FCC ID: ACJ96NKX-TGD530 Panasonic Cordless Telephone

Operating Instructions Cordless Telephone Model No. KX-TGD510 KX-TGD512 KX-TGD513 Cordless Telephone with Digital Answering Machine Model No. KX-TGD530 KX-TGD532 KX-TGD533 KX-TGD534 KX-TGD535 Model shown is KX-TGD510. Before initial use, see Getting Started on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 52. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 1 2016/10/07 10:05:45 Turning the answering system on/off .........34 Greeting message ......................................34 Listening to messages ...............................35 Remote operation .......................................36 Answering system settings .........................37 Useful Information Voicemail service .......................................39 Wall mounting ............................................40 Error messages ..........................................43 Troubleshooting .........................................44 FCC and other information .........................49 Gua Rpida Espaola Gua Rpida Espaola ...............................52 Appendix Customer services .....................................57 Limited Warranty (ONLY FOR U.S.A.) .......58 Index Index...........................................................60 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................5 Important Information For your safety .............................................6 Important safety instructions ........................7 For best performance ...................................7 Other information .........................................8 Specifications ...............................................9 Getting Started Setting up ...................................................10 Controls ......................................................12 Display icons ..............................................13 Language settings ......................................14 Date and time .............................................14 Recording your greeting message .............14 Other settings .............................................15 Making/Answering Calls Making calls ...............................................16 Answering calls ..........................................16 Useful features during a call .......................17 Intercom .....................................................18 Call Block Call block ....................................................19 Storing unwanted callers ............................19 Phonebook Phonebook .................................................21 Speed dial ..................................................23 Programming Menu list .....................................................24 Alarm ..........................................................29 Silent mode ................................................29 Other programming ....................................30 Registering a unit .......................................30 Caller ID Service Using Caller ID service ...............................32 Caller list ....................................................32 Answering System Answering system ......................................34 2 TGD51x_OI(en)_1007_ver002.pdf 2 2016/10/07 10:05:45 Model composition n KX-TGD510 series n KX-TGD530 series Introduction R Model shown is KX-TGD512. R Model shown is KX-TGD532. Series KX-TGD510 series KX-TGD530 series Model No. KX-TGD510 KX-TGD512 KX-TGD513 KX-TGD530 KX-TGD532 KX-TGD533 KX-TGD534 KX-TGD535 Base unit Part No. KX-TGD510 KX-TGD510 KX-TGD510 KX-TGD530 KX-TGD530 KX-TGD530 KX-TGD530 KX-TGD530 Handset Part No. KX-TGDA50 KX-TGDA50 KX-TGDA50 KX-TGDA50 KX-TGDA50 KX-TGDA50 KX-TGDA50 KX-TGDA50 Quantity 1 2 3 1 2 3 4 5 Accessory information Supplied accessories Supplied handset qty. Accessory item/Part number No. A AC adaptor/PNLV226-0X B Telephone line cord*6 C Wall mounting adaptor*7 D Rechargeable batteries*8 E Handset cover*9 , *10 F Charger*11

*1 KX-TGD510/KX-TGD530 1 units*1 2 units*2 3 units*3 4 units*4 5 units*5 Accessory quantity 1 1 1 2 1 1 1 1 4 2 1 1 1 1 6 3 2 1 1 1 8 4 3 1 1 1 10 5 4 For assistance, please visit http://shop.panasonic.com/support 3 TGD51x_OI(en)_1007_ver002.pdf 3 2016/10/07 10:05:45 Introduction

*2 KX-TGD512/KX-TGD532

*3 KX-TGD513/KX-TGD533

*4 KX-TGD534

*5 KX-TGD535

*6 PQJA10075Y (Black cord), PQJA10075Z (Transparent cord)

*7 PNKL1044Y2 (Black), PNKL1044Y1 (White)

*8 See page 4 for replacement battery information.

*9 The handset cover comes attached to the handset.

*10 PNYNTGDA50BR (Black), PNYNTGDA50WR (White)

*11 PNLC1077ZB (Black), PNLC1077ZW (White) B C D E A F Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 57). Accessory item Rechargeable batteries Range extender Key detector Model number/Specifications HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type:

Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-TGA405*2 KX-TGA20*3

*1 Replacement batteries may have a different capacity from that of the supplied batteries.

*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support

*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:

http://www.panasonic.com/tga20 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. 4 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 4 2016/10/07 10:05:45 Introduction Expanding your phone system Handset (optional): KX-TGDA50 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. Graphical symbols for use on equipment and their descriptions Symbol Symbol Explanation Alternating current (A.C.) Explanation Class P equipment

(equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) ON (power) Direct current (D.C.) Protective earth OFF (power) Protective bonding earth Stand-by (power) Functional earth For indoor use only ON/OFF (power;

push-push) Caution, risk of electric shock For assistance, please visit http://shop.panasonic.com/support 5 TGD51x_OI(en)_1007_ver002.pdf 5 2016/10/07 10:05:45 Important Information For your safety To prevent severe injury and loss of life/

property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF

(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. 6 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 6 2016/10/07 10:05:45 R This product is unable to make calls when:

the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how to recycle this battery. Important Information Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. For assistance, please visit http://shop.panasonic.com/support 7 TGD51x_OI(en)_1007_ver002.pdf 7 2016/10/07 10:05:45 Notice for product disposal, transfer, or return R This product can store your private/

confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 8 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 8 2016/10/07 10:05:45 Important Information Specifications R Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range:

1.92 GHz to 1.93 GHz R RF transmission power:

115 mW (max.) R Power source:

120 V AC, 60 Hz R Power consumption:

Base unit*1:

Standby: Approx. 1.0 W Maximum: Approx. 3.5 W Base unit*2:

Standby: Approx. 1.0 W Maximum: Approx. 4.3 W Charger:

Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:

0 C 40 C (32 F 104 F), 20 % 80 %

relative air humidity (dry)

*1 KX-TGD510 series: page 3

*2 KX-TGD530 seires: page 3 For assistance, please visit http://shop.panasonic.com/support 9 TGD51x_OI(en)_1007_ver002.pdf 9 2016/10/07 10:05:46 Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (

). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (

,

). Getting Started Setting up Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack

(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note:

R Use only the supplied Panasonic AC adaptor PNLV226. R Follow the directions on the display to set up the unit. n Charger Connect the AC adaptor to the power outlet. 10 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 10 2016/10/07 10:05:46 13241114231 Removing the battery Battery charging Charge for about 7 hours. R Confirm Charging is displayed (

R When the batteries are fully charged, Fully charged is displayed.

). Getting Started Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. During a power failure R The unit cannot be used to make or receive calls during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 7. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. Empty For assistance, please visit http://shop.panasonic.com/support 11 TGD51x_OI(en)_1007_ver002.pdf 11 2016/10/07 10:05:46 1211 Getting Started Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 10 hours max.*1 5 days max.*1

*1 If eco mode is on. Note:

R Actual battery performance depends on usage and ambient environment. Controls Handset Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. R Eco mode is turned off when the clarity booster is activated (page 17). N (TALK) Speaker M Dial keypad (*: TONE) MZN (SP-PHONE: Speakerphone) MCALL BLOCKN Microphone Receiver Display MOFFN (

) 12 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 12 2016/10/07 10:05:46 ABAACBHIJGKDEF MFLASHNMCALL WAITN Charge contacts n KX-TGD530 series: page 3 Getting Started n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Base unit n KX-TGD510 series: page 3 Charge contacts MLOCATORN R You can locate a misplaced handset by pressing MLOCATORN. Charge contacts Speaker MLOCATORN R You can locate a misplaced handset by pressing MLOCATORN. Message counter MjN/MkN (VOL.: Volume up/down) MERASEN N (Skip) M N (PLAY/STOP) M Message indicator MANSWER ON/OFFN M N (Repeat) Display icons Handset display items Item Meaning Within base unit range Out of base unit range The line is in use. R When flashing:

The call is put on hold. R When flashing rapidly: An incoming call is now being received. Z Eco mode is on. (page 12) Speakerphone is on.

(page 16) For assistance, please visit http://shop.panasonic.com/support 13 TGD51x_OI(en)_1007_ver002.pdf 13 2016/10/07 10:05:46 ABBDCEAFGHIJ Getting Started Item Meaning Ringer volume is off.

(page 16, 26) Silent mode is on. (page 30) Call sharing mode is off.

(page 28) Alarm is on. (page 29) Handset number Battery level Blocked call (page 19) Clarity booster is on.

(page 17) Answering system is being used by another unit.*1 Someone is using the line. In use Line in use

*1 KX-TGD530 series: page 3 Base unit display item n KX-TGD530 series: page 3 Item Meaning Greeting only is selected. Caller messages are not recorded. (page 38) Language settings Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN Voice announcement language Available for:

KX-TGD530 series (page 3) You can select the language used for the following features. Answering system guidance Talking Caller ID 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2017 07 12 17 3 MOKN 4 Enter the current hour and minute

(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:

R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message Available for:

KX-TGD530 series (page 3) You can record your own greeting message instead of using a pre-recorded greeting message. See page 34 for details. 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN 14 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 14 2016/10/07 10:05:46 Getting Started Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support 15 TGD51x_OI(en)_1007_ver002.pdf 15 2016/10/07 10:05:46 Making/Answering Calls Making calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M N to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:

R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/

M N. R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 M N Erasing a number in the redial list 1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN a MOFFN MERASEN Adjusting the receiver or speaker volume Press MDN or MCN repeatedly while talking. Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 22). Example: If you need to dial the line access number 9 when making outside calls with a PBX:

1 9 a MDN (Pause) 2 Dial the phone number. a M Note:

R A 3.5 second pause is inserted each time N you press MDN (Pause) on the handset. Answering calls 1 Lift the handset and then press M M N when the unit rings. N or 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 27). Temporary handset ringer off: You can turn the ringer off temporarily by pressing M N. Adjusting the ringer volume Handset Press MDN or MCN repeatedly to select the desired volume while ringing. Base unit*1

*1 KX-TGD530 series:page 3 Press MjN or MkN repeatedly to select the desired volume. R To turn the ringer off, press and hold MkN until the unit beeps. One-touch ringer off for the handset Press and hold 0 until the unit beeps to turn the ringer off. While the ringer is turned off, the handset will not ring for calls. R You can turn the ringer on again by pressing and holding 0 until the unit beeps. 16 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 16 2016/10/07 10:05:46 Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold, press M N. R Another handset user can take the call by pressing M N. Note:

R After holding for 10 minutes, the call is disconnected. Mute 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Note:

R MMUTEN is a soft key visible on the display during a call. Flash MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:

R To change the flash time, see page 27. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit Making/Answering Calls that is in use after you hear the call waiting tone. 1 Press MCALL WAITN to answer the 2nd 2 To switch between calls, press MCALL call. WAITN. Note:

R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed. Call share You can join an existing outside call. To join the conversation, press M the other unit is on an outside call. Note:

R A maximum of 3 parties (including 1 outside N when party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 28). Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between handsets. 1 During an outside call, press MMENUN. For assistance, please visit http://shop.panasonic.com/support 17 TGD51x_OI(en)_1007_ver002.pdf 17 2016/10/07 10:05:46 Answering an intercom call 1 Press M N to answer the page. 2 When you finish talking, press MOFFN. Making/Answering Calls 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer:

Press MOFFN. To establish a conference call:

MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold:

MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Intercom Intercom calls can be made between handsets. Note:

R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds. To finish intercom, press MOFFN. To answer the call, press M N. MSELECTN Making an intercom call 1 MMENUN a MbN: Intercom a 2 MbN: Select the desired unit. a MSELECTN 3 When you finish talking, press MOFFN. Note:

R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. 18 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 18 2016/10/07 10:05:46 Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list:

when an incoming call is being received when an incoming call is being recorded by the answering system*1 when talking on an outside call

*1 KX-TGD530 series: page 3 Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, Caller blocked is displayed, and then the call is disconnected. situations shown above. Note:

R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available for intercom calls or calls received by call waiting. R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). Block a single number: The unit blocks calls from specific phone numbers stored in the call block list. Block range of numbers: The unit blocks calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. Block unknown CID: The unit blocks calls that have no phone number. Call Block Single phone numbers and ranges of numbers can be stored in the call block list up to 150 items in total. Blocking unwanted callers:

When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 If you do not want this one ring to sound, select No in Turning the first ring on/

off (page 20). Storing a single phone number Important:

R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list 1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number: MMENUN a MbN:

Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary (24 digits max.). a MSAVEN a MOFFN Adding call blocked numbers manually 1 MCALL BLOCKN 2 MbN: Block a single number a 3 MMENUN a MbN: Add a MSELECTN MSELECTN For assistance, please visit http://shop.panasonic.com/support 19 TGD51x_OI(en)_1007_ver002.pdf 19 2016/10/07 10:05:46 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. 4 To edit a number:

R After viewing, press MOFFN to exit. MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:

MERASEN a MbN: Yes a MSELECTN a MOFFN Note:

R When editing, press the desired dial key to add digits and press MCLEARN to erase digits. Erasing all call block numbers 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN MSELECTN Call Block 4 Enter the phone number (24 digits max.). a MSAVEN a MOFFN Storing a range of number 1 MCALL BLOCKN 2 MbN: Block range of numbers a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). a MSELECTN MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 MCALL BLOCKN 2 MbN: Block unknown CID a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Turning the first ring on/off You can choose whether the first ring sounds when a call is received. Yes (default): The first ring for all calls will be heard, including calls from blocked phone numbers. No: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers. 1 MCALL BLOCKN 2 MbN: One ring for blocked call 3 MbN: Select the desired setting. a a MSELECTN MSAVEN a MOFFN Viewing/editing/erasing call block numbers 1 MCALL BLOCKN 20 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 20 2016/10/07 10:05:46 Phonebook character is fixed and the cursor moves to the next space. Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. 1 MEN REDIAL 2 MbN: Select the desired entry. a MSAVEN 3 To store the name, continue from step 3, Editing entries, page 22. Note:

R The name stored in the phonebook will be reflected in the redial list after you make a call using that phonebook entry. Storing caller information to the phonebook 1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN:

Phonebook a MSELECTN a Go to step 4. 3 MbN: Save phonebook a MSELECTN 4 Continue from step 3, Editing entries, page 22. Groups Groups can help you find entries in the phonebook quickly and easily. You can change the names of groups assigned for phonebook entries (Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 21). Important:

R All entries can be shared by any registered handset. Adding phonebook entries 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note:

R In step 3, you can switch the language for entering characters.

# a MbN: Select the desired language. a MOKN Entering characters Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. The following operations are also available. Key

*

MFN MEN MCLEARN Operation Switch between the uppercase and lowercase

(A a) Move the cursor Erase the character or number R To erase all, press and hold it. R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 2 seconds after entering a character, the For assistance, please visit http://shop.panasonic.com/support 21 TGD51x_OI(en)_1007_ver002.pdf 21 2016/10/07 10:05:46 Phonebook Changing group names/setting ringer ID The default group name is Group 1 to Group 9. 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a 4 To change group names MSELECTN MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:

Select the desired ringer tone. a MSAVEN 5 MOFFN 5 MbN: Select the desired group (page 21). a MSELECTN 2 times a MOFFN Erasing entries Erasing an entry 1 Find the desired entry (page 22). 2 MMENUN a MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Erasing all entries 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 3 MbN: Yes a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN Finding and calling from a phonebook entry 1 MFN W 2 To scroll through all entries MbN: Select the desired entry. To search by first character To search by group Press the dial key (0 to 9, or #) which contains the character you are searching for. MbN: Scroll through the phonebook if necessary. MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary. N 3 M Editing entries 1 Find the desired entry (page 22). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MFN W. 2 MbN: Select the desired entry. 3 Press MCALLN to dial the number. Note:

R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 16). R If you have rotary/pulse service, you need to press * (TONE) before pressing MFN W in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding *

(TONE) to the beginning of phone numbers you wish to chain dial (page 21). 22 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 22 2016/10/07 10:05:46 Phonebook Viewing an entry/Making a call 1 Press and hold the desired speed dial key 2 To make a call, press M

(1 to 9). N. Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters 4 Enter the partys phone number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN n From the phonebook:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:

R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key.

(1 to 9). a MMENUN Editing an entry 1 Press and hold the desired speed dial key 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN a MSELECTN a MOFFN Erasing an entry 1 Press and hold the desired speed dial key 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN

(1 to 9). a MMENUN For assistance, please visit http://shop.panasonic.com/support 23 TGD51x_OI(en)_1007_ver002.pdf 23 2016/10/07 10:05:46 Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 Press MCN or MDN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note:

R To exit the operation, press MOFFN. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:

Operation Viewing the caller list. Answering device*1 Main menu:

Sub-menu 1 Play new message Play all message Erase all message*2 Greeting Sub-menu 2 Settings Record greeting*2 Check greeting Pre-recorded*2

(Reset to pre-recorded greeting) Code

#280 Code

#213 Code

#323

#324

#325

#302

#303

#304 22 32 35 35 36 34 35 35 24 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 24 2016/10/07 10:05:46 Sub-menu 1 Settings Sub-menu 2 Ring count*2 Recording time*2 Remote code*2 Screen call Voicemail access Answer on*2 Answer off*2 Main menu:

Operation Listening to voicemail messages. Intercom Main menu:

Operation Paging the desired unit. Set date & time Sub-menu 2 Main menu:

Sub-menu 1 Date and time*2 Memo alarm Alarm1-3 Time adjustment*2, *4 Speed dial Main menu:

Operation Viewing the speed dial entry. Settings Toll saver 2-7 rings

<4 rings>

<3 min>

1 min Greeting only*3

<111>

<On>Off Settings

<Off>

Once Daily Weekly

<Caller ID auto>

Manual Programming Code

#211

#305

#306

#310

#327

#328 Code

#330 Code

#274 Code

#101

#720 37 37 36 37 34 34 39 18 14 29

#226 Code

#261 23 For assistance, please visit http://shop.panasonic.com/support 25 TGD51x_OI(en)_1007_ver002.pdf 25 2016/10/07 10:05:46 Programming Main menu:

Sub-menu 1 Ring adjustments Settings Sub-menu 2 Ringer volume

(Handset) Ringer tone*5, *6

(Handset) Silent mode Set date & time Talking caller ID*1 Key detector setting*7 1: Add new device (for Detector1)*8 2: Add new device (for Detector2) 3: Add new device (for Detector3) 4: Add new device (for Detector4) Date and time*2 Memo alarm Alarm1-3 Time adjustment*2, *4 Handset Base unit*2 Change name*2 Registration Deregistration Settings Off6 <6>

<Tone 1>

On/Off On

<Off>

Start/End

<11:00 PM/

06:00 AM>

Select group Group 1-9

<Off>

Once Daily Weekly

<Caller ID auto>

Manual

<On>Off On

<Off>

Detector1 Detector2*9 Detector3*9 Detector4*9 30 30 30 14 29 32 Code

#160

#161

#238

#237

#241

#101

#720

#226

#162

#G162

#6561

#6562*9

#6563*9

#6564*9

#6571

#6572*9

#6573*9

#6574*9

#6581

#6582*9

#6583*9

#6584*9 26 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 26 2016/10/07 10:05:46 Sub-menu 1 Call block*2 Speed dial Record greeting*1, *2 Voicemail LCD contrast

(Display contrast) Handset name Display name Key tone Caller ID edit

(Caller ID number auto edit) Auto talk*10 Set tel line Sub-menu 2 Block a single number Block range of numbers Block unknown CID

(CID: Caller ID) One ring for blocked call Settings Block

<Unblock>

<Yes>

No Save VM access#*2

(VM: Voicemail) VM tone detect*2 Set dial mode*2 Set flash time*2, *11 Set line mode*2, *12

<On>

Off Level 14 <2>

On

<Off>

<On>Off

<On>

Off On

<Off>

<Tone>

Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms

<700 ms>

900 ms A <B>

Programming Code

#217

#240

#173

#261

#302

#331

#332

#145

#104

#105

#165

#214

#200

#120

#121 19 20 20 20 23 34 39 39 30 30 33 16 15 17

#122 For assistance, please visit http://shop.panasonic.com/support 27 TGD51x_OI(en)_1007_ver002.pdf 27 2016/10/07 10:05:46 Programming Sub-menu 1 Call sharing*2 Registration Change language Sub-menu 2 Register handset Deregistration*3 Display Announcement*2 Settings

<On>

Off

<English>

Espaol

<English>

Espaol Customer support Main menu:

Operation Displaying customer support Web address. Code

#194

#130

#131

#110

#112 Code

#680 17 30 31 14 14 Key detector*7 Sub-menu 2 Main menu:

Sub-menu 1 Search Battery check

*1 KX-TGD530 series:page 3

*2 If you program these settings using one of the units, you do not need to program the same Code

#655 Settings

*3 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.

*4 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 14). 2004 - 2013 Copyrights Vision Inc. 2). If you select a melody, you cannot distinguish lines by their ringers.

*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to

*6 The preset melodies in this product (Tone 3 - Melody 10) are used with permission of

*7 This setting is available when you have the key detector (KX-TGA20). Read the installation

*8 For models with supplied key detectors, the display shows 1: Detector1.

*9 If you register 2 or more key detectors.

*10 If you subscribe to a Caller ID service and want to view the callers information after lifting up manual for more information on the key detector.

*11 The flash time depends on your telephone exchange or host PBX. Contact your PBX the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call. 28 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 28 2016/10/07 10:05:46 Programming

*12 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals

(snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:

R Make sure the units date and time setting is correct (page 14). 1 MMENUN#720 2 MbN: Select the desired alarm. a 3 MbN: Select the desired alarm option. a MSELECTN MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:

Enter the desired month and date. a MOKN n Weekly:

MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN a MOKN 7 Enter a text memo (10 characters max.). 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. a MSAVEN 9 MbN: Select the desired snooze setting. 10 MSELECTN a MOFFN Note:

R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature

(page 21), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important:

R Make sure the units date and time setting is correct (page 14). R We recommend turning the base unit ringer off (page 16) in addition to turning the silent mode on. (KX-TGD530 series: page 3) For assistance, please visit http://shop.panasonic.com/support 29 TGD51x_OI(en)_1007_ver002.pdf 29 2016/10/07 10:05:47 Programming R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMENUN#238 2 MbN: Select the desired setting. a exit. wish to start this feature. MSAVEN R If you select Off, press MOFFN to 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN Changing the start and end time 1 MMENUN#237 2 Continue from step 3, Turning silent mode on/off, page 30. Selecting groups to bypass silent mode 1 MMENUN#241 2 MbN: Select the desired groups. a MSELECTN R group numbers. is displayed next to the selected R To cancel the selected group:

MbN: Select the group. a Press MSELECTN again. disappears. 3 MSAVEN a MOFFN Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 30). 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. 1 MMENUN#105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:

R See page 5 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:

2 Base unit:

Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. MMENUN#130 3 Handset:

Press MOKN, then wait until a long beep sounds. 30 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 30 2016/10/07 10:05:47 Programming Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to 3 MbN: Yes a MSELECTN a MOFFN cancel. a MSELECTN For assistance, please visit http://shop.panasonic.com/support 31 TGD51x_OI(en)_1007_ver002.pdf 31 2016/10/07 10:05:47 Caller ID Service Using Caller ID service Important:

R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:

Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Missed calls If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:

R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:

A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Talking Caller ID Available for:

KX-TGD530 series (page 3) Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:

subscribe to a Caller ID service of your phone service provider. turn this feature on (page 26). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your phone service provider following every ring. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:

R Make sure the units date and time setting is correct (page 14). Viewing the caller list and calling back 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M To exit, press MOFFN. N. 32 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 32 2016/10/07 10:05:47 Caller ID Service Erasing selected caller information 1 MCN CID 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN a MOFFN Erasing all caller information 1 MCN CID 2 MERASEN a MbN: Yes a MSELECTN a MOFFN Note:

R If the entry has already been viewed or answered, is displayed. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. 1 MCN CID 2 MbN: Select the desired entry. a MMENUN 3 MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the phone number is shown in the desired format. 5 M N Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:

When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit

(page 27). The default setting is On. Note:

R Phone numbers from the 4 most recently edited area codes are automatically edited. For assistance, please visit http://shop.panasonic.com/support 33 TGD51x_OI(en)_1007_ver002.pdf 33 2016/10/07 10:05:47 Answering System Answering system Available for:

KX-TGD530 series (page 3) The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 37). Important:

R Make sure the units date and time setting is correct (page 14). Memory capacity (including your greeting message) The total recording capacity is about 17 minutes. A maximum of 64 messages can be recorded. Note:

R When message memory becomes full:

Messages full is shown on the The message counter on the base unit handset display. flashes if the answering system is turned on. If you use the pre-recorded greeting message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Handset 1 To turn on:

MMENUN#327 To turn off:

MMENUN#328 2 MOFFN Note for base unit and handset:

R When the answering system is turned on, the message counter on the base unit displays the total number of messages (old and new). Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:

your own greeting message a pre-recorded greeting message Recording your greeting message 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:

If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. If the message recording time (page 37) 34 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 34 2016/10/07 10:05:47 Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Using the base unit When new messages have been recorded, M Press M N (PLAY). R During playback, M N on the base unit flashes. N on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Key MjN or MkN M N N N (STOP) M M MERASEN Operation Adjust the speaker volume Repeat message*1 Skip message Stop playback Erase currently playing message

*1 If pressed within the first 5 seconds of a message, the previous message is played. Answering System Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:

MMENUN#323 To listen to all messages:

MMENUN#324 2 When finished, press MOFFN. Note:

R To switch to the receiver, press M R You can also use the MPLAYN soft key, if N. displayed, to play new messages. Operating the answering system MMENUN a MbN: Answering device a MSELECTN Key MDN or MCN 1 or MFN 2 or MEN 3 4 5 6 76 8 MPAUSEN 9 or MSTOPN 0

*4*3

*5 Operation Adjust the receiver/speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Pause message*2 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages For assistance, please visit http://shop.panasonic.com/support 35 TGD51x_OI(en)_1007_ver002.pdf 35 2016/10/07 10:05:47 Answering System Key

*6 Operation Reset to a pre-recorded greeting message

*1 If pressed within the first 5 seconds of a

*2 To resume playback:

message, the previous message is played. MbN: Playback a MSELECTN

*3 You can also erase as follows:

MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Calling back (Caller ID subscribers only) 1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN Editing the number before calling back 1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format

(page 33). a M N Erasing all messages 1 MMENUN#325 2 MbN: Yes a MSELECTN a MOFFN Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:

R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMENUN#306 2 Enter the desired 3-digit remote access code. a MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 36. R The entered remote access code is deleted. Using the answering system remotely 1 Dial your phone number from a 2 After the greeting message starts, enter 3 Follow the voice guidance prompts as your remote access code. touch-tone phone. necessary or control the unit using remote commands (page 37). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 37). Note:

R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. 36 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 36 2016/10/07 10:05:47 Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key 1 2 4 5 9 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0

*4 Erase currently playing message

*5 Erase all messages

*# End remote operation

(or hang up)

*1 If pressed within the first 5 seconds of a message, the previous message is played.

*2 For English voice guidance only

*3 For Spanish voice guidance only touch-tone phone. Turning on the answering system remotely 1 Dial your phone number from a 2 Let the phone ring 15 times. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 36). R A long beep is heard. Answering System Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the units speaker. To adjust the speaker volume, press MDN or MCN repeatedly. You can answer the call by pressing M the handset. Call screening can be set for each unit. The default setting is On. 1 MMENUN#310 2 MbN: Select the desired setting. a N on MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 36), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support 37 TGD51x_OI(en)_1007_ver002.pdf 37 2016/10/07 10:05:47 Answering System Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 37. Note:

R When you select Greeting only:

the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 34). 38 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 38 2016/10/07 10:05:47 Voicemail service In addition to your units answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the units answering system. R To use the voicemail service rather than the units answering system, turn off the answering system (page 34). If you have units answering system set to on and also the voicemail enabled, the system with least amount of rings will record the message first. Example:

If the units answering system is set to 4 rings

(page 37) and the voicemail answering system provided by your phone company is set to 6 rings (call your service provider), the units answering system will record the incoming call first. Storing the voicemail (VM) access number In order to listen to your voicemail messages, you must dial your phone service providers voicemail access number. Once you have stored your voicemail access number, you can dial it automatically (page 39). 1 MMENUN#331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:

R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 16) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Useful Information Example:

To erase the voicemail access number 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Your phone service provider sends special signals (sometimes called voicemail tones or stutter tones) to the unit to let you know you have new voicemail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M handset, you have new voicemail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voicemail messages have been recorded. Turn this feature off when:

You do not subscribe to voicemail service. Your phone service provider does not send N on the voicemail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your phone service provider. Turning VM tone detection on/off The default setting is On. 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to voicemail messages When new messages have been recorded, Voicemail msg. via phone co. is displayed if message indication service is available. 1 MMENUN#330 R The speakerphone turns on. For assistance, please visit http://shop.panasonic.com/support 39 TGD51x_OI(en)_1007_ver002.pdf 39 2016/10/07 10:05:47 1-222-333-4444VM access numberPausesPasswordPPPP8888 Useful Information 2 Follow the pre-recorded instructions. 3 When finished, hang up. Note:

R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Wall mounting Note:

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Base unit 1 Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 2 Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the AC adaptor cord and telephone line cord

(B). AC adaptor cord 40 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 40 2016/10/07 10:05:47 1A1 3 Insert the hooks on the wall mounting

) on the

) and (

adaptor into holes (

base unit. Useful Information 5 Mount the unit on a wall then slide down to secure in place. AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 83 mm (3 1/4 inches) 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (

) respectively.

) and (

4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. For assistance, please visit http://shop.panasonic.com/support 41 TGD51x_OI(en)_1007_ver002.pdf 41 2016/10/07 10:05:47 121212123451542345 Useful Information To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). Charger Drive the screws (

wall. 27.2 mm (1 1/16 inches)

) (not supplied) into the 42 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 42 2016/10/07 10:05:47 BAA1212 Error messages Display message Ask phone company for VM access #

Main unit no power orNo link. Re-

connect base AC adaptor. Busy Check tel line Error!!

Invalid Requires subscription to Caller ID. Use rechargeable battery. Useful Information Cause/solution R You have not stored the voicemail access number. Store the number (page 39). R Confirm the base units AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handsets registration may have been canceled. Re-register the handset (page 30). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 10). R Recording was too short. Try again. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 30). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 7. For assistance, please visit http://shop.panasonic.com/support 43 TGD51x_OI(en)_1007_ver002.pdf 43 2016/10/07 10:05:47 Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. I cannot hear a dial tone. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 10). R Fully charge the batteries (page 11). R Check the connections (page 10). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 30). R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Battery recharge Problem The handset beeps and/or flashes. Cause/solution R Change the display language (page 14). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 31). Cause/solution R Battery charge is low. Fully charge the batteries (page 11). 44 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 44 2016/10/07 10:05:47 Useful Information Cause/solution R Clean the battery ends (

,

) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 10). Problem I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset does not ring. The base unit does not ring. I cannot make a call. I cannot make long distance calls. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it

(page 30). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume is turned off. Adjust the ringer volume R Silent mode is turned on. Turn it off (page 30). R The ringer volume is turned off. Adjust the ringer volume

(page 16, 26).

(page 16). R Silent mode is turned on. Turn it off (page 30). R The dialing mode may be set incorrectly. Change the setting (page 15). R Make sure that you have long distance service. For assistance, please visit http://shop.panasonic.com/support 45 TGD51x_OI(en)_1007_ver002.pdf 45 2016/10/07 10:05:47 Useful Information Caller ID/Talking Caller ID Problem Caller information is not displayed. Caller information is displayed or announced late. Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. The 2nd callers information is not displayed during an outside call. Cause/solution R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service may not be available in some areas. Contact your phone service provider for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. R Depending on your phone service provider, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. R The handset or base units ringer volume is turned off. Adjust it (page 16, 26). R The Talking Caller ID feature is turned off. Turn it on R The number of rings for the answering system is set to 2

(page 26). rings or Toll saver. Select a different setting

(page 37). R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 27). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 33). changes the time. Set the time adjustment to Manual

(off) (page 26). R Incorrect time information from incoming Caller ID R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). 46 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 46 2016/10/07 10:05:47 Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. The unit does not emit the specified number of rings. Voicemail Problem Voicemail msg. via phone co. is shown on the handset display. How do I remove this message from the display?

Useful Information messages (page 35, 35). Cause/solution R The answering system is turned off. Turn it on (page 34). R The message memory is full. Erase unnecessary R The recording time is set to Greeting only. Change R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 37) to a lower value, or contact your phone service provider. the setting (page 37). R The answering system will not answer incoming calls while the other devices such as handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 36). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code

(page 36). R The answering system is turned off. Turn it on (page 37). R If the first ring is turned off (No) (page 20), the number of rings decreases by 1 from the specified number of rings. Cause/solution R This notification is displayed when your phone service providers voicemail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. For assistance, please visit http://shop.panasonic.com/support 47 TGD51x_OI(en)_1007_ver002.pdf 47 2016/10/07 10:05:47 Useful Information Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:

R To avoid permanent damage, do not use a microwave oven to speed up the drying process. 48 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 48 2016/10/07 10:05:47 FCC and other information Useful Information For assistance, please visit http://shop.panasonic.com/support 49 TGD51x_OI(en)_1007_ver002.pdf 49 2016/10/07 10:05:47 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information 50 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 50 2016/10/07 10:05:47 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearbyTVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information For assistance, please visit http://shop.panasonic.com/support 51 TGD51x_OI(en)_1007_ver002.pdf 51 2016/10/07 10:05:48 Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola 52 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD51x_OI(en)_1007_ver002.pdf 52 2016/10/07 10:05:48 ConexionesUnidad base1 Conecte el adaptador de corriente alterna a la unidad presionndolo firmemente.2 Conecte el adaptador de corriente alterna a la toma de corriente.3 Conecte el cable de la lnea telefnica a la unidad, y despus a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.4 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.Nota:LUse solo el adaptador de corriente alterna Panasonic PNLV226 que se suministra.1324Cargador1 Conecte el adaptador de corriente alterna a la toma de corriente.1 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 53 TGD51x_OI(en)_1007_ver002.pdf 53 2016/10/07 10:05:48 Instalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tamao AAA (R03) ().LNO utilice bateras alcalinas, de manganeso ni de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla.LConfirme que aparezca Cargando ().Retire la bateraSugerencias de operacinTeclas de funcinAl oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin.Tecla navegadora-{^}, {V}, {<}, o {>}: Navegue por diversas listas y elementos.-VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.-{<} k: Vea la entrada del directorio telefnico.-{>} REDIAL (Remarcacin): Vea la lista de remarcacin.-{V} CID (identificador de llamadas): Vea la lista de personas que llamaron.2142311212{V}{^}{<}{>} Gua Rpida Espaola 54 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD51x_OI(en)_1007_ver002.pdf 54 2016/10/07 10:05:48 Cambio de idiomas (Auricular) (predeterminado: English)Cuando instale las bateras por primera vez, es posible que aparezca Set date/time Press SELECT. Oprima {OFF} para salir.Idioma de la pantalla{MENU}(11) s {r}: Espaol s {GUARDAR} s {OFF}Idioma de anuncio de vozDisponible para: serie KX-TGD530{MENU}(112 s {r}: Espaol s {GUARDAR} s {OFF}Fecha y hora (Auricular)1{MENU}(1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales (formato de reloj de 24 horas).4{GUARDAR} s {OFF}Cmo grabar el mensaje de saludo del contestador de llamadas (Auricular: serie KX-TGD530)Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado.1{MENU}(3)2 s {r}: S s {SELEC.}2Despus de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20 cm (8 pulgadas) y hable con claridad en el micrfono (mx. de 2 minutos).3Oprima {PARAR} para dejar de grabar. s {OFF}Operaciones bsicasCmo hacer y contestar llamadas (Auricular)Para hacer llamadasMarque el nmero telefnico. s {C}/{s}Para contestar llamadas{C}/{s}Para colgar{OFF}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin{>} REDIAL s {r}: Seleccione la entrada deseada. s {C}Para ajustar el volumen del timbre del auricularOprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra. Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 55 TGD51x_OI(en)_1007_ver002.pdf 55 2016/10/07 10:05:48 Directorio telefnico (Auricular)Para aadir entradas1{<} k s {MENU}2{r}: Agregar Ent. Nueva s {SELEC.}3Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}4Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK}5{r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF}LEn el paso 3, puede cambiar el idioma de introduccin de caracteres.( s {r}: Seleccione el idioma deseado. s {OK}Para hacer llamadas{<} k s {r}: Seleccione la entrada deseada. s {C}Sistema contestador de llamadas (Unidad base: serie KX-TGD530)Contestador encendido/apagadoOprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas.Para escuchar mensajes{P} (PLAY)Sistema contestador de llamadas (Auricular: serie KX-TGD530)Para escuchar mensajesPara escuchar mensajes nuevos:{REPROD.} o {MENU}(323Para escuchar todos los mensajes:{MENU}(324Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {MENU}(13)2Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de volumen {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base,visite: http://shop.panasonic.com/supportOperaciones bsicas Gua Rpida Espaola 56 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD51x_OI(en)_1007_ver002.pdf 56 2016/10/07 10:05:48 Es posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-TGDA50), visite: http://shop.panasonic.com/support Los usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-877-833-8855.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (segunda llamada)?LOprima {CALL WAIT} cuando escuche el tono de llamada en espera.Preguntas frecuentesPreguntaCausa y solucin Customer services Appendix For assistance, please visit http://shop.panasonic.com/support 57 TGD51x_OI(en)_1007_ver002.pdf 57 2016/10/07 10:05:48 Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informaon, Operang Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Appendix Limited Warranty (ONLY FOR U.S.A.) 58 For assistance, please visit http://shop.panasonic.com/support TGD51x_OI(en)_1007_ver002.pdf 58 2016/10/07 10:05:48 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix For assistance, please visit http://shop.panasonic.com/support 59 TGD51x_OI(en)_1007_ver002.pdf 59 2016/10/07 10:05:48 Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 Registration: 30 Hold: 17 Intercom: 18 I K Key detector: 26, 28 Key tone: 27 Line mode: 27 L M Making calls: 16 Missed calls: 32 Mute: 17 Pause: 16 Phonebook: 21 Power failure: 11 P T S R Redialing: 16 Ringer ID: 22 Ringer tone: 26 Rotary/pulse service: 17 Silent mode: 29 Speed dial: 23 SP-PHONE (Speakerphone): 16 Talking Caller ID: 32 Temporary tone dialing: 17 Time adjustment: 26 Transferring calls: 17 Troubleshooting: 44 TTY: 57 VM (Voicemail): 39 Voice announcement language: 14 Voicemail: 39 Volume V Receiver: 16 Ringer (Base unit): 16 Ringer (Handset): 16, 26 Speaker: 16 W Wall mounting: 40 Index Index

#

3-way conference: 17 A Additional handset: 30 Alarm: 29 Answering calls: 16 Answering system Call screening: 37 Erasing messages: 35, 36, 37 Greeting message: 34 Greeting only: 37 Listening to messages: 35, 36 Number of rings: 37 Recording time: 37 Remote access code: 36 Remote operation: 36 Ring count: 37 Toll saver: 37 Turning on/off: 34 Auto talk: 16, 27 B Battery: 10, 11 Booster (Clarity booster): 17 C Call block: 19 One ring for blocked call: 20 Call share: 17, 28 Call waiting: 17 Call Waiting Caller ID: 17 Caller ID number auto edit: 27, 33 Caller ID service: 32 Caller list: 32 Caller list edit: 33 Chain dial: 22 CID (Caller ID): 32 Conference calls: 17 Control type: 13 Customer support: 28 D Date and time: 14 Dialing mode: 15 Direct command code: 24 Display E Contrast: 27 Language: 14 Eco mode: 12 Error messages: 43 Flash: 17, 27 F G Groups: 21 H Handset Deregistration: 31 Name: 30 60 TGD51x_OI(en)_1007_ver002.pdf 60 2016/10/07 10:05:48 Notes 61 TGD51x_OI(en)_1007_ver002.pdf 61 2016/10/07 10:05:48 Notes 62 TGD51x_OI(en)_1007_ver002.pdf 62 2016/10/07 10:05:48 Notes 63 TGD51x_OI(en)_1007_ver002.pdf 63 2016/10/07 10:05:48 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.

(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2016 Printed in Malaysia

*PNQX8349ZA*

*PNQX8349ZA*

PNQX8349ZA PP1116YK0 TGD51x_OI(en)_1007_ver002.pdf 64 2016/10/07 10:05:48 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. . .IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490

INTERNAL PHOTOGRAPHS Internal View Main Board Main Board RF part

EXTERNAL PHOTOGRAPHS KX-TGD530 Top View Bottom View

EXHIBIT B MARKINGS Base Unit:

The base unit provides with the following marking, or equivalent. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. NOTE: Above markings are shown on bottom of the base unit.

Ben Botros, Project Manager Product Safety and Compliance Department Power of Attorney November 16, 2016 PCTP-17-F003A Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern;

Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing:

Model Numbers:

Original Application for 1.9 GHz DECT Cordless Telephone Base Station 1 KX-TGD530(xx), KX-TGD532(xx), KX-TGD533(xx), KX-TGD534(xx), KX-TGD535(xx), KX-TG3722(xx), KX-TG3723(xx), KX-TG733SK, KX-TG734SK, KX-TGD510(xx), KX-TGD512(xx), KX-TGD513(xx), KX-TG3712(xx), KX-TG3713(xx) Isochronous UPCS Base Station (PUB) ACJ96NKX-TGD530 FCC Part 15, Subpart D 1921.536 ~ 1928.448 5 RF Channels / 5x12 = 60 TDMA Duplex Channels Mobile / MPE (requires minimum 20cm spacing between antenna and body) Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 FCC Classification:

FCC ID:

FCC Rule Part:

Frequency Range:

Number Channels:

RF Exposure:

Responsible Applicant & Grantee:

Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Product Safety and Compliance Department 1 Base Station will be used with Handset, which will be separately certified under FCC ID: ACJ96NKX-TGDA51. Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / ben.botros@us.panasonic.com Ben Botros, Project Manager Product Safety and Compliance Department Request for Confidentiality November 16, 2016 PCTP-17-F003A Federal Communication Commission Equipment Authorization Division/ Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern;

Type Filing:

Model Numbers:

Original Application for 1.9 GHz DECT Cordless Telephone Base Station 2 KX-TGD530(xx), KX-TGD532(xx), KX-TGD533(xx), KX-TGD534(xx), KX-TGD535(xx), KX-TG3722(xx), KX-TG3723(xx), KX-TG733SK, KX-TG734SK, KX-TGD510(xx), KX-TGD512(xx), KX-TGD513(xx), KX-TG3712(xx), KX-TG3713(xx) Base Station contains DECT Transmitter ACJ96NKX-TGD530 Product Description:

FCC ID:

In accordance with provisions of Sections 0.457(d) and 0.459 of the Commissions Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain:

(1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Base Unit and RF Unit; and (4) Base Unit Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Base Unit and RF Unit; (2) Internal Photographs of Base Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Product Safety and Compliance Department 2 Base Station will be used with Handset, which will be separately certified under FCC ID: ACJ96NKX-TGDA51. Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / ben.botros@us.panasonic.com