FCC ID: ACJ9TGCF-29D Panasonic Toughbook w/ WLAN, CDMA & OEM Modules

OPERATING INSTRUCTIONS Personal Computer Model No. CF-29 Series Contents Getting Started Read Me First ................................................. 3 Names and Functions of Parts ........................ 9 First-time Operation ...................................... 11 Reference Manual Read Me First

Key Combinations

LED Indicators Operation Starting Up/Shutting Down............................ 16 Touch Pad (Basic Operation) ........................ 19 Reference Manual ......................................... 20 Useful Information ......................................... 21 Reference Manual XP

Touch Pad

Touchscreen*1

Panasonic Hand Writing

Standby/Hibernation Functions

Port Replicator

External Display

Printer

USB Devices

Modem

LAN

Wireless LAN*2

Hard Disk Drive

Setup Utility

Icon Enlarger

Loupe Utility

Security Measures

Computing on the Road

Battery Power

Multimedia Pocket

PC Cards

RAM Module

*1Only for models with touchscreen *2Only for models with wireless LAN Troubleshooting List of Error Codes ........................................ 25 Dealing with Problems (Summary) ....................... 26 Reinstalling Software .................................... 33 Reference Manual

Dealing with Problems

(Advanced)

Technical Information

DMI Viewer

List of Error Codes

[Additional Manual]

Reference Manual This manual can be accessed on your computer. Refer to page 20 on how to access the Reference Manual. Appendix LIMITED USE LICENSE AGREEMENT .......... 35 Hard Disk Backup Function ............................. 37 Hard Disk Data Erase Utility ............................ 41 Specifications ................................................... 42 LIMITED WARRANTY ..................................... 44 Please read these instructions carefully before using this product and save this manual for future use. d e t r a t S g n i t t e G n o i t a r e p O g n i t o o h s e b u o r T l i x d n e p p A Customer's Record Dealer's Name Dealer's Address Model No.*

Serial No. or Code No. Date of Purchase

* For the Model No., insert the 12 digit number (for example, CF-29HTLGZBM) located on the bottom of the computer. d Introduction e t r a t S g n i t t e G Thank you for purchasing the Panasonic computer. Read the operating instructions thoroughly for proper operation of your new computer. Illustrations and Terminology in this Manual NOTE:

CAUTION:

Enter :

Fn + F5 :

[start] - [Run]:

NOTE provides a useful fact or helpful information. CAUTION indicates a condition that may result in minor or moderate injury. This illustration means to press the [Enter] key. This illustration means to press and hold the [Fn] key, then press the [F5] key. This illustration means to click [start], then to click [Run]. For some applications, you may need to double-

click. Where to go for referred information. This illustration means to refer to the Reference Manual, which is available on your computer. Refer to page 20 on how to access this manual. Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. The CD/DVD drive is a description about drives, such as DVD-ROM, CD-ROM, CD-R/RW, and DVD-ROM & CD-R/

RW drives. This manual covers two types of models, as distinguished by the type of LCD screen (models with touchscreen and models without touchscreen). If the user has logged on without the administrator authority, some functions may not be executable, and some screens may be not displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions. Confirm the latest information on optional products in catalogs, etc. In this manual, Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies is indicated as Windows or Windows XP. Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Pentium and PROSet are either registered trademarks or trademarks of Intel Corporation. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. 2 Read Me First For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced ra-

dio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC RF Exposure Warning:

This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specifically recommended when they become available. Other third-party wireless transmitters have not been RF ex-

posure evaluated for use with this computer and may not com-

ply with FCC RF exposure requirements.

<Only for models with wireless LAN>

This equipment complies with FCC radiation exposure lim-

its set forth for an uncontrolled environment. This equipment has been approved for mobile operation, and unless otherwise advised in separate supplemental instruc-

tions for individual wireless transmitter(s), requires minimum 20 cm spacing be provided between antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission. This equipment is provided with external antenna connector(s) for connection to optional Car Mounter or Port Replicator for mobile external mounted antenna(s). External antenna(s) must be professionally installed and cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters. Also, user must maintain minimum 20 cm spacing between external antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

<Only for models with wireless LAN>

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful in-

terference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675) FCC Regulation Notice for modem This equipment contains a FCC approved modem. Manufacturer of modem: AMBIT Microsystems Corporation Model No. T60M283.** (** = numbers or alphabet letters) Tested To Comply With FCC Standards FOR HOME OR OFFICE USE d e t r a t S g n i t t e G 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number

(REN) for this equipment. If required, this information must be provided to the telephone company. 2. An FCC compliant telephone cord and modular plug is pro-

vided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring us-

ing a compatible modular jack which is Part 68 compliant. See Installation Instructions for details. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. 4. If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 5. The telephone company may take changes in its facilities, equipment, operations or procedures that could affect the op-

eration of the equipment. If this happens the telephone com-

pany will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. 6. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1-800-LAPTOP5

(1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. 7. There are no user serviceable parts contained in this equip-

8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is sub-

ject to state tariffs. ment. 3 Read Me First 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine un-

less such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used. 10.According to the FCCs electrical safety advisory, we rec-

ommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone com-

panies report that electrical surges, typically lightning tran-

sients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major na-

tionwide problem. Caution: To reduce the risk of fire, use only No.26 AWG or larger tele-

communication line cord. ATTENTION: Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure. For Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT ATTACHMENT LIMITATIONS NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer d e t r a t S g n i t t e G 4 Notice for the products using LCD This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some compo-

nents. Disposal of these materials may be regulated in your com-

munity due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>

UL1604-conforming model. (The model which has de-

scription of UL1604 in the bottom of the computer.) THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D OR NON-HAZ-

ARDOUS LOCATIONS ONLY. WARNING EXPLOSION HAZARD SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2. When connecting and using a device manufactured by a third party, enquire to the manufacturer as to whether the device suits CLASS I, DIVISION 2. RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identifie le matriel homologu. Cette tiquette certifie que le matriel est conforme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences tech-

niques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise locale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est pos-

sible que la conformit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situ-

ations. Les rparations de matriel homologu doivent tre coordonnes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutilisateur de dbrancher un appareil la suite de rparations ou de modifications effectues par lutilisateur ou cause de mauvais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les fils de mise la terre de la source dnergie lectrique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est particulirement importante dans les rgions rurales. Avertissement: Lutilisateur ne doit pas tenter de faire ces raccordements lui-mme; il doit avoir recours un service dinspection des installations lectriques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface. La terminaison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condi-

tion que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur

<Only for models with wireless LAN/GPS>

Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interfer-

ence that may cause undesired operation of the device.

<Only for models with wireless LAN>

This product (local network devices) for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN de-

vices. CSA C22 2 NO.213-conforming model. (The model which has description of CSA C22 2 NO.213 in the bottom of the computer.) THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D OR NON-HAZ-

ARDOUS LOCATIONS ONLY. WARNING EXPLOSION HAZARD SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2. When connecting and using a device manufactured by a third party, enquire to the manufacturer as to whether the device suits CLASS I, DIVISION 2. For Europe

(For models with a CE mark on the bottom of the computer) Declaration of Conformity (DoC) Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:

If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact to our web address: http://doc.panasonic-tc.de Network connection. The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks Technical Features. The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbits/s

- Maximum bitrate sending mode: 33.6 kbit/s This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Netherlands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.

Compliance Notice - CE Mark This equipment is in conformance with the requirements of the European Council Directive listed below:

73/23/EEC Low Voltage Directive with amendment 93/68/EEC 89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC 1999/5/EC

d e t r a t S g n i t t e G 5 Read Me First Important Safety Instructions / Importantes Mesures De Scurit When using your telephone equipment, basic safety precau-

tions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the follow-

ing:

1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Certaines mesures de scurit doivent tre prises pendant l'utilisation de matrial tlphonique afin de rduire les risques d'incendie, de choc lectrique et de blessures. En voici quelquesunes:

1.Ne pas utiliser l'appareil prs de l'eau, p.ex., prs d'une baignoire, d'un lavabo, d'un vier de cuisine, d'un bac laver, dans un sous-sol humide ou prs d'une piscine. 2.Avoid using a telephone (other than a cordless type) dur-

ing an electrical storm. There may be a remote risk of elec-

tric shock from lightning. 3.Do not use the telephone to report a gas leak in the vicin-

ity of the leak. 4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special dis-

posal instructions. 2.viter d'utiliser le tlphone (sauf s'il s'agit d'un appareil sans fil) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3.Ne pas utiliser l'appareil tlphonique pour signaler une fuite de gaz s'il est situ prs de la fuite. 4.Utiliser seulement le cordon d'alimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux rglements pertinents quant l'limination des piles. SAVE THESE INSTRUCTIONS CONSERVER CES INSTRUCTIONS Information to the User Lithium Battery Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or mis-

application may possibly occur. Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes comme la date et l'heure notamment. Elle ne devra tre remplace que par un technicien qualifi. Avertissement! Risque d'explosion en cas de non respect de cette mise en garde!

<Only for models with wireless LAN>

This product and your Health This product, like other radio devices, emits radio frequency elec-

tromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emit-

ted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in ra-

dio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific commu-

nity and result from deliberations of panels and committees of scientists who continually review and interpret the extensive re-

search literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible rep-

resentatives of the organization. These situations may for example include:

Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wire-

less devices in a specific organization or environment (e.g. air-

ports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The cor-

rection of interference caused by such unauthorized modifica-

tion will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. d e t r a t S g n i t t e G 6 Precautions Precautions (Battery Pack) The CF-29 was developed based on thorough research into the real-world portable computing environments. Exhaustive pursuit of usability and reliability under harsh conditions led to innova-

tions such has the magnesium alloy exterior, vibration damped hard disk drive and floppy disk drive, flexible internal connec-

tions. The CF-29s outstanding engineering has been tested us-

ing the strict MIL-STD- 810F (for vibration and shock) and IP

(for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid any damage. The following usage and handling proce-

dures are recommended. Before putting the computer away, be sure to wipe off any moisture. Avoid Radio Frequency Interference Do not place the computer near a television or radio receiver. Avoid Magnetic Fields Keep the computer away from magnets. Data stored on the hard disk may be lost. Keep Small Objects Away Do not insert paper clips or other small objects into the computer. Do Not Disassemble the Computer Do not attempt to disassemble your computer. Avoid Excessive Force on the Display Do not apply excessive downward force on the display when it is completely opened, especially when plugs and/or cables are connected to the rear of the computer. Avoiding Low-temperature Burns Avoid more than casual contact with any heat pro-

ducing area of the notebook computer, AC adap-

tor, and any option or accessory you use with it. Even low heat, if warmer than body temperature, can cause a burn, if the skin is exposed to the heat source for a long period of time. Do not touch the computer and cable when it starts thundering Do not connect a telephone line, or a network cable other than the one specified, into the LAN port If the LAN port is connected to a network such as the ones listed below, a fire or electric shock may result. Networks other than 100BASE-TX or 10BASE-T Telephone lines Internal phone lines (on-premise switches) Digital public phones Phone lines other than those listed above Care should be exercised with regard to the following in or-

der to avoid the possibility of overheating, fire or damage. Avoid Heat Do not throw the battery pack into a fire or ex-

pose it to excessive heat. Keep Articles Away Do not place the battery pack together with articles such as necklaces or hairpins when carrying or stor-

ing. Do Not Disassemble Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, or modify it. Do Not Short Do not short the positive (+) and negative (-) con-

tacts. Avoid Extreme Heat, Cold and Direct Sunlight Do not charge, use or leave the battery pack for ex-

tended periods where it will be exposed to direct sunlight, in a hot place (in an automobile on a sunny day, for example), or in a cold place. Do Not Put into a Microwave Do not put the battery pack into a microwave oven or a pressurized chamber. Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, remove it from the computer or charger and stop using it. Do Not Use With Any Other Computer The battery pack is rechargeable and was intended for the specified computer or charger. Do not use it with a computer other than the one for which it was designed. Do not use this computer with a battery pack other than the one specified (the one included with the computer or the specified battery pack sold separately) Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet. d e t r a t S g n i t t e G 7 Read Me First Precautions (Battery Pack) If the battery pack will not be used for a long period of time

(a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place. This computer prevents overcharging of the battery by re-

charging only when the remaining power is less than approx. 95% of capacity. The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE The battery pack may become warm during recharging or normal use. This is completely normal. Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 C to 50 C {32F to 122 F}). (

Bat-

tery Power) Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Re-

charging takes longer than usual when the temperature is 10 C {50 F} or below.) If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. This computer has a high temperature mode function that prevents the degradation of the battery in high tempera-

ture environments. (

Battery Power) A level corresponding to a 100% charge for high temperature is approximately equivalent to an 80% charge level for nor-

mal temperature mode. The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharg-

ing do not restore its performance, the battery pack should be replaced with a new one. When transporting a spare battery inside a package, brief-

case, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. Always power off the computer when it is not in use. Leav-

ing the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. d e t r a t S g n i t t e G 8 Names and Functions of Parts The illustrations shown may differ from the actual physical appearances. LCD

(Only for models with touchscreen:

Touchscreen) Function Keys For information on the key combinations avail-

able (

Key Combinations). Keyboard Touch Pad page 19)

Power Switch POWER Hard Disk Drive

Hard Disk Drive) HDD PC Card Slots

PC Cards) CAUTION Do not allow metallic objects or magnetic media to come in close proximity to this area. Modem

Modem) DC IN 15.6V USB Devices) DC-IN Jack USB Port

Depending on the shape of the plug, some USB devices cannot be connected to the USB port. In this case, use a commercially-available USB ex-

tension cable. LAN

LAN) CAUTION Do not connect the modem telephone cable into the LAN port. d e t r a t S g n i t t e G

<Only for models with wireless LAN>

Wireless LAN Antenna

Wireless LAN) Multimedia Pocket (Floppy Disk Drive)

Multimedia Pocket) LED Indicators

LED Indicators) Caps lock Numeric key lock (NumLk) Scroll lock (ScrLk) Multimedia pocket device status Hard disk drive status Power status of the multimedia pocket LED Indicators

Battery pack status LED Indicators) Power status Carrying Handle For enhanced portability and in-the-field efficiency. Battery Pack

Battery Power) A lithium ion battery that is recyclable powers the product you have pur-

chased. Please call 1-

800-8-BATTERY for in-

formation on how to re-

cycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-

800-8-BATTERY. 9 Names and Functions of Parts Headphone Jack Use this connector to connect headphones or amplifier-

equipped speakers. Audio output from the internal speaker is dis-

abled when headphones or exter-

nal speakers are connected. USB Devices) USB Port

Depending on the shape of the plug, some USB devices cannot be connected to the USB port. In this case, use a commercially-available USB extension cable. Security Lock A Kensington cable can be connected to prevent theft of your com-

puter. For more information, read the manual that comes with the cable. LOCK d e t r a t S g n i t t e G Microphone Jack Use only a monaural condenser microphone (miniature jack). Using an input source other than a monaural condenser microphone may not allow audio to be input or may damage the equipment. NOTE When using an external microphone, do not remove the check mark for Mute under Microphone Balance of the Volume Control dialog box and do not increase the playback volume. Howling may result. Howling may occur in the same way when disconnecting an external microphone. (The microphone of Volume Control is in the state of mute at the time of factory shipment. This is not shown at the time of factory shipment.) RAM Module Slot

RAM Module) CAUTION Do not cover the computer with a thick cloth, such as a blan-

ket. 10 External Display Port

External Display) Parallel Port Serial Port Expansion Bus Connector

Port Replicator)

<Only for models with wireless LAN>

External Antenna Connector The external antenna connector is for use as an exten-

sion in the future. CAUTION FCC RF Exposure Warning:

The optional Car Mounter may be configured to have 1 or 2 matching unique antenna passive pass-

thru connectors, which would be hard-wired con-

nected to its rear panels 1 or 2 external TNC antenna connectors. Depending upon exact computer configuration, the wireless LAN external antenna connector should be connected to recommended Radiall/

Larsen wireless LAN antenna, type MS3E2400TNC with 3 dBi antenna gain. The other antenna connector is intended for li-

censed radio service external antenna and must be professionally installed. Supplemental instructions will be provided for any employed licensed radio service and will provided external antenna recommended maxi-

mum antenna dBi gain. Speaker To adjust the volume:

Fn + F5 / Fn + F6 Speaker on/off : Fn + F4 CAUTION Do not allow metallic objects or magnetic media to come in close proximity to the speaker on the bottom surface of the computer. Because the speaker contains a magnet, metal objects may become attached to the bottom surface of the computer. This may cause the computer to be unstable, or may mark the sur-

face of the desk on which it is sitting. If floppy disks, magnetic memory cards, or other magnetic media approach the speaker, there is a risk that data will be destroyed. First-time Operation Read the steps below to help you learn what parts are included, and to gain an understanding of some basic computer-related operations. 1 Confirm the inclusion of all parts. Make sure the parts shown in the figure have been supplied. If any of these items are missing or are not working properly, contact Panasonic Technical Support. AC Adaptor................................ 1 AC Cord ..................................... 1 Model No : CF-AA1653A Battery Pack .............................. 1 Modem Telephone Cable .......... 1 Model No : CF-VZSU29 Operating Instructions (This book)*1 .......................................................... 1 Windows Book ...................................................................................... 1 Product Recovery CD-ROM ................................................................... 3

<Only for models with touchscreen>

Soft Cloth .................................. 1 Stylus ..................................... 1

*1 If additional instructions are included with the computer, be sure to read them. It may be neces-

sary to perform additional operations during the following procedures.

Touchscreen) 2 Read the LIMITED USE LICENSE AGREEMENT. (

page 35) Be sure to read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computers packaging. 3 Insert the battery pack. 1 Unlock the cover by sliding the latch to the right. 2 Slide the latch down, and then without releasing it, open the cover as illustrated. Latch Cover d e t r a t S g n i t t e G 11 First-time Operation 3 Slide the battery pack inward until it is firmly in place. CAUTION Do not touch the terminals on the battery pack and the computer. The battery pack may no longer function properly if the contacts are dirty or damaged. Also, the computer may not operate properly. Be sure to insert the battery pack as illustrated. 4 Close the cover until it clicks into place. 5 Lock the cover by sliding the latch to the left. CAUTION Confirm that the latch lock is correctly in place. If you carry your computer without the latch lock in place, the battery pack may fall out. Before using the battery pack, carefully read Precautions (Battery Pack)

page 7-8). 4 Connect your computer to a power outlet. CAUTION Be sure the AC adaptor is connected until completing the first-time use opera-

tion. When using the computer for the first time, do not connect any peripheral de-

vice except the battery pack and AC adaptor to the computer. Handling the AC adaptor Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the specified AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer. When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed. 5 Open the display. 1 Pull the carrying handle forward. 2 Press the latch as illustrated. 3 Lift up the latch and open the display. 6 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indi-

cator turns on before releasing it. CAUTION Do not slide the power switch and hold it for more than four seconds; this will cause the power to be turned off forcibly. Do not slide the power switch repeatedly. Once the computer is powered off, you must wait at least ten seconds before powering it on again. 4 3 d e t r a t S g n i t t e G 5 DC-IN Jack DC IN 15.6 V DC Plug Latch 3 2 1 Power Indicator 12 Power Switch POWER 7 Setup Windows. Moving the cursor ( ) or clicking buttons can be performed with the touch pad. NOTE The touchscreen does not work properly during the Windows setup. CAUTION Do not press any keys or touch the touch pad until [Windows XP Professional Setup] is displayed. 1 At [Welcome to the Windows XP Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I dont accept this agreement], then select [Next]. NOTE If [I dont accept this agreement] is selected, the Windows setup will be aborted. Select settings for your region, then select [Next]. 3 4 Enter your name and organization and then select [Next]. 5 Enter your computer name and administrator password and then select [Next]. CAUTION Remember this password! If the password is forgotten, Windows cannot be operated. d e t r a t S g n i t t e G 6 Enter the correct date, time and time zone, then select [Next]. The computer will restart. NOTE It may take some time before the computer restarts and the screen of step 7 is displayed. Wait, and do not press any keys, or touch the touch pad, etc. 7 Enter your administrator password and select

. Wait until the hard disk drive indicator (

) has turned off. NOTE When Windows setup is completed, the following message will be displayed at the bottom right of the screen: Your computer might be at risk. Continue to the next step. The message is generated by the [Security Center] function in [Control Panel], and does not indicate an error or malfunction. For more information about [Se-

curity Center]:

page 22. 8 <Only for models with touchscreen>

Calibrate the touchscreen. 1 Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -

[TouchScreen] - [Calibration]. second. 2 Touch the + mark on the calibration screen with the stylus (included) for about one 3 After the calibration procedure is executed (e.g., after the nine + marks are touched), the procedure ends when Enter is pressed. 4 Select [OK]. 13 First-time Operation 9 Create a new account. 1 Select [start] - [Control Panel] - [User Accounts] - [Create a new account]. 2 Enter a name for the new account, then select [Next]. 3 Select [Computer administrator], then select [Create Account]. 4 <When you want to create a password for the new account>

Select the new account you have created and select [Create a password]. Follow the instructions on the screen to create a password. 5 Select [start] - [Turn Off Computer] - [Restart] to restart the computer. CAUTION Remember this password! If the password is forgotten, Windows cannot be oper-

ated. You can create a password reset disk beforehand (

page 15). NOTE When creating a new user account:

If you make mail settings, create password reset disks (

page 15), or conduct other related operations before creating the user account, you will be unable to use any pre-

vious mail history or settings. When you create the first new account, you can only select [Computer administrator]. Once a Computer Administrator account has been created, you can create additional limited user accounts. Note also that only the added user account will be displayed in the Welcome screen. The account for the administrator created during Windows setup will not be displayed. The message Your computer might be at risk, which is displayed at the bottom right of the screen, is generated by the Security Center function in Windows XP, and does not indicate an error or malfunction. To prevent this message from being displayed, select select [Turn on Automatic Updates]. About the Icon Enlarger:

If the characters or icons on the screen are too small and difficult to see, after complet-

ing step 9, select [start] - [All Programs] - [Panasonic] - [Icon Enlarger]. This will allow you to magnify the display of characters and icons on the screen. The [Icon Enlarger] can be set separately for each account. You can also use [Loupe Utility], which enlarges a part of the screen.(

Utility)

(red icon) on the taskbar, then Loupe

<Only for models with wireless LAN>

If you use the wireless LAN, be sure to refer to the Reference Manuals Wireless LAN. This concludes the first-time use operation guidelines. d e t r a t S g n i t t e G 14 Information for Windows XP Depending on the Windows settings, installed applications, and drivers, menus and other displays may differ, or some functions (such as use of the password reset disk) may be inop-

erable. Check with your system administrator for details. You can select Classic view for the Control Panel or select the Classic Start menu. You can also change the way a user logs on or off. The procedure in this manual uses the method or view of the Windows XP default setting

(not Classic view or Classic Start menu etc.). Resetting the password Windows XP has a function to reset a forgotten password. To use this function, you need to create a password reset disk beforehand following the steps below. 1 Select [start] - [Control Panel] - [User Accounts]. 2 Select [Prevent a forgotten password] from the [Related Tasks] menu of the account you have logged on to, and create a password reset disk following the on-screen instructions. Store the password reset disk in a safe place. Only the logon password for each account can be reset. The password set in the Setup Utility (

Setup Utility) cannot be reset. d e t r a t S g n i t t e G 15 Starting Up/Shutting Down Starting Up Latch 3 2 1 Power Indicator Power Switch POWER 1 Open the display. 1 Pull the carrying handle forward. 2 Press the latch as illustrated. 3 Lift up the latch and open the display. 2 Turn your computer on. Slide the power switch and hold it for approximately one second until the power indicator turns on before releasing it.

) has turned CAUTION Under the condition that both the AC adaptor and the port replicator are not con-

nected, the power will not go on if the display is closed. While booting, avoid the following until the hard disk drive indicator (

off. Connecting or disconnecting the AC adaptor. Touching the power switch. Performing any keyboard, touch pad, touchscreen (only for models with touch-

screen), or external mouse operations. Closing the display. Once the computer is powered off, you must wait at least ten seconds before pow-

ering it on again. When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support. NOTE When the power is turned on in a low-temperature environment, sometimes the message Warming up the system. Please wait... is displayed (up to 20 minutes) or the battery indicator alternately blinks green and orange. This function is designed to prevent hard disk drive malfunctions that may occur at low temperatures. Wait for the computer to start up. If [Enter Password] is displayed Enter your password*1 and press Enter . (

Security Measures) Enter Password [ ]

The correct password Three incorrect attempts or No password for about a minute

*1 Supervisor Password or User Password set in the Setup Utility (not the Windows password). Will Start Will Not Start

(Power off) n o i t a r e p O 16 3 Log on to Windows. After confirming that the hard disk drive indicator (

input the password, then select not operate.

) has turned off, select the user and

. Until the correct password is entered, the computer will 4 Select your application. You are able to start working on your computer. NOTE The power saving function is factory set, so if there is no input from a key, the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hiber-

nation mode. The computer will resume by sliding the power switch. (

Standby/Hibernation Functions) n o i t a r e p O 17 Starting Up/Shutting Down Shutting Down (power off your computer) 1 Save important data and close each application. 2 Select [start] - [Turn Off Computer]. 3 Select [Turn Off]. Your computer will power off automatically. Restarting your computer (without shutting down) Select [Restart]. To shut down using the keyboard;

Press

, U , and select [Turn Off] with U . CAUTION Do not do the following during the shutdown/restart procedure. Connecting or disconnecting the AC adaptor. Touching the power switch. Performing any keyboard, touch pad, touchscreen (only for models with touch-

screen), or external mouse operations. Closing the display. NOTE To quickly resume computer operation after shutting down, The standby or hibernation function is available (

Functions). When you leave the computer or interrupt your work... If you use the Standby or Hibernation function, then when you turn on the power next time, the application software and files you were using before will be displayed, and you can restart the same operations immediately (

Standby/

Hibernation Functions). Standby/Hibernation 4 Close the display until the latch clicks into place. n o i t a r e p O 18 Touch Pad (Basic Operation) Work Surface Use the touch pad to move the cursor on the screen and perform computer operations. For instructions on how to operate, refer to Touch Pad. Function Moving the Cursor Touch Pad Operation Move the tip of your finger lightly over the surface. Right Button Left Button Tapping/Clicking Double-Tapping/

Double-Clicking Dragging tapping double-tapping or or or clicking double-clicking Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. While holding down the button, moving your finger on the work surface. n o i t a r e p O Handling the Touch Pad By design the touch pad is to be used with a finger tip only. Do not place any object on the work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard ob-

jects that can leave marks (e.g., pencils and ball point pen). Try to avoid having any harmful substances such as oil, come in contact with the touch pad. The cursor may not work properly in such cases. When the touch pad becomes dirty:

Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. 19 Reference Manual The Reference Manual and the Important Tips can be accessed on your computer. When a printer is connected, these manuals can also be printed. Reference Manual The Reference Manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works, and other useful information.

(Refer to the cover of this manual for a list of the main contents included.) How to access the Reference Manual Select [Reference Manual] in [start]. Important Tips Important Tips provides information on how to maximize use of the battery pack, which is necessary for computing away from your home or office.

<Only for models with touchscreen>

It also offers helpful explanations on how to use the touchscreen more effectively. How to access the Important Tips Select Important Tips can also be accessed from [start] - [All Programs] - [Panasonic] - [On-

Line Manuals] - [Important Tips]. on the desktop. When the Reference Manual or Important Tips is started up for the first time, the License Agree-

ment of the Adobe Reader may be displayed. If it is displayed, after reading the agreement, select

[Accept] to access the Reference Manual or Important Tips. Refer to Adobe Reader Help to use the Adobe Reader. NOTE Illustrations may be difficult to view depending on the magnification. If the illustration is too small, magnify the display. If a printer is connected, we recommend printing the pages required. The illustrations and display samples may not be printed with a high quality. n o i t a r e p O 20 Useful Information Usage Environment Environment Operation: Temperature: 5 C to 35 C {41 F to 95 F}

Storage:

Humidity : 30% to 80% RH (No condensation) Temperature: -20 C to 60 C {-4 F to 140 F}

Humidity : 30% to 90% RH (No condensation) Even within the temperature and humidity ranges noted above, using the computer for long periods of time in an environment with exceptionally low or high temperatures or high humidity may result in deterioration of the product, which can lead to a reduction in product life. NOTE Only use the computer within the allowable temperature range. When the computer is left powered on in a low temperature environment, set [Turn off hard disks] to [Never] in the following menu to avoid damage to the hard disk drive.

[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]

Places not to use your computer Such areas may result in damage to the computer. Areas with electronic equipment These areas may interfere with your display or cause your computer to produce strange sounds. Areas with extremely high/low temperatures Do not leave things near the computer that are sensitive to heat. During operation, the computer may become warm. Before putting the computer away, be sure to wipe off any moisture. Handling This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful when handling. When carrying the computer, be sure to keep to the following:

Turn off the computer. Remove all external devices, cables, and PC Cards sticking out of the computer (see the figure on the left) before transporting the computer. Do not drop or hit your computer against solid objects. Do not place the computer upright or allow it to tip over. When the computer receives extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become inoperable. Do not carry the computer while the display is open, or carry it by gripping the display. Do not put anything (e.g., a piece of paper) between the display and keyboard. When taking an airplane, always carry your computer with you. Never check it in with luggage. Before using the computer inside an airplane, we recommend asking the airlines regarding their policy on this issue. Do not leave a disk in the drive while transporting your computer. When transporting spare batteries inside a package, briefcase, etc., it is recommended that the batteries be stored in a plastic bag. We recommend the following:

Preparing a fully charged battery pack (and optional charger, if possible). Making backup copies on discs and carrying them with you. n o i t a r e p O 21 Useful Information Maintenance Display

<Models with touchscreen>

Use the Soft Cloth included with the computer. (For more information, refer to Suggestions About Cleaning the LCD Surface that come with the Soft Cloth.) If the Protective Film becomes damaged, it may be time to replace your Protective Film. The Protective Film is a disposable item. To find out the model number of your Protective Film, contact Panasonic Technical Support. (For more information, refer to the Operating Instruc-

tions that come with the Protective Film.) CAUTION Do not touch or use a touchscreen before you re-attach a Protective Film, as you may leave a mark or a scratch on the touchscreen.

<Models without touchscreen>

Avoid using water when cleaning the panel. Ingredients included in water may leave residue and reduce readability of the screen.

<When cleaning dust/dirt>

Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen. Sweep dust/dirt with fine brush, then wipe it with dry soft cloth used for cleaning glasses.

<When cleaning oily surface>

Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with dry soft cloth used for cleaning glasses. Areas excluding the display Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water. CAUTION Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the sur-

face, e.g., discoloration. In addition, do not use commercially-available household clean-

ers and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the com-

puter, it may cause it to work improperly or be damaged. Security Center/Antivirus Protection Use the Windows Security Center function to protect Windows from damage by computer viruses, etc. Windows Security Center What is Windows Security Center?

The Windows Security Center allows centralized management of Windows security infor-

mation, and monitors antivirus measures and other Windows security settings to ensure optimum safety. Use the Windows Security Center function to protect your computer from damage by vi-

ruses, etc. Select [start] - [Control Panel] - [Security Center] to display the current settings for the following security functions. Windows Firewall A security system for protecting the computer from unauthorized access via the Internet or other external networks. The firewall regulates the data exchanged between the computer and the external net-

work, so that only approved data can pass through. At the time of purchase, the Windows Firewall is set to be enabled. n o i t a r e p O 22 Automatic Updates Virus Protection If your computer is connected to the Internet, this function regularly checks whether secu-

rity updates and other important updates have been made available, and automatically installs these updates in their latest conditions. This function regularly checks whether antivirus software has been installed in the com-

puter, and whether the version of that software is the latest version available. If the message Your computer might be at risk is displayed Read the message, select This message, which the Windows Security Center (

related settings regularly, will be displayed until the settings are made more properly.

(red icon) on the taskbar, and make the appropriate settings. page 22) displays to confirm the security-

Computer Viruses Windows Update NOTE This message does not indicate an error. You can use the computer while the message is displayed. However, in order to operate the computer more safely, we recommend mak-

ing the appropriate measures to reduce damage from virus and other attacks, thus avoid-

ing the appearance of this message. Users are advised to purchase the latest versions of virus protection software and use them regularly. We recommend you run the software:

When booting your computer. After receiving data. We recommend that you check data received on disks or from external sources, such as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress them before running a check). You can use the latest patches and service packs for Windows with the following menus. Do not apply Driver Updates even if a message to update a driver appears. If a driver update is required, contact to Panasonic Technical Support. (

[start] - [All programs] - [Windows Update]

page 44) Saving Data on the Hard Disk Do not expose your computer to shock. Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power off your computer while software applications are running or hard disk drive indicator (

Properly shut Windows down to avoid problems. Save all valuable data to floppy disks, etc. Backing up data to floppy disks, etc. will limit damage should trouble occur to your com-

puter or should you inadvertently change or erase data. Use the security function for all important data. (

Security Measures)

) is on. Hard Disk Lock When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read and write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee complete protection of data.) (

Security Measures) n o i t a r e p O 23 Useful Information Saving Data on Floppy Disks

) is on. Do not power down your computer or press the disk eject button while the Multimedia pocket device indicator (

Doing so may damage the data on the floppy disk and render the floppy disk useless. Use care when handling floppy disks. To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your computer, avoid the following:

Sliding the shutter on the floppy disk manually. Exposing the floppy disk to a magnetic field. Storing the floppy disk in locations prone to high temperatures, low pitched noise, damp-

ness, or dust. Applying more than one label on the floppy disk. Confirm the contents of a floppy disk before formatting it. Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased. Use the write-protect tab. This is a must for preserving important data. This prevents your data from being erased or overwrit-

ten. Write-protect Tab Write Enable Write Disable When Using Peripheral Devices Pay strict attention to the following points to avoid damage to the computer, peripheral devices, cables, etc. Also, in addition to following this manual and the Reference Manual, carefully read the instruction manuals for the peripheral devices being used. Use only peripheral devices that conform to the computers specifications. Connect the devices properly, paying close attention to the condition and position of the connectors. If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc.) . If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully. When Changing Hard Disk Partitions When using the hard disk backup function, divide the hard disk into partitions when a backup area is created.(

page 37) If you divide the hard disk into partitions before creating the backup area, the backup area cannot be created. When Disposing of or Transferring Ownership of This Device When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or use the hard disk data erase utility page 41). (Note that this hard disk data erase utility does not guarantee that data

(included) (

will be completely erased.) Also, note that if you transfer ownership of this device without deleting commercial soft-

ware that you have installed to the hard disk, you may be in violation of the licensing agreement for that software. Wireless LAN (only for models with wireless LAN) To prevent theft of data or unauthorized access to the hard disk via a wireless LAN. If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for data encryption. n o i t a r e p O 24

List of Error Codes When turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below. If the problem persists, or if the error code or message displayed is not shown here, contact Panasonic Technical Support. Error Code/Message 0211: Keyboard error 0251: System CMOS checksum bad - Default configuration used 0271: Check date and time set-

tings 0280: Previous boot incomplete

- Default configuration used 02B0: Diskette drive A error 0613: Serial Port*1 configura-

tion changed 0614: Serial Port*1 config. error

- device disabled

*1 The port name, such as A or B, is displayed, indicating the conflict-

ing ports. Press <F2> to Setup Operating System not found Extended RAM Module Failed Action If an external keyboard or mouse is connected, disconnect these devices. An error has occurred in the memory that stores the Setup Utility settings. This error occurs when the memory content is changed through some inadvertent operation by a program or other function. Run the Setup Utility and load the default values, then change the settings to the appropri-

ate values as needed. If the problem persists, the internal clock battery may need to be replaced. Contact Pana-

sonic Technical Support. The data and time setting are incorrect. Run the Setup Utility and set the date and time correctly. If the problem persists, the internal clock battery may need to be replaced. Contact Pana-

sonic Technical Support. (

page 44) Startup has failed repeatedly, so the Setup Utility settings have been returned to their default values, and the computer has been restarted. Run the Setup Utility and load the default values, then change the settings to the appropri-

ate values as needed. Disconnect the floppy disk drive and reconnect it. Make sure the drive is secured cor-

rectly. I/O address and IRQ settings are in conflict. Run the Setup Utility and change the settings in [Advanced] menu so there is no port conflicts. Write down the error details and press F2 to run the Setup Utility. Confirm the settings, and change the settings to the appropriate values as needed. The OS is not properly installed on the floppy disk or the hard disk that you are trying to boot from. If the computer cannot be booted from the floppy disk, check the floppy disk drive to ensure that the disk is in fact bootable, and change it to another if not. If the computer cannot be booted from the hard disk, confirm whether the hard disk is properly recognized in [Information] menu of the Setup Utility. If the hard disk is recognized, perform the reinstallation procedure. If not, contact Panasonic Technical Support. If a device is connected to the USB port, disconnect the device, or run the Setup Utility and set [Legacy USB Support] in [Advanced] menu to [Disable]. If the extended RAM module has not been inserted properly, or if an extended RAM module other than one matching the specifications has been inserted, a beep will sound and the message Extended RAM Module Failed will be displayed when turning the power on. In this case, turn the power off, confirm that the extended RAM module meets the specifications, and reinsert it. To run the Setup Utility 1 Restart the computer. 2 Press F2 while [Panasonic] boot screen is displayed soon after the computer begins the startup procedure. g n i t o o h s e l b u o r T 25 Dealing with Problems (Summary) When a problem occurs, refer to this page. The Reference Manual also contains detailed information. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic Technical Support. You can use the PC Information Viewer to check the computers usage status. (

Dealing with Problems (Advanced)) Starting Up The power indicator or bat-

tery indicator is not lit The computer does not op-

erate when a USB device is connected

[Enter Password] is dis-

played POST Startup Error(s) is displayed Windows startup, or an op-

eration is extremely slow The date and time are incor-

rect When resuming from the standby or hibernation mode, [Enter Password]

does not appear even if a password has been set in the Setup Utility When the administrator password is forgotten When Remove disks or other media. Press any key to restart (or a similar mes-

sage) is displayed

[ E x e c u t i n g B a t t e r y Recalibration] screen is dis-

played g n i t o o h s e l b u o r T 26 Check the cable connection for the AC adaptor. Check to see if a fully charged battery is properly installed. Remove the battery pack and disconnect the AC adaptor, then connect them again. The computer may not operate when certain USB devices are connected. Disconnect the USB device, or set [Legacy USB Support] to [Disable] in [Advanced] menu of the Setup Utility. Input your Supervisor Password or User Password. If you have forgotten it, contact Pana-

sonic Technical Support. (

page 25 page 44) Press F9 in the Setup Utility (

Setup Utility). This will restore the Setup Utilitys settings to their default values (except the password settings). Then, the Setup Utility must be run once again for you to input the appropriate operating environment settings. (The processing speed depends on the application software used, so this opera-

tion may not cause the processing speed to increase.) If you install resident software after purchasing this computer, disable the resident software. You can set the date and time using the following menu.

[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]

If you continue to experience problems, the internal battery maintaining the clock may need to be replaced. Contact Panasonic Technical Support. When the computer is connected to a LAN, confirm the date and time of the server. This computer will not correctly recognize the date and time starting from the year 2100 A.D. Even when a password has been set in the Setup Utility, [Enter Password] does not appear when the computer resumes from the standby or hibernation mode. If you want to use the security function when using the standby or hibernation mode, use the Windows password as follows:

1 Select the account to change in [start] - [Control Panel] - [User Accounts] and set the password. 2 Add the check mark for [Prompt for password when computer resumes from standby]

in [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced]. If you have created a password reset disk (

page 15), a message is displayed when you fail to correctly enter the password. Follow the messages instructions and set the pass-

word again by using the password reset disk. If you have not created a password reset disk, after reinstalling, setup Windows and then set the password again. This means a floppy disk that does not contain system startup information has been left in the floppy disk drive. Remove the floppy disk, and press any key. This message may appear when certain USB devices are connected. Remove the USB de-

vice, or set [Legacy USB Support] in [Advanced] menu of the Setup Utility to [Disable]. If the message still appears even after trying the above two measures, this may be an indication that some type of hard disk failure has occurred. Contact Panasonic Technical Support. This screen appears because the Battery Recalibration was canceled before Windows was shut down last. To start up Windows, turn off the computer by sliding the power switch, and then turn it back on again. Starting Up (continued) When the previous item is not the cause Display No display after powering on The power has not been turned off, but after a cer-

tain period of time, there is no display When the battery pack is used, the screen is darker than when the AC adaptor is connected An afterimage appears (e.g., green, red, and blue dots re-

main on the display) or there are dots not displaying the correct colors The screen becomes disor-

dered The external display no longer displays properly When you want to display the fonts or icons at a larger size Press F9 in the Setup Utility (

Utilitys settings to their default values (except the password settings). Try removing all peripheral devices. Check a disk error using the following procedure. 1 Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select Setup Utility). This will restore the Setup

[Properties]. 2 Select [Tools] - [Check Now]. 3 Select [Start] after selecting required items in [Check disk options]. At startup, hold down F8 when [Panasonic] boot screen disappears*1, and release your finger when the Windows Advanced Options Menu is displayed. Start the computer in Safe Mode, and confirm the details of the error.

*1 When [Password on boot] is set to [Enable], [Enter Password] appears after the [Panasonic] boot screen disappears. Hold down F8 soon after inputting the password and pressing Enter . When there is no display to an external display, Check your cable connection to the external display. Confirm your display is powered on. Check the settings for your external display. The display destination may be set to the external display. Try changing the display destination by pressing Fn + F3 . If you want to switch the display destination repeatedly by pressing Fn + F3 , make sure that the display destination has switched completely each time before pressing Fn + F3 again. Press Fn + F2 and adjust the brightness. Has the computer been set to the power-saving mode?

To resume operation of your computer from the condition the power of the display is off

(for energy conservation purposes), press any key unrelated to the direct triggering of a selection, like Ctrl . To save power, your computer may have automatically entered the standby mode (power indicator blinks green) or hibernation mode (power indicator turns off). In such cases, slide the power switch. Press Fn + F2 and adjust the brightness. Note, however, that when the brightness is increased, the battery running time will become shorter. Brightness can be set to separate levels for when the AC adaptor is connected and when it is disconnected. If an image is displayed for a prolonged period of time, an afterimage may appear. This is not a malfunction. The afterimage will disappear when a different screen is displayed. High-precision and advanced technologies are necessary in the production of color liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either fail to light or remain constantly lit (that is, more than 99.998% of elements are function-

ing properly), no defect is considered to exist. The screen display may become distorted if the resolution or number of colors is changed, or if an external display is connected or disconnected while the computer is operating. Restart the computer. When an external display not compatible with the power saving mode is used with the computer, the display may not function correctly when the computer enters the power saving mode. In such cases, turn off the power to the external display. Change the size of the icons, etc. using Icon Enlarger (

To enlarge a part of the screen, use Loupe Utility (

Icon Enlarger). Loupe Utility). g n i t o o h s e l b u o r T 27 Dealing with Problems (Summary) Try changing the display by pressing Fn + F3 . If you continue to experience problems, try changing the display destination in the follow-

ing menu.

[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Extreme Graphics 2 M] - [Devices]

When the [Command Prompt] is set to Full Screen by pressing Alt + Enter , the picture is displayed on one of the screens only. When the window display is restored by pressing Alt + Enter , the picture is displayed on both screens. The display destination cannot be switched while a moving picture such as an MPEG file is playing. Stop playing the moving picture before switching the display destination. Display (continued) During simultaneous dis-

play, one of the screens be-

comes disordered When an a moving picture such as an MPEG file is be-

ing played with Media Player, the display destina-

tion cannot be switched us-

ing Fn + F3 Shutting Down Windows cannot be shut down or restarted If a USB device is connected, try removing it. It may take one or two minutes to shutdown. The battery level is very low (the charge is approx. 9% or less). Connect the AC adaptor. You can use the computer when the battery indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on. Quickly save your data and power off your computer. Remove the battery pack and dis-

connect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. (

pack or charging circuit may be defective. In high temperature mode, the battery is discharging to the level that corresponds to an 80%*1 charge for normal temperature mode. (

Battery Power) Do not re-

move the battery pack while the battery indicator is blinking green.

*1 In high temperature mode, the level that corresponds to an 80% charge for normal temperature page 44) The battery mode is displayed as [100%]. Warming up the system to prevent hard disk drive malfunctions at low temperature. Leave your computer as is. Once the allowable temperature range requirement is satisfied, your computer will start automatically. Battery cannot be recharged temporarily because the internal temperature of the battery pack is outside of the acceptable temperature range for recharging. Once the allowable range requirement is satisfied, charging begins automatically. Your computer can be used normally in this state. Battery Indicator The red indicator lights. The red indicator blinks The green indicator blinks The battery indicator blinks green and orange alternately The orange indicator blinks g n i t o o h s e l b u o r T 28 Touch Pad / Touchscreen (only for models with touchscreen) The cursor cannot be con-

trolled properly The cursor does not move in scrolling area of the touch pad Unable to input using the touch pad Unable to point correctly with the stylus included with the computer Unable to input by touching the display Reference Manual The Reference Manual is not displayed page 30).

, U , and select [Restart] with If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard (Press R ). If the computer does not respond to keyboard commands, read No response

When the Microsoft IntelliMouse Wheel mode or the original mode is set for the touch pad, only scroll operations are possible for the right part or bottom part of the touch pad. In this case, cursor operations are possible by using the work surface excluding the right part or bottom part. When no mode is set, the entire surface of the touch pad can be used for cursor operations. Has the Setup Utility been used to set [Touch Pad] to [Enable]?

When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not be used. Has the touch pad driver been properly installed?

As a result of the physical characteristics of the touchscreen, sometimes the position of the stylus does not match the position of the cursor on the screen. This is not a malfunction. Perform [Calibration] (

Has the Setup Utility been used to set [Touchscreen] to [Enable]?

When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Has the touchscreen driver been properly installed?

page 13). Is Adobe Reader installed?

If you have uninstalled Adobe Reader, install using the following procedures. 1 Select [start] - [Run], input [c:\util\reader\AdbeRdr60_enu_full.exe], then select [OK]. Install Adobe Reader by following the instructions on the screen. 2 Update Adobe Reader to its latest version. If your computer is connected to the Internet, start up Adobe Reader and select [Help]

- [Update]. If your computer is not connected to the Internet, select [start] - [Run], input

[c:\util\reader\Acro-Reader_6.0.2_Update.exe], then select [OK]. Fast User Switching function Some applications may not work properly When switching to a different user with the Fast User Switching function, the following problems may occur. Some applications may not work properly. Key combinations with the Fn key may not work. It may not be possible to set the settings of the display. A serial mouse may not work.

<Only for models with wireless LAN>

Wireless LAN may not work. In this case, log off all users without using Fast User Switching function, and try the operation once more. If the problem persists, restart the computer. g n i t o o h s e l b u o r T 29 Dealing with Problems (Summary) Others No response When trying to play back video files using Windows Media Player, the message

[Codec required] appears, and the file cannot be played back Cannot start a network-

used program, or cannot share files or printers Is it necessary to enable the Windows Firewall?

When Automatic Updates is enabled, will all updates be downloaded (or in-

stalled)?

Security Center warning function does not operate g n i t o o h s e l b u o r T 30 Press Ctrl + Shift + Esc to open Task Manager and close the software application which is not responding. Is there an input screen (e.g., password input screen at startup) hidden behind another window? Use Alt + Tab to check for other windows being displayed. After shutting down by sliding the power switch for more than four seconds, slide the power switch to power on and open the application again. If the program no longer works normally, delete the program using the following menu. Then reinstall the program.

[start] - [Control Panel] - [Add or Remove Programs]

Some video files use a Codec that is not installed as a standard. In these cases, if you play back the video file after connecting to the Internet, the Codec may be downloaded auto-

matically, allowing you to play back the file. If you cannot start up a program or share files, this may be because the Firewall (Win-

dows Firewall) in the Windows Security Center is set to be enabled. If this function is set to be enabled, damage from viruses and other attacks is reduced, but some programs and functions cannot be operated. To use the program or to share files or printers:

You can use programs or other functions without the effects of the Windows Firewall by registering them as an exception in the Windows Firewall settings (it is not necessary to disable the Windows Firewall). Note, however, that if a program is registered as an exception, there is a risk of damage from viruses or other attacks. Before registering a program as an exception, confirm the programs safety with the manufacturer or other reliable source. 1 Select [start] - [Control Panel] - [Security Center] - [Windows Firewall]. 2 Select [Exceptions]. 3 To register a network game or other programs as an exception:

Select [Add Program], select the program, and select [OK]. To set access through a specified port as an exception:

Select [Add Port], set the port, and select [OK]. To set a file or printer as an exception:

Add the check mark for [File and Printer Sharing]. 4 Confirm that there is a check mark for the item to be set as an exception, and select [OK]. The Windows Firewall is a security function designed to protect your computer from unauthorized access via the Internet and other external networks. The firewall regulates the data exchanged between the computer and the external network, so that only approved data can pass through. We recommend that you use your computer with the Firewall enabled to minimize damage from viruses and other malicious attacks. When installing additional commercially available firewall software, we recommend that you disable the Windows Firewall settings, as the new software may interfere with the Windows Firewall functions. For details, refer to the manual accompanying the firewall software to be installed. Only Windows Update programs with a high level of priority will be automatically down-

loaded (or installed). Update programs with a comparatively low level of importance will not be downloaded

(or installed) automatically. Check regularly whether new update programs have become available. The Security Center warning function will not operate if you are using a network domain, for example at a company. Others (continued) Problem with Web page dis-

play (no display; display is completely white; advertise-

ments, logon, and other pop-

ups are not displayed) Images in HTML e-mail messages are not displayed in Outlook Express Cannot read attachment file in Outlook Express (cannot save file) The message Your com-

puter might be at risk is displayed In Windows XP, security functions have been strengthened with regard to Web contents. One of these is the Pop-up Blocker, which may prevent some Web pages from being displayed. If you have any problems with Web page displays (e.g., if a page cannot be displayed correctly on Internet Explorer), check the contents of the message window displayed be-

low the address bar (called the Information Bar). The Information Bar shows the infor-

mation that has been suppressed by Internet Explorer. If the message Pop-up blocked is displayed:

Select the message, and select Temporarily Allow Pop-ups. The blocked Popup will be displayed temporarily. If the message This site might require the following ActiveX control... is displayed:

1 Select the message, and select Install ActiveX Control. 2 Check Name and Publisher on the [Security Warning] screen, and execute the installation. If you cannot find the Information Bar:

If you need to display the page, select the Web page link while pressing Ctrl . The pop-up blocker function will be temporarily disabled. In Windows XP, there is a function that blocks image displays in HTML e-mail messages. To display images in HTML e-mail messages, it is necessary to access the senders server, and this may cause problems in the computer. Preventing these images from appearing can decrease the risk of attack from viruses etc. If you need to display images, select the segment where the message Some pictures have been blocked? is displayed. The images can be displayed temporarily. If a message received in Outlook Express has contained an attachment file with an exten-

sion such as .exe or .scr (potentially unsafe files), Windows XP blocks those files. If you need to read the files, select [Tools] - [Options] - [Security] and remove the check mark from [Do not allow attachments to be saved or opened that could potentially be a virus]. This message is displayed by the Security Center function in Windows XP. The Security Center is a function that monitors the level of safety in Windows security settings in order to operate the computer safely, for example, with regard to antivirus measures. It checks the following three items regularly, and displays messages until the settings are made at an appropriate level of safety. Firewall: Is the Windows Firewall enabled?

Automatic Updates: Is the automatic Windows Update function enabled?

Virus Protection: Has antivirus software been installed, has the latest version of the antivirus software been installed, and is the real-time search function enabled (ON)?

The message Your computer might be at risk is displayed by the Security Center function, and does not indicate an error or malfunction. The "Security Center" function checks the above three items to ensure that your computer can be used safely, and notifies the user if the settings are not at an appropriate level of safety. You can continue to use the computer even if these messages continue to be displayed, but we recommend that you follow the procedures below to minimize damage from viruses. 1 Read the message. 2 Select 3 The [Windows Security Center] screen will be displayed.

(red icon) on the taskbar. Select [Recommendations] in [Firewall] or [Virus Protection], or select [Turn on Auto-

matic Updates] in [Automatic Updates]. If measures are not required, [Recommendations] or [Turn on Automatic Updates] will not be displayed. 4 Execute the appropriate measures, following the instructions in the [Recommendation]

screen. g n i t o o h s e l b u o r T 31 Dealing with Problems (Summary) This message is displayed because the Automatic Updates setting in the Security Cen-

ter is disabled or is not set. (Settings have not been made at the time of purchase.) Automatic Updates is a function that regularly checks whether high-priority update pro-

grams (security updates, etc.) have been provided to Windows Update, and automatically installs these programs to maintain Windows in its latest condition. You can continue using the computer even if these messages continue to be displayed, but we recommend that Automatic Updates is set as [Automatic] to maintain its latest con-

dition. 1 Read the message. 2 Select

(yellow icon) on the taskbar. The [Automatic Updates] screen will be displayed. 3 Select [More Options], and set the Automatic Updates to [Automatic]. Some software applications installed after the time of purchase are not compatible with Windows XP Service Pack 2. Refer to software makers homepage or other sources. If a network-used program is not compatible, also refer to Cannot start a network-used program... (

page 30) Others (continued)

(yellow icon) is dis-

played Some applications do not work properly g n i t o o h s e l b u o r T 32 Reinstalling Software When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on your hard disk to another media or to an external hard disk before running the reinstallation procedure. The reinstallation procedure will return the computer to its original condition. Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost.

(This is not the case when Windows is reinstalled in the first partition.) If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure. Before Reinstallation Preparing Product Recovery CD-ROM (included) Panasonic CD/DVD drive (optional: Confirm the latest information on optional products in catalogs, etc.) Important Before the reinstallation procedure, remove all peripherals (except for the CD/DVD drive). Be sure the AC adaptor is connected until the reinstallation procedure is completed. Reinstalling the multimedia pocket. (

1 Turn off the computer and insert the CD/DVD drive into Multimedia Pocket) 2 Turn on the computer, and press F2 while [Panasonic]

boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Pass-

word. 3 Write down all of the contents of the Setup Utility and then press F9 . At the confirmation message, select [Yes] and press Enter . 4 Select [Boot] menu, then select [CD/DVD Drive] and press F6 until [CD/DVD Drive] is at the top of the

[Boot] menu. 5 Place the disc number one of the recovery CDs into the CD/DVD drive. 6 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart, and this screen should appear.

Select a number

1. [ Recovery 2. [ Erase HDD ] Erase the whole data on HDD for security. 3. [ Backup

] Enable the Backup function.

] Reinstall Windows.

] Cancel. 0. [ Cancel

<When the hard disk backup function has been enabled>

When the message [The Backup function has been en-

abled. If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears, press Y . 7 Press 1 to execute [1.[Recovery]].

(You can cancel this operation by pressing 0 .) The License Agreement screen should appear. 8 Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!]. This screen should appear.

Select a number

Reinstalling : Windows(R) XP Professional 1. Reinstall Windows to the whole HDD to factory default. 2. Make two partitions, for the operating system and data. And reinstall Windows to the operating system partition.

(All existing partitions on HDD will be lost.) 3. Reinstall Windows to the first partition. 0. Cancel

g n i t o o h s e l b u o r T 33 14Press F9 . At the confirmation message, select [Yes] and press Enter . (The Setup Utility settings will return to their default values. Even the security settings with the excep-

tion of the password(s) will return to their default val-

ues.) 15Select [Exit] and then select [Save Current Values], then press Enter . At the confirmation message, select [Yes] and press Enter . 16Turn the computer off by sliding the power switch. NOTE If additional instructions are included with the computer, be sure to read them. It may be necessary to perform additional operations during the following procedures. 17Perform the first-time use operation (

- page 14 step 9). page 12 step 6 18Run the Setup Utility and change the settings where nec-

essary.

<Changing the drive letter>

You can change the drive letter for the CD/DVD drive or hard disk drive by the following steps. Drive letters can only be changed when two or more parti-

tions have been created on the hard disk drive. The name of the C: drive cannot be changed. We recommend that you make these changes before in-

stalling applications. 1 Select [start] - [Control Panel] - [Performance and Mainte-

nance] - [Administrative Tools] - [Computer Management]. 2 Select [Disk Management] from [Storage]. 3 Right click on the partition of the hard disk or the name of the CD/DVD drive and select [Change Drive Letter and Paths...]. 4 Select [Change]. 5 Select [Assign the following drive letter] and the new drive letter, and then select [OK]. 6 At the confirmation message, select [Yes]. Reinstalling Software 9 Make a selection from the menu. NOTE When [2] is selected, the hard disk backup func-

tion cannot be enabled because the hard disk has been divided into partitions. When selecting [2], enter the basic partition size for the operating system installation and press Enter .

(The data partition size is the remainder after subtract-

ing the basic partition size.) To select [3], the initial partition size must be 6 GB or more of the hard disk size. Reinstallation cannot be per-

formed with a small partition size.

<When the hard disk backup function has been enabled>

If you select [1] or [2], the message [The Backup function has been enabled. If [Recovery] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears. In this case, press Y . If the message [Computer must be rebooted in order to execute [Recovery.]] appears, press R . 10At the confirmation message , press Y . The operation of reinstallation for the hard disk starts au-

tomatically. (The operations take about 15 minutes.) CAUTION Do not interrupt the reinstallation procedure be-

fore completion, for example by turning off the computer or pressing Ctrl + Alt + Del , as this may prevent Windows from starting up, or may cause data to be lost so that the reinstallation pro-

cedure cannot be executed. When a message appears instructing you to insert the next CD, insert the recovery CD showing the next number in the sequence, and then select [OK]. If the message [The media does not contain the cor-

rect file] appears, select [OK]. A message will ap-

pear instructing you to insert the next CD. Confirm that the proper recovery CD has been in-

serted by opening the cover of the CD/DVD drive and then close the cover, then select [OK]. 11After the reinstallation procedure completes, this screen should appear. Remove the recovery CD, and then press any key. The computer will be shut down.

[Recovery] is complete. Windows(R) XP Professional install wizard will start after reboot. Please remove the Product Recovery CD-ROM, and turn off the computer.

12Remove the CD/DVD Drive. 13Turn on the computer, and press F2 while [Panasonic]

boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Pass-

word. g n i t o o h s e l b u o r T 34 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. B. C. D. E. F. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, owner-

ship nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. You may use the Programs only on the single Product which was accompanied by the Programs. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMIT-

TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions therefor set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intel's propri-

etary rights in the product. i x d n e p p A 35 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en li-

cence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles ci-

dessous. En utilisant les logiciels, vous vous engagez de manire dfinitive respecter les termes, clauses et conditions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. B. C. D. E. F. MEI vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les Logiciels conformment aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis-

-vis des algorithmes, concepts, dessins, configurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, la proprit et les droits resteront tous MEI ou leurs propritaires. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. Vous et vos employs ou agents tes requis de protger la confidentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de MEI. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documenta-

tion les accompagnant pour quelque fin que ce soit, lexception dune (1) copie des Logiciels des fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. Vous ne pouvez retirer aucune marque de droits dauteur, marque de commerce ou autre ni aucune identification de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modifier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dfinies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre communication entre nous, relativement lobjet du prsent contrat. i x d n e p p A 36 Hard Disk Backup Function The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk contents or restore backed up contents to their original locations. By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from operational errors or other factors. Also, you can back up or restore hard disk contents using this computer alone, without having to use other media or peripheral devices. At the time of purchase, the hard disk backup function is disabled. If you follow the procedure below to create a backup area, the hard disk backup function will be enabled, and you will be able to back up your data. Note, that once the backup function has been enabled, you will have to perform the reinstallation procedure to disable it again (

page 33). The hard disk backup function cannot back up or restore data properly if there is a problem with the hard disk when the data is backed up or restored. Note that if an error occurs while data is being restored, whether as a result of an unexpected malfunction, incorrect operation, or other reason, the data in the hard disk (data before restoration) may be lost. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including loss of data) as a result of the use of this function. Preparing Product Recovery CD-ROM (included) Panasonic CD/DVD drive (optional: Confirm the latest information on optional products in cata-

logs, etc.) Before Using a Hard Disk Backup Function Disconnect or remove all peripheral devices (except for the CD/DVD drive), as the backup area may not be created properly while these devices are connected. Be sure the AC adaptor is connected to the computer. A backup area cannot be created if the hard disk is already divided into several partitions. Return the computer to its condition at the time of purchase (one partition only), and create the backup area. To divide the partition, make the selection when the backup area is created (

page 38 step 8). If the partition configuration is changed (partitions created, size changed, etc.) after the backup area has been created, it will no longer be possible to execute the backup function. To change the configuration, it is necessary to return the computer to its condition at the time of purchase, and then create the backup area again. The hard disk backup function will only work for the internal hard disk. This function does not work with an external hard disk or the second hard disk (optional). Backup and restore functions will not operate if the hard disk has been damaged. Do not use the NTFS file system compression function, as this may result in insufficient capacity of the backup area. If the hard disk malfunctions, it will be impossible to read the data stored on it. We recommend that you also back up important data to a location other than the hard disk (an external hard disk or other media). Execute a disk error check using the following procedure. 1 Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select [Properties]. 2 Select [Check Now] from [Tools]. 3 In [Check Disk], select [Start] without adding a check mark beside any of the items. If a message is displayed indicating that there is an error in the disk, display [Check Disk], and add a check mark for [Automatically fix file system errors] and [Scan for and attempt recovery of bad sectors], select [Start], and check for disk errors again. The hard disk backup function does not accommodate dynamic disks. Do not convert the hard disk to a dynamic disk. i x d n e p p A 37 Hard Disk Backup Function NOTE Regarding backup area Requires availability of at least half of the entire hard disk. Without sufficient space available, the backup area cannot be created. When the backup area is created, the usable hard disk capacity will be reduced to less than half. The backup area cannot be accessed from Windows. For this reason, backed up data cannot be copied to CD-R or other removable disk media. When the hard disk backup function is executed, data in the backup area will be over-

written. If newly created or edited data is backed up later, data stored previously in the backup area will be lost. Create a Backup Area 1 Turn off the computer and insert the CD/DVD drive into the multimedia pocket. (

Multimedia Pocket) 2 Turn on the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will then start. If a password has been set, enter the Supervisor Password. You cannot register [Boot] menu with a User Password. 3 Select [Boot] menu, then select [CD/DVD Drive] and press F6 until [CD/DVD Drive] is at the top of the [Boot] menu. 4 Place the disk number one of the recovery CDs into the CD/DVD drive. 5 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart. If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User Password. This screen should appear.

Select a number

1. [ Recovery 2. [ Erase HDD ] Erase the whole data on HDD for security. 3. [ Backup

] Enable the Backup function.

] Reinstall Windows. 0. [ Cancel

] Cancel. 6 Press 3 to execute [3.Backup]. CAUTION When dividing the hard disk into partitions Do not execute [1. Recovery] to divide the hard disk into partitions. The hard disk backup function cannot be enabled after the hard disk has been partitioned. Use procedure 8 to divide the hard disk. 7 At the confirmation message, press Y . 8 Select how to divide the hard disk from the menu.

<To create a backup area and enable the backup function without dividing the hard disk>

Select [1].

[At the time of purchase]

[After the backup area is created]

The usable hard disk area The backup area Can be accessed from Windows (One partition). Cannot be accessed from Windows. i x d n e p p A 38

<To create a backup area and divide hard disk into two partitions, for OS and data>

Select [2], enter the partition size (GB), and press Enter . You can cancel this operation by pressing 0 . The data partition size will be the maximum settable size less the number entered above. The maximum settable size will differ depending on models.

[At the time of purchase]

[After the backup area is created]

The usable hard disk area The backup area Can be accessed from Windows (Two partitions). Cannot be accessed from Windows. 9 When the confirmation message is displayed, press Y . The backup area is then created. 10When the message [You must reboot in order to enable the Backup function] appears, remove the recovery CD, and press any key to restart the computer. The computer is restarted, then the backup process will begin. 11 When the message [[Backup] is complete] appears, press Ctrl + Alt + Del to restart the computer. CAUTION Do not press Ctrl + Alt + Del until the message is displayed. 12After logging on to Windows, a message will appear advising that a new device has been in-

stalled and that the computer must be restarted to enable the settings. Select [Yes] to restart the computer. NOTE The [Boot] menu in the Setup Utility is set to start up from the CD/DVD drive. Change this setting if necessary. The next time the backup or restore functions are executed, follow the procedure for [Backing Up and Restoring Data] (

below). Backing Up and Restoring Data CAUTION Before executing the backup function, execute a disk error check (

Do not interrupt the backup or restore functions before completion, for example by turning off the power or pressing Ctrl + Alt + Del , as this may prevent Windows from starting up, or may cause data to be lost so that the backup and restore functions cannot be executed. page 37). 1 Turn the computer on, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will start up. If a password has been set, enter the Supervisor Password or the User Password. 2 Select [Exit] menu, then select [Hard Disk Backup / Restore] and press Enter . At the confirmation message, select [Yes] and press Enter . i x d n e p p A 39 Hard Disk Backup Function

(When dividing the hard disk into two partitions, select the backup method at next screen.) 3 Select the operation to be executed from the menu.

<To back up hard disk contents to the backup area>

1 Press 1 to execute [1. [Backup]]. 2 At the confirmation message, press Y . The backup process will begin.

<To restore backed up contents to the hard disk>

1 Press 2 to execute [2. [Restore]]. 2 At the confirmation message, press Y . The restore process will begin.

(When data is backed up in two partitions, select the restore method at next screen.) NOTE The time required to complete the backup or restore process differs depending on the data volume. 4 When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press Ctrl + Alt + Del to restart the computer. If the backup or restore process was interrupted before completion, for example if the power was turned off, execute the process again. After logging on to Windows, when a new device is installed and a message appears advising that the computer must be restarted to enable the settings, select [Yes] to restart the computer. CAUTION When the hard disk backup function has been enabled, the backed up data will not be erased even if a commercial data erasing utility or similar software is used to erase all data from user-accessible area. You can use the hard disk data erase utility included in this computer page 41) to erase all data on the hard disk, including backed up data. Use this hard disk

data erase utility before disposing of or transferring ownership of this computer. Occasionally, the message [#1805 cannot write image file] will be displayed, and the backup function will be interrupted. If this error occurs, execute the backup function again. After this, if the backup function is completed properly, then there is no problem in the hard disk. To disable the hard disk backup function Perform the reinstallation procedure. All data in the backup area and the hard disk will be erased. Conduct steps 1-8 for [Reinstalling Software] (

reinstallation at the screen for executing the reinstallation. When [1] is selected, the hard disk backup function can be disabled. When [2] is selected, the hard disk backup function can be disabled, but in this case, because the hard disk has been divided into partitions, the hard disk backup function cannot be re-enabled (

When [3] is selected, the hard disk backup function cannot be disabled. page 33). Select [1] or [2] to execute the page 24). i x d n e p p A 40 Hard Disk Data Erase Utility This computer is equipped with a utility for erasing hard disk data. When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data by following the steps below. The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunctions or other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility. Preparing Product Recovery CD-ROM (included) Panasonic CD/DVD drive (optional: Confirm the latest information on optional products in catalogs, etc.) NOTE Be sure the AC adaptor is connected until the procedure is completed. This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks or the second hard disk (optional). This utility cannot erase data from damaged disk. This utility cannot erase data for specific partitions. After executing this utility, the computer cannot be booted from the hard disk. The backup area and the data in the backup area will be erased. Procedure 1 Turn off the computer. 2 Insert the CD/DVD drive into the multimedia pocket.

Multimedia Pocket) 3 Turn on the computer, and press F2 while [Panasonic]

boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password. 4 Select [Boot] menu, then select [CD/DVD Drive] and press F6 until [CD/DVD Drive] is at the top of [Boot] menu. 5 Place the disc number one of the recovery CDs into the CD/DVD drive. 6 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart, and this screen should appear.

Select a number

1. [ Recovery 2. [ Erase HDD ] Erase the whole data on HDD for security. 3. [ Backup

] Enable the Backup function.

] Reinstall Windows.

] Cancel. 0. [ Cancel

<When the hard disk backup function has been enabled>

When the message [The Backup function has been en-

abled. If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears, press Y . 7 Press 2 to execute [2. [Erase HDD]].

(You can cancel this operation by pressing 0 .)

<When the hard disk backup function has been enabled>

When the message [The Backup function has been en-

abled. If [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] ap-

pears, press When the message [Computer must be rebooted in order to execute [Erase HDD.]] appears, press R . Y . 8 At the confirmation message, press Y . 9 When [<<<Start Menu>>>] is displayed, press Enter . 10The approximate time required for erasing data will be displayed. Press Space . 11At the confirmation message, press Enter . The operation of erasing the hard disk will start.

(If necessary, the hard disk data erase operation can be cancelled after it has begun by pressing Ctrl + C . If the operation is cancelled before being completed, a part of data will not be erased.) 12After the operation is complete:

Under normal conditions, the message [Hard disk data has been deleted.] will be displayed. If a problem occurred during the operation, an error mes-

sage will be displayed. 13Remove the recovery CD, and then press any key to turn off the computer. i x d n e p p A 41 Specifications Main Specifications Model No. CPU Memory Video Memory LCD Type Displayed Colors*3 External Display Hard Disk Drive Keyboard Floppy Disk Drive Slot PC Card Slot Allowable current

(total for two slots) RAM Module Slot*6 Interface Parallel Port External Display Port Serial Port Microphone Jack*7 Headphone Jack Expansion Bus Connector USB Port Modem LAN External Antenna Connector Pointing Device Sound CF-29H3LGZBM CF-29J3LGZBM CF-29HTQGZBM CF-29JTQGZBM CF-29HTLGZBM CF-29JTLGZBM Intel Pentium M Processor 738 (1.40 GHz, 2 MB*1 L2 cache, 400 MHz FSB) 256 MB*1 (1280 MB*1 Max.) 512 MB*1 (1536 MB*1Max.) UMA (64 MB*1 Max.)*2 13.3 XGA type (TFT) with Touchscreen 65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots) 256 MB*1 (1280 MB*1 Max.) 13.3 XGA type (TFT) 65,536/16,777,216 colors

(800 x 600 dots/1024 x 768 dots) 60 GB*5 80 GB*5 65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots/1280 x 1024 dots/

1600 x 1200 dots)*4 60 GB*5 87 keys 720 KB/1.44 MB (two-mode) Two Type I or Type II, or one Type III 3.3 V: 400 mA 5 V: 400 mA 200 pin, 2.5 V, SO-DIMM, DDR SDRAM, PC2700 Compliant Dsub 25-pin female Mini Dsub 15-pin female Dsub 9-pin male Miniature jack, 3.5 DIA Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW x 2 Dedicated 80-pin female 4-pin x 2, USB 2.0 RJ-11 jack, Data: 56 kbps (V.92 & K56flex*8) FAX:14.4 kbps RJ-45 jack, IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Dedicated 50 coaxial connector Touch Pad Touchscreen (Anti-Reflection, Stylus (included) touch capable) WAVE and MIDI playback, Monaural Speaker (built in) Touch Pad

*1 1 MB = 1,024 bytes

*2 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user.

*3 A 16,777,216 color display is achieved by using the dithering function.

*4 Maximum resolution depends on the specifications of the external display.

*5 1GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.

*6 Only a RAM card designed for PC2700 can be added.

*7 Use only a monaural condenser microphone.

*8 The settings for the K56flex modem need to be changed according to the AT command. i x d n e p p A 42 Main Specifications Model No. Battery Pack Operating Time*9 Charging Time*9 Power On Power Off Clock Battery AC Adaptor*12 Input Output Power Consumption*13 Environment Operation Temperature Storage Humidity Temperature Humidity Physical Dimensions (W x H x D) Weight (including the carrying handle) CF-29H3LGZBM CF-29J3LGZBM CF-29HTQGZBM CF-29JTQGZBM CF-29HTLGZBM CF-29JTLGZBM Li-ion 11.1 V, 6.6 Ah Main battery: Approx. 5 hours - 8 hours*10 (Approx. 7 hours*11) Main battery + Second battery: Approx. 8 hours - 13.5 hours*10 (Approx. 10.5 hours*11) Main battery: Approx. 7 hours Main battery + Second battery: Approx. 11 hours Main battery: Approx. 4 hours Main battery + Second battery: Approx. 7 hours Coin type lithium battery 3.0 V 100 V - 240 V AC, 50 Hz/60 Hz 15.6 V DC, 5.0 A Approx. 35 W*14 / Approx. 60 W (maximum when recharging in the ON state) 5 C to 35C {41 F to 95 F}

30% to 80% RH (No condensation)

-20 C to 60 C {-4 F to 140 F}

30% to 90% RH (No condensation) 302 mm x 64.3 mm x 273 mm (excluding protrusion) {11.9 " x 2.6 " x 10.7 "}

Approx. 3.62 kg {Approx. 7.98 lb.}

Approx. 3.49 kg

{Approx. 7.7 lb.}

*9 Varies depending on the usage conditions, CPU speed, etc.

*10 Measured using BatteryMark Version 4.0.1 (LCD brightness: Maximum - Minimum)

*11 Measured using MobileMark 2002 (LCD brightness: 60 cd/m2)

*12 <Only for North America>

The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compatible AC cord.

*13 Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is off. Approx. 1.5 W when the Wake up from LAN function has been enabled.

*14 Rated power consumption Wireless LAN Model No. Data transfer rates Standards supported Transmission method Wireless channels used RF frequency band Software Operating System Utility Programs

*15 Only for models with wireless LAN

*16 The Product Recovery CD-ROM is required. CF-29JTLGZBM/CF-29JTQGZBM/

CF-29J3LGZBM CF-29HTLGZBM/CF-29HTQGZBM/

CF-29H3LGZBM IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps

(automatically switched) IEEE802.11b: 11/5.5/2/1 Mbps

(automatically switched) IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps

(automatically switched) IEEE802.11a/IEEE802.11b/IEEE802.11g OFDM system, DSSS system IEEE802.11a: Channels 36 to 64, 149 to 165 IEEE802.11b/IEEE802.11g: Channels 1 to 11 IEEE802.11a: 5.18~5.32 GHz, 5.725~5.825 GHz IEEE802.11b/IEEE802.11g: 2412~2462 MHz Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies (NTFS File System) Setup Utility DMI Viewer Adobe Reader Intel PROSet/Wireless Software*15 Panasonic Hand Writing PC Information Viewer Hard Disk Backup Utility*16 Hard Disk Data Erase Utility*16 Icon Enlarger Loupe Utility Hotkey Settings i x d n e p p A 43 LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for a period of one (1) year from the date of purchase. This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God. Limits and Exclusions:

There are no other express warranties except as listed below. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your satisfaction, then write to the Consumer Affairs Division at the address indicated below. SOFTWARE LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonics entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any Program. DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEG-

LIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIP-

MENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules. i x d n e p p A 44

To obtain service or technical assistance within the continental U.S.A. and Alaska. DIAL TOLL FREE: 1-800-LAPTOP5 Correspondence requesting product information should be sent to: Panasonic Computer Solutions Company, 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Whole Product (except Batteries), AC adaptor and CD-ROM

(if factory installed) Batteries, CD-ROM (unless factory installed), Port Replicator, Extra Memory Modules and all other Peripherals, Options and Accessories Period of Coverage Three (3) Years from Date of Original End User Customer Purchase One (1) Year from Date of Original End User Customer Purchase Type of Failure Coverage Defective Materials or Workmanship Defective Materials or Workmanship Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-

tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-

TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. i x d n e p p A 45 Memo i x d n e p p A 46 i x d n e p p A 47 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. Panasonic Computer Solutions Company, 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 2004 Matsushita Electric Industrial Co., LTD. All Rights Reserved. Printed in Japan FJ1204-0 DFQX5492ZA

Model No. CF-29HNPO7KX Addendum .

@ This computer is not equipped with PC Card Slots function and Product Recovery CD-ROM.

+ The information related to PC Card Slots and Product Recovery CD-ROM shown in the Operating Instructions and Ref-

erence Manual do not apply to this computer. Names and Functions of Parts OPERATING INSTRUCTIONS Add the following DataTAC Antenna.