FCC ID: ACJ9TGCF-733 Panasonic Toughbook w/ Intel WLAN & Alps Bluetooth

 

Personal Computer OPERATING INSTRUCTIONS Model No. CF-73 Series Contents Getting Started Read Me First.................................................. 3 First-time Operation ...................................... 11 Reference Manual Read Me First Key Combinations LED Indicators Operation Starting Up/Shutting Down ............................ 16 Touch Pad ..................................................... 19 Reference Manual ......................................... 20 Reference Manual Touch Pad Touchscreen*

Standby/Hibernation Functions Security Measures Computing on the Road Battery Power Multimedia Pocket CD Drive PC Cards RAM Module Port Replicator Printer External Display USB Devices Modem LAN Wireless LAN Hard Disk Drive Setup Utility

* Only for models with touchscreen Troubleshooting List of Error Codes ......................................... 21 Dealing with Problems (Summary) ....................... 23 Reinstalling Software .................................... 27 Reference Manual Technical Information DMI Viewer List of Error Codes Dealing with Problems

(Advanced) Appendix LIMITED USE LICENSE AGREEMENT ........ 29 Hard Disk Data Erase Utility .......................... 31 WinDVD ..................................................... 32 Names and Functions of Parts ...................... 34 Specifications ................................................ 36 LIMITED WARRANTY ................................... 38 d e t r a t S g n i t t e G n o i t a r e p O g n i t o o h s e l b u o r T i x d n e p p A 2000 XP

[Additional Manual]

Reference Manual This manual can be accessed on your computer. Refer to page 20 on how to access the Reference Manual. Please read these instructions carefully before using this product and save this manual for future use. Customers Record Dealers Name Dealers Address Model No. *

Serial No. or Code No. Date of Purchase

* For the Model No., insert the 12 digit number (for example, CF-73E3KVXDM) located on the bottom of the computer. Introduction Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer. Illustrations and Terminology in this Manual NOTE provides a useful fact or helpful information. CAUTION indicates a condition that may result in minor or moderate injury. WARNING indicates a hazard that may result in moderate or serious injury. NOTE:

CAUTION:

WARNING:

Windows 2000 : Information for Microsoft Windows 2000 Professional users. Windows XP Enter :

Fn + F5 :

[Start] - [Run]: This illustration means to click [Start], then to click [Run].

(For some applications, you may need to double-click.)

: Information for Microsoft Windows XP Professional users. This illustration means to press the [Enter] key. This illustration means to press and hold the [Fn] key, then press the [F5] key.

Where to go for referred information. This illustration means to refer to the Reference Manual, which is available on your computer. Refer to page 20 on how to access this manual. Windows 2000 screens are used in this manual when no specific OS notes are required. Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. Circular media such as DVD-ROM and CD-ROM are described as discs. The following drives are described as CD drive. DVD-ROM drive, DVD-ROM & CD-R/RW drive This manual covers two types of models, as distinguished by the type of display (models with touchscreen and models without touchscreen). If the user has logged on without the administrator authority, some functions may not be executable, and some screens may not be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions. Confirm the latest information on optional products in catalogs, etc. Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks Microsoft, Windows, Windows NT and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Pentium and SpeedStep are either registered trademarks or trademarks of Intel Corporation. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. WinDVD is a trademark of InterVideo, Inc. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. d e t r a t S g n i t t e G 2 Read Me First For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra-

dio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC RF Exposure Warning: This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. G e t t i n g S t a r t e d FCC Regulation Notice for modem This equipment contains a FCC approved modem. Manufacturer of modem: PC TEL Inc. Model No. PCT2304WT Tested To Comply With FCC Standards FOR HOME OR OFFICE USE 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number

(REN) for this equipment. If required, this information must be provided to the telephone company. 2. An FCC compliant telephone cord and modular plug is pro-

vided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring us-

ing a compatible modular jack which is Part 68 compliant. See Installation Instructions for details. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. 4. If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 5. The telephone company may take changes in its facilities, equipment, operations or procedures that could affect the op-

eration of the equipment. If this happens the telephone com-

pany will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. 6. If trouble is experienced with this equipment, for repair or warranty information, please contact Matsushita Electric Corporation of America at DIAL TOLL FREE 1-800-LAP-

TOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. 7. There are no user serviceable parts contained in this equip-

8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is sub-

ject to state tariffs. 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine un-

less such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used. ment. 3 Read Me First 10.According to the FCCs electrical safety advisory, we recom-

mend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone com-

panies report that electrical surges, typically lightning tran-

sients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major na-

tionwide problem. Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom-

munication line cord. ATTENTION: Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure. For Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT ATTACHMENT LIMITATIONS NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer Notice for the products using LCD This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some compo-

nents. Disposal of these materials may be regulated in your com-

munity due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>

RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identifie le matriel homologu. Cette tiquette certifie que le matriel est conforme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise locale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est possible que la conformit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situations. Les rparations de matriel homologu doivent tre coordonnes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutilisateur de dbrancher un appareil la suite de rparations ou de modifications effectues par lutilisateur ou cause de mauvais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les fils de mise la terre de la source dnergie lectrique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est particulirement importante dans les rgions rurales. Avertissement: Lutilisateur ne doit pas tenter de faire ces raccordements lui-mme; il doit avoir recours un service dinspection des installations lectriques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface. La terminaison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condition que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. d e t r a t S g n i t t e G 4 Important Safety Instructions / Importantes Mesures De Scurit When using your telephone equipment, basic safety precau-

tions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2.Avoid using a telephone (other than a cordless type) dur-

ing an electrical storm. There may be a remote risk of electric shock from lightning. 3.Do not use the telephone to report a gas leak in the vicin-

ity of the leak. 4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special dis-

posal instructions. SAVE THESE INSTRUCTIONS Information to the User Certaines mesures de scurit doivent tre prises pendant lutilisation de matrial tlphonique afin de rduire les risques dincendie, de choc lectrique et de blessures. En voici quelquesunes:

1.Ne pas utiliser lappareil prs de leau, p.ex., prs dune baignoire, dun lavabo, dun vier de cuisine, dun bac laver, dans un sous-sol humide ou prs dune piscine. 2.viter dutiliser le tlphone (sauf sil sagit dun appareil sans fil) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3.Ne pas utiliser lappareil tlphonique pour signaler une fuite de gaz sil est situ prs de la fuite. 4.Utiliser seulement le cordon dalimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux rglements pertinents quant llimination des piles. CONSERVER CES INSTRUCTIONS G e t t i n g S t a r t e d This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 5 Read Me First Informations destines lutilisateur Cet appareil et votre sant Cet appareil, comme les autres dispositifs radio, met une nergie lectromagntique de frquence radio. Le niveau dnergie mis par cet appareil est cependant bien infrieur lnergie lectromagntique mise par certains dispositifs sans fil comme, par exemple, les tlphones portables. Cet appareil fonctionnant dans les limites des directives concernant les normes et recommandations de scurit des frquences radio, nous pensons que lutilisation de cet appareil ne pose aucun risque pour les consommateurs. Ces normes et recommandations refltent le consensus de la communaut scientifique et dcoulent des dlibrations de commissions et comits de scientifiques qui examinent continuellement et interprtent les documents de travaux approfondis. Dans certaines situations ou certains lieux, lutilisation de cet appareil peut tre restreinte par le propritaire du btiment ou les responsables de lorganisation. Par exemple, ces situations peuvent inclure :

Lutilisation de cet appareil bord dun avion, ou Dans un autre milieu o le risque dinterfrence avec dautres dispositifs ou services est peru ou identifi comme nuisible. Si vous ntes pas sr de la politique qui sapplique lutilisation de dispositifs sans fil dans une organisation ou lieu spcifique

(un aroport, par exemple), il est conseill de demander lautorisation dutiliser cet appareil avant de le mettre sous tension. Informations sur la rglementation Nous ne serons pas tenus responsables de parasites radiolectriques ou de tlvision provoqus par une modification non autorise de cet appareil. La rectification des parasites provoqus par une telle modification non autorise sera la responsabilit de lutilisateur. Nous, et les revendeurs ou distributeurs mandats de lappareil ne seront pas tenus responsables de dommages ou violations de rglements gouvernementaux qui peuvent se produire du fait du non respect de ces directives. d e t r a t S g n i t t e G 6 Lithium Battery Precautions Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or mis-

application may possibly occur. Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes comme la date et lheure notamment. Elle ne devra tre remplace que par un technicien qualifi. Avertissement! Risque dexplosion en cas de non respect de cette mise en garde!

CD Drive Caution CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER. LUTILISATION DE COMMANDES OU DE RGLAGES OU LEXCUTION DE PROCDURES AUTRES QUE CELLES SPCIFIES ICI PEUVENT PROVOQUER UNE EXPOSITION DES RADIATIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RPARER SOI-MME. CONFIER TOUT TRAVAIL D'ENTRETIEN UN PERSONNEL QUALIFI. Bottom CLASS 1 LASER PRODUCT LASER KLASSE1 Laser safety information is appropriate only when drive with laser is installed. Les mesures de scurit relatives au laser ne sappliquent que lors de linstallation dune unit avec laser. This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling. Before putting the computer away, be sure to wipe off any moisture. Usage G e t t i n g S t a r t e d

-20 oC to 60 oC {-4 oF to 140 oF}

Avoid Extreme Heat and Cold Do not store or use the computer in locations exposed to heat, direct sunlight, or extreme cold. Avoid moving the computer between locations with large temperature difference. Operation: 5 oC to 35 oC {41 oF to 95 oF}

Storage:

Avoid Direct Sunlight on the LCD Panel The LCD panel should not be exposed to direct sunlight or ultraviolet light. Avoid Humidity, Liquids and Dust Do not store or use the computer in locations exposed to high humidity, liquids (including rain) or dust. Prevent Shock Avoid subjecting the computer to severe vibrations or impact. Do not place the computer inside a car trunk. Avoid Radio Frequency Interference Do not place the computer near a television or ra-

dio receiver. Avoiding low-temperature burns Avoid more than casual contact with any heat pro-

ducing area of the notebook computer, AC adap-

tor, and any option or accessory you use with it. Even low heat, if warmer than body temperature, can cause a burn, if the skin is exposed to the heat source for a long enough period of time. Handling Avoid Magnetic Fields Keep the computer away from magnets. Data stored on the hard disk may be lost. Avoid Stacking Do not place heavy objects on top of the computer. Keep Small Objects Away Do not insert paper clips or other small objects into the computer. Do Not Disassemble the Computer Do not attempt to disassemble your computer. Avoid Excessive Force on the Display Do not apply excessive downward force on the display when it is completely opened, especially when plugs and/or cables are connected to the rear of the computer. 7 Read Me First Peripherals Incorrectly using peripheral devices may lead to a decrease in performance, an increase in temperature and/or damage your computer. For more information on peripheral devices, refer to the Reference Manual. Precautions (Battery Pack) Care should be exercised with regard to the following in order to avoid the possibility of overheating, fire or damage. Avoid Heat Do not throw the battery pack into a fire or ex-

pose it to excessive heat. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or stor-

ing. Do Not Disassemble Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it. Do Not Short Do not short the positive (+) and negative (-) con-

tacts. Avoid Extreme Heat, Cold and Direct Sunlight Do not charge, use or leave the battery pack for extended periods where it will be exposed to di-

rect sunlight, in a hot place (in a car on a sunny day, for example), or in a cold place. Do Not Use With Any Other Computer The battery pack is rechargeable and was intended for the specified computer. Do not use it with a computer other than the one for which it was de-

signed. Do Not Put into a Microwave Do not put the battery pack into a microwave oven or a pressurized chamber. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, re-

move it from the computer and stop using it. Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to be-

come wet. d e t r a t S g n i t t e G 8 Cables Use of an interface cable longer than 3 m (9.84 feet) is not recommended. If the battery pack will not be used for a long period of time

(a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. This computer prevents overcharging of the battery by re-

charging only when the remaining power is less than approx. 95% of capacity. The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE The battery pack may become warm during recharging or normal use. This is completely normal. Recharging will not commence outside of the allowable temperature range (0 C to 50 C {32 F to 131 F}).

Battery Power) Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50 F} or less.) If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable tem-

perature range. This computer has a high temperature mode function that prevents the degradation of the main battery in high temperature environments. If the high temperature mode is enabled in the Setup Utility (

Setup Util-

ity), a level of 100% in the [High Temperature] mode is about a level of 80% in the [Normal Temperature]

mode. The battery pack is a consumable item. If the amount of time the computer can be run off a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one. When transporting a spare battery inside a package, brief-

case, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. Saving Data on the Hard Disk Do not expose your computer to shock. Use care when handling your computer, shock may damage your hard disk or make your software applica-

tions and data unusable. Do not power off your computer while software applications are running or hard disk drive indicator (

Properly shut Windows* down to avoid problems. Save all valuable data to disks. Backing up data to disks will limit damage should trouble occur to your computer or should you inadvert-

ently change or erase data. Use the security function for all important data. (

Security Measures)

) is on.

* Windows 2000 Windows XP

: This computer uses Microsoft Windows 2000 Professional.

: This computer uses Microsoft Windows XP Professional. Hard Disk Lock When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read/write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee the complete protection of data. Security Measures) G e t t i n g S t a r t e d When Using Peripheral Devices Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc. Also, in addition to following this manual and the Reference Manual, carefully read the instruction manuals for the peripheral devices being used. Use only peripheral devices that conform to the computers specifications. Connect the devices properly, paying close attention to the condition and position of the connectors. If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc.) . If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully. When Disposing of or Transferring Ownership of This Device When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility (included) (

page 31). (Note that this hard disk data erase utility does not guarantee that data will be completely erased.) Also, note that if you transfer ownership of this device without deleting commercial software that you have installed to the hard disk, you may be in violation of the licensing agreement for that software. Computer Viruses Users are advised to purchase the latest versions of virus protection software and use them regularly. We recommend you run the software:

After booting your computer. After receiving data. We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check). Wireless LAN To prevent theft of data or unauthorized access to the hard disk via a wireless LAN If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption. 9 Read Me First Usage Environment Environment d e t r a t S g n i t t e G Handling Maintenance Touch Pad page 19 Place the computer on a flat stable surface. Do not place the computer upright or allow it to tip over. When the computer receives extremely strong shock after falling, the hard disk may become inoperable. In use:

Temperature: 5 C to 35 C {41 F to 95 F}

Humidity : 30% to 80% RH (No condensation) Not in use: Temperature: -20 C to 60 C {-4 F to 140 F}

Humidity : 30% to 90% RH (No condensation) Places not to use your computer Such areas may result in damage to the computer. Areas with electronic equipment These areas may interfere with your display or cause your computer to produce strange sounds. Areas with extremely high/low temperatures Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm. Do not drop or hit your computer against solid objects. Do not carry your computer when it is on. Remove all external devices, cables, and PC Cards sticking out of the computer (see the figure on the left) before transporting the computer. We recommend preparing a fully charged battery. When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. Do not carry the computer while the display is open, or carry it by gripping the display. Do not put anything (e.g., a piece of paper) between the display and keyboard. Always carry your computer with you. Never check it in with luggage. For use of the com-

puter inside an aircraft, we recommend asking the airlines regarding their policy on this issue. It is a good idea to make backup copies on disks and carry them with you. Do not leave a disk in the drive while transporting your computer. Display

<Models with touchscreen>

Use the soft cloth included with the computer. (For more information, refer to Suggestions About Cleaning the LCD Surface that comes with the soft cloth.)

<Models without touchscreen>

Avoid using water when cleaning the panel. Ingredients included in water may leave scratches and reduce readability of the screen.

<When cleaning dust/dirt>

Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen. Sweep dust/dirt with fine brush, then wipe it with a dry soft cloth used for cleaning glasses.

<When cleaning oily surface>

Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with a dry soft cloth used for cleaning glasses. Areas excluding the display Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water. CAUTION Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause it to work improp-

erly or be damaged. 10 First-time Operation Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations. 1 Confirm the inclusion of all parts Make sure the parts shown in the figure have been supplied. If any of these items are missing or is not working properly, contact Panasonic Technical Support. AC Adaptor ........... 1 AC Adaptor ........... 1 AC Cord ................1 AC Cord ................1 Battery Pack ........1 Battery Pack ........1 Model No: CF-AA1653A Modem Telephone Cable ..................... 1 Model No: CF-VZSU26 Product Recovery CD-ROM Windows 2000 Windows XP G e t t i n g S t a r t e d Operating Instructions (This book) ... 1 Windows Book ........................ 1

<Model with a DVD-ROM Drive>

WinDVD CD-ROM (

page 32) .....................................................1

<Model with a DVD-ROM & CD-R/RW Drive>

WinDVD CD-ROM (

page 32) .....................................................1 Bs Recorder/Bs CLiP CD-ROM .........................................................1 Bs Recorder/Bs CLiP Booklet ...........................................................1

<Only for models with touchscreen>

Soft Cloth ................................... 1 Stylus ......................................... 1

Touchscreen) 2 Read the LIMITED USE LICENSE AGREEMENT (

page 29) Before removing the seal covering the power switch, read the LIMITED USE LI-

CENSE AGREEMENT. Latch 2 1 3 Battery Pack 3 Turn the computer over and insert the battery pack 1 Slide the right latch to the unlock position (

2 Make sure the battery pack is facing the correct direction, slide it in the direction

). 3 Slide the right latch to the lock position (

), and then check to ensure that the of the arrow. battery pack is held firmly.

(Left latch is locked automatically.) CAUTION Be sure the battery pack is properly connected to the connector. Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly. Before using the battery pack, carefully read Precautions (Battery Pack)

page 8). 11 First-time Operation 4 Connect your computer to a power outlet The battery pack will be charged automatically. Charging Time: Approx. 3 hours

(Varies depending on the usage conditions.) DC-IN Jack DC IN 15.1-16.0 V CAUTION Be sure the AC adaptor is connected until completing Step 7. When using the computer for the first time, do not connect any peripheral de-

vice except the battery pack and AC adaptor to the computer. Handling the AC adaptor Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer. When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. Latch 3 2 1 5 Open the display 1 Pull the carrying handle forward. 2 Lift up the latch. 3 Lift open the display. Power Indicator 6 Turn your computer on Press the power switch and hold it for approximately one second until the power indi-

cator turns on before releasing it. CAUTION Do not press the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly. Do not press the power switch repeatedly. Once the computer is powered off, you must wait at least ten seconds before powering it on again. 7 Setup Windows Moving the cursor (

page 19). Windows 2000 CAUTION

) or clicking buttons can be performed with the touch pad Do not press any key or move the touch pad until [Windows 2000 Professional Setup] is displayed. 1 At the [Welcome to the Windows 2000 Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I dont accept this agreement], then select [Next]. NOTE If [I dont accept this agreement] is selected, the Windows setup will be aborted. d e t r a t S g n i t t e G 12 Power Switch 3 Select settings for your region, then select [Next]. 4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next]. CAUTION Remember this password! If the password is forgotten, Windows cannot be operated. 6 Enter the correct date, time and the time zone, then select [Next]. 7 At [Networking Settings], select [Typical settings], then select [Next]. 8 At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next]. The computer will restart. 9 At [Welcome to the Network Identification Wizard], select [Next]. 10 At [Users of This Computer], select [Users must enter a user name and pass-

word to use this computer], then select [Next]. 11 Select [Finish]. 12 Enter your administrator password and select [OK].

<Only for models with touchscreen>

If the cursor can not be pointed correctly with the stylus, perform [Calibration] in

[Start] - [Settings] - [Control Panel] - [Touch Panel]. G e t t i n g S t a r t e d Windows XP CAUTION Do not press any key or move the touch pad until [Windows XP Professional Setup] is displayed. 1 At [Welcome to the Windows XP Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I dont accept this agreement], then select [Next]. NOTE If [I dont accept this agreement] is selected, the Windows setup will be aborted. 3 Select settings for your region, then select [Next]. 4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next]. CAUTION Remember this password! If the password is forgotten, Windows cannot be operated. You can create a password reset disk beforehand (

page 15). 6 Enter the correct date, time and the time zone, then select [Next]. NOTE It may take about 2 - 3 minutes until the next screen is displayed. Wait, and do not press any keys, or touch the touch pad, etc. 7 At [Networking Settings], select [Typical settings], then select [Next]. 13 First-time Operation 8 At [Workgroup or Computer Domain], select [No, this computer is not on a network, or is on a network without a domain], then select [Next]. The computer will restart. 9 Enter your administrator password and select

<Only for models with touchscreen>

If the cursor can not be pointed correctly with the stylus, perform [Calibration] in

[Start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel]. NOTE If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes]. This concludes the first-time use operation guidelines. Create Backup Disks for Reinstallation 1 Windows 2000 Windows XP Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk]. Select [Start] - [All Programs] - [Panasonic] - [Create Backup Disk]. When [You do not need to make BACKUP DISK] is displayed, there is no need to create a backup disk. If this message is not displayed, create backup disks for reinstal-

lation. To create backup disks, the USB floppy disk drive (optional: CF-VFDU03) and format-

ted 2HD floppy disks are needed. 2 Connect the USB floppy disk drive to your computer. NOTE The floppy disk drive must be the A drive. 3 Prepare 2HD floppy disks and make sure they are not in the write-protected state, and then set it. Follow the on-screen instructions. 4 Place a label identifying the contents on each disk. Name of created backup disk FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the disk by following the on-screen instructions.) CAUTION Store the floppy disks in a safe place. They will enable you to return your computer to the condition at the time of purchase should any problems occur. When creating backup disks, do not run any other application program. When creating backup disks and the message [Insufficient files to copy] is dis-

played, select [OK] and then contact Panasonic Technical Support. While the floppy disk drive indicator is on, do not remove the floppy disk, power off your computer or use the standby or hibernation function (

Standby/

Hibernation Functions).

<When [You do not need to make BACKUP DISK] is not displayed (proce-

dure 1 above)>

Be sure to create the backup disk. If a backup disk is not created, it will be impossible to return the computer to its original state. In this case, contact Panasonic Technical Support. Label on the top surface, and insert the shutter-

side headfirst. USB Floppy Disk Drive d e t r a t S g n i t t e G 14 Information for Windows XP Depending on the Windows settings, installed applications, and drivers, menus and other displays may differ, or some functions (such as use of the password reset disk) may be inoperable. You can select Classic view for the Control Panel or select the Classic Start menu. You can also change the way a user logs on or off. The procedure in this manual uses the method or view of the Windows XP default setting (not Classic view or Classic Start menu etc.). Resetting the password Windows XP has a function to reset a forgotten password. To use this function, you need to create a password reset disk beforehand following the steps below. 1 Connect the USB floppy disk drive (optional: CF-VFDU03) to your computer. 2 Select [Start] - [Control Panel] - [User Accounts] and select the account you used to logon. 3 Select [Prevent a forgotten password] from the [Related Tasks] menu and create a password reset disk following the on-screen instructions. Store the password reset disk in a safe place. Only the logon password for each account can be reset. The password set in the Setup Utility cannot be reset. G e t t i n g S t a r t e d When you create the first new account, you can only select [Computer administrator]. Only the added user account will be displayed in the Welcome screen. The account for the administrator created during Windows setup (when the computer is started up for the first time) will not be displayed. 15 Starting Up/Shutting Down Starting Up Latch 3 2 1 Power Indicator 1 Open the display 1 Pull the carrying handle forward. 2 Lift up the latch. 3 Lift open the display. 2 Turn your computer on Press the power switch and hold it for approximately one second until the power indi-

cator turns on before releasing it. CAUTION While booting, avoid the following until the hard disk drive indicator (

turned off. Connecting or disconnecting the AC adaptor. Touching the power switch. Performing any keyboard, touch pad, touchscreen (only for models with

) has touchscreen) or external mouse operations. Closing the display. Once the computer is powered off, you must wait at least ten seconds before powering it on again. When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support. NOTE You may encounter the following situations when the computer is turned on at very low temperatures. These functions are designed to prevent hard disk drive malfunctions that may occur at low temperatures. The message Warming up the system is displayed, and start-up takes longer than usual (a few minutes or more). In this case, wait for the computer to start up. The power indicator will blink quickly (in green); in this case, the power does not turn on, or the computer does not resume from standby or hibernation mode. To start the computer, leave it in an environment with a temperature of 5C

{41F} or more for about an hour, and try turning the power on once more. Power Switch n o i t a r e p O 16 If [Enter Password] is displayed Enter your password* and press Enter . (

Security Measures) Enter Password [ ]

The correct password Will Start Three incorrect attempts or No password for about a minute Will Not Start

(Power off)

* Supervisor Password or User Password set in the Setup Utility (not the Windows password). When an application or file that was previously displayed appears on your screen The standby or hibernation mode has been set (

Functions). Standby/Hibernation O p e r a t i o n 3 Log on to Windows Windows 2000 After confirming that the hard disk drive indicator (

) has turned off, input the user name and password, then select [OK]. Until the correct user name and password are entered, the computer will not operate. Windows XP After confirming that the hard disk drive indicator (

and input the password, then select computer will not operate.

) has turned off, select the user

. Until the correct password is entered, the 4 Select your application You are able to start working on your computer. NOTE The power saving function is factory set, so if there is no input from a key, the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hibernation mode (

Standby/Hibernation Functions). The computer will resume by pressing the power switch. Windows XP When switching to a different user with the Fast User Switching function, it may not be possible to set the settings of the display. In this case, log on with the administra-

tor authority again, not using the Fast User Switching function, and try the operation once more. 17 Starting Up/Shutting Down Shutting Down (power off your computer) This procedure is for shutting down the computer without using the standby or hibernation function (

Standby/Hibernation Functions). 1 Save important data and close each application 2 Windows 2000 Select [Start] - [Shut Down]

Windows XP Select [Start] - [Turn Off Computer]

3 Windows 2000 Select [Shut down], then select [OK]

Windows XP Select [Turn Off]

Your computer will power off automatically. Restarting your computer (without shutting down) Windows 2000 Select [Restart], then select [OK]. Windows XP Select [Restart]. CAUTION Do not do the following during the shutdown/restart procedure. Connecting or disconnecting the AC adaptor. Touching the power switch. Performing any keyboard, touch pad, touchscreen (only for models with touchscreen) or external mouse operations. Closing the display.

, U , and select [Shut down] with NOTE To shut down using the keyboard, Windows 2000 Press Windows XP Press To quickly resume computer operation after shutting down, The standby or hibernation function is available (

Functions).

, U , and select [Turn Off] with

, then press Enter .

, then press Enter . Standby/Hibernation n o i t a r e p O 18 Touch Pad Use the touch pad to move the cursor on the display and perform normal computer operations. Work Surface Function Moving the Cursor Operation Tapping/Clicking Right Button Left Button Double-Tapping/

Double-Clicking Move the tip of your finger lightly over the work surface. tapping or or clicking Dragging or double-tapping double-clicking Two quick taps, but on the second tap leaving your fin-

ger down (applying pres-

sure) and moving it on the work surface. While holding down the but-

ton, moving your finger on the work surface. O p e r a t i o n Scroll Scroll a document

(The movements will dif-

fer depending on the ap-

plication.) NOTE Besides the above operations, operations such as Zoom and Pan are possible by allocating these functions to the buttons and/or pad. For more details, refer to [Mouse Properties]*.

* Windows 2000

: Select [Start] - [Settings] - [Control Panel] - [Mouse].

: Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]. The operations of Scroll, Pan or Zoom will differ depending on the application. There are cases the touch pad will not support these operations even with an application that sup-

ports the functions. Windows XP Handling the Touch Pad The touch pad is designed to be used with a fingertip only. Therefore, avoid the following actions, which may cause damage to the work surface. Placing any object on the work surface Pressing down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens) Try to avoid having any harmful substances such as oil, come in contact with the touch pad. The cursor may not work properly in such cases. When the touch pad becomes dirty:

Wipe to dirt by using a dry soft cloth such as gauze or a soft cloth first applied with deter-

gent diluted with water and then thoroughly wrung. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. 19 Reference Manual The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals can also be printed. The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works, and other useful information. (Refer to the cover of this manual for a list of the main contents included.) Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away from your home or office. It also offers helpful explanations on how to use the Touchscreen more effectively (only for models with touchscreen). Running the Reference Manual or Important Tips Reference Manual Windows 2000 Select [Reference Manual] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]

Windows XP Select [Reference Manual] in [Start]

on the desktop Important Tips Select Important Tips can also be accessed from the following menu. Windows 2000 Select [Important Tips] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]

Windows XP Select [Important Tips] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals]

When the Reference Manual or Important Tips is started up for the first time, the License Agreement of the Acrobat Reader may be displayed. If it is displayed, after reading the agreement, select [Accept] to access the Reference Manual or Important Tips. NOTE Illustrations may be difficult to view depending on the magnification. If the illustration is too small, magnify the display. The characters in PDF files (such as the Reference Manual) may be difficult to read depending on the Acrobat Reader settings and the Windows Desktop settings. In such cases, change the Acrobat Reader settings with the following procedure. 1 Start up Acrobat Reader. 2 Select [Edit] - [Preferences] - [Accessibility], and then set [Color Scheme] to [Use colors specified in document]. When the taskbar is hidden at the bottom portion of Acrobat Reader, set the maximum display window size. If a printer is connected, we recommend printing pages. The illustrations and display samples may not print with a high quality. Windows XP When switching to a different user with the Fast User Switching function, PDF files may not be printed properly. In this case, log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more. n o i t a r e p O 20 List of Error Codes The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If your system displays any of the below error messages other that the ones marked with an asterisk (*), write down the message and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error. Fixed disk in not working or not configured properly. Check to see if fixed disk is attached properly. Run Setup. Find out if the fixed-disk type is correctly identified. 0200 Failure Fixed Disk 0210 Stuck key Stuck key on keyboard. 0211 Keyboard error Keyboard not working. 0212 Keyboard Controller Failed Keyboard controller failed test. May require replacing keyboard controller. 0213 Keyboard locked - Unlock key switch Unlock the system to proceed. 0230 System RAM Failed at offset : nnnn System RAM failed at offset nnnn of in the 64k block at which the error was detected. 0231 Shadow RAM Failed at offset : nnnn Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. 0232 Extended RAM Failed at offset : nnnn Extended RAM Failed at address line : nnnn Extended memory not working or not configured properly at offset or address nnnn. 0250 System battery is dead - Replace and run SETUP The CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup to reconfigure the system.

*0251 System CMOS checksum bad - Default configuration used System CMOS has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in CMOS. The BIOS installed Default SETUP Values. If you do not want these values, enter Setup and enter your own values. If the error persists, check the system battery or contact Panasonic Technical Support. Previous POST did not complete successfully. POST loads default values and offers to run Setup. If the failure was caused by incorrect values and they are not corrected, the next boot will likely fail. On systems with control of wait states, improper Setup settings can also terminate POST and cause this error on the next boot. Run Setup and verify that the wait-state configuration is correct. This error is cleared the next time the system is booted. Drive A: or B: is present but fails the BIOS POST diskette tests. Check to see that the drive is defined with the proper diskette type in Setup and that the diskette drive is attached correctly. 0260 System timer error The timer test failed. Requires repair of system board. 0270 Real time clock error Real-time clock fails BIOS test. May require board repair.

*0280 Previous boot incomplete - Default configuration used 0281 Memory Size found by POST differed from EISA CMOS Memory size found by POST differed from EISA CMOS. 02B0 Diskette drive A error 02B1 Diskette drive B error 02B2 Incorrect Drive A type - run SETUP Type of floppy drive A: not correctly identified in Setup. 02B3 Incorrect Drive B type - run SETUP Type of floppy drive B: not correctly identified in Setup. 02D0 System cache error - Cache disabled Contact Panasonic Technical Support. 02F0: CPU ID:

CPU socket number for Multi-Processor error. 02F4: EISA CMOS not writable ServerBIOS2 test error: Cannot write to EISA CMOS. T r o u b l e s h o o t i n g 21 List of Error Codes 02F5: DMA Test Failed 02F6: Software NMI Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error: Fail-Safe Timer takes too long. device address Conflict Address conflict for specified device. Allocation Error for: device Run ISA or EISA Configuration Utility to resolve resource conflict for the specified device. Failing Bits : nnnn The hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the map indicates a failed bit. See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory. Invalid System Configuration Data Problem with NVRAM (CMOS) data. I/O device IRQ conflict I/O device IRQ conflict error. Operating System not found Operating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed disk and drive A: are properly identified. Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. Parity is a method for checking errors in binary data. A parity error indicates that some data has been corrupted. Parity Check 1 nnnn Parity Check 2 nnnn Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. Press <F1> to resume, <F2> to Setup Displayed after any recoverable error message. Press <F1> to start the boot process or <F2> to enter a Setup and change the settings. Write down and follow the information shown on the screen. g n i t o o h s e b u o r T l 22 Dealing with Problems (Summary) When a problem occurs, refer to this page. The Reference Manual also contains detailed information. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic Technical Support. Starting Up The power indicator or bat-

tery indicator is not lit

[Enter Password] is displayed POST Startup Error(s) is displayed Windows startup, or an op-

eration is extremely slow The date and time are incor-

rect When resuming from the standby or hibernation mode, [Enter Password]

does not appear even if a password has been set in the Setup Utility When Invalid system disk. Replace the disk, and then press any key. (or a simi-

lar message) is displayed When the administrator password is forgotten Check the cable connection for the AC adaptor. Check to see if a fully charged battery is properly inserted. Remove the battery pack and disconnect the AC adaptor, then connect them again. Input your password. If you have forgotten it, contact Panasonic Technical Support. page 21 Press F9 in the Setup Utility (

Setup Utility). This will restore the Setup Utilitys settings to their default values (except the password settings). Then, the Setup Utility must be run once again for you to input the appropriate operating environment set-

tings. (The processing speed depends on the application software used, so this operation may not cause the processing speed to increase.) You can set the date and time using the following procedure:

Windows 2000

[Control Panel] - [Date/Time]

Windows XP

[Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]

If you continue to experience problems, the internal battery maintaining the clock may need to be replaced. Contact Panasonic Technical Support. When the computer is connected to a LAN, confirm the date and time of the server. This computer will not correctly recognize the date and time starting from the year 2100 A.D. Even when a password has been set in the Setup Utility, [Enter Password] does not appear when the computer resumes from the standby or hibernation mode. If you want to use the security function when using the standby or hibernation mode, use the Windows password as follows:

Windows 2000 Set the password in [Control Panel] - [Users and Passwords], then add the check mark for

[Prompt for password when computer goes off standby] in [Control Panel] - [Power Op-

tions] - [Advanced]. Windows XP Select the account to change in [Control Panel] - [User Accounts] and set the password, then add the check mark for [Prompt for password when computer resumes from standby] in

[Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced]. This means a floppy disk that does not contain system startup information has been left in the floppy disk drive. Remove the floppy disk, and press any key. This message may appear when certain USB devices are connected. Remove the USB device, or set [Legacy USB support] in [Advanced] menu of the Setup Utility to [Dis-

able]. If the message still appears even after trying the above two measures, this may be an indication that some type of hard disk failure has occurred. Contact Panasonic Technical Support. Windows 2000 After reinstalling, setup Windows and then set the password again. Windows XP If you have created a password reset disk (

page 15), a message is displayed when you fail to correctly enter the password. Follow the messages instructions and set the password again by using the password reset disk. If you have not created a password reset disk, after reinstalling, setup Windows and then set the password again. T r o u b l e s h o o t i n g 23 Dealing with Problems (Summary) Starting Up (continued) When the previous item is not the cause Display No display after powering on The power has not been turned off, but after a cer-

tain period of time, there is no display When the battery pack is used, the screen is darker than when the AC adaptor is connected The cursor cannot be con-

trolled properly An afterimage appears (e.g., green, red, and blue dots remain on the display) or there are dots not display-

ing the correct colors The screen becomes disor-

dered g n i t o o h s e b u o r T l 24 Setup Utility). This will restore the Setup Press F9 in the Setup Utility (

Utilitys settings to their default values (except the password settings). Try removing all peripheral devices. Check a disk error using the following procedure. Windows 2000 1 Select [Local Disk(C:)] with the right button in [My Computer], and select [Proper-

ties].

[Properties]. 2 Select [Tools] - [Check Now]. 3 Select [Start] after selecting required items in [Check disk options]. Windows XP 1 Select [Local Disk(C:)] with the right button in [Start] - [My Computer], and select 2 Select [Tools] - [Check Now]. 3 Select [Start] after selecting required items in [Check disk options]. At startup, hold down F8 when the [Panasonic] screen disappears, and release your finger when the Windows Advanced Options Menu is displayed. Start the computer in Safe Mode, and confirm the details of the error. When there is no display to an external display, Check your cable connection to the external display. Confirm your display is powered on. Check the settings for your external display. Try switching the display destination by pressing Fn + F3 . Has the computer been set to the power-saving mode?

To resume operation of your computer from the condition the power of the display is off

(for energy conservation purposes), press any key unrelated to the direct triggering of a selection, like Ctrl . To save power, your computer may have automatically entered the standby mode (power indicator blinks green) or hibernation mode (power indicator turns off). In such cases, press the power switch. If you want to switch the display destination repeatedly by pressing Fn + F3 , make sure that the display destination has switched completely each time before pressing Fn + F3 again. Press Fn + F2 and adjust the brightness. Note, however, that when the brightness is increased, the battery running time will become shorter. Brightness can be set to separate levels for when the AC adaptor is connected and when it is disconnected. page 26).

, then press Enter ).

, U , and select [Restart] with If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard (Press If the computer does not respond to keyboard commands, read Computer hangs

If an image is displayed for a prolonged period of time, an afterimage may appear. This is not a malfunction. The afterimage will disappear when a different screen is displayed. High-precision and advanced technologies are necessary in the production of color liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either fail to light or remain constantly lit (that is, more than 99.998% of elements are function-

ing properly), no defect is considered to exist. Changing the number of colors or resolution of the display may affect the screen. Restart the computer. Windows XP When using Extended Desktop, use the same display colors for the external display as those used by the LCD. Display (continued) The external display no longer displays properly When the screensaver is set, an error will occur during a resume operation Windows XP An error occurs or the com-

puter freezes while using Extended Desktop Shutting down Windows cannot be shut down or restarted This program is not re-

sponding is displayed when shutting down or log-

ging off. Battery Indicator The red indicator lights The red indicator blinks The orange indicator blinks Reference Manual The Reference Manual is not displayed When an external display not compatible with the power saving mode is used with the computer, the external display may no longer display properly when the computer enters the condition the power of the display is off (for energy conservation purposes). In such cases, turn off the power to the external display. When the computer automatically enters the standby or hibernation mode while the screensaver is running, an error may occur during a resume operation. In such cases, turn off the screensaver or try changing the pattern of the screensaver. If you use a 3D screen saver while in Extended Desktop mode at a high resolution, an error may occur or the computer may freeze. Under these conditions, do not use a 3D screen saver. If a USB device is connected, try removing it. This message appears periodically; for example, when using a Wireless LAN. If the mes-

sage appears, select [End Now]. Delete the check mark for [Show the tray icon] in the following menu. Windows 2000

[Start] - [Programs] - [Intel Network Adapters] - [Intel(R) PROSet]

Windows XP

[Start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet]

The battery level is very low (the charge is less than approx. 9% capacity). Connect the AC adaptor. You can use the computer when the indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on. Quickly save your data and power off your computer. Remove the battery pack and discon-

nect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. The battery pack or recharg-

ing function may be defective. Battery cannot be recharged temporarily because the internal temperature of the battery pack is outside of the acceptable temperature range for recharging. Once the allowable range re-

quirement is satisfied, charging begins automatically. Your computer can be used normally. Is Acrobat Reader installed?

If Acrobat Reader is not installed, run [c:\util\reader\ar505enu.exe] in [Start] - [Run] to reinstall the program. When installing the program, do not change the installation destina-

tion folder. If the destination folder is changed, the Reference Manual cannot be opened from the [Start] menu. T r o u b l e s h o o t i n g 25 Dealing with Problems (Summary) Fast User Switching Function Windows XP Some applications do not work properly When switching to a different user with the Fast User Switching function, the following problems may occur. Some applications may not work properly (for example, PDF files may not be printed properly). It may not be possible to set the settings of the display. A serial mouse may not work. Wireless LAN may not work. If any of the above occur, log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more. Others Computer hangs Press Ctrl + Shift + Esc to open Task Manager and close the software application which is not responding. After shutting down by pressing the power switch for more than four seconds, press the power switch to power on and open the application again. If the program no longer works normally, delete the program using the following proce-

dure. Then reinstall the program. Windows 2000 Windows XP

: [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]

: [Start] - [Control Panel] - [Add or Remove Programs]

g n i t o o h s e b u o r T l 26 Reinstalling Software When reinstall procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data that is on your hard disk before running the reinstall procedure. The reinstall procedure will return the computer to its original condition. If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstall procedure. Before Reinstallation Preparing You will need the followings:

Product Recovery CD-ROM and CD drive If it was necessary to create backup disks (Create Backup Disks for Reinstallation on page 14), you will need the backup disks (e.g., FIRSTAID FD) and the floppy disk drive. The operation of reinstallation takes about 20 - 30 minutes. Important Before the reinstallation procedure, remove all peripherals (except for the CD drive). Be sure the AC adaptor is connected until the reinstallation procedure is completed. Reinstalling 1 Turn the computer off and set the CD drive in the multi-

media pocket. 2 Turn the computer on, and immediately hold down F2 . Release the key when the Setup Utility starts up. If the password has been set, enter the Supervisor Pass-

word. 3 Write down all of the contents of the Setup Utility and then press F9 . At the confirmation message, select [Yes] and then press Enter . 4 Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of the [Boot] menu. 5 Place the disc number one of the recovery CDs into the CD drive. 6 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart, and this screen should appear.

Select a number

1. Start restoring the operating system. 2. Erase the whole data on HDD for security. 3. End

7 Select [1. Start restoring the operating system.]. The License Agreement screen should appear. 8 Select [1. Yes, I agree to the provisions above and wish to continue!]. This screen should appear. Windows 2000

Select a number

1. Restore Windows(R) 2000 Professional to the whole HDD. 2. Make two partitions, for the operating system and data. And restore Windows(R) 2000 Professional to the operating system partition.

(All existing partitions on HDD will be lost.) 3. Restore Windows(R) 2000 Professional to the first partition. 4. End

Windows XP

Select a number

1. Restore Windows(R) XP Professional to the whole HDD. 2. Make two partitions, for the operating system and data. And restore Windows(R) XP Professional to the operating system partition.

(All existing partitions on HDD will be lost.) 3. Restore Windows(R) XP Professional to the first partition. 4. End

9 Make a selection from the menu. When selecting [2], enter the basic partition size for the operating system installation and press Enter .

(The data partition size is the remainder after subtract-

ing the basic partition size.) To select [3], the initial partition size must be 6 GB or more of the hard disk size. Reinstallation cannot be per-

formed with a small partition size. T r o u b l e s h o o t i n g 27

<Changing the drive letter>

You can change the drive letter for the CD drive or hard disk drive by the following steps. Drive letters can only be changed when two or more parti-

tions have been created on the hard disk drive. The name of the C: drive cannot be changed. We recommend that you make these changes before in-

stalling applications. Windows 2000 1 Select [Start] - [Settings] - [Control Panel] - [Administra-

tive Tools] - [Computer Management]. 2 Select [Disk Management] from [Storage]. 3 Right click on the partition of the hard disk or the name of the CD drive and select [Change Drive Letter and Path...]. 4 Select [Edit]. 5 Select [Assign a drive letter] and select the new drive let-

ter, and then select [OK]. 6 At the confirmation message, select [Yes]. Windows XP 1 Select [Start] - [Control Panel] - [Performance and Mainte-

nance] - [Administrative Tools] - [Computer Management]. 2 Select [Disk Management] from [Storage]. 3 Right click on the partition of the hard disk or the name of the CD drive and select [Change Drive Letter and Paths...]. 4 Select [Change]. 5 Select [Assign the following drive letter] and select the new drive letter, and then select [OK]. 6 At the confirmation message, select [Yes]. Reinstalling Software 10 At the confirmation message, press Y . The operation of reinstallation for the hard disk starts au-

tomatically. (The operations take about 15 minutes.) CAUTION Do not cancel the reinstall procedure before it is completed. When a message appears instructing you to insert the next CD, insert the recovery CD showing the next number in the sequence, and then select [OK]. If the message The media does not contain the cor-

rect file appears, select [OK]. A message will ap-

pear instructing you to insert the next CD. Confirm that the proper recovery CD has been in-

serted by opening the tray of the CD drive and then close the tray, then select [OK]. 11 After the reinstallation procedure completes, the follow-

ing message will appear on the display. Remove the recovery CD. Windows 2000 Windows(R) 2000 Professional install wizard will start after reboot. Remove the Product Recovery CD-ROM, then restart the computer by pressing Ctrl + Alt + Del (Delete). Windows XP Windows(R) XP Professional install wizard will start after reboot. Remove the Product Recovery CD-ROM, then restart the computer by pressing Ctrl + Alt + Del (Delete). 12 Restart the computer by pressing Ctrl + Alt +

Del and immediately hold down F2 . Release the key when the Setup Utility starts up. If the password has been set, enter the Supervisor Pass-

word. 13 Press F9 . At the confirmation message, select [Yes] and then press Enter . (The Setup Utility settings will return to their default values. Even the security settings with the excep-

tion of the password(s) will return to their default values.) 14 Press F10 . At the confirmation message, select [Yes] and press Enter . 15 Perform the setup procedure for Windows by following the instructions on the screen. Windows 2000 Page 12 Windows XP Page 13 16 Run the Setup Utility and change the settings where nec-

essary. NOTE When the FIRSTAID FD is to be created, follow the steps in the readme.txt on the disk. (

page 14) g n i t o o h s e b u o r T l 28 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. B. C. D. E. F. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. You may use the Programs only on the single Product which was accompanied by the Programs. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-

TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intel's proprietary rights in the product. A p p e n d i x 29 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence l'utilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles ci-

dessous. En utilisant les logiciels, vous vous engagez de manire dfinitive respecter les termes, clauses et condi-

tions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde l'utilisation par les prsentes. Vous assumez l'entire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de l'installation, de l'utilisation et des rsultats obtenus. A. B. C. D. E. F. Licence MEI vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs d'utiliser les Logiciels conformment aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir qu'un droit limit d'utiliser les Logiciels et la documentation les accompagnant et vous vous engagez n'obtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algorithmes, concepts, dessins, configurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, proprit et droits resteront tous MEI ou leurs propritaires. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. Vous et vos employs ou agents tes requis de protger la confidentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant la disposition d'un tiers, par partage de temps ou de quelque autre manire que ce soit, sans l'autorisation crite pralable de MEI. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documen-

tation les accompagnant pour quelque fin que ce soit, l'exception d'une (1) copie des Logiciels des fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie qu'en rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. Vous ne pouvez retirer aucune marque de droits d'auteur, marque ou autre ni aucune identification de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modifier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, l'exception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, l'exception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence n'est effective que pour la dure de possession ou de crdit-bail du Produit, moins d'une rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dfinies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre qu'ils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre commu-

nication entre nous, relativement l'objet du prsent contrat. i x d n e p p A 30 Hard Disk Data Erase Utility This computer is equipped with a utility for erasing hard disk data. When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data following the steps below. The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunctions or other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility. Preparing You will need the Product Recovery CD-ROM and CD drive. NOTE Be sure the AC adaptor is connected until the procedure is completed. This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks. This utility cannot erase data from damaged disk. This utility cannot erase data for specific partitions. After executing this utility, the computer cannot be booted from the hard disk. Procedure 1 Turn the computer off and set the CD drive in the multimedia pocket. 2 Turn the computer on, and immediately hold down F2 . Release the key when the Setup Utility starts up. If the password has been set, enter the Supervisor Password. 3 Select [Boot] menu, then select [CD Drive] and press F6 until [CD Drive] is at the top of the [Boot] menu. 4 Place disc number one of the recovery CDs into the CD drive. 5 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will reboot, and this screen should appear.

Select a number

1. Start restoring the operating system. 2. Erase the whole data on HDD for security. 3. End

6 Select [2. Erase the whole data on HDD for security.]. 7 At the confirmation message, press Y . 8 At [<<<Start menu>>>], press Enter . 9 The time required for erasing data will be displayed. Press Space . 10 At the confirmation message, press Enter . The operation of erasing the hard disk starts. 11 After the operation is complete:

Under normal conditions, the message [Hard disk data has been deleted.] will be displayed. If a problem occurred during the operation, an error message will be displayed. 12 Remove the recovery CD, then turn off the computer by using the power switch. A p p e n d i x 31 WinDVD WinDVD (hereafter, WinDVD) is a software application for DVD playback. Here, you will find explanations and general information on the installation procedure and how to access the online manual. Installing WinDVD CAUTION Close all other software application before running the Setup program for WinDVD for added safety. Log on as the administrator. 1 Set the WinDVD CD-ROM in the CD drive. The WinDVD setup program will run automatically (allow some time for disc recognition). When the setup program will not run automatically, input [x:\setup] in [Start] - [Run] and select [OK]. (xis the drive letter. You can change the letter to suit your preference.) 2 Select [Next] at the Welcome Message. 3 After reading the License Agreement*, select [Yes] if you agree to the terms.

* Refer to the LIMITED USE LICENSE AGREEMENT (

4 Follow the on-screen instructions and install WinDVD. page 29)

<Confirmation of the DVD-ROM drive settings>

To run WinDVD, it is necessary to make the following settings. 1 Windows 2000 Select [Start] - [Settings] - [Control Panel] - [System] - [Hardware] - [Device Manager]. Windows XP Select [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Man-

ager]. 2 Double-click [Primary IDE Channel] for [IDE ATA/ATAPI controllers]. 3 Select [Advanced Settings], and confirm that [Transfer Mode] is set to [DMA if available] for [Device 0]. 4 Double-click [Secondary IDE Channel] for [IDE ATA/ATAPI controllers] and perform as the step

. Running WinDVD Windows 2000 Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select Windows XP Select [Start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select on the desktop. on the desktop.

<How to access the online manual>

Select ? of the WinDVD control panel. NOTE Do not enter the standby or hibernation mode while WinDVD is running. Do not start WinDVD while the hard disk drive indicator is blinking immediately after the computer was started up. If you maximize the video display window, you can return to the original window size by double-clicking over the images. During video playback (while the access lamp is on), do not eject the disc. Do not use other applications or the Command Prompt, and do not change the settings of the screen properties. In some cases, when the number of colors for the display is increased, a message appears and the DVD cannot be played. If this happens, reduce the number of display colors. Immediately after resuming from a pause, frame dropping may occur depending on the operating environment or DVD video (images or sounds are disrupted). In the Extended Desktop (Dualview) or simultaneous (internal/external) display mode, there are times when images or video are not displayed correctly. During a prolonged period of rapid advance, the pause mode may be established at some point. If this happens, exit WinDVD, and restart. i x d n e p p A 32 About Regions Setting The DVD-Video has a region code that is fixed according to the region where it is sold. In order to play a DVD-Video, the region code of the player software and of the drive must match that of the DVD-Video.

<Example>

For U.S.A. and Canada: 1 For Europe: 2 The region code is not set prior to the shipment of this drive. Therefore, operations will differ depending on the first DVD-

Video played. In the case of a DVD-Video with a specific region code:

The drive will automatically be set with the same region code as the DVD-Video. In the case of any other DVD-Video:

[Confirm Region] appears. Select region code and select [OK]. Play now begins.

([Confirm Region] may not be displayed for some DVD-Videos. To confirm the current region code and the number of settings remaining, right-click on the WinDVD screen and select [Setup]-[Region].) NOTE

[Confirm Region] will also be displayed if a DVD-Video with one region code is inserted into a drive for which another region code has already been set. CAUTION The region code can be set a total of five times, including the initial setting. Proceed very carefully, because after the fourth change has been made, the region code set last is fixed and no further changes can be made. The user must take responsibility for any trouble that results from illegally changing or altering the region code. Information Inquires about WinDVD should be made to InterVideo, Inc. InterVideo, Inc. URL:

E-mail: support@intervideo.com http://www.intervideo.com/

A p p e n d i x 33 Names and Functions of Parts Wireless LAN Antenna Wireless LAN)

LED Indicators

LED Indicators) Power status Battery pack status Ventilation Hole This hole allows heat to exit. CAUTION Do not block or place the computer in a location that may prevent proper venti-

lation. External Display Port

External Display) Serial Port Use this port to a serial mouse or serial com-

munication devices. Speakers Sound is output from Card Speakers built into the back panel of the LCD screen. To adjust the volume:

Fn + F5 / Fn + F6 Speaker on/off : Fn + F4 LED Indicators

LED Indicators) Caps Lock Numeric Key (NumLk) Scroll Lock (ScrLk) Multimedia pocket device status Hard disk drive status Touch Pad

page 19) Carrying Handle For enhanced portability and in-the-field efficiency. LCD

(Only for models with touchscreen:

Touchscreen) Power Switch Before using the computer for the first time, carefully read the [LIMITED USE LI-

CENSE AGREEMENT]. If you agree to the conditions, remove the seal. PC Card Slots

PC Cards) USB Ports

USB Devices) Function Keys For information on the key combi-

nations available.

Key Combinations) DC-IN Jack DC IN 15.1-16.0 V Multimedia Pocket

Multimedia Pocket and CD Drive) i x d n e p p A 34 Modem

Modem) I/O Box Connector For connecting printer, external mouse, keyboard, etc., through the I/O box (optional). Ventilation Hole This hole allows heat to exit. CAUTION Do not block or place the computer in a location that may prevent proper venti-

lation. LAN

LAN) Security Lock LOCK A cable can be connected to prevent theft of your computer. For more in-

formation, read the manual that comes with the cable. MP Release Button

Multimedia Pocket ) Headphone Jack Use this jack to connect head-

phones or amplifier-equipped speakers. Audio output from the internal speaker is disabled when headphones or external speakers are connected. Microphone Jack Use only a monaural condenser microphone (miniature jack). Us-

ing an input source other than a monaural condenser microphone may not allow audio to be input or may damage the equipment. Expansion Bus Connector Port Replicator)

RAM Module Slot

RAM Module) Battery Pack

on the desktop, Battery Power) A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. A p p e n d i x 35 Specifications Main Specifications Model No. CPU Memory (Expandable to) Video Memory Type LCD Displayed Colors*1 External Display Hard Disk Drive Keyboard Pointing Device Speaker Sound Slots PC Card Slots Allowable current

(total for two slots) RAM Module Slot*4 Interface External Display Port Serial Port Microphone Jack*5 Headphone Jack Expansion Bus Connector USB Port I/O Box Connector Modem LAN Wireless LAN AC Adaptor*6 Input Output Power Consumption*7 Environ-

ment In use Temperature Humidity Not in Temperature use Humidity CF-73E3KVXDM CF-73ECKTXDM CF-73ECNTXDM CF-73ECLTXDM CF-73ECPTXDM CF-73E3KVXKM CF-73ECKTXKM CF-73ECNTXKM CF-73ECLTXKM CF-73ECPTXKM CF-73E3KTXKM Intel Pentium M processor 1.4 GHz L2 (Second) Cache Memory: 1 MB 256 MB

(768 MB Max.) 32 MB 13.3 type (TFT) 13.3 type (TFT) with Touchscreen 256 MB

(768 MB Max.) 64 MB 512 MB

(1024 MB Max.) 512 MB

(1024 MB Max.) 256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024 x 768 dots) 256/65536/16M colors (640 x 480 dots/800 x 600 dots/1024 x 768 dots/1280 x 1024 dots/

1600 x 1200 dots/2048 x 1536 dots)*2 40GB*3 87 keys Touch Pad Touch Pad, Touchscreen (Anti-Reflection, Stylus (included) touch ca-

pable) Card Speaker x 2 WAVE and MIDI playback Two Type I or Type II, or one Type III 3.3 V: 400 mA 5 V: 400 mA 200-pin, SO-DIMM, DDR-SDRAM, PC2100 Compliant Mini Dsub 15-pin female Dsub 9-pin male Miniature jack, 3.5 DIA Miniature jack, 3.5 DIA Impedance 32 , Output Power 4 mW x 2 Dedicated 84-pin female 4-pin x 2, USB 2.0 Dedicated 36-pin male RJ-11 jack Data: 56 kbps (V.92) FAX:14.4 kbps RJ-45 jack IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX 802.11b 100 V - 240 V AC, 50 Hz/60 Hz 15.6 V DC, 5.0 A Approx. 43 W*8 / Approx. 80 W (maximum when recharging in the ON state) 5 C to 35C {41 F to 95 F}

30% to 80% RH (No condensation)

-20 C to 60 C {-4 F to 140 F}

30% to 90% RH (No condensation)

*1 A 16M color display is achieved by using the dithering function. Windows XP : A 256 color and 640x480 dots are not supported.

*2 Maximum resolution depends on the specifications of the external display. Windows XP : A 256 color and 640x480 dots are not supported.

*3 1GB = 109 bytes

*4 Only a RAM card designed for PC2100 can be added.

*5 Use only a monaural condenser microphone.

*6 The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a 125 V AC compatible AC cord.

*7 Approx. 1.0 W when the battery pack is fully charged (or not being charged) and the computer is off. Approx. 1.2 W when the Wake up from LAN function has been enabled.

*8 Rated power consumption. i x d n e p p A 36 Main Specifications Model No. Battery Pack Operating Time*1 Charging Time*1 Main battery Main battery +

Second battery Main battery Main battery +

Second battery Clock Battery Physical Dimensions

(W x H x D) Weight (including the carrying handle) CF-73E3KVXDM CF-73E3KVXKM CF-73ECKTXDM CF-73ECKTXKM CF-73ECLTXDM CF-73E3KTXKM CF-73ECNTXDM CF-73ECNTXKM CF-73ECPTXDM CF-73ECLTXKM CF-73ECPTXKM Li-ion 11.1 V, 3.8 Ah Approx. 5 hours Approx. 6 hours Approx. 5 hours Approx. 6 hours Approx. 4 hours Approx. 9 hours Approx. 3 hours Approx. 11 hours Approx. 9 hours Approx. 11 hours Approx. 7hours Approx. 6 hours Coin type lithium battery 3.0 V 297 mm x 32 - 42.5 mm x 254 mm 297 mm x 35.5 - 46 mm x 254 mm

{11.7 " X 1.2 - 1.7 " X 10 "}

(excluding the carrying handle) Approx. 2.2 kg {Approx. 4.9 lb.}

{11.7 " X 1.4 - 1.8 " X 10 "}

(excluding the carrying handle) Approx. 2.5 kg {Approx. 5.5 lb.}

*1 The numerical value given for the following conditions varies depending on the usage conditions. LCD brightness: minimum

[Audio Power Management] in the Setup Utility: [Enable]

[Power schemes] in [Power Options]: [Max Battery]

ATi POWERPLAY: [Optimal Battery Life]

Wireless LAN: radio off Software Model No. Operating System Utility Programs CF-73E3KVXDM / CF-73ECKTXDM /

CF-73ECNTXDM / CF-73ECLTXDM /

CF-73ECPTXDM Microsoft Windows 2000 Professional with Ser-

vice Pack3 (NTFS File System) CF-73E3KVXKM / CF-73E3KTXKM /

CF-73ECKTXKM / CF-73ECNTXKM /

CF-73ECLTXKM / CF-73ECPTXKM Microsoft Windows XP Professional with Ser-

vice Pack1 (NTFS File System) Setup Utility DMI Viewer Adobe Acrobat Reader Hard Disk Data Erase Utility*2

*2 The Product Recovery CD-ROM is required. Multimedia Pocket Device Model No. CF-73E3KVXDM /

CF-73E3KVXKM Multimedia Pocket Device DVD-ROM Drive DVD-5, DVD-9, DVD-10, DVD-18, DVD-R*3(3.95 GB, 4.7 GB), DVD-

RW*3 (4.7 GB), DVD-RAM*3*4 (2.6 GB, 4.7 GB) CD-Audio, CD-ROM, CD-R*3, Photo CD, VideoCD, Enhanced Music CD, CD-RW*3, CD-TEXT Supports DVD-ROM CD-ROM DVD-ROM read*5 CD-ROM read*5 CD-R write*6 CD-RW write CF-73E3KTXKM /CF-73ECKTXDM / CF-73ECNTXDM /

CF-73ECLTXDM / CF-73ECPTXDM / CF-73ECKTXKM /

CF-73ECNTXKM / CF-73ECLTXKM / CF-73ECPTXKM DVD-ROM & CD-R/RW Drive DVD-5, DVD-9, DVD-10, DVD-18, DVD-R*3(3.95 GB, 4.7 GB), DVD-RW*3 (4.7 GB), DVD-RAM*3*4 (2.6 GB, 4.7 GB) CD-Audio, CD-ROM, CD-R, Photo CD, VideoCD, Enhanced Music CD, CD-RW, CD-TEXT 8x speed (Max.) 24x speed (Max.) 8x speed (Max.) 24x speed (Max.) 4x speed, 8x speed, 16x speed (Max.), 24x speed (Max.) 4x speed, 8x speed, 10x speed

*3 Read only.

*4

*5 In the case of DVD-RAM, only non-cartridge discs or removable cartridge discs can be used. If an unbalanced disc (e.g., a disc with which the balance has been displaced from the center) is inserted, the speed may become slower if there are large vibrations while the disc is rotating.

*6 Depending on the disc, the writing speed may become slower. A p p e n d i x 37 LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for a period of one (1) year from the date of purchase. This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God. Limits and Exclusions:

There are no other express warranties except as listed below. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfac-

tion, then write to the Consumer Affairs Division at the address indicated below. SOFTWARE LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your require-

ments or that the operation of the Programs will be uninterrupted or error free. Panasonics entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishan-

dling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any Program. DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLI-

GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules. i x d n e p p A 38

To obtain service or technical assistance within the continental U.S.A. and Alaska. DIAL TOLL FREE: 1-800-LAPTOP5 Correspondence requesting product information should be sent to:

Panasonic Computer Solutions Company 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Period of Coverage Type of Failure Coverage Whole Product (except Batteries), AC adaptor and CD-ROM

(if factory installed) Three (3) Years from Date of Original End User Customer Purchase Defective Materials or Workmanship Batteries, CD-ROM (unless factory installed), Port Replicator, Extra Memory Modules and all other Peripherals, Options and Accessories One (1) Year from Date of Original End User Customer Purchase Defective Materials or Workmanship Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-

tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFT-

WARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-

TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. A p p e n d x i Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. 39 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. Panasonic Computer Solutions Company Panasonic Canada Inc. 50 Meadowlands Parkway, Panazip 2F-5, 5770 Ambler Drive Mississauga, Secaucus, NJ 07094 Ontario L4W 2T3 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan FJ0203-5073 DFQX5379WB

 

 

Supplementary Instructions for Wireless LAN This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the computer differs from that in the Operating Instructions. Your computer is equipped with Wireless LAN enabling you to communicate using radio frequencies. For U.S.A. Operating Instructions Read Replace the Federal Communications Commission Radio Frequency Interference Statement (

Me First) with the following. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

FCC RF Exposure Warning:

This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body (exclud-

ing extremities of hands, wrist and feet) during wireless modes of operation.

This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra-

dio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) This product and your Health This product, like other radio devices, emits radio frequency elec-

tromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recom-

mendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representa-

tives of the organization. These situations may for example include:

Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of in-

terference caused by such unauthorized modification will be the re-

sponsibility of the user. We and its authorized resellers or distribu-

tors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. Specifications Wireless LAN module Data transfer rates Standards supported Transmission method Wireless channels used RF frequency band IEEE802.11g : 54 Mbps/48 Mbps/36 Mbps/24 Mbps/18 Mbps/12 Mbps/9 Mbps/6 Mbps

(automatically switched) IEEE802.11b : 11 Mbps/5.5 Mbps/2 Mbps/1 Mbps (automatically switched) IEEE802.11g/IEEE802.11b OFDM system, DSSS system Channels 1 to 11 2.412 GHz ~ 2.462 GHz Wireless LAN 3 If you use a wireless LAN, you can use a network without cable connections. CAUTION

Communication is performed through the wireless LAN antenna. Do not block the antenna area with your hand or otherwise interfere with the passage of the radio signals. NOTE

The communication speeds and distances differ depending on the devices that support the wireless LAN, the installation environment and other ambient conditions.

One characteristic of radio waves is that their transmission rate tends to drop as the communication distance increases. It is recommended that the devices supporting the wireless LAN be used in close vicinity to each other.

The rate may drop while a microwave oven is being used. Windows XP

Do not use the Fast User Switching function.

Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity.

If you intend to use the computer in the environments described above, turn the wireless Precautions LAN off using the following method:

or on the taskbar. 1 Double-click 2 Select your wireless LAN adaptor and select [General]. 3 Select [Off] for [Switch radio]. 4 Select [OK]. The icon will turn to

. Wireless LAN The Settings 4

To prevent theft of data or unauthorized access to the hard disk via a wireless LAN.

If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption.

We recommend turning the wireless LAN off when it is not used or out of range.

If you leave the wireless LAN on, the battery's operating time is shortened. To use the wireless LAN, set the profile using the following procedure. The settings will vary for different network environments depending on the network system being used. For more details, ask your system administrator or the person in charge of the network. CAUTION

Set profiles for each user using the following procedure. NOTE Windows XP

If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless LAN adaptor.] is displayed, select [Yes]. Windows 2000

After setting the profile, delete the profile displayed at the time of purchase (profile name: Default). 1 2 3 Double-click on the taskbar. Select your wireless LAN adapter and select [General]. Select [On] for [Switch radio]. Wireless LAN 4 5 Select [Networks] and select [Add]. 5 Enter the profile name and network name (SSID), and then make other necessary changes, then select [Next]. 6 Make necessary changes and select [Finish]. 7 NOTE Select [OK].

About WLAN Security Client WLAN Security Client is an implementation of the client side of the IEEE 802.1X-Port Based Network Access Control protocol. Since the WLAN Security Client has already started when is displayed on the is not displayed, start up the WLAN Security taskbar, do not double-start it. If Client in the following menu. Windows XP Select [Start] - [All Programs] - [Intel] - [WLAN Security Client Manager]. Windows 2000 Select [Start] - [Programs] - [Intel] - [WLAN Security Client Manager].

For more information about how to use the WLAN Security Client, refer to [Help] in the menu bar or;

Windows XP Select [Getting Started Guide] or [User's Guide] in [Start] - [All Programs] - [Intel]. Windows 2000 Select [Getting Started Guide] or [User's Guide] in [Start] - [Programs] - [Intel]. Check the Communication Status Select or on the taskbar to check the communication status. For more information about how to use the Intel PROSet, refer to [Help] in the menu bar. Wireless LAN If the function fails to operate correctly 6 Read the operating instructions for the access point carefully and check the settings.

The access point fails to be displayed in [Available Networks]

Select the profile you are using, and select [Advanced] in [Networks]. [Connect to ad hoc networks only] may have been selected in [Connection preference]. In this case, select

[Connect to infrastructure and ad hoc networks].

This computer uses channels 1 through 11*1. Check the channel being used.

*1 In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A "Channel"

refers to the individual frequency bandwidth divisions.

The access point cannot be accessed

The network key setting may not conform to the access point. Check the network key setting of the access point and, if necessary, set it again correctly.

Depending on the access point and settings, access may not be accepted unless the computer's MAC address is registered beforehand. In this case, check the computer's MAC address using the following procedure and register it according to the operating instructions of the access point. 1 Display [Command Prompt]. Windows XP Select [Start] - [All Programs] - [Accessories] - [Command Prompt]. Windows 2000 Select [Start] - [Programs] - [Accessories] - [Command Prompt]. 2 Input [ipconfig /all], and press Enter. 3 Make a note of the 12-digit string of alphanumerics displayed on "Physical Address" line on Wireless LAN side. Then input [exit], and press Enter.

The IP address of the access point is wrong

Following the operating instructions of the access point, set the IP address of the access point again correctly.

 

 

Personal Computer Model No. CF-18/CF-29/CF-73 Series ENGLISH This Supplementary Instructions manual gives you information about Bluetooth. Supplementary Instructions for Bluetooth Read Me First ........................................................................... 2 About Bluetooth ....................................................................... 3 Connecting to Bluetooth Devices ........................................... 4 Security Setting ........................................................................ 8 LIMITED USE LICENSE AGREEMENT .................................... 9 I H S L G N E Read Me First Illustrations and Terminology in this Manual NOTE provides a useful fact or helpful information. CAUTION indicates a condition that may result in minor or moderate injury. NOTE:

CAUTION:

Windows 2000 : Information for Microsoft Windows 2000 Professional users. Windows XP

[Start] - [Run]:

: Information for Microsoft Windows XP Professional or Windows XP Tablet PC Edition users. This illustration means to click [Start], then to click [Run].

(For some applications, you may need to double-click.) Where to go for referred information.

Trademarks Microsoft and Windows are registered trademarks of Microsoft Corporation of the United States and/or other countries. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. For U.S.A. Operating Instructions Read Replace the Federal Communications Commission Radio Frequency Interference Statement (

Me First) with the following. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

FCC RF Exposure Warning:

This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body (exclud-

ing extremities of hands, wrist and feet) during wireless modes of operation.

This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra-

dio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Information to the User This product and your Health This product, like other radio devices, emits radio frequency elec-

tromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recom-

mendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representa-

tives of the organization. These situations may for example include:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of in-

terference caused by such unauthorized modification will be the re-

sponsibility of the user. We and its authorized resellers or distribu-

tors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. I H S L G N E 2 About Bluetooth Bluetooth is a technology which enables wireless communication. With Bluetooth, you can access internet or exchange data with other Bluetooth devices (e.g., computer, mobile phone, access point) without connecting cables. Bluetooth Specification

Bluetooth Specification V1.1 Compliant

Power class: Class 1 Bluetooth Services

LAN Access Profile (Client and Server)

Dial-up Networking Profile (Client and Server)

FAX Profile (Client)

Serial Port Profile (Client and Server)

Generic Object Exchange Profile

Object Push Profile (Client and Server)

File Transfer Profile (Client and Server)

Synchronization Profile (Client and Server)

Generic Access Profile

Headset Profile (AG and HS)

Hardcopy Cable Replacement Profile (Client)

Personal Area Network Profile (AP, Group and User)

Human Interface Device Profile (Host) Bluetooth Switch (Bluetooth ON/OFF) Bluetooth can be switched on or off.

(blue icon) on the taskbar and select [Disable Bluetooth]. To switch Bluetooth off Select To switch Bluetooth back on Select turns

(blue icon with red prohibition symbol) and select [Enable Bluetooth]. CAUTION Communications are conducted via a Bluetooth antenna. Do not do anything to block the radio waves, for example by obstructing the antenna segment with your hand. NOTE Communication speeds and distances may vary depending on surrounding condi-

tions, such as the other device sending or receiving communications and the instal-

lation environment. It is a characteristic of radio waves that communication speeds will tend to decrease as the communication distance increases. We recommend that communications be-

tween Bluetooth devices be conducted in as close proximity as possible. Communication speeds may decrease if a microwave oven is being used nearby. I H S L G N E 3 Bluetooth Antenna CF-18 Series Bluetooth Antenna CF-29 Series Bluetooth Antenna CF-73 Series Connecting to Bluetooth Devices Installing Bluetooth Driver Perform the following procedure after completing the first-time use operation (

ing Instructions First-time Operation). Operat-

NOTE When [Found New Hardware Wizard] is displayed, select [Cancel].

<For MUI (Multilingual User Interface) OS version>

Install the driver before you change the setting of language. If you have already changed it, set the language to the default values in the following menu. After the installation completes, change the setting of language. Windows 2000

[Start] - [Settings] - [Control Panel] - [Regional Options]

[Your locale (location)] - [English (United States)]

[Menus und dialogs] - [English]

Windows XP

[Start] - [Control Panel] - [Date, Time, Language and Regional Options] - [Regional and Language Options]

[Regional Options] - [Standards and Formats] - [English (United States)]

[Languages] - [Language used in menus and dialogs] - [English]

Windows 2000 essary. lect [OK]. Bluetooth Software...], select [Next]. in the license agreement], and select [Next]. 1 Connect the CD drive (optional), and install the driver if nec-

2 Place the Bluetooth Software CD-ROM into the CD drive. 3 Select [Start] - [Run], enter d*:\btw\setup.exe, and then se-

4 At [Welcome to the InstallShield Wizard for WIDCOMM 5 After reading the license agreement, select [I accept the terms 6 At [Destination Folder], select [Next]. 7 At [Ready to Install the Program], select [Install]. 8 At [Driver Signature Notice], select [OK]. 9 At [InstallShield Wizard Completed], select [Finish]. 10Select [Yes] to restart the computer. 11Select [Start] - [My Bluetooth Places]. 12Select the locations where you want the icon to appear, and select [Next]. I H S L G N E 4 lect [Next]. and then select [Next]. 13Enter the computer name, set [Computer type] to [Laptop], 14Select [Next]. 15At [Choose the services that this computer will offer:], se-

16Select [Skip]. 17Select [Finish]. 18Select [Start] - [Run], enter d*:\btswitch\setup.exe, and then 19At [Welcome to the InstallShield Wizard for Bluetooth 20Select [Yes, I want to restart my computer now], and select Switch...], select [Next]. select [OK].

[Finish]. The computer will restart. 21Remove the CD-ROM and the CD drive.

* d is the drive letter of the CD drive. You can change the letter to suit your preference. I H S L G N E Windows XP essary. lect [OK]. Bluetooth Software...], select [Next]. 1 Connect the CD drive (optional), and install the driver if nec-

2 Place the Bluetooth Software CD-ROM into the CD drive. 3 Select [Start] - [Run], enter d*:\btw\setup.exe, and then se-

4 At [Welcome to the InstallShield Wizard for WIDCOMM 5 After reading the license agreement, select [I accept the terms 6 At [Destination Folder], select [Next]. 7 At [Ready to Install the Program], select [Install]. 8 At [Driver Signature Notice], select [OK]. 9 At [InstallShield Wizard Completed], select [Finish]. 10Select [Start] - [All Programs] - [My Bluetooth Places]. in the license agreement], and select [Next]. 5 Connecting to Bluetooth Devices lect [Next]. select [Next]. and then select [Next]. 11Select the locations where you want the icon to appear and 12Enter the computer name, set [Computer type] to [Laptop], 13Select [Next]. 14At [Choose the services that this computer will offer:], se-

15Select [Skip]. 16Select [Finish]. 17Select [Start] - [Run], enter d*:\btswitch\setup.exe, and then 18At [Welcome to the InstallShield Wizard for Bluetooth 19Select [Yes, I want to restart my computer now], and select Switch...], select [Next]. select [OK].

[Finish]. The computer will restart. Connecting 20Remove the CD-ROM and the CD drive.

d is the drive letter of the CD drive. You can change the letter to suit your preference. NOTE Make the required settings to connect to the desired Bluetooth devices beforehand.

(e.g., installing a printer driver for the desired printer.) on the desktop.

<Example>

When connecting to Bluetooth printer using the Serial Port Profile:

1 Double-click 2 Select [Bluetooth] from the menu and select [Advanced Con-

figuration] - [Client Applications], then double-click [Bluetooth Serial Port]. The [Bluetooth Properties] screen*1 is displayed. Make a note of the Bluetooth serial port number (e.g., COM7)*2 displayed in [COM Port]. This is necessary for the setting on page 7. 3 Remove the check mark from [Secure Connection], and se-

lect [OK]. I H S L G N E 6

[OK].

[Bluetooth Serial Port] - [Find Devices]. on the taskbar, and select [Quick Connect] -

4Select [OK]. 5Right-click 6Select the desired Bluetooth printer, and select [Connect]. 7When [Created connection shortcut] is displayed, select 8When [The Bluetooth serial port COM7*2 is now configured]

9 Windows 2000 Restart the computer by selecting [Start] - [Shut Down] - [Re-

start] - [OK]. Windows XP Restart the computer by selecting [Start] - [Turn Off Com-

puter] - [Restart]. is displayed, select [OK]. I H S L G N E Bluetooth Serial Port When you use the Bluetooth serial port service, you can establish connections between two Bluetooth devices via a virtual communication port. This means that you can handle con-

nected devices in the same way as you would hard-wired connections. To establish a Bluetooth serial port connection, configure the serial port number of the selected device to the Bluetooth serial port number. Setting

<Example>

Set the serial port number of the desired printer to COM7*2. Windows 2000 1Select [Start] - [Settings] - [Control Panel] - [Printers]. 2Right-click the desired printer and select [Properties] - [Ports]. Then select [COM7*2], and select [OK]. Windows XP 1Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Printers and Faxes]. 2Right-click the desired printer and select [Properties] - [Ports]. Then select [COM7*2], and select [OK].

*1 This screen may be displayed behind the [My Bluetooth Places] screen. In this case, minimize the

[My Bluetooth Places] screen.

*2 This varies depending on the settings. 7 Security Setting You can establish security settings for individual services. To enable/disable the security setting:

1 Double-click 2 Select [Bluetooth] from the menu, and select [Advanced Con-

on the desktop. figuration] - [Client Applications]. 3 Double-click the desired application name (service). 4 To enable:

Add the check mark for [Secure Connection]. To disable:

Remove the check mark from [Secure Connection]. 5 Select [OK], then select [OK]. PIN Code Request If the security setting is enabled, when you try to connect to other Bluetooth devices, the following message will appear, and you will be asked for the PIN Code. Click here and enter a PIN Code, then select [OK]. NOTE PIN Code A PIN Code is a password for which you can set up to 16 alphanumeric characters. When establishing security settings, the PIN Code for the device to be connected (slave) must be the same as the PIN Code for the device where the connection originates (mas-

ter). I H S L G N E 8 LIMITED USE LICENSE AGREEMENT I H S L G N E THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. B. C. D. E. F. G. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, owner-

ship nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. You may use the Programs only on the single Product which was accompanied by the Programs. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. For a certain program included in the Programs, Widcomm, Inc. is a direct and intended beneficiary of this Agreement and may enforce it directly against you. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-

TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. 9 LIMITED USE LICENSE AGREEMENT TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefore set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. SOFTWARE LIMITED WARRANTY MEI warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty MEI makes to you. MEI does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. MEIs entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the country where you purchased the Product, of any defective disk or other media which is returned to MEI, together with a copy of the purchase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding, MEI shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions other than those specified by MEI by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of God. In addition, MEI shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any Program. DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. MEI ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CON-

TRACT, NEGLI-GENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOOD-

WILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIP-

MENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES. Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from country to country. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT. I H S L G N E 10 Specifications Transmission method Wireless channels used RF frequency band FHSS system Channels 1 to 79 2402-2480 MHz I H S L G N E 11 11 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. DFQX5440ZA