register online at http://shop.panasonic.com/support

(U.S. customers only) If you have any questions, visit:

In the U.S.A.:

http://shop.panasonic.com/support In Canada:

www.panasonic.ca/english/support Pour toute question, visitez :

www.panasonic.ca/french/support English More detailed operating instructions are available in Operating Instructions (PDF format). To read it, download it from the website. http://panasonic.jp/support/global/cs/

accessories/oi/rp_bts35/

Click the desired language. Franais More detailed operating instructions are available in Operating Instructions (PDF format). To read it, download it from the website. http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/

Click the desired language. Espaol More detailed operating instructions are available in Operating Instructions (PDF format). To read it, download it from the website. http://panasonic.jp/support/global/cs/accessories/oi/rp_bts35/

Click the desired language. TQBM0175 F0817HA0 English Accessories Please check and identify the supplied accessories. Only for U.S.A.:

To order accessories, refer to Limited Warranty on the rear page. Only for Canada:

To order accessories, contact the dealer from whom you have made your purchase. 1 x USB charging cord 1 x Earpieces set (L, S) M-size earpieces are attached at the time of purchase. Caution: Use only the supplied USB charging cord when connecting to a computer. Franais Accessories Please check and identify the supplied accessories. Pour commander des accessoires, contacter le revendeur chez qui vous avec ralis votre achat. 1 x USB charging cord 1 x Earpieces set (L, S) M-size earpieces are attached at the time of purchase. Caution: Use only the supplied USB charging cord when connecting to a computer. Espaol Accessories Please check and identify the supplied accessories. 1 x USB charging cord 1 x Earpieces set (L, S) M-size earpieces are attached at the time of purchase. Caution: Use only the supplied USB charging cord when connecting to a computer. English About water resistance IPX4 equivalent Protected against splashing water.

(Securely close the USB lid.) Franais About water resistance IPX4 equivalent Protected against splashing water.

(Securely close the USB lid.) Espaol About water resistance IPX4 equivalent Protected against splashing water.

(Securely close the USB lid.) Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to Customer Services Directory on the rear page if you reside in the U.S.A., or refer to CONTACT INFORMATION on the rear page if you reside in Canada. The unit does not respond. This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the USB charging cord. All the previous operations will be cancelled. (The pairing device information will not be deleted.) Cannot charge the unit. Make sure the computer is turned on and is not on standby or sleep mode. Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports. If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.

)

) B B If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery:

Approximately 300.) LED does not light during charging. / Charging takes longer. Is the USB charging cord (supplied) connected firmly to the USB terminal of the computer? (l Rear page, Make sure to charge in a room temperature between 10 oC and 35 oC. The power does not turn on. Is the unit being charged? The power cannot be turned ON during charging. (l Rear page, The device cannot be connected. Delete the pairing information for this unit from the Bluetooth device, then pair them again. (l Rear page, No sound. Make sure that the unit and the Bluetooth device are connected correctly. (l Rear page, Check if music is playing on the Bluetooth device. Make sure that the unit is turned on and the volume is not set too low. Pair and connect the Bluetooth device and the unit again. (l Rear page, Check if the Bluetooth compatible device supports A2DP profile. For details on profiles, see Listening to music (l Rear page,

). Also refer to the operating manual for the Bluetooth compatible device. Low volume. Increase the volume of the unit. (l Rear page, Increase the volume on the Bluetooth device. Sound from the device is cut off. / Sound quality is bad. Sound may be disrupted if signals are blocked. Do not fully cover this D D D F F

)

)

)

) unit with the palm of your hand, etc. The device may be out of the 10 m communication range. Move the device closer to this unit.

) B Remove any obstacle between this unit and the device. Switch off any wireless LAN device when not in use. A communication problem may arise if the battery is not fully charged. Charge the unit. (l Rear page, You cannot hear the other person. Make sure that the unit and the Bluetooth enabled phone are turned on. Check if the unit and the Bluetooth enabled phone are connected.

(l Rear page, Check the audio settings of the Bluetooth enabled phone. Switch the calling device to the unit if it is set to the Bluetooth enabled phone.

(l Rear page, If the volume of the other persons voice is too low, increase the volume of both the unit and the Bluetooth enabled phone. Cannot make a phone call. Check if the Bluetooth compatible device supports HSP or HFP profile. For details on profiles, see Listening to music (l Rear page, F

). Also refer to the operating manual for the Bluetooth enabled phone.

) and Making a phone call (l Rear page, D D F

)

) The serial number of this product can be found on the tag. Please note them in the space provided below and keep for future reference. MODEL NUMBER RP-BTS35 SERIAL NUMBER User memo:

DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER English Safety precautions For the U.S.A. and Canada only A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA. This device complies with Part 15 of FCC Rules and Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of this device. FCC ID: ACJ-RP-BTS35 Model: RP-BTS35 IC: 216A-RPBTS35 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption ratio

(SAR). THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support FCC CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Unit WARNING:

To reduce the risk of fire, electric shock or product damage, Do not let water or other liquids drip or splash inside the unit. Do not expose accessories (USB charging cord) to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on accessories. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid using or placing this unit near sources of heat. Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. Earpieces Keep the earpieces out of reach of children to prevent swallowing. Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused. Allergies Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions. Maintenance Clean this unit with a dry and soft cloth. Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off. Specifications General Power supply DC 5 V, 500 mA

(Internal battery: 3.7 V

(Li-polymer 90 mAh)) Approx. 6 hours Operating time*1 Charging time*2 (25 oC (77 oF)) Approx. 1.5 hours Charging temperature range Operating temperature range Operating humidity range 10 oC to 35 oC (50 oF to 95 oF) 0 oC to 40 oC (32 oF to 104 oF) 35%RH to 80%RH

(no condensation) Approx. 20 g (0.7 oz) IPX4 equivalent Mass (Weight) Water resistant Water resistant Bluetooth section Frequency band Supported profiles Supported codec

*1 It may be shorter depending on the operating conditions.

*2 Time taken to recharge from empty to full. 2402 MHz to 2480 MHz A2DP, AVRCP, HSP, HFP SBC Franais Prcautions de scurit Uniquement pour les tats-Unis et le Canada Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. CE QUI SUIT NE SAPPLIQUE QUAUX ATS-UNIS ET AU CANADA. Le prsent appareil est conforme la partie 15 des rgles de la FCC et aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC ID: ACJ-RP-BTS35 Modle: RP-BTS35 IC: 216A-RPBTS35 Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition radiolectriques (RF) de la FCC et les lignes directrices dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement met une nergie RF trs faible qui est considre conforme sans valuation du dbit dabsorption spcifique (DAS). Unit WARNING:

To reduce the risk of fire, electric shock or product damage, Do not let water or other liquids drip or splash inside the unit. Do not expose accessories (USB charging cord) to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on accessories. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid using or placing this unit near sources of heat. Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. Earpieces Keep the earpieces out of reach of children to prevent swallowing. Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused. Allergies Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions. Maintenance Clean this unit with a dry and soft cloth. Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off. Specifications General Power supply DC 5 V, 500 mA

(Internal battery: 3.7 V

(Li-polymer 90 mAh)) Approx. 6 hours Operating time*1 Charging time*2 (25 oC (77 oF)) Approx. 1.5 hours Charging temperature range Operating temperature range Operating humidity range 10 oC to 35 oC (50 oF to 95 oF) 0 oC to 40 oC (32 oF to 104 oF) 35%RH to 80%RH

(no condensation) Approx. 20 g (0.7 oz) IPX4 equivalent Mass (Weight) Water resistant Water resistant Bluetooth section Frequency band Supported profiles Supported codec

*1 It may be shorter depending on the operating conditions.

*2 Time taken to recharge from empty to full. 2402 MHz to 2480 MHz A2DP, AVRCP, HSP, HFP SBC Troubleshooting Precauciones de seguridad Troubleshooting Espaol Avant dappeler un centre de service, faire les vrifications dcrites ci-dessous. En cas de doute sur certains des points de vrification, ou si les solutions proposes ne rsolvent pas le problme rencontr, se reporter la section DEMANDE DE RENSEIGNEMENTS la page arrire. The unit does not respond. This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the USB charging cord. All the previous operations will be cancelled. (The pairing device information will not be deleted.) Cannot charge the unit. Make sure the computer is turned on and is not on standby or sleep mode. Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports. If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.

)

) B B If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery:

Approximately 300.) LED does not light during charging. / Charging takes longer. Is the USB charging cord (supplied) connected firmly to the USB terminal of the computer? (l Rear page, Make sure to charge in a room temperature between 10 oC and 35 oC. The power does not turn on. Is the unit being charged? The power cannot be turned ON during charging. (l Rear page, The device cannot be connected. Delete the pairing information for this unit from the Bluetooth device, then pair them again. (l Rear page, No sound. Make sure that the unit and the Bluetooth device are connected correctly. (l Rear page, Check if music is playing on the Bluetooth device. Make sure that the unit is turned on and the volume is not set too low. Pair and connect the Bluetooth device and the unit again. (l Rear page, Check if the Bluetooth compatible device supports A2DP profile. For details on profiles, see Listening to music (l Rear page,

). Also refer to the operating manual for the Bluetooth compatible device. Low volume. Increase the volume of the unit. (l Rear page, Increase the volume on the Bluetooth device. Sound from the device is cut off. / Sound quality is bad. Sound may be disrupted if signals are blocked. Do not fully cover this D D D F F

)

)

)

) unit with the palm of your hand, etc. The device may be out of the 10 m communication range. Move the device closer to this unit.

) B Remove any obstacle between this unit and the device. Switch off any wireless LAN device when not in use. A communication problem may arise if the battery is not fully charged. Charge the unit. (l Rear page, You cannot hear the other person. Make sure that the unit and the Bluetooth enabled phone are turned on. Check if the unit and the Bluetooth enabled phone are connected.

(l Rear page, Check the audio settings of the Bluetooth enabled phone. Switch the calling device to the unit if it is set to the Bluetooth enabled phone.

(l Rear page, If the volume of the other persons voice is too low, increase the volume of both the unit and the Bluetooth enabled phone. Cannot make a phone call. Check if the Bluetooth compatible device supports HSP or HFP profile. For details on profiles, see Listening to music (l Rear page, F

). Also refer to the operating manual for the Bluetooth enabled phone.

) and Making a phone call (l Rear page, D D F

)

) The serial number of this product can be found on the tag. Veuillez le noter dans lespace fourni ci-dessous, et conserver le tout pour rfrence future. NUMRO DE MODLE RP-BTS35 NUMRO DE SRIE Homologation:

DATE DACHAT DTAILLANT ADRESSE DU DTAILLANT N DE TLPHONE LO QUE SIGUE SE APLICA SOLAMENTE EN LOS ESTADOS UNIDOS Y EL CANAD. Este dispositivo cumple con la(s) norma(s) para dispositivos exentos de licencia RSS de Industry Canada. El funcionamiento est sujeto a las dos siguientes condiciones:

(1) este dispositivo no puede producir interferencias y

(2) este dispositivo debe aceptar cualquier interferencia, incluyendo aquellas que puedan ocasionar un funcionamiento no deseado del mismo. ID FCC: ACJ-RP-BTS35 Modelo: RP-BTS35 IC: 216A-RPBTS35 Este transmisor no debe colocarse o hacerse funcionar junto con otra antena o transmisor Este dispositivo cumple los lmites de exposicin a la radiacin de la FCC/IC establecidos para un entorno no controlado, as como las directrices de exposicin a radio frecuencia (RF) de la FCC y la RSS-102 de las reglas de exposicin a radio frecuencia (RF) de la IC. Este equipo presenta niveles muy bajos de energa RF que se estima cumplen sin necesidad de comprobar la relacin especfica de absorcin (SAR). LOS SIGUIENTES PUNTOS SOLO SON APLICABLES A LOS EE.UU. Nota FCC:

Los ensayos realizados con este equipo han demostrado que cumple con los lmites para dispositivos digitales de Clase B, conforme a la Parte 15 de las reglas FCC. Estos lmites estn diseados para proporcionar una proteccin razonable contra las interferencias dainas en una instalacin domstica. Este equipo genera, utiliza y puede radiar energa de radiofrecuencia y, si no se instala y utiliza conforme a las instrucciones, puede ocasionar interferencias dainas a las comunicaciones de radio. Sin embargo, no existe garanta alguna de que la interferencia no se produzca en una instalacin determinada. Si este equipo ocasiona interferencias dainas en la recepcin de radio o televisin, lo que puede determinarse apagando y encendiendo el equipo, el usuario deber intentar corregir la interferencia siguiendo alguno de los procedimientos que figuran a continuacin:

Reorientar cambiar de lugar la antena receptora. Incrementar la separacin entre el equipo y el receptor. Conectar el equipo a una toma de un circuito distinto al circuito en el que est conectado el receptor. Consultar con el proveedor o con un tcnico de radio/TV experimentado para obtener ayuda. Cualquier cambio o modificacin no autorizados que se realicen en el equipo anular la capacidad del usuario para hacer funcionar este dispositivo. Este dispositivo cumple la Parte 15 de las reglas FCC. El funcionamiento est sujeto a las dos siguientes condiciones: (1) este dispositivo no puede producir interferencias y (2) este dispositivo debe aceptar cualquier interferencia, incluyendo aquellas que puedan ocasionar un funcionamiento no deseado del mismo. Parte responsable: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Contacto de asistencia: http://shop.panasonic.com/support PRECAUCIN FCC:

Cualquier cambio o modificacin no autorizados que se realicen en el equipo anular la capacidad del usuario para hacer funcionar este dispositivo. Unit WARNING:

To reduce the risk of fire, electric shock or product damage, Do not let water or other liquids drip or splash inside the unit. Do not expose accessories (USB charging cord) to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on accessories. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid using or placing this unit near sources of heat. Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. Earpieces Keep the earpieces out of reach of children to prevent swallowing. Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused. Allergies Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions. Maintenance Clean this unit with a dry and soft cloth. Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off. Specifications General Power supply DC 5 V, 500 mA

(Internal battery: 3.7 V

(Li-polymer 90 mAh)) Approx. 6 hours Operating time*1 Charging time*2 (25 oC (77 oF)) Approx. 1.5 hours Charging temperature range Operating temperature range Operating humidity range 10 oC to 35 oC (50 oF to 95 oF) 0 oC to 40 oC (32 oF to 104 oF) 35%RH to 80%RH

(no condensation) Approx. 20 g (0.7 oz) IPX4 equivalent Mass (Weight) Water resistant Water resistant Bluetooth section Frequency band Supported profiles Supported codec

*1 It may be shorter depending on the operating conditions.

*2 Time taken to recharge from empty to full. 2402 MHz to 2480 MHz A2DP, AVRCP, HSP, HFP SBC Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. The unit does not respond. This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the USB charging cord. All the previous operations will be cancelled. (The pairing device information will not be deleted.) Cannot charge the unit. Make sure the computer is turned on and is not on standby or sleep mode. Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports. If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again.

)

) B B If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery:

Approximately 300.) LED does not light during charging. / Charging takes longer. Is the USB charging cord (supplied) connected firmly to the USB terminal of the computer? (l Rear page, Make sure to charge in a room temperature between 10 oC and 35 oC. The power does not turn on. Is the unit being charged? The power cannot be turned ON during charging. (l Rear page, The device cannot be connected. Delete the pairing information for this unit from the Bluetooth device, then pair them again. (l Rear page, No sound. Make sure that the unit and the Bluetooth device are connected correctly. (l Rear page, Check if music is playing on the Bluetooth device. Make sure that the unit is turned on and the volume is not set too low. Pair and connect the Bluetooth device and the unit again. (l Rear page, Check if the Bluetooth compatible device supports A2DP profile. For details on profiles, see Listening to music (l Rear page,

). Also refer to the operating manual for the Bluetooth compatible device. Low volume. Increase the volume of the unit. (l Rear page, Increase the volume on the Bluetooth device. Sound from the device is cut off. / Sound quality is bad. Sound may be disrupted if signals are blocked. Do not fully cover this D D D F F

)

)

)

) unit with the palm of your hand, etc. The device may be out of the 10 m communication range. Move the device closer to this unit.

) B Remove any obstacle between this unit and the device. Switch off any wireless LAN device when not in use. A communication problem may arise if the battery is not fully charged. Charge the unit. (l Rear page, You cannot hear the other person. Make sure that the unit and the Bluetooth enabled phone are turned on. Check if the unit and the Bluetooth enabled phone are connected.

(l Rear page, Check the audio settings of the Bluetooth enabled phone. Switch the calling device to the unit if it is set to the Bluetooth enabled phone.

(l Rear page, If the volume of the other persons voice is too low, increase the volume of both the unit and the Bluetooth enabled phone. Cannot make a phone call. Check if the Bluetooth compatible device supports HSP or HFP profile. For details on profiles, see Listening to music (l Rear page, F

). Also refer to the operating manual for the Bluetooth enabled phone.

) and Making a phone call (l Rear page, D D F

)

) The serial number of this product can be found on the tag. Antelo en el espacio suministrado abajo y gurdelo para futuras referencias. MODELO RP-BTS35 NMERO DE SERIE Anotaciones del usuario:

FECHA DE ADQUISICIN NOMBRE DEL CONCESIONARIO DIRECCIN DEL CONCESIONARIO NMERO DE TELFONO Informacin til

(Solo para los pases de Amrica Latina) SITIO WEB Atencin al Cliente Directorio de Atencin al cliente Obtenga informacin de productos y asistencia operativa, localice el Centro de Servicio ms cercano y compre repuestos y accesorios a travs de nuestro Sitio Web o llamando a nuestro Contact Center:

PAIS Panam Colombia Ecuador Costa Rica El Salvador Guatemala Uruguay Paraguay Chile www.panasonic.com/pa/soporte/

www.panasonic.com/co/soporte/

www.panasonic.com/ec/soporte/

www.panasonic.com/cr/soporte/

www.panasonic.com/sv/soporte/

www.panasonic.com/gt/soporte/

www.panasonic.com/uy/soporte/

www.panasonic.com/uy/soporte/

www.panasonic.com/cl/soporte/

CONTACT CENTER 800-7262 01-8000-947262 1-800-726276 800-7262737 800-7262 1-801-811-7262 0-800-7262 0-800-11-7262 800-390-602 022-797-5000 0800-00726 800-7262-800 www.panasonic.com/pe/soporte/

www.panasonic.com/ve/soporte/

www.panasonic.com/mx/soporte/ 01800-847-7262 Per Venezuela Mxico Argentina www.panasonic.com/ar/soporte/

R. Dominicana www.panasonic.com/do/soporte/

55-5000-1200 0800-333-7262 0810-321-7262 809-200-8000 TQBM0175-RP-BTS35_PP_eng.fm 6 A English A Part names a Right earphone b Remote controller C Raised dot indicating the left side 1 Clip 2 USB lid 3 Cord adjuster 4 Left earphone 5 Earpiece 6 Microphone 7 LED indicator light*

8 Charging terminal (DC IN) 9 [+] button : [

* Hereafter referred to as LED

] button ; [] button B Charging Franais A Part names a Right earphone b Remote controller C Raised dot indicating the left side 1 Clip 2 USB lid 3 Cord adjuster 4 Left earphone 5 Earpiece 6 Microphone 7 LED indicator light*

8 Charging terminal (DC IN) 9 [+] button : [

* Hereafter referred to as LED

] button ; [] button B Charging Espaol A Part names a Right earphone b Remote controller C Raised dot indicating the left side 1 Clip 2 USB lid 3 Cord adjuster 4 Left earphone 5 Earpiece 6 Microphone 7 LED indicator light*

8 Charging terminal (DC IN) 9 [+] button : [

* Hereafter referred to as LED

] button ; [] button B Charging Bluetooth Bluetooth ON RP-BTS35 B C D E L S M F G 1

[+]

[

]

[]

3 2 4 The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connect this unit to a computer (c) using the USB charging cord (supplied) (b). Within approximately 3 seconds after the connection is established, the LED on the right earphone will light in red. The LED (a) lights in red when charging is in progress. When charging is completed, the LED will go out. Charging will take approximately 1.5 hours from empty state to fully charged.

(Quick charging time for 70 minutes operation: Approx. 15 minutes) The power cannot be turned on while charging. Do not use any other USB charging cords except the supplied one. When the battery level is low during use of the unit, the blue blinking LED will change to red. A beep will sound every 1 minute. When the battery runs out, the power will turn off. C Turning the power on/off The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connect this unit to a computer (c) using the USB charging cord (supplied) (b). Within approximately 3 seconds after the connection is established, the LED on the right earphone will light in red. The LED (a) lights in red when charging is in progress. When charging is completed, the LED will go out. Charging will take approximately 1.5 hours from empty state to fully charged.

(Quick charging time for 70 minutes operation: Approx. 15 minutes) The power cannot be turned on while charging. Do not use any other USB charging cords except the supplied one. When the battery level is low during use of the unit, the blue blinking LED will change to red. A beep will sound every 1 minute. When the battery runs out, the power will turn off. C Turning the power on/off The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connect this unit to a computer (c) using the USB charging cord (supplied) (b). Within approximately 3 seconds after the connection is established, the LED on the right earphone will light in red. The LED (a) lights in red when charging is in progress. When charging is completed, the LED will go out. Charging will take approximately 1.5 hours from empty state to fully charged.

(Quick charging time for 70 minutes operation: Approx. 15 minutes) The power cannot be turned on while charging. Do not use any other USB charging cords except the supplied one. When the battery level is low during use of the unit, the blue blinking LED will change to red. A beep will sound every 1 minute. When the battery runs out, the power will turn off. C Turning the power on/off

] for approximately 3 seconds. A beep will

] (b) of this unit for approx. 3 seconds Press and hold [

until the LED (blue) (a) blinks. A beep will sound, and the LED (blue) will blink slowly. To turn the power off Press and hold [

sound and the power will be turned off. If the unit is not connected to a Bluetooth device, the unit will beep and turn off automatically approximately 5 minutes after you have stopped using it. (Auto power off) D Connecting a Bluetooth device Bluetooth pairing 1 In the power-off state, press and hold [

] of this unit until 2 Select RP-BTS35 (a) from the Bluetooth devices menu. If prompted for a passkey, input the passkey 0000 (four zeros) of this unit. When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) the LED blinks in blue and red alternately. Connecting a paired Bluetooth device 1 Turn on this unit. 2 Perform steps 2 of Bluetooth pairing. (l above) When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) E F How to wear the earphones Using the earphones

] for approximately 3 seconds. A beep will

] (b) of this unit for approx. 3 seconds Press and hold [

until the LED (blue) (a) blinks. A beep will sound, and the LED (blue) will blink slowly. To turn the power off Press and hold [

sound and the power will be turned off. If the unit is not connected to a Bluetooth device, the unit will beep and turn off automatically approximately 5 minutes after you have stopped using it. (Auto power off) D Connecting a Bluetooth device Bluetooth pairing 1 In the power-off state, press and hold [

] of this unit until 2 Select RP-BTS35 (a) from the Bluetooth devices menu. If prompted for a passkey, input the passkey 0000 (four zeros) of this unit. When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) the LED blinks in blue and red alternately. Connecting a paired Bluetooth device 1 Turn on this unit. 2 Perform steps 2 of Bluetooth pairing. (l above) When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) E F How to wear the earphones Using the earphones

] for approximately 3 seconds. A beep will

] (b) of this unit for approx. 3 seconds Press and hold [

until the LED (blue) (a) blinks. A beep will sound, and the LED (blue) will blink slowly. To turn the power off Press and hold [

sound and the power will be turned off. If the unit is not connected to a Bluetooth device, the unit will beep and turn off automatically approximately 5 minutes after you have stopped using it. (Auto power off) D Connecting a Bluetooth device Bluetooth pairing 1 In the power-off state, press and hold [

] of this unit until 2 Select RP-BTS35 (a) from the Bluetooth devices menu. If prompted for a passkey, input the passkey 0000 (four zeros) of this unit. When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) the LED blinks in blue and red alternately. Connecting a paired Bluetooth device 1 Turn on this unit. 2 Perform steps 2 of Bluetooth pairing. (l above) When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) E F How to wear the earphones Using the earphones Connect the Bluetooth device and the unit. Listening to music Select and play the music on the Bluetooth device. The selected music is output to the earphones of the unit. Remote controlling (Available only if your Bluetooth device supports AVRCP) Press [

]. Press [+]. Press []. Press and hold [+] for approximately 2 seconds. Press and hold [] for approximately 2 seconds.

(Operation example) Play / Pause:

Increase the volume:

Decrease the volume:

Forward to the start of next track:

Return to the start of current track:

Making a phone call 1 Press [

2 Start talking. 3 Press [

(HFP only) Reject a call / Change the call device: Press [

twice quickly. You can have a phone conversation using the microphone of the unit by making a call from the Bluetooth enabled phone. Restoring to the factory settings 1 While the unit is turned off, press and hold [

] for at least 5 seconds until the LED starts blinking alternately in blue and red.

] on the unit and answer the incoming call.

] to end the phone call.

]

Connect the Bluetooth device and the unit. Listening to music Select and play the music on the Bluetooth device. The selected music is output to the earphones of the unit. Remote controlling (Available only if your Bluetooth device supports AVRCP) Press [

]. Press [+]. Press []. Press and hold [+] for approximately 2 seconds. Press and hold [] for approximately 2 seconds.

(Operation example) Play / Pause:

Increase the volume:

Decrease the volume:

Forward to the start of next track:

Return to the start of current track:

Making a phone call 1 Press [

2 Start talking. 3 Press [

(HFP only) Reject a call / Change the call device: Press [

twice quickly. You can have a phone conversation using the microphone of the unit by making a call from the Bluetooth enabled phone. Restoring to the factory settings 1 While the unit is turned off, press and hold [

] for at least 5 seconds until the LED starts blinking alternately in blue and red.

] on the unit and answer the incoming call.

] to end the phone call.

]

Connect the Bluetooth device and the unit. Listening to music Select and play the music on the Bluetooth device. The selected music is output to the earphones of the unit. Remote controlling (Available only if your Bluetooth device supports AVRCP) Press [

]. Press [+]. Press []. Press and hold [+] for approximately 2 seconds. Press and hold [] for approximately 2 seconds.

(Operation example) Play / Pause:

Increase the volume:

Decrease the volume:

Forward to the start of next track:

Return to the start of current track:

Making a phone call 1 Press [

2 Start talking. 3 Press [

(HFP only) Reject a call / Change the call device: Press [

twice quickly. You can have a phone conversation using the microphone of the unit by making a call from the Bluetooth enabled phone. Restoring to the factory settings 1 While the unit is turned off, press and hold [

] for at least 5 seconds until the LED starts blinking alternately in blue and red.

] on the unit and answer the incoming call.

] to end the phone call.

]

2 While the LED is blinking alternately in blue and red, press and hold [+] and [] at the same time for at least 5 seconds. The default settings will be restored after the LED (blue) blinks fast and the unit turns off. G To remove the battery when disposing of this unit 2 While the LED is blinking alternately in blue and red, press and hold [+] and [] at the same time for at least 5 seconds. The default settings will be restored after the LED (blue) blinks fast and the unit turns off. G To remove the battery when disposing of this unit 2 While the LED is blinking alternately in blue and red, press and hold [+] and [] at the same time for at least 5 seconds. The default settings will be restored after the LED (blue) blinks fast and the unit turns off. G To remove the battery when disposing of this unit The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. When disposing of this unit, take out the battery installed in this unit and recycle it. Danger As the rechargeable battery is specifically for this product, do not use it for any other device. Do not charge the removed battery. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. When disposing of this unit, take out the battery installed in this unit and recycle it. Danger As the rechargeable battery is specifically for this product, do not use it for any other device. Do not charge the removed battery. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. When disposing of this unit, take out the battery installed in this unit and recycle it. Danger As the rechargeable battery is specifically for this product, do not use it for any other device. Do not charge the removed battery. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Do not pierce the battery with a nail, subject it to an impact, or dismantle Do not pierce the battery with a nail, subject it to an impact, or dismantle Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it. or modify it. or modify it. Do not let the wires touch any other metal or each other. Do not carry or store the battery with a necklace, hair pin, or the like. Doing so may cause the battery to generate heat, ignite, or rupture. Warning Do not place the removed battery, and other items within reach of infants. Accidental swallowing of such an item may have an adverse effect on the body. In the event that you think such an item has been swallowed, consult a doctor immediately. In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare hands. Fluid entering into an eye may cause loss of eyesight. Wash the eye with water immediately without rubbing it, and then consult Do not let the wires touch any other metal or each other. Do not carry or store the battery with a necklace, hair pin, or the like. Doing so may cause the battery to generate heat, ignite, or rupture. Warning Do not place the removed battery, and other items within reach of infants. Accidental swallowing of such an item may have an adverse effect on the body. In the event that you think such an item has been swallowed, consult a doctor immediately. In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare hands. Fluid entering into an eye may cause loss of eyesight. Wash the eye with water immediately without rubbing it, and then consult Do not let the wires touch any other metal or each other. Do not carry or store the battery with a necklace, hair pin, or the like. Doing so may cause the battery to generate heat, ignite, or rupture. Warning Do not place the removed battery, and other items within reach of infants. Accidental swallowing of such an item may have an adverse effect on the body. In the event that you think such an item has been swallowed, consult a doctor immediately. In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare hands. Fluid entering into an eye may cause loss of eyesight. Wash the eye with water immediately without rubbing it, and then consult a doctor. a doctor. a doctor. Fluid getting on your body or clothes may cause inflammation of the skin or injury. Sufficiently rinse with clean water, and then consult a doctor. A lithium-ion polymer rechargeable battery is built in to the left earphone. Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure, and remove the internal rechargeable battery. Disassemble after the battery runs out. When disposing of the battery, please contact your local authorities or dealer and ask for the correct method of disposal. 1 Hold the top of the left earphone (L), and put a straight-slot screwdriver (commercially available) under the upper cover a. Make sure to keep fingers away from the tip of the screwdriver. Select a screwdriver to be large enough for a space under the upper Fluid getting on your body or clothes may cause inflammation of the skin or injury. Sufficiently rinse with clean water, and then consult a doctor. A lithium-ion polymer rechargeable battery is built in to the left earphone. Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure, and remove the internal rechargeable battery. Disassemble after the battery runs out. When disposing of the battery, please contact your local authorities or dealer and ask for the correct method of disposal. 1 Hold the top of the left earphone (L), and put a straight-slot screwdriver (commercially available) under the upper cover a. Make sure to keep fingers away from the tip of the screwdriver. Select a screwdriver to be large enough for a space under the upper Fluid getting on your body or clothes may cause inflammation of the skin or injury. Sufficiently rinse with clean water, and then consult a doctor. A lithium-ion polymer rechargeable battery is built in to the left earphone. Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure, and remove the internal rechargeable battery. Disassemble after the battery runs out. When disposing of the battery, please contact your local authorities or dealer and ask for the correct method of disposal. 1 Hold the top of the left earphone (L), and put a straight-slot screwdriver (commercially available) under the upper cover a. Make sure to keep fingers away from the tip of the screwdriver. Select a screwdriver to be large enough for a space under the upper 2 Use the screwdriver for leverage, and push the upper cover a upward. Be careful not to touch the battery with the screwdriver. 3 Hold the battery b, and remove it. 4 Pull off the battery b and separate it from the left earphone by cutting off the wires, one by one, with scissors. Insulate the wire parts of the removed battery with cellophane tape. Do not damage or dismantle the battery. 2 Use the screwdriver for leverage, and push the upper cover a upward. Be careful not to touch the battery with the screwdriver. 3 Hold the battery b, and remove it. 4 Pull off the battery b and separate it from the left earphone by cutting off the wires, one by one, with scissors. Insulate the wire parts of the removed battery with cellophane tape. Do not damage or dismantle the battery. 2 Use the screwdriver for leverage, and push the upper cover a upward. Be careful not to touch the battery with the screwdriver. 3 Hold the battery b, and remove it. 4 Pull off the battery b and separate it from the left earphone by cutting off the wires, one by one, with scissors. Insulate the wire parts of the removed battery with cellophane tape. Do not damage or dismantle the battery. cover. cover. cover. English Close the charging terminal cover securely. Do not touch the charging terminal with wet hand. If sweat or liquid is attached to the charging terminal, malfunction may occur. Franais Close the charging terminal cover securely. Do not touch the charging terminal with wet hand. If sweat or liquid is attached to the charging terminal, malfunction may occur. Espaol Close the charging terminal cover securely. Do not touch the charging terminal with wet hand. If sweat or liquid is attached to the charging terminal, malfunction may occur. English The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the TM mark and mark do not appear in this document. Franais The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the TM mark and mark do not appear in this document. Espaol The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the TM mark and mark do not appear in this document. Limited Warranty

(ONLY FOR CANADA) Certificat de garantie limite

(Pour le Canada seulement) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT LIMITED WARRANTY EXCHANGE PROGRAM Panasonic Canada Inc. 5770, Ambler Drive, Mississauga (Ontario) L4W 2T3 PRODUIT PANASONIC GARANTIE LIMITE PROGRAMME DE REMPLACEMENT Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc. Accessories One (1) year This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold as is, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.) In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory. CONTACT INFORMATION For product operation and information assistance, please visit our Support page:

www.panasonic.ca/english/support For defective product exchange within the warranty period, please contact the original dealer. Panasonic Canada Inc. garantit que ce produit est exempt de dfauts de matriaux et de main-duvre dans un contexte dutilisation normale pendant la priode indique ci-aprs compter de la date dachat original et, dans lventualit dune dfectuosit, accepte, sa discrtion, de (a) rparer le produit avec des pices neuves ou remises neuf, (b) remplacer le produit par un produit neuf ou remis neuf dune valeur quivalente ou (c) rembourser le prix dachat. La dcision de rparer, remplacer ou rembourser appartient Panasonic Canada Inc. Accessoires Un (1) an La prsente garantie nest fournie qu lacheteur original dun des produits de marque Panasonic indiqus plus haut, ou la personne layant reu en cadeau, vendu par un dtaillant Panasonic agr au Canada et utilis au Canada. Le produit ne doit pas avoir t vendu tel quel et doit avoir t livr ltat neuf dans son emballage dorigine. POUR TRE ADMISSIBLE AUX SERVICES AU TITRE DE LA PRSENTE GARANTIE, LA PRSENTATION DUN REU DACHAT OU DE TOUTE AUTRE PICE JUSTIFICATIVE DE LA DATE DACHAT ORIGINAL, INDIQUANT LE MONTANT PAY ET LE LIEU DE LACHAT, EST REQUISE. RESTRICTIONS ET EXCLUSIONS La prsente garantie COUVRE SEULEMENT les dfaillances attribuables un dfaut des matriaux ou un vice de fabrication et NE COUVRE PAS lusure normale ni les dommages esthtiques. La prsente garantie NE COUVRE PAS NON PLUS les dommages subis pendant le transport, les dfaillances causes par des produits non fournis par Panasonic Canada Inc ni celles rsultant dun accident, dun usage abusif ou impropre, de ngligence, dune manutention inadquate, dune mauvaise application, dune altration, dune installation ou de rglages impropres, dun mauvais rglage des contrles de lutilisateur, dun mauvais entretien, dune surtension temporaire, de la foudre, dune modification, de la pntration de sable, de liquides ou dhumidit, dune utilisation commerciale (dans un htel, un bureau, un restaurant ou tout autre usage par affaires ou en location), dune rparation effectue par une entit autre quun centre de service Panasonic agr ou encore dune catastrophe naturelle. Les piles sches sont galement exclues de la prsente garantie. CETTE GARANTIE LIMITE ET EXPRESSE REMPLACE TOUTE AUTRE GARANTIE, EXPRESSE OU IMPLICITE, INCLUANT LES GARANTIES IMPLICITES DU CARACTRE ADQUAT POUR LA COMMERCIALISATION ET UN USAGE PARTICULIER. PANASONIC CANADA INC. NAURA DOBLIGATION EN AUCUNE CIRCONSTANCE POUR TOUT DOMMAGE DIRECT, INDIRECT OU CONSCUTIF RSULTANT DE LUTILISATION DE CE PRODUIT OU DCOULANT DE TOUTE DROGATION UNE GARANTIE EXPRESSE OU IMPLICITE. ( titre dexemples, cette garantie exclut les dommages relatifs une perte de temps, le transport jusqu et depuis un centre de service agr, la perte ou la dtrioration de supports ou dimages, de donnes ou de tout autre contenu en mmoire ou enregistr. Cette liste nest pas exhaustive et nest fournie qu des fins explicatives.) Certaines juridictions ne reconnaissent pas les exclusions ou limitations de dommages indirects ou conscutifs, ou les exclusions de garanties implicites. Dans de tels cas, les limitations stipules ci-dessus peuvent ne pas tre applicables. La prsente garantie vous confre des droits prcis; vous pourriez aussi avoir dautres droits pouvant varier selon votre province ou territoire de rsidence. DEMANDE DE RENSEIGNEMENTS Pour tout renseignement sur les produits et de lassistance technique, veuillez visiter notre page Soutien :

www.panasonic.ca/french/support Pour le remplacement dun produit dfectueux couvert par la garantie, veuillez communiquer avec le revendeur dorigine. Limited Warranty

(ONLY FOR U.S.A.) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Parts Product or Part Name Headphones/Earphones/

Headset Not Applicable All included Accessories During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product which was not sold as is. Not Applicable 90 days Labor 1 year Mail-In Service--Online Repair Request Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at http://shop.panasonic.com/support When shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to:

Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320 PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. As of April 2017