all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual Part 1 | Users Manual | 2.25 MiB | / December 04 2004 | |||
1 2 |
|
Users Manual Part 2 | Users Manual | 918.14 KiB | / December 04 2004 | |||
1 2 | Cover Letter(s) | / December 04 2004 | ||||||
1 2 | Cover Letter(s) | November 05 2004 / December 04 2004 | ||||||
1 2 | External Photos | / December 04 2004 | ||||||
1 2 | ID Label/Location Info | / December 04 2004 | ||||||
1 2 | Cover Letter(s) | / December 04 2004 | ||||||
1 2 | Test Report | / December 04 2004 | ||||||
1 2 | Internal Photos | / December 04 2004 | ||||||
1 2 | RF Exposure Info | / December 04 2004 | ||||||
1 2 | RF Exposure Info | / December 04 2004 | ||||||
1 2 | Test Report | / December 04 2004 | ||||||
1 2 | Test Setup Photos | / December 04 2004 | ||||||
1 2 | Cover Letter(s) | / December 04 2004 |
1 2 | Users Manual Part 1 | Users Manual | 2.25 MiB | / December 04 2004 |
Personal Computer OPERATING INSTRUCTIONS Model No. CF-29 Series Contents Getting Started Read Me First.................................................. 3 Names and Functions of Parts ........................ 9 First-time Operation ...................................... 11 Reference Manual Read Me First Key Combinations LED Indicators Operation Starting Up/Shutting Down ............................ 16 Touch Pad (Basic Operation) ............................. 19 Reference Manual ......................................... 20 Useful Information ......................................... 21 Reference Manual Touch Pad Touchscreen Panasonic Hand Writing Standby/Hibernation Functions Security Measures Computing on the Road Battery Power Multimedia Pocket PC Cards RAM Module Port Replicator External Display Printer USB Devices Modem LAN Wireless LAN Hard Disk Drive Setup Utility Troubleshooting List of Error Codes ........................................ 25 Dealing with Problems (Summary) ....................... 26 Reinstalling Software .................................... 30 Reference Manual Technical Information DMI Viewer List of Error Codes Dealing with Problems
(Advanced) Appendix LIMITED USE LICENSE AGREEMENT .......... 32 Hard Disk Backup Function ............................. 34 Hard Disk Data Erase Utility ............................ 38 Specifications ................................................... 39 LIMITED WARRANTY ..................................... 41 d e t r a t S g n i t t e G n o i t a r e p O g n i t o o h s e l b u o r T i x d n e p p A XP 2000
[Additional Manual]
Reference Manual This manual can be accessed on your computer. Refer to page 20 on how to access the Reference Manual. Please read these instructions carefully before using this product and save this manual for future use. Customer's Record Dealer's Name Dealer's Address Model No.*
Serial No. or Code No. Date of Purchase
* For the Model No., insert the 12 digit number (for example, CF-29CTKGZKM) located on the bottom of the computer. Introduction Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer. Illustrations and Terminology in this Manual NOTE provides a useful fact or helpful information. NOTE:
CAUTION indicates a condition that may result in minor or moderate injury. CAUTION:
WARNING indicates a hazard that may result in moderate or serious injury. WARNING:
Windows XP :
Information for Microsoft Windows XP Professional users. Windows or Windows XP in this manual. Windows 2000 : Information for Microsoft Windows 2000 Professional users. Windows or Windows 2000 in this Enter :
Fn + F5 :
[Start] - [Run]:
manual. This illustration means to press the [Enter] key. This illustration means to press and hold the [Fn] key, then press the [F5] key. This illustration means to click [Start], then to click [Run]. For some applications, you may need to double-
click. Where to go for referred information. This illustration means to refer to the Reference Manual, which is available on your computer. Refer to page 20 on how to access this manual. Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. The CD drive is a description about drives, such as DVD-ROM, CD-ROM, CD-R/RW, and DVD-ROM & CD-R/RW drives. This manual covers two types of models, as distinguished by the type of LCD screen (models with touchscreen and models without touchscreen). If the user has logged on without the administrator authority, some functions may not be executable, and some screens may be not displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions. Confirm the latest information on optional products in catalogs, etc. Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. PS/2 is a registered trademark of International Business Machines Corporation. Intel, Pentium, SpeedStep and PROSet are either registered trademarks or trademarks of Intel Corporation. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. d e t r a t S g n i t t e G 2 Read Me First For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra-
dio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC RF Exposure Warning:
This computer is provided with PC Card slot that could be used with wireless transmitter(s), which will be specifically recom-
mended, when they become available. Other third-party wire-
less transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and minimum 2.5 cm spacing must be provided between antenna and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This transmitter must not be co-located or operated in conjunc-
tion with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) FCC Regulation Notice for modem This equipment contains a FCC approved modem. Manufacturer of modem: AMBIT Microsystems Corporation Model No. T60M283.** (** = numbers or alphabet letters) Tested To Comply With FCC Standards FOR HOME OR OFFICE USE 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number
(REN) for this equipment. If required, this information must be provided to the telephone company. 2. An FCC compliant telephone cord and modular plug is pro-
vided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring us-
ing a compatible modular jack which is Part 68 compliant. See Installation Instructions for details. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in re-
sponse to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as deter-
mined by the total RENs, contact the local telephone com-
pany. 4. If your telephone equipment cause harm to the telephone net-
work, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will no-
tify the customer as soon as possible. Also, you will be ad-
vised of your right to file a complaint with the FCC if you believe it is necessary. 5. The telephone company may take changes in its facilities, equipment, operations or procedures that could affect the op-
eration of the equipment. If this happens the telephone com-
pany will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. 6. If trouble is experienced with this equipment, for repair or warranty information, please contact Matsushita Electric Corporation of America at DIAL TOLL FREE 1-800-LAP-
TOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may re-
quest that you disconnect the equipment until the problem is resolved. 7. There are no user serviceable parts contained in this equipment. 8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine un-
less such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to pro-
gram this information into your fax software, you should re-
fer to the manual of the Fax software being used. d e t r a t S g n i t t e G 3 Read Me First 10.According to the FCCs electrical safety advisory, we recom-
mend that you may install an AC surge arrestor in the AC out-
let to which this equipment is connected. Telephone compa-
nies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide prob-
lem. Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-
munication line cord. ATTENTION: Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure. For Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT ATTACHMENT LIMITATIONS NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device. d e t r a t S g n i t t e G 4 Notice for the products using LCD This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some compo-
nents. Disposal of these materials may be regulated in your com-
munity due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>
RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identifie le matriel homologu. Cette tiquette certifie que le matriel est conforme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences tech-
niques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise lo-
cale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est possible que la conformit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situations. Les rparations de matriel homologu doivent tre coordonnes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutilisateur de dbrancher un appareil la suite de rparations ou de modifications effectues par lutilisateur ou cause de mauvais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les fils de mise la terre de la source dnergie lectrique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est particulirement importante dans les rgions rurales. Avertissement: Lutilisateur ne doit pas tenter de faire ces raccordements lui-mme; il doit avoir recours un ser-
vice dinspection des installations lectriques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface. La terminaison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condi-
tion que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur For Europe Declaration of Conformity (DoC) Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our web address: http://doc.panasonic-tc.de Network connection. The terminal equipment is intended for connection to the following public network;
In all the countries of European Economical Area;
- Public Switched Telephony Networks Technical Features. The terminal equipment includes the following features;
- DTMF dialing
- Maximum bitrate receiving mode: 56 kbits/s
- Maximum bitrate sending mode: 33.6 kbit/s This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Swe-
den, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria. Declaration of Conformity (DoC) Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:
If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our web address: http:/
/doc.panasonic-tc.de
Compliance Notice - CE Mark This equipment is in conformance with the requirements of the European Council Directive listed below:
73/23/EEC Low Voltage Directive with amendment 93/68/EEC 89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC 1999/5/EC
d e t r a t S g n i t t e G 5 Read Me First Important Safety Instructions / Importantes Mesures De Scurit When using your telephone equipment, basic safety pre-
cautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the fol-
lowing:
1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Certaines mesures de scurit doivent tre prises pendant l'utilisation de matrial tlphonique afin de rduire les risques d'incendie, de choc lectrique et de blessures. En voici quelquesunes:
1.Ne pas utiliser l'appareil prs de l'eau, p.ex., prs d'une baignoire, d'un lavabo, d'un vier de cuisine, d'un bac laver, dans un sous-sol humide ou prs d'une piscine. 2.Avoid using a telephone (other than a cordless type) dur-
ing an electrical storm. There may be a remote risk of electric shock from lightning. 3.Do not use the telephone to report a gas leak in the vicin-
ity of the leak. 4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special dis-
posal instructions. 2.viter d'utiliser le tlphone (sauf s'il s'agit d'un appareil sans fil) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3.Ne pas utiliser l'appareil tlphonique pour signaler une fuite de gaz s'il est situ prs de la fuite. 4.Utiliser seulement le cordon d'alimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux rglements pertinents quant l'limination des piles. SAVE THESE INSTRUCTIONS CONSERVER CES INSTRUCTIONS Information to the User Lithium Battery Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or mis-
application may possibly occur. Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes comme la date et l'heure notamment. Elle ne devra tre remplace que par un technicien qualifi. Avertissement! Risque d'explosion en cas de non respect de cette mise en garde!
This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this prod-
uct however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we be-
lieve this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific com-
munity and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible rep-
resentatives of the organization. These situations may for ex-
ample include:
Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wire-
less devices in a specific organization or environment (e.g. air-
ports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The cor-
rection of interference caused by such unauthorized modifica-
tion will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. d e t r a t S g n i t t e G 6 Precautions Precautions (Battery Pack) The CF-29 was developed based on thorough research into the real-world portable computing environments. Exhaustive pur-
suit of usability and reliability under harsh conditions led to in-
novations such has the magnesium alloy exterior, vibration damped hard disk drive and floppy disk drive, flexible internal connections. The CF-29s outstanding engineering has been tested using the stiff MIL-STD- 810F (for vibration and shock) and IP (for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid any damage. The following usage and handling procedures are recommended. Before putting the computer away, be sure to wipe off any mois-
ture. Avoid Radio Frequency Interference Do not place the computer near a television or radio receiver. Avoiding low-temperature burns Avoid more than casual contact with any heat pro-
ducing area of the notebook computer, AC adap-
tor, and any option or accessory you use with it. Even low heat, if warmer than body temperature, can cause a burn, if the skin is exposed to the heat source for a long enough period of time. Avoid Magnetic Fields Keep the computer away from magnets. Data stored on the hard disk may be lost. Keep Small Objects Away Do not insert paper clips or other small objects into the computer. Do Not Disassemble the Computer Do not attempt to disassemble your computer. Avoid Excessive Force on the Display Do not apply excessive downward force on the display when it is completely opened, especially when plugs and/or cables are connected to the rear of the computer. Care should be exercised with regard to the following in or-
der to avoid the possibility of overheating, fire or damage. Avoid Heat Do not throw the battery pack into a fire or ex-
pose it to excessive heat. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or stor-
ing. Do Not Disassemble Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it. Do Not Short Do not short the positive (+) and negative (-) con-
tacts. Avoid Extreme Heat, Cold and Direct Sunlight Do not charge, use or leave the battery pack for ex-
tended periods where it will be exposed to direct sunlight, in a hot place (in an automobile on a sunny day, for example), or in a cold place. Do Not Use With Any Other Computer The battery pack is rechargeable and was intended for the specified computer or charger. Do not use it with a computer other than the one for which it was designed. Do Not Put into a Microwave Do not put the battery pack into a microwave oven or a pressurized chamber. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, remove it from the computer or charger and stop using it. Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet. d e t r a t S g n i t t e G 7 Read Me First Precautions (Battery Pack) If the battery pack will not be used for a long period of time
(a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. This computer prevents overcharging of the battery by re-
charging only when the remaining power is less than approx. 95% of capacity. The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE The battery pack may become warm during recharging or normal use. This is completely normal. Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 C to 50 C {32F to 122 F}). (
Bat-
tery Power) Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Re-
charging takes longer than usual when the temperature is 10 C {50 F} or below.) If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. This computer has a high temperature mode function that prevents the degradation of the battery in high tempera-
ture environments. (
Battery Power) If the high temperature mode is enabled in the Setup Utility
Setup Utility), a level of 100% in the [High Temperature] mode is about a level of 80% in the [Nor-
mal Temperature] mode. The battery pack is a consumable item. If the amount of time the computer can be run off a particular battery pack becomes dramatically shorter and repeated recharging do not restore its performance, the battery pack should be replaced with a new one. When transporting a spare battery inside a package, brief-
case, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. d e t r a t S g n i t t e G 8 Names and Functions of Parts The illustrations shown may differ from the actual physical appearances. Function Keys For information on the key combinations Key Combinations). available (
Keyboard Touch Pad page 19)
Power Switch Before using the computer for the first time, care-
fully read the [Limited Use License Agreement]. If you agree to the conditions, remove the seal. Hard Disk Drive
Hard Disk Drive) PC Card slots
PC Cards) LCD
(Only for models with touchscreen:
Touchscreen) d e t r a t S g n i t t e G Modem
Modem) DC-IN Jack DC IN 15.6V USB Devices) USB Port
Depending on the shape of the plug, some USB devices cannot be connected to the USB port. In this case, use a commercially-available USB ex-
tension cable. LAN
LAN) CAUTION Do not connect the modem telephone cable into the LAN port. Wireless LAN Antenna
Wireless LAN) LED Indicators
LED Indicators) Caps lock Numeric key lock (NumLk) Scroll lock (ScrLk) Multimedia pocket device status Hard disk drive status Power status of the multimedia pocket LED Indicators) LED Indicators
Battery pack status Power status Carrying Handle For enhanced portability and in-the-field efficiency. Multimedia Pocket (Floppy Disk Drive)
Multimedia Pocket) Battery Pack
Battery Power) A lithium ion battery that is recyclable powers the product you have pur-
chased. Please call 1-
800-8-BATTERY for in-
formation on how to re-
cycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-
800-8-BATTERY. 9 Names and Functions of Parts Headphone Jack Use this connector to connect headphones or amplifier-
equipped speakers. Audio out-
put from the internal speaker is disabled when headphones or external speakers are connected. External Keyboard/Mouse Port External Display Port
External Display) Parallel Port Serial Port Expansion Bus Connector
Port Replicator) d e t r a t S g n i t t e G LOCK Security Lock A cable can be connected to prevent theft of your computer. For more information, read the manual that comes with the cable. Microphone Jack Use only a monaural condenser microphone (miniature jack). Using an input source other than a monaural condenser microphone may not allow audio to be input or may damage the equipment. NOTE When using a external microphone, do not remove the check mark for Mute under Microphone Balance of the Volume Control dialog box and do not increase the playback volume. Howling may result. Howling may occur in the same way when disconnecting an external microphone. (The microphone of Volume Control is in the state of mute at the time of factory shipment. This is not shown at the time of factory shipment.) External Antenna Connector The external antenna connector is for use as an exten-
sion in the future. CAUTION FCC RF Exposure Warning:
This transmitter must not be co-located or oper-
ated in conjunction with any other antenna or transmitter. Optional Port Replicator contains TNC connec-
tor for external mounted antenna. Employed an-
tenna cannot exceed 7 dBi antenna gain and must be professionally installed. Also, must maintain minimum 20 cm spacing between external an-
tenna and all persons body during wireless mode of operation. RAM Module Slot
RAM Module) 10 Speaker To adjust the volume:
Fn + F5 / Fn + F6 Speaker on/off : Fn + F4 CAUTION Do not allow metallic objects or magnetic me-
dia to come in close proximity to the speaker on the bottom surface of the computer. Because the speaker contains a magnet, metal objects may become attached to the bottom surface of the computer. This may cause the computer to be unstable, or may mark the sur-
face of the desk on which it is sitting. If floppy disks, magnetic memory cards, or other magnetic media approach the speaker, there is a risk that data will be destroyed. First-time Operation Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations. 1 Confirm the inclusion of all parts. Make sure the parts shown in the figure have been supplied. If any of these items are missing or are not working properly, contact Panasonic Technical Support. AC Adaptor ............................... 1 AC Cord ..................................... 1 Model No : CF-AA1653A Battery Pack.............................. 1 Modem Telephone Cable .......... 1 Model No : CF-VZSU29 Operating Instructions (This book)*1.......................................................... 1 Windows Book ...................................................................................... 1 Product Recovery CD-ROM Windows XP ............................................................................................ 3 Windows 2000 ......................................................................................... 2
<Only for models with touchscreen>
Soft Cloth .................................. 1 Stylus ..................................... 1
*1If additional instructions are included with the computer, be sure to read them. It may be neces-
sary to perform additional operations during the following procedures.
Touchscreen) 2 Read the LIMITED USE LICENSE AGREEMENT. (
Before removing the seal covering the power switch, read the LIMITED USE LICENSE AGREEMENT. page 32) 3 Insert the battery pack. 1 Unlock the cover by sliding the latch to the right. 2 Slide the latch down, and then without releasing it, open the cover as illustrated. Latch Cover d e t r a t S g n i t t e G 11 First-time Operation 3 Slide the battery pack inward until it is firmly in place. CAUTION Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly. Be sure to insert the battery pack as illustrated. 4 Close the cover, then lock it by sliding the latch to the left. CAUTION Confirm that the latch lock is correctly in place. If you carry your computer without the latch lock in place, the battery pack may fall out. Before using the battery pack, carefully read Precautions (Battery Pack)
page 7-8). 4 Connect your computer to a power outlet. CAUTION Be sure the AC adaptor is connected until completing the first-time use opera-
tion. When using the computer for the first time, do not connect any peripheral de-
vice except the battery pack and AC adaptor to the computer. Handling the AC adaptor Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer. When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed. 5 Open the display. 1 Pull the carrying handle forward. 2 Press the latch as illustrated. 3 Lift up the latch and open the display. 6 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indi-
cator turns on before releasing it. CAUTION Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly. Do not slide the power switch repeatedly. Once the computer is powered off, you must wait at least ten seconds before powering it on again. 4 3 d e t r a t S g n i t t e G DC-IN Jack DC IN 15.6 V DC Plug Latch 3 2 1 Power Indicator Power Switch 12 7 Setup Windows. Moving the cursor ( ) or clicking buttons can be performed with the touch pad. NOTE The touchscreen does not work properly during the Windows setup.
<Only for models with XGA type LCD>
During the Windows setup procedure, the desktop will be displayed as a small screen in the center of the LCD. After the setup procedure is completed and the computer is restarted, the desktop will be displayed as a full screen. Windows XP CAUTION Do not press any keys or touch the touch pad until [Windows XP Professional Setup] is displayed. 1 At [Welcome to the Windows XP Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I dont accept this agreement], then select [Next]. NOTE If [I dont accept this agreement] is selected, the Windows setup will be aborted. Select settings for your region, then select [Next]. 3 4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next]. CAUTION Remember this password! If the password is forgotten, Windows cannot be operated. 6 Enter the correct date, time and time zone, then select [Next]. NOTE It may take two to three minutes until the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc. 7 At [Networking Settings], select [Typical settings], then select [Next]. 8 At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next]. The computer will restart. NOTE If Yes, make this computer a member of the following domain is selected, the following message may be displayed: [An invalid domain was specified. Would you like to proceed for now and try joining a domain later?]. In this case, select [Yes]. After selecting [Yes], the computer will restart automati-
cally, but sometimes the message [Windows is starting up] will remain on the screen, and windows will not start up. If this happens, hold Tab down while pressing Alt until [Network Identification Wizard] is displayed on top, and follow the instructions on the screen. 9 Enter your administrator password and select
. Wait until the hard disk drive indicator (
) has turned off. d e t r a t S g n i t t e G 13 First-time Operation Windows 2000 CAUTION Do not press any keys or touch the touch pad until [Windows 2000 Professional Setup] is displayed. 1 At [Welcome to the Windows 2000 Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I dont accept this agreement], then select [Next]. NOTE If [I dont accept this agreement] is selected, the Windows setup will be aborted. 3 Select settings for your region, then select [Next]. 4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next]. CAUTION Remember this password! If the password is forgotten, Windows cannot be operated. 6 Enter the correct date, time and time zone, then select [Next]. 7 At [Networking Settings], select [Typical settings], then select [Next]. 8 At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next]. The computer will restart. 9 At [Welcome to the Network Identification Wizard], select [Next]. 10 At [Users of This Computer], select [Users must enter a user name and password to use this computer], then select [Next]. 11 Select [Finish]. 12 Enter your administrator password and select [OK]. Wait until the hard disk drive indicator (
) has turned off. 8 <Only for models with touchscreen>
Calibrate the touchscreen. Windows XP 1 Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration]. 2 Touch the + mark on the calibration screen with the stylus (included) for about one second. second. 3 After the calibration procedure is executed (e.g., after the nine + marks are touched), the procedure ends when Enter is pressed. 4 Select [OK]. Windows 2000 1 Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration]. 2 Touch the + mark on the calibration screen with the stylus (included) for about one 3 After the calibration procedure is executed (e.g., after the nine + marks are touched), the procedure ends when Enter is pressed. 4 Select [OK]. d e t r a t S g n i t t e G 14 9 Windows XP Create a new account. 1 Select [Start] - [Control Panel] - [User Accounts] - [Create a new account]. 2 Enter a name for the new account, then select [Next]. 3 Select [Computer administrator], then select [Create Account]. 4 <When you want to create a password for the new account>
Select the new account you have created and select [Create a password]. Follow the instructions on the screen to create a password. 5 Select [Start] - [Turn Off Computer] - [Restart] to restart the computer. CAUTION Remember this password! If the password is forgotten, Windows cannot be oper-
ated. You can create a password reset disk beforehand (
below). NOTE When creating a new user account:
below), or conduct other If you make mail settings, create password reset disks (
related operations before creating the user account, you will be unable to use any previous mail history or settings. When you create the first new account, you can only select [Computer administrator]. Once a Computer Administrator account has been created, you can create additional limited user accounts. Note also that only the added user account will be displayed in the Welcome screen. The account for the administrator created during Windows setup will not be displayed. If you use the wireless LAN, be sure to refer to the Reference Manuals Wireless LAN. d e t r a t S g n i t t e G This concludes the first-time use operation guidelines. Information for Windows XP Depending on the Windows settings, installed applications, and drivers, menus and other displays may differ, or some functions (such as use of the password reset disk) may be inoperable. You can select Classic view for the Control Panel or select the Classic Start menu. You can also change the way a user logs on or off. The procedure in this manual uses the method of the Windows XP default setting (not Clas-
sic Start menu etc.). Resetting the password Windows XP has a function to reset a forgotten password. To use this function, you need to create a password reset disk beforehand following the steps below. 1 Select [Start] - [Control Panel] - [User Accounts]. 2 Select [Prevent a forgotten password] from the [Related Tasks] menu of the account you have logged on to and create a password reset disk following the on-screen instructions. Store the password reset disk in a safe place. Only the logon password for each account can be reset. The password set in the Setup Utility cannot be reset. 15 Starting Up/Shutting Down Starting Up Latch 3 2 1 1 Open the display. 1 Pull the carrying handle forward. 2 Press the latch as illustrated. 3 Lift up the latch and open the display. Power Indicator 2 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it. Power Switch CAUTION Under the condition that both the AC adaptor and the port replicator are not con-
nected, the power will not go on if the display is closed. While booting, avoid the following until the hard disk drive indicator (
turned off. Connecting or disconnecting the AC adaptor. Touching the power switch. Performing any keyboard, touch pad, touchscreen (only for models with touch-
screen), or external mouse operations. Closing the display. Once the computer is powered off, you must wait at least ten seconds before pow-
ering it on again. When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support.
) has NOTE When the power is turned on, sometimes the message Warming up the system is displayed or the battery indicator alternately blinks green and orange, and start-up takes longer than usual (a few minutes or more). This function is designed to prevent hard disk drive malfunctions that may occur at low temperatures. Please wait for the computer to start up. If [Enter Password] is displayed Enter your password*1 and press Enter . (
Security Measures) Enter Password [ ]
The correct password Three incorrect attempts or No password for about a minute
1Supervisor Password or User Password set in the Setup Utility (not the Windows password). Will Start Will Not Start
(Power off) When an application or file that was previously displayed appears on your screen The standby or hibernation mode has been set (
tions). Standby/Hibernation Func-
n o i t a r e p O 16 3 Log on to Windows.
) has turned off, select the user and
. Until the correct password is entered, the computer Windows XP After confirming that the hard disk drive indicator (
input the password, then select will not operate. Windows 2000 After confirming that the hard disk drive indicator (
) has turned off, input the user name and password, then select [OK]. Until the correct user name and password are entered, the computer will not operate. 4 Select your application. You are able to start working on your computer. NOTE The power saving function is factory set, so if there is no input from a key, the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the touchscreen
(only for models with touchscreen) or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hiber-
nation mode (
Standby/Hibernation Functions). The computer will re-
sume by sliding the power switch. Windows XP When switching to a different user with the Fast User Switching function, it may not be possible to set the settings of the display. In this case, log off all users, and try the operation once more. If the problem persists, restart the computer. n o i t a r e p O 17 Starting Up/Shutting Down Shutting Down (power off your computer) This procedure is for shutting down the computer without using the standby or hibernation function (
Standby/Hibernation Functions). 1 Save important data and close each application. 2 Windows XP Select [Start] - [Turn Off Computer]. Windows 2000 Select [Start] - [Shut Down]. 3 Windows XP Select [Turn Off]. Windows 2000 Select [Shut down], then select [OK]. Your computer will power off automatically. Restarting your computer (without shutting down) Windows XP Select [Restart]. Windows 2000 Select [Restart], then select [OK]. CAUTION Do not do the following during the shutdown/restart procedure. Connecting or disconnecting the AC adaptor. Touching the power switch. Performing any keyboard, touch pad, touchscreen (only for models with touch-
screen), or external mouse operations. Closing the display.
, U , and select [Turn Off] with NOTE To shut down using the keyboard, Windows XP Press Windows 2000 Press To quickly resume computer operation after shutting down, The standby or hibernation function is available (
Functions).
, U , and select [Shut down] with
, then press Enter .
, then press Enter . Standby/Hibernation 4 Close the display until the latch clicks into place. n o i t a r e p O 18 Touch Pad (Basic Operation) Work Surface Use the touch pad to move the cursor on the display and perform normal computer operations. For instructions on how to operate, refer to
"Touch Pad". CAUTION By design the touch pad is to be used with a finger tip only. Therefore, do not use any implement which causes damage on the work surface. Function Moving the Cursor Touch Pad Operation Move the tip of your finger lightly over the surface. Right Button Left Button Tapping/Clicking Double-Tapping/
Double-Clicking Dragging tapping double-tapping or or or clicking double-clicking Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. While holding down the button, moving your finger on the work surface. Handling the Touch Pad
). If a key combination such as Fn + F5 is used while the pad is being touched, the function of the key combination will not work. In addition, it is possible that control of the cursor will be lost and the cursor will not show proper movements. In such cases, the computer has to be restarted by using the keyboard (e.g., Do not place any object on the work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pen). Try to avoid having any harmful substances such as oil, come in contact with the touch pad. The cursor may not work properly in such cases. When the touch pad becomes dirty:
Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur-
face, e.g., discoloration. In addition, do not use commercially-available household clean-
ers and cosmetics, as they may contain components harmful to the surface. n o i t a r e p O 19 Reference Manual The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals can also be printed. The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works, and other useful information.
(Refer to the cover of this manual for a list of the main contents included.) Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away from your home or office. It also offers helpful explanations on how to use the touchscreen more effectively. (only for models with touchscreen) Opening the Reference Manual or Important Tips Reference Manual Windows XP Select [Reference Manual] in [Start]. Windows 2000 Select [Reference Manual] in [Start] - [Programs] - [Panasonic] -
[On-Line Manuals]. on the desktop. Important Tips Select Important Tips can also be accessed from the following menu. Windows XP Select [Important Tips] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals]. Windows 2000 Select [Important Tips] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]. When the Reference Manual or Important Tips is started up for the first time, the License Agree-
ment of the Acrobat Reader may be displayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips. Refer to Acrobat Reader Help to use the Acrobat Reader. NOTE Illustrations may be difficult to view depending on the magnification. If the illustration is too small, magnify the display. The characters in PDF files (such as the Reference Manual) may be difficult to read depending on the Acrobat Reader settings and the Windows Desktop settings. In such cases, change the Acrobat Reader settings with the following procedure. 1 Start up Acrobat Reader. 2 Select [Edit] - [Preferences] - [Accessibility], and then set [Color Scheme] to [Use colors specified in document]. When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size. If a printer is connected, we recommend printing pages. The illustrations and display samples may not print with a high quality. n o i t a r e p O 20 Useful Information Usage Environment Environment In use:
Temperature: 5 C to 35 C {41 F to 95 F}
Humidity : 30% to 80% RH (No condensation) Not in use: Temperature: -20 C to 60 C {-4 F to 140 F}
Humidity : 30% to 90% RH (No condensation) NOTE Only use the computer within the allowable temperature range. When the computer is left powered on in a low temperature environment, set [Turn off hard disks] to [Never] in the following menu to avoid damage to the hard disk drive. Windows XP
[Start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]
Places not to use your computer Such areas may result in damage to the computer. Areas with electronic equipment These areas may interfere with your display or cause your computer to produce strange sounds. Areas with extremely high/low temperatures Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm. Handling This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling. Do not drop or hit your computer against solid objects. Do not carry your computer when it is on. Remove all external devices, cables, and PC Cards sticking out of the computer (see the figure on the left) before transporting the computer. We recommend preparing a fully charged battery (and optional charger, if possible). When transporting spare batteries inside a package, briefcase, etc., it is recommended that the batteries be stored in a plastic bag. Do not place the computer upright or allow it to tip over. When the computer receives extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable. Do not carry the computer while the display is open, or carry it by gripping the display. Do not put anything (e.g., a piece of paper) between the display and keyboard. Always carry your computer with you when traveling. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue. It is a good idea to make backup copies on disks and carry them with you. Do not leave a disk in the drive while transporting your computer. n o i t a r e p O 21 Useful Information Maintenance Touch Pad page 19 Display
<Models with touchscreen>
Use the Soft Cloth included with the computer. (For more information, refer to Suggestions About Cleaning the LCD Surface that come with the Soft Cloth.) If the Protective Film becomes dirty or damaged, it may be time to replace your Protective Film. The Protective Film is a disposable item. To find out the model number of your Protec-
tive Film, contact Panasonic Technical Support. (For more information, refer to the Operating Instructions that come with the Protective Film.) CAUTION Do not touch or use a touchscreen before you re-attach a Protective Film, as you may leave a mark or a scratch on the touchscreen.
<Models without touchscreen>
Avoid using water when cleaning the panel. Ingredients included in water may leave residue and reduce readability of the screen.
<When cleaning dust/dirt>
Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen. Sweep dust/dirt with fine brush, then wipe it with dry soft cloth used for cleaning glasses.
<When cleaning oily surface>
Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with dry soft cloth used for cleaning glasses. Areas excluding the display Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water. CAUTION Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur-
face, e.g., discoloration. In addition, do not use commercially-available household clean-
ers and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the com-
puter, it may cause it to work improperly or be damaged. Saving Data on the Hard Disk
) is on. Do not expose your computer to shock. Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power off your computer while software applications are running or hard disk drive indica-
tor (
Properly shut Windows down to avoid problems. Save all valuable data to floppy disks, etc. Backing up data to floppy disks, etc. will limit damage should trouble occur to your com-
puter or should you inadvertently change or erase data. Use the security function for all important data. (
Security Measures) Hard Disk Lock When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read and write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee complete protection of data.) (
"Security Measures") n o i t a r e p O 22 Saving Data on Floppy Disks Write-protect Tab Write Enable Write Disable Computer Viruses
) is on. Do not power down your computer or press the disk eject button while the MP indica-
tor (
Doing so may damage the data on the floppy disk and render the floppy disk useless. Use care when handling floppy disks. To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your computer, avoid the following:
Sliding the shutter on the floppy disk manually. Exposing the floppy disk to a magnetic field. Storing the floppy disk in locations prone to high temperatures, low pitched noise, damp-
ness, or dust. Applying more than one label on the floppy disk. Confirm the contents of a floppy disk before formatting it. Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased. Use the write-protect tab. This is a must for preserving important data. This prevents your data from being erased or over-
written. Users are advised to purchase the latest versions of virus protection software and use them regularly. We recommend you run the software:
After booting your computer. After receiving data. We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check). When Using Peripheral Devices Pay strict attention to the following points to avoid damage to the computer, peripheral de-
vices, cables, etc. Also, in addition to following this manual and the Reference Manual, care-
fully read the instruction manuals for the peripheral devices being used. Use only peripheral devices that conform to the computers specifications. Connect the devices properly, paying close attention to the condition and position of the connectors. If a connection cannot be made easily, do not apply undue force; check once more to con-
firm the condition and position of the connector (alignment of pins, etc.) . If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully. Wireless LAN To prevent theft of data or unauthorized access to the hard disk via a wireless LAN. If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption. n o i t a r e p O 23 Useful Information Windows Update You can use the latest patches and service packs for Windows with the following menus. Do not apply "Driver Update" even if a message to update a driver appears. If a driver update is required, contact to Panasonic Technical Support. Windows XP
[Start] - [All programs] - [Windows Update]
Windows 2000
[Start] - [Windows Update]
When Changing Hard Disk Partitions When using the hard disk backup function (
page 34), do not divide up the hard disk before creating a backup region. If you do this, the backup region cannot be created. Divide into the partition when the backup region is created. When Disposing of or Transferring Ownership of This Device When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility (included) (
page 38). (Note that this hard disk data erase utility does not guarantee that data will be completely erased.) Also, note that if you transfer ownership of this device without deleting commercial soft-
ware that you have installed to the hard disk, you may be in violation of the licensing agreement for that software. A Characteristic of Transflective Display (Only for models with 12.1 SVGA type LCD) Immediately after the computer is turned off or enters the standby mode, you may notice a black pattern appearing temporarily at the edges of the display. This is a characteristic of the transflective display and is not a malfunction. n o i t a r e p O 24 List of Error Codes When turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below. If the problem persists, or if the error code or message displayed is not shown here, contact Panasonic Technical Support. Error Code/Message Invalid system disk. Replace the disk, and then press any key 0200: Failure Fixed Disk 0211: Keyboard error 0251: System CMOS checksum bad - Default configuration used 0271: Check date and time set-
tings 0280: Previous boot incomplete
- Default configuration used 02B0: Diskette drive A error 0613: Serial Port*1 configura-
tion changed 0614: Serial Port*1 config. error
- device disabled
*1 The port name, such as A or B, is displayed, indicating the con-
flicting ports. Press <F1> to resume, <F2> to Setup Operating System not found Action If a floppy disk is set in the floppy disk drive, remove the disk and press any key. If a device is connected to the USB port, disconnect the device, or run the Setup Utility and set [Legacy USB Support] in [Security] menu to [Disable]. Disconnect the hard disk drive and reconnect it again. Make sure the drive is secured correctly. If the second hard disk drive is inserted inside the multimedia pocket, remove the drive and reconnect it. Make sure the drive is secured correctly. If an external keyboard or mouse is connected, disconnect these devices. An error has occurred in the memory that stores the Setup Utility settings. This error occurs when the memory content is changed through some inadvertent operation by a program or other function. Run the Setup Utility and load the default values, then change the settings to the appro-
priate values as needed. If the problem persists, the internal clock battery may need to be replaced. Contact Pana-
sonic Technical Support. The data and time setting are incorrect. Run the Setup Utility and set the date and time correctly. If the problem persists, the internal clock battery may need to be replaced. Contact Pana-
sonic Technical Support. Startup has failed repeatedly, so the Setup Utility settings have been returned to their default values, and the computer has been restarted. Run the Setup Utility and load the default values, then change the settings to the appropri-
ate values as needed. Disconnect the floppy disk drive and reconnect it. Make sure the drive is secured cor-
rectly. I/O address and IRQ settings are in conflict. Run the Setup Utility and change the settings in [Advanced] menu so there is no port conflicts. Write down the error details and press F2 to run the Setup Utility. Confirm the settings, and change the settings to the appropriate values as needed. The OS is not properly installed on the floppy disk or the hard disk that you are trying to boot from. If the computer cannot be booted from the floppy disk, make sure there are no non-
bootable floppy disks in the floppy disk drive. If the computer cannot be booted from the hard disk, perform the reinstallation proce-
dure. If the computer cannot be booted from the hard disk, disconnect the hard disk drive and reconnect it again. If the problem persists, perform the reinstallation procedure. If a device is connected to the USB port, disconnect the device, or run the Setup Utility and set [Legacy USB Support] in [Security] menu to [Disable]. g n i t o o h s e l b u o r T 25 Dealing with Problems (Summary) When a problem occurs, refer to this page. The Reference Manual also contains detailed information. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic Technical Support. You can use the PC Information Viewer to check the computers usage status. (
Dealing with Problems (Advanced)) Starting Up The power indicator or bat-
tery indicator is not lit The computer does not op-
erate when a USB device is connected
[Enter Password] is dis-
played POST Startup Error(s) is displayed Windows startup, or an op-
eration is extremely slow The date and time are incor-
rect When resuming from the standby or hibernation mode, [Enter Password]
does not appear even if a password has been set in the Setup Utility When the administrator password is forgotten Check the cable connection for the AC adaptor. Check to see if a fully charged battery is properly installed. Remove the battery pack and disconnect the AC adaptor, then connect them again. The computer may not operate when certain USB devices are connected. Disconnect the USB device, or set [Legacy USB Support] to [Disable] in [Security] menu of the Setup Utility. Input your Supervisor Password or User Password. If you have forgotten it, contact Pa-
nasonic Technical Support. page 25 Press F9 in the Setup Utility (
Setup Utility). This will restore the Setup Utility's settings to their default values (except the password settings). Then, the Setup Utility must be run once again for you to input the appropriate operating environment settings. (The processing speed depends on the application software used, so this opera-
tion may not cause the processing speed to increase.) You can set the date and time using the following menu. Windows XP
[Start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Date/Time]
When the computer is connected to a LAN, confirm the date and time of the server. If you continue to experience problems, the internal battery maintaining the clock may need to be replaced. Contact Panasonic Technical Support. When the computer is connected to a LAN, confirm the date and time of the server. This computer will not correctly recognize the date and time starting from the year 2100 A.D. Even when a password has been set in the Setup Utility, [Enter Password] does not appear when the computer resumes from the standby or hibernation mode. If you want to use the security function when using the standby or hibernation mode, use the Windows password as follows:
Windows XP Select the account to change in [Start] - [Control Panel] - [User Accounts] and set the password, then add the check mark for [Prompt for password when computer resumes from standby] in [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced]. Windows 2000 Set the password in [Start] - [Settings] - [Control Panel] - [Users and Passwords], then add the check mark for [Prompt for password when computer goes off standby] in
[Control Panel] - [Power Options] - [Advanced]. Set the password again in the following procedure. Windows XP If you have created a password reset disk (
page 15 ), a message is displayed when you fail to correctly enter the password. Follow the messages instructions and set the password again by using the password reset disk. If you have not created a password reset disk, after reinstalling, setup Windows and then set the password again. Windows 2000 After reinstalling, setup Windows and then set the password again. g n i t o o h s e l b u o r T 26 Starting Up (continued) When the previous item is not the cause Press F9 in the Setup Utility (
Utilitys settings to their default values (except the password settings). Try removing all peripheral devices. Check a disk error using the following procedure. 1 Display [Local Disk(C:) Properties]. Setup Utility). This will restore the Setup Windows XP Select [Local Disk(C:)] with the right button in [Start] - [My Computer], and select
[Properties]. Windows 2000 Select [Local Disk(C:)] with the right button in [My Computer], and select [Properties]. 2 Select [Tools] - [Check Now]. 3 Select [Start] after selecting required items in [Check disk options]. At startup, hold down F8 when [Panasonic] boot screen disappears, and release your finger when the Windows Advanced Options Menu is displayed. Start the computer in Safe Mode, and confirm the details of the error. Display No display after powering on The power has not been turned off, but after a cer-
tain period of time, there is no display When the battery pack is used, the screen is darker than when the AC adaptor is connected An afterimage appears (e.g., green, red, and blue dots remain on the display) or there are dots not display-
ing the correct colors The external display no longer displays properly When there is no display to an external display, Check your cable connection to the external display. Confirm your display is powered on. Check the settings for your external display. The display destination may be set to the external display. Try changing the display destination by pressing Fn + F3 . If you want to switch the display destination repeatedly by pressing Fn + F3 , make sure that the display destination has switched completely each time before pressing Fn + F3 again. Press Fn + F2 and adjust the brightness. Has the computer been set to the power-saving mode?
To resume operation of your computer from the condition the power of the display is off
(for energy conservation purposes), press any key unrelated to the direct triggering of a selection, like Ctrl . To save power, your computer may have automatically entered the standby mode (power indicator blinks green) or hibernation mode (power indicator turns off). In such cases, slide the power switch. Press Fn + F2 and adjust the brightness. Note, however, that when the brightness is increased, the battery running time will become shorter. Brightness can be set to sepa-
rate levels for when the AC adaptor is connected and when it is disconnected. If an image is displayed for a prolonged period of time, an afterimage may appear. This is not a malfunction. The afterimage will disappear when a different screen is displayed. High-precision and advanced technologies are necessary in the production of color liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either fail to light or remain constantly lit (that is, more than 99.998% of elements are function-
ing properly), no defect is considered to exist. When an external display not compatible with the power saving mode is used with the computer, the display may not function correctly when the computer enters the power saving mode. In such cases, turn off the power to the external display. g n i t o o h s e l b u o r T 27 Dealing with Problems (Summary) Display (continued) During simultaneous dis-
play, the screen of the exter-
nal display becomes disor-
dered When an MPEG file is be-
ing played with Media Player, the display destina-
tion cannot be switched us-
ing Fn + F3 Shutting Down Windows cannot be shut down or restarted Battery Indicator The red indicator lights. The red indicator blinks The orange indicator blinks The green indicator blinks The battery indicator blinks green and orange alternately Try changing the display by pressing Fn + F3 . If you continue to experience problems, try changing the display in the following menu. Windows XP
[Start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics] -
[Devices]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Intel(R) Extreme Graphics] - [Devices]
The display destination cannot be switched while an MPEG file is playing. Stop playing the MPEG file before switching the display destination. If a USB device is connected, try removing it. The battery level is very low (the charge is approx. 9% or less). Connect the AC adaptor. You can use the computer when the battery indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on. Quickly save your data and power off your computer. Remove the battery pack and dis-
connect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. Possible failure in the battery pack or charging circuit. Battery cannot be recharged temporarily because the internal temperature of the battery pack is outside of the acceptable temperature range for recharging. Once the allowable range requirement is satisfied, charging begins automatically. Your computer can be used normally in this state. In high temperature mode, the battery pack is discharging to a level of 80%* in normal temperature mode. (
Battery Power) Do not remove the battery pack while the battery indicator is blinking green.
* A level of 80% in normal temperature mode is displayed as [100%] in high temperature mode. Warming up the system to prevent hard disk drive malfunctions at low temperature. Leave your computer as is. Once the allowable temperature range requirement is satisfied, your computer will start automatically. Connecting Peripherals The Serial Port B of the port replicator does not work Set [Serial Port B] to [Enable] in [Advanced] menu of the Setup Utility. Try setting [MP Serial Port] to [Disable] in [Advanced] menu of the Setup Utility. g n i t o o h s e l b u o r T 28 Touch Pad / Touchscreen (only for models with touchscreen) The cursor cannot be con-
trolled properly The cursor does not move in scrolling area of the touch pad Unable to input using the touch pad Unable to point correctly with the stylus included with the computer Unable to input by touching the display Reference Manual The Reference Manual is not displayed below).
, then press Enter ).
, U , and select [Restart] with If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard (Press If the computer does not respond to keyboard commands, read No response
When the Microsoft IntelliMouse Wheel mode or the original mode is set for the touch pad, only scroll operations are possible for the right part or bottom part of the touch pad. In this case, cursor operations are possible by using the work surface excluding the right part or bottom part. When no mode is set, the entire surface of the touch pad can be used for cursor operations. Has the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not be used. Has the touch pad driver been properly installed?
As a result of the physical characteristics of the Touchscreen, sometimes the position of the stylus does not match the position of the cursor on the screen. This is not a malfunc-
tion. Perform [Calibration] (
Has the Setup Utility been used to set [Touchscreen] to [Enable]?
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Has the touchscreen driver been properly installed?
page 14). Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [Start]
- [Run] to reinstall the program. When installing the program, do not change the instal-
lation destination folder. If the destination folder is changed, the Reference Manual can-
not be opened from the [Start] menu. Fast User Switching function Windows XP Some applications may not work properly When switching to a different user with the Fast User Switching function, the following problems may occur. Some applications may not work properly. Key combinations with the Fn key may not work. It may not be possible to set the settings of the display. The wireless LAN cannot be used. A serial mouse may not work. In this case, log off all users, and try the operation once more. If the problem persists, restart the computer. Others No response Press Ctrl + Shift + Esc to open Task Manager and close the software application which is not responding. After shutting down by sliding the power switch for more than four seconds, slide the power switch to power on and open the application again. If the program no longer works normally, delete the program using the following menu. Then reinstall the program. Windows XP Windows 2000 : [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
: [Start] - [Control Panel] - [Add or Remove Programs]
g n i t o o h s e l b u o r T 29 Reinstalling Software When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on your hard disk to another media or to an external hard disk before running the reinstallation procedure. The reinstallation procedure will return the computer to its original condition. Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost.
(This is not the case when Windows is reinstalled in the first partition.) If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure. Before Reinstallation Preparing Product Recovery CD-ROM (included) Panasonic CD drive (optional: Confirm the latest information on optional products in catalogs, etc.) Important Before the reinstallation procedure, remove all peripherals (except for the CD drive). Be sure the AC adaptor is connected until the reinstallation procedure is completed. Reinstalling 1 Turn off the computer and insert the CD drive into the multimedia pocket. (
Multimedia Pocket) 2 Turn on the computer, and press F2 while [Panasonic]
boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Pass-
word. 3 Write down all of the contents of the Setup Utility and then press F9 . At the confirmation message, select [Yes] and press Enter . 4 Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of the [Boot] menu. 5 Place the disc number one of the recovery CDs into the CD drive. 6 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been en-
abled. If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears, press Y . 7 Press 1 to execute [1.[Recovery]].
(You can cancel this operation by pressing 0 .) The License Agreement screen should appear. 8 Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!]. This screen should appear. Windows XP
Select a number
Reinstalling : Windows(R) XP Professional 1. Reinstall Windows to the whole HDD to factory default. 2. Make two partitions, for the operating system and data. And reinstall Windows to the operating system partition.
(All existing partitions on HDD will be lost.) 3. Reinstall Windows to the first partition. 0. Cancel
Windows 2000
Select a number
Reinstalling : Windows(R) 2000 Professional 1. Reinstall Windows to the whole HDD to factory default. 2. Make two partitions, for the operating system and data. And reinstall Windows to the operating system partition.
(All existing partitions on HDD will be lost.) 3. Reinstall Windows to the first partition. 0. Cancel
g n i t o o h s e l b u o r T 30 9 Make a selection from the menu. NOTE When [2] is selected, the hard disk backup func-
tion cannot be enabled because the hard disk has been divided into partitions. When selecting [2], enter the basic partition size for the operating system installation and press Enter .
(The data partition size is the remainder after subtract-
ing the basic partition size.) To select [3], the initial partition size must be 6 GB or more of the hard disk size. Reinstallation cannot be performed with a small partition size.
<When the hard disk backup function has been enabled>
If you select [1] or [2], the message [The Backup func-
tion has been enabled. If [Recovery] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears. In this case, press Y . If the message [Computer must be rebooted in order to execute [Recovery.]] appears, press R . 10 At the confirmation message , press Y . The operation of reinstallation for the hard disk starts au-
tomatically. (The operations take about 15 minutes.) CAUTION Do not interrupt the reinstallation procedure be-
fore completion, for example by turning off the computer or pressing Ctrl + Alt + Del , as this may prevent Windows from starting up, or may cause data to be lost so that the reinstallation pro-
cedure cannot be executed. When a message appears instructing you to insert the next CD, insert the recovery CD showing the next number in the sequence, and then select [OK]. If the message [The media does not contain the correct file] appears, select [OK]. A message will appear instructing you to insert the next CD. Confirm that the proper recovery CD has been in-
serted by opening the cover of the CD drive and then close the cover, then select [OK]. 11 After the reinstallation procedure completes, this screen should appear. Remove the recovery CD. Windows XP
[Recovery] is complete. Windows(R) XP Professional install wizard will start after reboot. Please Remove the Product Recovery CD-ROM, and press Ctrl + Alt + Del (Delete) to reboot.
Windows 2000
[Recovery] is complete. Windows(R) 2000 Professional install wizard will start after reboot. Please Remove the Product Recovery CD-ROM, and press Ctrl + Alt + Del (Delete) to reboot.
12 Restart the computer by pressing Ctrl + Alt +
Del and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Pass-
word. 13 Press F9 . At the confirmation message, select [Yes] and press Enter . (The Setup Utility settings will return to their default values. Even the security settings with the ex-
ception of the password(s) will return to their default values.) 14 Select [Exit] and then select [Save Current Values], then press Enter . At the confirmation message, select [Yes] and press Enter . 15 Turn the computer off by sliding the power switch. NOTE If additional instructions are included with the computer, be sure to read them. It may be necessary to perform additional operations during the following procedures. 16 Perform the first-time use operation (
- page 15 step 9 ). page 12 step 6 17 Run the Setup Utility and change the settings where nec-
essary.
<Changing the drive letter>
You can change the drive letter for the CD drive or hard disk drive by the following steps. Drive letters can only be changed when two or more parti-
tions have been created on the hard disk drive. The name of the C: drive cannot be changed. We recommend that you make these changes before in-
stalling applications. Windows XP 1 Select [Start] - [Control Panel] - [Performance and Mainte-
nance] - [Administrative Tools] - [Computer Management]. 2 Select [Disk Management] from [Storage]. 3 Right click on the partition of the hard disk or the name of the CD drive and select [Change Drive Letter and Paths...]. 4 Select [Change]. 5 Select [Assign the following drive letter] and select the new drive letter, and then select [OK]. 6 At the confirmation message, select [Yes]. Windows 2000 1 Select [Start] - [Settings] - [Control Panel] - [Administra-
tive Tools] - [Computer Management]. 2 Select [Disk Management] from [Storage]. 3 Right click on the partition of the hard disk or the name of the CD drive and select [Change Drive Letter and Path...]. 4 Select [Edit]. 5 Select [Assign a drive letter] and select the new drive let-
ter, and then select [OK]. 6 At the confirmation message, select [Yes]. g n i t o o h s e l b u o r T 31 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. B. C. D. E. F. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. You may use the Programs only on the single Product which was accompanied by the Programs. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-
TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-
MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-
TER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intel's proprietary rights in the product. i x d n e p p A 32 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles ci-
dessous. En utilisant les logiciels, vous vous engagez de manire dfinitive respecter les termes, clauses et condi-
tions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. B. C. D. E. F. MEI vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les Logiciels conformment aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algorithmes, concepts, dessins, configurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, la proprit et les droits resteront tous MEI ou leurs propritaires. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. Vous et vos employs ou agents tes requis de protger la confidentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de MEI. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documen-
tation les accompagnant pour quelque fin que ce soit, lexception dune (1) copie des Logiciels des fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. Vous ne pouvez retirer aucune marque de droits dauteur, marque de commerce ou autre ni aucune identifica-
tion de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modifier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dfinies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre commu-
nication entre nous, relativement lobjet du prsent contrat. i x d n e p p A 33 Hard Disk Backup Function The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk contents or restore backed up contents to their original locations. By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from opera-
tional errors or other factors. Also, you can back up or restore hard disk contents using this computer alone, without having to use other media or peripheral devices. At the time of purchase, the hard disk backup function is disabled. If you follow the procedure below to create a backup area, the hard disk backup function will be enabled, and you will be able to back up your data. Note, that once the backup function has been enabled, you will have to perform the reinstallation procedure to disable it again (
page 30). The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when the data is backed up or restored. Note that if an error occurs while data is being restored, whether as a result of an unexpected malfunc-
tion, incorrect operation, or other reason, the data in the hard disk (data before restoration) may be lost. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss of data) as a result of the use of this function. Preparing Product Recovery CD-ROM (included) Panasonic CD drive (optional: Confirm the latest information on optional products in catalogs, etc.) Before Using a Hard Disk Backup Function Disconnect or remove all peripheral devices (except for the CD drive), as the backup area may not be created properly while these devices are connected. Be sure the AC adaptor is connected to the computer. A backup area cannot be created if the hard disk is already divided into several partitions. Return the computer to its condition at the time of purchase (one partition only), and create the backup area. To divide the partition, make the selection when the backup area is created (
page 35 step 8). If the partition configuration is changed (partitions created, size changed, etc.) after the backup area has been created, it will no longer be possible to execute the backup function. To change the configuration, it is necessary to return the computer to its condition at the time of purchase, and then create the backup area again. The hard disk backup function will only work for the internal hard disk. This function does not work with an external hard disk or the second hard disk (optional). Backup and restore functions will not operate if the hard disk has been damaged. Do not use the NTFS file system compression function, as this may result in insufficient capacity of the backup area. If the hard disk malfunctions, it will be impossible to read the data stored on it. We recommend that you also back up important data to a location other than the hard disk (an external hard disk or other media). Execute a disk error check using the following procedure. 1 Display the [Local Disk(C:) properties]. Windows XP Select [Local Disk(C:)] with the right button in [Start] - [My Computer], and select [Properties]. Windows 2000 Select [Local Disk(C:)] with the right button in [My Computer], and select [Properties]. 2 Select [Check Now] from [Tools]. 3 In [Check Disk], select [Start] without adding a check mark beside any of the items. If a message is displayed indicating that there is an error in the disk, display [Check Disk], and add a check mark for [Automatically fix file system errors] and [Scan for and attempt recov-
ery of bad sectors], select [Start], and check for disk errors again. The hard disk backup function does not accommodate dynamic disks. Do not convert the hard disk to a dynamic disk. i x d n e p p A 34 NOTE Regarding backup area Requires availability of at least half of the entire hard disk. Without sufficient space available, the backup area cannot be created. When the backup area is created, the usable hard disk capacity will be reduced to less than half. The backup area cannot be accessed from Windows. For this reason, backed up data cannot be copied to CD-R or other removable disk media. When the hard disk backup function is executed, data in the backup area will be overwritten. If newly created or edited data is backed up later, data stored previously in the backup area will be lost. Create a Backup Area 1 Turn off the computer and insert the CD drive into the multimedia pocket. (
Multi-
media Pocket) 2 Turn the computer on, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will then start. If a password has been set, enter the Supervisor Password. You cannot register [Boot] menu with a User Password. 3 Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of the
[Boot] menu. 4 Place disk number one of the recovery CDs into the CD drive. 5 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart. If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User Password. This screen should appear.
Select a number
1. [ Recovery ] Reinstall Windows. 2. [ Erase HDD ] Erase the whole data on HDD for security. 3. [ Backup
] Enable the Backup function. 0. [ Cancel
] Cancel. 6 Press 3 to execute [3.Backup]. CAUTION When dividing the hard disk into partitions Do not execute [1. Recovery] to divide the hard disk into partitions. The hard disk backup function cannot be enabled after the hard disk has been partitioned. Use proce-
dure 8 to divide the hard disk. 7 At the confirmation message, press Y . 8 Select how to divide the hard disk from the menu.
<To create a backup area and enable the backup function without dividing the hard disk>
Select [1].
[At the time of purchase]
[After the backup area is created]
The usable hard disk area The backup area Can be accessed from Cannot be accessed Windows (One partition). from Windows. i x d n e p p A 35 Hard Disk Backup Function
<To create a backup area and divide hard disk into two partitions, for OS and data>
Select [2], enter the partition size (GB), and press Enter . You can cancel this operation by pressing 0 . The data partition size will be the maximum settable size less the number entered above. The maximum settable size will differ depending on models.
[At the time of purchase]
[After the backup area is created]
The usable hard disk area The backup area Can be accessed from Cannot be accessed Windows (Two partitions). from Windows. 9 When the confirmation message is displayed, press Y . The backup area is then created. 10 When the message [You must reboot in order to enable the Backup function] appears, remove the recovery CD, and press any key to restart the computer. The computer is restarted, then the backup process will begin. 11 When the message [[Backup] is complete] appears, press Ctrl + Alt + Del to restart the computer. CAUTION Do not press Ctrl + Alt + Del until the message is displayed. 12 A message will appear advising that a new device has been installed and that the computer must be restarted to enable the settings. Select [Yes] to restart the computer. NOTE The [Boot] menu in the Setup Utility is set to start up from the CD drive. Change this setting if necessary. The next time the backup or restore functions are executed, follow the procedure for [Back-
ing Up and Restoring Data] (
below). Backing Up and Restoring Data CAUTION Before executing the backup function, execute a disk error check (
Do not interrupt the backup or restore functions before completion, for example by turning off the power or pressing Ctrl + Alt + Del , as this may prevent Windows from starting up, or may cause data to be lost so that the backup and restore functions cannot be executed. page 34). 1 Turn the computer on, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will start up. If a password has been set, enter the Supervisor Password or the User Password. 2 Select [Exit] menu, then select [Hard Disk Backup / Restore] and press Enter . At the confirmation message, select [Yes] and press Enter . i x d n e p p A 36
(When dividing the hard disk into two partitions, select the backup method at next screen.) 3 Select the operation to be executed from the menu.
<To back up hard disk contents to the backup area>
1 Press 1 to execute [1. [Backup]]. 2 At the confirmation message, press Y . The backup process will begin.
<To restore backed up contents to the hard disk>
1 Press 2 to execute [2. [Restore]]. 2 At the confirmation message, press Y . The restore process will begin.
(When data is backed up in two partitions, select the restore method at next screen.) NOTE The time required to complete the backup or restore process differs depending on the data volume. 4 When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press Ctrl + Alt + Del to restart the computer. If the backup or restore process was interrupted before completion, for example if the power was turned off, execute the process again. When a new device is installed and a message appears advising that the computer must be restarted to enable the settings, select [Yes] to restart the computer. CAUTION When the hard disk backup function has been enabled, even if a commercial data erasing utility or similar software is used to erase all data from user-accessible area, the backed up data will not be erased. You can use the hard disk data erase utility included in this com-
puter (
page 38) to erase all data on the hard disk, including backed up data. Use this hard disk data erase utility before disposing of or transferring ownership of this computer. Occasionally, the message [#1805 cannot write image file] will be displayed, and the backup function will be interrupted. If this error occurs, execute the backup function again. After this, if the backup function is completed properly, then there is no problem in the hard disk. To disable the hard disk backup function Perform the reinstallation procedure. All data in the backup area and the hard disk will be erased. Conduct steps 1-8 for [Reinstalling Software] (
reinstallation at the screen for executing the reinstallation. When [1] is selected, the hard disk backup function can be disabled. When [2] is selected, the hard disk backup function can be disabled, but in this case, because the hard disk has been divided into partitions, the hard disk backup function cannot be re-enabled (
When [3] is selected, the hard disk backup function cannot be disabled. page 30). Select [1] or [2] to execute the page 24). i x d n e p p A 37 Hard Disk Data Erase Utility This computer is equipped with a utility for erasing hard disk data. When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data following the steps below. The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunctions or other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility. Preparing Product Recovery CD-ROM (included) Panasonic CD drive (optional: Confirm the latest information on optional products in catalogs, etc.) NOTE Be sure the AC adaptor is connected until the procedure is completed. This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks or the second hard disk (optional). This utility cannot erase data from damaged disk. This utility cannot erase data for specific partitions. After executing this utility, the computer cannot be booted from the hard disk. The backup area and the data in the backup area will be erased. 9 When [<<<Start Menu>>>] is displayed, press Enter . 10 The approximate time required for erasing data will be displayed. Press Space . 11 At the confirmation message, press Enter . The operation of erasing the hard disk starts.
(If necessary, the hard disk data erase operation can be cancelled after it has begun by pressing Ctrl + C . If the operation is cancelled before being completed, a part of data will not be erased.) 12 After the operation is complete:
Under normal conditions, the message [Hard disk data has been deleted.] will be displayed. If a problem occurred during the operation, an error mes-
sage will be displayed. 13 Remove the recovery CD, then turn off the computer by sliding the power switch. Procedure 1 Turn off the computer. 2 Insert the CD drive into the multimedia pocket.
Multimedia Pocket) 3 Turn the computer on, and press F2 while [Panasonic]
boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password. 4 Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of [Boot] menu. 5 Place the disc number one of the recovery CDs into the CD drive. 6 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been en-
abled. If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears, press Y . 7 Press 2 to execute [2. [Erase HDD]].
(You can cancel this operation by pressing 0 .)
<When the hard disk backup function has been enabled>
When the message [The Backup function has been en-
abled. If [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] ap-
pears, press When the message [Computer must be rebooted in order to execute [Erase HDD.]] appears, press R . Y . 8 At the confirmation message, press Y . i x d n e p p A 38 Specifications Main Specifications Model No. CPU L2 (Second) Cache Memory Memory
(Expandable to) Video Memory LCD Type Displayed Colors*3 External Display Hard Disk Drive Keyboard Floppy Disk Drive Slot PC Card Slot Allowable current
(total for two slots) RAM Module Slot*6 Interface Parallel Port External Display Port Serial Port Microphone Jack*7 Headphone Jack External Keyboard/Mouse Port Expansion Bus Connector USB Port Modem LAN Wireless LAN External Antenna Connector Pointing Device Sound CF-29CRKGZKM CF-29CRKGZDM CF-29CTKGZKM CF-29CTKGZDM Intel Pentium M Processor 1.2 GHz LV 1 MB 256 MB
(768 MB Max.) UMA (64 MB Max.)*1 13.3 XGA type (TFT) with Touchscreen 12.1 SVGA type (TFT)
( Tr a n s f le c t iv e * 2) w ith Touchscreen CF-29C3KGZKM CF-29C3KGZDM 13.3 XGA type (TFT) 2 5 6 / 6 5 5 3 6 / A p p r o x . 16,000,000 colors (640 x 480 dots/800 x 600 dots/
1024 x 768 dots) 2 5 6 / 6 5 5 3 6 / A p p r o x . 16,000,000 colors (640 x 480 dots/800 x 600 dots) 2 5 6 / 6 5 5 3 6 / A p p r o x . 16,000,000 colors (640 x 480 dots/800 x 600 dots/
1024 x 768 dots) 256/65536/Approx. 16,000,000 colors (640 x 480 dots/800 x 600 dots/1024 x 768 dots/1280 x 1024 dots/1600 x 1200 dots)*4 40 GB*5 87 keys 720 KB/1.44 MB (two-mode) Two Type I or Type II, or one Type III 3.3 V: 400 mA 5 V: 400 mA 200 pin, 2.5 V, SO-DIMM, DDR SDRAM, PC2100 Compliant Dsub 25-pin female Mini Dsub 15-pin female Dsub 9-pin male Miniature jack, 3.5 DIA Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW x 2 Mini DIN 6-pin female Dedicated 80-pin female 4-pin, USB 2.0 RJ-11 jack, Data: 56 kbps (V.92 & K56flex*8) FAX:14.4 kbps RJ-45 jack, IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX IEEE 802.11b compliant Frequency 2.4 GHz band Dedicated 50 coaxial connector Touch Pad Touchscreen (Anti-Reflection, Stylus (included) touch capable) WAVE and MIDI playback, Monaural Speaker (built in) Touch Pad
*1 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user.
*2 The Transflective LCD improves display under strong light by using the reflection of light as illumina-
tion in addition to the same backlight illumination as a general LCD. The light sensor works to sense strong light so that the Transflective LCD will not require backlight Sensor illumination, and to power off the backlight illumination to conserve energy.
*3 A 16,000,000 color display is achieved by using the dithering function. Windows XP : 256 color depth and the resolution of 640x480 are not supported.
*4 Maximum resolution depends on the specifications of the external display. Windows XP : 256 color depth and the resolution of 640x480 are not supported.
*5 1GB = 109 bytes
*6 Only a RAM card designed for PC2100 can be added.
*7 Use only a monaural condenser microphone.
*8 The settings for the K56flex modem need to be changed according to the AT command. i x d n e p p A 39 Specifications Main Specifications Model No. Battery Pack Operating Time*9 CF-29CTKGZKM CF-29CTKGZDM Li-ion 11.1 V, 6.6 Ah Main battery: Approx. 5 hours - 8.5 hours*10 (Approx. 7.5 hours*11*12) Main battery + Second battery: Approx. 8 hours - 14 hours*10 (Approx. 11 hours*11*13) CF-29CRKGZKM CF-29CRKGZDM CF-29C3KGZKM CF-29C3KGZDM Charging Time*9 Power On Main battery: Approx. 7 hours Main battery + Second battery: Approx. 11 hours Clock Battery AC Adaptor*14 Input Output Power Consumption*15 Environment In use Power Off Temperature Humidity Not in use Temperature Humidity Physical Dimensions (W x H x D) Weight (including the carrying handle) Main battery: Approx. 4 hours Main battery + Second battery: Approx. 7 hours Coin type lithium battery 3.0 V 100 V - 240 V AC, 50 Hz/60 Hz 15.6 V DC, 5.0 A Approx. 35 W*16 / Approx. 60 W (maximum when recharging in the ON state) 5 C to 35C {41 F to 95 F}
30% to 80% RH (No condensation)
-20 C to 60 C {-4 F to 140 F}
30% to 90% RH (No condensation) 302 mm x 63.5 mm x 273 mm
{11.9 " x 2.5 " x 10.7 "} (excluding protrusion) Approx. 3.60 kg {Approx. 7.94 lb.}
Approx. 3.47 kg
{Approx. 7.64 lb.}
*9 Varies depending on the usage conditions, CPU speed, etc.
*10 Measured using BatteryMarkTM Version 4.0.1 (LCD brightness: Maximum - Minimum)
*11 Measured using MobileMarkTM 2002 (OS: Windows XP, LCD brightness: 60 cd/m2
*12 Only for the Transflective LCD models: Approx. 6 hours
*13 Only for the Transflective LCD models: Approx. 9 hours
*14 <Only for North America>
The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compatible AC cord.
*15 Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is off. Approx. 1.5 W when the Wake up from LAN function has been enabled.
*16 Rated power consumption Software Model No. Operating System Utility Programs
*17 The Product Recovery CD-ROM is required. CF-29CTKGZKM/CF-29CRKGZKM CF-29C3KGZKM Microsoft Windows XP Professional with Service Pack1
(NTFS File System) CF-29CTKGZDM/CF-29CRKGZDM CF-29C3KGZDM Microsoft Windows 2000 Professional with Service Pack3
(NTFS File System) Setup Utility DMI Viewer Adobe Acrobat Reader Panasonic Hand Writing PC Information Viewer Hard Disk Backup Utility*17 Hard Disk Data Erase Utility*17 Intel PROSet WLAN Security Client Setup Utility DMI Viewer Adobe Acrobat Reader Panasonic Hand Writing PC Information Viewer Hard Disk Backup Utility*17 Hard Disk Data Erase Utility*17 Intel PROSet WLAN Security Client Intel SpeedStep technology Applet i x d n e p p A 40 LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for a period of one (1) year from the date of purchase. This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God. Limits and Exclusions:
There are no other express warranties except as listed below. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfac-
tion, then write to the Consumer Affairs Division at the address indicated below. SOFTWARE LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your require-
ments or that the operation of the Programs will be uninterrupted or error free. Panasonics entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishan-
dling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any Program. DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLI-
GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.
To obtain service or technical assistance within the continental U.S.A. and Alaska. DIAL TOLL FREE: 1-800-LAPTOP5 Correspondence requesting product information should be sent to: Panasonic Computer Solutions Company, 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 i x d n e p p A 41 LIMITED WARRANTY For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Period of Coverage Type of Failure Coverage Whole Product (except Batteries), AC adaptor and CD-ROM
(if factory installed) Three (3) Years from Date of Original End User Customer Purchase Defective Materials or Workmanship Batteries, CD-ROM (unless factory installed), Port Replicator, Extra Memory Modules and all other Peripherals, Options and Accessories One (1) Year from Date of Original End User Customer Purchase Defective Materials or Workmanship Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-
tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFT-
WARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-
TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. i x d n e p p A 42 Memo i x d n e p p A 43 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. Panasonic Computer Solutions Company, 50 Meadowlands Parkway, Panazip 2F-5, Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Secaucus, NJ 07094 Ontario L4W 2T3 2003 Matsushita Electric Industrial Co., LTD. All Rights Reserved. Printed in Japan FJ0803-2113 DFQX5414YA
1 2 | Users Manual Part 2 | Users Manual | 918.14 KiB | / December 04 2004 |
Supplementary Instructions for Wireless LAN This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the computer differs from that in the Operating Instructions. Your computer is equipped with Wireless LAN enabling you to communicate using radio frequencies. For U.S.A. Operating Instructions Read Replace the Federal Communications Commission Radio Frequency Interference Statement (
Me First) with the following. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC RF Exposure Warning:
This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body (exclud-
ing extremities of hands, wrist and feet) during wireless modes of operation.
This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra-
dio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) This product and your Health This product, like other radio devices, emits radio frequency elec-
tromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recom-
mendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representa-
tives of the organization. These situations may for example include:
Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of in-
terference caused by such unauthorized modification will be the re-
sponsibility of the user. We and its authorized resellers or distribu-
tors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. Specifications Wireless LAN module Data transfer rates Standards supported Transmission method Wireless channels used RF frequency band IEEE802.11g : 54 Mbps/48 Mbps/36 Mbps/24 Mbps/18 Mbps/12 Mbps/9 Mbps/6 Mbps
(automatically switched) IEEE802.11b : 11 Mbps/5.5 Mbps/2 Mbps/1 Mbps (automatically switched) IEEE802.11g/IEEE802.11b OFDM system, DSSS system Channels 1 to 11 2.412 GHz ~ 2.462 GHz Wireless LAN 3 If you use a wireless LAN, you can use a network without cable connections. CAUTION
Communication is performed through the wireless LAN antenna. Do not block the antenna area with your hand or otherwise interfere with the passage of the radio signals. NOTE
The communication speeds and distances differ depending on the devices that support the wireless LAN, the installation environment and other ambient conditions.
One characteristic of radio waves is that their transmission rate tends to drop as the communication distance increases. It is recommended that the devices supporting the wireless LAN be used in close vicinity to each other.
The rate may drop while a microwave oven is being used. Windows XP
Do not use the Fast User Switching function.
Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity.
If you intend to use the computer in the environments described above, turn the wireless Precautions LAN off using the following method:
or on the taskbar. 1 Double-click 2 Select your wireless LAN adaptor and select [General]. 3 Select [Off] for [Switch radio]. 4 Select [OK]. The icon will turn to
. Wireless LAN The Settings 4
To prevent theft of data or unauthorized access to the hard disk via a wireless LAN.
If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption.
We recommend turning the wireless LAN off when it is not used or out of range.
If you leave the wireless LAN on, the battery's operating time is shortened. To use the wireless LAN, set the profile using the following procedure. The settings will vary for different network environments depending on the network system being used. For more details, ask your system administrator or the person in charge of the network. CAUTION
Set profiles for each user using the following procedure. NOTE Windows XP
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes]. Windows 2000
After setting the profile, delete the profile displayed at the time of purchase (profile name: Default). 1 2 3 Double-click on the taskbar. Select your wireless LAN adapter and select [General]. Select [On] for [Switch radio]. Wireless LAN 4 5 Select [Networks] and select [Add]. 5 Enter the profile name and network name (SSID), and then make other necessary changes, then select [Next]. 6 Make necessary changes and select [Finish]. 7 NOTE Select [OK].
About WLAN Security Client WLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port Based Network Access Control protocol. Since the WLAN Security Client has already started when is displayed on the is not displayed, start up the WLAN Security taskbar, do not double-start it. If Client in the following menu. Windows XP Select [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager]. Windows 2000 Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].
For more information about how to use the WLAN Security Client, refer to [Help] in the menu bar or;
Windows XP Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel]. Windows 2000 Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel]. Check the Communication Status Select or on the taskbar to check the communication status. For more information about how to use the Intel PROSet, refer to [Help] in the menu bar. Wireless LAN If the function fails to operate correctly 6 Read the operating instructions for the access point carefully and check the settings.
The access point fails to be displayed in [Available Networks]
Select the profile you are using, and select [Advanced] in [Networks]. [Connect to ad hoc networks only] may have been selected in [Connection preference]. In this case, select
[Connect to infrastructure and ad hoc networks].
This computer uses channels 1 through 11*1. Check the channel being used.
*1 In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A "Channel"
refers to the individual frequency bandwidth divisions.
The access point cannot be accessed
The network key setting may not conform to the access point. Check the network key setting of the access point and, if necessary, set it again correctly.
Depending on the access point and settings, access may not be accepted unless the computer's MAC address is registered beforehand. In this case, check the computer's MAC address using the following procedure and register it according to the operating instructions of the access point. 1 Display [Command Prompt]. Windows XP Select [Start] - [All Programs] - [Accessories] - [Command Prompt]. Windows 2000 Select [Start] - [Programs] - [Accessories] - [Command Prompt]. 2 Input [ipconfig /all], and press Enter. 3 Make a note of the 12-digit string of alphanumerics displayed on "Physical Address" line on Wireless LAN side. Then input [exit], and press Enter.
The IP address of the access point is wrong
Following the operating instructions of the access point, set the IP address of the access point again correctly.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-04-12 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2004-04-12
|
||||
1 2 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 |
Newark, New Jersey 07102-5490
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ACJ
|
||||
1 2 | Equipment Product Code |
9TGCF-294
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B****** B******
|
||||
1 2 | Title |
Project Manager
|
||||
1 2 | Telephone Number |
201-3********
|
||||
1 2 | Fax Number |
201-3********
|
||||
1 2 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 2 | Name |
R**** O******
|
||||
1 2 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 |
Columbia, Maryland 21045
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
410-2********
|
||||
1 2 | Fax Number |
410-2********
|
||||
1 2 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Panasonic Toughbook w/ Intel WLAN & Alps Bluetooth | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 | Grant Comments | Power output is conducted. This device is authorized to operate with a specific computer as described in this filing and has ben tested for SAR compliance for portable configurations. This device must not be co-located or operating with any other antenna or transmitter except for the Bluetooth described in this filing. End-users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value is - Body-worn: 0.62 W/kg. | ||||
1 2 | Power output is conducted. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 | Name |
R**** O****
|
||||
1 2 | Telephone Number |
41029********
|
||||
1 2 | Fax Number |
41029********
|
||||
1 2 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC CE | 2412.00000000 | 2462.00000000 | 0.0560000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0182000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC